configs/: Change some *err() message to *info() messages if what was a *dbg() message does not indicate and error condition.

arch/arm/src/lpc43xx/lpc43_ssp.c

@@ -69,27 +69,18 @@
  * Pre-processor Definitions
  ****************************************************************************/
 
-/* The following enable debug output from this file (needs CONFIG_DEBUG_FEATURES too).
+/* The following enable debug output from this file */
- *
- * CONFIG_SSP_DEBUG - Define to enable basic SSP debug
- * CONFIG_SSP_VERBOSE - Define to enable verbose SSP debug
- */
 
-#ifdef CONFIG_SSP_DEBUG
+#ifdef CONFIG_DEBUG_SPI
 #  define ssperr  llerr
-#  ifdef CONFIG_SSP_VERBOSE
+#  define sspwarn llwarn
-#    define spiinfo llerr
+#  define sspinfo llinfo
 #else
-#    define spiinfo(x...)
-#  endif
-#else
-#  undef CONFIG_SSP_VERBOSE
 #  define ssperr(x...)
-#  define spiinfo(x...)
+#  define sspwarn(x...)
+#  define sspinfo(x...)
 #endif
 
-
-
 /****************************************************************************
  * Private Types
  ****************************************************************************/
@@ -576,7 +567,7 @@ static void ssp_exchange(FAR struct spi_dev_s *dev, FAR const void *txbuffer,
        * and (3) there are more bytes to be sent.
        */
 
-      spiinfo("TX: rxpending: %d nwords: %d\n", rxpending, nwords);
+      sspinfo("TX: rxpending: %d nwords: %d\n", rxpending, nwords);
       while ((ssp_getreg(priv, LPC43_SSP_SR_OFFSET) & SSP_SR_TNF) &&
              (rxpending < LPC43_SSP_FIFOSZ) && nwords)
         {
@@ -599,7 +590,7 @@ static void ssp_exchange(FAR struct spi_dev_s *dev, FAR const void *txbuffer,
 
       /* Now, read the RX data from the RX FIFO while the RX FIFO is not empty */
 
-      spiinfo("RX: rxpending: %d\n", rxpending);
+      sspinfo("RX: rxpending: %d\n", rxpending);
       while (ssp_getreg(priv, LPC43_SSP_SR_OFFSET) & SSP_SR_RNE)
         {
           data = ssp_getreg(priv, LPC43_SSP_DR_OFFSET);

configs/lpcxpresso-lpc1115/src/lpc11_ssp.c

@@ -58,27 +58,21 @@
  * Pre-processor Definitions
  ************************************************************************************/
 
-/* Enables debug output from this file (needs CONFIG_DEBUG_FEATURES too) */
+/* Enables debug output from this file */
 
-#undef SSP_DEBUG   /* Define to enable debug */
+#ifdef CONFIG_DEBUG_SPI
-#undef SSP_VERBOSE /* Define to enable verbose debug */
-
-#ifdef SSP_DEBUG
 #  define ssperr  llerr
-#  ifdef SSP_VERBOSE
+#  define sspwarn llwarn
-#    define sspinfo llerr
+#  define sspinfo llinfo
 #else
-#    define sspinfo(x...)
-#  endif
-#else
-#  undef SSP_VERBOSE
 #  define ssperr(x...)
+#  define sspwarn(x...)
 #  define sspinfo(x...)
 #endif
 
 /* Dump GPIO registers */
 
-#ifdef SSP_VERBOSE
+#ifdef CONFIG_DEBUG_GPIO
 #  define ssp_dumpgpio(m) lpc11_dumpgpio(SDCCS_GPIO, m)
 #else
 #  define ssp_dumpgpio(m)

configs/lpcxpresso-lpc1768/src/lpc17_ssp.c

@@ -58,27 +58,21 @@
  * Pre-processor Definitions
  ************************************************************************************/
 
-/* Enables debug output from this file (needs CONFIG_DEBUG_FEATURES too) */
+/* Enables debug output from this file */
 
-#undef SSP_DEBUG   /* Define to enable debug */
+#ifdef CONFIG_DEBUG_SPI
-#undef SSP_VERBOSE /* Define to enable verbose debug */
-
-#ifdef SSP_DEBUG
 #  define ssperr  llerr
-#  ifdef SSP_VERBOSE
+#  define sspwarn llwarn
-#    define sspinfo llerr
+#  define sspinfo llinfo
 #else
-#    define sspinfo(x...)
-#  endif
-#else
-#  undef SSP_VERBOSE
 #  define ssperr(x...)
+#  define sspwarn(x...)
 #  define sspinfo(x...)
 #endif
 
 /* Dump GPIO registers */
 
-#ifdef SSP_VERBOSE
+#ifdef CONFIG_DEBUG_GPIO
 #  define ssp_dumpgpio(m) lpc17_dumpgpio(SDCCS_GPIO, m)
 #else
 #  define ssp_dumpgpio(m)

configs/nucleo-144/src/stm32_sdio.c

@@ -140,7 +140,7 @@ int stm32_sdio_initialize(void)
   g_sdio_dev = sdio_initialize(SDIO_SLOTNO);
   if (!g_sdio_dev)
     {
-      ferr("Failed to initialize SDIO slot %d\n", SDIO_SLOTNO);
+      ferr("ERROR: Failed to initialize SDIO slot %d\n", SDIO_SLOTNO);
       return -ENODEV;
     }
 
@@ -151,7 +151,7 @@ int stm32_sdio_initialize(void)
   ret = mmcsd_slotinitialize(SDIO_MINOR, g_sdio_dev);
   if (ret != OK)
     {
-      ferr("Failed to bind SDIO to the MMC/SD driver: %d\n", ret);
+      ferr("ERROR: Failed to bind SDIO to the MMC/SD driver: %d\n", ret);
       return ret;
     }
 

configs/nucleo-144/src/stm32_spi.c

@@ -227,7 +227,7 @@ void weak_function stm32_spidev_initialize(void)
 #ifdef CONFIG_STM32F7_SPI1
 void stm32_spi1select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected)
 {
-  spierr("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
+  spiinfo("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
   stm32_gpiowrite(g_spigpio[i], !selected);
 }
 
@@ -240,7 +240,7 @@ uint8_t stm32_spi1status(FAR struct spi_dev_s *dev, enum spi_dev_e devid)
 #ifdef CONFIG_STM32F7_SPI2
 void stm32_spi2select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected)
 {
-  spierr("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
+  spiinfo("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
   stm32_gpiowrite(g_spigpio[i], !selected);
 }
 
@@ -253,7 +253,7 @@ uint8_t stm32_spi2status(FAR struct spi_dev_s *dev, enum spi_dev_e devid)
 #ifdef CONFIG_STM32F7_SPI3
 void stm32_spi3select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected)
 {
-  spierr("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
+  spiinfo("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
   stm32_gpiowrite(g_spigpio[i], !selected);
 }
 
@@ -270,7 +270,7 @@ uint8_t stm32_spi3status(FAR struct spi_dev_s *dev, enum spi_dev_e devid)
 
 void stm32_spi4select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected)
 {
-  spierr("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
+  spiinfo("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
   stm32_gpiowrite(g_spigpio[i], !selected);
 }
 
@@ -287,7 +287,7 @@ uint8_t stm32_spi4status(FAR struct spi_dev_s *dev, enum spi_dev_e devid)
 
 void stm32_spi5select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected)
 {
-  spierr("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
+  spiinfo("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
   stm32_gpiowrite(g_spigpio[i], !selected);
 }
 
@@ -303,7 +303,7 @@ uint8_t stm32_spi5status(FAR struct spi_dev_s *dev, enum spi_dev_e devid)
 #  endif
 void stm32_spi5select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected)
 {
-  spierr("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
+  spiinfo("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
   stm32_gpiowrite(g_spigpio[i], !selected);
 }
 

configs/nucleo-f303re/src/stm32_adc.c

@@ -231,7 +231,7 @@ int board_adc_setup(void)
       ret = adc_register("/dev/adc0", adc);
       if (ret < 0)
         {
-          aerr("adc_register failed: %d\n", ret);
+          aerr("ERROR: adc_register failed: %d\n", ret);
           return ret;
         }
 

configs/nucleo-f303re/src/stm32_pwm.c

@@ -112,7 +112,7 @@ int board_pwm_setup(void)
       pwm = stm32_pwminitialize(NUCLEO_F303RE_PWMTIMER);
       if (pwm == NULL)
         {
-          pwmerr("Failed to get the STM32 PWM lower half\n");
+          pwmerr("ERROR: Failed to get the STM32 PWM lower half\n");
           return -ENODEV;
         }
 
@@ -121,7 +121,7 @@ int board_pwm_setup(void)
       ret = pwm_register("/dev/pwm0", pwm);
       if (ret < 0)
         {
-          pwmerr("pwm_register failed: %d\n", ret);
+          pwmerr("ERROR: pwm_register failed: %d\n", ret);
           return ret;
         }
 

configs/nucleo-f303re/src/stm32_spi.c

@@ -122,7 +122,7 @@ void weak_function stm32_spidev_initialize(void)
 void stm32_spi1select(FAR struct spi_dev_s *dev, enum spi_dev_e devid,
                       bool selected)
 {
-  spierr("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
+  spiinfo("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
 
 #if defined(CONFIG_LCD_SSD1351)
   if (devid == SPIDEV_DISPLAY)
@@ -142,7 +142,7 @@ uint8_t stm32_spi1status(FAR struct spi_dev_s *dev, enum spi_dev_e devid)
 void stm32_spi2select(FAR struct spi_dev_s *dev, enum spi_dev_e devid,
                       bool selected)
 {
-  spierr("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
+  spiinfo("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
 }
 
 uint8_t stm32_spi2status(FAR struct spi_dev_s *dev, enum spi_dev_e devid)
@@ -155,7 +155,7 @@ uint8_t stm32_spi2status(FAR struct spi_dev_s *dev, enum spi_dev_e devid)
 void stm32_spi3select(FAR struct spi_dev_s *dev, enum spi_dev_e devid,
                       bool selected)
 {
-  spierr("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
+  spiinfo("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
 }
 
 uint8_t stm32_spi3status(FAR struct spi_dev_s *dev, enum spi_dev_e devid)

configs/nucleo-f303re/src/stm32_ssd1351.c

@@ -114,7 +114,7 @@ FAR struct lcd_dev_s *board_graphics_setup(unsigned int devno)
   spi = stm32_spibus_initialize(1);
   if (spi == NULL)
     {
-      lcderr("Failed to initialize SPI port 1\n");
+      lcderr("ERROR: Failed to initialize SPI port 1\n");
     }
   else
     {
@@ -123,7 +123,7 @@ FAR struct lcd_dev_s *board_graphics_setup(unsigned int devno)
       dev = ssd1351_initialize(spi, devno);
       if (dev == NULL)
         {
-          lcderr("Failed to bind SPI port 1 to OLED %d: %d\n", devno);
+          lcderr("ERROR: Failed to bind SPI port 1 to OLED %d: %d\n", devno);
         }
      else
         {

configs/nucleo-f4x1re/src/stm32_adc.c

@@ -146,7 +146,7 @@ int board_adc_initialize(void)
       ret = adc_register("/dev/adc0", adc);
       if (ret < 0)
         {
-          aerr("adc_register failed: %d\n", ret);
+          aerr("ERROR: adc_register failed: %d\n", ret);
           return ret;
         }
 #endif

configs/nucleo-f4x1re/src/stm32_spi.c

@@ -61,20 +61,13 @@
 
 /* Enables debug output from this file */
 
-#ifndef CONFIG_DEBUG_FEATURES
-#  undef CONFIG_DEBUG_SPI
-#  undef CONFIG_DEBUG_INFO
-#endif
-
 #ifdef CONFIG_DEBUG_SPI
 #  define spierr  llerr
-#  ifdef CONFIG_DEBUG_INFO
+#  define spiwarn llwarn
-#    define spiinfo llerr
+#  define spiinfo llinfo
-#  else
-#    define spiinfo(x...)
-#  endif
 #else
 #  define spierr(x...)
+#  define spiwarn(x...)
 #  define spiinfo(x...)
 #endif
 
@@ -111,7 +104,7 @@ void weak_function stm32_spidev_initialize(void)
   g_spi1 = stm32_spibus_initialize(1);
   if (!g_spi1)
     {
-      spierr("[boot] FAILED to initialize SPI port 1\n");
+      spierr("ERROR: FAILED to initialize SPI port 1\n");
     }
 
 #ifdef CONFIG_WL_CC3000
@@ -166,7 +159,7 @@ void weak_function stm32_spidev_initialize(void)
 #ifdef CONFIG_STM32_SPI1
 void stm32_spi1select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected)
 {
-  spierr("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
+  spiinfo("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
 
 #ifdef CONFIG_WL_CC3000
   if (devid == SPIDEV_WIRELESS)
@@ -192,7 +185,7 @@ uint8_t stm32_spi1status(FAR struct spi_dev_s *dev, enum spi_dev_e devid)
 #ifdef CONFIG_STM32_SPI2
 void stm32_spi2select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected)
 {
-  spierr("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
+  spiinfo("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
 
 #ifdef CONFIG_WL_CC3000
   if (devid == SPIDEV_WIRELESS)
@@ -211,7 +204,7 @@ uint8_t stm32_spi2status(FAR struct spi_dev_s *dev, enum spi_dev_e devid)
 #ifdef CONFIG_STM32_SPI3
 void stm32_spi3select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected)
 
-  spierr("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
+  spiinfo("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
 }
 
 uint8_t stm32_spi3status(FAR struct spi_dev_s *dev, enum spi_dev_e devid)

configs/nucleo-f4x1re/src/stm32_wireless.c

@@ -280,7 +280,7 @@ int wireless_archinitialize(size_t max_rx_size)
 
   /* Init SPI bus */
 
-  ierr("minor %d\n", minor);
+  iinfo("minor %d\n", minor);
   DEBUGASSERT(CONFIG_CC3000_DEVMINOR == 0);
 
 #ifdef CONFIG_CC3000_PROBES
@@ -295,7 +295,7 @@ int wireless_archinitialize(size_t max_rx_size)
   spi = stm32_spibus_initialize(CONFIG_CC3000_SPIDEV);
   if (!spi)
     {
-      ierr("Failed to initialize SPI bus %d\n", CONFIG_CC3000_SPIDEV);
+      ierr("ERROR: Failed to initialize SPI bus %d\n", CONFIG_CC3000_SPIDEV);
       return -ENODEV;
     }
 
@@ -305,7 +305,7 @@ int wireless_archinitialize(size_t max_rx_size)
   int ret = cc3000_register(spi, &g_cc3000_info.dev, CONFIG_CC3000_DEVMINOR);
   if (ret < 0)
     {
-      ierr("Failed to initialize SPI bus %d\n", CONFIG_CC3000_SPIDEV);
+      ierr("ERROR: Failed to initialize SPI bus %d\n", CONFIG_CC3000_SPIDEV);
       return -ENODEV;
     }
 

configs/nucleo-l476rg/src/stm32_adc.c

@@ -146,7 +146,7 @@ int board_adc_initialize(void)
       ret = adc_register("/dev/adc0", adc);
       if (ret < 0)
         {
-          aerr("adc_register failed: %d\n", ret);
+          aerr("ERROR: adc_register failed: %d\n", ret);
           return ret;
         }
 #endif

configs/nucleo-l476rg/src/stm32_spi.c

@@ -61,20 +61,13 @@
 
 /* Enables debug output from this file */
 
-#ifndef CONFIG_DEBUG_FEATURES
-#  undef CONFIG_DEBUG_SPI
-#  undef CONFIG_DEBUG_INFO
-#endif
-
 #ifdef CONFIG_DEBUG_SPI
 #  define spierr  llerr
-#  ifdef CONFIG_DEBUG_INFO
+#  define spiwarn llwarn
-#    define spiinfo llerr
+#  define spiinfo llinfo
-#  else
-#    define spiinfo(x...)
-#  endif
 #else
 #  define spierr(x...)
+#  define spiwarn(x...)
 #  define spiinfo(x...)
 #endif
 
@@ -111,7 +104,7 @@ void weak_function stm32_spiinitialize(void)
   g_spi1 = up_spiinitialize(1);
   if (!g_spi1)
     {
-      spierr("[boot] FAILED to initialize SPI port 1\n");
+      spierr("ERROR: FAILED to initialize SPI port 1\n");
     }
 
 #ifdef CONFIG_WL_CC3000
@@ -166,7 +159,7 @@ void weak_function stm32_spiinitialize(void)
 #ifdef CONFIG_STM32_SPI1
 void stm32_spi1select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected)
 {
-  spierr("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
+  spiinfo("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
 
 #ifdef CONFIG_WL_CC3000
   if (devid == SPIDEV_WIRELESS)
@@ -192,7 +185,7 @@ uint8_t stm32_spi1status(FAR struct spi_dev_s *dev, enum spi_dev_e devid)
 #ifdef CONFIG_STM32_SPI2
 void stm32_spi2select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected)
 {
-  spierr("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
+  spiinfo("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
 
 #ifdef CONFIG_WL_CC3000
   if (devid == SPIDEV_WIRELESS)
@@ -211,7 +204,7 @@ uint8_t stm32_spi2status(FAR struct spi_dev_s *dev, enum spi_dev_e devid)
 #ifdef CONFIG_STM32_SPI3
 void stm32_spi3select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected)
 
-  spierr("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
+  spiinfo("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
 }
 
 uint8_t stm32_spi3status(FAR struct spi_dev_s *dev, enum spi_dev_e devid)

configs/nucleo-l476rg/src/stm32_wireless.c

@@ -280,7 +280,7 @@ int wireless_archinitialize(size_t max_rx_size)
 
   /* Init SPI bus */
 
-  ierr("minor %d\n", minor);
+  iinfo("minor %d\n", minor);
   DEBUGASSERT(CONFIG_CC3000_DEVMINOR == 0);
 
 #ifdef CONFIG_CC3000_PROBES
@@ -295,7 +295,7 @@ int wireless_archinitialize(size_t max_rx_size)
   spi = up_spiinitialize(CONFIG_CC3000_SPIDEV);
   if (!spi)
     {
-      ierr("Failed to initialize SPI bus %d\n", CONFIG_CC3000_SPIDEV);
+      ierr("ERROR: Failed to initialize SPI bus %d\n", CONFIG_CC3000_SPIDEV);
       return -ENODEV;
     }
 
@@ -305,7 +305,7 @@ int wireless_archinitialize(size_t max_rx_size)
   int ret = cc3000_register(spi, &g_cc3000_info.dev, CONFIG_CC3000_DEVMINOR);
   if (ret < 0)
     {
-      ierr("Failed to initialize SPI bus %d\n", CONFIG_CC3000_SPIDEV);
+      ierr("ERROR: Failed to initialize SPI bus %d\n", CONFIG_CC3000_SPIDEV);
       return -ENODEV;
     }
 

configs/olimex-lpc-h3131/src/lpc31_spi.c

@@ -117,7 +117,7 @@ void weak_function lpc31_spidev_intialize(void)
 
 void lpc31_spiselect(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected)
 {
-  spierr("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
+  spiinfo("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
 #warning "Missing logic"
 }
 

configs/olimex-lpc1766stk/src/lpc17_hidmouse.c

@@ -114,7 +114,7 @@ int board_tsc_setup(int minor)
   static bool initialized = false;
   int ret;
 
-  ierr("minor %d\n", minor);
+  iinfo("minor %d\n", minor);
   DEBUGASSERT(minor == 0);
 
   /* Have we already initialized?  Since we never uninitialize we must prevent
@@ -140,7 +140,7 @@ int board_tsc_setup(int minor)
       ret = usbhost_mouse_init();
       if (ret < 0)
         {
-          ierr("Failed to register USB HID mouse device class\n");
+          ierr("ERROR: Failed to register USB HID mouse device class\n");
           return -ENODEV;
         }
 

configs/olimex-lpc1766stk/src/lpc17_lcd.c

@@ -214,7 +214,7 @@ FAR struct lcd_dev_s *board_graphics_setup(unsigned int devno)
   spi = lpc17_sspbus_initialize(0);
   if (!spi)
     {
-      gllerr("Failed to initialize SSP port 0\n");
+      gllerr("ERROR: Failed to initialize SSP port 0\n");
     }
   else
     {
@@ -223,7 +223,7 @@ FAR struct lcd_dev_s *board_graphics_setup(unsigned int devno)
       dev = nokia_lcdinitialize(spi, devno);
       if (!dev)
         {
-          gllerr("Failed to bind SSP port 0 to LCD %d: %d\n", devno);
+          gllerr("ERROR: Failed to bind SSP port 0 to LCD %d: %d\n", devno);
         }
      else
         {

configs/olimex-lpc1766stk/src/lpc17_ssp.c

@@ -74,28 +74,22 @@
 #endif
 
 /* Debug ********************************************************************/
-/* The following enable debug output from this file (needs CONFIG_DEBUG_FEATURES too).
- *
- * CONFIG_SSP_DEBUG - Define to enable basic SSP debug
- * CONFIG_SSP_VERBOSE - Define to enable verbose SSP debug
- */
 
-#ifdef CONFIG_SSP_DEBUG
+/* The following enable debug output from this file */
+
+#ifdef CONFIG_DEBUG_SPI
 #  define ssperr  llerr
-#  ifdef CONFIG_SSP_VERBOSE
+#  define sspwarn llwarn
-#    define sspinfo llerr
+#  define sspinfo llinfo
 #else
-#    define sspinfo(x...)
-#  endif
-#else
-#  undef CONFIG_SSP_VERBOSE
 #  define ssperr(x...)
+#  define sspwarn(x...)
 #  define sspinfo(x...)
 #endif
 
 /* Dump GPIO registers */
 
-#ifdef CONFIG_SSP_VERBOSE
+#ifdef CONFIG_DEBUG_GPIO
 #  define ssp_dumpssp0gpio(m) lpc17_dumpgpio(LPC1766STK_LCD_CS, m)
 #  define ssp_dumpssp1gpio(m) lpc17_dumpgpio(LPC1766STK_MMC_CS, m)
 #else
@@ -284,7 +278,7 @@ void weak_function lpc1766stk_sspdev_initialize(void)
 #ifdef CONFIG_LPC17_SSP0
 void  lpc17_ssp0select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected)
 {
-  ssperr("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
+  sspinfo("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
   if (devid == SPIDEV_DISPLAY)
     {
       /* Assert/de-assert the CS pin to the card */
@@ -297,7 +291,7 @@ void  lpc17_ssp0select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool sel
 
 uint8_t lpc17_ssp0status(FAR struct spi_dev_s *dev, enum spi_dev_e devid)
 {
-  ssperr("Returning nothing\n");
+  sspinfo("Returning nothing\n");
   return 0;
 }
 #endif
@@ -305,7 +299,7 @@ uint8_t lpc17_ssp0status(FAR struct spi_dev_s *dev, enum spi_dev_e devid)
 #ifdef CONFIG_LPC17_SSP1
 void  lpc17_ssp1select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected)
 {
-  ssperr("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
+  sspinfo("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
   if (devid == SPIDEV_MMCSD)
     {
       /* Assert/de-assert the CS pin to the card */
@@ -318,7 +312,7 @@ void  lpc17_ssp1select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool sel
 
 uint8_t lpc17_ssp1status(FAR struct spi_dev_s *dev, enum spi_dev_e devid)
 {
-  ssperr("Returning SPI_STATUS_PRESENT\n");
+  sspinfo("Returning SPI_STATUS_PRESENT\n");
   return SPI_STATUS_PRESENT;
 }
 #endif

configs/olimex-stm32-h405/src/stm32_adc.c

@@ -168,7 +168,7 @@ int stm32_adc_initialize(void)
       ret = adc_register("/dev/adc0", adc);
       if (ret < 0)
         {
-          aerr("adc_register failed: %d\n", ret);
+          aerr("ERROR: adc_register failed: %d\n", ret);
           return ret;
         }
 

configs/olimex-stm32-h405/src/stm32_usb.c

@@ -110,7 +110,7 @@ void stm32_usbinitialize(void)
 #ifdef CONFIG_USBDEV
 void stm32_usbsuspend(FAR struct usbdev_s *dev, bool resume)
 {
-  ullerr("resume: %d\n", resume);
+  ullinfo("resume: %d\n", resume);
 }
 #endif
 

configs/olimex-stm32-h407/src/stm32_adc.c

@@ -168,7 +168,7 @@ int stm32_adc_initialize(void)
       ret = adc_register("/dev/adc0", adc);
       if (ret < 0)
         {
-          aerr("adc_register failed: %d\n", ret);
+          aerr("ERROR: adc_register failed: %d\n", ret);
           return ret;
         }
 

configs/olimex-stm32-h407/src/stm32_sdio.c

@@ -139,7 +139,7 @@ int stm32_sdio_initialize(void)
   g_sdio_dev = sdio_initialize(SDIO_SLOTNO);
   if (!g_sdio_dev)
     {
-      ferr("Failed to initialize SDIO slot %d\n", SDIO_SLOTNO);
+      ferr("ERROR: Failed to initialize SDIO slot %d\n", SDIO_SLOTNO);
       return -ENODEV;
     }
 
@@ -150,7 +150,7 @@ int stm32_sdio_initialize(void)
   ret = mmcsd_slotinitialize(SDIO_MINOR, g_sdio_dev);
   if (ret != OK)
     {
-      ferr("Failed to bind SDIO to the MMC/SD driver: %d\n", ret);
+      ferr("ERROR: Failed to bind SDIO to the MMC/SD driver: %d\n", ret);
       return ret;
     }
 

configs/olimex-stm32-h407/src/stm32_usb.c

@@ -307,7 +307,7 @@ xcpt_t stm32_setup_overcurrent(xcpt_t handler)
 #ifdef CONFIG_USBDEV
 void stm32_usbsuspend(FAR struct usbdev_s *dev, bool resume)
 {
-  ullerr("resume: %d\n", resume);
+  ullinfo("resume: %d\n", resume);
 }
 #endif
 

configs/olimex-stm32-p107/src/stm32_encx24j600.c

@@ -180,7 +180,7 @@ void up_netinitialize(void)
   spi = stm32_spibus_initialize(ENCX24J600_SPI_PORTNO);
   if (!spi)
     {
-      nllerr("Failed to initialize SPI port %d\n", ENCX24J600_SPI_PORTNO);
+      nllerr("ERROR: Failed to initialize SPI port %d\n", ENCX24J600_SPI_PORTNO);
       return;
     }
 
@@ -190,7 +190,7 @@ void up_netinitialize(void)
 
   if (ret < 0)
     {
-      nllerr("Failed to bind SPI port %d ENCX24J600 device %d: %d\n",
+      nllerr("ERROR: Failed to bind SPI port %d ENCX24J600 device %d: %d\n",
              ENCX24J600_SPI_PORTNO, ENCX24J600_DEVNO, ret);
       return;
     }

configs/olimex-stm32-p107/src/stm32_spi.c

@@ -126,7 +126,7 @@ void weak_function stm32_spidev_initialize(void)
 #ifdef CONFIG_STM32_SPI3
 void stm32_spi3select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected)
 {
-  spierr("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
+  spiinfo("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
 
   if (devid == SPIDEV_ETHERNET)
     {

configs/olimex-stm32-p207/src/stm32_adc.c

@@ -160,7 +160,7 @@ int stm32_adc_initialize(void)
       ret = adc_register("/dev/adc0", adc);
       if (ret < 0)
         {
-          aerr("adc_register failed: %d\n", ret);
+          aerr("ERROR: adc_register failed: %d\n", ret);
           return ret;
         }
 

configs/olimex-stm32-p207/src/stm32_usb.c

@@ -311,7 +311,7 @@ void stm32_usbhost_vbusdrive(int iface, bool enable)
 #ifdef CONFIG_USBDEV
 void stm32_usbsuspend(FAR struct usbdev_s *dev, bool resume)
 {
-  ullerr("resume: %d\n", resume);
+  ullinfo("resume: %d\n", resume);
 }
 #endif
 

configs/olimex-strp711/src/str71_enc28j60.c

@@ -216,7 +216,7 @@ void up_netinitialize(void)
   spi = str71_spibus_initialize(ENC28J60_SPI_PORTNO);
   if (!spi)
     {
-      nllerr("Failed to initialize SPI port %d\n", ENC28J60_SPI_PORTNO);
+      nllerr("ERROR: Failed to initialize SPI port %d\n", ENC28J60_SPI_PORTNO);
       return;
     }
 
@@ -225,7 +225,7 @@ void up_netinitialize(void)
   ret = str71x_xticonfig(ENC28J60_IRQ, false);
   if (ret < 0)
     {
-      nllerr("Failed configure interrupt for IRQ %d: %d\n", ENC28J60_IRQ, ret);
+      nllerr("ERROR: Failed configure interrupt for IRQ %d: %d\n", ENC28J60_IRQ, ret);
       return;
     }
 
@@ -240,7 +240,7 @@ void up_netinitialize(void)
   ret = enc_initialize(spi, &g_enclower, ENC28J60_DEVNO);
   if (ret < 0)
     {
-      nllerr("Failed to bind SPI port %d ENC28J60 device %d: %d\n",
+      nllerr("ERROR: Failed to bind SPI port %d ENC28J60 device %d: %d\n",
              ENC28J60_SPI_PORTNO, ENC28J60_DEVNO, ret);
       return;
     }

configs/olimexino-stm32/src/stm32_spi.c

@@ -125,7 +125,7 @@ void weak_function stm32_spidev_initialize(void)
 #ifdef CONFIG_STM32_SPI1
 void stm32_spi1select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected)
 {
-  spierr("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
+  spiinfo("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
   if (devid == SPIDEV_USER)
     {
       stm32_gpiowrite(USER_CSn, !selected);
@@ -141,7 +141,7 @@ uint8_t stm32_spi1status(FAR struct spi_dev_s *dev, enum spi_dev_e devid)
 #ifdef CONFIG_STM32_SPI2
 void stm32_spi2select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected)
 {
-  spierr("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
+  spiinfo("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
 #if defined(CONFIG_MMCSD)
   if (devid == SPIDEV_MMCSD)
     {
@@ -161,7 +161,7 @@ uint8_t stm32_spi2status(FAR struct spi_dev_s *dev, enum spi_dev_e devid)
 #ifdef CONFIG_STM32_SPI3
 void stm32_spi3select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected)
 {
-  spierr("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
+  spiinfo("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
 }
 
 uint8_t stm32_spi3status(FAR struct spi_dev_s *dev, enum spi_dev_e devid)

configs/olimexino-stm32/src/stm32_usbdev.c

@@ -90,7 +90,7 @@ void stm32_usb_set_pwr_callback(xcpt_t pwr_changed_handler)
 
 void stm32_usbinitialize(void)
 {
-  ullerr("called\n");
+  ullinfo("called\n");
 
   /* USB Soft Connect Pullup */
 
@@ -129,5 +129,5 @@ int stm32_usbpullup(FAR struct usbdev_s *dev, bool enable)
 
 void stm32_usbsuspend(FAR struct usbdev_s *dev, bool resume)
 {
-  ullerr("resume: %d\n", resume);
+  ullinfo("resume: %d\n", resume);
 }

configs/open1788/src/lpc17_ssp.c

@@ -65,13 +65,11 @@
 
 #ifdef CONFIG_DEBUG_SPI
 #  define ssperr  llerr
-#  ifdef CONFIG_DEBUG_INFO
+#  define sspwarn llwarn
-#    define sspinfo llerr
+#  define sspinfo llinfo
-#  else
-#    define sspinfo(x...)
-#  endif
 #else
 #  define ssperr(x...)
+#  define sspwarn(x...)
 #  define sspinfo(x...)
 #endif
 
@@ -83,18 +81,6 @@
 #  define ssp_dumpgpio(p,m)
 #endif
 
-/****************************************************************************
- * Private Types
- ****************************************************************************/
-
-/****************************************************************************
- * Private Data
- ****************************************************************************/
-
-/****************************************************************************
- * Private Functions
- ****************************************************************************/
-
 /****************************************************************************
  * Public Functions
  ****************************************************************************/
@@ -158,12 +144,12 @@ void weak_function open1788_sspdev_initialize(void)
 #ifdef CONFIG_LPC17_SSP0
 void  lpc17_ssp0select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected)
 {
-  ssperr("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
+  sspinfo("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
 }
 
 uint8_t lpc17_ssp0status(FAR struct spi_dev_s *dev, enum spi_dev_e devid)
 {
-  ssperr("Returning nothing\n");
+  sspinfo("Returning nothing\n");
   return 0;
 }
 #endif
@@ -171,7 +157,7 @@ uint8_t lpc17_ssp0status(FAR struct spi_dev_s *dev, enum spi_dev_e devid)
 #ifdef CONFIG_LPC17_SSP1
 void  lpc17_ssp1select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected)
 {
-  ssperr("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
+  sspinfo("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
   if (devid == SPIDEV_TOUCHSCREEN)
     {
       /* Assert/de-assert the CS pin to the touchscreen */
@@ -184,7 +170,7 @@ void  lpc17_ssp1select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool sel
 
 uint8_t lpc17_ssp1status(FAR struct spi_dev_s *dev, enum spi_dev_e devid)
 {
-  ssperr("Returning nothing\n");
+  sspinfo("Returning nothing\n");
   return 0;
 }
 #endif
@@ -192,12 +178,12 @@ uint8_t lpc17_ssp1status(FAR struct spi_dev_s *dev, enum spi_dev_e devid)
 #ifdef CONFIG_LPC17_SSP2
 void  lpc17_ssp2select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected)
 {
-  ssperr("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
+  sspinfo("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
 }
 
 uint8_t lpc17_ssp2status(FAR struct spi_dev_s *dev, enum spi_dev_e devid)
 {
-  ssperr("Returning nothing\n");
+  sspinfo("Returning nothing\n");
   return 0;
 }
 #endif

configs/open1788/src/lpc17_touchscreen.c

@@ -277,7 +277,7 @@ int board_tsc_setup(int minor)
   FAR struct spi_dev_s *dev;
   int ret;
 
-  ierr("initialized:%d minor:%d\n", initialized, minor);
+  iinfo("initialized:%d minor:%d\n", initialized, minor);
   DEBUGASSERT(minor == 0);
 
   /* Since there is no uninitialized logic, this initialization can be
@@ -301,7 +301,7 @@ int board_tsc_setup(int minor)
       dev = lpc17_sspbus_initialize(CONFIG_ADS7843E_SPIDEV);
       if (!dev)
         {
-          ierr("Failed to initialize SPI bus %d\n", CONFIG_ADS7843E_SPIDEV);
+          ierr("ERROR: Failed to initialize SPI bus %d\n", CONFIG_ADS7843E_SPIDEV);
           return -ENODEV;
         }
 
@@ -310,7 +310,7 @@ int board_tsc_setup(int minor)
       ret = ads7843e_register(dev, &g_tscinfo, CONFIG_ADS7843E_DEVMINOR);
       if (ret < 0)
         {
-          ierr("Failed to register touchscreen device minor=%d\n",
+          ierr("ERROR: Failed to register touchscreen device minor=%d\n",
                CONFIG_ADS7843E_DEVMINOR);
        /* up_spiuninitialize(dev); */
           return -ENODEV;

configs/pic32mx-starterkit/src/pic32mx_spi.c

@@ -123,13 +123,13 @@ enum spi_dev_e;
 #ifdef CONFIG_PIC32MX_SPI1
 void  pic32mx_spi1select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected)
 {
-  spierr("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
+  spiinfo("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
 #warning "Missing logic"
 }
 
 uint8_t pic32mx_spi1status(FAR struct spi_dev_s *dev, enum spi_dev_e devid)
 {
-  spierr("Returning nothing\n");
+  spiinfo("Returning nothing\n");
 #warning "Missing logic"
   return 0;
 }
@@ -145,13 +145,13 @@ int pic32mx_spi1cmddata(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool cm
 #ifdef CONFIG_PIC32MX_SPI1
 void  pic32mx_spi1select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected)
 {
-  spierr("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
+  spiinfo("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
 #warning "Missing logic"
 }
 
 uint8_t pic32mx_spi1status(FAR struct spi_dev_s *dev, enum spi_dev_e devid)
 {
-  spierr("Returning nothing\n");
+  spiinfo("Returning nothing\n");
 #warning "Missing logic"
   return 0;
 }
@@ -167,13 +167,13 @@ int pic32mx_spi1cmddata(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool cm
 #ifdef CONFIG_PIC32MX_SPI3
 void  pic32mx_spi3select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected)
 {
-  spierr("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
+  spiinfo("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
 #warning "Missing logic"
 }
 
 uint8_t pic32mx_spi3status(FAR struct spi_dev_s *dev, enum spi_dev_e devid)
 {
-  spierr("Returning nothing\n");
+  spiinfo("Returning nothing\n");
 #warning "Missing logic"
   return 0;
 }
@@ -189,13 +189,13 @@ int pic32mx_spi3cmddata(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool cm
 #ifdef CONFIG_PIC32MX_SPI4
 void  pic32mx_spi4select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected)
 {
-  spierr("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
+  spiinfo("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
 #warning "Missing logic"
 }
 
 uint8_t pic32mx_spi4status(FAR struct spi_dev_s *dev, enum spi_dev_e devid)
 {
-  spierr("Returning nothing\n");
+  spiinfo("Returning nothing\n");
 #warning "Missing logic"
   return 0;
 }

configs/pic32mx7mmb/src/pic32_spi.c

@@ -82,16 +82,14 @@
 
 #ifdef CONFIG_DEBUG_SPI
 #  define spierr  llerr
+#  define spiwarn llwarn
 #  define spiinfo llinfo
 #else
 #  define spierr(x...)
+#  define spiwarn(x...)
 #  define spiinfo(x...)
 #endif
 
-/************************************************************************************
- * Private Functions
- ************************************************************************************/
-
 /************************************************************************************
  * Public Functions
  ************************************************************************************/
@@ -150,7 +148,7 @@ enum spi_dev_e;
 #ifdef CONFIG_PIC32MX_SPI1
 void  pic32mx_spi1select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected)
 {
-  spierr("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
+  spiinfo("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
 
   if (devid == SPIDEV_MMCSD)
     {
@@ -179,7 +177,7 @@ uint8_t pic32mx_spi1status(FAR struct spi_dev_s *dev, enum spi_dev_e devid)
         }
     }
 
-  spierr("Returning %02x\n", ret);
+  spiinfo("Returning %02x\n", ret);
   return ret;
 }
 #ifdef CONFIG_SPI_CMDDATA
@@ -194,13 +192,13 @@ int pic32mx_spi1cmddata(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool cm
 #ifdef CONFIG_PIC32MX_SPI2
 void  pic31mx_spi2select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected)
 {
-  spierr("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
+  spiinfo("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
 #warning "Missing logic"
 }
 
 uint8_t pic31mx_spi2status(FAR struct spi_dev_s *dev, enum spi_dev_e devid)
 {
-  spierr("Returning nothing\n");
+  spiinfo("Returning nothing\n");
 #warning "Missing logic"
   return 0;
 }
@@ -217,13 +215,13 @@ int pic31mx_spi2cmddata(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool cm
 #ifdef CONFIG_PIC32MX_SPI3
 void  pic32mx_spi3select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected)
 {
-  spierr("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
+  spiinfo("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
 #warning "Missing logic"
 }
 
 uint8_t pic32mx_spi3status(FAR struct spi_dev_s *dev, enum spi_dev_e devid)
 {
-  spierr("Returning nothing\n");
+  spiinfo("Returning nothing\n");
 #warning "Missing logic"
   return 0;
 }
@@ -240,13 +238,13 @@ int pic32mx_spi3cmddata(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool cm
 #ifdef CONFIG_PIC32MX_SPI4
 void  pic32mx_spi4select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected)
 {
-  spierr("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
+  spiinfo("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
 #warning "Missing logic"
 }
 
 uint8_t pic32mx_spi4status(FAR struct spi_dev_s *dev, enum spi_dev_e devid)
 {
-  spierr("Returning nothing\n");
+  spiinfo("Returning nothing\n");
 #warning "Missing logic"
   return 0;
 }

configs/pic32mx7mmb/src/pic32_touchscreen.c

@@ -1282,7 +1282,7 @@ static int tc_poll(FAR struct file *filep, FAR struct pollfd *fds,
 
       if ((fds->events & POLLIN) == 0)
         {
-          ierr("Missing POLLIN: revents: %08x\n", fds->revents);
+          ierr("ERROR: Missing POLLIN: revents: %08x\n", fds->revents);
           ret = -EDEADLK;
           goto errout;
         }
@@ -1307,7 +1307,7 @@ static int tc_poll(FAR struct file *filep, FAR struct pollfd *fds,
 
       if (i >= CONFIG_TOUCHSCREEN_NPOLLWAITERS)
         {
-          ierr("No availabled slot found: %d\n", i);
+          ierr("ERROR: No available slot found: %d\n", i);
           fds->priv    = NULL;
           ret          = -EBUSY;
           goto errout;
@@ -1389,7 +1389,7 @@ int board_tsc_setup(int minor)
   priv = (FAR struct tc_dev_s *)kmm_malloc(sizeof(struct tc_dev_s));
   if (!priv)
     {
-      ierr("kmm_malloc(%d) failed\n", sizeof(struct tc_dev_s));
+      ierr("ERROR: kmm_malloc(%d) failed\n", sizeof(struct tc_dev_s));
       return -ENOMEM;
     }
 #endif
@@ -1408,7 +1408,7 @@ int board_tsc_setup(int minor)
   ret = register_driver(devname, &tc_fops, 0666, priv);
   if (ret < 0)
     {
-      ierr("register_driver() failed: %d\n", ret);
+      ierr("ERROR: register_driver() failed: %d\n", ret);
       goto errout_with_priv;
     }
 
@@ -1420,7 +1420,7 @@ int board_tsc_setup(int minor)
   ret = work_queue(HPWORK, &priv->work, tc_worker, priv, 0);
   if (ret != 0)
     {
-      ierr("Failed to queue work: %d\n", ret);
+      ierr("ERROR: Failed to queue work: %d\n", ret);
       goto errout_with_priv;
     }
 

configs/pic32mz-starterkit/src/pic32mz_spi.c

@@ -121,13 +121,13 @@ enum spi_dev_e;
 #ifdef CONFIG_PIC32MZ_SPI1
 void  pic32mz_spi1select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected)
 {
-  spierr("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
+  spiinfo("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
 #warning "Missing logic"
 }
 
 uint8_t pic32mz_spi1status(FAR struct spi_dev_s *dev, enum spi_dev_e devid)
 {
-  spierr("Returning nothing\n");
+  spiinfo("Returning nothing\n");
 #warning "Missing logic"
   return 0;
 }
@@ -143,13 +143,13 @@ int pic32mz_spi1cmddata(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool cm
 #ifdef CONFIG_PIC32MZ_SPI2
 void  pic32mz_spi2select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected)
 {
-  spierr("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
+  spiinfo("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
 #warning "Missing logic"
 }
 
 uint8_t pic32mz_spi2status(FAR struct spi_dev_s *dev, enum spi_dev_e devid)
 {
-  spierr("Returning nothing\n");
+  spiinfo("Returning nothing\n");
 #warning "Missing logic"
   return 0;
 }
@@ -165,13 +165,13 @@ int pic32mz_spi2cmddata(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool cm
 #ifdef CONFIG_PIC32MZ_SPI3
 void  pic32mz_spi3select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected)
 {
-  spierr("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
+  spiinfo("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
 #warning "Missing logic"
 }
 
 uint8_t pic32mz_spi3status(FAR struct spi_dev_s *dev, enum spi_dev_e devid)
 {
-  spierr("Returning nothing\n");
+  spiinfo("Returning nothing\n");
 #warning "Missing logic"
   return 0;
 }
@@ -187,13 +187,13 @@ int pic32mz_spi3cmddata(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool cm
 #ifdef CONFIG_PIC32MZ_SPI4
 void  pic32mz_spi4select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected)
 {
-  spierr("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
+  spiinfo("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
 #warning "Missing logic"
 }
 
 uint8_t pic32mz_spi4status(FAR struct spi_dev_s *dev, enum spi_dev_e devid)
 {
-  spierr("Returning nothing\n");
+  spiinfo("Returning nothing\n");
 #warning "Missing logic"
   return 0;
 }
@@ -209,13 +209,13 @@ int pic32mz_spi4cmddata(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool cm
 #ifdef CONFIG_PIC32MZ_SPI5
 void  pic32mz_spi5select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected)
 {
-  spierr("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
+  spiinfo("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
 #warning "Missing logic"
 }
 
 uint8_t pic32mz_spi5status(FAR struct spi_dev_s *dev, enum spi_dev_e devid)
 {
-  spierr("Returning nothing\n");
+  spiinfo("Returning nothing\n");
 #warning "Missing logic"
   return 0;
 }
@@ -231,13 +231,13 @@ int pic32mz_spi5cmddata(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool cm
 #ifdef CONFIG_PIC32MZ_SPI6
 void  pic32mz_spi6select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected)
 {
-  spierr("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
+  spiinfo("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
 #warning "Missing logic"
 }
 
 uint8_t pic32mz_spi6status(FAR struct spi_dev_s *dev, enum spi_dev_e devid)
 {
-  spierr("Returning nothing\n");
+  spiinfo("Returning nothing\n");
 #warning "Missing logic"
   return 0;
 }

configs/u-blox-c027/src/lpc17_ssp.c

@@ -72,7 +72,7 @@
 
 /* Dump GPIO registers */
 
-#ifdef SSP_VERBOSE
+#ifdef CONFIG_DEBUG_GPIO
 #  define ssp_dumpgpio(m) lpc17_dumpgpio(SDCCS_GPIO, m)
 #else
 #  define ssp_dumpgpio(m)