diff --git a/ChangeLog b/ChangeLog index b8c15342137..ae12f7384aa 100644 --- a/ChangeLog +++ b/ChangeLog @@ -2936,4 +2936,12 @@ module for testing the on-module SST 25 chip using the NXFFS file system. * arch/arm/src/lpc43xx and arch/arm/include/lpc43xx: The NXP LPC43xx port is slowly evolving in these directories. + * configs/stm3210e-eval/pm: Add a new configuration for testing STM32 power + management. + * configs/stm3210e-eval/scripts: Moved all of the duplicate ST3210-EVAL + linker scripts into one set of linker scripts at this location. + * configs/stm3210e-eval/src/up_buttons.c, up_lcd.c, and up_pm.c: New logic + for testing STM32 power management. + + diff --git a/arch/arm/src/stm32/Make.defs b/arch/arm/src/stm32/Make.defs index cae6bfc5777..cff2546ee27 100644 --- a/arch/arm/src/stm32/Make.defs +++ b/arch/arm/src/stm32/Make.defs @@ -85,11 +85,10 @@ CHIP_CSRCS += stm32_idle.c endif CHIP_CSRCS += stm32_pmstop.c stm32_pmstandby.c -ifeq ($(CONFIG_PM),y) + ifneq ($(CONFIG_PM_CUSTOMINIT),y) CHIP_CSRCS += stm32_pminitialize.c endif -endif ifeq ($(CONFIG_STM32_ETHMAC),y) CHIP_CSRCS += stm32_eth.c diff --git a/arch/arm/src/stm32/stm32_bkp.h b/arch/arm/src/stm32/stm32_bkp.h index 8436dbf62b7..21399c38bd2 100644 --- a/arch/arm/src/stm32/stm32_bkp.h +++ b/arch/arm/src/stm32/stm32_bkp.h @@ -1,8 +1,8 @@ /************************************************************************************ * arch/arm/src/stm32/stm32_bkp.h * - * Copyright (C) 2009 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt + * Copyright (C) 2009, 2012 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions @@ -45,4 +45,8 @@ #include "chip.h" #include "chip/stm32_bkp.h" +/************************************************************************************ + * Pre-processor Definitions + ************************************************************************************/ + #endif /* __ARCH_ARM_SRC_STM32_STM32_BKP_H */ diff --git a/arch/arm/src/stm32/stm32_pwr.c b/arch/arm/src/stm32/stm32_pwr.c index 6a4e62d6623..bada048e3e9 100644 --- a/arch/arm/src/stm32/stm32_pwr.c +++ b/arch/arm/src/stm32/stm32_pwr.c @@ -48,6 +48,10 @@ #if defined(CONFIG_STM32_PWR) +/************************************************************************************ + * Pre-processor Definitions + ************************************************************************************/ + /************************************************************************************ * Private Functions ************************************************************************************/ diff --git a/arch/arm/src/stm32/stm32f10xxx_rtc.c b/arch/arm/src/stm32/stm32f10xxx_rtc.c index 0b01ecd6909..03be0ee3f0d 100644 --- a/arch/arm/src/stm32/stm32f10xxx_rtc.c +++ b/arch/arm/src/stm32/stm32f10xxx_rtc.c @@ -6,7 +6,7 @@ * * With extensions, modifications by: * - * Copyright (C) 2011 Gregory Nutt. All rights reserved. + * Copyright (C) 2011-2012 Gregory Nutt. All rights reserved. * Author: Gregroy Nutt * * Redistribution and use in source and binary forms, with or without @@ -68,6 +68,7 @@ #include #include #include +#include #include "up_arch.h" diff --git a/arch/arm/src/stm32/stm32f40xxx_rtc.c b/arch/arm/src/stm32/stm32f40xxx_rtc.c index c19521695dc..f92d46b1660 100644 --- a/arch/arm/src/stm32/stm32f40xxx_rtc.c +++ b/arch/arm/src/stm32/stm32f40xxx_rtc.c @@ -631,7 +631,7 @@ int up_rtcinitialize(void) #endif g_rtc_enabled = true; - rtc_dumpregs("After Initialzation"); + rtc_dumpregs("After Initialization"); return OK; } diff --git a/configs/stm3210e-eval/README.txt b/configs/stm3210e-eval/README.txt index 671c4f6bf7e..aea32dffbd2 100755 --- a/configs/stm3210e-eval/README.txt +++ b/configs/stm3210e-eval/README.txt @@ -187,7 +187,7 @@ DFU and JTAG of FLASH (0x08000000) but will be offset to 0x08003000. This offset is needed to make space for the DFU loader and 0x08003000 is where the DFU loader expects to find new applications at boot time. If you need to change that origin for some - other bootloader, you will need to edit the file(s) ld.script.dfu for each + other bootloader, you will need to edit the file(s) ld.script.dfu for the configuration. The DFU SE PC-based software is available from the STMicro website, diff --git a/configs/stm3210e-eval/RIDE/Make.defs b/configs/stm3210e-eval/RIDE/Make.defs index c47b270b670..c6a1ed0fb7c 100644 --- a/configs/stm3210e-eval/RIDE/Make.defs +++ b/configs/stm3210e-eval/RIDE/Make.defs @@ -81,14 +81,14 @@ ifeq ($(WINTOOL),y) MKDEP = $(TOPDIR)/tools/mknulldeps.sh ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}" - ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/RIDE/$(LDSCRIPT)}" + ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}" MAXOPTIMIZATION = -O2 else # Linux/Cygwin-native toolchain MKDEP = $(TOPDIR)/tools/mkdeps.sh ARCHINCLUDES = -I. -isystem $(TOPDIR)/include ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx - ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/RIDE/$(LDSCRIPT) + ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT) endif CC = $(CROSSDEV)gcc diff --git a/configs/stm3210e-eval/buttons/Make.defs b/configs/stm3210e-eval/buttons/Make.defs index 17899c06908..40ea698c4d1 100644 --- a/configs/stm3210e-eval/buttons/Make.defs +++ b/configs/stm3210e-eval/buttons/Make.defs @@ -1,7 +1,7 @@ ############################################################################ # configs/stm3210e-eval/buttons/Make.defs # -# Copyright (C) 2009 Gregory Nutt. All rights reserved. +# Copyright (C) 2009, 2012 Gregory Nutt. All rights reserved. # Author: Gregory Nutt # # Redistribution and use in source and binary forms, with or without @@ -81,14 +81,14 @@ ifeq ($(WINTOOL),y) MKDEP = $(TOPDIR)/tools/mknulldeps.sh ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}" - ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/buttons/$(LDSCRIPT)}" + ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}" MAXOPTIMIZATION = -O2 else # Linux/Cygwin-native toolchain MKDEP = $(TOPDIR)/tools/mkdeps.sh ARCHINCLUDES = -I. -isystem $(TOPDIR)/include ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx - ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/buttons/$(LDSCRIPT) + ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT) endif CC = $(CROSSDEV)gcc diff --git a/configs/stm3210e-eval/buttons/ld.script b/configs/stm3210e-eval/buttons/ld.script deleted file mode 100644 index 56a96aee66c..00000000000 --- a/configs/stm3210e-eval/buttons/ld.script +++ /dev/null @@ -1,112 +0,0 @@ -/**************************************************************************** - * configs/stm3210e-eval/buttons/ld.script - * - * Copyright (C) 2011 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name NuttX nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************/ - -/* The STM32F103ZET6 has 512Kb of FLASH beginning at address 0x0800:0000 and - * 64Kb of SRAM beginning at address 0x2000:0000. When booting from FLASH, - * FLASH memory is aliased to address 0x0000:0000 where the code expects to - * begin execution by jumping to the entry point in the 0x0800:0000 address - * range. - */ - -MEMORY -{ - flash (rx) : ORIGIN = 0x08000000, LENGTH = 512K - sram (rwx) : ORIGIN = 0x20000000, LENGTH = 64K -} - -OUTPUT_ARCH(arm) -ENTRY(_stext) -SECTIONS -{ - .text : { - _stext = ABSOLUTE(.); - *(.vectors) - *(.text .text.*) - *(.fixup) - *(.gnu.warning) - *(.rodata .rodata.*) - *(.gnu.linkonce.t.*) - *(.glue_7) - *(.glue_7t) - *(.got) - *(.gcc_except_table) - *(.gnu.linkonce.r.*) - _etext = ABSOLUTE(.); - } > flash - - _eronly = ABSOLUTE(.); - - /* The STM32F103Z has 64Kb of SRAM beginning at the following address */ - - .data : { - _sdata = ABSOLUTE(.); - *(.data .data.*) - *(.gnu.linkonce.d.*) - CONSTRUCTORS - _edata = ABSOLUTE(.); - } > sram AT > flash - - .ARM.extab : { - *(.ARM.extab*) - } >sram - - __exidx_start = ABSOLUTE(.); - .ARM.exidx : { - *(.ARM.exidx*) - } >sram - __exidx_end = ABSOLUTE(.); - - .bss : { - _sbss = ABSOLUTE(.); - *(.bss .bss.*) - *(.gnu.linkonce.b.*) - *(COMMON) - _ebss = ABSOLUTE(.); - } > sram - - /* Stabs debugging sections. */ - .stab 0 : { *(.stab) } - .stabstr 0 : { *(.stabstr) } - .stab.excl 0 : { *(.stab.excl) } - .stab.exclstr 0 : { *(.stab.exclstr) } - .stab.index 0 : { *(.stab.index) } - .stab.indexstr 0 : { *(.stab.indexstr) } - .comment 0 : { *(.comment) } - .debug_abbrev 0 : { *(.debug_abbrev) } - .debug_info 0 : { *(.debug_info) } - .debug_line 0 : { *(.debug_line) } - .debug_pubnames 0 : { *(.debug_pubnames) } - .debug_aranges 0 : { *(.debug_aranges) } -} diff --git a/configs/stm3210e-eval/buttons/ld.script.dfu b/configs/stm3210e-eval/buttons/ld.script.dfu deleted file mode 100644 index 3515087e149..00000000000 --- a/configs/stm3210e-eval/buttons/ld.script.dfu +++ /dev/null @@ -1,111 +0,0 @@ -/**************************************************************************** - * configs/stm3210e-eval/buttons/ld.script.dfu - * - * Copyright (C) 2009, 2011 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name NuttX nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************/ - -/* The STM32F103ZET6 has 512Kb of FLASH beginning at address 0x0800:0000 and - * 64Kb of SRAM beginning at address 0x2000:0000. Here we assume that the - * STM3210E-EVAL's DFU bootloader is being used. In that case, the corrct - * load .text load address is 0x08003000 (leaving 464Kb). - */ - -MEMORY -{ - flash (rx) : ORIGIN = 0x08003000, LENGTH = 464K - sram (rwx) : ORIGIN = 0x20000000, LENGTH = 64K -} - -OUTPUT_ARCH(arm) -ENTRY(_stext) -SECTIONS -{ - .text : { - _stext = ABSOLUTE(.); - *(.vectors) - *(.text .text.*) - *(.fixup) - *(.gnu.warning) - *(.rodata .rodata.*) - *(.gnu.linkonce.t.*) - *(.glue_7) - *(.glue_7t) - *(.got) - *(.gcc_except_table) - *(.gnu.linkonce.r.*) - _etext = ABSOLUTE(.); - } > flash - - _eronly = ABSOLUTE(.); - - /* The STM32F103Z has 64Kb of SRAM beginning at the following address */ - - .data : { - _sdata = ABSOLUTE(.); - *(.data .data.*) - *(.gnu.linkonce.d.*) - CONSTRUCTORS - _edata = ABSOLUTE(.); - } > sram AT > flash - - .ARM.extab : { - *(.ARM.extab*) - } >sram - - __exidx_start = ABSOLUTE(.); - .ARM.exidx : { - *(.ARM.exidx*) - } >sram - __exidx_end = ABSOLUTE(.); - - .bss : { - _sbss = ABSOLUTE(.); - *(.bss .bss.*) - *(.gnu.linkonce.b.*) - *(COMMON) - _ebss = ABSOLUTE(.); - } > sram - - /* Stabs debugging sections. */ - .stab 0 : { *(.stab) } - .stabstr 0 : { *(.stabstr) } - .stab.excl 0 : { *(.stab.excl) } - .stab.exclstr 0 : { *(.stab.exclstr) } - .stab.index 0 : { *(.stab.index) } - .stab.indexstr 0 : { *(.stab.indexstr) } - .comment 0 : { *(.comment) } - .debug_abbrev 0 : { *(.debug_abbrev) } - .debug_info 0 : { *(.debug_info) } - .debug_line 0 : { *(.debug_line) } - .debug_pubnames 0 : { *(.debug_pubnames) } - .debug_aranges 0 : { *(.debug_aranges) } -} diff --git a/configs/stm3210e-eval/composite/Make.defs b/configs/stm3210e-eval/composite/Make.defs index a8936b6566b..b20f69e4526 100755 --- a/configs/stm3210e-eval/composite/Make.defs +++ b/configs/stm3210e-eval/composite/Make.defs @@ -81,14 +81,14 @@ ifeq ($(WINTOOL),y) MKDEP = $(TOPDIR)/tools/mknulldeps.sh ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}" - ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/usbstorage/$(LDSCRIPT)}" + ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}" MAXOPTIMIZATION = -O2 else # Linux/Cygwin-native toolchain MKDEP = $(TOPDIR)/tools/mkdeps.sh ARCHINCLUDES = -I. -isystem $(TOPDIR)/include ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx - ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/usbstorage/$(LDSCRIPT) + ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT) endif CC = $(CROSSDEV)gcc diff --git a/configs/stm3210e-eval/composite/ld.script b/configs/stm3210e-eval/composite/ld.script deleted file mode 100755 index f31c66d72de..00000000000 --- a/configs/stm3210e-eval/composite/ld.script +++ /dev/null @@ -1,112 +0,0 @@ -/**************************************************************************** - * configs/stm3210e-eval/composite/ld.script - * - * Copyright (C) 2012 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name NuttX nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************/ - -/* The STM32F103ZET6 has 512Kb of FLASH beginning at address 0x0800:0000 and - * 64Kb of SRAM beginning at address 0x2000:0000. When booting from FLASH, - * FLASH memory is aliased to address 0x0000:0000 where the code expects to - * begin execution by jumping to the entry point in the 0x0800:0000 address - * range. - */ - -MEMORY -{ - flash (rx) : ORIGIN = 0x08000000, LENGTH = 512K - sram (rwx) : ORIGIN = 0x20000000, LENGTH = 64K -} - -OUTPUT_ARCH(arm) -ENTRY(_stext) -SECTIONS -{ - .text : { - _stext = ABSOLUTE(.); - *(.vectors) - *(.text .text.*) - *(.fixup) - *(.gnu.warning) - *(.rodata .rodata.*) - *(.gnu.linkonce.t.*) - *(.glue_7) - *(.glue_7t) - *(.got) - *(.gcc_except_table) - *(.gnu.linkonce.r.*) - _etext = ABSOLUTE(.); - } > flash - - _eronly = ABSOLUTE(.); - - /* The STM32F103Z has 64Kb of SRAM beginning at the following address */ - - .data : { - _sdata = ABSOLUTE(.); - *(.data .data.*) - *(.gnu.linkonce.d.*) - CONSTRUCTORS - _edata = ABSOLUTE(.); - } > sram AT > flash - - .ARM.extab : { - *(.ARM.extab*) - } >sram - - __exidx_start = ABSOLUTE(.); - .ARM.exidx : { - *(.ARM.exidx*) - } >sram - __exidx_end = ABSOLUTE(.); - - .bss : { - _sbss = ABSOLUTE(.); - *(.bss .bss.*) - *(.gnu.linkonce.b.*) - *(COMMON) - _ebss = ABSOLUTE(.); - } > sram - - /* Stabs debugging sections. */ - .stab 0 : { *(.stab) } - .stabstr 0 : { *(.stabstr) } - .stab.excl 0 : { *(.stab.excl) } - .stab.exclstr 0 : { *(.stab.exclstr) } - .stab.index 0 : { *(.stab.index) } - .stab.indexstr 0 : { *(.stab.indexstr) } - .comment 0 : { *(.comment) } - .debug_abbrev 0 : { *(.debug_abbrev) } - .debug_info 0 : { *(.debug_info) } - .debug_line 0 : { *(.debug_line) } - .debug_pubnames 0 : { *(.debug_pubnames) } - .debug_aranges 0 : { *(.debug_aranges) } -} diff --git a/configs/stm3210e-eval/composite/ld.script.dfu b/configs/stm3210e-eval/composite/ld.script.dfu deleted file mode 100755 index d819bca251b..00000000000 --- a/configs/stm3210e-eval/composite/ld.script.dfu +++ /dev/null @@ -1,111 +0,0 @@ -/**************************************************************************** - * configs/stm3210e-eval/composite/ld.script.dfu - * - * Copyright (C) 2012 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name NuttX nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************/ - -/* The STM32F103ZET6 has 512Kb of FLASH beginning at address 0x0800:0000 and - * 64Kb of SRAM beginning at address 0x2000:0000. Here we assume that the - * STM3210E-EVAL's DFU bootloader is being used. In that case, the corrct - * load .text load address is 0x08003000 (leaving 464Kb). - */ - -MEMORY -{ - flash (rx) : ORIGIN = 0x08003000, LENGTH = 464K - sram (rwx) : ORIGIN = 0x20000000, LENGTH = 64K -} - -OUTPUT_ARCH(arm) -ENTRY(_stext) -SECTIONS -{ - .text : { - _stext = ABSOLUTE(.); - *(.vectors) - *(.text .text.*) - *(.fixup) - *(.gnu.warning) - *(.rodata .rodata.*) - *(.gnu.linkonce.t.*) - *(.glue_7) - *(.glue_7t) - *(.got) - *(.gcc_except_table) - *(.gnu.linkonce.r.*) - _etext = ABSOLUTE(.); - } > flash - - _eronly = ABSOLUTE(.); - - /* The STM32F103Z has 64Kb of SRAM beginning at the following address */ - - .data : { - _sdata = ABSOLUTE(.); - *(.data .data.*) - *(.gnu.linkonce.d.*) - CONSTRUCTORS - _edata = ABSOLUTE(.); - } > sram AT > flash - - .ARM.extab : { - *(.ARM.extab*) - } >sram - - __exidx_start = ABSOLUTE(.); - .ARM.exidx : { - *(.ARM.exidx*) - } >sram - __exidx_end = ABSOLUTE(.); - - .bss : { - _sbss = ABSOLUTE(.); - *(.bss .bss.*) - *(.gnu.linkonce.b.*) - *(COMMON) - _ebss = ABSOLUTE(.); - } > sram - - /* Stabs debugging sections. */ - .stab 0 : { *(.stab) } - .stabstr 0 : { *(.stabstr) } - .stab.excl 0 : { *(.stab.excl) } - .stab.exclstr 0 : { *(.stab.exclstr) } - .stab.index 0 : { *(.stab.index) } - .stab.indexstr 0 : { *(.stab.indexstr) } - .comment 0 : { *(.comment) } - .debug_abbrev 0 : { *(.debug_abbrev) } - .debug_info 0 : { *(.debug_info) } - .debug_line 0 : { *(.debug_line) } - .debug_pubnames 0 : { *(.debug_pubnames) } - .debug_aranges 0 : { *(.debug_aranges) } -} diff --git a/configs/stm3210e-eval/include/board.h b/configs/stm3210e-eval/include/board.h index 8a479a7e543..3e845d3aaab 100755 --- a/configs/stm3210e-eval/include/board.h +++ b/configs/stm3210e-eval/include/board.h @@ -314,6 +314,19 @@ EXTERN int stm32_lm75initialize(FAR const char *devpath); EXTERN xcpt_t stm32_lm75attach(xcpt_t irqhandler); #endif +/**************************************************************************** + * Name: up_pmbuttons + * + * Description: + * Configure all the buttons of the STM3210e-eval board as EXTI, + * so any button is able to wakeup the MCU from the PM_STANDBY mode + * + ****************************************************************************/ + +#if defined(CONFIG_PM) && defined(CONFIG_IDLE_CUSTOM) +EXTERN void up_pmbuttons(void); +#endif + #undef EXTERN #if defined(__cplusplus) } diff --git a/configs/stm3210e-eval/nsh/Make.defs b/configs/stm3210e-eval/nsh/Make.defs index 51d0761fc21..c6009b93d30 100644 --- a/configs/stm3210e-eval/nsh/Make.defs +++ b/configs/stm3210e-eval/nsh/Make.defs @@ -1,7 +1,7 @@ ############################################################################ # configs/stm3210e-eval/nsh/Make.defs # -# Copyright (C) 2009 Gregory Nutt. All rights reserved. +# Copyright (C) 2009, 2012 Gregory Nutt. All rights reserved. # Author: Gregory Nutt # # Redistribution and use in source and binary forms, with or without @@ -81,14 +81,14 @@ ifeq ($(WINTOOL),y) MKDEP = $(TOPDIR)/tools/mknulldeps.sh ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}" - ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/nsh/$(LDSCRIPT)}" + ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}" MAXOPTIMIZATION = -O2 else # Linux/Cygwin-native toolchain MKDEP = $(TOPDIR)/tools/mkdeps.sh ARCHINCLUDES = -I. -isystem $(TOPDIR)/include ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx - ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/nsh/$(LDSCRIPT) + ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT) endif CC = $(CROSSDEV)gcc diff --git a/configs/stm3210e-eval/nsh/ld.script b/configs/stm3210e-eval/nsh/ld.script deleted file mode 100755 index fa7b990bc97..00000000000 --- a/configs/stm3210e-eval/nsh/ld.script +++ /dev/null @@ -1,112 +0,0 @@ -/**************************************************************************** - * configs/stm3210e-eval/nsh/ld.script - * - * Copyright (C) 2009, 2011 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name NuttX nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************/ - -/* The STM32F103ZET6 has 512Kb of FLASH beginning at address 0x0800:0000 and - * 64Kb of SRAM beginning at address 0x2000:0000. When booting from FLASH, - * FLASH memory is aliased to address 0x0000:0000 where the code expects to - * begin execution by jumping to the entry point in the 0x0800:0000 address - * range. - */ - -MEMORY -{ - flash (rx) : ORIGIN = 0x08000000, LENGTH = 512K - sram (rwx) : ORIGIN = 0x20000000, LENGTH = 64K -} - -OUTPUT_ARCH(arm) -ENTRY(_stext) -SECTIONS -{ - .text : { - _stext = ABSOLUTE(.); - *(.vectors) - *(.text .text.*) - *(.fixup) - *(.gnu.warning) - *(.rodata .rodata.*) - *(.gnu.linkonce.t.*) - *(.glue_7) - *(.glue_7t) - *(.got) - *(.gcc_except_table) - *(.gnu.linkonce.r.*) - _etext = ABSOLUTE(.); - } > flash - - _eronly = ABSOLUTE(.); - - /* The STM32F103Z has 64Kb of SRAM beginning at the following address */ - - .data : { - _sdata = ABSOLUTE(.); - *(.data .data.*) - *(.gnu.linkonce.d.*) - CONSTRUCTORS - _edata = ABSOLUTE(.); - } > sram AT > flash - - .ARM.extab : { - *(.ARM.extab*) - } >sram - - __exidx_start = ABSOLUTE(.); - .ARM.exidx : { - *(.ARM.exidx*) - } >sram - __exidx_end = ABSOLUTE(.); - - .bss : { - _sbss = ABSOLUTE(.); - *(.bss .bss.*) - *(.gnu.linkonce.b.*) - *(COMMON) - _ebss = ABSOLUTE(.); - } > sram - - /* Stabs debugging sections. */ - .stab 0 : { *(.stab) } - .stabstr 0 : { *(.stabstr) } - .stab.excl 0 : { *(.stab.excl) } - .stab.exclstr 0 : { *(.stab.exclstr) } - .stab.index 0 : { *(.stab.index) } - .stab.indexstr 0 : { *(.stab.indexstr) } - .comment 0 : { *(.comment) } - .debug_abbrev 0 : { *(.debug_abbrev) } - .debug_info 0 : { *(.debug_info) } - .debug_line 0 : { *(.debug_line) } - .debug_pubnames 0 : { *(.debug_pubnames) } - .debug_aranges 0 : { *(.debug_aranges) } -} diff --git a/configs/stm3210e-eval/nsh/ld.script.dfu b/configs/stm3210e-eval/nsh/ld.script.dfu deleted file mode 100755 index 6b5ab8a2d6d..00000000000 --- a/configs/stm3210e-eval/nsh/ld.script.dfu +++ /dev/null @@ -1,111 +0,0 @@ -/**************************************************************************** - * configs/stm3210e-eval/nsh/ld.script.dfu - * - * Copyright (C) 2009, 2011 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name NuttX nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************/ - -/* The STM32F103ZET6 has 512Kb of FLASH beginning at address 0x0800:0000 and - * 64Kb of SRAM beginning at address 0x2000:0000. Here we assume that the - * STM3210E-EVAL's DFU bootloader is being used. In that case, the corrct - * load .text load address is 0x08003000 (leaving 464Kb). - */ - -MEMORY -{ - flash (rx) : ORIGIN = 0x08003000, LENGTH = 464K - sram (rwx) : ORIGIN = 0x20000000, LENGTH = 64K -} - -OUTPUT_ARCH(arm) -ENTRY(_stext) -SECTIONS -{ - .text : { - _stext = ABSOLUTE(.); - *(.vectors) - *(.text .text.*) - *(.fixup) - *(.gnu.warning) - *(.rodata .rodata.*) - *(.gnu.linkonce.t.*) - *(.glue_7) - *(.glue_7t) - *(.got) - *(.gcc_except_table) - *(.gnu.linkonce.r.*) - _etext = ABSOLUTE(.); - } > flash - - _eronly = ABSOLUTE(.); - - /* The STM32F103Z has 64Kb of SRAM beginning at the following address */ - - .data : { - _sdata = ABSOLUTE(.); - *(.data .data.*) - *(.gnu.linkonce.d.*) - CONSTRUCTORS - _edata = ABSOLUTE(.); - } > sram AT > flash - - .ARM.extab : { - *(.ARM.extab*) - } >sram - - __exidx_start = ABSOLUTE(.); - .ARM.exidx : { - *(.ARM.exidx*) - } >sram - __exidx_end = ABSOLUTE(.); - - .bss : { - _sbss = ABSOLUTE(.); - *(.bss .bss.*) - *(.gnu.linkonce.b.*) - *(COMMON) - _ebss = ABSOLUTE(.); - } > sram - - /* Stabs debugging sections. */ - .stab 0 : { *(.stab) } - .stabstr 0 : { *(.stabstr) } - .stab.excl 0 : { *(.stab.excl) } - .stab.exclstr 0 : { *(.stab.exclstr) } - .stab.index 0 : { *(.stab.index) } - .stab.indexstr 0 : { *(.stab.indexstr) } - .comment 0 : { *(.comment) } - .debug_abbrev 0 : { *(.debug_abbrev) } - .debug_info 0 : { *(.debug_info) } - .debug_line 0 : { *(.debug_line) } - .debug_pubnames 0 : { *(.debug_pubnames) } - .debug_aranges 0 : { *(.debug_aranges) } -} diff --git a/configs/stm3210e-eval/nsh2/Make.defs b/configs/stm3210e-eval/nsh2/Make.defs index 9234a26b6e4..113c2a2b54b 100644 --- a/configs/stm3210e-eval/nsh2/Make.defs +++ b/configs/stm3210e-eval/nsh2/Make.defs @@ -1,7 +1,7 @@ ############################################################################ # configs/stm3210e-eval/nsh2/Make.defs # -# Copyright (C) 2011 Gregory Nutt. All rights reserved. +# Copyright (C) 2011-2012 Gregory Nutt. All rights reserved. # Author: Gregory Nutt # # Redistribution and use in source and binary forms, with or without @@ -81,14 +81,14 @@ ifeq ($(WINTOOL),y) MKDEP = $(TOPDIR)/tools/mknulldeps.sh ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}" - ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/nsh2/$(LDSCRIPT)}" + ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}" MAXOPTIMIZATION = -O2 else # Linux/Cygwin-native toolchain MKDEP = $(TOPDIR)/tools/mkdeps.sh ARCHINCLUDES = -I. -isystem $(TOPDIR)/include ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx - ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/nsh2/$(LDSCRIPT) + ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT) endif CC = $(CROSSDEV)gcc diff --git a/configs/stm3210e-eval/nsh2/ld.script b/configs/stm3210e-eval/nsh2/ld.script deleted file mode 100644 index 109d725ccf8..00000000000 --- a/configs/stm3210e-eval/nsh2/ld.script +++ /dev/null @@ -1,112 +0,0 @@ -/**************************************************************************** - * configs/stm3210e-eval/nsh2/ld.script - * - * Copyright (C) 2011 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name NuttX nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************/ - -/* The STM32F103ZET6 has 512Kb of FLASH beginning at address 0x0800:0000 and - * 64Kb of SRAM beginning at address 0x2000:0000. When booting from FLASH, - * FLASH memory is aliased to address 0x0000:0000 where the code expects to - * begin execution by jumping to the entry point in the 0x0800:0000 address - * range. - */ - -MEMORY -{ - flash (rx) : ORIGIN = 0x08000000, LENGTH = 512K - sram (rwx) : ORIGIN = 0x20000000, LENGTH = 64K -} - -OUTPUT_ARCH(arm) -ENTRY(_stext) -SECTIONS -{ - .text : { - _stext = ABSOLUTE(.); - *(.vectors) - *(.text .text.*) - *(.fixup) - *(.gnu.warning) - *(.rodata .rodata.*) - *(.gnu.linkonce.t.*) - *(.glue_7) - *(.glue_7t) - *(.got) - *(.gcc_except_table) - *(.gnu.linkonce.r.*) - _etext = ABSOLUTE(.); - } > flash - - _eronly = ABSOLUTE(.); - - /* The STM32F103Z has 64Kb of SRAM beginning at the following address */ - - .data : { - _sdata = ABSOLUTE(.); - *(.data .data.*) - *(.gnu.linkonce.d.*) - CONSTRUCTORS - _edata = ABSOLUTE(.); - } > sram AT > flash - - .ARM.extab : { - *(.ARM.extab*) - } >sram - - __exidx_start = ABSOLUTE(.); - .ARM.exidx : { - *(.ARM.exidx*) - } >sram - __exidx_end = ABSOLUTE(.); - - .bss : { - _sbss = ABSOLUTE(.); - *(.bss .bss.*) - *(.gnu.linkonce.b.*) - *(COMMON) - _ebss = ABSOLUTE(.); - } > sram - - /* Stabs debugging sections. */ - .stab 0 : { *(.stab) } - .stabstr 0 : { *(.stabstr) } - .stab.excl 0 : { *(.stab.excl) } - .stab.exclstr 0 : { *(.stab.exclstr) } - .stab.index 0 : { *(.stab.index) } - .stab.indexstr 0 : { *(.stab.indexstr) } - .comment 0 : { *(.comment) } - .debug_abbrev 0 : { *(.debug_abbrev) } - .debug_info 0 : { *(.debug_info) } - .debug_line 0 : { *(.debug_line) } - .debug_pubnames 0 : { *(.debug_pubnames) } - .debug_aranges 0 : { *(.debug_aranges) } -} diff --git a/configs/stm3210e-eval/nsh2/ld.script.dfu b/configs/stm3210e-eval/nsh2/ld.script.dfu deleted file mode 100644 index 6813fe77d7d..00000000000 --- a/configs/stm3210e-eval/nsh2/ld.script.dfu +++ /dev/null @@ -1,111 +0,0 @@ -/**************************************************************************** - * configs/stm3210e-eval/nsh2/ld.script.dfu - * - * Copyright (C) 2011 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name NuttX nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************/ - -/* The STM32F103ZET6 has 512Kb of FLASH beginning at address 0x0800:0000 and - * 64Kb of SRAM beginning at address 0x2000:0000. Here we assume that the - * STM3210E-EVAL's DFU bootloader is being used. In that case, the corrct - * load .text load address is 0x08003000 (leaving 464Kb). - */ - -MEMORY -{ - flash (rx) : ORIGIN = 0x08003000, LENGTH = 464K - sram (rwx) : ORIGIN = 0x20000000, LENGTH = 64K -} - -OUTPUT_ARCH(arm) -ENTRY(_stext) -SECTIONS -{ - .text : { - _stext = ABSOLUTE(.); - *(.vectors) - *(.text .text.*) - *(.fixup) - *(.gnu.warning) - *(.rodata .rodata.*) - *(.gnu.linkonce.t.*) - *(.glue_7) - *(.glue_7t) - *(.got) - *(.gcc_except_table) - *(.gnu.linkonce.r.*) - _etext = ABSOLUTE(.); - } > flash - - _eronly = ABSOLUTE(.); - - /* The STM32F103Z has 64Kb of SRAM beginning at the following address */ - - .data : { - _sdata = ABSOLUTE(.); - *(.data .data.*) - *(.gnu.linkonce.d.*) - CONSTRUCTORS - _edata = ABSOLUTE(.); - } > sram AT > flash - - .ARM.extab : { - *(.ARM.extab*) - } >sram - - __exidx_start = ABSOLUTE(.); - .ARM.exidx : { - *(.ARM.exidx*) - } >sram - __exidx_end = ABSOLUTE(.); - - .bss : { - _sbss = ABSOLUTE(.); - *(.bss .bss.*) - *(.gnu.linkonce.b.*) - *(COMMON) - _ebss = ABSOLUTE(.); - } > sram - - /* Stabs debugging sections. */ - .stab 0 : { *(.stab) } - .stabstr 0 : { *(.stabstr) } - .stab.excl 0 : { *(.stab.excl) } - .stab.exclstr 0 : { *(.stab.exclstr) } - .stab.index 0 : { *(.stab.index) } - .stab.indexstr 0 : { *(.stab.indexstr) } - .comment 0 : { *(.comment) } - .debug_abbrev 0 : { *(.debug_abbrev) } - .debug_info 0 : { *(.debug_info) } - .debug_line 0 : { *(.debug_line) } - .debug_pubnames 0 : { *(.debug_pubnames) } - .debug_aranges 0 : { *(.debug_aranges) } -} diff --git a/configs/stm3210e-eval/nx/Make.defs b/configs/stm3210e-eval/nx/Make.defs index b222f611676..4c8b24b5a47 100644 --- a/configs/stm3210e-eval/nx/Make.defs +++ b/configs/stm3210e-eval/nx/Make.defs @@ -1,7 +1,7 @@ ############################################################################ # configs/stm3210e-eval/nx/Make.defs # -# Copyright (C) 2011 Gregory Nutt. All rights reserved. +# Copyright (C) 2011-2012 Gregory Nutt. All rights reserved. # Author: Gregory Nutt # # Redistribution and use in source and binary forms, with or without @@ -81,14 +81,14 @@ ifeq ($(WINTOOL),y) MKDEP = $(TOPDIR)/tools/mknulldeps.sh ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}" - ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/nx/$(LDSCRIPT)}" + ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}" MAXOPTIMIZATION = -O2 else # Linux/Cygwin-native toolchain MKDEP = $(TOPDIR)/tools/mkdeps.sh ARCHINCLUDES = -I. -isystem $(TOPDIR)/include ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx - ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/nx/$(LDSCRIPT) + ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT) endif CC = $(CROSSDEV)gcc diff --git a/configs/stm3210e-eval/nx/ld.script b/configs/stm3210e-eval/nx/ld.script deleted file mode 100644 index 21d5bcd7fb7..00000000000 --- a/configs/stm3210e-eval/nx/ld.script +++ /dev/null @@ -1,112 +0,0 @@ -/**************************************************************************** - * configs/stm3210e-eval/nx/ld.script - * - * Copyright (C) 2011 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name NuttX nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************/ - -/* The STM32F103ZET6 has 512Kb of FLASH beginning at address 0x0800:0000 and - * 64Kb of SRAM beginning at address 0x2000:0000. When booting from FLASH, - * FLASH memory is aliased to address 0x0000:0000 where the code expects to - * begin execution by jumping to the entry point in the 0x0800:0000 address - * range. - */ - -MEMORY -{ - flash (rx) : ORIGIN = 0x08000000, LENGTH = 512K - sram (rwx) : ORIGIN = 0x20000000, LENGTH = 64K -} - -OUTPUT_ARCH(arm) -ENTRY(_stext) -SECTIONS -{ - .text : { - _stext = ABSOLUTE(.); - *(.vectors) - *(.text .text.*) - *(.fixup) - *(.gnu.warning) - *(.rodata .rodata.*) - *(.gnu.linkonce.t.*) - *(.glue_7) - *(.glue_7t) - *(.got) - *(.gcc_except_table) - *(.gnu.linkonce.r.*) - _etext = ABSOLUTE(.); - } > flash - - _eronly = ABSOLUTE(.); - - /* The STM32F103Z has 64Kb of SRAM beginning at the following address */ - - .data : { - _sdata = ABSOLUTE(.); - *(.data .data.*) - *(.gnu.linkonce.d.*) - CONSTRUCTORS - _edata = ABSOLUTE(.); - } > sram AT > flash - - .ARM.extab : { - *(.ARM.extab*) - } >sram - - __exidx_start = ABSOLUTE(.); - .ARM.exidx : { - *(.ARM.exidx*) - } >sram - __exidx_end = ABSOLUTE(.); - - .bss : { - _sbss = ABSOLUTE(.); - *(.bss .bss.*) - *(.gnu.linkonce.b.*) - *(COMMON) - _ebss = ABSOLUTE(.); - } > sram - - /* Stabs debugging sections. */ - .stab 0 : { *(.stab) } - .stabstr 0 : { *(.stabstr) } - .stab.excl 0 : { *(.stab.excl) } - .stab.exclstr 0 : { *(.stab.exclstr) } - .stab.index 0 : { *(.stab.index) } - .stab.indexstr 0 : { *(.stab.indexstr) } - .comment 0 : { *(.comment) } - .debug_abbrev 0 : { *(.debug_abbrev) } - .debug_info 0 : { *(.debug_info) } - .debug_line 0 : { *(.debug_line) } - .debug_pubnames 0 : { *(.debug_pubnames) } - .debug_aranges 0 : { *(.debug_aranges) } -} diff --git a/configs/stm3210e-eval/nx/ld.script.dfu b/configs/stm3210e-eval/nx/ld.script.dfu deleted file mode 100644 index 3b2a165fbdd..00000000000 --- a/configs/stm3210e-eval/nx/ld.script.dfu +++ /dev/null @@ -1,111 +0,0 @@ -/**************************************************************************** - * configs/stm3210e-eval/nx/ld.script.dfu - * - * Copyright (C) 2011 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name NuttX nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************/ - -/* The STM32F103ZET6 has 512Kb of FLASH beginning at address 0x0800:0000 and - * 64Kb of SRAM beginning at address 0x2000:0000. Here we assume that the - * STM3210E-EVAL's DFU bootloader is being used. In that case, the corrct - * load .text load address is 0x08003000 (leaving 464Kb). - */ - -MEMORY -{ - flash (rx) : ORIGIN = 0x08003000, LENGTH = 464K - sram (rwx) : ORIGIN = 0x20000000, LENGTH = 64K -} - -OUTPUT_ARCH(arm) -ENTRY(_stext) -SECTIONS -{ - .text : { - _stext = ABSOLUTE(.); - *(.vectors) - *(.text .text.*) - *(.fixup) - *(.gnu.warning) - *(.rodata .rodata.*) - *(.gnu.linkonce.t.*) - *(.glue_7) - *(.glue_7t) - *(.got) - *(.gcc_except_table) - *(.gnu.linkonce.r.*) - _etext = ABSOLUTE(.); - } > flash - - _eronly = ABSOLUTE(.); - - /* The STM32F103Z has 64Kb of SRAM beginning at the following address */ - - .data : { - _sdata = ABSOLUTE(.); - *(.data .data.*) - *(.gnu.linkonce.d.*) - CONSTRUCTORS - _edata = ABSOLUTE(.); - } > sram AT > flash - - .ARM.extab : { - *(.ARM.extab*) - } >sram - - __exidx_start = ABSOLUTE(.); - .ARM.exidx : { - *(.ARM.exidx*) - } >sram - __exidx_end = ABSOLUTE(.); - - .bss : { - _sbss = ABSOLUTE(.); - *(.bss .bss.*) - *(.gnu.linkonce.b.*) - *(COMMON) - _ebss = ABSOLUTE(.); - } > sram - - /* Stabs debugging sections. */ - .stab 0 : { *(.stab) } - .stabstr 0 : { *(.stabstr) } - .stab.excl 0 : { *(.stab.excl) } - .stab.exclstr 0 : { *(.stab.exclstr) } - .stab.index 0 : { *(.stab.index) } - .stab.indexstr 0 : { *(.stab.indexstr) } - .comment 0 : { *(.comment) } - .debug_abbrev 0 : { *(.debug_abbrev) } - .debug_info 0 : { *(.debug_info) } - .debug_line 0 : { *(.debug_line) } - .debug_pubnames 0 : { *(.debug_pubnames) } - .debug_aranges 0 : { *(.debug_aranges) } -} diff --git a/configs/stm3210e-eval/nxconsole/Make.defs b/configs/stm3210e-eval/nxconsole/Make.defs index a2b4789d711..91aab08b4ba 100644 --- a/configs/stm3210e-eval/nxconsole/Make.defs +++ b/configs/stm3210e-eval/nxconsole/Make.defs @@ -84,13 +84,13 @@ ifeq ($(WINTOOL),y) MKDEP = $(TOPDIR)/tools/mknulldeps.sh ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}" - ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/nxconsole/$(LDSCRIPT)}" + ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}" else # Linux/Cygwin-native toolchain MKDEP = $(TOPDIR)/tools/mkdeps.sh ARCHINCLUDES = -I. -isystem $(TOPDIR)/include ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx - ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/nxconsole/$(LDSCRIPT) + ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT) endif CC = $(CROSSDEV)gcc diff --git a/configs/stm3210e-eval/nxlines/Make.defs b/configs/stm3210e-eval/nxlines/Make.defs index 46c7306937c..7976394f671 100644 --- a/configs/stm3210e-eval/nxlines/Make.defs +++ b/configs/stm3210e-eval/nxlines/Make.defs @@ -1,7 +1,7 @@ ############################################################################ # configs/stm3210e-eval/nxlines/Make.defs # -# Copyright (C) 2011 Gregory Nutt. All rights reserved. +# Copyright (C) 2011-2012 Gregory Nutt. All rights reserved. # Author: Gregory Nutt # # Redistribution and use in source and binary forms, with or without @@ -84,13 +84,13 @@ ifeq ($(WINTOOL),y) MKDEP = $(TOPDIR)/tools/mknulldeps.sh ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}" - ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/nxlines/$(LDSCRIPT)}" + ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}" else # Linux/Cygwin-native toolchain MKDEP = $(TOPDIR)/tools/mkdeps.sh ARCHINCLUDES = -I. -isystem $(TOPDIR)/include ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx - ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/nxlines/$(LDSCRIPT) + ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT) endif CC = $(CROSSDEV)gcc diff --git a/configs/stm3210e-eval/nxlines/ld.script b/configs/stm3210e-eval/nxlines/ld.script deleted file mode 100644 index dfa07af5327..00000000000 --- a/configs/stm3210e-eval/nxlines/ld.script +++ /dev/null @@ -1,112 +0,0 @@ -/**************************************************************************** - * configs/stm3210e-eval/nxlines/ld.script - * - * Copyright (C) 2011 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name NuttX nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************/ - -/* The STM32F103ZET6 has 512Kb of FLASH beginning at address 0x0800:0000 and - * 64Kb of SRAM beginning at address 0x2000:0000. When booting from FLASH, - * FLASH memory is aliased to address 0x0000:0000 where the code expects to - * begin execution by jumping to the entry point in the 0x0800:0000 address - * range. - */ - -MEMORY -{ - flash (rx) : ORIGIN = 0x08000000, LENGTH = 512K - sram (rwx) : ORIGIN = 0x20000000, LENGTH = 64K -} - -OUTPUT_ARCH(arm) -ENTRY(_stext) -SECTIONS -{ - .text : { - _stext = ABSOLUTE(.); - *(.vectors) - *(.text .text.*) - *(.fixup) - *(.gnu.warning) - *(.rodata .rodata.*) - *(.gnu.linkonce.t.*) - *(.glue_7) - *(.glue_7t) - *(.got) - *(.gcc_except_table) - *(.gnu.linkonce.r.*) - _etext = ABSOLUTE(.); - } > flash - - _eronly = ABSOLUTE(.); - - /* The STM32F103Z has 64Kb of SRAM beginning at the following address */ - - .data : { - _sdata = ABSOLUTE(.); - *(.data .data.*) - *(.gnu.linkonce.d.*) - CONSTRUCTORS - _edata = ABSOLUTE(.); - } > sram AT > flash - - .ARM.extab : { - *(.ARM.extab*) - } >sram - - __exidx_start = ABSOLUTE(.); - .ARM.exidx : { - *(.ARM.exidx*) - } >sram - __exidx_end = ABSOLUTE(.); - - .bss : { - _sbss = ABSOLUTE(.); - *(.bss .bss.*) - *(.gnu.linkonce.b.*) - *(COMMON) - _ebss = ABSOLUTE(.); - } > sram - - /* Stabs debugging sections. */ - .stab 0 : { *(.stab) } - .stabstr 0 : { *(.stabstr) } - .stab.excl 0 : { *(.stab.excl) } - .stab.exclstr 0 : { *(.stab.exclstr) } - .stab.index 0 : { *(.stab.index) } - .stab.indexstr 0 : { *(.stab.indexstr) } - .comment 0 : { *(.comment) } - .debug_abbrev 0 : { *(.debug_abbrev) } - .debug_info 0 : { *(.debug_info) } - .debug_line 0 : { *(.debug_line) } - .debug_pubnames 0 : { *(.debug_pubnames) } - .debug_aranges 0 : { *(.debug_aranges) } -} diff --git a/configs/stm3210e-eval/nxlines/ld.script.dfu b/configs/stm3210e-eval/nxlines/ld.script.dfu deleted file mode 100644 index f11068ef1a1..00000000000 --- a/configs/stm3210e-eval/nxlines/ld.script.dfu +++ /dev/null @@ -1,111 +0,0 @@ -/**************************************************************************** - * configs/stm3210e-eval/nxlines/ld.script.dfu - * - * Copyright (C) 2011 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name NuttX nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************/ - -/* The STM32F103ZET6 has 512Kb of FLASH beginning at address 0x0800:0000 and - * 64Kb of SRAM beginning at address 0x2000:0000. Here we assume that the - * STM3210E-EVAL's DFU bootloader is being used. In that case, the corrct - * load .text load address is 0x08003000 (leaving 464Kb). - */ - -MEMORY -{ - flash (rx) : ORIGIN = 0x08003000, LENGTH = 464K - sram (rwx) : ORIGIN = 0x20000000, LENGTH = 64K -} - -OUTPUT_ARCH(arm) -ENTRY(_stext) -SECTIONS -{ - .text : { - _stext = ABSOLUTE(.); - *(.vectors) - *(.text .text.*) - *(.fixup) - *(.gnu.warning) - *(.rodata .rodata.*) - *(.gnu.linkonce.t.*) - *(.glue_7) - *(.glue_7t) - *(.got) - *(.gcc_except_table) - *(.gnu.linkonce.r.*) - _etext = ABSOLUTE(.); - } > flash - - _eronly = ABSOLUTE(.); - - /* The STM32F103Z has 64Kb of SRAM beginning at the following address */ - - .data : { - _sdata = ABSOLUTE(.); - *(.data .data.*) - *(.gnu.linkonce.d.*) - CONSTRUCTORS - _edata = ABSOLUTE(.); - } > sram AT > flash - - .ARM.extab : { - *(.ARM.extab*) - } >sram - - __exidx_start = ABSOLUTE(.); - .ARM.exidx : { - *(.ARM.exidx*) - } >sram - __exidx_end = ABSOLUTE(.); - - .bss : { - _sbss = ABSOLUTE(.); - *(.bss .bss.*) - *(.gnu.linkonce.b.*) - *(COMMON) - _ebss = ABSOLUTE(.); - } > sram - - /* Stabs debugging sections. */ - .stab 0 : { *(.stab) } - .stabstr 0 : { *(.stabstr) } - .stab.excl 0 : { *(.stab.excl) } - .stab.exclstr 0 : { *(.stab.exclstr) } - .stab.index 0 : { *(.stab.index) } - .stab.indexstr 0 : { *(.stab.indexstr) } - .comment 0 : { *(.comment) } - .debug_abbrev 0 : { *(.debug_abbrev) } - .debug_info 0 : { *(.debug_info) } - .debug_line 0 : { *(.debug_line) } - .debug_pubnames 0 : { *(.debug_pubnames) } - .debug_aranges 0 : { *(.debug_aranges) } -} diff --git a/configs/stm3210e-eval/nxtext/Make.defs b/configs/stm3210e-eval/nxtext/Make.defs index 904d7f6f864..9bf88c0d89b 100644 --- a/configs/stm3210e-eval/nxtext/Make.defs +++ b/configs/stm3210e-eval/nxtext/Make.defs @@ -1,7 +1,7 @@ ############################################################################ # configs/stm3210e-eval/nxtext/Make.defs # -# Copyright (C) 2011 Gregory Nutt. All rights reserved. +# Copyright (C) 2011-2012 Gregory Nutt. All rights reserved. # Author: Gregory Nutt # # Redistribution and use in source and binary forms, with or without @@ -84,13 +84,13 @@ ifeq ($(WINTOOL),y) MKDEP = $(TOPDIR)/tools/mknulldeps.sh ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}" - ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/nxtext/$(LDSCRIPT)}" + ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}" else # Linux/Cygwin-native toolchain MKDEP = $(TOPDIR)/tools/mkdeps.sh ARCHINCLUDES = -I. -isystem $(TOPDIR)/include ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx - ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/nxtext/$(LDSCRIPT) + ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT) endif CC = $(CROSSDEV)gcc diff --git a/configs/stm3210e-eval/nxtext/ld.script b/configs/stm3210e-eval/nxtext/ld.script deleted file mode 100644 index 193f7e5c26a..00000000000 --- a/configs/stm3210e-eval/nxtext/ld.script +++ /dev/null @@ -1,112 +0,0 @@ -/**************************************************************************** - * configs/stm3210e-eval/nxtext/ld.script - * - * Copyright (C) 2011 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name NuttX nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************/ - -/* The STM32F103ZET6 has 512Kb of FLASH beginning at address 0x0800:0000 and - * 64Kb of SRAM beginning at address 0x2000:0000. When booting from FLASH, - * FLASH memory is aliased to address 0x0000:0000 where the code expects to - * begin execution by jumping to the entry point in the 0x0800:0000 address - * range. - */ - -MEMORY -{ - flash (rx) : ORIGIN = 0x08000000, LENGTH = 512K - sram (rwx) : ORIGIN = 0x20000000, LENGTH = 64K -} - -OUTPUT_ARCH(arm) -ENTRY(_stext) -SECTIONS -{ - .text : { - _stext = ABSOLUTE(.); - *(.vectors) - *(.text .text.*) - *(.fixup) - *(.gnu.warning) - *(.rodata .rodata.*) - *(.gnu.linkonce.t.*) - *(.glue_7) - *(.glue_7t) - *(.got) - *(.gcc_except_table) - *(.gnu.linkonce.r.*) - _etext = ABSOLUTE(.); - } > flash - - _eronly = ABSOLUTE(.); - - /* The STM32F103Z has 64Kb of SRAM beginning at the following address */ - - .data : { - _sdata = ABSOLUTE(.); - *(.data .data.*) - *(.gnu.linkonce.d.*) - CONSTRUCTORS - _edata = ABSOLUTE(.); - } > sram AT > flash - - .ARM.extab : { - *(.ARM.extab*) - } >sram - - __exidx_start = ABSOLUTE(.); - .ARM.exidx : { - *(.ARM.exidx*) - } >sram - __exidx_end = ABSOLUTE(.); - - .bss : { - _sbss = ABSOLUTE(.); - *(.bss .bss.*) - *(.gnu.linkonce.b.*) - *(COMMON) - _ebss = ABSOLUTE(.); - } > sram - - /* Stabs debugging sections. */ - .stab 0 : { *(.stab) } - .stabstr 0 : { *(.stabstr) } - .stab.excl 0 : { *(.stab.excl) } - .stab.exclstr 0 : { *(.stab.exclstr) } - .stab.index 0 : { *(.stab.index) } - .stab.indexstr 0 : { *(.stab.indexstr) } - .comment 0 : { *(.comment) } - .debug_abbrev 0 : { *(.debug_abbrev) } - .debug_info 0 : { *(.debug_info) } - .debug_line 0 : { *(.debug_line) } - .debug_pubnames 0 : { *(.debug_pubnames) } - .debug_aranges 0 : { *(.debug_aranges) } -} diff --git a/configs/stm3210e-eval/nxtext/ld.script.dfu b/configs/stm3210e-eval/nxtext/ld.script.dfu deleted file mode 100644 index 81e176b0275..00000000000 --- a/configs/stm3210e-eval/nxtext/ld.script.dfu +++ /dev/null @@ -1,111 +0,0 @@ -/**************************************************************************** - * configs/stm3210e-eval/nxtext/ld.script.dfu - * - * Copyright (C) 2011 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name NuttX nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************/ - -/* The STM32F103ZET6 has 512Kb of FLASH beginning at address 0x0800:0000 and - * 64Kb of SRAM beginning at address 0x2000:0000. Here we assume that the - * STM3210E-EVAL's DFU bootloader is being used. In that case, the corrct - * load .text load address is 0x08003000 (leaving 464Kb). - */ - -MEMORY -{ - flash (rx) : ORIGIN = 0x08003000, LENGTH = 464K - sram (rwx) : ORIGIN = 0x20000000, LENGTH = 64K -} - -OUTPUT_ARCH(arm) -ENTRY(_stext) -SECTIONS -{ - .text : { - _stext = ABSOLUTE(.); - *(.vectors) - *(.text .text.*) - *(.fixup) - *(.gnu.warning) - *(.rodata .rodata.*) - *(.gnu.linkonce.t.*) - *(.glue_7) - *(.glue_7t) - *(.got) - *(.gcc_except_table) - *(.gnu.linkonce.r.*) - _etext = ABSOLUTE(.); - } > flash - - _eronly = ABSOLUTE(.); - - /* The STM32F103Z has 64Kb of SRAM beginning at the following address */ - - .data : { - _sdata = ABSOLUTE(.); - *(.data .data.*) - *(.gnu.linkonce.d.*) - CONSTRUCTORS - _edata = ABSOLUTE(.); - } > sram AT > flash - - .ARM.extab : { - *(.ARM.extab*) - } >sram - - __exidx_start = ABSOLUTE(.); - .ARM.exidx : { - *(.ARM.exidx*) - } >sram - __exidx_end = ABSOLUTE(.); - - .bss : { - _sbss = ABSOLUTE(.); - *(.bss .bss.*) - *(.gnu.linkonce.b.*) - *(COMMON) - _ebss = ABSOLUTE(.); - } > sram - - /* Stabs debugging sections. */ - .stab 0 : { *(.stab) } - .stabstr 0 : { *(.stabstr) } - .stab.excl 0 : { *(.stab.excl) } - .stab.exclstr 0 : { *(.stab.exclstr) } - .stab.index 0 : { *(.stab.index) } - .stab.indexstr 0 : { *(.stab.indexstr) } - .comment 0 : { *(.comment) } - .debug_abbrev 0 : { *(.debug_abbrev) } - .debug_info 0 : { *(.debug_info) } - .debug_line 0 : { *(.debug_line) } - .debug_pubnames 0 : { *(.debug_pubnames) } - .debug_aranges 0 : { *(.debug_aranges) } -} diff --git a/configs/stm3210e-eval/ostest/Make.defs b/configs/stm3210e-eval/ostest/Make.defs index ddda17fb227..6e346b92f23 100644 --- a/configs/stm3210e-eval/ostest/Make.defs +++ b/configs/stm3210e-eval/ostest/Make.defs @@ -1,7 +1,7 @@ ############################################################################ # configs/stm3210e-eval/ostest/Make.defs # -# Copyright (C) 2009 Gregory Nutt. All rights reserved. +# Copyright (C) 2009, 2012 Gregory Nutt. All rights reserved. # Author: Gregory Nutt # # Redistribution and use in source and binary forms, with or without @@ -81,14 +81,14 @@ ifeq ($(WINTOOL),y) MKDEP = $(TOPDIR)/tools/mknulldeps.sh ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}" - ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/ostest/$(LDSCRIPT)}" + ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}" MAXOPTIMIZATION = -O2 else # Linux/Cygwin-native toolchain MKDEP = $(TOPDIR)/tools/mkdeps.sh ARCHINCLUDES = -I. -isystem $(TOPDIR)/include ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx - ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/ostest/$(LDSCRIPT) + ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT) endif CC = $(CROSSDEV)gcc diff --git a/configs/stm3210e-eval/ostest/ld.script b/configs/stm3210e-eval/ostest/ld.script deleted file mode 100755 index bc09f4594ea..00000000000 --- a/configs/stm3210e-eval/ostest/ld.script +++ /dev/null @@ -1,112 +0,0 @@ -/**************************************************************************** - * configs/stm3210e-eval/ostest/ld.script - * - * Copyright (C) 2009, 2011 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name NuttX nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************/ - -/* The STM32F103ZET6 has 512Kb of FLASH beginning at address 0x0800:0000 and - * 64Kb of SRAM beginning at address 0x2000:0000. When booting from FLASH, - * FLASH memory is aliased to address 0x0000:0000 where the code expects to - * begin execution by jumping to the entry point in the 0x0800:0000 address - * range. - */ - -MEMORY -{ - flash (rx) : ORIGIN = 0x08000000, LENGTH = 512K - sram (rwx) : ORIGIN = 0x20000000, LENGTH = 64K -} - -OUTPUT_ARCH(arm) -ENTRY(_stext) -SECTIONS -{ - .text : { - _stext = ABSOLUTE(.); - *(.vectors) - *(.text .text.*) - *(.fixup) - *(.gnu.warning) - *(.rodata .rodata.*) - *(.gnu.linkonce.t.*) - *(.glue_7) - *(.glue_7t) - *(.got) - *(.gcc_except_table) - *(.gnu.linkonce.r.*) - _etext = ABSOLUTE(.); - } > flash - - _eronly = ABSOLUTE(.); - - /* The STM32F103Z has 64Kb of SRAM beginning at the following address */ - - .data : { - _sdata = ABSOLUTE(.); - *(.data .data.*) - *(.gnu.linkonce.d.*) - CONSTRUCTORS - _edata = ABSOLUTE(.); - } > sram AT > flash - - .ARM.extab : { - *(.ARM.extab*) - } >sram - - __exidx_start = ABSOLUTE(.); - .ARM.exidx : { - *(.ARM.exidx*) - } >sram - __exidx_end = ABSOLUTE(.); - - .bss : { - _sbss = ABSOLUTE(.); - *(.bss .bss.*) - *(.gnu.linkonce.b.*) - *(COMMON) - _ebss = ABSOLUTE(.); - } > sram - - /* Stabs debugging sections. */ - .stab 0 : { *(.stab) } - .stabstr 0 : { *(.stabstr) } - .stab.excl 0 : { *(.stab.excl) } - .stab.exclstr 0 : { *(.stab.exclstr) } - .stab.index 0 : { *(.stab.index) } - .stab.indexstr 0 : { *(.stab.indexstr) } - .comment 0 : { *(.comment) } - .debug_abbrev 0 : { *(.debug_abbrev) } - .debug_info 0 : { *(.debug_info) } - .debug_line 0 : { *(.debug_line) } - .debug_pubnames 0 : { *(.debug_pubnames) } - .debug_aranges 0 : { *(.debug_aranges) } -} diff --git a/configs/stm3210e-eval/ostest/ld.script.dfu b/configs/stm3210e-eval/ostest/ld.script.dfu deleted file mode 100755 index a63ea5b1504..00000000000 --- a/configs/stm3210e-eval/ostest/ld.script.dfu +++ /dev/null @@ -1,111 +0,0 @@ -/**************************************************************************** - * configs/stm3210e-eval/ostest/ld.script.dfu - * - * Copyright (C) 2009, 2011 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name NuttX nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************/ - -/* The STM32F103ZET6 has 512Kb of FLASH beginning at address 0x0800:0000 and - * 64Kb of SRAM beginning at address 0x2000:0000. Here we assume that the - * STM3210E-EVAL's DFU bootloader is being used. In that case, the corrct - * load .text load address is 0x08003000 (leaving 464Kb). - */ - -MEMORY -{ - flash (rx) : ORIGIN = 0x08003000, LENGTH = 464K - sram (rwx) : ORIGIN = 0x20000000, LENGTH = 64K -} - -OUTPUT_ARCH(arm) -ENTRY(_stext) -SECTIONS -{ - .text : { - _stext = ABSOLUTE(.); - *(.vectors) - *(.text .text.*) - *(.fixup) - *(.gnu.warning) - *(.rodata .rodata.*) - *(.gnu.linkonce.t.*) - *(.glue_7) - *(.glue_7t) - *(.got) - *(.gcc_except_table) - *(.gnu.linkonce.r.*) - _etext = ABSOLUTE(.); - } > flash - - _eronly = ABSOLUTE(.); - - /* The STM32F103Z has 64Kb of SRAM beginning at the following address */ - - .data : { - _sdata = ABSOLUTE(.); - *(.data .data.*) - *(.gnu.linkonce.d.*) - CONSTRUCTORS - _edata = ABSOLUTE(.); - } > sram AT > flash - - .ARM.extab : { - *(.ARM.extab*) - } >sram - - __exidx_start = ABSOLUTE(.); - .ARM.exidx : { - *(.ARM.exidx*) - } >sram - __exidx_end = ABSOLUTE(.); - - .bss : { - _sbss = ABSOLUTE(.); - *(.bss .bss.*) - *(.gnu.linkonce.b.*) - *(COMMON) - _ebss = ABSOLUTE(.); - } > sram - - /* Stabs debugging sections. */ - .stab 0 : { *(.stab) } - .stabstr 0 : { *(.stabstr) } - .stab.excl 0 : { *(.stab.excl) } - .stab.exclstr 0 : { *(.stab.exclstr) } - .stab.index 0 : { *(.stab.index) } - .stab.indexstr 0 : { *(.stab.indexstr) } - .comment 0 : { *(.comment) } - .debug_abbrev 0 : { *(.debug_abbrev) } - .debug_info 0 : { *(.debug_info) } - .debug_line 0 : { *(.debug_line) } - .debug_pubnames 0 : { *(.debug_pubnames) } - .debug_aranges 0 : { *(.debug_aranges) } -} diff --git a/configs/stm3210e-eval/nxconsole/ld.script b/configs/stm3210e-eval/scripts/ld.script similarity index 96% rename from configs/stm3210e-eval/nxconsole/ld.script rename to configs/stm3210e-eval/scripts/ld.script index 6e326c699ff..5504f0f612a 100644 --- a/configs/stm3210e-eval/nxconsole/ld.script +++ b/configs/stm3210e-eval/scripts/ld.script @@ -1,7 +1,7 @@ /**************************************************************************** - * configs/stm3210e-eval/nxconsole/ld.script + * configs/stm3210e-eval/scripts/ld.script * - * Copyright (C) 2012 Gregory Nutt. All rights reserved. + * Copyright (C) 2009, 2011-2012 Gregory Nutt. All rights reserved. * Author: Gregory Nutt * * Redistribution and use in source and binary forms, with or without diff --git a/configs/stm3210e-eval/nxconsole/ld.script.dfu b/configs/stm3210e-eval/scripts/ld.script.dfu similarity index 96% rename from configs/stm3210e-eval/nxconsole/ld.script.dfu rename to configs/stm3210e-eval/scripts/ld.script.dfu index 7b9877ddf4a..8f879983a01 100644 --- a/configs/stm3210e-eval/nxconsole/ld.script.dfu +++ b/configs/stm3210e-eval/scripts/ld.script.dfu @@ -1,7 +1,7 @@ /**************************************************************************** - * configs/stm3210e-eval/nxconsole/ld.script.dfu + * configs/stm3210e-eval/scripts/ld.script.dfu * - * Copyright (C) 2012 Gregory Nutt. All rights reserved. + * Copyright (C) 2009, 2011-2012 Gregory Nutt. All rights reserved. * Author: Gregory Nutt * * Redistribution and use in source and binary forms, with or without diff --git a/configs/stm3210e-eval/src/Makefile b/configs/stm3210e-eval/src/Makefile index be12a216fc9..2179bd6a9ed 100644 --- a/configs/stm3210e-eval/src/Makefile +++ b/configs/stm3210e-eval/src/Makefile @@ -76,6 +76,18 @@ ifeq ($(CONFIG_WATCHDOG),y) CSRCS += up_watchdog.c endif +ifeq ($(CONFIG_PM_CUSTOMINIT),y) +CSRCS += up_pm.c +endif + +ifeq ($(CONFIG_PM),y) +CSRCS += up_pmbuttons.c +endif + +ifeq ($(CONFIG_IDLE_CUSTOM),y) +CSRCS += up_idle.c +endif + COBJS = $(CSRCS:.c=$(OBJEXT)) SRCS = $(ASRCS) $(CSRCS) diff --git a/configs/stm3210e-eval/src/up_idle.c b/configs/stm3210e-eval/src/up_idle.c new file mode 100644 index 00000000000..268a138036a --- /dev/null +++ b/configs/stm3210e-eval/src/up_idle.c @@ -0,0 +1,194 @@ +/**************************************************************************** + * configs/stm3210e-eval/src/up_idle.c + * arch/arm/src/board/up_idle.c + * + * Copyright (C) 2012 Gregory Nutt. All rights reserved. + * Authors: Gregory Nutt + * Diego Sanchez + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + * + ****************************************************************************/ + +/**************************************************************************** + * Included Files + ****************************************************************************/ + +#include +#include + +#include +#include + +#include +#include +#include + +#include "stm32_pm.h" +#include "stm32_rcc.h" +#include "up_internal.h" + +/**************************************************************************** + * Pre-processor Definitions + ****************************************************************************/ + +/* Does the board support an IDLE LED to indicate that the board is in the + * IDLE state? + */ + +#if defined(CONFIG_ARCH_LEDS) && defined(LED_IDLE) +# define BEGIN_IDLE() up_ledon(LED_IDLE) +# define END_IDLE() up_ledoff(LED_IDLE) +#else +# define BEGIN_IDLE() +# define END_IDLE() +#endif + +/**************************************************************************** + * Private Functions + ****************************************************************************/ + +/**************************************************************************** + * Name: up_idlepm + * + * Description: + * Perform IDLE state power management. + * + ****************************************************************************/ + +#ifdef CONFIG_PM +static void up_idlepm(void) +{ + static enum pm_state_e oldstate = PM_NORMAL; + enum pm_state_e newstate; + irqstate_t flags; + int ret; + + /* Decide, which power saving level can be obtained */ + + newstate = pm_checkstate(); + + /* Check for state changes */ + + if (newstate != oldstate) + { + lldbg("newstate= %d oldstate=%d\n", newstate, oldstate); + + flags = irqsave(); + + /* Force the global state change */ + + ret = pm_changestate(newstate); + if (ret < 0) + { + /* The new state change failed, revert to the preceding state */ + + (void)pm_changestate(oldstate); + } + else + { + /* Save the new state */ + + oldstate = newstate; + } + + /* Then perform board-specific, state-dependent logic here */ + + switch (newstate) + { + case PM_NORMAL: + break; + + case PM_IDLE: + break; + + case PM_STANDBY: + /* Configure all the buttons as wakeup EXTI */ + + up_pmbuttons(); + + /* Call the MCU stop mode */ + + stm32_pmstop(true); + break; + + case PM_SLEEP: + (void)stm32_pmstandby(); + break; + + default: + break; + } + + irqrestore(flags); + } +} +#else +# define up_idlepm() +#endif + +/**************************************************************************** + * Public Functions + ****************************************************************************/ + +/**************************************************************************** + * Name: up_idle + * + * Description: + * up_idle() is the logic that will be executed when their is no other + * ready-to-run task. This is processor idle time and will continue until + * some interrupt occurs to cause a context switch from the idle task. + * + * Processing in this state may be processor-specific. e.g., this is where + * power management operations might be performed. + * + ****************************************************************************/ + +void up_idle(void) +{ +#if defined(CONFIG_SUPPRESS_INTERRUPTS) || defined(CONFIG_SUPPRESS_TIMER_INTS) + /* If the system is idle and there are no timer interrupts, then process + * "fake" timer interrupts. Hopefully, something will wake up. + */ + + sched_process_timer(); +#else + + /* Perform IDLE mode power management */ + + up_idlepm(); + + /* Sleep until an interrupt occurs to save power */ + + BEGIN_IDLE(); + asm("WFI"); + END_IDLE(); +#endif +} + diff --git a/configs/stm3210e-eval/src/up_lcd.c b/configs/stm3210e-eval/src/up_lcd.c index d6e4a613ddc..e44699db6a7 100644 --- a/configs/stm3210e-eval/src/up_lcd.c +++ b/configs/stm3210e-eval/src/up_lcd.c @@ -1179,7 +1179,6 @@ static void stm3210e_pm_notify(struct pm_callback_s *cb , enum pm_state_e pmstat /* Entering IDLE mode - Turn display off */ #ifdef CONFIG_LCD_PWM - lldbg("power:%d \n", g_lcddev.power); putreg16(0, STM32_TIM1_CCR1); #endif } diff --git a/configs/stm3210e-eval/src/up_leds.c b/configs/stm3210e-eval/src/up_leds.c index 611a5c8496e..56ed766b249 100644 --- a/configs/stm3210e-eval/src/up_leds.c +++ b/configs/stm3210e-eval/src/up_leds.c @@ -2,8 +2,8 @@ * configs/stm3210e_eval/src/up_leds.c * arch/arm/src/board/up_leds.c * - * Copyright (C) 2009 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt + * Copyright (C) 2009-2012 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions @@ -45,6 +45,7 @@ #include #include +#include #include "chip.h" #include "up_arch.h" @@ -132,6 +133,23 @@ #define LED_PANIC_OFF_SETBITS ((0) << OFF_SETBITS_SHIFT) #define LED_PANIC_OFF_CLRBITS ((STM3210E_LED4) << OFF_CLRBITS_SHIFT) +/************************************************************************************** + * Private Function Protototypes + **************************************************************************************/ + +/* LED State Controls */ + +static inline void led_clrbits(unsigned int clrbits); +static inline void led_setbits(unsigned int setbits); +static void led_setonoff(unsigned int bits); + +/* LED Power Management */ + +#ifdef CONFIG_PM +static void led_pm_notify(struct pm_callback_s *cb, enum pm_state_e pmstate); +static int led_pm_prepare(struct pm_callback_s *cb, enum pm_state_e pmstate); +#endif + /**************************************************************************** * Private Data ****************************************************************************/ @@ -163,10 +181,26 @@ static const uint16_t g_ledbits[8] = LED_PANIC_OFF_SETBITS | LED_PANIC_OFF_CLRBITS) }; +#ifdef CONFIG_PM +static struct pm_callback_s g_ledscb = +{ + .notify = led_pm_notify, + .prepare = led_pm_prepare, +}; +#endif + /**************************************************************************** * Private Functions ****************************************************************************/ +/**************************************************************************** + * Name: led_clrbits + * + * Description: + * Clear all LEDs to the bit encoded state + * + ****************************************************************************/ + static inline void led_clrbits(unsigned int clrbits) { if ((clrbits & STM3210E_LED1) != 0) @@ -190,6 +224,14 @@ static inline void led_clrbits(unsigned int clrbits) } } +/**************************************************************************** + * Name: led_setbits + * + * Description: + * Set all LEDs to the bit encoded state + * + ****************************************************************************/ + static inline void led_setbits(unsigned int setbits) { if ((setbits & STM3210E_LED1) != 0) @@ -213,12 +255,95 @@ static inline void led_setbits(unsigned int setbits) } } +/**************************************************************************** + * Name: led_setonoff + * + * Description: + * Set/clear all LEDs to the bit encoded state + * + ****************************************************************************/ + static void led_setonoff(unsigned int bits) { led_clrbits(CLRBITS(bits)); led_setbits(SETBITS(bits)); } +/**************************************************************************** + * Name: led_pm_notify + * + * Description: + * Notify the driver of new power state. This callback is called after + * all drivers have had the opportunity to prepare for the new power state. + * + ****************************************************************************/ + +#ifdef CONFIG_PM +static void led_pm_notify(struct pm_callback_s *cb , enum pm_state_e pmstate) +{ + switch (pmstate) + { + case(PM_NORMAL): + { + /* Restore normal LEDs operation */ + + } + break; + + case(PM_IDLE): + { + /* Entering IDLE mode - Turn leds off */ + + } + break; + + case(PM_STANDBY): + { + /* Entering STANDBY mode - Logic for PM_STANDBY goes here */ + + } + break; + + case(PM_SLEEP): + { + /* Entering SLEEP mode - Logic for PM_SLEEP goes here */ + + } + break; + + default: + { + /* Should not get here */ + + } + break; + } +} +#endif + +/**************************************************************************** + * Name: led_pm_prepare + * + * Description: + * Request the driver to prepare for a new power state. This is a warning + * that the system is about to enter into a new power state. The driver + * should begin whatever operations that may be required to enter power + * state. The driver may abort the state change mode by returning a + * non-zero value from the callback function. + * + ****************************************************************************/ + +#ifdef CONFIG_PM +static int led_pm_prepare(struct pm_callback_s *cb , enum pm_state_e pmstate) +{ + /* No preparation to change power modes is required by the LEDs driver. + * We always accept the state change by returning OK. + */ + + return OK; +} +#endif + /**************************************************************************** * Public Functions ****************************************************************************/ @@ -244,6 +369,18 @@ void up_ledinit(void) void up_ledon(int led) { +#ifdef CONFIG_PM + if (led == LED_IRQSENABLED) + { + /* Register to receive power management callbacks */ + + int ret = pm_register(&g_ledscb); + if (ret != OK) + { + up_ledon(LED_ASSERTION); + } + } +#endif led_setonoff(ON_BITS(g_ledbits[led])); } diff --git a/configs/stm3210e-eval/src/up_pm.c b/configs/stm3210e-eval/src/up_pm.c new file mode 100644 index 00000000000..8fa8b283d40 --- /dev/null +++ b/configs/stm3210e-eval/src/up_pm.c @@ -0,0 +1,96 @@ +/**************************************************************************** + * configs/stm3210e-eval/src/up_pm.c + * arch/arm/src/board/up_pm.c + * + * Copyright (C) 2012 Gregory Nutt. All rights reserved. + * Authors: Gregory Nutt + * Diego Sanchez + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/**************************************************************************** + * Included Files + ****************************************************************************/ + +#include + +#include + +#include "up_internal.h" +#include "stm32_pm.h" + +#ifdef CONFIG_PM + +/**************************************************************************** + * Pre-processor Definitions + ****************************************************************************/ + +/**************************************************************************** + * Private Data + ****************************************************************************/ + +/**************************************************************************** + * Public Data + ****************************************************************************/ + +/**************************************************************************** + * Private Functions + ****************************************************************************/ + +/**************************************************************************** + * Public Functions + ****************************************************************************/ + +/**************************************************************************** + * Name: up_pminitialize + * + * Description: + * This function is called by MCU-specific logic at power-on reset in + * order to provide one-time initialization the power management subystem. + * This function must be called *very* early in the intialization sequence + * *before* any other device drivers are initialized (since they may + * attempt to register with the power management subsystem). + * + * Input parameters: + * None. + * + * Returned value: + * None. + * + ****************************************************************************/ + +void up_pminitialize(void) +{ + /* Then initialize the NuttX power management subsystem proper */ + + pm_initialize(); +} + +#endif /* CONFIG_PM */ diff --git a/configs/stm3210e-eval/src/up_pmbuttons.c b/configs/stm3210e-eval/src/up_pmbuttons.c new file mode 100644 index 00000000000..f7a001e9b05 --- /dev/null +++ b/configs/stm3210e-eval/src/up_pmbuttons.c @@ -0,0 +1,366 @@ +/**************************************************************************** + * configs/stm3210e-eval/src/up_pmbuttons.c + * arch/arm/src/board/up_pmbuttons.c + * + * Copyright (C) 2012 Gregory Nutt. All rights reserved. + * Authors: Gregory Nutt + * Diego Sanchez + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/**************************************************************************** + * Included Files + ****************************************************************************/ + +#include +#include + +#include +#include +#include +#include + +#include "up_arch.h" +#include "nvic.h" +#include "stm32_pwr.h" +#include "stm32_pm.h" + +#if defined(CONFIG_PM) && defined(CONFIG_IDLE_CUSTOM) + +/**************************************************************************** + * Pre-processor Definitions + ****************************************************************************/ + +/* Configuration ************************************************************/ + +#ifndef CONFIG_ARCH_BUTTONS +# error "CONFIG_ARCH_BUTTONS is not defined in the configuration" +#endif + +#ifndef CONFIG_PM_BUTTONS_NAME0 +# define CONFIG_PM_BUTTONS_NAME0 "BUTTON0" +#endif +#ifndef CONFIG_PM_BUTTONS_NAME1 +# define CONFIG_PM_BUTTONS_NAME1 "BUTTON1" +#endif +#ifndef CONFIG_PM_BUTTONS_NAME2 +# define CONFIG_PM_BUTTONS_NAME2 "BUTTON2" +#endif +#ifndef CONFIG_PM_BUTTONS_NAME3 +# define CONFIG_PM_BUTTONS_NAME3 "BUTTON3" +#endif +#ifndef CONFIG_PM_BUTTONS_NAME4 +# define CONFIG_PM_BUTTONS_NAME4 "BUTTON4" +#endif +#ifndef CONFIG_PM_BUTTONS_NAME5 +# define CONFIG_PM_BUTTONS_NAME5 "BUTTON5" +#endif +#ifndef CONFIG_PM_BUTTONS_NAME6 +# define CONFIG_PM_BUTTONS_NAME6 "BUTTON6" +#endif +#ifndef CONFIG_PM_BUTTONS_NAME7 +# define CONFIG_PM_BUTTONS_NAME7 "BUTTON7" +#endif + +#define BUTTON_MIN 0 +#define BUTTON_MAX 7 + +#ifndef CONFIG_PM_BUTTONS_MIN +# define CONFIG_PM_BUTTONS_MIN BUTTON_MIN +#endif +#ifndef CONFIG_PM_BUTTONS_MAX +# define CONFIG_PM_BUTTONS_MAX BUTTON_MAX +#endif + +#if CONFIG_PM_BUTTONS_MIN > CONFIG_PM_BUTTONS_MAX +# error "CONFIG_PM_BUTTONS_MIN > CONFIG_PM_BUTTONS_MAX" +#endif +#if CONFIG_PM_BUTTONS_MAX > 7 +# error "CONFIG_PM_BUTTONS_MAX > 7" +#endif + +#ifndef CONFIG_PM_IRQBUTTONS_MIN +# define CONFIG_PM_IRQBUTTONS_MIN CONFIG_PM_BUTTONS_MIN +#endif +#ifndef CONFIG_PM_IRQBUTTONS_MAX +# define CONFIG_PM_IRQBUTTONS_MAX CONFIG_PM_BUTTONS_MAX +#endif + +#if CONFIG_PM_IRQBUTTONS_MIN > CONFIG_PM_IRQBUTTONS_MAX +# error "CONFIG_PM_IRQBUTTONS_MIN > CONFIG_PM_IRQBUTTONS_MAX" +#endif +#if CONFIG_PM_IRQBUTTONS_MAX > 7 +# error "CONFIG_PM_IRQBUTTONS_MAX > 7" +#endif + +#ifndef MIN +# define MIN(a,b) (a < b ? a : b) +#endif +#ifndef MAX +# define MAX(a,b) (a > b ? a : b) +#endif + +#define MIN_BUTTON MIN(CONFIG_PM_BUTTONS_MIN, CONFIG_PM_IRQBUTTONS_MIN) +#define MAX_BUTTON MAX(CONFIG_PM_BUTTONS_MAX, CONFIG_PM_IRQBUTTONS_MAX) + +#define NUM_PMBUTTONS (MAX_BUTTON - MIN_BUTTON + 1) +#define BUTTON_INDEX(b) ((b)-MIN_BUTTON) + +/**************************************************************************** + * Private Types + ****************************************************************************/ + +struct button_info_s +{ + FAR const char *name; /* Name for the button */ +#ifdef CONFIG_ARCH_IRQBUTTONS + xcpt_t handler; /* Button interrupt handler */ +#endif +}; + +/**************************************************************************** + * Private Function Prototypes + ****************************************************************************/ + +#ifdef CONFIG_ARCH_IRQBUTTONS +static void button_handler(int id, int irq); + +#if MIN_BUTTON < 1 +static int button0_handler(int irq, FAR void *context); +#endif +#if MIN_BUTTON < 2 && MAX_BUTTON > 0 +static int button1_handler(int irq, FAR void *context); +#endif +#if MIN_BUTTON < 3 && MAX_BUTTON > 1 +static int button2_handler(int irq, FAR void *context); +#endif +#if MIN_BUTTON < 4 && MAX_BUTTON > 2 +static int button3_handler(int irq, FAR void *context); +#endif +#if MIN_BUTTON < 5 && MAX_BUTTON > 3 +static int button4_handler(int irq, FAR void *context); +#endif +#if MIN_BUTTON < 6 && MAX_BUTTON > 4 +static int button5_handler(int irq, FAR void *context); +#endif +#if MIN_BUTTON < 7 && MAX_BUTTON > 5 +static int button6_handler(int irq, FAR void *context); +#endif +#if MAX_BUTTON > 6 +static int button7_handler(int irq, FAR void *context); +#endif +#endif /* CONFIG_ARCH_IRQBUTTONS */ + +/**************************************************************************** + * Private Data + ****************************************************************************/ + + /* Button Names */ + +static const struct button_info_s g_buttoninfo[NUM_PMBUTTONS] = +{ +#if MIN_BUTTON < 1 + { + CONFIG_PM_BUTTONS_NAME0, +#ifdef CONFIG_ARCH_IRQBUTTONS + button0_handler +#endif + }, +#endif +#if MIN_BUTTON < 2 && MAX_BUTTON > 0 + { + CONFIG_PM_BUTTONS_NAME1, +#ifdef CONFIG_ARCH_IRQBUTTONS + button1_handler +#endif + }, +#endif +#if MIN_BUTTON < 3 && MAX_BUTTON > 1 + { + CONFIG_PM_BUTTONS_NAME2, +#ifdef CONFIG_ARCH_IRQBUTTONS + button2_handler +#endif + }, +#endif +#if MIN_BUTTON < 4 && MAX_BUTTON > 2 + { + CONFIG_PM_BUTTONS_NAME3, +#ifdef CONFIG_ARCH_IRQBUTTONS + button3_handler +#endif + }, +#endif +#if MIN_BUTTON < 5 && MAX_BUTTON > 3 + { + CONFIG_PM_BUTTONS_NAME4, +#ifdef CONFIG_ARCH_IRQBUTTONS + button4_handler +#endif + }, +#endif +#if MIN_BUTTON < 6 && MAX_BUTTON > 4 + { + CONFIG_PM_BUTTONS_NAME5, +#ifdef CONFIG_ARCH_IRQBUTTONS + button5_handler +#endif + }, +#endif +#if MIN_BUTTON < 7 && MAX_BUTTON > 5 + { + CONFIG_PM_BUTTONS_NAME6, +#ifdef CONFIG_ARCH_IRQBUTTONS + button6_handler +#endif + }, +#endif +#if MAX_BUTTON > 6 + { + CONFIG_PM_BUTTONS_NAME7, +#ifdef CONFIG_ARCH_IRQBUTTONS + button7_handler +#endif + } +#endif +}; + +/**************************************************************************** + * Private Functions + ****************************************************************************/ + +#ifdef CONFIG_ARCH_IRQBUTTONS +static void button_handler(int id, int irq) +{ + /* For the moment force to the normal state */ + (void)pm_changestate(PM_NORMAL); +} + +#if MIN_BUTTON < 1 +static int button0_handler(int irq, FAR void *context) +{ + button_handler(0, irq); + return OK; +} +#endif + +#if MIN_BUTTON < 2 && MAX_BUTTON > 0 +static int button1_handler(int irq, FAR void *context) +{ + button_handler(1, irq); + return OK; +} +#endif + +#if MIN_BUTTON < 3 && MAX_BUTTON > 1 +static int button2_handler(int irq, FAR void *context) +{ + button_handler(2, irq); + return OK; +} +#endif + +#if MIN_BUTTON < 4 && MAX_BUTTON > 2 +static int button3_handler(int irq, FAR void *context) +{ + button_handler(3, irq); + return OK; +} +#endif + +#if MIN_BUTTON < 5 && MAX_BUTTON > 3 +static int button4_handler(int irq, FAR void *context) +{ + button_handler(4, irq); + return OK; +} +#endif + +#if MIN_BUTTON < 6 && MAX_BUTTON > 4 +static int button5_handler(int irq, FAR void *context) +{ + button_handler(5, irq); + return OK; +} +#endif + +#if MIN_BUTTON < 7 && MAX_BUTTON > 5 +static int button6_handler(int irq, FAR void *context) +{ + button_handler(6, irq); + return OK; +} +#endif + +#if MAX_BUTTON > 6 +static int button7_handler(int irq, FAR void *context) +{ + button_handler(7, irq); + return OK; +} +#endif +#endif /* CONFIG_ARCH_IRQBUTTONS */ + +/**************************************************************************** + * Public Functions + ****************************************************************************/ + +/**************************************************************************** + * Name: up_pmbuttons + * + * Description: + * Configure all the buttons of the STM3210e-eval board as EXTI, + * so any button is able to wakeup the MCU from the PM_STANDBY mode + * + ****************************************************************************/ + +void up_pmbuttons(void) +{ + /* Initialize the button GPIOs */ + + up_buttoninit(); + +#ifdef CONFIG_ARCH_IRQBUTTONS + int i; + for (i = CONFIG_PM_IRQBUTTONS_MIN; i <= CONFIG_PM_IRQBUTTONS_MAX; i++) + { + xcpt_t oldhandler = up_irqbutton(i, g_buttoninfo[BUTTON_INDEX(i)].handler); + + if (oldhandler != NULL) + { + lib_lowprintf("WARNING: oldhandler:%p is not NULL! " + "Button events may be lost or aliased!\n", + oldhandler); + } + } +#endif +} + +#endif /* defined(CONFIG_PM) && defined(CONFIG_IDLE_CUSTOM) */ diff --git a/configs/stm3210e-eval/usbserial/Make.defs b/configs/stm3210e-eval/usbserial/Make.defs index 8def16ce954..d7f8f538c1b 100644 --- a/configs/stm3210e-eval/usbserial/Make.defs +++ b/configs/stm3210e-eval/usbserial/Make.defs @@ -1,7 +1,7 @@ ############################################################################ # configs/stm3210e-eval/usbserial/Make.defs # -# Copyright (C) 2009 Gregory Nutt. All rights reserved. +# Copyright (C) 2009, 2012 Gregory Nutt. All rights reserved. # Author: Gregory Nutt # # Redistribution and use in source and binary forms, with or without @@ -81,14 +81,14 @@ ifeq ($(WINTOOL),y) MKDEP = $(TOPDIR)/tools/mknulldeps.sh ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}" - ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/usbserial/$(LDSCRIPT)}" + ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}" MAXOPTIMIZATION = -O2 else # Linux/Cygwin-native toolchain MKDEP = $(TOPDIR)/tools/mkdeps.sh ARCHINCLUDES = -I. -isystem $(TOPDIR)/include ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx - ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/usbserial/$(LDSCRIPT) + ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT) endif CC = $(CROSSDEV)gcc diff --git a/configs/stm3210e-eval/usbserial/ld.script b/configs/stm3210e-eval/usbserial/ld.script deleted file mode 100755 index 22a40d93ea8..00000000000 --- a/configs/stm3210e-eval/usbserial/ld.script +++ /dev/null @@ -1,112 +0,0 @@ -/**************************************************************************** - * configs/stm3210e-eval/usbserial/ld.script - * - * Copyright (C) 2009, 2011 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name NuttX nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************/ - -/* The STM32F103ZET6 has 512Kb of FLASH beginning at address 0x0800:0000 and - * 64Kb of SRAM beginning at address 0x2000:0000. When booting from FLASH, - * FLASH memory is aliased to address 0x0000:0000 where the code expects to - * begin execution by jumping to the entry point in the 0x0800:0000 address - * range. - */ - -MEMORY -{ - flash (rx) : ORIGIN = 0x08000000, LENGTH = 512K - sram (rwx) : ORIGIN = 0x20000000, LENGTH = 64K -} - -OUTPUT_ARCH(arm) -ENTRY(_stext) -SECTIONS -{ - .text : { - _stext = ABSOLUTE(.); - *(.vectors) - *(.text .text.*) - *(.fixup) - *(.gnu.warning) - *(.rodata .rodata.*) - *(.gnu.linkonce.t.*) - *(.glue_7) - *(.glue_7t) - *(.got) - *(.gcc_except_table) - *(.gnu.linkonce.r.*) - _etext = ABSOLUTE(.); - } > flash - - _eronly = ABSOLUTE(.); - - /* The STM32F103Z has 64Kb of SRAM beginning at the following address */ - - .data : { - _sdata = ABSOLUTE(.); - *(.data .data.*) - *(.gnu.linkonce.d.*) - CONSTRUCTORS - _edata = ABSOLUTE(.); - } > sram AT > flash - - .ARM.extab : { - *(.ARM.extab*) - } >sram - - __exidx_start = ABSOLUTE(.); - .ARM.exidx : { - *(.ARM.exidx*) - } >sram - __exidx_end = ABSOLUTE(.); - - .bss : { - _sbss = ABSOLUTE(.); - *(.bss .bss.*) - *(.gnu.linkonce.b.*) - *(COMMON) - _ebss = ABSOLUTE(.); - } > sram - - /* Stabs debugging sections. */ - .stab 0 : { *(.stab) } - .stabstr 0 : { *(.stabstr) } - .stab.excl 0 : { *(.stab.excl) } - .stab.exclstr 0 : { *(.stab.exclstr) } - .stab.index 0 : { *(.stab.index) } - .stab.indexstr 0 : { *(.stab.indexstr) } - .comment 0 : { *(.comment) } - .debug_abbrev 0 : { *(.debug_abbrev) } - .debug_info 0 : { *(.debug_info) } - .debug_line 0 : { *(.debug_line) } - .debug_pubnames 0 : { *(.debug_pubnames) } - .debug_aranges 0 : { *(.debug_aranges) } -} diff --git a/configs/stm3210e-eval/usbserial/ld.script.dfu b/configs/stm3210e-eval/usbserial/ld.script.dfu deleted file mode 100755 index 71218d5b585..00000000000 --- a/configs/stm3210e-eval/usbserial/ld.script.dfu +++ /dev/null @@ -1,111 +0,0 @@ -/**************************************************************************** - * configs/stm3210e-eval/usbserial/ld.script.dfu - * - * Copyright (C) 2009, 2011 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name NuttX nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************/ - -/* The STM32F103ZET6 has 512Kb of FLASH beginning at address 0x0800:0000 and - * 64Kb of SRAM beginning at address 0x2000:0000. Here we assume that the - * STM3210E-EVAL's DFU bootloader is being used. In that case, the corrct - * load .text load address is 0x08003000 (leaving 464Kb). - */ - -MEMORY -{ - flash (rx) : ORIGIN = 0x08003000, LENGTH = 464K - sram (rwx) : ORIGIN = 0x20000000, LENGTH = 64K -} - -OUTPUT_ARCH(arm) -ENTRY(_stext) -SECTIONS -{ - .text : { - _stext = ABSOLUTE(.); - *(.vectors) - *(.text .text.*) - *(.fixup) - *(.gnu.warning) - *(.rodata .rodata.*) - *(.gnu.linkonce.t.*) - *(.glue_7) - *(.glue_7t) - *(.got) - *(.gcc_except_table) - *(.gnu.linkonce.r.*) - _etext = ABSOLUTE(.); - } > flash - - _eronly = ABSOLUTE(.); - - /* The STM32F103Z has 64Kb of SRAM beginning at the following address */ - - .data : { - _sdata = ABSOLUTE(.); - *(.data .data.*) - *(.gnu.linkonce.d.*) - CONSTRUCTORS - _edata = ABSOLUTE(.); - } > sram AT > flash - - .ARM.extab : { - *(.ARM.extab*) - } >sram - - __exidx_start = ABSOLUTE(.); - .ARM.exidx : { - *(.ARM.exidx*) - } >sram - __exidx_end = ABSOLUTE(.); - - .bss : { - _sbss = ABSOLUTE(.); - *(.bss .bss.*) - *(.gnu.linkonce.b.*) - *(COMMON) - _ebss = ABSOLUTE(.); - } > sram - - /* Stabs debugging sections. */ - .stab 0 : { *(.stab) } - .stabstr 0 : { *(.stabstr) } - .stab.excl 0 : { *(.stab.excl) } - .stab.exclstr 0 : { *(.stab.exclstr) } - .stab.index 0 : { *(.stab.index) } - .stab.indexstr 0 : { *(.stab.indexstr) } - .comment 0 : { *(.comment) } - .debug_abbrev 0 : { *(.debug_abbrev) } - .debug_info 0 : { *(.debug_info) } - .debug_line 0 : { *(.debug_line) } - .debug_pubnames 0 : { *(.debug_pubnames) } - .debug_aranges 0 : { *(.debug_aranges) } -} diff --git a/configs/stm3210e-eval/usbstorage/Make.defs b/configs/stm3210e-eval/usbstorage/Make.defs index f5d055c4d74..da26d309da2 100755 --- a/configs/stm3210e-eval/usbstorage/Make.defs +++ b/configs/stm3210e-eval/usbstorage/Make.defs @@ -1,7 +1,7 @@ ############################################################################ # configs/stm3210e-eval/usbstorage/Make.defs # -# Copyright (C) 2009 Gregory Nutt. All rights reserved. +# Copyright (C) 2009, 2012 Gregory Nutt. All rights reserved. # Author: Gregory Nutt # # Redistribution and use in source and binary forms, with or without @@ -81,14 +81,14 @@ ifeq ($(WINTOOL),y) MKDEP = $(TOPDIR)/tools/mknulldeps.sh ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}" - ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/usbstorage/$(LDSCRIPT)}" + ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}" MAXOPTIMIZATION = -O2 else # Linux/Cygwin-native toolchain MKDEP = $(TOPDIR)/tools/mkdeps.sh ARCHINCLUDES = -I. -isystem $(TOPDIR)/include ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx - ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/usbstorage/$(LDSCRIPT) + ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT) endif CC = $(CROSSDEV)gcc diff --git a/configs/stm3210e-eval/usbstorage/ld.script b/configs/stm3210e-eval/usbstorage/ld.script deleted file mode 100755 index d4e03d3a52a..00000000000 --- a/configs/stm3210e-eval/usbstorage/ld.script +++ /dev/null @@ -1,112 +0,0 @@ -/**************************************************************************** - * configs/stm3210e-eval/usbstorage/ld.script - * - * Copyright (C) 2009, 2011 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name NuttX nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************/ - -/* The STM32F103ZET6 has 512Kb of FLASH beginning at address 0x0800:0000 and - * 64Kb of SRAM beginning at address 0x2000:0000. When booting from FLASH, - * FLASH memory is aliased to address 0x0000:0000 where the code expects to - * begin execution by jumping to the entry point in the 0x0800:0000 address - * range. - */ - -MEMORY -{ - flash (rx) : ORIGIN = 0x08000000, LENGTH = 512K - sram (rwx) : ORIGIN = 0x20000000, LENGTH = 64K -} - -OUTPUT_ARCH(arm) -ENTRY(_stext) -SECTIONS -{ - .text : { - _stext = ABSOLUTE(.); - *(.vectors) - *(.text .text.*) - *(.fixup) - *(.gnu.warning) - *(.rodata .rodata.*) - *(.gnu.linkonce.t.*) - *(.glue_7) - *(.glue_7t) - *(.got) - *(.gcc_except_table) - *(.gnu.linkonce.r.*) - _etext = ABSOLUTE(.); - } > flash - - _eronly = ABSOLUTE(.); - - /* The STM32F103Z has 64Kb of SRAM beginning at the following address */ - - .data : { - _sdata = ABSOLUTE(.); - *(.data .data.*) - *(.gnu.linkonce.d.*) - CONSTRUCTORS - _edata = ABSOLUTE(.); - } > sram AT > flash - - .ARM.extab : { - *(.ARM.extab*) - } >sram - - __exidx_start = ABSOLUTE(.); - .ARM.exidx : { - *(.ARM.exidx*) - } >sram - __exidx_end = ABSOLUTE(.); - - .bss : { - _sbss = ABSOLUTE(.); - *(.bss .bss.*) - *(.gnu.linkonce.b.*) - *(COMMON) - _ebss = ABSOLUTE(.); - } > sram - - /* Stabs debugging sections. */ - .stab 0 : { *(.stab) } - .stabstr 0 : { *(.stabstr) } - .stab.excl 0 : { *(.stab.excl) } - .stab.exclstr 0 : { *(.stab.exclstr) } - .stab.index 0 : { *(.stab.index) } - .stab.indexstr 0 : { *(.stab.indexstr) } - .comment 0 : { *(.comment) } - .debug_abbrev 0 : { *(.debug_abbrev) } - .debug_info 0 : { *(.debug_info) } - .debug_line 0 : { *(.debug_line) } - .debug_pubnames 0 : { *(.debug_pubnames) } - .debug_aranges 0 : { *(.debug_aranges) } -} diff --git a/configs/stm3210e-eval/usbstorage/ld.script.dfu b/configs/stm3210e-eval/usbstorage/ld.script.dfu deleted file mode 100755 index f58cd329dc5..00000000000 --- a/configs/stm3210e-eval/usbstorage/ld.script.dfu +++ /dev/null @@ -1,111 +0,0 @@ -/**************************************************************************** - * configs/stm3210e-eval/usbstorage/ld.script.dfu - * - * Copyright (C) 2009, 2011 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name NuttX nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************/ - -/* The STM32F103ZET6 has 512Kb of FLASH beginning at address 0x0800:0000 and - * 64Kb of SRAM beginning at address 0x2000:0000. Here we assume that the - * STM3210E-EVAL's DFU bootloader is being used. In that case, the corrct - * load .text load address is 0x08003000 (leaving 464Kb). - */ - -MEMORY -{ - flash (rx) : ORIGIN = 0x08003000, LENGTH = 464K - sram (rwx) : ORIGIN = 0x20000000, LENGTH = 64K -} - -OUTPUT_ARCH(arm) -ENTRY(_stext) -SECTIONS -{ - .text : { - _stext = ABSOLUTE(.); - *(.vectors) - *(.text .text.*) - *(.fixup) - *(.gnu.warning) - *(.rodata .rodata.*) - *(.gnu.linkonce.t.*) - *(.glue_7) - *(.glue_7t) - *(.got) - *(.gcc_except_table) - *(.gnu.linkonce.r.*) - _etext = ABSOLUTE(.); - } > flash - - _eronly = ABSOLUTE(.); - - /* The STM32F103Z has 64Kb of SRAM beginning at the following address */ - - .data : { - _sdata = ABSOLUTE(.); - *(.data .data.*) - *(.gnu.linkonce.d.*) - CONSTRUCTORS - _edata = ABSOLUTE(.); - } > sram AT > flash - - .ARM.extab : { - *(.ARM.extab*) - } >sram - - __exidx_start = ABSOLUTE(.); - .ARM.exidx : { - *(.ARM.exidx*) - } >sram - __exidx_end = ABSOLUTE(.); - - .bss : { - _sbss = ABSOLUTE(.); - *(.bss .bss.*) - *(.gnu.linkonce.b.*) - *(COMMON) - _ebss = ABSOLUTE(.); - } > sram - - /* Stabs debugging sections. */ - .stab 0 : { *(.stab) } - .stabstr 0 : { *(.stabstr) } - .stab.excl 0 : { *(.stab.excl) } - .stab.exclstr 0 : { *(.stab.exclstr) } - .stab.index 0 : { *(.stab.index) } - .stab.indexstr 0 : { *(.stab.indexstr) } - .comment 0 : { *(.comment) } - .debug_abbrev 0 : { *(.debug_abbrev) } - .debug_info 0 : { *(.debug_info) } - .debug_line 0 : { *(.debug_line) } - .debug_pubnames 0 : { *(.debug_pubnames) } - .debug_aranges 0 : { *(.debug_aranges) } -}