diff --git a/arch/arm/src/kl/Make.defs b/arch/arm/src/kl/Make.defs index d7712f0983c..6af672fd465 100644 --- a/arch/arm/src/kl/Make.defs +++ b/arch/arm/src/kl/Make.defs @@ -70,7 +70,7 @@ CMN_CSRCS += up_dumpnvic.c endif CHIP_ASRCS = -CHIP_CSRCS = kl_clockconfig.c kl_gpio.c kl_idle.c kl_irq.c kl_getc.c +CHIP_CSRCS = kl_clockconfig.c kl_gpio.c kl_idle.c kl_irq.c CHIP_CSRCS += kl_lowputc.c kl_serial.c kl_start.c kl_cfmconfig.c ifneq ($(CONFIG_SCHED_TICKLESS),y) diff --git a/arch/arm/src/kl/kl_getc.c b/arch/arm/src/kl/kl_getc.c deleted file mode 100644 index 8b63ec217d6..00000000000 --- a/arch/arm/src/kl/kl_getc.c +++ /dev/null @@ -1,96 +0,0 @@ -/**************************************************************************** - * arch/arm/src/kl/kl_getc.c - * - * Copyright (C) 2013, 2016 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name NuttX nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************/ - -/**************************************************************************** - * Included Files - ****************************************************************************/ - -#include - -#include - -#include "up_arch.h" - -#include "kl_config.h" -#include "kl_getc.h" - -/**************************************************************************** - * Pre-processor Definitions - ****************************************************************************/ - -/* Select UART parameters for the selected console */ - -#if defined(CONFIG_UART0_SERIAL_CONSOLE) -# define CONSOLE_BASE KL_UART0_BASE -#elif defined(CONFIG_UART1_SERIAL_CONSOLE) -# define CONSOLE_BASE KL_UART1_BASE -#elif defined(CONFIG_UART2_SERIAL_CONSOLE) -# define CONSOLE_BASE KL_UART2_BASE -#endif - -/**************************************************************************** - * Public Functions - ****************************************************************************/ - -/**************************************************************************** - * Name: up_getc - * - * Description: - * Input one byte from the serial console - * - * REVIST: If used with the serial driver enabled, then this could - * interfere with the serial driver operations. Serial interrupts should - * be disabled when this function executes in that case. - * - ****************************************************************************/ - -int up_getc(void) -{ - uint8_t ch = 0; - -#if defined HAVE_UART_DEVICE && defined HAVE_SERIAL_CONSOLE - /* Wait while the receiver data buffer is "empty" (RDRF) to assure that - * we have data in the buffer to read. - */ - - while ((getreg8(CONSOLE_BASE + KL_UART_S1_OFFSET) & UART_S1_RDRF) == 0); - - /* Then read a character from the UART data register */ - - ch = getreg8(CONSOLE_BASE + KL_UART_D_OFFSET); -#endif - - return (int)ch; -} diff --git a/arch/arm/src/kl/kl_getc.h b/arch/arm/src/kl/kl_getc.h deleted file mode 100644 index aff6b2a0b37..00000000000 --- a/arch/arm/src/kl/kl_getc.h +++ /dev/null @@ -1,48 +0,0 @@ -/************************************************************************************ - * arch/arm/src/kl/kl_getc.h - * - * Copyright (C) 2013, 2016 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name NuttX nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ************************************************************************************/ - -#ifndef __ARCH_ARM_SRC_KL_KINETIS_GETC_H -#define __ARCH_ARM_SRC_KL_KINETIS_GETC_H - -/************************************************************************************ - * Included Files - ************************************************************************************/ - -#include - -#include "kl_config.h" -#include "chip/kl_uart.h" - -#endif /* __ARCH_ARM_SRC_KL_KINETIS_GETC_H */ diff --git a/arch/arm/src/lpc11xx/Make.defs b/arch/arm/src/lpc11xx/Make.defs index a347d99946d..d9fcb5e1526 100644 --- a/arch/arm/src/lpc11xx/Make.defs +++ b/arch/arm/src/lpc11xx/Make.defs @@ -71,7 +71,7 @@ endif CHIP_ASRCS = CHIP_CSRCS = lpc11_clockconfig.c lpc11_gpio.c lpc11_i2c.c lpc11_idle.c -CHIP_CSRCS += lpc11_irq.c lpc11_lowputc.c lpc11_getc.c lpc11_serial.c +CHIP_CSRCS += lpc11_irq.c lpc11_lowputc.c lpc11_serial.c CHIP_CSRCS += lpc11_spi.c lpc11_ssp.c lpc11_start.c # Configuration-dependent LPC11xx files diff --git a/arch/arm/src/lpc11xx/lpc11_getc.c b/arch/arm/src/lpc11xx/lpc11_getc.c deleted file mode 100644 index f809e9d3438..00000000000 --- a/arch/arm/src/lpc11xx/lpc11_getc.c +++ /dev/null @@ -1,95 +0,0 @@ -/**************************************************************************** - * arch/arm/src/lpc11/lpc11_getc.c - * - * Copyright (C) 2015 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name NuttX nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************/ - -/**************************************************************************** - * Included Files - ****************************************************************************/ - -#include - -#include - -#include "up_arch.h" - -#include "lpc11_getc.h" - -/**************************************************************************** - * Pre-processor Definitions - ****************************************************************************/ - -/* Select UART parameters for the selected console */ - -#if defined(CONFIG_UART0_SERIAL_CONSOLE) -# define CONSOLE_BASE LPC11_UART0_BASE -#elif defined(CONFIG_UART1_SERIAL_CONSOLE) -# define CONSOLE_BASE LPC11_UART1_BASE -#elif defined(CONFIG_UART2_SERIAL_CONSOLE) -# define CONSOLE_BASE LPC11_UART2_BASE -#endif - -/**************************************************************************** - * Public Functions - ****************************************************************************/ - -/**************************************************************************** - * Name: up_getc - * - * Description: - * Input one byte from the serial console. - * - * REVIST: If used with the serial driver enabled, then this could - * interfere with the serial driver operations. Serial interrupts should - * be disabled when this function executes in that case. - * - ****************************************************************************/ - -int up_getc(void) -{ - uint8_t ch = 0; - -#if defined HAVE_UART && defined HAVE_SERIAL_CONSOLE - /* Wait while the Receiver Data Ready (RDR) is indicating a "empty" FIFO to - * assure that we have data in the buffer to read. - */ - - while ((getreg32(CONSOLE_BASE+LPC11_UART_LSR_OFFSET) & UART_LSR_RDR) == 0); - - /* Then read a character from the UART data register */ - - ch = getreg8(CONSOLE_BASE+LPC11_UART_RBR_OFFSET); -#endif - - return (int)ch; -} diff --git a/arch/arm/src/lpc11xx/lpc11_getc.h b/arch/arm/src/lpc11xx/lpc11_getc.h deleted file mode 100644 index e00864bfc48..00000000000 --- a/arch/arm/src/lpc11xx/lpc11_getc.h +++ /dev/null @@ -1,47 +0,0 @@ -/************************************************************************************ - * arch/arm/src/lpc11/lpc11_getc.h - * - * Copyright (C) 2015, 2016 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name NuttX nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ************************************************************************************/ - -#ifndef __ARCH_ARM_SRC_LPC11XX_LPC11_GETC_H -#define __ARCH_ARM_SRC_LPC11XX_LPC11_GETC_H - -/************************************************************************************ - * Included Files - ************************************************************************************/ - -#include -#include "lpc11_serial.h" -#include "chip/lpc11_uart.h" - -#endif /* __ARCH_ARM_SRC_LPC11XX_LPC11_GETC_H */ diff --git a/arch/arm/src/stm32/Make.defs b/arch/arm/src/stm32/Make.defs index 5cd35648931..8b10228a3a0 100644 --- a/arch/arm/src/stm32/Make.defs +++ b/arch/arm/src/stm32/Make.defs @@ -110,7 +110,7 @@ CHIP_ASRCS = CHIP_CSRCS = stm32_allocateheap.c stm32_start.c stm32_rcc.c stm32_lse.c CHIP_CSRCS += stm32_lsi.c stm32_gpio.c stm32_exti_gpio.c stm32_flash.c -CHIP_CSRCS += stm32_irq.c stm32_dma.c stm32_lowputc.c stm32_getc.c +CHIP_CSRCS += stm32_irq.c stm32_dma.c stm32_lowputc.c CHIP_CSRCS += stm32_serial.c stm32_spi.c stm32_sdio.c stm32_tim.c CHIP_CSRCS += stm32_waste.c stm32_ccm.c stm32_uid.c stm32_capture.c diff --git a/arch/arm/src/stm32/stm32.h b/arch/arm/src/stm32/stm32.h index f2304e27350..6680e81293f 100644 --- a/arch/arm/src/stm32/stm32.h +++ b/arch/arm/src/stm32/stm32.h @@ -78,7 +78,6 @@ #include "stm32_usbdev.h" #include "stm32_wdg.h" #include "stm32_lowputc.h" -#include "stm32_getc.h" #include "stm32_eth.h" #endif /* __ARCH_ARM_SRC_STM32_STM32_H */ diff --git a/arch/arm/src/stm32/stm32_getc.c b/arch/arm/src/stm32/stm32_getc.c deleted file mode 100644 index de9020bab40..00000000000 --- a/arch/arm/src/stm32/stm32_getc.c +++ /dev/null @@ -1,121 +0,0 @@ -/**************************************************************************** - * arch/arm/src/stm32/stm32_getc.c - * - * Copyright (C) 2016 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name NuttX nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************/ - -/**************************************************************************** - * Included Files - ****************************************************************************/ - -#include - -#include - -#include - -#include "up_internal.h" -#include "up_arch.h" - -#include "chip.h" - -#include "stm32.h" -#include "stm32_rcc.h" -#include "stm32_gpio.h" -#include "stm32_uart.h" - -/**************************************************************************** - * Pre-processor Definitions - ****************************************************************************/ - -/* Select U[S]ART console base address */ - -#ifdef HAVE_CONSOLE -# if defined(CONFIG_USART1_SERIAL_CONSOLE) -# define STM32_CONSOLE_BASE STM32_USART1_BASE -# elif defined(CONFIG_USART2_SERIAL_CONSOLE) -# define STM32_CONSOLE_BASE STM32_USART2_BASE -# elif defined(CONFIG_USART3_SERIAL_CONSOLE) -# define STM32_CONSOLE_BASE STM32_USART3_BASE -# elif defined(CONFIG_UART4_SERIAL_CONSOLE) -# define STM32_CONSOLE_BASE STM32_UART4_BASE -# elif defined(CONFIG_UART5_SERIAL_CONSOLE) -# define STM32_CONSOLE_BASE STM32_UART5_BASE -# elif defined(CONFIG_USART6_SERIAL_CONSOLE) -# define STM32_CONSOLE_BASE STM32_USART6_BASE -# elif defined(CONFIG_UART7_SERIAL_CONSOLE) -# define STM32_CONSOLE_BASE STM32_UART7_BASE -# elif defined(CONFIG_UART8_SERIAL_CONSOLE) -# define STM32_CONSOLE_BASE STM32_UART8_BASE -# endif -#endif - -/**************************************************************************** - * Public Functions - ****************************************************************************/ - -/**************************************************************************** - * Name: up_getc - * - * Description: - * Read one byte from the serial console - * - * REVIST: If used with the serial driver enabled, then this could - * interfere with the serial driver operations. Serial interrupts should - * be disabled when this function executes in that case. - * - ****************************************************************************/ - -int up_getc(void) -{ - uint32_t ch = 0; - -#ifdef HAVE_CONSOLE - /* While there is any error, read and discard bytes to clear the errors */ - - while ((getreg32(STM32_CONSOLE_BASE + STM32_USART_SR_OFFSET) & - (USART_SR_ORE | USART_SR_NE | USART_SR_FE | USART_SR_PE)) != 0) - { - (void)getreg32(STM32_CONSOLE_BASE + STM32_USART_RDR_OFFSET); - } - - /* Wait until the RX data register has a character to be read */ - - while ((getreg32(STM32_CONSOLE_BASE + STM32_USART_SR_OFFSET) & USART_SR_RXNE) == 0); - - /* Then read the character */ - - ch = getreg32(STM32_CONSOLE_BASE + STM32_USART_RDR_OFFSET); -#endif /* HAVE_CONSOLE */ - - return (int)ch; -} diff --git a/arch/arm/src/stm32/stm32_getc.h b/arch/arm/src/stm32/stm32_getc.h deleted file mode 100644 index 651165fba5e..00000000000 --- a/arch/arm/src/stm32/stm32_getc.h +++ /dev/null @@ -1,47 +0,0 @@ -/************************************************************************************ - * arch/arm/src/stm32/stm32_getc.h - * - * Copyright (C) 2016 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name NuttX nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ************************************************************************************/ - -#ifndef __ARCH_ARM_SRC_STM32_STM32_GETC_H -#define __ARCH_ARM_SRC_STM32_STM32_GETC_H - -/************************************************************************************ - * Included Files - ************************************************************************************/ - -#include - -#include "chip.h" - -#endif /* __ARCH_ARM_SRC_STM32_STM32_GETC_H */ diff --git a/configs/freedom-kl25z/README.txt b/configs/freedom-kl25z/README.txt index a4a806dd482..b5114b4d43c 100644 --- a/configs/freedom-kl25z/README.txt +++ b/configs/freedom-kl25z/README.txt @@ -294,98 +294,6 @@ instead of configure.sh: Where is one of the following: - minnsh: - ------ - - This is a experiment to see just how small we can get a usable NSH - configuration. This configuration has far fewer features than the nsh - configuration but is also a fraction of the size. - - 2016-06-21: - $ arm-none-eabi-size nuttx - text data bss dec hex filename - 12282 196 736 13214 339e nuttx - - This minnsh configuration is a "proof-of-concept" and not very usable in - its current state. This configuration was created by disabling - everything possible INCLUDING file system support. Without file system - support, NuttX is pretty much crippled. Here are some of the - consequences of disabling the file system: - - - All features that depend on the file system are lost: device drivers, - mountpoints, message queues, named semaphores. - - - Without device drivers, you cannot interact with the RTOS using POSIX - interfaces. You would have to work with NuttX as with those other - tiny RTOSs: As a scheduler and a callable hardare abstraction layer - (HAL). - - - You cannot use any of the NuttX upper half device drivers since they - depend on the pseudo-file system and device nodes. You can, of - course, continue to use the lower half drivers either directly. Or, - perhaps, you could write some custom minnsh upper half drivers that - do not depend on a file system and expose a HAL interface. - - There is a special version of readline() the NSH uses when there is no - file system. It uses a special up_putc() to write data to the console - and a special function up_getc() to read data from the console. - - - The current up_getc() implementationsa are a kludge. They are - analogous to the up_putc() implementations: They directly poll the - hardware for serial availability, locking up all lower priority tasks - in the entire system while they poll. So a version of NSH that uses - up_getc() essentially blocks the system until a character is received. - - This, of course, could be fixed by creating a special, upper half - implementation of the interrupt-driven serial lower half (like - stm32_serial) that just supports single character console I/O - (perhaps called up_putc and up_getc?). The NSH could wait for serial - input without blocking the system. But then that would increase the - footprint too. - - So although the minnsh configurations are a good starting point for - making things small, they not are really very practical. Why might - you want a NuttX minnsh solution? Perhaps you have software that runs - on a family of chips including some very tiny MCUs. Then perhaps having - the RTOS compatibility would justify the loss of functionality? - - You can re-enable the file system and (true) serial console with - these settings: - - Enable the file system: - CONFIG_NFILE_DESCRIPTORS=5 - CONFIG_NFILE_STREAMS=5 - - Enable the console device: - CONFIG_DEV_CONSOLE=y - - Disable most new NSH commands. Some like 'ls' are really mandatory - with a file system: - CONFIG_NSH_DISABLE_xxx=y - - Enable the upper half serial driver: - CONFIG_SERIAL=y - CONFIG_STANDARD_SERIAL=y - - Enable the USART1 serial driver: - CONFIG_STM32_USART1=y - CONFIG_STM32_USART1_SERIALDRIVER=y - CONFIG_USART1_SERIAL_CONSOLE=y - - CONFIG_USART1_2STOP=0 - CONFIG_USART1_BAUD=115200 - CONFIG_USART1_BITS=8 - CONFIG_USART1_PARITY=0 - CONFIG_USART1_RXBUFSIZE=16 - CONFIG_USART1_TXBUFSIZE=16 - - With these changes, NSH should behave better and we preserve the device - driver interface. But this result in a total size increase of about - 7KB: That is about 5KB of additional OS support for the file system and - serial console PLUS about 2KB for the 'ls' command logic (including OS - support for opendir(), readdir(), closedir(), stat(), and probably other - things). - nsh: --- Configures the NuttShell (nsh) located at apps/examples/nsh. The diff --git a/configs/freedom-kl25z/minnsh/Make.defs b/configs/freedom-kl25z/minnsh/Make.defs deleted file mode 100644 index 453b86e4cfa..00000000000 --- a/configs/freedom-kl25z/minnsh/Make.defs +++ /dev/null @@ -1,124 +0,0 @@ -############################################################################ -# configs/freedom-kl25z/minnsh/Make.defs -# -# Copyright (C) 2013 Gregory Nutt. All rights reserved. -# Author: Gregory Nutt -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in -# the documentation and/or other materials provided with the -# distribution. -# 3. Neither the name NuttX nor the names of its contributors may be -# used to endorse or promote products derived from this software -# without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE -# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, -# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, -# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS -# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED -# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN -# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -# POSSIBILITY OF SUCH DAMAGE. -# -############################################################################ - -include ${TOPDIR}/.config -include ${TOPDIR}/tools/Config.mk -include ${TOPDIR}/arch/arm/src/armv6-m/Toolchain.defs - -LDSCRIPT = ld.script - -ifeq ($(WINTOOL),y) - # Windows-native toolchains - ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" - ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}" - ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}" -else - # Linux/Cygwin-native toolchain - ARCHINCLUDES = -I. -isystem $(TOPDIR)/include - ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx - ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT) -endif - -CC = $(CROSSDEV)gcc -CXX = $(CROSSDEV)g++ -CPP = $(CROSSDEV)gcc -E -LD = $(CROSSDEV)ld -AR = $(ARCROSSDEV)ar rcs -NM = $(ARCROSSDEV)nm -OBJCOPY = $(CROSSDEV)objcopy -OBJDUMP = $(CROSSDEV)objdump - -ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'} -ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1} - -ifeq ($(CONFIG_DEBUG_SYMBOLS),y) - ARCHOPTIMIZATION = -g -endif - -ifneq ($(CONFIG_DEBUG_NOOPT),y) - ARCHOPTIMIZATION += $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer -endif - -ARCHCFLAGS = -fno-builtin -ARCHCXXFLAGS = -fno-builtin -fno-exceptions -fcheck-new -fno-rtti -ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow -Wundef -ARCHWARNINGSXX = -Wall -Wshadow -Wundef -ARCHDEFINES = -ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10 - -CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe -CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS) -CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe -CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS) -CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -AFLAGS = $(CFLAGS) -D__ASSEMBLY__ - -NXFLATLDFLAGS1 = -r -d -warn-common -NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat-pcrel.ld -no-check-sections -LDNXFLATFLAGS = -e main -s 2048 - -ASMEXT = .S -OBJEXT = .o -LIBEXT = .a -EXEEXT = - -ifneq ($(CROSSDEV),arm-nuttx-elf-) - LDFLAGS += -nostartfiles -nodefaultlibs -endif -ifeq ($(CONFIG_DEBUG_SYMBOLS),y) - LDFLAGS += -g -endif - - -HOSTCC = gcc -HOSTINCLUDES = -I. -HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -Wundef -g -pipe -HOSTLDFLAGS = -ifeq ($(CONFIG_HOST_WINDOWS),y) - HOSTEXEEXT = .exe -else - HOSTEXEEXT = -endif - -ifeq ($(WINTOOL),y) - # Windows-native host tools - DIRLINK = $(TOPDIR)/tools/copydir.sh - DIRUNLINK = $(TOPDIR)/tools/unlink.sh - MKDEP = $(TOPDIR)/tools/mkwindeps.sh -else - # Linux/Cygwin-native host tools - MKDEP = $(TOPDIR)/tools/mkdeps$(HOSTEXEEXT) -endif - diff --git a/configs/freedom-kl25z/minnsh/defconfig b/configs/freedom-kl25z/minnsh/defconfig deleted file mode 100644 index 1e47ae567a1..00000000000 --- a/configs/freedom-kl25z/minnsh/defconfig +++ /dev/null @@ -1,799 +0,0 @@ -# -# Automatically generated file; DO NOT EDIT. -# Nuttx/ Configuration -# - -# -# Build Setup -# -CONFIG_EXPERIMENTAL=y -CONFIG_DEFAULT_SMALL=y -CONFIG_HOST_LINUX=y -# CONFIG_HOST_OSX is not set -# CONFIG_HOST_WINDOWS is not set -# CONFIG_HOST_OTHER is not set - -# -# Build Configuration -# -# CONFIG_APPS_DIR="../apps" -CONFIG_BUILD_FLAT=y -# CONFIG_BUILD_2PASS is not set - -# -# Binary Output Formats -# -# CONFIG_RRLOAD_BINARY is not set -# CONFIG_INTELHEX_BINARY is not set -CONFIG_MOTOROLA_SREC=y -CONFIG_RAW_BINARY=y -# CONFIG_UBOOT_UIMAGE is not set - -# -# Customize Header Files -# -# CONFIG_ARCH_STDINT_H is not set -# CONFIG_ARCH_STDBOOL_H is not set -# CONFIG_ARCH_MATH_H is not set -# CONFIG_ARCH_FLOAT_H is not set -# CONFIG_ARCH_STDARG_H is not set -# CONFIG_ARCH_DEBUG_H is not set - -# -# Debug Options -# -# CONFIG_DEBUG_ALERT is not set -# CONFIG_DEBUG_FEATURES is not set -CONFIG_ARCH_HAVE_STACKCHECK=y -# CONFIG_STACK_COLORATION is not set -# CONFIG_ARCH_HAVE_HEAPCHECK is not set -# CONFIG_DEBUG_SYMBOLS is not set -CONFIG_ARCH_HAVE_CUSTOMOPT=y -# CONFIG_DEBUG_NOOPT is not set -# CONFIG_DEBUG_CUSTOMOPT is not set -CONFIG_DEBUG_FULLOPT=y - -# -# System Type -# -CONFIG_ARCH_ARM=y -# CONFIG_ARCH_AVR is not set -# CONFIG_ARCH_HC is not set -# CONFIG_ARCH_MIPS is not set -# CONFIG_ARCH_RENESAS is not set -# CONFIG_ARCH_SIM is not set -# CONFIG_ARCH_X86 is not set -# CONFIG_ARCH_Z16 is not set -# CONFIG_ARCH_Z80 is not set -CONFIG_ARCH="arm" - -# -# ARM Options -# -# CONFIG_ARCH_CHIP_A1X is not set -# CONFIG_ARCH_CHIP_C5471 is not set -# CONFIG_ARCH_CHIP_CALYPSO is not set -# CONFIG_ARCH_CHIP_DM320 is not set -# CONFIG_ARCH_CHIP_EFM32 is not set -# CONFIG_ARCH_CHIP_IMX1 is not set -# CONFIG_ARCH_CHIP_IMX6 is not set -# CONFIG_ARCH_CHIP_KINETIS is not set -CONFIG_ARCH_CHIP_KL=y -# CONFIG_ARCH_CHIP_LM is not set -# CONFIG_ARCH_CHIP_TIVA is not set -# CONFIG_ARCH_CHIP_LPC11XX is not set -# CONFIG_ARCH_CHIP_LPC17XX is not set -# CONFIG_ARCH_CHIP_LPC214X is not set -# CONFIG_ARCH_CHIP_LPC2378 is not set -# CONFIG_ARCH_CHIP_LPC31XX is not set -# CONFIG_ARCH_CHIP_LPC43XX is not set -# CONFIG_ARCH_CHIP_NUC1XX is not set -# CONFIG_ARCH_CHIP_SAMA5 is not set -# CONFIG_ARCH_CHIP_SAMD is not set -# CONFIG_ARCH_CHIP_SAML is not set -# CONFIG_ARCH_CHIP_SAM34 is not set -# CONFIG_ARCH_CHIP_SAMV7 is not set -# CONFIG_ARCH_CHIP_STM32 is not set -# CONFIG_ARCH_CHIP_STM32F7 is not set -# CONFIG_ARCH_CHIP_STM32L4 is not set -# CONFIG_ARCH_CHIP_STR71X is not set -# CONFIG_ARCH_CHIP_TMS570 is not set -# CONFIG_ARCH_CHIP_MOXART is not set -# CONFIG_ARCH_ARM7TDMI is not set -# CONFIG_ARCH_ARM926EJS is not set -# CONFIG_ARCH_ARM920T is not set -CONFIG_ARCH_CORTEXM0=y -# CONFIG_ARCH_CORTEXM3 is not set -# CONFIG_ARCH_CORTEXM4 is not set -# CONFIG_ARCH_CORTEXM7 is not set -# CONFIG_ARCH_CORTEXA5 is not set -# CONFIG_ARCH_CORTEXA8 is not set -# CONFIG_ARCH_CORTEXA9 is not set -# CONFIG_ARCH_CORTEXR4 is not set -# CONFIG_ARCH_CORTEXR4F is not set -# CONFIG_ARCH_CORTEXR5 is not set -# CONFIG_ARCH_CORTEX5F is not set -# CONFIG_ARCH_CORTEXR7 is not set -# CONFIG_ARCH_CORTEXR7F is not set -CONFIG_ARCH_FAMILY="armv6-m" -CONFIG_ARCH_CHIP="kl" -# CONFIG_ARM_TOOLCHAIN_IAR is not set -# CONFIG_ARM_TOOLCHAIN_GNU is not set -CONFIG_ARCH_HAVE_CMNVECTOR=y -# CONFIG_ARMV7M_CMNVECTOR is not set -# CONFIG_ARMV7M_LAZYFPU is not set -# CONFIG_ARCH_HAVE_FPU is not set -# CONFIG_ARCH_HAVE_DPFPU is not set -# CONFIG_ARCH_HAVE_TRUSTZONE is not set -# CONFIG_ARM_HAVE_MPU_UNIFIED is not set - -# -# ARMV6M Configuration Options -# -# CONFIG_ARMV6M_TOOLCHAIN_BUILDROOT is not set -# CONFIG_ARMV6M_TOOLCHAIN_CODEREDL is not set -# CONFIG_ARMV6M_TOOLCHAIN_CODESOURCERYL is not set -CONFIG_ARMV6M_TOOLCHAIN_GNU_EABIL=y -# CONFIG_KL_GPIOIRQ is not set - -# -# Kinetis Configuration Options -# -# CONFIG_ARCH_CHIP_MKL25Z64 is not set -CONFIG_ARCH_CHIP_MKL25Z128=y -# CONFIG_ARCH_CHIP_MKL26Z128 is not set -CONFIG_ARCH_FAMILY_KL2X=y - -# -# Kinetis Peripheral Support -# -# CONFIG_KL_TRACE is not set -# CONFIG_KL_FLEXBUS is not set -CONFIG_KL_UART0=y -# CONFIG_KL_UART1 is not set -# CONFIG_KL_UART2 is not set -# CONFIG_KL_FLEXCAN0 is not set -# CONFIG_KL_FLEXCAN1 is not set -CONFIG_KL_SPI0=y -CONFIG_KL_SPI1=y -# CONFIG_KL_SPI2 is not set -# CONFIG_KL_I2C0 is not set -# CONFIG_KL_I2C1 is not set -# CONFIG_KL_I2S is not set -# CONFIG_KL_DAC0 is not set -# CONFIG_KL_DAC1 is not set -# CONFIG_KL_ADC0 is not set -# CONFIG_KL_ADC1 is not set -# CONFIG_KL_CMP is not set -# CONFIG_KL_VREF is not set -# CONFIG_KL_TPM0 is not set -# CONFIG_KL_TPM1 is not set -# CONFIG_KL_TPM2 is not set -# CONFIG_KL_LPTIMER is not set -# CONFIG_KL_RTC is not set -# CONFIG_KL_EWM is not set -# CONFIG_KL_CMT is not set -# CONFIG_KL_USBOTG is not set -# CONFIG_KL_USBDCD is not set -# CONFIG_KL_LLWU is not set -# CONFIG_KL_TSI is not set -# CONFIG_KL_FTFL is not set -# CONFIG_KL_DMA is not set -# CONFIG_KL_CRC is not set -# CONFIG_KL_PDB is not set -# CONFIG_KL_PIT is not set -CONFIG_KL_SYSTICK_CORECLK=y -# CONFIG_KL_SYSTICK_CORECLK_DIV16 is not set - -# -# Kinetis GPIO Interrupt Configuration -# - -# -# Architecture Options -# -# CONFIG_ARCH_NOINTC is not set -# CONFIG_ARCH_VECNOTIRQ is not set -# CONFIG_ARCH_DMA is not set -CONFIG_ARCH_HAVE_IRQPRIO=y -# CONFIG_ARCH_L2CACHE is not set -# CONFIG_ARCH_HAVE_COHERENT_DCACHE is not set -# CONFIG_ARCH_HAVE_ADDRENV is not set -# CONFIG_ARCH_NEED_ADDRENV_MAPPING is not set -# CONFIG_ARCH_HAVE_MULTICPU is not set -CONFIG_ARCH_HAVE_VFORK=y -# CONFIG_ARCH_HAVE_MMU is not set -# CONFIG_ARCH_HAVE_MPU is not set -# CONFIG_ARCH_NAND_HWECC is not set -# CONFIG_ARCH_HAVE_EXTCLK is not set -# CONFIG_ARCH_HAVE_POWEROFF is not set -CONFIG_ARCH_HAVE_RESET=y -# CONFIG_ARCH_IRQPRIO is not set -# CONFIG_ARCH_STACKDUMP is not set -# CONFIG_ENDIAN_BIG is not set -# CONFIG_ARCH_IDLE_CUSTOM is not set -# CONFIG_ARCH_HAVE_RAMFUNCS is not set -# CONFIG_ARCH_HAVE_RAMVECTORS is not set - -# -# Board Settings -# -CONFIG_BOARD_LOOPSPERMSEC=2988 -# CONFIG_ARCH_CALIBRATION is not set - -# -# Interrupt options -# -CONFIG_ARCH_HAVE_INTERRUPTSTACK=y -CONFIG_ARCH_INTERRUPTSTACK=0 -# CONFIG_ARCH_HAVE_HIPRI_INTERRUPT is not set - -# -# Boot options -# -# CONFIG_BOOT_RUNFROMEXTSRAM is not set -CONFIG_BOOT_RUNFROMFLASH=y -# CONFIG_BOOT_RUNFROMISRAM is not set -# CONFIG_BOOT_RUNFROMSDRAM is not set -# CONFIG_BOOT_COPYTORAM is not set - -# -# Boot Memory Configuration -# -CONFIG_RAM_START=0x1FFFF000 -CONFIG_RAM_SIZE=16384 -# CONFIG_ARCH_HAVE_SDRAM is not set - -# -# Board Selection -# -CONFIG_ARCH_BOARD_FREEDOM_KL25Z=y -# CONFIG_ARCH_BOARD_CUSTOM is not set -CONFIG_ARCH_BOARD="freedom-kl25z" - -# -# Common Board Options -# -CONFIG_ARCH_HAVE_LEDS=y -CONFIG_ARCH_LEDS=y -CONFIG_NSH_MMCSDMINOR=0 - -# -# Board-Specific Options -# -# CONFIG_LIB_BOARDCTL is not set - -# -# RTOS Features -# -CONFIG_DISABLE_OS_API=y -CONFIG_DISABLE_POSIX_TIMERS=y -CONFIG_DISABLE_PTHREAD=y -CONFIG_DISABLE_SIGNALS=y -CONFIG_DISABLE_MQUEUE=y -CONFIG_DISABLE_ENVIRON=y - -# -# Clocks and Timers -# -CONFIG_USEC_PER_TICK=10000 -# CONFIG_SYSTEM_TIME64 is not set -# CONFIG_CLOCK_MONOTONIC is not set -# CONFIG_JULIAN_TIME is not set -CONFIG_START_YEAR=2013 -CONFIG_START_MONTH=2 -CONFIG_START_DAY=26 -CONFIG_MAX_WDOGPARMS=2 -CONFIG_PREALLOC_WDOGS=4 -CONFIG_WDOG_INTRESERVE=0 -CONFIG_PREALLOC_TIMERS=0 - -# -# Tasks and Scheduling -# -# CONFIG_SPINLOCK is not set -# CONFIG_INIT_NONE is not set -CONFIG_INIT_ENTRYPOINT=y -# CONFIG_INIT_FILEPATH is not set -CONFIG_USER_ENTRYPOINT="nsh_main" -CONFIG_RR_INTERVAL=0 -# CONFIG_SCHED_SPORADIC is not set -CONFIG_TASK_NAME_SIZE=0 -CONFIG_MAX_TASKS=8 -# CONFIG_SCHED_HAVE_PARENT is not set -# CONFIG_SCHED_WAITPID is not set - -# -# Performance Monitoring -# -# CONFIG_SCHED_CPULOAD is not set -# CONFIG_SCHED_INSTRUMENTATION is not set - -# -# Files and I/O -# -# CONFIG_DEV_CONSOLE is not set -CONFIG_FDCLONE_DISABLE=y -# CONFIG_FDCLONE_STDIO is not set -CONFIG_SDCLONE_DISABLE=y -CONFIG_NFILE_DESCRIPTORS=0 -CONFIG_NFILE_STREAMS=0 -CONFIG_NAME_MAX=32 -# CONFIG_PRIORITY_INHERITANCE is not set - -# -# RTOS hooks -# -# CONFIG_BOARD_INITIALIZE is not set -# CONFIG_SCHED_STARTHOOK is not set -# CONFIG_SCHED_ATEXIT is not set -# CONFIG_SCHED_ONEXIT is not set -# CONFIG_MODULE is not set - -# -# Work queue support -# - -# -# Stack and heap information -# -CONFIG_IDLETHREAD_STACKSIZE=1024 -CONFIG_USERMAIN_STACKSIZE=1536 -CONFIG_PTHREAD_STACK_MIN=256 -CONFIG_PTHREAD_STACK_DEFAULT=1536 -# CONFIG_LIB_SYSCALL is not set - -# -# Device Drivers -# -CONFIG_DISABLE_POLL=y -# CONFIG_DEV_NULL is not set -# CONFIG_DEV_ZERO is not set -# CONFIG_DEV_LOOP is not set - -# -# Buffering -# -# CONFIG_DRVR_WRITEBUFFER is not set -# CONFIG_DRVR_READAHEAD is not set -# CONFIG_RAMDISK is not set -# CONFIG_CAN is not set -# CONFIG_ARCH_HAVE_PWM_PULSECOUNT is not set -# CONFIG_ARCH_HAVE_PWM_MULTICHAN is not set -# CONFIG_PWM is not set -# CONFIG_ARCH_HAVE_I2CRESET is not set -# CONFIG_I2C is not set -CONFIG_SPI=y -# CONFIG_SPI_SLAVE is not set -CONFIG_SPI_EXCHANGE=y -# CONFIG_SPI_CMDDATA is not set -# CONFIG_SPI_CALLBACK is not set -# CONFIG_SPI_BITBANG is not set -# CONFIG_SPI_HWFEATURES is not set -# CONFIG_SPI_CRCGENERATION is not set -# CONFIG_SPI_CS_CONTROL is not set -# CONFIG_SPI_CS_DELAY_CONTROL is not set -# CONFIG_I2S is not set - -# -# Timer Driver Support -# -# CONFIG_TIMER is not set -# CONFIG_RTC is not set -# CONFIG_WATCHDOG is not set -# CONFIG_ANALOG is not set -# CONFIG_AUDIO_DEVICES is not set -# CONFIG_VIDEO_DEVICES is not set -# CONFIG_BCH is not set -# CONFIG_INPUT is not set -# CONFIG_IOEXPANDER is not set - -# -# LCD Driver Support -# -# CONFIG_LCD is not set -# CONFIG_SLCD is not set - -# -# LED Support -# -# CONFIG_USERLED is not set -# CONFIG_RGBLED is not set -# CONFIG_PCA9635PW is not set -# CONFIG_NCP5623C is not set -# CONFIG_MMCSD is not set -# CONFIG_MODEM is not set -# CONFIG_MTD is not set -# CONFIG_EEPROM is not set -# CONFIG_PIPES is not set -# CONFIG_PM is not set -# CONFIG_POWER is not set -# CONFIG_SENSORS is not set -# CONFIG_SERCOMM_CONSOLE is not set -CONFIG_SERIAL=y -# CONFIG_SERIAL_REMOVABLE is not set -CONFIG_SERIAL_CONSOLE=y -# CONFIG_16550_UART is not set -# CONFIG_UART_SERIALDRIVER is not set -CONFIG_UART0_SERIALDRIVER=y -# CONFIG_UART1_SERIALDRIVER is not set -# CONFIG_UART2_SERIALDRIVER is not set -# CONFIG_UART3_SERIALDRIVER is not set -# CONFIG_UART4_SERIALDRIVER is not set -# CONFIG_UART5_SERIALDRIVER is not set -# CONFIG_UART6_SERIALDRIVER is not set -# CONFIG_UART7_SERIALDRIVER is not set -# CONFIG_UART8_SERIALDRIVER is not set -# CONFIG_SCI0_SERIALDRIVER is not set -# CONFIG_SCI1_SERIALDRIVER is not set -# CONFIG_USART0_SERIALDRIVER is not set -# CONFIG_USART1_SERIALDRIVER is not set -# CONFIG_USART2_SERIALDRIVER is not set -# CONFIG_USART3_SERIALDRIVER is not set -# CONFIG_USART4_SERIALDRIVER is not set -# CONFIG_USART5_SERIALDRIVER is not set -# CONFIG_USART6_SERIALDRIVER is not set -# CONFIG_USART7_SERIALDRIVER is not set -# CONFIG_USART8_SERIALDRIVER is not set -# CONFIG_OTHER_UART_SERIALDRIVER is not set -CONFIG_MCU_SERIAL=y -# CONFIG_STANDARD_SERIAL is not set -# CONFIG_SERIAL_IFLOWCONTROL is not set -# CONFIG_SERIAL_OFLOWCONTROL is not set -# CONFIG_SERIAL_DMA is not set -# CONFIG_ARCH_HAVE_SERIAL_TERMIOS is not set -CONFIG_UART0_SERIAL_CONSOLE=y -# CONFIG_OTHER_SERIAL_CONSOLE is not set -# CONFIG_NO_SERIAL_CONSOLE is not set - -# -# UART0 Configuration -# -CONFIG_UART0_RXBUFSIZE=256 -CONFIG_UART0_TXBUFSIZE=256 -CONFIG_UART0_BAUD=115200 -CONFIG_UART0_BITS=8 -CONFIG_UART0_PARITY=0 -CONFIG_UART0_2STOP=0 -# CONFIG_UART0_IFLOWCONTROL is not set -# CONFIG_UART0_OFLOWCONTROL is not set -# CONFIG_UART0_DMA is not set -# CONFIG_USBDEV is not set -# CONFIG_USBHOST is not set -# CONFIG_DRIVERS_WIRELESS is not set - -# -# System Logging -# -# CONFIG_ARCH_SYSLOG is not set -# CONFIG_RAMLOG is not set -# CONFIG_SYSLOG_INTBUFFER is not set -# CONFIG_SYSLOG_TIMESTAMP is not set -# CONFIG_SYSLOG_SERIAL_CONSOLE is not set -# CONFIG_SYSLOG_CHAR is not set -CONFIG_SYSLOG_NONE=y -# CONFIG_SYSLOG_FILE is not set - -# -# Networking Support -# -# CONFIG_ARCH_HAVE_NET is not set -# CONFIG_ARCH_HAVE_PHY is not set -# CONFIG_NET is not set - -# -# Crypto API -# -# CONFIG_CRYPTO is not set - -# -# File Systems -# - -# -# File system configuration -# -CONFIG_DISABLE_MOUNTPOINT=y -CONFIG_DISABLE_PSEUDOFS_OPERATIONS=y -# CONFIG_FS_READABLE is not set -# CONFIG_FS_WRITABLE is not set -# CONFIG_FS_NAMED_SEMAPHORES is not set -# CONFIG_FS_RAMMAP is not set -# CONFIG_FS_PROCFS is not set -# CONFIG_FS_UNIONFS is not set - -# -# Graphics Support -# -# CONFIG_NX is not set - -# -# Memory Management -# -CONFIG_MM_SMALL=y -CONFIG_MM_REGIONS=1 -# CONFIG_ARCH_HAVE_HEAP2 is not set -# CONFIG_GRAN is not set - -# -# Audio Support -# -# CONFIG_AUDIO is not set - -# -# Wireless Support -# -# CONFIG_WIRELESS is not set - -# -# Binary Loader -# -# CONFIG_BINFMT_DISABLE is not set -# CONFIG_NXFLAT is not set -# CONFIG_ELF is not set -# CONFIG_BUILTIN is not set -# CONFIG_PIC is not set -# CONFIG_SYMTAB_ORDEREDBYNAME is not set - -# -# Library Routines -# - -# -# Standard C Library Options -# -CONFIG_STDIO_BUFFER_SIZE=0 -CONFIG_STDIO_LINEBUFFER=y -CONFIG_NUNGET_CHARS=0 -# CONFIG_LIBM is not set -CONFIG_NOPRINTF_FIELDWIDTH=y -# CONFIG_LIBC_FLOATINGPOINT is not set -# CONFIG_LIBC_LONG_LONG is not set -# CONFIG_LIBC_IOCTL_VARIADIC is not set -CONFIG_LIB_RAND_ORDER=1 -# CONFIG_EOL_IS_CR is not set -# CONFIG_EOL_IS_LF is not set -# CONFIG_EOL_IS_BOTH_CRLF is not set -CONFIG_EOL_IS_EITHER_CRLF=y -# CONFIG_LIBC_EXECFUNCS is not set -CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=1024 -CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=1536 -# CONFIG_LIBC_STRERROR is not set -# CONFIG_LIBC_PERROR_STDOUT is not set -CONFIG_ARCH_LOWPUTC=y -# CONFIG_TIME_EXTENDED is not set -CONFIG_LIB_SENDFILE_BUFSIZE=512 -# CONFIG_ARCH_ROMGETC is not set -# CONFIG_ARCH_OPTIMIZED_FUNCTIONS is not set -CONFIG_ARCH_HAVE_TLS=y -# CONFIG_TLS is not set -# CONFIG_LIBC_NETDB is not set - -# -# Non-standard Library Support -# -# CONFIG_LIB_CRC64_FAST is not set -# CONFIG_LIB_KBDCODEC is not set -# CONFIG_LIB_SLCDCODEC is not set - -# -# Basic CXX Support -# -# CONFIG_C99_BOOL8 is not set -# CONFIG_HAVE_CXX is not set - -# -# Application Configuration -# - -# -# CAN Utilities -# - -# -# Examples -# -# CONFIG_EXAMPLES_CHAT is not set -# CONFIG_EXAMPLES_CONFIGDATA is not set -# CONFIG_EXAMPLES_CPUHOG is not set -# CONFIG_EXAMPLES_DHCPD is not set -# CONFIG_EXAMPLES_ELF is not set -# CONFIG_EXAMPLES_FTPC is not set -# CONFIG_EXAMPLES_FTPD is not set -# CONFIG_EXAMPLES_HELLO is not set -# CONFIG_EXAMPLES_HIDKBD is not set -# CONFIG_EXAMPLES_IGMP is not set -# CONFIG_EXAMPLES_JSON is not set -# CONFIG_EXAMPLES_KEYPADTEST is not set -# CONFIG_EXAMPLES_MEDIA is not set -# CONFIG_EXAMPLES_MM is not set -# CONFIG_EXAMPLES_MODBUS is not set -# CONFIG_EXAMPLES_MOUNT is not set -# CONFIG_EXAMPLES_NRF24L01TERM is not set -CONFIG_EXAMPLES_NSH=y -# CONFIG_EXAMPLES_NULL is not set -# CONFIG_EXAMPLES_NX is not set -# CONFIG_EXAMPLES_NXFFS is not set -# CONFIG_EXAMPLES_NXHELLO is not set -# CONFIG_EXAMPLES_NXIMAGE is not set -# CONFIG_EXAMPLES_NXLINES is not set -# CONFIG_EXAMPLES_NXTERM is not set -# CONFIG_EXAMPLES_NXTEXT is not set -# CONFIG_EXAMPLES_OSTEST is not set -# CONFIG_EXAMPLES_PCA9635 is not set -# CONFIG_EXAMPLES_PIPE is not set -# CONFIG_EXAMPLES_POLL is not set -# CONFIG_EXAMPLES_POSIXSPAWN is not set -# CONFIG_EXAMPLES_PPPD is not set -# CONFIG_EXAMPLES_RGBLED is not set -# CONFIG_EXAMPLES_SENDMAIL is not set -# CONFIG_EXAMPLES_SERIALBLASTER is not set -# CONFIG_EXAMPLES_SERIALRX is not set -# CONFIG_EXAMPLES_SERLOOP is not set -# CONFIG_EXAMPLES_SLCD is not set -# CONFIG_EXAMPLES_SMART is not set -# CONFIG_EXAMPLES_SMP is not set -# CONFIG_EXAMPLES_TCPECHO is not set -# CONFIG_EXAMPLES_TELNETD is not set -# CONFIG_EXAMPLES_TIFF is not set -# CONFIG_EXAMPLES_TOUCHSCREEN is not set -# CONFIG_EXAMPLES_USBTERM is not set -# CONFIG_EXAMPLES_WATCHDOG is not set -# CONFIG_EXAMPLES_WEBSERVER is not set - -# -# File System Utilities -# -# CONFIG_FSUTILS_INIFILE is not set - -# -# GPS Utilities -# -# CONFIG_GPSUTILS_MINMEA_LIB is not set - -# -# Graphics Support -# -# CONFIG_TIFF is not set -# CONFIG_GRAPHICS_TRAVELER is not set - -# -# Interpreters -# -# CONFIG_INTERPRETERS_FICL is not set -# CONFIG_INTERPRETERS_MICROPYTHON is not set -# CONFIG_INTERPRETERS_PCODE is not set - -# -# FreeModBus -# -# CONFIG_MODBUS is not set - -# -# Network Utilities -# -# CONFIG_NETUTILS_CODECS is not set -# CONFIG_NETUTILS_ESP8266 is not set -# CONFIG_NETUTILS_FTPC is not set -# CONFIG_NETUTILS_JSON is not set -# CONFIG_NETUTILS_SMTP is not set - -# -# NSH Library -# -CONFIG_NSH_LIBRARY=y -# CONFIG_NSH_MOTD is not set - -# -# Command Line Configuration -# -CONFIG_NSH_READLINE=y -# CONFIG_NSH_CLE is not set -CONFIG_NSH_LINELEN=80 -CONFIG_NSH_DISABLE_SEMICOLON=y -CONFIG_NSH_MAXARGUMENTS=6 -# CONFIG_NSH_ARGCAT is not set -CONFIG_NSH_NESTDEPTH=3 -# CONFIG_NSH_DISABLEBG is not set - -# -# Disable Individual commands -# -CONFIG_NSH_DISABLE_ADDROUTE=y -CONFIG_NSH_DISABLE_BASENAME=y -# CONFIG_NSH_DISABLE_CAT is not set -CONFIG_NSH_DISABLE_CD=y -CONFIG_NSH_DISABLE_CP=y -# CONFIG_NSH_DISABLE_CMP is not set -CONFIG_NSH_DISABLE_DATE=y -CONFIG_NSH_DISABLE_DD=y -CONFIG_NSH_DISABLE_DF=y -CONFIG_NSH_DISABLE_DELROUTE=y -CONFIG_NSH_DISABLE_DIRNAME=y -# CONFIG_NSH_DISABLE_ECHO is not set -# CONFIG_NSH_DISABLE_EXEC is not set -# CONFIG_NSH_DISABLE_EXIT is not set -# CONFIG_NSH_DISABLE_FREE is not set -CONFIG_NSH_DISABLE_GET=y -# CONFIG_NSH_DISABLE_HELP is not set -# CONFIG_NSH_DISABLE_HEXDUMP is not set -CONFIG_NSH_DISABLE_IFCONFIG=y -CONFIG_NSH_DISABLE_IFUPDOWN=y -# CONFIG_NSH_DISABLE_KILL is not set -CONFIG_NSH_DISABLE_LOSETUP=y -CONFIG_NSH_DISABLE_LOSMART=y -# CONFIG_NSH_DISABLE_LS is not set -# CONFIG_NSH_DISABLE_MB is not set -CONFIG_NSH_DISABLE_MKDIR=y -# CONFIG_NSH_DISABLE_MKFIFO is not set -CONFIG_NSH_DISABLE_MKRD=y -# CONFIG_NSH_DISABLE_MH is not set -CONFIG_NSH_DISABLE_MOUNT=y -# CONFIG_NSH_DISABLE_MV is not set -# CONFIG_NSH_DISABLE_MW is not set -# CONFIG_NSH_DISABLE_PS is not set -CONFIG_NSH_DISABLE_PUT=y -# CONFIG_NSH_DISABLE_PWD is not set -CONFIG_NSH_DISABLE_RM=y -CONFIG_NSH_DISABLE_RMDIR=y -# CONFIG_NSH_DISABLE_SET is not set -# CONFIG_NSH_DISABLE_SH is not set -# CONFIG_NSH_DISABLE_SLEEP is not set -CONFIG_NSH_DISABLE_TIME=y -# CONFIG_NSH_DISABLE_TEST is not set -CONFIG_NSH_DISABLE_UMOUNT=y -CONFIG_NSH_DISABLE_UNAME=y -# CONFIG_NSH_DISABLE_UNSET is not set -# CONFIG_NSH_DISABLE_USLEEP is not set -CONFIG_NSH_DISABLE_WGET=y -# CONFIG_NSH_DISABLE_XD is not set - -# -# Configure Command Options -# -CONFIG_NSH_CODECS_BUFSIZE=128 -# CONFIG_NSH_CMDOPT_HEXDUMP is not set -CONFIG_NSH_FILEIOSIZE=64 - -# -# Scripting Support -# -CONFIG_NSH_DISABLESCRIPT=y - -# -# Console Configuration -# -CONFIG_NSH_CONSOLE=y -# CONFIG_NSH_ALTCONDEV is not set -# CONFIG_NSH_ARCHINIT is not set -# CONFIG_NSH_LOGIN is not set -# CONFIG_NSH_CONSOLE_LOGIN is not set - -# -# NxWidgets/NxWM -# - -# -# Platform-specific Support -# -# CONFIG_PLATFORM_CONFIGDATA is not set - -# -# System Libraries and NSH Add-Ons -# -# CONFIG_SYSTEM_CLE is not set -# CONFIG_SYSTEM_CUTERM is not set -# CONFIG_SYSTEM_FREE is not set -# CONFIG_LIB_HEX2BIN is not set -# CONFIG_SYSTEM_HEXED is not set -# CONFIG_SYSTEM_INSTALL is not set -# CONFIG_SYSTEM_RAMTEST is not set -CONFIG_READLINE_HAVE_EXTMATCH=y -CONFIG_SYSTEM_READLINE=y -CONFIG_READLINE_ECHO=y -# CONFIG_READLINE_TABCOMPLETION is not set -# CONFIG_READLINE_CMD_HISTORY is not set -# CONFIG_SYSTEM_SUDOKU is not set -# CONFIG_SYSTEM_UBLOXMODEM is not set -# CONFIG_SYSTEM_VI is not set -# CONFIG_SYSTEM_ZMODEM is not set diff --git a/configs/freedom-kl25z/minnsh/setenv.sh b/configs/freedom-kl25z/minnsh/setenv.sh deleted file mode 100755 index 2541df62fdf..00000000000 --- a/configs/freedom-kl25z/minnsh/setenv.sh +++ /dev/null @@ -1,75 +0,0 @@ -#!/bin/bash -# configs/freedom-kl25z/minnsh/setenv.sh -# -# Copyright (C) 2013 Gregory Nutt. All rights reserved. -# Author: Gregory Nutt -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in -# the documentation and/or other materials provided with the -# distribution. -# 3. Neither the name NuttX nor the names of its contributors may be -# used to endorse or promote products derived from this software -# without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE -# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, -# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, -# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS -# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED -# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN -# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -# POSSIBILITY OF SUCH DAMAGE. -# - -if [ "$_" = "$0" ] ; then - echo "You must source this script, not run it!" 1>&2 - exit 1 -fi - -WD=`pwd` -if [ ! -x "setenv.sh" ]; then - echo "This script must be executed from the top-level NuttX build directory" - exit 1 -fi - -if [ -z "${PATH_ORIG}" ]; then - export PATH_ORIG="${PATH}" -fi - -# This is the Cygwin path to the location where I installed the RIDE -# toolchain under windows. You will also have to edit this if you install -# the RIDE toolchain in any other location -#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/Raisonance/Ride/arm-gcc/bin" - -# This is the Cygwin path to the location where I installed the CodeSourcery -# toolchain under windows. You will also have to edit this if you install -# the CodeSourcery toolchain in any other location -#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin" - -# These are the Cygwin paths to the locations where I installed the Atollic -# toolchain under windows. You will also have to edit this if you install -# the Atollic toolchain in any other location. /usr/bin is added before -# the Atollic bin path because there is are binaries named gcc.exe and g++.exe -# at those locations as well. -#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for ARM Pro 2.3.0/ARMTools/bin" -#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for STMicroelectronics STM32 Lite 2.3.0/ARMTools/bin" - -# This is the Cygwin path to the location where I build the buildroot -# toolchain. -export TOOLCHAIN_BIN="${WD}/../buildroot/build_arm_nofpu/staging_dir/bin" - -# Add the path to the toolchain to the PATH varialble -export PATH="${TOOLCHAIN_BIN}:/sbin:/usr/sbin:${PATH_ORIG}" - -echo "PATH : ${PATH}" diff --git a/configs/freedom-kl26z/README.txt b/configs/freedom-kl26z/README.txt index 55f593c7d07..6237f71ad9f 100644 --- a/configs/freedom-kl26z/README.txt +++ b/configs/freedom-kl26z/README.txt @@ -272,93 +272,6 @@ instead of configure.sh: Where is one of the following: - minnsh: - ------ - - This is a experiment to see just how small we can get a usable NSH - configuration. This configuration has far fewer features than the nsh - configuration but is also a fraction of the size. - - This minnsh configuration is a "proof-of-concept" and not very usable in - its current state. This configuration was created by disabling - everything possible INCLUDING file system support. Without file system - support, NuttX is pretty much crippled. Here are some of the - consequences of disabling the file system: - - - All features that depend on the file system are lost: device drivers, - mountpoints, message queues, named semaphores. - - - Without device drivers, you cannot interact with the RTOS using POSIX - interfaces. You would have to work with NuttX as with those other - tiny RTOSs: As a scheduler and a callable hardare abstraction layer - (HAL). - - - You cannot use any of the NuttX upper half device drivers since they - depend on the pseudo-file system and device nodes. You can, of - course, continue to use the lower half drivers either directly. Or, - perhaps, you could write some custom minnsh upper half drivers that - do not depend on a file system and expose a HAL interface. - - There is a special version of readline() the NSH uses when there is no - file system. It uses a special up_putc() to write data to the console - and a special function up_getc() to read data from the console. - - - The current up_getc() implementationsa are a kludge. They are - analogous to the up_putc() implementations: They directly poll the - hardware for serial availability, locking up all lower priority tasks - in the entire system while they poll. So a version of NSH that uses - up_getc() essentially blocks the system until a character is received. - - This, of course, could be fixed by creating a special, upper half - implementation of the interrupt-driven serial lower half (like - stm32_serial) that just supports single character console I/O - (perhaps called up_putc and up_getc?). The NSH could wait for serial - input without blocking the system. But then that would increase the - footprint too. - - So although the minnsh configurations are a good starting point for - making things small, they not are really very practical. Why might - you want a NuttX minnsh solution? Perhaps you have software that runs - on a family of chips including some very tiny MCUs. Then perhaps having - the RTOS compatibility would justify the loss of functionality? - - You can re-enable the file system and (true) serial console with - these settings: - - Enable the file system: - CONFIG_NFILE_DESCRIPTORS=5 - CONFIG_NFILE_STREAMS=5 - - Enable the console device: - CONFIG_DEV_CONSOLE=y - - Disable most new NSH commands. Some like 'ls' are really mandatory - with a file system: - CONFIG_NSH_DISABLE_xxx=y - - Enable the upper half serial driver: - CONFIG_SERIAL=y - CONFIG_STANDARD_SERIAL=y - - Enable the USART1 serial driver: - CONFIG_STM32_USART1=y - CONFIG_STM32_USART1_SERIALDRIVER=y - CONFIG_USART1_SERIAL_CONSOLE=y - - CONFIG_USART1_2STOP=0 - CONFIG_USART1_BAUD=115200 - CONFIG_USART1_BITS=8 - CONFIG_USART1_PARITY=0 - CONFIG_USART1_RXBUFSIZE=16 - CONFIG_USART1_TXBUFSIZE=16 - - With these changes, NSH should behave better and we preserve the device - driver interface. But this result in a total size increase of about - 7KB: That is about 5KB of additional OS support for the file system and - serial console PLUS about 2KB for the 'ls' command logic (including OS - support for opendir(), readdir(), closedir(), stat(), and probably other - things). - nsh: --- Configures the NuttShell (nsh) located at apps/examples/nsh. The diff --git a/configs/freedom-kl26z/minnsh/Make.defs b/configs/freedom-kl26z/minnsh/Make.defs deleted file mode 100644 index 380541961dc..00000000000 --- a/configs/freedom-kl26z/minnsh/Make.defs +++ /dev/null @@ -1,124 +0,0 @@ -############################################################################ -# configs/freedom-kl26z/minnsh/Make.defs -# -# Copyright (C) 2015 Gregory Nutt. All rights reserved. -# Author: Gregory Nutt -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in -# the documentation and/or other materials provided with the -# distribution. -# 3. Neither the name NuttX nor the names of its contributors may be -# used to endorse or promote products derived from this software -# without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE -# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, -# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, -# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS -# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED -# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN -# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -# POSSIBILITY OF SUCH DAMAGE. -# -############################################################################ - -include ${TOPDIR}/.config -include ${TOPDIR}/tools/Config.mk -include ${TOPDIR}/arch/arm/src/armv6-m/Toolchain.defs - -LDSCRIPT = ld.script - -ifeq ($(WINTOOL),y) - # Windows-native toolchains - ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" - ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}" - ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}" -else - # Linux/Cygwin-native toolchain - ARCHINCLUDES = -I. -isystem $(TOPDIR)/include - ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx - ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT) -endif - -CC = $(CROSSDEV)gcc -CXX = $(CROSSDEV)g++ -CPP = $(CROSSDEV)gcc -E -LD = $(CROSSDEV)ld -AR = $(ARCROSSDEV)ar rcs -NM = $(ARCROSSDEV)nm -OBJCOPY = $(CROSSDEV)objcopy -OBJDUMP = $(CROSSDEV)objdump - -ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'} -ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1} - -ifeq ($(CONFIG_DEBUG_SYMBOLS),y) - ARCHOPTIMIZATION = -g -endif - -ifneq ($(CONFIG_DEBUG_NOOPT),y) - ARCHOPTIMIZATION += $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer -endif - -ARCHCFLAGS = -fno-builtin -ARCHCXXFLAGS = -fno-builtin -fno-exceptions -fcheck-new -fno-rtti -ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow -Wundef -ARCHWARNINGSXX = -Wall -Wshadow -Wundef -ARCHDEFINES = -ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10 - -CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe -CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS) -CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe -CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS) -CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -AFLAGS = $(CFLAGS) -D__ASSEMBLY__ - -NXFLATLDFLAGS1 = -r -d -warn-common -NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat-pcrel.ld -no-check-sections -LDNXFLATFLAGS = -e main -s 2048 - -ASMEXT = .S -OBJEXT = .o -LIBEXT = .a -EXEEXT = - -ifneq ($(CROSSDEV),arm-nuttx-elf-) - LDFLAGS += -nostartfiles -nodefaultlibs -endif -ifeq ($(CONFIG_DEBUG_SYMBOLS),y) - LDFLAGS += -g -endif - - -HOSTCC = gcc -HOSTINCLUDES = -I. -HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -Wundef -g -pipe -HOSTLDFLAGS = -ifeq ($(CONFIG_HOST_WINDOWS),y) - HOSTEXEEXT = .exe -else - HOSTEXEEXT = -endif - -ifeq ($(WINTOOL),y) - # Windows-native host tools - DIRLINK = $(TOPDIR)/tools/copydir.sh - DIRUNLINK = $(TOPDIR)/tools/unlink.sh - MKDEP = $(TOPDIR)/tools/mkwindeps.sh -else - # Linux/Cygwin-native host tools - MKDEP = $(TOPDIR)/tools/mkdeps$(HOSTEXEEXT) -endif - diff --git a/configs/freedom-kl26z/minnsh/defconfig b/configs/freedom-kl26z/minnsh/defconfig deleted file mode 100644 index 480cd09801a..00000000000 --- a/configs/freedom-kl26z/minnsh/defconfig +++ /dev/null @@ -1,799 +0,0 @@ -# -# Automatically generated file; DO NOT EDIT. -# Nuttx/ Configuration -# - -# -# Build Setup -# -CONFIG_EXPERIMENTAL=y -CONFIG_DEFAULT_SMALL=y -CONFIG_HOST_LINUX=y -# CONFIG_HOST_OSX is not set -# CONFIG_HOST_WINDOWS is not set -# CONFIG_HOST_OTHER is not set - -# -# Build Configuration -# -# CONFIG_APPS_DIR="../apps" -CONFIG_BUILD_FLAT=y -# CONFIG_BUILD_2PASS is not set - -# -# Binary Output Formats -# -# CONFIG_RRLOAD_BINARY is not set -# CONFIG_INTELHEX_BINARY is not set -CONFIG_MOTOROLA_SREC=y -CONFIG_RAW_BINARY=y -# CONFIG_UBOOT_UIMAGE is not set - -# -# Customize Header Files -# -# CONFIG_ARCH_STDINT_H is not set -# CONFIG_ARCH_STDBOOL_H is not set -# CONFIG_ARCH_MATH_H is not set -# CONFIG_ARCH_FLOAT_H is not set -# CONFIG_ARCH_STDARG_H is not set -# CONFIG_ARCH_DEBUG_H is not set - -# -# Debug Options -# -# CONFIG_DEBUG_ALERT is not set -# CONFIG_DEBUG_FEATURES is not set -CONFIG_ARCH_HAVE_STACKCHECK=y -# CONFIG_STACK_COLORATION is not set -# CONFIG_ARCH_HAVE_HEAPCHECK is not set -# CONFIG_DEBUG_SYMBOLS is not set -CONFIG_ARCH_HAVE_CUSTOMOPT=y -# CONFIG_DEBUG_NOOPT is not set -# CONFIG_DEBUG_CUSTOMOPT is not set -CONFIG_DEBUG_FULLOPT=y - -# -# System Type -# -CONFIG_ARCH_ARM=y -# CONFIG_ARCH_AVR is not set -# CONFIG_ARCH_HC is not set -# CONFIG_ARCH_MIPS is not set -# CONFIG_ARCH_RENESAS is not set -# CONFIG_ARCH_SIM is not set -# CONFIG_ARCH_X86 is not set -# CONFIG_ARCH_Z16 is not set -# CONFIG_ARCH_Z80 is not set -CONFIG_ARCH="arm" - -# -# ARM Options -# -# CONFIG_ARCH_CHIP_A1X is not set -# CONFIG_ARCH_CHIP_C5471 is not set -# CONFIG_ARCH_CHIP_CALYPSO is not set -# CONFIG_ARCH_CHIP_DM320 is not set -# CONFIG_ARCH_CHIP_EFM32 is not set -# CONFIG_ARCH_CHIP_IMX1 is not set -# CONFIG_ARCH_CHIP_IMX6 is not set -# CONFIG_ARCH_CHIP_KINETIS is not set -CONFIG_ARCH_CHIP_KL=y -# CONFIG_ARCH_CHIP_LM is not set -# CONFIG_ARCH_CHIP_TIVA is not set -# CONFIG_ARCH_CHIP_LPC11XX is not set -# CONFIG_ARCH_CHIP_LPC17XX is not set -# CONFIG_ARCH_CHIP_LPC214X is not set -# CONFIG_ARCH_CHIP_LPC2378 is not set -# CONFIG_ARCH_CHIP_LPC31XX is not set -# CONFIG_ARCH_CHIP_LPC43XX is not set -# CONFIG_ARCH_CHIP_NUC1XX is not set -# CONFIG_ARCH_CHIP_SAMA5 is not set -# CONFIG_ARCH_CHIP_SAMD is not set -# CONFIG_ARCH_CHIP_SAML is not set -# CONFIG_ARCH_CHIP_SAM34 is not set -# CONFIG_ARCH_CHIP_SAMV7 is not set -# CONFIG_ARCH_CHIP_STM32 is not set -# CONFIG_ARCH_CHIP_STM32F7 is not set -# CONFIG_ARCH_CHIP_STM32L4 is not set -# CONFIG_ARCH_CHIP_STR71X is not set -# CONFIG_ARCH_CHIP_TMS570 is not set -# CONFIG_ARCH_CHIP_MOXART is not set -# CONFIG_ARCH_ARM7TDMI is not set -# CONFIG_ARCH_ARM926EJS is not set -# CONFIG_ARCH_ARM920T is not set -CONFIG_ARCH_CORTEXM0=y -# CONFIG_ARCH_CORTEXM3 is not set -# CONFIG_ARCH_CORTEXM4 is not set -# CONFIG_ARCH_CORTEXM7 is not set -# CONFIG_ARCH_CORTEXA5 is not set -# CONFIG_ARCH_CORTEXA8 is not set -# CONFIG_ARCH_CORTEXA9 is not set -# CONFIG_ARCH_CORTEXR4 is not set -# CONFIG_ARCH_CORTEXR4F is not set -# CONFIG_ARCH_CORTEXR5 is not set -# CONFIG_ARCH_CORTEX5F is not set -# CONFIG_ARCH_CORTEXR7 is not set -# CONFIG_ARCH_CORTEXR7F is not set -CONFIG_ARCH_FAMILY="armv6-m" -CONFIG_ARCH_CHIP="kl" -# CONFIG_ARM_TOOLCHAIN_IAR is not set -# CONFIG_ARM_TOOLCHAIN_GNU is not set -CONFIG_ARCH_HAVE_CMNVECTOR=y -# CONFIG_ARMV7M_CMNVECTOR is not set -# CONFIG_ARMV7M_LAZYFPU is not set -# CONFIG_ARCH_HAVE_FPU is not set -# CONFIG_ARCH_HAVE_DPFPU is not set -# CONFIG_ARCH_HAVE_TRUSTZONE is not set -# CONFIG_ARM_HAVE_MPU_UNIFIED is not set - -# -# ARMV6M Configuration Options -# -# CONFIG_ARMV6M_TOOLCHAIN_BUILDROOT is not set -# CONFIG_ARMV6M_TOOLCHAIN_CODEREDL is not set -# CONFIG_ARMV6M_TOOLCHAIN_CODESOURCERYL is not set -CONFIG_ARMV6M_TOOLCHAIN_GNU_EABIL=y -# CONFIG_KL_GPIOIRQ is not set - -# -# Kinetis Configuration Options -# -# CONFIG_ARCH_CHIP_MKL25Z64 is not set -# CONFIG_ARCH_CHIP_MKL25Z128 is not set -CONFIG_ARCH_CHIP_MKL26Z128=y -CONFIG_ARCH_FAMILY_KL2X=y - -# -# Kinetis Peripheral Support -# -# CONFIG_KL_TRACE is not set -# CONFIG_KL_FLEXBUS is not set -CONFIG_KL_UART0=y -# CONFIG_KL_UART1 is not set -# CONFIG_KL_UART2 is not set -# CONFIG_KL_FLEXCAN0 is not set -# CONFIG_KL_FLEXCAN1 is not set -CONFIG_KL_SPI0=y -CONFIG_KL_SPI1=y -# CONFIG_KL_SPI2 is not set -# CONFIG_KL_I2C0 is not set -# CONFIG_KL_I2C1 is not set -# CONFIG_KL_I2S is not set -# CONFIG_KL_DAC0 is not set -# CONFIG_KL_DAC1 is not set -# CONFIG_KL_ADC0 is not set -# CONFIG_KL_ADC1 is not set -# CONFIG_KL_CMP is not set -# CONFIG_KL_VREF is not set -# CONFIG_KL_TPM0 is not set -# CONFIG_KL_TPM1 is not set -# CONFIG_KL_TPM2 is not set -# CONFIG_KL_LPTIMER is not set -# CONFIG_KL_RTC is not set -# CONFIG_KL_EWM is not set -# CONFIG_KL_CMT is not set -# CONFIG_KL_USBOTG is not set -# CONFIG_KL_USBDCD is not set -# CONFIG_KL_LLWU is not set -# CONFIG_KL_TSI is not set -# CONFIG_KL_FTFL is not set -# CONFIG_KL_DMA is not set -# CONFIG_KL_CRC is not set -# CONFIG_KL_PDB is not set -# CONFIG_KL_PIT is not set -CONFIG_KL_SYSTICK_CORECLK=y -# CONFIG_KL_SYSTICK_CORECLK_DIV16 is not set - -# -# Kinetis GPIO Interrupt Configuration -# - -# -# Architecture Options -# -# CONFIG_ARCH_NOINTC is not set -# CONFIG_ARCH_VECNOTIRQ is not set -# CONFIG_ARCH_DMA is not set -CONFIG_ARCH_HAVE_IRQPRIO=y -# CONFIG_ARCH_L2CACHE is not set -# CONFIG_ARCH_HAVE_COHERENT_DCACHE is not set -# CONFIG_ARCH_HAVE_ADDRENV is not set -# CONFIG_ARCH_NEED_ADDRENV_MAPPING is not set -# CONFIG_ARCH_HAVE_MULTICPU is not set -CONFIG_ARCH_HAVE_VFORK=y -# CONFIG_ARCH_HAVE_MMU is not set -# CONFIG_ARCH_HAVE_MPU is not set -# CONFIG_ARCH_NAND_HWECC is not set -# CONFIG_ARCH_HAVE_EXTCLK is not set -# CONFIG_ARCH_HAVE_POWEROFF is not set -CONFIG_ARCH_HAVE_RESET=y -# CONFIG_ARCH_IRQPRIO is not set -# CONFIG_ARCH_STACKDUMP is not set -# CONFIG_ENDIAN_BIG is not set -# CONFIG_ARCH_IDLE_CUSTOM is not set -# CONFIG_ARCH_HAVE_RAMFUNCS is not set -# CONFIG_ARCH_HAVE_RAMVECTORS is not set - -# -# Board Settings -# -CONFIG_BOARD_LOOPSPERMSEC=2988 -# CONFIG_ARCH_CALIBRATION is not set - -# -# Interrupt options -# -CONFIG_ARCH_HAVE_INTERRUPTSTACK=y -CONFIG_ARCH_INTERRUPTSTACK=0 -# CONFIG_ARCH_HAVE_HIPRI_INTERRUPT is not set - -# -# Boot options -# -# CONFIG_BOOT_RUNFROMEXTSRAM is not set -CONFIG_BOOT_RUNFROMFLASH=y -# CONFIG_BOOT_RUNFROMISRAM is not set -# CONFIG_BOOT_RUNFROMSDRAM is not set -# CONFIG_BOOT_COPYTORAM is not set - -# -# Boot Memory Configuration -# -CONFIG_RAM_START=0x1FFFF000 -CONFIG_RAM_SIZE=16384 -# CONFIG_ARCH_HAVE_SDRAM is not set - -# -# Board Selection -# -CONFIG_ARCH_BOARD_FREEDOM_KL26Z=y -# CONFIG_ARCH_BOARD_CUSTOM is not set -CONFIG_ARCH_BOARD="freedom-kl26z" - -# -# Common Board Options -# -CONFIG_ARCH_HAVE_LEDS=y -CONFIG_ARCH_LEDS=y -CONFIG_NSH_MMCSDMINOR=0 - -# -# Board-Specific Options -# -# CONFIG_LIB_BOARDCTL is not set - -# -# RTOS Features -# -CONFIG_DISABLE_OS_API=y -CONFIG_DISABLE_POSIX_TIMERS=y -CONFIG_DISABLE_PTHREAD=y -CONFIG_DISABLE_SIGNALS=y -CONFIG_DISABLE_MQUEUE=y -CONFIG_DISABLE_ENVIRON=y - -# -# Clocks and Timers -# -CONFIG_USEC_PER_TICK=10000 -# CONFIG_SYSTEM_TIME64 is not set -# CONFIG_CLOCK_MONOTONIC is not set -# CONFIG_JULIAN_TIME is not set -CONFIG_START_YEAR=2013 -CONFIG_START_MONTH=2 -CONFIG_START_DAY=26 -CONFIG_MAX_WDOGPARMS=2 -CONFIG_PREALLOC_WDOGS=4 -CONFIG_WDOG_INTRESERVE=0 -CONFIG_PREALLOC_TIMERS=0 - -# -# Tasks and Scheduling -# -# CONFIG_SPINLOCK is not set -# CONFIG_INIT_NONE is not set -CONFIG_INIT_ENTRYPOINT=y -# CONFIG_INIT_FILEPATH is not set -CONFIG_USER_ENTRYPOINT="nsh_main" -CONFIG_RR_INTERVAL=0 -# CONFIG_SCHED_SPORADIC is not set -CONFIG_TASK_NAME_SIZE=0 -CONFIG_MAX_TASKS=8 -# CONFIG_SCHED_HAVE_PARENT is not set -# CONFIG_SCHED_WAITPID is not set - -# -# Performance Monitoring -# -# CONFIG_SCHED_CPULOAD is not set -# CONFIG_SCHED_INSTRUMENTATION is not set - -# -# Files and I/O -# -# CONFIG_DEV_CONSOLE is not set -CONFIG_FDCLONE_DISABLE=y -# CONFIG_FDCLONE_STDIO is not set -CONFIG_SDCLONE_DISABLE=y -CONFIG_NFILE_DESCRIPTORS=0 -CONFIG_NFILE_STREAMS=0 -CONFIG_NAME_MAX=32 -# CONFIG_PRIORITY_INHERITANCE is not set - -# -# RTOS hooks -# -# CONFIG_BOARD_INITIALIZE is not set -# CONFIG_SCHED_STARTHOOK is not set -# CONFIG_SCHED_ATEXIT is not set -# CONFIG_SCHED_ONEXIT is not set -# CONFIG_MODULE is not set - -# -# Work queue support -# - -# -# Stack and heap information -# -CONFIG_IDLETHREAD_STACKSIZE=1024 -CONFIG_USERMAIN_STACKSIZE=1536 -CONFIG_PTHREAD_STACK_MIN=256 -CONFIG_PTHREAD_STACK_DEFAULT=1536 -# CONFIG_LIB_SYSCALL is not set - -# -# Device Drivers -# -CONFIG_DISABLE_POLL=y -# CONFIG_DEV_NULL is not set -# CONFIG_DEV_ZERO is not set -# CONFIG_DEV_LOOP is not set - -# -# Buffering -# -# CONFIG_DRVR_WRITEBUFFER is not set -# CONFIG_DRVR_READAHEAD is not set -# CONFIG_RAMDISK is not set -# CONFIG_CAN is not set -# CONFIG_ARCH_HAVE_PWM_PULSECOUNT is not set -# CONFIG_ARCH_HAVE_PWM_MULTICHAN is not set -# CONFIG_PWM is not set -# CONFIG_ARCH_HAVE_I2CRESET is not set -# CONFIG_I2C is not set -CONFIG_SPI=y -# CONFIG_SPI_SLAVE is not set -CONFIG_SPI_EXCHANGE=y -# CONFIG_SPI_CMDDATA is not set -# CONFIG_SPI_CALLBACK is not set -# CONFIG_SPI_BITBANG is not set -# CONFIG_SPI_HWFEATURES is not set -# CONFIG_SPI_CRCGENERATION is not set -# CONFIG_SPI_CS_CONTROL is not set -# CONFIG_SPI_CS_DELAY_CONTROL is not set -# CONFIG_I2S is not set - -# -# Timer Driver Support -# -# CONFIG_TIMER is not set -# CONFIG_RTC is not set -# CONFIG_WATCHDOG is not set -# CONFIG_ANALOG is not set -# CONFIG_AUDIO_DEVICES is not set -# CONFIG_VIDEO_DEVICES is not set -# CONFIG_BCH is not set -# CONFIG_INPUT is not set -# CONFIG_IOEXPANDER is not set - -# -# LCD Driver Support -# -# CONFIG_LCD is not set -# CONFIG_SLCD is not set - -# -# LED Support -# -# CONFIG_USERLED is not set -# CONFIG_RGBLED is not set -# CONFIG_PCA9635PW is not set -# CONFIG_NCP5623C is not set -# CONFIG_MMCSD is not set -# CONFIG_MODEM is not set -# CONFIG_MTD is not set -# CONFIG_EEPROM is not set -# CONFIG_PIPES is not set -# CONFIG_PM is not set -# CONFIG_POWER is not set -# CONFIG_SENSORS is not set -# CONFIG_SERCOMM_CONSOLE is not set -CONFIG_SERIAL=y -# CONFIG_SERIAL_REMOVABLE is not set -CONFIG_SERIAL_CONSOLE=y -# CONFIG_16550_UART is not set -# CONFIG_UART_SERIALDRIVER is not set -CONFIG_UART0_SERIALDRIVER=y -# CONFIG_UART1_SERIALDRIVER is not set -# CONFIG_UART2_SERIALDRIVER is not set -# CONFIG_UART3_SERIALDRIVER is not set -# CONFIG_UART4_SERIALDRIVER is not set -# CONFIG_UART5_SERIALDRIVER is not set -# CONFIG_UART6_SERIALDRIVER is not set -# CONFIG_UART7_SERIALDRIVER is not set -# CONFIG_UART8_SERIALDRIVER is not set -# CONFIG_SCI0_SERIALDRIVER is not set -# CONFIG_SCI1_SERIALDRIVER is not set -# CONFIG_USART0_SERIALDRIVER is not set -# CONFIG_USART1_SERIALDRIVER is not set -# CONFIG_USART2_SERIALDRIVER is not set -# CONFIG_USART3_SERIALDRIVER is not set -# CONFIG_USART4_SERIALDRIVER is not set -# CONFIG_USART5_SERIALDRIVER is not set -# CONFIG_USART6_SERIALDRIVER is not set -# CONFIG_USART7_SERIALDRIVER is not set -# CONFIG_USART8_SERIALDRIVER is not set -# CONFIG_OTHER_UART_SERIALDRIVER is not set -CONFIG_MCU_SERIAL=y -# CONFIG_STANDARD_SERIAL is not set -# CONFIG_SERIAL_IFLOWCONTROL is not set -# CONFIG_SERIAL_OFLOWCONTROL is not set -# CONFIG_SERIAL_DMA is not set -# CONFIG_ARCH_HAVE_SERIAL_TERMIOS is not set -CONFIG_UART0_SERIAL_CONSOLE=y -# CONFIG_OTHER_SERIAL_CONSOLE is not set -# CONFIG_NO_SERIAL_CONSOLE is not set - -# -# UART0 Configuration -# -CONFIG_UART0_RXBUFSIZE=256 -CONFIG_UART0_TXBUFSIZE=256 -CONFIG_UART0_BAUD=115200 -CONFIG_UART0_BITS=8 -CONFIG_UART0_PARITY=0 -CONFIG_UART0_2STOP=0 -# CONFIG_UART0_IFLOWCONTROL is not set -# CONFIG_UART0_OFLOWCONTROL is not set -# CONFIG_UART0_DMA is not set -# CONFIG_USBDEV is not set -# CONFIG_USBHOST is not set -# CONFIG_DRIVERS_WIRELESS is not set - -# -# System Logging -# -# CONFIG_ARCH_SYSLOG is not set -# CONFIG_RAMLOG is not set -# CONFIG_SYSLOG_INTBUFFER is not set -# CONFIG_SYSLOG_TIMESTAMP is not set -# CONFIG_SYSLOG_SERIAL_CONSOLE is not set -# CONFIG_SYSLOG_CHAR is not set -CONFIG_SYSLOG_NONE=y -# CONFIG_SYSLOG_FILE is not set - -# -# Networking Support -# -# CONFIG_ARCH_HAVE_NET is not set -# CONFIG_ARCH_HAVE_PHY is not set -# CONFIG_NET is not set - -# -# Crypto API -# -# CONFIG_CRYPTO is not set - -# -# File Systems -# - -# -# File system configuration -# -CONFIG_DISABLE_MOUNTPOINT=y -CONFIG_DISABLE_PSEUDOFS_OPERATIONS=y -# CONFIG_FS_READABLE is not set -# CONFIG_FS_WRITABLE is not set -# CONFIG_FS_NAMED_SEMAPHORES is not set -# CONFIG_FS_RAMMAP is not set -# CONFIG_FS_PROCFS is not set -# CONFIG_FS_UNIONFS is not set - -# -# Graphics Support -# -# CONFIG_NX is not set - -# -# Memory Management -# -CONFIG_MM_SMALL=y -CONFIG_MM_REGIONS=1 -# CONFIG_ARCH_HAVE_HEAP2 is not set -# CONFIG_GRAN is not set - -# -# Audio Support -# -# CONFIG_AUDIO is not set - -# -# Wireless Support -# -# CONFIG_WIRELESS is not set - -# -# Binary Loader -# -# CONFIG_BINFMT_DISABLE is not set -# CONFIG_NXFLAT is not set -# CONFIG_ELF is not set -# CONFIG_BUILTIN is not set -# CONFIG_PIC is not set -# CONFIG_SYMTAB_ORDEREDBYNAME is not set - -# -# Library Routines -# - -# -# Standard C Library Options -# -CONFIG_STDIO_BUFFER_SIZE=0 -CONFIG_STDIO_LINEBUFFER=y -CONFIG_NUNGET_CHARS=0 -# CONFIG_LIBM is not set -CONFIG_NOPRINTF_FIELDWIDTH=y -# CONFIG_LIBC_FLOATINGPOINT is not set -# CONFIG_LIBC_LONG_LONG is not set -# CONFIG_LIBC_IOCTL_VARIADIC is not set -CONFIG_LIB_RAND_ORDER=1 -# CONFIG_EOL_IS_CR is not set -# CONFIG_EOL_IS_LF is not set -# CONFIG_EOL_IS_BOTH_CRLF is not set -CONFIG_EOL_IS_EITHER_CRLF=y -# CONFIG_LIBC_EXECFUNCS is not set -CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=1024 -CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=1536 -# CONFIG_LIBC_STRERROR is not set -# CONFIG_LIBC_PERROR_STDOUT is not set -CONFIG_ARCH_LOWPUTC=y -# CONFIG_TIME_EXTENDED is not set -CONFIG_LIB_SENDFILE_BUFSIZE=512 -# CONFIG_ARCH_ROMGETC is not set -# CONFIG_ARCH_OPTIMIZED_FUNCTIONS is not set -CONFIG_ARCH_HAVE_TLS=y -# CONFIG_TLS is not set -# CONFIG_LIBC_NETDB is not set - -# -# Non-standard Library Support -# -# CONFIG_LIB_CRC64_FAST is not set -# CONFIG_LIB_KBDCODEC is not set -# CONFIG_LIB_SLCDCODEC is not set - -# -# Basic CXX Support -# -# CONFIG_C99_BOOL8 is not set -# CONFIG_HAVE_CXX is not set - -# -# Application Configuration -# - -# -# CAN Utilities -# - -# -# Examples -# -# CONFIG_EXAMPLES_CHAT is not set -# CONFIG_EXAMPLES_CONFIGDATA is not set -# CONFIG_EXAMPLES_CPUHOG is not set -# CONFIG_EXAMPLES_DHCPD is not set -# CONFIG_EXAMPLES_ELF is not set -# CONFIG_EXAMPLES_FTPC is not set -# CONFIG_EXAMPLES_FTPD is not set -# CONFIG_EXAMPLES_HELLO is not set -# CONFIG_EXAMPLES_HIDKBD is not set -# CONFIG_EXAMPLES_IGMP is not set -# CONFIG_EXAMPLES_JSON is not set -# CONFIG_EXAMPLES_KEYPADTEST is not set -# CONFIG_EXAMPLES_MEDIA is not set -# CONFIG_EXAMPLES_MM is not set -# CONFIG_EXAMPLES_MODBUS is not set -# CONFIG_EXAMPLES_MOUNT is not set -# CONFIG_EXAMPLES_NRF24L01TERM is not set -CONFIG_EXAMPLES_NSH=y -# CONFIG_EXAMPLES_NULL is not set -# CONFIG_EXAMPLES_NX is not set -# CONFIG_EXAMPLES_NXFFS is not set -# CONFIG_EXAMPLES_NXHELLO is not set -# CONFIG_EXAMPLES_NXIMAGE is not set -# CONFIG_EXAMPLES_NXLINES is not set -# CONFIG_EXAMPLES_NXTERM is not set -# CONFIG_EXAMPLES_NXTEXT is not set -# CONFIG_EXAMPLES_OSTEST is not set -# CONFIG_EXAMPLES_PCA9635 is not set -# CONFIG_EXAMPLES_PIPE is not set -# CONFIG_EXAMPLES_POLL is not set -# CONFIG_EXAMPLES_POSIXSPAWN is not set -# CONFIG_EXAMPLES_PPPD is not set -# CONFIG_EXAMPLES_RGBLED is not set -# CONFIG_EXAMPLES_SENDMAIL is not set -# CONFIG_EXAMPLES_SERIALBLASTER is not set -# CONFIG_EXAMPLES_SERIALRX is not set -# CONFIG_EXAMPLES_SERLOOP is not set -# CONFIG_EXAMPLES_SLCD is not set -# CONFIG_EXAMPLES_SMART is not set -# CONFIG_EXAMPLES_SMP is not set -# CONFIG_EXAMPLES_TCPECHO is not set -# CONFIG_EXAMPLES_TELNETD is not set -# CONFIG_EXAMPLES_TIFF is not set -# CONFIG_EXAMPLES_TOUCHSCREEN is not set -# CONFIG_EXAMPLES_USBTERM is not set -# CONFIG_EXAMPLES_WATCHDOG is not set -# CONFIG_EXAMPLES_WEBSERVER is not set - -# -# File System Utilities -# -# CONFIG_FSUTILS_INIFILE is not set - -# -# GPS Utilities -# -# CONFIG_GPSUTILS_MINMEA_LIB is not set - -# -# Graphics Support -# -# CONFIG_TIFF is not set -# CONFIG_GRAPHICS_TRAVELER is not set - -# -# Interpreters -# -# CONFIG_INTERPRETERS_FICL is not set -# CONFIG_INTERPRETERS_MICROPYTHON is not set -# CONFIG_INTERPRETERS_PCODE is not set - -# -# FreeModBus -# -# CONFIG_MODBUS is not set - -# -# Network Utilities -# -# CONFIG_NETUTILS_CODECS is not set -# CONFIG_NETUTILS_ESP8266 is not set -# CONFIG_NETUTILS_FTPC is not set -# CONFIG_NETUTILS_JSON is not set -# CONFIG_NETUTILS_SMTP is not set - -# -# NSH Library -# -CONFIG_NSH_LIBRARY=y -# CONFIG_NSH_MOTD is not set - -# -# Command Line Configuration -# -CONFIG_NSH_READLINE=y -# CONFIG_NSH_CLE is not set -CONFIG_NSH_LINELEN=80 -CONFIG_NSH_DISABLE_SEMICOLON=y -CONFIG_NSH_MAXARGUMENTS=6 -# CONFIG_NSH_ARGCAT is not set -CONFIG_NSH_NESTDEPTH=3 -# CONFIG_NSH_DISABLEBG is not set - -# -# Disable Individual commands -# -CONFIG_NSH_DISABLE_ADDROUTE=y -CONFIG_NSH_DISABLE_BASENAME=y -# CONFIG_NSH_DISABLE_CAT is not set -CONFIG_NSH_DISABLE_CD=y -CONFIG_NSH_DISABLE_CP=y -# CONFIG_NSH_DISABLE_CMP is not set -CONFIG_NSH_DISABLE_DATE=y -CONFIG_NSH_DISABLE_DD=y -CONFIG_NSH_DISABLE_DF=y -CONFIG_NSH_DISABLE_DELROUTE=y -CONFIG_NSH_DISABLE_DIRNAME=y -# CONFIG_NSH_DISABLE_ECHO is not set -# CONFIG_NSH_DISABLE_EXEC is not set -# CONFIG_NSH_DISABLE_EXIT is not set -# CONFIG_NSH_DISABLE_FREE is not set -CONFIG_NSH_DISABLE_GET=y -# CONFIG_NSH_DISABLE_HELP is not set -# CONFIG_NSH_DISABLE_HEXDUMP is not set -CONFIG_NSH_DISABLE_IFCONFIG=y -CONFIG_NSH_DISABLE_IFUPDOWN=y -# CONFIG_NSH_DISABLE_KILL is not set -CONFIG_NSH_DISABLE_LOSETUP=y -CONFIG_NSH_DISABLE_LOSMART=y -# CONFIG_NSH_DISABLE_LS is not set -# CONFIG_NSH_DISABLE_MB is not set -CONFIG_NSH_DISABLE_MKDIR=y -# CONFIG_NSH_DISABLE_MKFIFO is not set -CONFIG_NSH_DISABLE_MKRD=y -# CONFIG_NSH_DISABLE_MH is not set -CONFIG_NSH_DISABLE_MOUNT=y -# CONFIG_NSH_DISABLE_MV is not set -# CONFIG_NSH_DISABLE_MW is not set -# CONFIG_NSH_DISABLE_PS is not set -CONFIG_NSH_DISABLE_PUT=y -# CONFIG_NSH_DISABLE_PWD is not set -CONFIG_NSH_DISABLE_RM=y -CONFIG_NSH_DISABLE_RMDIR=y -# CONFIG_NSH_DISABLE_SET is not set -# CONFIG_NSH_DISABLE_SH is not set -# CONFIG_NSH_DISABLE_SLEEP is not set -CONFIG_NSH_DISABLE_TIME=y -# CONFIG_NSH_DISABLE_TEST is not set -CONFIG_NSH_DISABLE_UMOUNT=y -CONFIG_NSH_DISABLE_UNAME=y -# CONFIG_NSH_DISABLE_UNSET is not set -# CONFIG_NSH_DISABLE_USLEEP is not set -CONFIG_NSH_DISABLE_WGET=y -# CONFIG_NSH_DISABLE_XD is not set - -# -# Configure Command Options -# -CONFIG_NSH_CODECS_BUFSIZE=128 -# CONFIG_NSH_CMDOPT_HEXDUMP is not set -CONFIG_NSH_FILEIOSIZE=64 - -# -# Scripting Support -# -CONFIG_NSH_DISABLESCRIPT=y - -# -# Console Configuration -# -CONFIG_NSH_CONSOLE=y -# CONFIG_NSH_ALTCONDEV is not set -# CONFIG_NSH_ARCHINIT is not set -# CONFIG_NSH_LOGIN is not set -# CONFIG_NSH_CONSOLE_LOGIN is not set - -# -# NxWidgets/NxWM -# - -# -# Platform-specific Support -# -# CONFIG_PLATFORM_CONFIGDATA is not set - -# -# System Libraries and NSH Add-Ons -# -# CONFIG_SYSTEM_CLE is not set -# CONFIG_SYSTEM_CUTERM is not set -# CONFIG_SYSTEM_FREE is not set -# CONFIG_LIB_HEX2BIN is not set -# CONFIG_SYSTEM_HEXED is not set -# CONFIG_SYSTEM_INSTALL is not set -# CONFIG_SYSTEM_RAMTEST is not set -CONFIG_READLINE_HAVE_EXTMATCH=y -CONFIG_SYSTEM_READLINE=y -CONFIG_READLINE_ECHO=y -# CONFIG_READLINE_TABCOMPLETION is not set -# CONFIG_READLINE_CMD_HISTORY is not set -# CONFIG_SYSTEM_SUDOKU is not set -# CONFIG_SYSTEM_UBLOXMODEM is not set -# CONFIG_SYSTEM_VI is not set -# CONFIG_SYSTEM_ZMODEM is not set diff --git a/configs/freedom-kl26z/minnsh/setenv.sh b/configs/freedom-kl26z/minnsh/setenv.sh deleted file mode 100755 index 755c02b4b6b..00000000000 --- a/configs/freedom-kl26z/minnsh/setenv.sh +++ /dev/null @@ -1,71 +0,0 @@ -#!/bin/bash -# configs/freedom-kl26z/minnsh/setenv.sh -# -# Copyright (C) 2015 Gregory Nutt. All rights reserved. -# Author: Gregory Nutt -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in -# the documentation and/or other materials provided with the -# distribution. -# 3. Neither the name NuttX nor the names of its contributors may be -# used to endorse or promote products derived from this software -# without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE -# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, -# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, -# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS -# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED -# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN -# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -# POSSIBILITY OF SUCH DAMAGE. -# - -if [ "$_" = "$0" ] ; then - echo "You must source this script, not run it!" 1>&2 - exit 1 -fi - -WD=`pwd` -if [ ! -x "setenv.sh" ]; then - echo "This script must be executed from the top-level NuttX build directory" - exit 1 -fi - -if [ -z "${PATH_ORIG}" ]; then - export PATH_ORIG="${PATH}" -fi - -# This is the Cygwin path to the location where I installed the CodeSourcery -# toolchain under windows. You will also have to edit this if you install -# the CodeSourcery toolchain in any other location -#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin" -#export TOOLCHAIN_BIN="/cygdrive/c/Users/MyName/MentorGraphics/Sourcery_CodeBench_Lite_for_ARM_EABI/bin" - -# These are the Cygwin paths to the locations where I installed the Atollic -# toolchain under windows. You will also have to edit this if you install -# the Atollic toolchain in any other location. /usr/bin is added before -# the Atollic bin path because there is are binaries named gcc.exe and g++.exe -# at those locations as well. -#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for ARM Pro 2.3.0/ARMTools/bin" -#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for STMicroelectronics STM32 Lite 2.3.0/ARMTools/bin" - -# This is the Cygwin path to the location where I build the buildroot -# toolchain. -export TOOLCHAIN_BIN="${WD}/../buildroot/build_arm_nofpu/staging_dir/bin" - -# Add the path to the toolchain to the PATH varialble -export PATH="${TOOLCHAIN_BIN}:/sbin:/usr/sbin:${PATH_ORIG}" - -echo "PATH : ${PATH}" diff --git a/configs/lpcxpresso-lpc1115/README.txt b/configs/lpcxpresso-lpc1115/README.txt index bfe29dc6d50..168bed5198d 100644 --- a/configs/lpcxpresso-lpc1115/README.txt +++ b/configs/lpcxpresso-lpc1115/README.txt @@ -680,144 +680,6 @@ selected as follow: Where is one of the following: - minnsh: - ------ - - This is a experiment to see just how small we can get a usable NSH - configuration. This configuration has far fewer features than the nsh - configuration but is also a fraction of the size. - - This minnsh configuration is a "proof-of-concept" and not very usable in - its current state. This configuration was created by disabling - everything possible INCLUDING file system support. Without file system - support, NuttX is pretty much crippled. Here are some of the - consequences of disabling the file system: - - - All features that depend on the file system are lost: device drivers, - mountpoints, message queues, named semaphores. - - - Without device drivers, you cannot interact with the RTOS using POSIX - interfaces. You would have to work with NuttX as with those other - tiny RTOSs: As a scheduler and a callable hardare abstraction layer - (HAL). - - - You cannot use any of the NuttX upper half device drivers since they - depend on the pseudo-file system and device nodes. You can, of - course, continue to use the lower half drivers either directly. Or, - perhaps, you could write some custom minnsh upper half drivers that - do not depend on a file system and expose a HAL interface. - - There is a special version of readline() the NSH uses when there is no - file system. It uses a special up_putc() to write data to the console - and a special function up_getc() to read data from the console. - - - The current up_getc() implementationsa are a kludge. They are - analogous to the up_putc() implementations: They directly poll the - hardware for serial availability, locking up all lower priority tasks - in the entire system while they poll. So a version of NSH that uses - up_getc() essentially blocks the system until a character is received. - - This, of course, could be fixed by creating a special, upper half - implementation of the interrupt-driven serial lower half (like - stm32_serial) that just supports single character console I/O - (perhaps called up_putc and up_getc?). The NSH could wait for serial - input without blocking the system. But then that would increase the - footprint too. - - So although the minnsh configurations are a good starting point for - making things small, they not are really very practical. Why might - you want a NuttX minnsh solution? Perhaps you have software that runs - on a family of chips including some very tiny MCUs. Then perhaps having - the RTOS compatibility would justify the loss of functionality? - - You can re-enable the file system and (true) serial console with - these settings: - - Enable the file system: - CONFIG_NFILE_DESCRIPTORS=5 - CONFIG_NFILE_STREAMS=5 - - Enable the console device: - CONFIG_DEV_CONSOLE=y - - Disable most new NSH commands. Some like 'ls' are really mandatory - with a file system: - CONFIG_NSH_DISABLE_xxx=y - - Enable the upper half serial driver: - CONFIG_SERIAL=y - CONFIG_STANDARD_SERIAL=y - - Enable the USART1 serial driver: - CONFIG_STM32_USART1=y - CONFIG_STM32_USART1_SERIALDRIVER=y - CONFIG_USART1_SERIAL_CONSOLE=y - - CONFIG_USART1_2STOP=0 - CONFIG_USART1_BAUD=115200 - CONFIG_USART1_BITS=8 - CONFIG_USART1_PARITY=0 - CONFIG_USART1_RXBUFSIZE=16 - CONFIG_USART1_TXBUFSIZE=16 - - With these changes, NSH should behave better and we preserve the device - driver interface. But this result in a total size increase of about - 7KB: That is about 5KB of additional OS support for the file system and - serial console PLUS about 2KB for the 'ls' command logic (including OS - support for opendir(), readdir(), closedir(), stat(), and probably other - things). - - STATUS: - 2015-6-10 - The nuttx.bin minnsh firmware file size: - - $ ls -l nuttx.bin - -rwxr-xr-x 1 alan alan 13859 Jun 10 08:54 nuttx.bin - - $ arm-none-eabi-size nuttx - text data bss dec hex filename - 12818 193 704 13715 3593 nuttx - - This is serial console output (and input) : - - NuttShell (NSH) - nsh> ls /dev - nsh: ls: command not found - - No filesystem, no "ls" command :-) - - nsh> ? - help usage: help [-v] [] - - ? exec free mb mw xd - echo exit help mh ps - nsh> free - total used free largest - Mem: 6464 1816 4648 4648 - - nsh> echo "NuttX is magic!" - NuttX is magic! - nsh> - - Replace NSH with apps/examples/hello: - - $ ls -l nuttx.bin - -rwxr-xr-x 1 alan alan 9318 Jun 10 09:02 nuttx.bin - - $ arm-none-eabi-size nuttx - text data bss dec hex filename - 8277 193 704 9174 23d6 nuttx - - Some additional commits from Alan reduce this FLASH size by - about another kilobyte. That changes: (1) disable stack - dumping on assertions,and (2) make some FLASH data structures - smaller. - - Almost 2Kb of the remaining size was due to some arithmetic - "long long" (64 bits) operations drawn from libgcc.a. - Alan changed vsprintf to make "long long" support optional. - This change reduced the NuttX kernel to less than 8KiB! - nsh: --- diff --git a/configs/lpcxpresso-lpc1115/minnsh/Make.defs b/configs/lpcxpresso-lpc1115/minnsh/Make.defs deleted file mode 100644 index 5024dbe9ca5..00000000000 --- a/configs/lpcxpresso-lpc1115/minnsh/Make.defs +++ /dev/null @@ -1,123 +0,0 @@ -############################################################################ -# configs/lpcxpresso-lpc1115/minnsh/Make.defs -# -# Copyright (C) 2015 Gregory Nutt. All rights reserved. -# Author: Gregory Nutt -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in -# the documentation and/or other materials provided with the -# distribution. -# 3. Neither the name NuttX nor the names of its contributors may be -# used to endorse or promote products derived from this software -# without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE -# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, -# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, -# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS -# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED -# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN -# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -# POSSIBILITY OF SUCH DAMAGE. -# -############################################################################ - -include ${TOPDIR}/.config -include ${TOPDIR}/tools/Config.mk -include ${TOPDIR}/arch/arm/src/armv6-m/Toolchain.defs - -LDSCRIPT = ld.script - -ifeq ($(WINTOOL),y) - # Windows-native toolchains - ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" - ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}" - ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}" -else - # Linux/Cygwin-native toolchain - ARCHINCLUDES = -I. -isystem $(TOPDIR)/include - ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx - ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT) -endif - -CC = $(CROSSDEV)gcc -CXX = $(CROSSDEV)g++ -CPP = $(CROSSDEV)gcc -E -LD = $(CROSSDEV)ld -AR = $(ARCROSSDEV)ar rcs -NM = $(ARCROSSDEV)nm -OBJCOPY = $(CROSSDEV)objcopy -OBJDUMP = $(CROSSDEV)objdump - -ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'} -ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1} - -ifeq ($(CONFIG_DEBUG_SYMBOLS),y) - ARCHOPTIMIZATION = -g -endif - -ifneq ($(CONFIG_DEBUG_NOOPT),y) - ARCHOPTIMIZATION += $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer -endif - -ARCHCFLAGS = -fno-builtin -ARCHCXXFLAGS = -fno-builtin -fno-exceptions -fcheck-new -fno-rtti -ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow -Wundef -ARCHWARNINGSXX = -Wall -Wshadow -Wundef -ARCHDEFINES = -ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10 - -CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe -CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS) -CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe -CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS) -CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -AFLAGS = $(CFLAGS) -D__ASSEMBLY__ - -NXFLATLDFLAGS1 = -r -d -warn-common -NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat-pcrel.ld -no-check-sections -LDNXFLATFLAGS = -e main -s 2048 - -ASMEXT = .S -OBJEXT = .o -LIBEXT = .a -EXEEXT = - -ifneq ($(CROSSDEV),arm-nuttx-elf-) - LDFLAGS += -nostartfiles -nodefaultlibs -endif -ifeq ($(CONFIG_DEBUG_SYMBOLS),y) - LDFLAGS += -g -endif - - -HOSTCC = gcc -HOSTINCLUDES = -I. -HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -Wundef -g -pipe -HOSTLDFLAGS = -ifeq ($(CONFIG_HOST_WINDOWS),y) - HOSTEXEEXT = .exe -else - HOSTEXEEXT = -endif - -ifeq ($(WINTOOL),y) - # Windows-native host tools - DIRLINK = $(TOPDIR)/tools/copydir.sh - DIRUNLINK = $(TOPDIR)/tools/unlink.sh - MKDEP = $(TOPDIR)/tools/mkwindeps.sh -else - # Linux/Cygwin-native host tools - MKDEP = $(TOPDIR)/tools/mkdeps$(HOSTEXEEXT) -endif diff --git a/configs/lpcxpresso-lpc1115/minnsh/defconfig b/configs/lpcxpresso-lpc1115/minnsh/defconfig deleted file mode 100644 index 8480de14cb3..00000000000 --- a/configs/lpcxpresso-lpc1115/minnsh/defconfig +++ /dev/null @@ -1,767 +0,0 @@ -# -# Automatically generated file; DO NOT EDIT. -# Nuttx/ Configuration -# - -# -# Build Setup -# -# CONFIG_EXPERIMENTAL is not set -CONFIG_DEFAULT_SMALL=y -CONFIG_HOST_LINUX=y -# CONFIG_HOST_OSX is not set -# CONFIG_HOST_WINDOWS is not set -# CONFIG_HOST_OTHER is not set - -# -# Build Configuration -# -# CONFIG_APPS_DIR="../apps" -CONFIG_BUILD_FLAT=y -# CONFIG_BUILD_2PASS is not set - -# -# Binary Output Formats -# -# CONFIG_RRLOAD_BINARY is not set -# CONFIG_INTELHEX_BINARY is not set -# CONFIG_MOTOROLA_SREC is not set -CONFIG_RAW_BINARY=y -# CONFIG_UBOOT_UIMAGE is not set - -# -# Customize Header Files -# -# CONFIG_ARCH_STDINT_H is not set -# CONFIG_ARCH_STDBOOL_H is not set -# CONFIG_ARCH_MATH_H is not set -# CONFIG_ARCH_FLOAT_H is not set -# CONFIG_ARCH_STDARG_H is not set -# CONFIG_ARCH_DEBUG_H is not set - -# -# Debug Options -# -# CONFIG_DEBUG_ALERT is not set -# CONFIG_DEBUG_FEATURES is not set -CONFIG_ARCH_HAVE_STACKCHECK=y -# CONFIG_STACK_COLORATION is not set -# CONFIG_ARCH_HAVE_HEAPCHECK is not set -# CONFIG_DEBUG_SYMBOLS is not set -CONFIG_ARCH_HAVE_CUSTOMOPT=y -# CONFIG_DEBUG_NOOPT is not set -# CONFIG_DEBUG_CUSTOMOPT is not set -CONFIG_DEBUG_FULLOPT=y - -# -# System Type -# -CONFIG_ARCH_ARM=y -# CONFIG_ARCH_AVR is not set -# CONFIG_ARCH_HC is not set -# CONFIG_ARCH_MIPS is not set -# CONFIG_ARCH_RENESAS is not set -# CONFIG_ARCH_SIM is not set -# CONFIG_ARCH_X86 is not set -# CONFIG_ARCH_Z16 is not set -# CONFIG_ARCH_Z80 is not set -CONFIG_ARCH="arm" - -# -# ARM Options -# -# CONFIG_ARCH_CHIP_A1X is not set -# CONFIG_ARCH_CHIP_C5471 is not set -# CONFIG_ARCH_CHIP_CALYPSO is not set -# CONFIG_ARCH_CHIP_DM320 is not set -# CONFIG_ARCH_CHIP_EFM32 is not set -# CONFIG_ARCH_CHIP_IMX1 is not set -# CONFIG_ARCH_CHIP_IMX6 is not set -# CONFIG_ARCH_CHIP_KINETIS is not set -# CONFIG_ARCH_CHIP_KL is not set -# CONFIG_ARCH_CHIP_LM is not set -# CONFIG_ARCH_CHIP_TIVA is not set -CONFIG_ARCH_CHIP_LPC11XX=y -# CONFIG_ARCH_CHIP_LPC17XX is not set -# CONFIG_ARCH_CHIP_LPC214X is not set -# CONFIG_ARCH_CHIP_LPC2378 is not set -# CONFIG_ARCH_CHIP_LPC31XX is not set -# CONFIG_ARCH_CHIP_LPC43XX is not set -# CONFIG_ARCH_CHIP_NUC1XX is not set -# CONFIG_ARCH_CHIP_SAMA5 is not set -# CONFIG_ARCH_CHIP_SAMD is not set -# CONFIG_ARCH_CHIP_SAML is not set -# CONFIG_ARCH_CHIP_SAM34 is not set -# CONFIG_ARCH_CHIP_SAMV7 is not set -# CONFIG_ARCH_CHIP_STM32 is not set -# CONFIG_ARCH_CHIP_STM32F7 is not set -# CONFIG_ARCH_CHIP_STM32L4 is not set -# CONFIG_ARCH_CHIP_STR71X is not set -# CONFIG_ARCH_CHIP_TMS570 is not set -# CONFIG_ARCH_CHIP_MOXART is not set -# CONFIG_ARCH_ARM7TDMI is not set -# CONFIG_ARCH_ARM926EJS is not set -# CONFIG_ARCH_ARM920T is not set -CONFIG_ARCH_CORTEXM0=y -# CONFIG_ARCH_CORTEXM3 is not set -# CONFIG_ARCH_CORTEXM4 is not set -# CONFIG_ARCH_CORTEXM7 is not set -# CONFIG_ARCH_CORTEXA5 is not set -# CONFIG_ARCH_CORTEXA8 is not set -# CONFIG_ARCH_CORTEXA9 is not set -# CONFIG_ARCH_CORTEXR4 is not set -# CONFIG_ARCH_CORTEXR4F is not set -# CONFIG_ARCH_CORTEXR5 is not set -# CONFIG_ARCH_CORTEX5F is not set -# CONFIG_ARCH_CORTEXR7 is not set -# CONFIG_ARCH_CORTEXR7F is not set -CONFIG_ARCH_FAMILY="armv6-m" -CONFIG_ARCH_CHIP="lpc11xx" -# CONFIG_ARM_TOOLCHAIN_IAR is not set -# CONFIG_ARM_TOOLCHAIN_GNU is not set -CONFIG_ARCH_HAVE_CMNVECTOR=y -# CONFIG_ARMV7M_CMNVECTOR is not set -# CONFIG_ARMV7M_LAZYFPU is not set -# CONFIG_ARCH_HAVE_FPU is not set -# CONFIG_ARCH_HAVE_DPFPU is not set -# CONFIG_ARCH_HAVE_TRUSTZONE is not set -# CONFIG_ARM_HAVE_MPU_UNIFIED is not set - -# -# ARMV6M Configuration Options -# -# CONFIG_ARMV6M_TOOLCHAIN_BUILDROOT is not set -# CONFIG_ARMV6M_TOOLCHAIN_CODEREDL is not set -# CONFIG_ARMV6M_TOOLCHAIN_CODESOURCERYL is not set -CONFIG_ARMV6M_TOOLCHAIN_GNU_EABIL=y -# CONFIG_LPC11_GPIOIRQ is not set - -# -# LPC11xx Configuration Options -# -# CONFIG_ARCH_CHIP_LPC1114 is not set -CONFIG_ARCH_CHIP_LPC1115=y -CONFIG_ARCH_FAMILY_LPC111X=y - -# -# LPC11xx Peripheral Support -# -CONFIG_LPC11_INTRCOSC=y -# CONFIG_LPC11_MAINOSC is not set -CONFIG_LPC11_SYSTICK_CORECLK=y -# CONFIG_LPC11_SYSTICK_CORECLK_DIV16 is not set -CONFIG_LPC11_PLL=y -CONFIG_LPC11_UART0=y -# CONFIG_LPC11_CAN0 is not set -# CONFIG_LPC11_SPI is not set -# CONFIG_LPC11_SSP0 is not set -# CONFIG_LPC11_SSP1 is not set -# CONFIG_LPC11_I2C0 is not set -# CONFIG_LPC11_TMR0 is not set -# CONFIG_LPC11_TMR1 is not set -# CONFIG_LPC11_WDT is not set -# CONFIG_LPC11_ADC is not set -# CONFIG_LPC11_FLASH is not set - -# -# Serial driver options -# -# CONFIG_SERIAL_TERMIOS is not set - -# -# Architecture Options -# -# CONFIG_ARCH_NOINTC is not set -# CONFIG_ARCH_VECNOTIRQ is not set -# CONFIG_ARCH_DMA is not set -CONFIG_ARCH_HAVE_IRQPRIO=y -# CONFIG_ARCH_L2CACHE is not set -# CONFIG_ARCH_HAVE_COHERENT_DCACHE is not set -# CONFIG_ARCH_HAVE_ADDRENV is not set -# CONFIG_ARCH_NEED_ADDRENV_MAPPING is not set -# CONFIG_ARCH_HAVE_MULTICPU is not set -CONFIG_ARCH_HAVE_VFORK=y -# CONFIG_ARCH_HAVE_MMU is not set -# CONFIG_ARCH_HAVE_MPU is not set -# CONFIG_ARCH_NAND_HWECC is not set -# CONFIG_ARCH_HAVE_EXTCLK is not set -# CONFIG_ARCH_HAVE_POWEROFF is not set -CONFIG_ARCH_HAVE_RESET=y -# CONFIG_ARCH_IRQPRIO is not set -# CONFIG_ARCH_STACKDUMP is not set -# CONFIG_ENDIAN_BIG is not set -# CONFIG_ARCH_IDLE_CUSTOM is not set -# CONFIG_ARCH_HAVE_RAMFUNCS is not set -# CONFIG_ARCH_HAVE_RAMVECTORS is not set - -# -# Board Settings -# -CONFIG_BOARD_LOOPSPERMSEC=2988 -# CONFIG_ARCH_CALIBRATION is not set - -# -# Interrupt options -# -CONFIG_ARCH_HAVE_INTERRUPTSTACK=y -CONFIG_ARCH_INTERRUPTSTACK=0 -# CONFIG_ARCH_HAVE_HIPRI_INTERRUPT is not set - -# -# Boot options -# -# CONFIG_BOOT_RUNFROMEXTSRAM is not set -CONFIG_BOOT_RUNFROMFLASH=y -# CONFIG_BOOT_RUNFROMISRAM is not set -# CONFIG_BOOT_RUNFROMSDRAM is not set -# CONFIG_BOOT_COPYTORAM is not set - -# -# Boot Memory Configuration -# -CONFIG_RAM_START=0x10000000 -CONFIG_RAM_SIZE=8192 -# CONFIG_ARCH_HAVE_SDRAM is not set - -# -# Board Selection -# -CONFIG_ARCH_BOARD_LPCXPRESSO_LPC1115=y -# CONFIG_ARCH_BOARD_CUSTOM is not set -CONFIG_ARCH_BOARD="lpcxpresso-lpc1115" - -# -# Common Board Options -# -CONFIG_ARCH_HAVE_LEDS=y -CONFIG_ARCH_LEDS=y -CONFIG_NSH_MMCSDMINOR=0 - -# -# Board-Specific Options -# -# CONFIG_LIB_BOARDCTL is not set - -# -# RTOS Features -# -CONFIG_DISABLE_OS_API=y -CONFIG_DISABLE_POSIX_TIMERS=y -CONFIG_DISABLE_PTHREAD=y -CONFIG_DISABLE_SIGNALS=y -CONFIG_DISABLE_MQUEUE=y -CONFIG_DISABLE_ENVIRON=y - -# -# Clocks and Timers -# -CONFIG_USEC_PER_TICK=10000 -# CONFIG_SYSTEM_TIME64 is not set -# CONFIG_CLOCK_MONOTONIC is not set -# CONFIG_JULIAN_TIME is not set -CONFIG_START_YEAR=2013 -CONFIG_START_MONTH=2 -CONFIG_START_DAY=26 -CONFIG_MAX_WDOGPARMS=2 -CONFIG_PREALLOC_WDOGS=4 -CONFIG_WDOG_INTRESERVE=0 -CONFIG_PREALLOC_TIMERS=0 - -# -# Tasks and Scheduling -# -# CONFIG_INIT_NONE is not set -CONFIG_INIT_ENTRYPOINT=y -# CONFIG_INIT_FILEPATH is not set -CONFIG_USER_ENTRYPOINT="nsh_main" -CONFIG_RR_INTERVAL=0 -# CONFIG_SCHED_SPORADIC is not set -CONFIG_TASK_NAME_SIZE=0 -CONFIG_MAX_TASKS=4 -# CONFIG_SCHED_HAVE_PARENT is not set -# CONFIG_SCHED_WAITPID is not set - -# -# Performance Monitoring -# -# CONFIG_SCHED_CPULOAD is not set -# CONFIG_SCHED_INSTRUMENTATION is not set - -# -# Files and I/O -# -# CONFIG_DEV_CONSOLE is not set -CONFIG_FDCLONE_DISABLE=y -# CONFIG_FDCLONE_STDIO is not set -CONFIG_SDCLONE_DISABLE=y -CONFIG_NFILE_DESCRIPTORS=0 -CONFIG_NFILE_STREAMS=0 -CONFIG_NAME_MAX=32 -# CONFIG_PRIORITY_INHERITANCE is not set - -# -# RTOS hooks -# -# CONFIG_BOARD_INITIALIZE is not set -# CONFIG_SCHED_STARTHOOK is not set -# CONFIG_SCHED_ATEXIT is not set -# CONFIG_SCHED_ONEXIT is not set -# CONFIG_MODULE is not set - -# -# Work queue support -# - -# -# Stack and heap information -# -CONFIG_IDLETHREAD_STACKSIZE=1024 -CONFIG_USERMAIN_STACKSIZE=1536 -CONFIG_PTHREAD_STACK_MIN=256 -CONFIG_PTHREAD_STACK_DEFAULT=1536 -# CONFIG_LIB_SYSCALL is not set - -# -# Device Drivers -# -CONFIG_DISABLE_POLL=y -# CONFIG_DEV_NULL is not set -# CONFIG_DEV_ZERO is not set -# CONFIG_DEV_LOOP is not set - -# -# Buffering -# -# CONFIG_DRVR_WRITEBUFFER is not set -# CONFIG_DRVR_READAHEAD is not set -# CONFIG_RAMDISK is not set -# CONFIG_CAN is not set -# CONFIG_ARCH_HAVE_PWM_PULSECOUNT is not set -# CONFIG_ARCH_HAVE_PWM_MULTICHAN is not set -# CONFIG_PWM is not set -# CONFIG_ARCH_HAVE_I2CRESET is not set -# CONFIG_I2C is not set -# CONFIG_SPI is not set -# CONFIG_I2S is not set - -# -# Timer Driver Support -# -# CONFIG_TIMER is not set -# CONFIG_RTC is not set -# CONFIG_WATCHDOG is not set -# CONFIG_ANALOG is not set -# CONFIG_AUDIO_DEVICES is not set -# CONFIG_VIDEO_DEVICES is not set -# CONFIG_BCH is not set -# CONFIG_INPUT is not set -# CONFIG_IOEXPANDER is not set - -# -# LCD Driver Support -# -# CONFIG_LCD is not set -# CONFIG_SLCD is not set - -# -# LED Support -# -# CONFIG_USERLED is not set -# CONFIG_RGBLED is not set -# CONFIG_PCA9635PW is not set -# CONFIG_NCP5623C is not set -# CONFIG_MMCSD is not set -# CONFIG_MODEM is not set -# CONFIG_MTD is not set -# CONFIG_EEPROM is not set -# CONFIG_PIPES is not set -# CONFIG_PM is not set -# CONFIG_POWER is not set -# CONFIG_SENSORS is not set -# CONFIG_SERCOMM_CONSOLE is not set -CONFIG_SERIAL=y -# CONFIG_SERIAL_REMOVABLE is not set -CONFIG_SERIAL_CONSOLE=y -# CONFIG_16550_UART is not set -# CONFIG_UART_SERIALDRIVER is not set -CONFIG_UART0_SERIALDRIVER=y -# CONFIG_UART1_SERIALDRIVER is not set -# CONFIG_UART2_SERIALDRIVER is not set -# CONFIG_UART3_SERIALDRIVER is not set -# CONFIG_UART4_SERIALDRIVER is not set -# CONFIG_UART5_SERIALDRIVER is not set -# CONFIG_UART6_SERIALDRIVER is not set -# CONFIG_UART7_SERIALDRIVER is not set -# CONFIG_UART8_SERIALDRIVER is not set -# CONFIG_SCI0_SERIALDRIVER is not set -# CONFIG_SCI1_SERIALDRIVER is not set -# CONFIG_USART0_SERIALDRIVER is not set -# CONFIG_USART1_SERIALDRIVER is not set -# CONFIG_USART2_SERIALDRIVER is not set -# CONFIG_USART3_SERIALDRIVER is not set -# CONFIG_USART4_SERIALDRIVER is not set -# CONFIG_USART5_SERIALDRIVER is not set -# CONFIG_USART6_SERIALDRIVER is not set -# CONFIG_USART7_SERIALDRIVER is not set -# CONFIG_USART8_SERIALDRIVER is not set -# CONFIG_OTHER_UART_SERIALDRIVER is not set -CONFIG_MCU_SERIAL=y -# CONFIG_STANDARD_SERIAL is not set -# CONFIG_SERIAL_IFLOWCONTROL is not set -# CONFIG_SERIAL_OFLOWCONTROL is not set -# CONFIG_SERIAL_DMA is not set -# CONFIG_ARCH_HAVE_SERIAL_TERMIOS is not set -CONFIG_UART0_SERIAL_CONSOLE=y -# CONFIG_OTHER_SERIAL_CONSOLE is not set -# CONFIG_NO_SERIAL_CONSOLE is not set - -# -# UART0 Configuration -# -CONFIG_UART0_RXBUFSIZE=64 -CONFIG_UART0_TXBUFSIZE=64 -CONFIG_UART0_BAUD=115200 -CONFIG_UART0_BITS=8 -CONFIG_UART0_PARITY=0 -CONFIG_UART0_2STOP=0 -# CONFIG_UART0_IFLOWCONTROL is not set -# CONFIG_UART0_OFLOWCONTROL is not set -# CONFIG_UART0_DMA is not set -# CONFIG_USBDEV is not set -# CONFIG_USBHOST is not set -# CONFIG_DRIVERS_WIRELESS is not set - -# -# System Logging -# -# CONFIG_ARCH_SYSLOG is not set -# CONFIG_RAMLOG is not set -# CONFIG_SYSLOG_INTBUFFER is not set -# CONFIG_SYSLOG_TIMESTAMP is not set -# CONFIG_SYSLOG_SERIAL_CONSOLE is not set -# CONFIG_SYSLOG_CHAR is not set -CONFIG_SYSLOG_NONE=y -# CONFIG_SYSLOG_FILE is not set - -# -# Networking Support -# -# CONFIG_ARCH_HAVE_NET is not set -# CONFIG_ARCH_HAVE_PHY is not set -# CONFIG_NET is not set - -# -# Crypto API -# -# CONFIG_CRYPTO is not set - -# -# File Systems -# - -# -# File system configuration -# -CONFIG_DISABLE_MOUNTPOINT=y -CONFIG_DISABLE_PSEUDOFS_OPERATIONS=y -# CONFIG_FS_READABLE is not set -# CONFIG_FS_WRITABLE is not set -# CONFIG_FS_NAMED_SEMAPHORES is not set -# CONFIG_FS_RAMMAP is not set -# CONFIG_FS_PROCFS is not set -# CONFIG_FS_UNIONFS is not set - -# -# Graphics Support -# -# CONFIG_NX is not set - -# -# Memory Management -# -CONFIG_MM_SMALL=y -CONFIG_MM_REGIONS=1 -# CONFIG_ARCH_HAVE_HEAP2 is not set -# CONFIG_GRAN is not set - -# -# Audio Support -# -# CONFIG_AUDIO is not set - -# -# Wireless Support -# - -# -# Binary Loader -# -# CONFIG_BINFMT_DISABLE is not set -# CONFIG_NXFLAT is not set -# CONFIG_ELF is not set -# CONFIG_BUILTIN is not set -# CONFIG_PIC is not set -# CONFIG_SYMTAB_ORDEREDBYNAME is not set - -# -# Library Routines -# - -# -# Standard C Library Options -# -CONFIG_STDIO_BUFFER_SIZE=0 -CONFIG_STDIO_LINEBUFFER=y -CONFIG_NUNGET_CHARS=0 -# CONFIG_LIBM is not set -CONFIG_NOPRINTF_FIELDWIDTH=y -# CONFIG_LIBC_FLOATINGPOINT is not set -# CONFIG_LIBC_LONG_LONG is not set -# CONFIG_LIBC_IOCTL_VARIADIC is not set -CONFIG_LIB_RAND_ORDER=1 -# CONFIG_EOL_IS_CR is not set -# CONFIG_EOL_IS_LF is not set -# CONFIG_EOL_IS_BOTH_CRLF is not set -CONFIG_EOL_IS_EITHER_CRLF=y -# CONFIG_LIBC_EXECFUNCS is not set -CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=1024 -CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=1536 -# CONFIG_LIBC_STRERROR is not set -# CONFIG_LIBC_PERROR_STDOUT is not set -CONFIG_ARCH_LOWPUTC=y -# CONFIG_TIME_EXTENDED is not set -CONFIG_LIB_SENDFILE_BUFSIZE=512 -# CONFIG_ARCH_ROMGETC is not set -# CONFIG_ARCH_OPTIMIZED_FUNCTIONS is not set -CONFIG_ARCH_HAVE_TLS=y -# CONFIG_TLS is not set -# CONFIG_LIBC_NETDB is not set - -# -# Non-standard Library Support -# -# CONFIG_LIB_CRC64_FAST is not set -# CONFIG_LIB_KBDCODEC is not set -# CONFIG_LIB_SLCDCODEC is not set - -# -# Basic CXX Support -# -# CONFIG_C99_BOOL8 is not set -# CONFIG_HAVE_CXX is not set - -# -# Application Configuration -# - -# -# CAN Utilities -# - -# -# Examples -# -# CONFIG_EXAMPLES_CHAT is not set -# CONFIG_EXAMPLES_CONFIGDATA is not set -# CONFIG_EXAMPLES_CPUHOG is not set -# CONFIG_EXAMPLES_DHCPD is not set -# CONFIG_EXAMPLES_ELF is not set -# CONFIG_EXAMPLES_FTPC is not set -# CONFIG_EXAMPLES_FTPD is not set -# CONFIG_EXAMPLES_HELLO is not set -# CONFIG_EXAMPLES_HIDKBD is not set -# CONFIG_EXAMPLES_IGMP is not set -# CONFIG_EXAMPLES_JSON is not set -# CONFIG_EXAMPLES_KEYPADTEST is not set -# CONFIG_EXAMPLES_MEDIA is not set -# CONFIG_EXAMPLES_MM is not set -# CONFIG_EXAMPLES_MODBUS is not set -# CONFIG_EXAMPLES_MOUNT is not set -# CONFIG_EXAMPLES_NRF24L01TERM is not set -CONFIG_EXAMPLES_NSH=y -# CONFIG_EXAMPLES_NULL is not set -# CONFIG_EXAMPLES_NX is not set -# CONFIG_EXAMPLES_NXFFS is not set -# CONFIG_EXAMPLES_NXHELLO is not set -# CONFIG_EXAMPLES_NXIMAGE is not set -# CONFIG_EXAMPLES_NXLINES is not set -# CONFIG_EXAMPLES_NXTERM is not set -# CONFIG_EXAMPLES_NXTEXT is not set -# CONFIG_EXAMPLES_OSTEST is not set -# CONFIG_EXAMPLES_PCA9635 is not set -# CONFIG_EXAMPLES_PIPE is not set -# CONFIG_EXAMPLES_POLL is not set -# CONFIG_EXAMPLES_POSIXSPAWN is not set -# CONFIG_EXAMPLES_PPPD is not set -# CONFIG_EXAMPLES_RGBLED is not set -# CONFIG_EXAMPLES_SENDMAIL is not set -# CONFIG_EXAMPLES_SERIALBLASTER is not set -# CONFIG_EXAMPLES_SERIALRX is not set -# CONFIG_EXAMPLES_SERLOOP is not set -# CONFIG_EXAMPLES_SLCD is not set -# CONFIG_EXAMPLES_SMART is not set -# CONFIG_EXAMPLES_SMP is not set -# CONFIG_EXAMPLES_TCPECHO is not set -# CONFIG_EXAMPLES_TELNETD is not set -# CONFIG_EXAMPLES_TIFF is not set -# CONFIG_EXAMPLES_TOUCHSCREEN is not set -# CONFIG_EXAMPLES_USBTERM is not set -# CONFIG_EXAMPLES_WATCHDOG is not set -# CONFIG_EXAMPLES_WEBSERVER is not set - -# -# File System Utilities -# -# CONFIG_FSUTILS_INIFILE is not set - -# -# GPS Utilities -# -# CONFIG_GPSUTILS_MINMEA_LIB is not set - -# -# Graphics Support -# -# CONFIG_TIFF is not set -# CONFIG_GRAPHICS_TRAVELER is not set - -# -# Interpreters -# -# CONFIG_INTERPRETERS_FICL is not set -# CONFIG_INTERPRETERS_MICROPYTHON is not set -# CONFIG_INTERPRETERS_PCODE is not set - -# -# FreeModBus -# -# CONFIG_MODBUS is not set - -# -# Network Utilities -# -# CONFIG_NETUTILS_CODECS is not set -# CONFIG_NETUTILS_ESP8266 is not set -# CONFIG_NETUTILS_FTPC is not set -# CONFIG_NETUTILS_JSON is not set -# CONFIG_NETUTILS_SMTP is not set - -# -# NSH Library -# -CONFIG_NSH_LIBRARY=y -# CONFIG_NSH_MOTD is not set - -# -# Command Line Configuration -# -CONFIG_NSH_READLINE=y -# CONFIG_NSH_CLE is not set -CONFIG_NSH_LINELEN=80 -CONFIG_NSH_DISABLE_SEMICOLON=y -CONFIG_NSH_MAXARGUMENTS=6 -# CONFIG_NSH_ARGCAT is not set -CONFIG_NSH_NESTDEPTH=3 -# CONFIG_NSH_DISABLEBG is not set - -# -# Disable Individual commands -# -CONFIG_NSH_DISABLE_ADDROUTE=y -CONFIG_NSH_DISABLE_BASENAME=y -# CONFIG_NSH_DISABLE_CAT is not set -CONFIG_NSH_DISABLE_CD=y -CONFIG_NSH_DISABLE_CP=y -# CONFIG_NSH_DISABLE_CMP is not set -CONFIG_NSH_DISABLE_DATE=y -CONFIG_NSH_DISABLE_DD=y -CONFIG_NSH_DISABLE_DF=y -CONFIG_NSH_DISABLE_DELROUTE=y -CONFIG_NSH_DISABLE_DIRNAME=y -# CONFIG_NSH_DISABLE_ECHO is not set -# CONFIG_NSH_DISABLE_EXEC is not set -# CONFIG_NSH_DISABLE_EXIT is not set -# CONFIG_NSH_DISABLE_FREE is not set -CONFIG_NSH_DISABLE_GET=y -# CONFIG_NSH_DISABLE_HELP is not set -# CONFIG_NSH_DISABLE_HEXDUMP is not set -CONFIG_NSH_DISABLE_IFCONFIG=y -CONFIG_NSH_DISABLE_IFUPDOWN=y -# CONFIG_NSH_DISABLE_KILL is not set -CONFIG_NSH_DISABLE_LOSETUP=y -CONFIG_NSH_DISABLE_LOSMART=y -# CONFIG_NSH_DISABLE_LS is not set -# CONFIG_NSH_DISABLE_MB is not set -CONFIG_NSH_DISABLE_MKDIR=y -# CONFIG_NSH_DISABLE_MKFIFO is not set -CONFIG_NSH_DISABLE_MKRD=y -# CONFIG_NSH_DISABLE_MH is not set -CONFIG_NSH_DISABLE_MOUNT=y -CONFIG_NSH_DISABLE_MV=y -# CONFIG_NSH_DISABLE_MW is not set -# CONFIG_NSH_DISABLE_PS is not set -CONFIG_NSH_DISABLE_PUT=y -# CONFIG_NSH_DISABLE_PWD is not set -CONFIG_NSH_DISABLE_RM=y -CONFIG_NSH_DISABLE_RMDIR=y -# CONFIG_NSH_DISABLE_SET is not set -# CONFIG_NSH_DISABLE_SH is not set -# CONFIG_NSH_DISABLE_SLEEP is not set -CONFIG_NSH_DISABLE_TIME=y -# CONFIG_NSH_DISABLE_TEST is not set -CONFIG_NSH_DISABLE_UMOUNT=y -CONFIG_NSH_DISABLE_UNAME=y -# CONFIG_NSH_DISABLE_UNSET is not set -# CONFIG_NSH_DISABLE_USLEEP is not set -CONFIG_NSH_DISABLE_WGET=y -# CONFIG_NSH_DISABLE_XD is not set - -# -# Configure Command Options -# -CONFIG_NSH_CODECS_BUFSIZE=128 -# CONFIG_NSH_CMDOPT_HEXDUMP is not set -CONFIG_NSH_FILEIOSIZE=64 - -# -# Scripting Support -# -CONFIG_NSH_DISABLESCRIPT=y - -# -# Console Configuration -# -CONFIG_NSH_CONSOLE=y -# CONFIG_NSH_ALTCONDEV is not set -# CONFIG_NSH_ARCHINIT is not set -# CONFIG_NSH_LOGIN is not set -# CONFIG_NSH_CONSOLE_LOGIN is not set - -# -# NxWidgets/NxWM -# - -# -# Platform-specific Support -# -# CONFIG_PLATFORM_CONFIGDATA is not set - -# -# System Libraries and NSH Add-Ons -# -# CONFIG_SYSTEM_CLE is not set -# CONFIG_SYSTEM_CUTERM is not set -# CONFIG_SYSTEM_FREE is not set -# CONFIG_LIB_HEX2BIN is not set -# CONFIG_SYSTEM_HEXED is not set -# CONFIG_SYSTEM_INSTALL is not set -# CONFIG_SYSTEM_RAMTEST is not set -CONFIG_READLINE_HAVE_EXTMATCH=y -CONFIG_SYSTEM_READLINE=y -CONFIG_READLINE_ECHO=y -# CONFIG_READLINE_TABCOMPLETION is not set -# CONFIG_READLINE_CMD_HISTORY is not set -# CONFIG_SYSTEM_SUDOKU is not set -# CONFIG_SYSTEM_UBLOXMODEM is not set -# CONFIG_SYSTEM_VI is not set -# CONFIG_SYSTEM_ZMODEM is not set diff --git a/configs/lpcxpresso-lpc1115/minnsh/setenv.sh b/configs/lpcxpresso-lpc1115/minnsh/setenv.sh deleted file mode 100755 index f47c395c1c7..00000000000 --- a/configs/lpcxpresso-lpc1115/minnsh/setenv.sh +++ /dev/null @@ -1,72 +0,0 @@ -#!/bin/bash -# configs/lpcxpresso-lpc1115/minnsh/setenv.sh -# -# Copyright (C) 2015 Gregory Nutt. All rights reserved. -# Author: Gregory Nutt -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in -# the documentation and/or other materials provided with the -# distribution. -# 3. Neither the name NuttX nor the names of its contributors may be -# used to endorse or promote products derived from this software -# without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE -# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, -# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, -# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS -# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED -# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN -# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -# POSSIBILITY OF SUCH DAMAGE. -# - -if [ "$(basename $0)" = "setenv.sh" ] ; then - echo "You must source this script, not run it!" 1>&2 - exit 1 -fi - -if [ -z "${PATH_ORIG}" ]; then export PATH_ORIG="${PATH}"; fi - -WD=`pwd` - -# This is the Cygwin path to the location where I installed the CodeSourcery -# toolchain under windows. You will also have to edit this if you install -# the CodeSourcery toolchain in any other location -#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin" -#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery_CodeBench_Lite_for_ARM_EABI/bin" -# export TOOLCHAIN_BIN="/cygdrive/c/Users/MyName/MentorGraphics/Sourcery_CodeBench_Lite_for_ARM_EABI/bin" - -# This is the location where I installed the ARM "GNU Tools for ARM Embedded Processors" -# You can this free toolchain here https://launchpad.net/gcc-arm-embedded -export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/GNU Tools ARM Embedded/4.9 2015q2/bin" - -# This is the path to the location where I installed the devkitARM toolchain -# You can get this free toolchain from http://devkitpro.org/ or http://sourceforge.net/projects/devkitpro/ -#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/devkitARM/bin" - -# This is the default install location for Code Red on Linux -# export TOOLCHAIN_BIN="/usr/local/LPCXpresso/tools/bin" - -# This is the Cygwin path to the LPCXpresso 3.6 install location under Windows -#export TOOLCHAIN_BIN="/cygdrive/c/nxp/lpcxpresso_3.6/Tools/bin" - -# This is the Cygwin path to the location where I build the buildroot -# toolchain. -# export TOOLCHAIN_BIN="${WD}/../buildroot/build_arm_nofpu/staging_dir/bin" - -# Add the path to the toolchain to the PATH varialble -export PATH="${TOOLCHAIN_BIN}:/sbin:/usr/sbin:${PATH_ORIG}" - -echo "PATH : ${PATH}" diff --git a/configs/stm3220g-eval/ide/nsh/iar/libc.ewp b/configs/stm3220g-eval/ide/nsh/iar/libc.ewp index db57f8d8b93..15e9c88df48 100644 --- a/configs/stm3220g-eval/ide/nsh/iar/libc.ewp +++ b/configs/stm3220g-eval/ide/nsh/iar/libc.ewp @@ -2313,9 +2313,6 @@ $PROJ_DIR$/../../../../../libc/stdio/lib_memsostream.c - - $PROJ_DIR$/../../../../../libc/stdio/lib_lowinstream.c - $PROJ_DIR$/../../../../../libc/stdio/lib_lowoutstream.c diff --git a/configs/stm3220g-eval/ide/nsh/uvision/libc.uvproj b/configs/stm3220g-eval/ide/nsh/uvision/libc.uvproj index 31ee6e86a52..90ecb7c9c13 100644 --- a/configs/stm3220g-eval/ide/nsh/uvision/libc.uvproj +++ b/configs/stm3220g-eval/ide/nsh/uvision/libc.uvproj @@ -953,11 +953,6 @@ 1 ../../../../../libc/stdio/lib_memsostream.c - - lib_lowinstream.c - 1 - ../../../../../libc/stdio/lib_lowinstream.c - lib_lowoutstream.c 1 diff --git a/configs/stm32f103-minimum/README.txt b/configs/stm32f103-minimum/README.txt index 112182b032c..fd4c30987fc 100644 --- a/configs/stm32f103-minimum/README.txt +++ b/configs/stm32f103-minimum/README.txt @@ -421,140 +421,6 @@ instead of configure.sh: Where is one of the following: - minnsh: - ------ - - This is a experiment to see just how small we can get a usable NSH - configuration. This configuration has far fewer features than the nsh - configuration but is also a fraction of the size. - - This minnsh configuration is a "proof-of-concept" and not very usable in - its current state. This configuration was created by disabling - everything possible INCLUDING file system support. Without file system - support, NuttX is pretty much crippled. Here are some of the - consequences of disabling the file system: - - - All features that depend on the file system are lost: device drivers, - mountpoints, message queues, named semaphores. - - - Without device drivers, you cannot interact with the RTOS using POSIX - interfaces. You would have to work with NuttX as with those other - tiny RTOSs: As a scheduler and a callable hardare abstraction layer - (HAL). - - - You cannot use any of the NuttX upper half device drivers since they - depend on the pseudo-file system and device nodes. You can, of - course, continue to use the lower half drivers either directly. Or, - perhaps, you could write some custom minnsh upper half drivers that - do not depend on a file system and expose a HAL interface. - - There is a special version of readline() the NSH uses when there is no - file system. It uses a special up_putc() to write data to the console - and a special function up_getc() to read data from the console. - - - The current up_getc() implementationsa are a kludge. They are - analogous to the up_putc() implementations: They directly poll the - hardware for serial availability, locking up all lower priority tasks - in the entire system while they poll. So a version of NSH that uses - up_getc() essentially blocks the system until a character is received. - - This, of course, could be fixed by creating a special, upper half - implementation of the interrupt-driven serial lower half (like - stm32_serial) that just supports single character console I/O - (perhaps called up_putc and up_getc?). The NSH could wait for serial - input without blocking the system. But then that would increase the - footprint too. - - So although the minnsh configurations are a good starting point for - making things small, they not are really very practical. Why might - you want a NuttX minnsh solution? Perhaps you have software that runs - on a family of chips including some very tiny MCUs. Then perhaps having - the RTOS compatibility would justify the loss of functionality? - - STATUS: - 2016-06-03: Using that config I got this: - - $ ls -l nuttx.bin - -rwxr-xr-x 1 alan alan 12543 Jun 3 17:58 nuttx.bin - - $ arm-none-eabi-size nuttx - text data bss dec hex filename - 12542 1 816 13359 342f nuttx - - And this is free command from NuttX shell: - - NuttShell (NSH) - nsh> free - total used free largest - Mem: 18624 2328 16296 16296 - nsh> - - 2016-06-07: As another experiment, I tried enabling just (1) the file - system, (2) the console device, and (3) the upper half serial driver in - the minnsh configuration. With these changes, NSH should behave better - and we preserve the device driver interface. I made the following - configuration changes: - - Enable the file system: - CONFIG_NFILE_DESCRIPTORS=5 - CONFIG_NFILE_STREAMS=5 - - Enable the console device: - CONFIG_DEV_CONSOLE=y - - Disable most new NSH commands. Some like 'ls' are really mandatory - with a file system: - CONFIG_NSH_DISABLE_xxx=y - - Enable the upper half serial driver: - CONFIG_SERIAL=y - CONFIG_STANDARD_SERIAL=y - - Enable the USART1 serial driver: - CONFIG_STM32_USART1=y - CONFIG_STM32_USART1_SERIALDRIVER=y - CONFIG_USART1_SERIAL_CONSOLE=y - - CONFIG_USART1_2STOP=0 - CONFIG_USART1_BAUD=115200 - CONFIG_USART1_BITS=8 - CONFIG_USART1_PARITY=0 - CONFIG_USART1_RXBUFSIZE=16 - CONFIG_USART1_TXBUFSIZE=16 - - The resulting code was bigger as expected: - - $ arm-none-eabi-size nuttx - text data bss dec hex filename - 19853 88 876 20817 5151 nuttx - - I am sure that other things that could be disabled were also drawn into - the build, so perhaps this could be reduced. This amounts to a size - increase of around 7KB. - - One major part of this size increase is due to the addition of the NSH - 'ls' command. Now, if I disable the 'ls' command, I get: - - $ arm-none-eabi-size nuttx - text data bss dec hex filename - 17804 80 864 18748 493c nuttx - - Or an increase of only 5.1 KB. This, of course, not only excludes the - 'ls' command logic, but also the things that were drawn into the link - when 'ls' was enabled: opendir(), readdir(), closedir(), stat(), and - probably other things. - - So I think we can say that the cost of the file system and true serial - console device was about 5 KB (primarily OS support) and the cost of - the NSH 'ls' command (including OS support) is about 2KB. - - 2016-06-21: Just checking the size after some big system changes: The - size of the base configuration has actually dropped by a few bytes: - - $ arm-none-eabi-size nuttx - text data bss dec hex filename - 12526 4 816 13346 3422 nuttx - nsh: --- Configures the NuttShell (nsh) located at apps/examples/nsh. This diff --git a/configs/stm32f103-minimum/minnsh/Make.defs b/configs/stm32f103-minimum/minnsh/Make.defs deleted file mode 100644 index 8d3d4783053..00000000000 --- a/configs/stm32f103-minimum/minnsh/Make.defs +++ /dev/null @@ -1,113 +0,0 @@ -############################################################################ -# configs/stm32f103-minimum/nsh/Make.defs -# -# Copyright (C) 2016 Gregory Nutt. All rights reserved. -# Author: Gregory Nutt -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in -# the documentation and/or other materials provided with the -# distribution. -# 3. Neither the name NuttX nor the names of its contributors may be -# used to endorse or promote products derived from this software -# without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE -# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, -# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, -# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS -# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED -# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN -# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -# POSSIBILITY OF SUCH DAMAGE. -# -############################################################################ - -include ${TOPDIR}/.config -include ${TOPDIR}/tools/Config.mk -include ${TOPDIR}/arch/arm/src/armv7-m/Toolchain.defs - -LDSCRIPT = ld.script - -ifeq ($(WINTOOL),y) - # Windows-native toolchains - DIRLINK = $(TOPDIR)/tools/copydir.sh - DIRUNLINK = $(TOPDIR)/tools/unlink.sh - MKDEP = $(TOPDIR)/tools/mkwindeps.sh - ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" - ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}" - ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}" -else - # Linux/Cygwin-native toolchain - MKDEP = $(TOPDIR)/tools/mkdeps$(HOSTEXEEXT) - ARCHINCLUDES = -I. -isystem $(TOPDIR)/include - ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx - ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT) -endif - -CC = $(CROSSDEV)gcc -CXX = $(CROSSDEV)g++ -CPP = $(CROSSDEV)gcc -E -LD = $(CROSSDEV)ld -AR = $(CROSSDEV)ar rcs -NM = $(CROSSDEV)nm -OBJCOPY = $(CROSSDEV)objcopy -OBJDUMP = $(CROSSDEV)objdump - -ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'} -ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1} - -ifeq ($(CONFIG_DEBUG_SYMBOLS),y) - ARCHOPTIMIZATION = -g -endif - -ifneq ($(CONFIG_DEBUG_NOOPT),y) - ARCHOPTIMIZATION += $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer -endif - -ARCHCFLAGS = -fno-builtin -ARCHCXXFLAGS = -fno-builtin -fno-exceptions -fcheck-new -ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow -Wundef -ARCHWARNINGSXX = -Wall -Wshadow -Wundef -ARCHDEFINES = -ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10 - -CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe -CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS) -CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe -CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS) -CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -AFLAGS = $(CFLAGS) -D__ASSEMBLY__ - -NXFLATLDFLAGS1 = -r -d -warn-common -NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat-pcrel.ld -no-check-sections -LDNXFLATFLAGS = -e main -s 2048 - -ASMEXT = .S -OBJEXT = .o -LIBEXT = .a -EXEEXT = - -ifneq ($(CROSSDEV),arm-nuttx-elf-) - LDFLAGS += -nostartfiles -nodefaultlibs -endif -ifeq ($(CONFIG_DEBUG_SYMBOLS),y) - LDFLAGS += -g -endif - - -HOSTCC = gcc -HOSTINCLUDES = -I. -HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -Wundef -g -pipe -HOSTLDFLAGS = - diff --git a/configs/stm32f103-minimum/minnsh/defconfig b/configs/stm32f103-minimum/minnsh/defconfig deleted file mode 100644 index a150431a155..00000000000 --- a/configs/stm32f103-minimum/minnsh/defconfig +++ /dev/null @@ -1,1073 +0,0 @@ -# -# Automatically generated file; DO NOT EDIT. -# Nuttx/ Configuration -# - -# -# Build Setup -# -# CONFIG_EXPERIMENTAL is not set -CONFIG_DEFAULT_SMALL=y -CONFIG_HOST_LINUX=y -# CONFIG_HOST_OSX is not set -# CONFIG_HOST_WINDOWS is not set -# CONFIG_HOST_OTHER is not set - -# -# Build Configuration -# -# CONFIG_APPS_DIR="../apps" -CONFIG_BUILD_FLAT=y -# CONFIG_BUILD_2PASS is not set - -# -# Binary Output Formats -# -# CONFIG_RRLOAD_BINARY is not set -# CONFIG_INTELHEX_BINARY is not set -# CONFIG_MOTOROLA_SREC is not set -CONFIG_RAW_BINARY=y -# CONFIG_UBOOT_UIMAGE is not set - -# -# Customize Header Files -# -# CONFIG_ARCH_STDINT_H is not set -# CONFIG_ARCH_STDBOOL_H is not set -# CONFIG_ARCH_MATH_H is not set -# CONFIG_ARCH_FLOAT_H is not set -# CONFIG_ARCH_STDARG_H is not set -# CONFIG_ARCH_DEBUG_H is not set - -# -# Debug Options -# -# CONFIG_DEBUG_ALERT is not set -# CONFIG_DEBUG_FEATURES is not set -CONFIG_ARCH_HAVE_STACKCHECK=y -# CONFIG_STACK_COLORATION is not set -CONFIG_ARCH_HAVE_HEAPCHECK=y -# CONFIG_HEAP_COLORATION is not set -# CONFIG_DEBUG_SYMBOLS is not set -CONFIG_ARCH_HAVE_CUSTOMOPT=y -# CONFIG_DEBUG_NOOPT is not set -# CONFIG_DEBUG_CUSTOMOPT is not set -CONFIG_DEBUG_FULLOPT=y - -# -# System Type -# -CONFIG_ARCH_ARM=y -# CONFIG_ARCH_AVR is not set -# CONFIG_ARCH_HC is not set -# CONFIG_ARCH_MIPS is not set -# CONFIG_ARCH_RENESAS is not set -# CONFIG_ARCH_SIM is not set -# CONFIG_ARCH_X86 is not set -# CONFIG_ARCH_Z16 is not set -# CONFIG_ARCH_Z80 is not set -CONFIG_ARCH="arm" - -# -# ARM Options -# -# CONFIG_ARCH_CHIP_A1X is not set -# CONFIG_ARCH_CHIP_C5471 is not set -# CONFIG_ARCH_CHIP_CALYPSO is not set -# CONFIG_ARCH_CHIP_DM320 is not set -# CONFIG_ARCH_CHIP_EFM32 is not set -# CONFIG_ARCH_CHIP_IMX1 is not set -# CONFIG_ARCH_CHIP_IMX6 is not set -# CONFIG_ARCH_CHIP_KINETIS is not set -# CONFIG_ARCH_CHIP_KL is not set -# CONFIG_ARCH_CHIP_LM is not set -# CONFIG_ARCH_CHIP_TIVA is not set -# CONFIG_ARCH_CHIP_LPC11XX is not set -# CONFIG_ARCH_CHIP_LPC17XX is not set -# CONFIG_ARCH_CHIP_LPC214X is not set -# CONFIG_ARCH_CHIP_LPC2378 is not set -# CONFIG_ARCH_CHIP_LPC31XX is not set -# CONFIG_ARCH_CHIP_LPC43XX is not set -# CONFIG_ARCH_CHIP_NUC1XX is not set -# CONFIG_ARCH_CHIP_SAMA5 is not set -# CONFIG_ARCH_CHIP_SAMD is not set -# CONFIG_ARCH_CHIP_SAML is not set -# CONFIG_ARCH_CHIP_SAM34 is not set -# CONFIG_ARCH_CHIP_SAMV7 is not set -CONFIG_ARCH_CHIP_STM32=y -# CONFIG_ARCH_CHIP_STM32F7 is not set -# CONFIG_ARCH_CHIP_STM32L4 is not set -# CONFIG_ARCH_CHIP_STR71X is not set -# CONFIG_ARCH_CHIP_TMS570 is not set -# CONFIG_ARCH_CHIP_MOXART is not set -# CONFIG_ARCH_ARM7TDMI is not set -# CONFIG_ARCH_ARM926EJS is not set -# CONFIG_ARCH_ARM920T is not set -# CONFIG_ARCH_CORTEXM0 is not set -CONFIG_ARCH_CORTEXM3=y -# CONFIG_ARCH_CORTEXM4 is not set -# CONFIG_ARCH_CORTEXM7 is not set -# CONFIG_ARCH_CORTEXA5 is not set -# CONFIG_ARCH_CORTEXA8 is not set -# CONFIG_ARCH_CORTEXA9 is not set -# CONFIG_ARCH_CORTEXR4 is not set -# CONFIG_ARCH_CORTEXR4F is not set -# CONFIG_ARCH_CORTEXR5 is not set -# CONFIG_ARCH_CORTEX5F is not set -# CONFIG_ARCH_CORTEXR7 is not set -# CONFIG_ARCH_CORTEXR7F is not set -CONFIG_ARCH_FAMILY="armv7-m" -CONFIG_ARCH_CHIP="stm32" -# CONFIG_ARM_TOOLCHAIN_IAR is not set -CONFIG_ARM_TOOLCHAIN_GNU=y -# CONFIG_ARMV7M_USEBASEPRI is not set -CONFIG_ARCH_HAVE_CMNVECTOR=y -# CONFIG_ARMV7M_CMNVECTOR is not set -# CONFIG_ARMV7M_LAZYFPU is not set -# CONFIG_ARCH_HAVE_FPU is not set -# CONFIG_ARCH_HAVE_DPFPU is not set -# CONFIG_ARCH_HAVE_TRUSTZONE is not set -CONFIG_ARM_HAVE_MPU_UNIFIED=y -# CONFIG_ARM_MPU is not set - -# -# ARMV7M Configuration Options -# -# CONFIG_ARMV7M_HAVE_ICACHE is not set -# CONFIG_ARMV7M_HAVE_DCACHE is not set -# CONFIG_ARMV7M_HAVE_ITCM is not set -# CONFIG_ARMV7M_HAVE_DTCM is not set -# CONFIG_ARMV7M_TOOLCHAIN_IARL is not set -# CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT is not set -# CONFIG_ARMV7M_TOOLCHAIN_CODEREDL is not set -# CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL is not set -CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIL=y -CONFIG_ARMV7M_HAVE_STACKCHECK=y -# CONFIG_ARMV7M_STACKCHECK is not set -# CONFIG_ARMV7M_ITMSYSLOG is not set -# CONFIG_SERIAL_TERMIOS is not set - -# -# STM32 Configuration Options -# -# CONFIG_ARCH_CHIP_STM32L151C6 is not set -# CONFIG_ARCH_CHIP_STM32L151C8 is not set -# CONFIG_ARCH_CHIP_STM32L151CB is not set -# CONFIG_ARCH_CHIP_STM32L151R6 is not set -# CONFIG_ARCH_CHIP_STM32L151R8 is not set -# CONFIG_ARCH_CHIP_STM32L151RB is not set -# CONFIG_ARCH_CHIP_STM32L151V6 is not set -# CONFIG_ARCH_CHIP_STM32L151V8 is not set -# CONFIG_ARCH_CHIP_STM32L151VB is not set -# CONFIG_ARCH_CHIP_STM32L152C6 is not set -# CONFIG_ARCH_CHIP_STM32L152C8 is not set -# CONFIG_ARCH_CHIP_STM32L152CB is not set -# CONFIG_ARCH_CHIP_STM32L152R6 is not set -# CONFIG_ARCH_CHIP_STM32L152R8 is not set -# CONFIG_ARCH_CHIP_STM32L152RB is not set -# CONFIG_ARCH_CHIP_STM32L152V6 is not set -# CONFIG_ARCH_CHIP_STM32L152V8 is not set -# CONFIG_ARCH_CHIP_STM32L152VB is not set -# CONFIG_ARCH_CHIP_STM32L162ZD is not set -# CONFIG_ARCH_CHIP_STM32L162VE is not set -# CONFIG_ARCH_CHIP_STM32F100C8 is not set -# CONFIG_ARCH_CHIP_STM32F100CB is not set -# CONFIG_ARCH_CHIP_STM32F100R8 is not set -# CONFIG_ARCH_CHIP_STM32F100RB is not set -# CONFIG_ARCH_CHIP_STM32F100RC is not set -# CONFIG_ARCH_CHIP_STM32F100RD is not set -# CONFIG_ARCH_CHIP_STM32F100RE is not set -# CONFIG_ARCH_CHIP_STM32F100V8 is not set -# CONFIG_ARCH_CHIP_STM32F100VB is not set -# CONFIG_ARCH_CHIP_STM32F100VC is not set -# CONFIG_ARCH_CHIP_STM32F100VD is not set -# CONFIG_ARCH_CHIP_STM32F100VE is not set -# CONFIG_ARCH_CHIP_STM32F102CB is not set -# CONFIG_ARCH_CHIP_STM32F103T8 is not set -# CONFIG_ARCH_CHIP_STM32F103TB is not set -# CONFIG_ARCH_CHIP_STM32F103C4 is not set -CONFIG_ARCH_CHIP_STM32F103C8=y -# CONFIG_ARCH_CHIP_STM32F103CB is not set -# CONFIG_ARCH_CHIP_STM32F103R8 is not set -# CONFIG_ARCH_CHIP_STM32F103RB is not set -# CONFIG_ARCH_CHIP_STM32F103RC is not set -# CONFIG_ARCH_CHIP_STM32F103RD is not set -# CONFIG_ARCH_CHIP_STM32F103RE is not set -# CONFIG_ARCH_CHIP_STM32F103RG is not set -# CONFIG_ARCH_CHIP_STM32F103V8 is not set -# CONFIG_ARCH_CHIP_STM32F103VB is not set -# CONFIG_ARCH_CHIP_STM32F103VC is not set -# CONFIG_ARCH_CHIP_STM32F103VE is not set -# CONFIG_ARCH_CHIP_STM32F103ZE is not set -# CONFIG_ARCH_CHIP_STM32F105VB is not set -# CONFIG_ARCH_CHIP_STM32F105RB is not set -# CONFIG_ARCH_CHIP_STM32F107VC is not set -# CONFIG_ARCH_CHIP_STM32F205RG is not set -# CONFIG_ARCH_CHIP_STM32F207IG is not set -# CONFIG_ARCH_CHIP_STM32F207ZE is not set -# CONFIG_ARCH_CHIP_STM32F302K6 is not set -# CONFIG_ARCH_CHIP_STM32F302K8 is not set -# CONFIG_ARCH_CHIP_STM32F302CB is not set -# CONFIG_ARCH_CHIP_STM32F302CC is not set -# CONFIG_ARCH_CHIP_STM32F302RB is not set -# CONFIG_ARCH_CHIP_STM32F302RC is not set -# CONFIG_ARCH_CHIP_STM32F302VB is not set -# CONFIG_ARCH_CHIP_STM32F302VC is not set -# CONFIG_ARCH_CHIP_STM32F303K6 is not set -# CONFIG_ARCH_CHIP_STM32F303K8 is not set -# CONFIG_ARCH_CHIP_STM32F303C6 is not set -# CONFIG_ARCH_CHIP_STM32F303C8 is not set -# CONFIG_ARCH_CHIP_STM32F303CB is not set -# CONFIG_ARCH_CHIP_STM32F303CC is not set -# CONFIG_ARCH_CHIP_STM32F303RB is not set -# CONFIG_ARCH_CHIP_STM32F303RC is not set -# CONFIG_ARCH_CHIP_STM32F303RD is not set -# CONFIG_ARCH_CHIP_STM32F303RE is not set -# CONFIG_ARCH_CHIP_STM32F303VB is not set -# CONFIG_ARCH_CHIP_STM32F303VC is not set -# CONFIG_ARCH_CHIP_STM32F372C8 is not set -# CONFIG_ARCH_CHIP_STM32F372R8 is not set -# CONFIG_ARCH_CHIP_STM32F372V8 is not set -# CONFIG_ARCH_CHIP_STM32F372CB is not set -# CONFIG_ARCH_CHIP_STM32F372RB is not set -# CONFIG_ARCH_CHIP_STM32F372VB is not set -# CONFIG_ARCH_CHIP_STM32F372CC is not set -# CONFIG_ARCH_CHIP_STM32F372RC is not set -# CONFIG_ARCH_CHIP_STM32F372VC is not set -# CONFIG_ARCH_CHIP_STM32F373C8 is not set -# CONFIG_ARCH_CHIP_STM32F373R8 is not set -# CONFIG_ARCH_CHIP_STM32F373V8 is not set -# CONFIG_ARCH_CHIP_STM32F373CB is not set -# CONFIG_ARCH_CHIP_STM32F373RB is not set -# CONFIG_ARCH_CHIP_STM32F373VB is not set -# CONFIG_ARCH_CHIP_STM32F373CC is not set -# CONFIG_ARCH_CHIP_STM32F373RC is not set -# CONFIG_ARCH_CHIP_STM32F373VC is not set -# CONFIG_ARCH_CHIP_STM32F401RE is not set -# CONFIG_ARCH_CHIP_STM32F411RE is not set -# CONFIG_ARCH_CHIP_STM32F411VE is not set -# CONFIG_ARCH_CHIP_STM32F405RG is not set -# CONFIG_ARCH_CHIP_STM32F405VG is not set -# CONFIG_ARCH_CHIP_STM32F405ZG is not set -# CONFIG_ARCH_CHIP_STM32F407VE is not set -# CONFIG_ARCH_CHIP_STM32F407VG is not set -# CONFIG_ARCH_CHIP_STM32F407ZE is not set -# CONFIG_ARCH_CHIP_STM32F407ZG is not set -# CONFIG_ARCH_CHIP_STM32F407IE is not set -# CONFIG_ARCH_CHIP_STM32F407IG is not set -# CONFIG_ARCH_CHIP_STM32F427V is not set -# CONFIG_ARCH_CHIP_STM32F427Z is not set -# CONFIG_ARCH_CHIP_STM32F427I is not set -# CONFIG_ARCH_CHIP_STM32F429V is not set -# CONFIG_ARCH_CHIP_STM32F429Z is not set -# CONFIG_ARCH_CHIP_STM32F429I is not set -# CONFIG_ARCH_CHIP_STM32F429B is not set -# CONFIG_ARCH_CHIP_STM32F429N is not set -# CONFIG_ARCH_CHIP_STM32F446M is not set -# CONFIG_ARCH_CHIP_STM32F446R is not set -# CONFIG_ARCH_CHIP_STM32F446V is not set -# CONFIG_ARCH_CHIP_STM32F446Z is not set -# CONFIG_ARCH_CHIP_STM32F469A is not set -# CONFIG_ARCH_CHIP_STM32F469I is not set -# CONFIG_ARCH_CHIP_STM32F469B is not set -# CONFIG_ARCH_CHIP_STM32F469N is not set -CONFIG_STM32_FLASH_CONFIG_DEFAULT=y -# CONFIG_STM32_FLASH_CONFIG_4 is not set -# CONFIG_STM32_FLASH_CONFIG_6 is not set -# CONFIG_STM32_FLASH_CONFIG_8 is not set -# CONFIG_STM32_FLASH_CONFIG_B is not set -# CONFIG_STM32_FLASH_CONFIG_C is not set -# CONFIG_STM32_FLASH_CONFIG_D is not set -# CONFIG_STM32_FLASH_CONFIG_E is not set -# CONFIG_STM32_FLASH_CONFIG_F is not set -# CONFIG_STM32_FLASH_CONFIG_G is not set -# CONFIG_STM32_FLASH_CONFIG_I is not set -# CONFIG_STM32_STM32L15XX is not set -# CONFIG_STM32_ENERGYLITE is not set -CONFIG_STM32_STM32F10XX=y -# CONFIG_STM32_VALUELINE is not set -# CONFIG_STM32_CONNECTIVITYLINE is not set -CONFIG_STM32_PERFORMANCELINE=y -# CONFIG_STM32_USBACCESSLINE is not set -# CONFIG_STM32_HIGHDENSITY is not set -CONFIG_STM32_MEDIUMDENSITY=y -# CONFIG_STM32_LOWDENSITY is not set -# CONFIG_STM32_STM32F20XX is not set -# CONFIG_STM32_STM32F205 is not set -# CONFIG_STM32_STM32F207 is not set -# CONFIG_STM32_STM32F30XX is not set -# CONFIG_STM32_STM32F302 is not set -# CONFIG_STM32_STM32F303 is not set -# CONFIG_STM32_STM32F37XX is not set -# CONFIG_STM32_STM32F40XX is not set -# CONFIG_STM32_STM32F401 is not set -# CONFIG_STM32_STM32F411 is not set -# CONFIG_STM32_STM32F405 is not set -# CONFIG_STM32_STM32F407 is not set -# CONFIG_STM32_STM32F427 is not set -# CONFIG_STM32_STM32F429 is not set -# CONFIG_STM32_STM32F446 is not set -# CONFIG_STM32_STM32F469 is not set -# CONFIG_STM32_DFU is not set - -# -# STM32 Peripheral Support -# -# CONFIG_STM32_HAVE_CCM is not set -CONFIG_STM32_HAVE_USBDEV=y -# CONFIG_STM32_HAVE_OTGFS is not set -# CONFIG_STM32_HAVE_FSMC is not set -# CONFIG_STM32_HAVE_LTDC is not set -CONFIG_STM32_HAVE_USART3=y -CONFIG_STM32_HAVE_UART4=y -CONFIG_STM32_HAVE_UART5=y -# CONFIG_STM32_HAVE_USART6 is not set -# CONFIG_STM32_HAVE_UART7 is not set -# CONFIG_STM32_HAVE_UART8 is not set -CONFIG_STM32_HAVE_TIM1=y -# CONFIG_STM32_HAVE_TIM2 is not set -CONFIG_STM32_HAVE_TIM3=y -CONFIG_STM32_HAVE_TIM4=y -CONFIG_STM32_HAVE_TIM5=y -CONFIG_STM32_HAVE_TIM6=y -CONFIG_STM32_HAVE_TIM7=y -CONFIG_STM32_HAVE_TIM8=y -# CONFIG_STM32_HAVE_TIM9 is not set -# CONFIG_STM32_HAVE_TIM10 is not set -# CONFIG_STM32_HAVE_TIM11 is not set -# CONFIG_STM32_HAVE_TIM12 is not set -# CONFIG_STM32_HAVE_TIM13 is not set -# CONFIG_STM32_HAVE_TIM14 is not set -# CONFIG_STM32_HAVE_TIM15 is not set -# CONFIG_STM32_HAVE_TIM16 is not set -# CONFIG_STM32_HAVE_TIM17 is not set -CONFIG_STM32_HAVE_ADC2=y -CONFIG_STM32_HAVE_ADC3=y -# CONFIG_STM32_HAVE_ADC4 is not set -# CONFIG_STM32_HAVE_ADC1_DMA is not set -# CONFIG_STM32_HAVE_ADC2_DMA is not set -# CONFIG_STM32_HAVE_ADC3_DMA is not set -# CONFIG_STM32_HAVE_ADC4_DMA is not set -CONFIG_STM32_HAVE_CAN1=y -# CONFIG_STM32_HAVE_CAN2 is not set -# CONFIG_STM32_HAVE_DAC1 is not set -# CONFIG_STM32_HAVE_DAC2 is not set -# CONFIG_STM32_HAVE_RNG is not set -# CONFIG_STM32_HAVE_ETHMAC is not set -CONFIG_STM32_HAVE_I2C2=y -# CONFIG_STM32_HAVE_I2C3 is not set -CONFIG_STM32_HAVE_SPI2=y -CONFIG_STM32_HAVE_SPI3=y -# CONFIG_STM32_HAVE_SPI4 is not set -# CONFIG_STM32_HAVE_SPI5 is not set -# CONFIG_STM32_HAVE_SPI6 is not set -# CONFIG_STM32_HAVE_SAIPLL is not set -# CONFIG_STM32_HAVE_I2SPLL is not set -# CONFIG_STM32_ADC1 is not set -# CONFIG_STM32_ADC2 is not set -# CONFIG_STM32_ADC3 is not set -# CONFIG_STM32_BKP is not set -# CONFIG_STM32_CAN1 is not set -# CONFIG_STM32_CRC is not set -# CONFIG_STM32_DMA1 is not set -# CONFIG_STM32_DMA2 is not set -# CONFIG_STM32_I2C1 is not set -# CONFIG_STM32_I2C2 is not set -# CONFIG_STM32_PWR is not set -# CONFIG_STM32_SDIO is not set -# CONFIG_STM32_SPI1 is not set -# CONFIG_STM32_SPI2 is not set -# CONFIG_STM32_SPI3 is not set -# CONFIG_STM32_TIM1 is not set -# CONFIG_STM32_TIM2 is not set -# CONFIG_STM32_TIM3 is not set -# CONFIG_STM32_TIM4 is not set -# CONFIG_STM32_TIM5 is not set -# CONFIG_STM32_TIM6 is not set -# CONFIG_STM32_TIM7 is not set -# CONFIG_STM32_TIM8 is not set -CONFIG_STM32_USART1=y -# CONFIG_STM32_USART2 is not set -# CONFIG_STM32_USART3 is not set -# CONFIG_STM32_UART4 is not set -# CONFIG_STM32_UART5 is not set -# CONFIG_STM32_USB is not set -# CONFIG_STM32_IWDG is not set -# CONFIG_STM32_WWDG is not set -# CONFIG_STM32_NOEXT_VECTORS is not set - -# -# Alternate Pin Mapping -# -# CONFIG_STM32_USART1_REMAP is not set -# CONFIG_STM32_JTAG_DISABLE is not set -CONFIG_STM32_JTAG_FULL_ENABLE=y -# CONFIG_STM32_JTAG_NOJNTRST_ENABLE is not set -# CONFIG_STM32_JTAG_SW_ENABLE is not set -CONFIG_STM32_DISABLE_IDLE_SLEEP_DURING_DEBUG=y -# CONFIG_STM32_FORCEPOWER is not set -# CONFIG_ARCH_BOARD_STM32_CUSTOM_CLOCKCONFIG is not set - -# -# Timer Configuration -# -# CONFIG_STM32_ONESHOT is not set -# CONFIG_STM32_FREERUN is not set -# CONFIG_STM32_TIM1_CAP is not set -# CONFIG_STM32_TIM3_CAP is not set -# CONFIG_STM32_TIM4_CAP is not set -# CONFIG_STM32_TIM5_CAP is not set -# CONFIG_STM32_TIM8_CAP is not set -CONFIG_STM32_USART=y -CONFIG_STM32_SERIALDRIVER=y - -# -# U[S]ART Configuration -# - -# -# U[S]ART Device Configuration -# -CONFIG_STM32_USART1_SERIALDRIVER=y -# CONFIG_STM32_USART1_1WIREDRIVER is not set -# CONFIG_USART1_RS485 is not set - -# -# Serial Driver Configuration -# -# CONFIG_SERIAL_DISABLE_REORDERING is not set -# CONFIG_STM32_FLOWCONTROL_BROKEN is not set -# CONFIG_STM32_USART_BREAKS is not set -# CONFIG_STM32_USART_SINGLEWIRE is not set -CONFIG_STM32_HAVE_RTC_COUNTER=y -# CONFIG_STM32_HAVE_RTC_SUBSECONDS is not set - -# -# USB FS Host Configuration -# - -# -# USB HS Host Configuration -# - -# -# USB Host Debug Configuration -# - -# -# USB Device Configuration -# - -# -# Architecture Options -# -# CONFIG_ARCH_NOINTC is not set -# CONFIG_ARCH_VECNOTIRQ is not set -# CONFIG_ARCH_DMA is not set -CONFIG_ARCH_HAVE_IRQPRIO=y -# CONFIG_ARCH_L2CACHE is not set -# CONFIG_ARCH_HAVE_COHERENT_DCACHE is not set -# CONFIG_ARCH_HAVE_ADDRENV is not set -# CONFIG_ARCH_NEED_ADDRENV_MAPPING is not set -# CONFIG_ARCH_HAVE_MULTICPU is not set -CONFIG_ARCH_HAVE_VFORK=y -# CONFIG_ARCH_HAVE_MMU is not set -CONFIG_ARCH_HAVE_MPU=y -# CONFIG_ARCH_NAND_HWECC is not set -# CONFIG_ARCH_HAVE_EXTCLK is not set -# CONFIG_ARCH_HAVE_POWEROFF is not set -CONFIG_ARCH_HAVE_RESET=y -# CONFIG_ARCH_USE_MPU is not set -# CONFIG_ARCH_IRQPRIO is not set -# CONFIG_ARCH_STACKDUMP is not set -# CONFIG_ENDIAN_BIG is not set -# CONFIG_ARCH_IDLE_CUSTOM is not set -# CONFIG_ARCH_HAVE_RAMFUNCS is not set -CONFIG_ARCH_HAVE_RAMVECTORS=y -# CONFIG_ARCH_RAMVECTORS is not set - -# -# Board Settings -# -CONFIG_BOARD_LOOPSPERMSEC=5483 -# CONFIG_ARCH_CALIBRATION is not set - -# -# Interrupt options -# -CONFIG_ARCH_HAVE_INTERRUPTSTACK=y -CONFIG_ARCH_INTERRUPTSTACK=0 -CONFIG_ARCH_HAVE_HIPRI_INTERRUPT=y -# CONFIG_ARCH_HIPRI_INTERRUPT is not set - -# -# Boot options -# -# CONFIG_BOOT_RUNFROMEXTSRAM is not set -CONFIG_BOOT_RUNFROMFLASH=y -# CONFIG_BOOT_RUNFROMISRAM is not set -# CONFIG_BOOT_RUNFROMSDRAM is not set -# CONFIG_BOOT_COPYTORAM is not set - -# -# Boot Memory Configuration -# -CONFIG_RAM_START=0x20000000 -CONFIG_RAM_SIZE=20480 -# CONFIG_ARCH_HAVE_SDRAM is not set - -# -# Board Selection -# -# CONFIG_ARCH_BOARD_STM32_TINY is not set -CONFIG_ARCH_BOARD_STM32F103_MINIMUM=y -# CONFIG_ARCH_BOARD_CUSTOM is not set -CONFIG_ARCH_BOARD="stm32f103-minimum" - -# -# Common Board Options -# -CONFIG_ARCH_HAVE_LEDS=y -CONFIG_ARCH_LEDS=y - -# -# Board-Specific Options -# -# CONFIG_BOARD_CRASHDUMP is not set -# CONFIG_LIB_BOARDCTL is not set - -# -# RTOS Features -# -CONFIG_DISABLE_OS_API=y -CONFIG_DISABLE_POSIX_TIMERS=y -CONFIG_DISABLE_PTHREAD=y -CONFIG_DISABLE_SIGNALS=y -CONFIG_DISABLE_MQUEUE=y -CONFIG_DISABLE_ENVIRON=y - -# -# Clocks and Timers -# -CONFIG_ARCH_HAVE_TICKLESS=y -# CONFIG_SCHED_TICKLESS is not set -CONFIG_USEC_PER_TICK=10000 -# CONFIG_SYSTEM_TIME64 is not set -# CONFIG_CLOCK_MONOTONIC is not set -CONFIG_ARCH_HAVE_TIMEKEEPING=y -# CONFIG_JULIAN_TIME is not set -CONFIG_START_YEAR=2013 -CONFIG_START_MONTH=2 -CONFIG_START_DAY=26 -CONFIG_MAX_WDOGPARMS=2 -CONFIG_PREALLOC_WDOGS=4 -CONFIG_WDOG_INTRESERVE=0 -CONFIG_PREALLOC_TIMERS=0 - -# -# Tasks and Scheduling -# -# CONFIG_INIT_NONE is not set -CONFIG_INIT_ENTRYPOINT=y -# CONFIG_INIT_FILEPATH is not set -CONFIG_USER_ENTRYPOINT="nsh_main" -CONFIG_RR_INTERVAL=0 -# CONFIG_SCHED_SPORADIC is not set -CONFIG_TASK_NAME_SIZE=0 -CONFIG_MAX_TASKS=4 -# CONFIG_SCHED_HAVE_PARENT is not set -# CONFIG_SCHED_WAITPID is not set - -# -# Performance Monitoring -# -# CONFIG_SCHED_CPULOAD is not set -# CONFIG_SCHED_INSTRUMENTATION is not set - -# -# Files and I/O -# -# CONFIG_DEV_CONSOLE is not set -CONFIG_FDCLONE_DISABLE=y -# CONFIG_FDCLONE_STDIO is not set -CONFIG_SDCLONE_DISABLE=y -CONFIG_NFILE_DESCRIPTORS=0 -CONFIG_NFILE_STREAMS=0 -CONFIG_NAME_MAX=32 -# CONFIG_PRIORITY_INHERITANCE is not set - -# -# RTOS hooks -# -# CONFIG_BOARD_INITIALIZE is not set -# CONFIG_SCHED_STARTHOOK is not set -# CONFIG_SCHED_ATEXIT is not set -# CONFIG_SCHED_ONEXIT is not set -# CONFIG_MODULE is not set - -# -# Work queue support -# - -# -# Stack and heap information -# -CONFIG_IDLETHREAD_STACKSIZE=1024 -CONFIG_USERMAIN_STACKSIZE=2048 -CONFIG_PTHREAD_STACK_MIN=256 -CONFIG_PTHREAD_STACK_DEFAULT=2048 -# CONFIG_LIB_SYSCALL is not set - -# -# Device Drivers -# -CONFIG_DISABLE_POLL=y -# CONFIG_DEV_NULL is not set -# CONFIG_DEV_ZERO is not set -# CONFIG_DEV_URANDOM is not set -# CONFIG_DEV_LOOP is not set - -# -# Buffering -# -# CONFIG_DRVR_WRITEBUFFER is not set -# CONFIG_DRVR_READAHEAD is not set -# CONFIG_RAMDISK is not set -# CONFIG_CAN is not set -# CONFIG_ARCH_HAVE_PWM_PULSECOUNT is not set -# CONFIG_ARCH_HAVE_PWM_MULTICHAN is not set -# CONFIG_PWM is not set -CONFIG_ARCH_HAVE_I2CRESET=y -# CONFIG_I2C is not set -# CONFIG_SPI is not set -CONFIG_ARCH_HAVE_SPI_BITORDER=y -# CONFIG_I2S is not set - -# -# Timer Driver Support -# -# CONFIG_TIMER is not set -# CONFIG_RTC is not set -# CONFIG_WATCHDOG is not set -# CONFIG_ANALOG is not set -# CONFIG_AUDIO_DEVICES is not set -# CONFIG_VIDEO_DEVICES is not set -# CONFIG_BCH is not set -# CONFIG_INPUT is not set - -# -# IO Expander/GPIO Support -# -# CONFIG_IOEXPANDER is not set -# CONFIG_DEV_GPIO is not set - -# -# LCD Driver Support -# -# CONFIG_LCD is not set -# CONFIG_SLCD is not set - -# -# LED Support -# -# CONFIG_USERLED is not set -# CONFIG_RGBLED is not set -# CONFIG_PCA9635PW is not set -# CONFIG_NCP5623C is not set -# CONFIG_MMCSD is not set -# CONFIG_MODEM is not set -# CONFIG_MTD is not set -# CONFIG_EEPROM is not set -# CONFIG_PIPES is not set -# CONFIG_PM is not set -# CONFIG_POWER is not set -# CONFIG_SENSORS is not set -# CONFIG_SERCOMM_CONSOLE is not set -CONFIG_SERIAL=y -# CONFIG_SERIAL_REMOVABLE is not set -CONFIG_SERIAL_CONSOLE=y -# CONFIG_16550_UART is not set -# CONFIG_UART_SERIALDRIVER is not set -# CONFIG_UART0_SERIALDRIVER is not set -# CONFIG_UART1_SERIALDRIVER is not set -# CONFIG_UART2_SERIALDRIVER is not set -# CONFIG_UART3_SERIALDRIVER is not set -# CONFIG_UART4_SERIALDRIVER is not set -# CONFIG_UART5_SERIALDRIVER is not set -# CONFIG_UART6_SERIALDRIVER is not set -# CONFIG_UART7_SERIALDRIVER is not set -# CONFIG_UART8_SERIALDRIVER is not set -# CONFIG_SCI0_SERIALDRIVER is not set -# CONFIG_SCI1_SERIALDRIVER is not set -# CONFIG_USART0_SERIALDRIVER is not set -CONFIG_USART1_SERIALDRIVER=y -# CONFIG_USART2_SERIALDRIVER is not set -# CONFIG_USART3_SERIALDRIVER is not set -# CONFIG_USART4_SERIALDRIVER is not set -# CONFIG_USART5_SERIALDRIVER is not set -# CONFIG_USART6_SERIALDRIVER is not set -# CONFIG_USART7_SERIALDRIVER is not set -# CONFIG_USART8_SERIALDRIVER is not set -# CONFIG_OTHER_UART_SERIALDRIVER is not set -CONFIG_MCU_SERIAL=y -# CONFIG_STANDARD_SERIAL is not set -# CONFIG_SERIAL_IFLOWCONTROL is not set -# CONFIG_SERIAL_OFLOWCONTROL is not set -# CONFIG_SERIAL_DMA is not set -CONFIG_ARCH_HAVE_SERIAL_TERMIOS=y -CONFIG_USART1_SERIAL_CONSOLE=y -# CONFIG_OTHER_SERIAL_CONSOLE is not set -# CONFIG_NO_SERIAL_CONSOLE is not set - -# -# USART1 Configuration -# -CONFIG_USART1_RXBUFSIZE=64 -CONFIG_USART1_TXBUFSIZE=64 -CONFIG_USART1_BAUD=115200 -CONFIG_USART1_BITS=8 -CONFIG_USART1_PARITY=0 -CONFIG_USART1_2STOP=0 -# CONFIG_USART1_IFLOWCONTROL is not set -# CONFIG_USART1_OFLOWCONTROL is not set -# CONFIG_USART1_DMA is not set -# CONFIG_PSEUDOTERM is not set -# CONFIG_USBDEV is not set -# CONFIG_USBHOST is not set -# CONFIG_HAVE_USBTRACE is not set -# CONFIG_DRIVERS_WIRELESS is not set - -# -# System Logging -# -# CONFIG_ARCH_SYSLOG is not set -# CONFIG_RAMLOG is not set -# CONFIG_SYSLOG_INTBUFFER is not set -# CONFIG_SYSLOG_TIMESTAMP is not set -# CONFIG_SYSLOG_SERIAL_CONSOLE is not set -# CONFIG_SYSLOG_CHAR is not set -CONFIG_SYSLOG_NONE=y -# CONFIG_SYSLOG_FILE is not set -# CONFIG_SYSLOG_CHARDEV is not set - -# -# Networking Support -# -# CONFIG_ARCH_HAVE_NET is not set -# CONFIG_ARCH_HAVE_PHY is not set -# CONFIG_NET is not set - -# -# Crypto API -# -# CONFIG_CRYPTO is not set - -# -# File Systems -# - -# -# File system configuration -# -CONFIG_DISABLE_MOUNTPOINT=y -CONFIG_DISABLE_PSEUDOFS_OPERATIONS=y -# CONFIG_FS_READABLE is not set -# CONFIG_FS_WRITABLE is not set -# CONFIG_FS_NAMED_SEMAPHORES is not set -# CONFIG_FS_RAMMAP is not set -# CONFIG_FS_PROCFS is not set -# CONFIG_FS_UNIONFS is not set - -# -# Graphics Support -# -# CONFIG_NX is not set - -# -# Memory Management -# -CONFIG_MM_SMALL=y -CONFIG_MM_REGIONS=1 -# CONFIG_ARCH_HAVE_HEAP2 is not set -# CONFIG_GRAN is not set - -# -# Audio Support -# -# CONFIG_AUDIO is not set - -# -# Wireless Support -# - -# -# Binary Loader -# -# CONFIG_BINFMT_DISABLE is not set -# CONFIG_NXFLAT is not set -# CONFIG_ELF is not set -# CONFIG_BUILTIN is not set -# CONFIG_PIC is not set -# CONFIG_SYMTAB_ORDEREDBYNAME is not set - -# -# Library Routines -# - -# -# Standard C Library Options -# -CONFIG_STDIO_BUFFER_SIZE=0 -CONFIG_STDIO_LINEBUFFER=y -CONFIG_NUNGET_CHARS=0 -# CONFIG_LIBM is not set -CONFIG_NOPRINTF_FIELDWIDTH=y -# CONFIG_LIBC_FLOATINGPOINT is not set -# CONFIG_LIBC_LONG_LONG is not set -# CONFIG_LIBC_IOCTL_VARIADIC is not set -CONFIG_LIB_RAND_ORDER=1 -# CONFIG_EOL_IS_CR is not set -# CONFIG_EOL_IS_LF is not set -# CONFIG_EOL_IS_BOTH_CRLF is not set -CONFIG_EOL_IS_EITHER_CRLF=y -# CONFIG_LIBC_EXECFUNCS is not set -CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=1024 -CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=2048 -# CONFIG_LIBC_STRERROR is not set -# CONFIG_LIBC_PERROR_STDOUT is not set -CONFIG_ARCH_LOWPUTC=y -# CONFIG_TIME_EXTENDED is not set -CONFIG_LIB_SENDFILE_BUFSIZE=512 -# CONFIG_ARCH_ROMGETC is not set -# CONFIG_ARCH_OPTIMIZED_FUNCTIONS is not set -CONFIG_ARCH_HAVE_TLS=y -# CONFIG_TLS is not set -# CONFIG_LIBC_NETDB is not set - -# -# Non-standard Library Support -# -# CONFIG_LIB_CRC64_FAST is not set -# CONFIG_LIB_KBDCODEC is not set -# CONFIG_LIB_SLCDCODEC is not set -# CONFIG_LIB_HEX2BIN is not set - -# -# Basic CXX Support -# -# CONFIG_C99_BOOL8 is not set -# CONFIG_HAVE_CXX is not set - -# -# Application Configuration -# - -# -# CAN Utilities -# - -# -# Examples -# -# CONFIG_EXAMPLES_CHAT is not set -# CONFIG_EXAMPLES_CONFIGDATA is not set -# CONFIG_EXAMPLES_DHCPD is not set -# CONFIG_EXAMPLES_ELF is not set -# CONFIG_EXAMPLES_FTPC is not set -# CONFIG_EXAMPLES_FTPD is not set -# CONFIG_EXAMPLES_HELLO is not set -# CONFIG_EXAMPLES_HIDKBD is not set -# CONFIG_EXAMPLES_IGMP is not set -# CONFIG_EXAMPLES_JSON is not set -# CONFIG_EXAMPLES_KEYPADTEST is not set -# CONFIG_EXAMPLES_MEDIA is not set -# CONFIG_EXAMPLES_MM is not set -# CONFIG_EXAMPLES_MODBUS is not set -# CONFIG_EXAMPLES_MOUNT is not set -# CONFIG_EXAMPLES_NRF24L01TERM is not set -CONFIG_EXAMPLES_NSH=y -# CONFIG_EXAMPLES_NULL is not set -# CONFIG_EXAMPLES_NX is not set -# CONFIG_EXAMPLES_NXFFS is not set -# CONFIG_EXAMPLES_NXHELLO is not set -# CONFIG_EXAMPLES_NXIMAGE is not set -# CONFIG_EXAMPLES_NXLINES is not set -# CONFIG_EXAMPLES_NXTERM is not set -# CONFIG_EXAMPLES_NXTEXT is not set -# CONFIG_EXAMPLES_OSTEST is not set -# CONFIG_EXAMPLES_PCA9635 is not set -# CONFIG_EXAMPLES_POSIXSPAWN is not set -# CONFIG_EXAMPLES_PPPD is not set -# CONFIG_EXAMPLES_RFID_READUID is not set -# CONFIG_EXAMPLES_RGBLED is not set -# CONFIG_EXAMPLES_SENDMAIL is not set -# CONFIG_EXAMPLES_SERIALBLASTER is not set -# CONFIG_EXAMPLES_SERIALRX is not set -# CONFIG_EXAMPLES_SERLOOP is not set -# CONFIG_EXAMPLES_SLCD is not set -# CONFIG_EXAMPLES_SMART is not set -# CONFIG_EXAMPLES_SMP is not set -# CONFIG_EXAMPLES_TCPECHO is not set -# CONFIG_EXAMPLES_TELNETD is not set -# CONFIG_EXAMPLES_TIFF is not set -# CONFIG_EXAMPLES_TOUCHSCREEN is not set -# CONFIG_EXAMPLES_USBTERM is not set -# CONFIG_EXAMPLES_WATCHDOG is not set -# CONFIG_EXAMPLES_WEBSERVER is not set - -# -# File System Utilities -# -# CONFIG_FSUTILS_INIFILE is not set - -# -# GPS Utilities -# -# CONFIG_GPSUTILS_MINMEA_LIB is not set - -# -# Graphics Support -# -# CONFIG_TIFF is not set -# CONFIG_GRAPHICS_TRAVELER is not set - -# -# Interpreters -# -# CONFIG_INTERPRETERS_FICL is not set -# CONFIG_INTERPRETERS_MICROPYTHON is not set -# CONFIG_INTERPRETERS_PCODE is not set - -# -# FreeModBus -# -# CONFIG_MODBUS is not set - -# -# Network Utilities -# -# CONFIG_NETUTILS_CODECS is not set -# CONFIG_NETUTILS_ESP8266 is not set -# CONFIG_NETUTILS_FTPC is not set -# CONFIG_NETUTILS_JSON is not set -# CONFIG_NETUTILS_SMTP is not set - -# -# NSH Library -# -CONFIG_NSH_LIBRARY=y -# CONFIG_NSH_MOTD is not set - -# -# Command Line Configuration -# -CONFIG_NSH_READLINE=y -# CONFIG_NSH_CLE is not set -CONFIG_NSH_LINELEN=80 -CONFIG_NSH_DISABLE_SEMICOLON=y -CONFIG_NSH_MAXARGUMENTS=6 -# CONFIG_NSH_ARGCAT is not set -CONFIG_NSH_NESTDEPTH=3 -# CONFIG_NSH_DISABLEBG is not set - -# -# Disable Individual commands -# -CONFIG_NSH_DISABLE_ADDROUTE=y -CONFIG_NSH_DISABLE_BASENAME=y -# CONFIG_NSH_DISABLE_CAT is not set -CONFIG_NSH_DISABLE_CD=y -CONFIG_NSH_DISABLE_CP=y -# CONFIG_NSH_DISABLE_CMP is not set -CONFIG_NSH_DISABLE_DATE=y -CONFIG_NSH_DISABLE_DD=y -CONFIG_NSH_DISABLE_DF=y -CONFIG_NSH_DISABLE_DELROUTE=y -CONFIG_NSH_DISABLE_DIRNAME=y -# CONFIG_NSH_DISABLE_ECHO is not set -# CONFIG_NSH_DISABLE_EXEC is not set -# CONFIG_NSH_DISABLE_EXIT is not set -# CONFIG_NSH_DISABLE_FREE is not set -CONFIG_NSH_DISABLE_GET=y -# CONFIG_NSH_DISABLE_HELP is not set -# CONFIG_NSH_DISABLE_HEXDUMP is not set -CONFIG_NSH_DISABLE_IFCONFIG=y -CONFIG_NSH_DISABLE_IFUPDOWN=y -# CONFIG_NSH_DISABLE_KILL is not set -CONFIG_NSH_DISABLE_LOSETUP=y -CONFIG_NSH_DISABLE_LOSMART=y -# CONFIG_NSH_DISABLE_LS is not set -# CONFIG_NSH_DISABLE_MB is not set -CONFIG_NSH_DISABLE_MKDIR=y -CONFIG_NSH_DISABLE_MKRD=y -# CONFIG_NSH_DISABLE_MH is not set -CONFIG_NSH_DISABLE_MOUNT=y -CONFIG_NSH_DISABLE_MV=y -# CONFIG_NSH_DISABLE_MW is not set -# CONFIG_NSH_DISABLE_PS is not set -CONFIG_NSH_DISABLE_PUT=y -# CONFIG_NSH_DISABLE_PWD is not set -CONFIG_NSH_DISABLE_RM=y -CONFIG_NSH_DISABLE_RMDIR=y -# CONFIG_NSH_DISABLE_SET is not set -# CONFIG_NSH_DISABLE_SH is not set -# CONFIG_NSH_DISABLE_SLEEP is not set -CONFIG_NSH_DISABLE_TIME=y -# CONFIG_NSH_DISABLE_TEST is not set -CONFIG_NSH_DISABLE_UMOUNT=y -CONFIG_NSH_DISABLE_UNAME=y -# CONFIG_NSH_DISABLE_UNSET is not set -# CONFIG_NSH_DISABLE_USLEEP is not set -CONFIG_NSH_DISABLE_WGET=y -# CONFIG_NSH_DISABLE_XD is not set -CONFIG_NSH_MMCSDMINOR=0 - -# -# Configure Command Options -# -CONFIG_NSH_CODECS_BUFSIZE=128 -# CONFIG_NSH_CMDOPT_HEXDUMP is not set -CONFIG_NSH_FILEIOSIZE=64 - -# -# Scripting Support -# -CONFIG_NSH_DISABLESCRIPT=y - -# -# Console Configuration -# -CONFIG_NSH_CONSOLE=y -# CONFIG_NSH_ALTCONDEV is not set -# CONFIG_NSH_ARCHINIT is not set -# CONFIG_NSH_LOGIN is not set -# CONFIG_NSH_CONSOLE_LOGIN is not set - -# -# NxWidgets/NxWM -# - -# -# Platform-specific Support -# -# CONFIG_PLATFORM_CONFIGDATA is not set - -# -# System Libraries and NSH Add-Ons -# -# CONFIG_SYSTEM_CLE is not set -# CONFIG_SYSTEM_CUTERM is not set -# CONFIG_SYSTEM_FREE is not set -# CONFIG_SYSTEM_HEX2BIN is not set -# CONFIG_SYSTEM_HEXED is not set -# CONFIG_SYSTEM_INSTALL is not set -# CONFIG_SYSTEM_RAMTEST is not set -CONFIG_READLINE_HAVE_EXTMATCH=y -CONFIG_SYSTEM_READLINE=y -CONFIG_READLINE_ECHO=y -# CONFIG_READLINE_TABCOMPLETION is not set -# CONFIG_READLINE_CMD_HISTORY is not set -# CONFIG_SYSTEM_SUDOKU is not set -# CONFIG_SYSTEM_UBLOXMODEM is not set -# CONFIG_SYSTEM_VI is not set -# CONFIG_SYSTEM_ZMODEM is not set diff --git a/configs/stm32f103-minimum/minnsh/setenv.sh b/configs/stm32f103-minimum/minnsh/setenv.sh deleted file mode 100644 index 73dfab5a4d0..00000000000 --- a/configs/stm32f103-minimum/minnsh/setenv.sh +++ /dev/null @@ -1,100 +0,0 @@ -#!/bin/bash -# configs//stm32f103-minimum/nsh/setenv.sh -# -# Copyright (C) 2016 Gregory Nutt. All rights reserved. -# Author: Gregory Nutt -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in -# the documentation and/or other materials provided with the -# distribution. -# 3. Neither the name NuttX nor the names of its contributors may be -# used to endorse or promote products derived from this software -# without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE -# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, -# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, -# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS -# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED -# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN -# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -# POSSIBILITY OF SUCH DAMAGE. -# - -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in -# the documentation and/or other materials provided with the -# distribution. -# 3. Neither the name NuttX nor the names of its contributors may be -# used to endorse or promote products derived from this software -# without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE -# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, -# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, -# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS -# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED -# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN -# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -# POSSIBILITY OF SUCH DAMAGE. -# - -if [ "$_" = "$0" ] ; then - echo "You must source this script, not run it!" 1>&2 - exit 1 -fi - -WD=`pwd` -if [ ! -x "setenv.sh" ]; then - echo "This script must be executed from the top-level NuttX build directory" - exit 1 -fi - -if [ -z "${PATH_ORIG}" ]; then - export PATH_ORIG="${PATH}" -fi - -# This is the Cygwin path to the location where I installed the CodeSourcery -# toolchain under windows. You will also have to edit this if you install -# the CodeSourcery toolchain in any other location -#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin" -#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery_CodeBench_Lite_for_ARM_EABI/bin" -# export TOOLCHAIN_BIN="/cygdrive/c/Users/MyName/MentorGraphics/Sourcery_CodeBench_Lite_for_ARM_EABI/bin" - -# This is the location where I installed the ARM "GNU Tools for ARM Embedded Processors" -# You can this free toolchain here https://launchpad.net/gcc-arm-embedded -export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/GNU Tools ARM Embedded/4.9 2015q2/bin" - -# This is the path to the location where I installed the devkitARM toolchain -# You can get this free toolchain from http://devkitpro.org/ or http://sourceforge.net/projects/devkitpro/ -#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/devkitARM/bin" - -# This is the Cygwin path to the location where I build the buildroot -# toolchain. -# export TOOLCHAIN_BIN="${WD}/../buildroot/build_arm_nofpu/staging_dir/bin" - -# Add the path to the toolchain to the PATH varialble -export PATH="${TOOLCHAIN_BIN}:/sbin:/usr/sbin:${PATH_ORIG}" - -echo "PATH : ${PATH}" diff --git a/configs/stm32f429i-disco/ide/ltcd/uvision/libc.uvproj b/configs/stm32f429i-disco/ide/ltcd/uvision/libc.uvproj index f7340f2ce7f..97ded008652 100644 --- a/configs/stm32f429i-disco/ide/ltcd/uvision/libc.uvproj +++ b/configs/stm32f429i-disco/ide/ltcd/uvision/libc.uvproj @@ -915,11 +915,6 @@ 1 ../../../../../libc/stdio/lib_memsostream.c - - lib_lowinstream.c - 1 - ../../../../../libc/stdio/lib_lowinstream.c - lib_lowoutstream.c 1 diff --git a/include/nuttx/arch.h b/include/nuttx/arch.h index 4affda90da9..22b5ebb337f 100644 --- a/include/nuttx/arch.h +++ b/include/nuttx/arch.h @@ -2300,16 +2300,6 @@ xcpt_t arch_phy_irq(FAR const char *intf, xcpt_t handler, phy_enable_t *enable); int up_putc(int ch); -/**************************************************************************** - * Name: up_getc - * - * Description: - * Get one character on the console - * - ****************************************************************************/ - -int up_getc(void); - /**************************************************************************** * Name: up_puts * diff --git a/include/nuttx/streams.h b/include/nuttx/streams.h index ffbcffc9ec5..eb7ad678449 100644 --- a/include/nuttx/streams.h +++ b/include/nuttx/streams.h @@ -299,15 +299,13 @@ void lib_rawsistream(FAR struct lib_rawsistream_s *instream, int fd); void lib_rawsostream(FAR struct lib_rawsostream_s *outstream, int fd); /**************************************************************************** - * Name: lib_lowinstream, lib_lowoutstream + * Name: lib_lowoutstream * * Description: - * Initializes a stream for use with low-level, architecture-specific I/O. - * Defined in lib/stdio/lib_lowinstream.c and lib/stdio/lib_lowoutstream.c + * Initializes a stream for use with low-level, architecture-specific output. + * Defined in ib/stdio/lib_lowoutstream.c * * Input parameters: - * lowinstream - User allocated, uninitialized instance of struct - * lib_lowinstream_s to be initialized. * lowoutstream - User allocated, uninitialized instance of struct * lib_lowoutstream_s to be initialized. * @@ -316,9 +314,6 @@ void lib_rawsostream(FAR struct lib_rawsostream_s *outstream, int fd); * ****************************************************************************/ -#ifdef CONFIG_ARCH_LOWGETC -void lib_lowinstream(FAR struct lib_instream_s *lowinstream); -#endif #ifdef CONFIG_ARCH_LOWPUTC void lib_lowoutstream(FAR struct lib_outstream_s *lowoutstream); #endif diff --git a/libc/stdio/Make.defs b/libc/stdio/Make.defs index f308266d656..f6220671c9d 100644 --- a/libc/stdio/Make.defs +++ b/libc/stdio/Make.defs @@ -41,7 +41,7 @@ CSRCS += lib_fileno.c lib_printf.c lib_sprintf.c lib_asprintf.c CSRCS += lib_snprintf.c lib_libsprintf.c lib_vsprintf.c lib_vasprintf.c CSRCS += lib_vsnprintf.c lib_libvsprintf.c lib_dprintf.c lib_vdprintf.c CSRCS += lib_meminstream.c lib_memoutstream.c lib_memsistream.c -CSRCS += lib_memsostream.c lib_lowinstream.c lib_lowoutstream.c +CSRCS += lib_memsostream.c lib_lowoutstream.c CSRCS += lib_zeroinstream.c lib_nullinstream.c lib_nulloutstream.c CSRCS += lib_sscanf.c diff --git a/libc/stdio/lib_lowinstream.c b/libc/stdio/lib_lowinstream.c deleted file mode 100644 index ad3231784d5..00000000000 --- a/libc/stdio/lib_lowinstream.c +++ /dev/null @@ -1,102 +0,0 @@ -/**************************************************************************** - * libc/stdio/lib_lowinstream.c - * - * Copyright (C) 2007-2009, 2011-2012 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name NuttX nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************/ - -/**************************************************************************** - * Included Files - ****************************************************************************/ - -#include - -#include -#include -#include - -#include - -#include "libc.h" - -#ifdef CONFIG_ARCH_LOWGETC - -/**************************************************************************** - * Private Functions - ****************************************************************************/ - -/**************************************************************************** - * Name: lowinstream_getc - ****************************************************************************/ - -static int lowinstream_getc(FAR struct lib_instream_s *this) -{ - int ret; - - DEBUGASSERT(this); - - /* Get the next character from the incoming stream */ - - ret = up_getc(ch); - if (ret != EOF) - { - this->nget++; - } - - return ret; -} - -/**************************************************************************** - * Public Functions - ****************************************************************************/ - -/**************************************************************************** - * Name: lib_lowinstream - * - * Description: - * Initializes a stream for use with low-level, architecture-specific I/O. - * - * Input parameters: - * stream - User allocated, uninitialized instance of struct - * lib_lowinstream_s to be initialized. - * - * Returned Value: - * None (User allocated instance initialized). - * - ****************************************************************************/ - -void lib_lowinstream(FAR struct lib_instream_s *stream) -{ - stream->get = lowinstream_getc; - stream->nget = 0; -} - -#endif /* CONFIG_ARCH_LOWGETC */