mirror of
https://github.com/apache/nuttx.git
synced 2026-06-05 15:58:59 +08:00
Add framework for the STM3240G-EVAL board (not much logic yet)
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4118 42af7a65-404d-4744-a932-0658087f49c3
This commit is contained in:
patacongo
@@ -3,7 +3,7 @@
|
||||
* arch/arm/src/board/stm3210e_internal.n
|
||||
*
|
||||
* Copyright (C) 2009 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
@@ -49,9 +49,8 @@
|
||||
* Definitions
|
||||
************************************************************************************/
|
||||
|
||||
/* How many SPI modules does this chip support? The LM3S6918 supports 2 SPI
|
||||
* modules (others may support more -- in such case, the following must be
|
||||
* expanded).
|
||||
/* How many SPI modules does this chip support? Most support 2 SPI modules (others
|
||||
* may support more -- in such case, the following must be expanded).
|
||||
*/
|
||||
|
||||
#if STM32_NSPI < 1
|
||||
|
||||
Executable
+369
@@ -0,0 +1,369 @@
|
||||
README
|
||||
======
|
||||
|
||||
This README discusses issues unique to NuttX configurations for the
|
||||
STMicro STM32140G-EVAL development board.
|
||||
|
||||
Contents
|
||||
========
|
||||
|
||||
- Development Environment
|
||||
- GNU Toolchain Options
|
||||
- IDEs
|
||||
- NuttX buildroot Toolchain
|
||||
- STM3240G-EVAL-specific Configuration Options
|
||||
- Configurations
|
||||
|
||||
Development Environment
|
||||
=======================
|
||||
|
||||
Either Linux or Cygwin on Windows can be used for the development environment.
|
||||
The source has been built only using the GNU toolchain (see below). Other
|
||||
toolchains will likely cause problems. Testing was performed using the Cygwin
|
||||
environment because the Raisonance R-Link emulatator and some RIDE7 development tools
|
||||
were used and those tools works only under Windows.
|
||||
|
||||
GNU Toolchain Options
|
||||
=====================
|
||||
|
||||
The NuttX make system has been modified to support the following different
|
||||
toolchain options.
|
||||
|
||||
1. The CodeSourcery GNU toolchain,
|
||||
2. The devkitARM GNU toolchain,
|
||||
3. Raisonance GNU toolchain, or
|
||||
4. The NuttX buildroot Toolchain (see below).
|
||||
|
||||
All testing has been conducted using the CodeSourcery toolchain for Windows. To use
|
||||
the devkitARM, Raisonance GNU, or NuttX buildroot toolchain, you simply need to
|
||||
add one of the following configuration options to your .config (or defconfig)
|
||||
file:
|
||||
|
||||
CONFIG_STM32_CODESOURCERYW=y : CodeSourcery under Windows
|
||||
CONFIG_STM32_CODESOURCERYL=y : CodeSourcery under Linux
|
||||
CONFIG_STM32_DEVKITARM=y : devkitARM under Windows
|
||||
CONFIG_STM32_RAISONANCE=y : Raisonance RIDE7 under Windows
|
||||
CONFIG_STM32_BUILDROOT=y : NuttX buildroot under Linux or Cygwin (default)
|
||||
|
||||
If you change the default toolchain, then you may also have to modify the PATH in
|
||||
the setenv.h file if your make cannot find the tools.
|
||||
|
||||
NOTE: the CodeSourcery (for Windows), devkitARM, and Raisonance toolchains are
|
||||
Windows native toolchains. The CodeSourcey (for Linux) and NuttX buildroot
|
||||
toolchains are Cygwin and/or Linux native toolchains. There are several limitations
|
||||
to using a Windows based toolchain in a Cygwin environment. The three biggest are:
|
||||
|
||||
1. The Windows toolchain cannot follow Cygwin paths. Path conversions are
|
||||
performed automatically in the Cygwin makefiles using the 'cygpath' utility
|
||||
but you might easily find some new path problems. If so, check out 'cygpath -w'
|
||||
|
||||
2. Windows toolchains cannot follow Cygwin symbolic links. Many symbolic links
|
||||
are used in Nuttx (e.g., include/arch). The make system works around these
|
||||
problems for the Windows tools by copying directories instead of linking them.
|
||||
But this can also cause some confusion for you: For example, you may edit
|
||||
a file in a "linked" directory and find that your changes had no effect.
|
||||
That is because you are building the copy of the file in the "fake" symbolic
|
||||
directory. If you use a Windows toolchain, you should get in the habit of
|
||||
making like this:
|
||||
|
||||
make clean_context all
|
||||
|
||||
An alias in your .bashrc file might make that less painful.
|
||||
|
||||
3. Dependencies are not made when using Windows versions of the GCC. This is
|
||||
because the dependencies are generated using Windows pathes which do not
|
||||
work with the Cygwin make.
|
||||
|
||||
Support has been added for making dependencies with the windows-native toolchains.
|
||||
That support can be enabled by modifying your Make.defs file as follows:
|
||||
|
||||
- MKDEP = $(TOPDIR)/tools/mknulldeps.sh
|
||||
+ MKDEP = $(TOPDIR)/tools/mkdeps.sh --winpaths "$(TOPDIR)"
|
||||
|
||||
If you have problems with the dependency build (for example, if you are not
|
||||
building on C:), then you may need to modify tools/mkdeps.sh
|
||||
|
||||
NOTE 1: The CodeSourcery toolchain (2009q1) does not work with default optimization
|
||||
level of -Os (See Make.defs). It will work with -O0, -O1, or -O2, but not with
|
||||
-Os.
|
||||
|
||||
NOTE 2: The devkitARM toolchain includes a version of MSYS make. Make sure that
|
||||
the paths to Cygwin's /bin and /usr/bin directories appear BEFORE the devkitARM
|
||||
path or will get the wrong version of make.
|
||||
|
||||
IDEs
|
||||
====
|
||||
|
||||
NuttX is built using command-line make. It can be used with an IDE, but some
|
||||
effort will be required to create the project.
|
||||
|
||||
Makefile Build
|
||||
--------------
|
||||
Under Eclipse, it is pretty easy to set up an "empty makefile project" and
|
||||
simply use the NuttX makefile to build the system. That is almost for free
|
||||
under Linux. Under Windows, you will need to set up the "Cygwin GCC" empty
|
||||
makefile project in order to work with Windows (Google for "Eclipse Cygwin" -
|
||||
there is a lot of help on the internet).
|
||||
|
||||
Native Build
|
||||
------------
|
||||
Here are a few tips before you start that effort:
|
||||
|
||||
1) Select the toolchain that you will be using in your .config file
|
||||
2) Start the NuttX build at least one time from the Cygwin command line
|
||||
before trying to create your project. This is necessary to create
|
||||
certain auto-generated files and directories that will be needed.
|
||||
3) Set up include pathes: You will need include/, arch/arm/src/stm32,
|
||||
arch/arm/src/common, arch/arm/src/armv7-m, and sched/.
|
||||
4) All assembly files need to have the definition option -D __ASSEMBLY__
|
||||
on the command line.
|
||||
|
||||
Startup files will probably cause you some headaches. The NuttX startup file
|
||||
is arch/arm/src/stm32/stm32_vectors.S. With RIDE, I have to build NuttX
|
||||
one time from the Cygwin command line in order to obtain the pre-built
|
||||
startup object needed by RIDE.
|
||||
|
||||
NuttX buildroot Toolchain
|
||||
=========================
|
||||
|
||||
A GNU GCC-based toolchain is assumed. The files */setenv.sh should
|
||||
be modified to point to the correct path to the Cortex-M3 GCC toolchain (if
|
||||
different from the default in your PATH variable).
|
||||
|
||||
If you have no Cortex-M3 toolchain, one can be downloaded from the NuttX
|
||||
SourceForge download site (https://sourceforge.net/project/showfiles.php?group_id=189573).
|
||||
This GNU toolchain builds and executes in the Linux or Cygwin environment.
|
||||
|
||||
1. You must have already configured Nuttx in <some-dir>/nuttx.
|
||||
|
||||
cd tools
|
||||
./configure.sh stm3240g-eval/<sub-dir>
|
||||
|
||||
2. Download the latest buildroot package into <some-dir>
|
||||
|
||||
3. unpack the buildroot tarball. The resulting directory may
|
||||
have versioning information on it like buildroot-x.y.z. If so,
|
||||
rename <some-dir>/buildroot-x.y.z to <some-dir>/buildroot.
|
||||
|
||||
4. cd <some-dir>/buildroot
|
||||
|
||||
5. cp configs/cortexm3-defconfig-4.3.3 .config
|
||||
|
||||
6. make oldconfig
|
||||
|
||||
7. make
|
||||
|
||||
8. Edit setenv.h, if necessary, so that the PATH variable includes
|
||||
the path to the newly built binaries.
|
||||
|
||||
See the file configs/README.txt in the buildroot source tree. That has more
|
||||
detailed PLUS some special instructions that you will need to follow if you are
|
||||
building a Cortex-M3 toolchain for Cygwin under Windows.
|
||||
|
||||
STM3240G-EVAL-specific Configuration Options
|
||||
============================================
|
||||
|
||||
CONFIG_ARCH - Identifies the arch/ subdirectory. This should
|
||||
be set to:
|
||||
|
||||
CONFIG_ARCH=arm
|
||||
|
||||
CONFIG_ARCH_family - For use in C code:
|
||||
|
||||
CONFIG_ARCH_ARM=y
|
||||
|
||||
CONFIG_ARCH_architecture - For use in C code:
|
||||
|
||||
CONFIG_ARCH_CORTEXM4=y
|
||||
|
||||
CONFIG_ARCH_CHIP - Identifies the arch/*/chip subdirectory
|
||||
|
||||
CONFIG_ARCH_CHIP=stm32
|
||||
|
||||
CONFIG_ARCH_CHIP_name - For use in C code to identify the exact
|
||||
chip:
|
||||
|
||||
CONFIG_ARCH_CHIP_STM32F407IG=y
|
||||
|
||||
CONFIG_ARCH_BOARD_STM32_CUSTOM_CLOCKCONFIG - Enables special STM32 clock
|
||||
configuration features.
|
||||
|
||||
CONFIG_ARCH_BOARD_STM32_CUSTOM_CLOCKCONFIG=n
|
||||
|
||||
CONFIG_ARCH_BOARD - Identifies the configs subdirectory and
|
||||
hence, the board that supports the particular chip or SoC.
|
||||
|
||||
CONFIG_ARCH_BOARD=stm3240g_eval (for the STM3240G-EVAL development board)
|
||||
|
||||
CONFIG_ARCH_BOARD_name - For use in C code
|
||||
|
||||
CONFIG_ARCH_BOARD_STM3240G_EVAL=y
|
||||
|
||||
CONFIG_ARCH_LOOPSPERMSEC - Must be calibrated for correct operation
|
||||
of delay loops
|
||||
|
||||
CONFIG_ENDIAN_BIG - define if big endian (default is little
|
||||
endian)
|
||||
|
||||
CONFIG_DRAM_SIZE - Describes the installed DRAM (SRAM in this case):
|
||||
|
||||
CONFIG_DRAM_SIZE=0x00010000 (64Kb)
|
||||
|
||||
CONFIG_DRAM_START - The start address of installed DRAM
|
||||
|
||||
CONFIG_DRAM_START=0x20000000
|
||||
|
||||
CONFIG_DRAM_END - Last address+1 of installed RAM
|
||||
|
||||
CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE)
|
||||
|
||||
CONFIG_ARCH_IRQPRIO - The STM3240xxx supports interrupt prioritization
|
||||
|
||||
CONFIG_ARCH_IRQPRIO=y
|
||||
|
||||
CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to boards that
|
||||
have LEDs
|
||||
|
||||
CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt
|
||||
stack. If defined, this symbol is the size of the interrupt
|
||||
stack in bytes. If not defined, the user task stacks will be
|
||||
used during interrupt handling.
|
||||
|
||||
CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions
|
||||
|
||||
CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to board architecture.
|
||||
|
||||
CONFIG_ARCH_CALIBRATION - Enables some build in instrumentation that
|
||||
cause a 100 second delay during boot-up. This 100 second delay
|
||||
serves no purpose other than it allows you to calibratre
|
||||
CONFIG_ARCH_LOOPSPERMSEC. You simply use a stop watch to measure
|
||||
the 100 second delay then adjust CONFIG_ARCH_LOOPSPERMSEC until
|
||||
the delay actually is 100 seconds.
|
||||
|
||||
Individual subsystems can be enabled:
|
||||
|
||||
AHB1
|
||||
----
|
||||
CONFIG_STM32_CRC
|
||||
CONFIG_STM32_BKPSRAM
|
||||
CONFIG_STM32_CCMDATARAM
|
||||
CONFIG_STM32_DMA1
|
||||
CONFIG_STM32_DMA2
|
||||
CONFIG_STM32_ETHMAC
|
||||
CONFIG_STM32_OTGHS
|
||||
|
||||
AHB2
|
||||
----
|
||||
CONFIG_STM32_DCMI
|
||||
CONFIG_STM32_CRYP
|
||||
CONFIG_STM32_HASH
|
||||
CONFIG_STM32_RNG
|
||||
CONFIG_STM32_OTGFS
|
||||
|
||||
AHB3
|
||||
----
|
||||
CONFIG_STM32_FSMC
|
||||
|
||||
APB1
|
||||
----
|
||||
CONFIG_STM32_TIM2
|
||||
CONFIG_STM32_TIM3
|
||||
CONFIG_STM32_TIM4
|
||||
CONFIG_STM32_TIM5
|
||||
CONFIG_STM32_TIM6
|
||||
CONFIG_STM32_TIM7
|
||||
CONFIG_STM32_TIM12
|
||||
CONFIG_STM32_TIM13
|
||||
CONFIG_STM32_TIM14
|
||||
CONFIG_STM32_WWDG
|
||||
CONFIG_STM32_SPI2
|
||||
CONFIG_STM32_SPI3
|
||||
CONFIG_STM32_USART2
|
||||
CONFIG_STM32_USART3
|
||||
CONFIG_STM32_UART4
|
||||
CONFIG_STM32_UART5
|
||||
CONFIG_STM32_I2C1
|
||||
CONFIG_STM32_I2C2
|
||||
CONFIG_STM32_I2C3
|
||||
CONFIG_STM32_CAN1
|
||||
CONFIG_STM32_CAN2
|
||||
CONFIG_STM32_PWR
|
||||
CONFIG_STM32_DAC
|
||||
|
||||
APB2
|
||||
----
|
||||
CONFIG_STM32_TIM1
|
||||
CONFIG_STM32_TIM8
|
||||
CONFIG_STM32_USART1
|
||||
CONFIG_STM32_USART6
|
||||
CONFIG_STM32_ADC1
|
||||
CONFIG_STM32_ADC2
|
||||
CONFIG_STM32_ADC3
|
||||
CONFIG_STM32_SDIO
|
||||
CONFIG_STM32_SPI1
|
||||
CONFIG_STM32_SYSCFG
|
||||
CONFIG_STM32_TIM9
|
||||
CONFIG_STM32_TIM10
|
||||
CONFIG_STM32_TIM11
|
||||
|
||||
Timer and I2C devices may need to the following to force power to be applied
|
||||
unconditionally at power up. (Otherwise, the device is powered when it is
|
||||
initialized).
|
||||
|
||||
CONFIG_STM32_FORCEPOWER
|
||||
|
||||
JTAG Enable settings (by default JTAG-DP and SW-DP are disabled):
|
||||
CONFIG_STM32_JTAG_FULL_ENABLE - Enables full SWJ (JTAG-DP + SW-DP)
|
||||
CONFIG_STM32_JTAG_NOJNTRST_ENABLE - Enables full SWJ (JTAG-DP + SW-DP)
|
||||
but without JNTRST.
|
||||
CONFIG_STM32_JTAG_SW_ENABLE - Set JTAG-DP disabled and SW-DP enabled
|
||||
|
||||
STM3240xxx specific device driver settings
|
||||
|
||||
CONFIG_U[S]ARTn_SERIAL_CONSOLE - selects the USARTn (n=1,2,3) or UART
|
||||
m (m=4,5) for the console and ttys0 (default is the USART1).
|
||||
CONFIG_U[S]ARTn_RXBUFSIZE - Characters are buffered as received.
|
||||
This specific the size of the receive buffer
|
||||
CONFIG_U[S]ARTn_TXBUFSIZE - Characters are buffered before
|
||||
being sent. This specific the size of the transmit buffer
|
||||
CONFIG_U[S]ARTn_BAUD - The configure BAUD of the UART. Must be
|
||||
CONFIG_U[S]ARTn_BITS - The number of bits. Must be either 7 or 8.
|
||||
CONFIG_U[S]ARTn_PARTIY - 0=no parity, 1=odd parity, 2=even parity
|
||||
CONFIG_U[S]ARTn_2STOP - Two stop bits
|
||||
|
||||
CONFIG_STM32_SPI_INTERRUPTS - Select to enable interrupt driven SPI
|
||||
support. Non-interrupt-driven, poll-waiting is recommended if the
|
||||
interrupt rate would be to high in the interrupt driven case.
|
||||
CONFIG_STM32_SPI_DMA - Use DMA to improve SPI transfer performance.
|
||||
Cannot be used with CONFIG_STM32_SPI_INTERRUPT.
|
||||
|
||||
CONFIG_SDIO_DMA - Support DMA data transfers. Requires CONFIG_STM32_SDIO
|
||||
and CONFIG_STM32_DMA2.
|
||||
CONFIG_SDIO_PRI - Select SDIO interrupt prority. Default: 128
|
||||
CONFIG_SDIO_DMAPRIO - Select SDIO DMA interrupt priority.
|
||||
Default: Medium
|
||||
CONFIG_SDIO_WIDTH_D1_ONLY - Select 1-bit transfer mode. Default:
|
||||
4-bit transfer mode.
|
||||
|
||||
STM3240G-EVAL LCD Hardware Configuration
|
||||
|
||||
Configurations
|
||||
==============
|
||||
|
||||
Each STM3240G-EVAL configuration is maintained in a sudirectory and
|
||||
can be selected as follow:
|
||||
|
||||
cd tools
|
||||
./configure.sh stm3240g-eval/<subdir>
|
||||
cd -
|
||||
. ./setenv.sh
|
||||
|
||||
Where <subdir> is one of the following:
|
||||
|
||||
ostest:
|
||||
------
|
||||
This configuration directory, performs a simple OS test using
|
||||
examples/ostest. By default, this project assumes that you are
|
||||
using the DFU bootloader.
|
||||
|
||||
CONFIG_STM32_BUILDROOT=y : CodeSourcery under Windows
|
||||
Executable
+214
@@ -0,0 +1,214 @@
|
||||
/************************************************************************************
|
||||
* configs/stm3240g-eval/include/board.h
|
||||
* include/arch/board/board.h
|
||||
*
|
||||
* Copyright (C) 2009 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
#ifndef __ARCH_BOARD_BOARD_H
|
||||
#define __ARCH_BOARD_BOARD_H
|
||||
|
||||
/************************************************************************************
|
||||
* Included Files
|
||||
************************************************************************************/
|
||||
|
||||
#include <nuttx/config.h>
|
||||
#ifndef __ASSEMBLY__
|
||||
# include <stdint.h>
|
||||
#endif
|
||||
#include "stm32_rcc.h"
|
||||
#include "stm32_sdio.h"
|
||||
#include "stm32_internal.h"
|
||||
|
||||
/************************************************************************************
|
||||
* Definitions
|
||||
************************************************************************************/
|
||||
|
||||
/* Clocking *************************************************************************/
|
||||
#warning "Revisit -- this is from the STM3210E-EVAL"
|
||||
|
||||
/* On-board crystal frequency is 8MHz (HSE) */
|
||||
|
||||
#define STM32_BOARD_XTAL 8000000ul
|
||||
|
||||
/* PLL source is HSE/1, PLL multipler is 9: PLL frequency is 8MHz (XTAL) x 9 = 72MHz */
|
||||
|
||||
#define STM32_CFGR_PLLSRC RCC_CFGR_PLLSRC
|
||||
#define STM32_CFGR_PLLXTPRE 0
|
||||
#define STM32_CFGR_PLLMUL RCC_CFGR_PLLMUL_CLKx9
|
||||
#define STM32_PLL_FREQUENCY (9*STM32_BOARD_XTAL)
|
||||
|
||||
/* Use the PLL and set the SYSCLK source to be the PLL */
|
||||
|
||||
#define STM32_SYSCLK_SW RCC_CFGR_SW_PLL
|
||||
#define STM32_SYSCLK_SWS RCC_CFGR_SWS_PLL
|
||||
#define STM32_SYSCLK_FREQUENCY STM32_PLL_FREQUENCY
|
||||
|
||||
/* AHB clock (HCLK) is SYSCLK (72MHz) */
|
||||
|
||||
#define STM32_RCC_CFGR_HPRE RCC_CFGR_HPRE_SYSCLK
|
||||
#define STM32_HCLK_FREQUENCY STM32_PLL_FREQUENCY
|
||||
#define STM32_BOARD_HCLK STM32_HCLK_FREQUENCY /* same as above, to satisfy compiler */
|
||||
|
||||
/* APB2 clock (PCLK2) is HCLK (72MHz) */
|
||||
|
||||
#define STM32_RCC_CFGR_PPRE2 RCC_CFGR_PPRE2_HCLK
|
||||
#define STM32_PCLK2_FREQUENCY STM32_HCLK_FREQUENCY
|
||||
|
||||
/* APB1 clock (PCLK1) is HCLK/2 (36MHz) */
|
||||
|
||||
#define STM32_RCC_CFGR_PPRE1 RCC_CFGR_PPRE1_HCLKd2
|
||||
#define STM32_PCLK1_FREQUENCY (STM32_HCLK_FREQUENCY/2)
|
||||
|
||||
/* USB divider -- Divide PLL clock by 1.5 */
|
||||
|
||||
#define STM32_CFGR_USBPRE 0
|
||||
|
||||
/* Timer Frequencies, if APBx is set to 1, frequency is same to APBx
|
||||
* otherwise frequency is 2xAPBx.
|
||||
* Note: TIM1,8 are on APB2, others on APB1 */
|
||||
|
||||
#define STM32_TIM18_FREQUENCY STM32_HCLK_FREQUENCY
|
||||
#define STM32_TIM27_FREQUENCY STM32_HCLK_FREQUENCY
|
||||
|
||||
/* SDIO dividers. Note that slower clocking is required when DMA is disabled
|
||||
* in order to avoid RX overrun/TX underrun errors due to delayed responses
|
||||
* to service FIFOs in interrupt driven mode. These values have not been
|
||||
* tuned!!!
|
||||
*
|
||||
* HCLK=72MHz, SDIOCLK=72MHz, SDIO_CK=HCLK/(178+2)=400 KHz
|
||||
*/
|
||||
|
||||
#define SDIO_INIT_CLKDIV (178 << SDIO_CLKCR_CLKDIV_SHIFT)
|
||||
|
||||
/* DMA ON: HCLK=72 MHz, SDIOCLK=72MHz, SDIO_CK=HCLK/(2+2)=18 MHz
|
||||
* DMA OFF: HCLK=72 MHz, SDIOCLK=72MHz, SDIO_CK=HCLK/(3+2)=14.4 MHz
|
||||
*/
|
||||
|
||||
#ifdef CONFIG_SDIO_DMA
|
||||
# define SDIO_MMCXFR_CLKDIV (2 << SDIO_CLKCR_CLKDIV_SHIFT)
|
||||
#else
|
||||
# define SDIO_MMCXFR_CLKDIV (3 << SDIO_CLKCR_CLKDIV_SHIFT)
|
||||
#endif
|
||||
|
||||
/* DMA ON: HCLK=72 MHz, SDIOCLK=72MHz, SDIO_CK=HCLK/(1+2)=24 MHz
|
||||
* DMA OFF: HCLK=72 MHz, SDIOCLK=72MHz, SDIO_CK=HCLK/(3+2)=14.4 MHz
|
||||
*/
|
||||
|
||||
#ifdef CONFIG_SDIO_DMA
|
||||
# define SDIO_SDXFR_CLKDIV (1 << SDIO_CLKCR_CLKDIV_SHIFT)
|
||||
#else
|
||||
# define SDIO_SDXFR_CLKDIV (3 << SDIO_CLKCR_CLKDIV_SHIFT)
|
||||
#endif
|
||||
|
||||
/* LED definitions ******************************************************************/
|
||||
|
||||
#define LED_STARTED 0
|
||||
#define LED_HEAPALLOCATE 1
|
||||
#define LED_IRQSENABLED 2
|
||||
#define LED_STACKCREATED 3
|
||||
#define LED_INIRQ 4
|
||||
#define LED_SIGNAL 5
|
||||
#define LED_ASSERTION 6
|
||||
#define LED_PANIC 7
|
||||
|
||||
/* The STM3240G-EVAL supports several buttons */
|
||||
|
||||
#warning "Missing logic"
|
||||
|
||||
/************************************************************************************
|
||||
* Public Data
|
||||
************************************************************************************/
|
||||
|
||||
#ifndef __ASSEMBLY__
|
||||
|
||||
#undef EXTERN
|
||||
#if defined(__cplusplus)
|
||||
#define EXTERN extern "C"
|
||||
extern "C" {
|
||||
#else
|
||||
#define EXTERN extern
|
||||
#endif
|
||||
|
||||
/************************************************************************************
|
||||
* Public Function Prototypes
|
||||
************************************************************************************/
|
||||
/************************************************************************************
|
||||
* Name: stm32_boardinitialize
|
||||
*
|
||||
* Description:
|
||||
* All STM32 architectures must provide the following entry point. This entry point
|
||||
* is called early in the intitialization -- after all memory has been configured
|
||||
* and mapped but before any devices have been initialized.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
EXTERN void stm32_boardinitialize(void);
|
||||
|
||||
/************************************************************************************
|
||||
* Button support.
|
||||
*
|
||||
* Description:
|
||||
* up_buttoninit() must be called to initialize button resources. After
|
||||
* that, up_buttons() may be called to collect the current state of all
|
||||
* buttons or up_irqbutton() may be called to register button interrupt
|
||||
* handlers.
|
||||
*
|
||||
* After up_buttoninit() has been called, up_buttons() may be called to
|
||||
* collect the state of all buttons. up_buttons() returns an 8-bit bit set
|
||||
* with each bit associated with a button. See the BUTTON_*_BIT
|
||||
* definitions in board.h for the meaning of each bit.
|
||||
*
|
||||
* up_irqbutton() may be called to register an interrupt handler that will
|
||||
* be called when a button is depressed or released. The ID value is a
|
||||
* button enumeration value that uniquely identifies a button resource. See the
|
||||
* BUTTON_* definitions in board.h for the meaning of enumeration
|
||||
* value. The previous interrupt handler address is returned (so that it may
|
||||
* restored, if so desired).
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
#ifdef CONFIG_ARCH_BUTTONS
|
||||
EXTERN void up_buttoninit(void);
|
||||
EXTERN uint8_t up_buttons(void);
|
||||
#ifdef CONFIG_ARCH_IRQBUTTONS
|
||||
EXTERN xcpt_t up_irqbutton(int id, xcpt_t irqhandler);
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#undef EXTERN
|
||||
#if defined(__cplusplus)
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __ASSEMBLY__ */
|
||||
#endif /* __ARCH_BOARD_BOARD_H */
|
||||
@@ -0,0 +1,170 @@
|
||||
############################################################################
|
||||
# configs/stm3240g-eval/ostest/Make.defs
|
||||
#
|
||||
# Copyright (C) 2011 Gregory Nutt. All rights reserved.
|
||||
# Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions
|
||||
# are met:
|
||||
#
|
||||
# 1. Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# 2. Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in
|
||||
# the documentation and/or other materials provided with the
|
||||
# distribution.
|
||||
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||
# used to endorse or promote products derived from this software
|
||||
# without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
# POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
############################################################################
|
||||
|
||||
include ${TOPDIR}/.config
|
||||
|
||||
# Setup for the selected toolchain
|
||||
|
||||
ifeq ($(CONFIG_STM32_CODESOURCERYW),y)
|
||||
# CodeSourcery under Windows
|
||||
CROSSDEV = arm-none-eabi-
|
||||
WINTOOL = y
|
||||
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
|
||||
endif
|
||||
ifeq ($(CONFIG_STM32_CODESOURCERYL),y)
|
||||
# CodeSourcery under Linux
|
||||
CROSSDEV = arm-none-eabi-
|
||||
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
|
||||
MAXOPTIMIZATION = -O2
|
||||
endif
|
||||
ifeq ($(CONFIG_STM32_DEVKITARM),y)
|
||||
# devkitARM under Windows
|
||||
CROSSDEV = arm-eabi-
|
||||
WINTOOL = y
|
||||
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
|
||||
endif
|
||||
ifeq ($(CONFIG_STM32_RAISONANCE),y)
|
||||
# Raisonance RIDE7 under Windows
|
||||
CROSSDEV = arm-none-eabi-
|
||||
WINTOOL = y
|
||||
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
|
||||
endif
|
||||
ifeq ($(CONFIG_STM32_BUILDROOT),y)
|
||||
# NuttX buildroot under Linux or Cygwin
|
||||
CROSSDEV = arm-elf-
|
||||
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
|
||||
MAXOPTIMIZATION = -Os
|
||||
endif
|
||||
|
||||
LDSCRIPT = ld.script
|
||||
|
||||
ifeq ($(WINTOOL),y)
|
||||
# Windows-native toolchains
|
||||
DIRLINK = $(TOPDIR)/tools/winlink.sh
|
||||
DIRUNLINK = $(TOPDIR)/tools/unlink.sh
|
||||
MKDEP = $(TOPDIR)/tools/mknulldeps.sh
|
||||
ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
|
||||
ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
|
||||
ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/ostest/$(LDSCRIPT)}"
|
||||
MAXOPTIMIZATION = -O2
|
||||
else
|
||||
# Linux/Cygwin-native toolchain
|
||||
MKDEP = $(TOPDIR)/tools/mkdeps.sh
|
||||
ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
|
||||
ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
|
||||
ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/ostest/$(LDSCRIPT)
|
||||
endif
|
||||
|
||||
CC = $(CROSSDEV)gcc
|
||||
CXX = $(CROSSDEV)g++
|
||||
CPP = $(CROSSDEV)gcc -E
|
||||
LD = $(CROSSDEV)ld
|
||||
AR = $(CROSSDEV)ar rcs
|
||||
NM = $(CROSSDEV)nm
|
||||
OBJCOPY = $(CROSSDEV)objcopy
|
||||
OBJDUMP = $(CROSSDEV)objdump
|
||||
|
||||
ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'}
|
||||
ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1}
|
||||
|
||||
ifeq ("${CONFIG_DEBUG_SYMBOLS}","y")
|
||||
ARCHOPTIMIZATION = -g
|
||||
else
|
||||
ARCHOPTIMIZATION = $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer
|
||||
endif
|
||||
|
||||
ARCHCFLAGS = -fno-builtin
|
||||
ARCHCXXFLAGS = -fno-builtin -fno-exceptions -fno-rtti
|
||||
ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow
|
||||
ARCHWARNINGSXX = -Wall -Wshadow
|
||||
ARCHDEFINES =
|
||||
ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10
|
||||
|
||||
CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
|
||||
CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
|
||||
CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
|
||||
CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
|
||||
CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES)
|
||||
AFLAGS = $(CFLAGS) -D__ASSEMBLY__
|
||||
|
||||
NXFLATLDFLAGS1 = -r -d -warn-common
|
||||
NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat.ld -no-check-sections
|
||||
LDNXFLATFLAGS = -e main -s 2048
|
||||
|
||||
OBJEXT = .o
|
||||
LIBEXT = .a
|
||||
EXEEXT =
|
||||
|
||||
ifneq ($(CROSSDEV),arm-elf-)
|
||||
LDFLAGS += -nostartfiles -nodefaultlibs
|
||||
endif
|
||||
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
|
||||
LDFLAGS += -g
|
||||
endif
|
||||
|
||||
define PREPROCESS
|
||||
@echo "CPP: $1->$2"
|
||||
@$(CPP) $(CPPFLAGS) $1 -o $2
|
||||
endef
|
||||
|
||||
define COMPILE
|
||||
@echo "CC: $1"
|
||||
@$(CC) -c $(CFLAGS) $1 -o $2
|
||||
endef
|
||||
|
||||
define COMPILEXX
|
||||
@echo "CXX: $1"
|
||||
@$(CXX) -c $(CXXFLAGS) $1 -o $2
|
||||
endef
|
||||
|
||||
define ASSEMBLE
|
||||
@echo "AS: $1"
|
||||
@$(CC) -c $(AFLAGS) $1 -o $2
|
||||
endef
|
||||
|
||||
define ARCHIVE
|
||||
echo "AR: $2"; \
|
||||
$(AR) $1 $2 || { echo "$(AR) $1 $2 FAILED!" ; exit 1 ; }
|
||||
endef
|
||||
|
||||
define CLEAN
|
||||
@rm -f *.o *.a
|
||||
endef
|
||||
|
||||
HOSTCC = gcc
|
||||
HOSTINCLUDES = -I.
|
||||
HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe
|
||||
HOSTLDFLAGS =
|
||||
|
||||
@@ -0,0 +1,39 @@
|
||||
############################################################################
|
||||
# configs/stm3240g-eval/ostest/appconfig
|
||||
#
|
||||
# Copyright (C) 2011 Gregory Nutt. All rights reserved.
|
||||
# Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions
|
||||
# are met:
|
||||
#
|
||||
# 1. Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# 2. Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in
|
||||
# the documentation and/or other materials provided with the
|
||||
# distribution.
|
||||
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||
# used to endorse or promote products derived from this software
|
||||
# without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
# POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
############################################################################
|
||||
|
||||
# Path to example in apps/examples containing the user_start entry point
|
||||
|
||||
CONFIGURED_APPS += examples/ostest
|
||||
|
||||
Executable
+892
File diff suppressed because it is too large
Load Diff
Executable
+118
@@ -0,0 +1,118 @@
|
||||
/****************************************************************************
|
||||
* configs/stm3240g-eval/ostest/ld.script
|
||||
*
|
||||
* Copyright (C) 2011 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
/* The STM32F103ZET6 has 1024Kb of FLASH beginning at address 0x0800:0000 and
|
||||
* 192Kb of SRAM. SRAM is split up into three blocks:
|
||||
*
|
||||
* 1) 112Kb of SRAM beginning at address 0x2000:0000
|
||||
* 2) 16Kb of SRAM beginning at address 0x2001:c000
|
||||
* 3) 64Kb of TCM SRAM beginning at address 0x1000:0000
|
||||
*
|
||||
* When booting from FLASH, FLASH memory is aliased to address 0x0000:0000
|
||||
* where the code expects to begin execution by jumping to the entry point in
|
||||
* the 0x0800:0000 address
|
||||
* range.
|
||||
*/
|
||||
|
||||
MEMORY
|
||||
{
|
||||
flash (rx) : ORIGIN = 0x08000000, LENGTH = 1024K
|
||||
sram (rwx) : ORIGIN = 0x20000000, LENGTH = 112K
|
||||
}
|
||||
|
||||
OUTPUT_ARCH(arm)
|
||||
ENTRY(_stext)
|
||||
SECTIONS
|
||||
{
|
||||
.text : {
|
||||
_stext = ABSOLUTE(.);
|
||||
*(.vectors)
|
||||
*(.text .text.*)
|
||||
*(.fixup)
|
||||
*(.gnu.warning)
|
||||
*(.rodata .rodata.*)
|
||||
*(.gnu.linkonce.t.*)
|
||||
*(.glue_7)
|
||||
*(.glue_7t)
|
||||
*(.got)
|
||||
*(.gcc_except_table)
|
||||
*(.gnu.linkonce.r.*)
|
||||
_etext = ABSOLUTE(.);
|
||||
} > flash
|
||||
|
||||
_eronly = ABSOLUTE(.);
|
||||
|
||||
/* The STM32F103Z has 64Kb of SRAM beginning at the following address */
|
||||
|
||||
.data : {
|
||||
_sdata = ABSOLUTE(.);
|
||||
*(.data .data.*)
|
||||
*(.gnu.linkonce.d.*)
|
||||
CONSTRUCTORS
|
||||
_edata = ABSOLUTE(.);
|
||||
} > sram AT > flash
|
||||
|
||||
.ARM.extab : {
|
||||
*(.ARM.extab*)
|
||||
} >sram
|
||||
|
||||
__exidx_start = ABSOLUTE(.);
|
||||
.ARM.exidx : {
|
||||
*(.ARM.exidx*)
|
||||
} >sram
|
||||
__exidx_end = ABSOLUTE(.);
|
||||
|
||||
.bss : {
|
||||
_sbss = ABSOLUTE(.);
|
||||
*(.bss .bss.*)
|
||||
*(.gnu.linkonce.b.*)
|
||||
*(COMMON)
|
||||
_ebss = ABSOLUTE(.);
|
||||
} > sram
|
||||
|
||||
/* Stabs debugging sections. */
|
||||
.stab 0 : { *(.stab) }
|
||||
.stabstr 0 : { *(.stabstr) }
|
||||
.stab.excl 0 : { *(.stab.excl) }
|
||||
.stab.exclstr 0 : { *(.stab.exclstr) }
|
||||
.stab.index 0 : { *(.stab.index) }
|
||||
.stab.indexstr 0 : { *(.stab.indexstr) }
|
||||
.comment 0 : { *(.comment) }
|
||||
.debug_abbrev 0 : { *(.debug_abbrev) }
|
||||
.debug_info 0 : { *(.debug_info) }
|
||||
.debug_line 0 : { *(.debug_line) }
|
||||
.debug_pubnames 0 : { *(.debug_pubnames) }
|
||||
.debug_aranges 0 : { *(.debug_aranges) }
|
||||
}
|
||||
Executable
+67
@@ -0,0 +1,67 @@
|
||||
#!/bin/bash
|
||||
# configs/stm3240g-eval/ostest/setenv.sh
|
||||
#
|
||||
# Copyright (C) 2011 Gregory Nutt. All rights reserved.
|
||||
# Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions
|
||||
# are met:
|
||||
#
|
||||
# 1. Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# 2. Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in
|
||||
# the documentation and/or other materials provided with the
|
||||
# distribution.
|
||||
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||
# used to endorse or promote products derived from this software
|
||||
# without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
# POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
|
||||
if [ "$_" = "$0" ] ; then
|
||||
echo "You must source this script, not run it!" 1>&2
|
||||
exit 1
|
||||
fi
|
||||
|
||||
WD=`pwd`
|
||||
if [ ! -x "setenv.sh" ]; then
|
||||
echo "This script must be executed from the top-level NuttX build directory"
|
||||
exit 1
|
||||
fi
|
||||
|
||||
if [ -z "${PATH_ORIG}" ]; then
|
||||
export PATH_ORIG="${PATH}"
|
||||
fi
|
||||
|
||||
# This the Cygwin path to the location where I installed the RIDE
|
||||
# toolchain under windows. You will also have to edit this if you install
|
||||
# the RIDE toolchain in any other location
|
||||
#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/Raisonance/Ride/arm-gcc/bin"
|
||||
|
||||
# This the Cygwin path to the location where I installed the CodeSourcery
|
||||
# toolchain under windows. You will also have to edit this if you install
|
||||
# the CodeSourcery toolchain in any other location
|
||||
export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin"
|
||||
|
||||
# This the Cygwin path to the location where I build the buildroot
|
||||
# toolchain.
|
||||
#export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin"
|
||||
|
||||
# Add the path to the toolchain to the PATH varialble
|
||||
export PATH="${TOOLCHAIN_BIN}:/sbin:/usr/sbin:${PATH_ORIG}"
|
||||
|
||||
echo "PATH : ${PATH}"
|
||||
@@ -0,0 +1,85 @@
|
||||
############################################################################
|
||||
# configs/stm3240g-eval/src/Makefile
|
||||
#
|
||||
# Copyright (C) 2011 Gregory Nutt. All rights reserved.
|
||||
# Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions
|
||||
# are met:
|
||||
#
|
||||
# 1. Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# 2. Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in
|
||||
# the documentation and/or other materials provided with the
|
||||
# distribution.
|
||||
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||
# used to endorse or promote products derived from this software
|
||||
# without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
# POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
############################################################################
|
||||
|
||||
-include $(TOPDIR)/Make.defs
|
||||
|
||||
CFLAGS += -I$(TOPDIR)/sched
|
||||
|
||||
ASRCS =
|
||||
AOBJS = $(ASRCS:.S=$(OBJEXT))
|
||||
|
||||
CSRCS = up_boot.c up_leds.c up_buttons.c up_spi.c
|
||||
|
||||
COBJS = $(CSRCS:.c=$(OBJEXT))
|
||||
|
||||
SRCS = $(ASRCS) $(CSRCS)
|
||||
OBJS = $(AOBJS) $(COBJS)
|
||||
|
||||
ARCH_SRCDIR = $(TOPDIR)/arch/$(CONFIG_ARCH)/src
|
||||
ifeq ($(WINTOOL),y)
|
||||
CFLAGS += -I "${shell cygpath -w $(ARCH_SRCDIR)/chip}" \
|
||||
-I "${shell cygpath -w $(ARCH_SRCDIR)/common}" \
|
||||
-I "${shell cygpath -w $(ARCH_SRCDIR)/armv7-m}"
|
||||
else
|
||||
CFLAGS += -I$(ARCH_SRCDIR)/chip -I$(ARCH_SRCDIR)/common -I$(ARCH_SRCDIR)/armv7-m
|
||||
endif
|
||||
|
||||
all: libboard$(LIBEXT)
|
||||
|
||||
$(AOBJS): %$(OBJEXT): %.S
|
||||
$(call ASSEMBLE, $<, $@)
|
||||
|
||||
$(COBJS) $(LINKOBJS): %$(OBJEXT): %.c
|
||||
$(call COMPILE, $<, $@)
|
||||
|
||||
libboard$(LIBEXT): $(OBJS)
|
||||
@( for obj in $(OBJS) ; do \
|
||||
$(call ARCHIVE, $@, $${obj}); \
|
||||
done ; )
|
||||
|
||||
.depend: Makefile $(SRCS)
|
||||
@$(MKDEP) $(CC) -- $(CFLAGS) -- $(SRCS) >Make.dep
|
||||
@touch $@
|
||||
|
||||
depend: .depend
|
||||
|
||||
clean:
|
||||
@rm -f libboard$(LIBEXT) *~ .*.swp
|
||||
$(call CLEAN)
|
||||
|
||||
distclean: clean
|
||||
@rm -f Make.dep .depend
|
||||
|
||||
-include Make.dep
|
||||
@@ -0,0 +1,113 @@
|
||||
/****************************************************************************************************
|
||||
* configs/stm3240g_eval/src/stm3240g_internal.h
|
||||
* arch/arm/src/board/stm3240g_internal.n
|
||||
*
|
||||
* Copyright (C) 2011 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
****************************************************************************************************/
|
||||
|
||||
#ifndef __CONFIGS_STM3240G_EVAL_SRC_STM3240G_INTERNAL_H
|
||||
#define __CONFIGS_STM3240G_EVAL_SRC_STM3240G_INTERNAL_H
|
||||
|
||||
/****************************************************************************************************
|
||||
* Included Files
|
||||
****************************************************************************************************/
|
||||
|
||||
#include <nuttx/config.h>
|
||||
#include <nuttx/compiler.h>
|
||||
#include <stdint.h>
|
||||
|
||||
/****************************************************************************************************
|
||||
* Definitions
|
||||
****************************************************************************************************/
|
||||
|
||||
/* How many SPI modules does this chip support? */
|
||||
|
||||
#if STM32_NSPI < 1
|
||||
# undef CONFIG_STM32_SPI1
|
||||
# undef CONFIG_STM32_SPI2
|
||||
# undef CONFIG_STM32_SPI3
|
||||
#elif STM32_NSPI < 2
|
||||
# undef CONFIG_STM32_SPI2
|
||||
# undef CONFIG_STM32_SPI3
|
||||
#elif STM32_NSPI < 3
|
||||
# undef CONFIG_STM32_SPI3
|
||||
#endif
|
||||
|
||||
/* STM3240G-EVAL GPIOs ******************************************************************************/
|
||||
/* LEDs */
|
||||
#warning "Missing logic"
|
||||
|
||||
/* BUTTONS -- NOTE that some have EXTI interrupts configured */
|
||||
#warning "Missing logic"
|
||||
|
||||
/****************************************************************************************************
|
||||
* Public Types
|
||||
****************************************************************************************************/
|
||||
|
||||
/* GPIO settings that will be altered when external memory is selected:
|
||||
*
|
||||
* ----- ------- -------- ------------ ------- ------------ -------- ----------- -------- -------------
|
||||
* PB7: FSMC NL PD0-1: FSMC D2-D3 PE0: FSMC NBL0 PF0-5: FSMC A0-A5 PG0-5: FSMC A10-A15
|
||||
* PD3: FSMC CLK PE1: FSMC BLN1 PF6: FSMC NIORD PG6-7: FSMC INT2-3
|
||||
* PD4: FSMC NOE PE2: FSMC A23 PF7: FSMC NREG PG9: FSMC NCE3
|
||||
* PD5: FSMC NWE PE3-6: FSMC A19-A22 PF8: FSMC NIOWR PG9-10: FSMC NE2-3
|
||||
* PD6: FSMC NWAIT PE7-15: FSMC D4-D12 PF9: FSMC CD PG10: FSMC NCE4 (1)
|
||||
* PD7: FSMC NE1 PF10: FSMC INTR PG11: FSMC NCE4 (2)
|
||||
* PD7: FSMC NCE2 PF12-15: FSMC A6-A9 PG12: FSMC NE4
|
||||
* PD8-10: FSMC D13-D15 PG13-14: FSMC A24-A25
|
||||
* PD11-13: FSMC_A16-A18
|
||||
* PD14-15: FSMC D0-D1
|
||||
*/
|
||||
|
||||
/****************************************************************************************************
|
||||
* Public data
|
||||
****************************************************************************************************/
|
||||
|
||||
#ifndef __ASSEMBLY__
|
||||
|
||||
/****************************************************************************************************
|
||||
* Public Functions
|
||||
****************************************************************************************************/
|
||||
|
||||
/****************************************************************************************************
|
||||
* Name: stm32_spiinitialize
|
||||
*
|
||||
* Description:
|
||||
* Called to configure SPI chip select GPIO pins for the STM3240G-EVAL board.
|
||||
*
|
||||
****************************************************************************************************/
|
||||
|
||||
extern void weak_function stm32_spiinitialize(void);
|
||||
|
||||
#endif /* __ASSEMBLY__ */
|
||||
#endif /* __CONFIGS_STM3240G_EVAL_SRC_STM3240G_INTERNAL_H */
|
||||
|
||||
@@ -0,0 +1,90 @@
|
||||
/************************************************************************************
|
||||
* configs/stm3240g-eval/src/up_boot.c
|
||||
* arch/arm/src/board/up_boot.c
|
||||
*
|
||||
* Copyright (C) 2011 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Included Files
|
||||
************************************************************************************/
|
||||
|
||||
#include <nuttx/config.h>
|
||||
|
||||
#include <debug.h>
|
||||
|
||||
#include <arch/board/board.h>
|
||||
|
||||
#include "up_arch.h"
|
||||
#include "stm3240g-internal.h"
|
||||
|
||||
/************************************************************************************
|
||||
* Definitions
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Private Functions
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Public Functions
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Name: stm32_boardinitialize
|
||||
*
|
||||
* Description:
|
||||
* All STM32 architectures must provide the following entry point. This entry point
|
||||
* is called early in the intitialization -- after all memory has been configured
|
||||
* and mapped but before any devices have been initialized.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
void stm32_boardinitialize(void)
|
||||
{
|
||||
/* Configure SPI chip selects if 1) SPI is not disabled, and 2) the weak function
|
||||
* stm32_spiinitialize() has been brought into the link.
|
||||
*/
|
||||
|
||||
#if defined(CONFIG_STM32_SPI1) || defined(CONFIG_STM32_SPI2) || defined(CONFIG_STM32_SPI3)
|
||||
if (stm32_spiinitialize)
|
||||
{
|
||||
stm32_spiinitialize();
|
||||
}
|
||||
#endif
|
||||
|
||||
/* Configure on-board LEDs if LED support has been selected. */
|
||||
|
||||
#ifdef CONFIG_ARCH_LEDS
|
||||
up_ledinit();
|
||||
#endif
|
||||
}
|
||||
@@ -0,0 +1,119 @@
|
||||
/****************************************************************************
|
||||
* configs/stm3240g-eval/src/up_buttons.c
|
||||
*
|
||||
* Copyright (C) 2011 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Included Files
|
||||
****************************************************************************/
|
||||
|
||||
#include <nuttx/config.h>
|
||||
|
||||
#include <stdint.h>
|
||||
|
||||
#include <arch/board/board.h>
|
||||
#include "stm3240g-internal.h"
|
||||
|
||||
#ifdef CONFIG_ARCH_BUTTONS
|
||||
|
||||
/****************************************************************************
|
||||
* Definitions
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Private Data
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Private Functions
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Public Functions
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Name: up_buttoninit
|
||||
*
|
||||
* Description:
|
||||
* up_buttoninit() must be called to initialize button resources. After
|
||||
* that, up_buttons() may be called to collect the current state of all
|
||||
* buttons or up_irqbutton() may be called to register button interrupt
|
||||
* handlers.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
void up_buttoninit(void)
|
||||
{
|
||||
#warning "Missing logic"
|
||||
}
|
||||
|
||||
/****************************************************************************
|
||||
* Name: up_buttons
|
||||
****************************************************************************/
|
||||
|
||||
uint8_t up_buttons(void)
|
||||
{
|
||||
#warning "Missing logic"
|
||||
}
|
||||
|
||||
/************************************************************************************
|
||||
* Button support.
|
||||
*
|
||||
* Description:
|
||||
* up_buttoninit() must be called to initialize button resources. After
|
||||
* that, up_buttons() may be called to collect the current state of all
|
||||
* buttons or up_irqbutton() may be called to register button interrupt
|
||||
* handlers.
|
||||
*
|
||||
* After up_buttoninit() has been called, up_buttons() may be called to
|
||||
* collect the state of all buttons. up_buttons() returns an 8-bit bit set
|
||||
* with each bit associated with a button. See the BUTTON_*_BIT
|
||||
* definitions in board.h for the meaning of each bit.
|
||||
*
|
||||
* up_irqbutton() may be called to register an interrupt handler that will
|
||||
* be called when a button is depressed or released. The ID value is a
|
||||
* button enumeration value that uniquely identifies a button resource. See the
|
||||
* BUTTON_* definitions in board.h for the meaning of enumeration
|
||||
* value. The previous interrupt handler address is returned (so that it may
|
||||
* restored, if so desired).
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
#ifdef CONFIG_ARCH_IRQBUTTONS
|
||||
xcpt_t up_irqbutton(int id, xcpt_t irqhandler)
|
||||
{
|
||||
#warning "Missing logic"
|
||||
}
|
||||
#endif
|
||||
#endif /* CONFIG_ARCH_BUTTONS */
|
||||
@@ -0,0 +1,113 @@
|
||||
/****************************************************************************
|
||||
* configs/stm3240g_eval/src/up_leds.c
|
||||
* arch/arm/src/board/up_leds.c
|
||||
*
|
||||
* Copyright (C) 2011 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Included Files
|
||||
****************************************************************************/
|
||||
|
||||
#include <nuttx/config.h>
|
||||
|
||||
#include <stdint.h>
|
||||
#include <stdbool.h>
|
||||
#include <debug.h>
|
||||
|
||||
#include <arch/board/board.h>
|
||||
|
||||
#include "chip.h"
|
||||
#include "up_arch.h"
|
||||
#include "up_internal.h"
|
||||
#include "stm32_internal.h"
|
||||
#include "stm3240g-internal.h"
|
||||
|
||||
/****************************************************************************
|
||||
* Definitions
|
||||
****************************************************************************/
|
||||
|
||||
/* Enables debug output from this file (needs CONFIG_DEBUG with
|
||||
* CONFIG_DEBUG_VERBOSE too)
|
||||
*/
|
||||
|
||||
#undef LED_DEBUG /* Define to enable debug */
|
||||
|
||||
#ifdef LED_DEBUG
|
||||
# define leddbg lldbg
|
||||
# define ledvdbg llvdbg
|
||||
#else
|
||||
# define leddbg(x...)
|
||||
# define ledvdbg(x...)
|
||||
#endif
|
||||
|
||||
/****************************************************************************
|
||||
* Private Data
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Private Functions
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Public Functions
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Name: up_ledinit
|
||||
****************************************************************************/
|
||||
|
||||
#ifdef CONFIG_ARCH_LEDS
|
||||
void up_ledinit(void)
|
||||
{
|
||||
#warning "Missing logic"
|
||||
}
|
||||
|
||||
/****************************************************************************
|
||||
* Name: up_ledon
|
||||
****************************************************************************/
|
||||
|
||||
void up_ledon(int led)
|
||||
{
|
||||
#warning "Missing logic"
|
||||
}
|
||||
|
||||
/****************************************************************************
|
||||
* Name: up_ledoff
|
||||
****************************************************************************/
|
||||
|
||||
void up_ledoff(int led)
|
||||
{
|
||||
#warning "Missing logic"
|
||||
}
|
||||
|
||||
#endif /* CONFIG_ARCH_LEDS */
|
||||
@@ -0,0 +1,161 @@
|
||||
/************************************************************************************
|
||||
* configs/stm3240g_eval/src/up_spi.c
|
||||
* arch/arm/src/board/up_spi.c
|
||||
*
|
||||
* Copyright (C) 2011 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Included Files
|
||||
************************************************************************************/
|
||||
|
||||
#include <nuttx/config.h>
|
||||
|
||||
#include <stdint.h>
|
||||
#include <stdbool.h>
|
||||
#include <debug.h>
|
||||
|
||||
#include <nuttx/spi.h>
|
||||
#include <arch/board/board.h>
|
||||
|
||||
#include "up_arch.h"
|
||||
#include "chip.h"
|
||||
#include "stm32_internal.h"
|
||||
#include "stm3240g-internal.h"
|
||||
|
||||
#if defined(CONFIG_STM32_SPI1) || defined(CONFIG_STM32_SPI2) || defined(CONFIG_STM32_SPI3)
|
||||
|
||||
/************************************************************************************
|
||||
* Definitions
|
||||
************************************************************************************/
|
||||
|
||||
/* Enables debug output from this file (needs CONFIG_DEBUG too) */
|
||||
|
||||
#undef SPI_DEBUG /* Define to enable debug */
|
||||
#undef SPI_VERBOSE /* Define to enable verbose debug */
|
||||
|
||||
#ifdef SPI_DEBUG
|
||||
# define spidbg lldbg
|
||||
# ifdef SPI_VERBOSE
|
||||
# define spivdbg lldbg
|
||||
# else
|
||||
# define spivdbg(x...)
|
||||
# endif
|
||||
#else
|
||||
# undef SPI_VERBOSE
|
||||
# define spidbg(x...)
|
||||
# define spivdbg(x...)
|
||||
#endif
|
||||
|
||||
/************************************************************************************
|
||||
* Private Functions
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Public Functions
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Name: stm32_spiinitialize
|
||||
*
|
||||
* Description:
|
||||
* Called to configure SPI chip select GPIO pins for the STM3240G-EVAL board.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
void weak_function stm32_spiinitialize(void)
|
||||
{
|
||||
#warning "Missing logic"
|
||||
}
|
||||
|
||||
/****************************************************************************
|
||||
* Name: stm32_spi1/2/3select and stm32_spi1/2/3status
|
||||
*
|
||||
* Description:
|
||||
* The external functions, stm32_spi1/2/3select and stm32_spi1/2/3status must be
|
||||
* provided by board-specific logic. They are implementations of the select
|
||||
* and status methods of the SPI interface defined by struct spi_ops_s (see
|
||||
* include/nuttx/spi.h). All other methods (including up_spiinitialize())
|
||||
* are provided by common STM32 logic. To use this common SPI logic on your
|
||||
* board:
|
||||
*
|
||||
* 1. Provide logic in stm32_boardinitialize() to configure SPI chip select
|
||||
* pins.
|
||||
* 2. Provide stm32_spi1/2/3select() and stm32_spi1/2/3status() functions in your
|
||||
* board-specific logic. These functions will perform chip selection and
|
||||
* status operations using GPIOs in the way your board is configured.
|
||||
* 3. Add a calls to up_spiinitialize() in your low level application
|
||||
* initialization logic
|
||||
* 4. The handle returned by up_spiinitialize() may then be used to bind the
|
||||
* SPI driver to higher level logic (e.g., calling
|
||||
* mmcsd_spislotinitialize(), for example, will bind the SPI driver to
|
||||
* the SPI MMC/SD driver).
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
#ifdef CONFIG_STM32_SPI1
|
||||
void stm32_spi1select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected)
|
||||
{
|
||||
spidbg("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
|
||||
}
|
||||
|
||||
uint8_t stm32_spi1status(FAR struct spi_dev_s *dev, enum spi_dev_e devid)
|
||||
{
|
||||
return SPI_STATUS_PRESENT;
|
||||
}
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_STM32_SPI2
|
||||
void stm32_spi2select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected)
|
||||
{
|
||||
spidbg("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
|
||||
}
|
||||
|
||||
uint8_t stm32_spi2status(FAR struct spi_dev_s *dev, enum spi_dev_e devid)
|
||||
{
|
||||
return SPI_STATUS_PRESENT;
|
||||
}
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_STM32_SPI3
|
||||
void stm32_spi3select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected)
|
||||
{
|
||||
spidbg("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
|
||||
}
|
||||
|
||||
uint8_t stm32_spi3status(FAR struct spi_dev_s *dev, enum spi_dev_e devid)
|
||||
{
|
||||
return SPI_STATUS_PRESENT;
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* CONFIG_STM32_SPI1 || CONFIG_STM32_SPI2 */
|
||||
Reference in New Issue
Block a user