Update to README files

git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4222 42af7a65-404d-4744-a932-0658087f49c3
2026-09-27 18:58:27 +08:00 · 2011-12-24 13:46:06 +00:00
parent 452dffec5e
commit d014c75f61
5 changed files with 173 additions and 8 deletions
@@ -0,0 +1,135 @@
+Contents
+========
+
+This is the README.txt file for the drivers/lcd/ directory.
+
+  - LCD Header files
+    include/nuttx/lcd/lcd.h
+    struct lcd_dev_s
+  - Binding LCD Drivers
+  - Examples: /drivers/lcd/
+  - Examples: configs/
+  - graphics/
+
+LCD Header files
+================
+
+  include/nuttx/lcd/lcd.h
+
+      Structures and APIs needed to work with LCD drivers are provided in
+      this header file.  This header file also depends on some of the same
+      definitions used for the frame buffer driver as privided in
+      include/nuttx/fb.h.
+
+  struct lcd_dev_s
+
+      Each LCD device driver must implement an instance of struct lcd_dev_s.
+      That structure defines a call table with the following methods:
+
+      - Get information about the LCD video controller configuration and the
+        configuration of each LCD color plane.
+
+        int (*getvideoinfo)(FAR struct lcd_dev_s *dev,
+                            FAR struct fb_videoinfo_s *vinfo);
+        int (*getplaneinfo)(FAR struct lcd_dev_s *dev, unsigned int planeno,
+                           FAR struct lcd_planeinfo_s *pinfo);
+
+      - The following are provided only if the video hardware supports RGB
+        color mapping:
+
+        int (*getcmap)(FAR struct lcd_dev_s *dev,
+                       FAR struct fb_cmap_s *cmap);
+        int (*putcmap)(FAR struct lcd_dev_s *dev,
+                       FAR const struct fb_cmap_s *cmap);
+
+      - The following are provided only if the video hardware supports a
+        hardware cursor:
+
+        int (*getcursor)(FAR struct lcd_dev_s *dev,
+                         FAR struct fb_cursorattrib_s *attrib);
+        int (*setcursor)(FAR struct lcd_dev_s *dev,
+                         FAR struct fb_setcursor_s *settings);
+
+      - Get the LCD panel power status (0: full off - CONFIG_LCD_MAXPOWER:
+        full on). On backlit LCDs, this setting may correspond to the
+        backlight setting.
+
+        int (*getpower)(struct lcd_dev_s *dev);
+
+      - Enable/disable LCD panel power (0: full off - CONFIG_LCD_MAXPOWER:
+        full on). On backlit LCDs, this setting may correspond to the
+        backlight setting.
+
+        int (*setpower)(struct lcd_dev_s *dev, int power);
+
+      - Get the current contrast setting (0-CONFIG_LCD_MAXCONTRAST) */
+
+        int (*getcontrast)(struct lcd_dev_s *dev);
+
+     - Set LCD panel contrast (0-CONFIG_LCD_MAXCONTRAST)
+
+        int (*setcontrast)(struct lcd_dev_s *dev, unsigned int contrast);
+
+Binding LCD Drivers
+===================
+
+  LCD drivers are not normally directly accessed by user code, but are
+  usually bound to another,  higher level device driver. In general, the
+  binding sequence is:
+
+  1. Get an instance of struct lcd_dev_s from the hardware-specific LCD
+     device driver, and 
+  2. Provide that instance to the initialization method of the higher
+    level device driver.
+
+Examples: /drivers/lcd/
+=======================
+
+Re-usable LCD drivers reside in the drivers/lcd directory:
+
+  nokia6100.c.  Supports the Nokia 6100 display with either the Philips
+    PCF883 or the Epson S1D15G10 display controller.  This LCD is used
+    with the Olimex LPC1766-STK (but has not been fully integrated).
+  
+  p14201.c.  Driver for RiT P14201 series display with SD1329 IC
+    controller.  This OLED is used with older versions of the
+    TI/Luminary LM3S8962 Evaluation Kit.
+  
+  ug-9664hswag01.c.  OLED Display Module, UG-9664HSWAG01", Univision
+    Technology Inc.  Used with the LPC Xpresso and Embedded Artists
+    base board.
+
+Examples: configs/
+==================
+
+There are additional LCD drivers in the configs/<board>/src directory
+that support additional LCDs.  LCD drivers in the configuration directory
+if they support some differ LCD interface (such as a parallel interface)
+that makes then less re-usable:
+
+configs/sam3u-ek/src/up_lcd.c.
+
+  configs/hymini-stm32v/src/ssd1289.c.
+  
+    SSD1289
+  
+  configs/sam3u-ek/src/up_lcd.c
+  
+    The SAM3U-EK developement board features a TFT/Transmissive color
+    LCD module with touch-screen, FTM280C12D, with integrated driver IC
+    HX8346.
+
+  configs/stm3210e-eval/src/up_lcd.c
+
+    This driver supports the following LCDs:
+
+    1. Ampire AM-240320LTNQW00H
+    2. Orise Tech SPFD5408B
+    3. RenesasSP R61580
+     
+  configs/skp16c26/src/up_lcd.c.  Untest alphanumeric LCD driver.
+
+graphics/
+=========
+
+  See also the usage of the LCD driver in the graphics/ directory.