diff --git a/configs/olimex-lpc1766stk/nettest/defconfig b/configs/olimex-lpc1766stk/nettest/defconfig
index 2520b4737f4..9da6d0b8f9b 100755
--- a/configs/olimex-lpc1766stk/nettest/defconfig
+++ b/configs/olimex-lpc1766stk/nettest/defconfig
@@ -52,7 +52,7 @@
 # CONFIG_DRAM_SIZE - Describes the installed DRAM.
 # CONFIG_DRAM_START - The start address of DRAM (physical)
 # CONFIG_DRAM_END - Last address+1 of installed RAM
-# CONFIG_ARCH_IRQPRIO - The ST32F103Z supports interrupt prioritization
+# CONFIG_ARCH_IRQPRIO - The LPC17xx supports interrupt prioritization
 # CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt
 #   stack. If defined, this symbol is the size of the interrupt
 #   stack in bytes.  If not defined, the user task stacks will be
@@ -102,6 +102,7 @@ CONFIG_LPC17_BUILDROOT=y
 #
 # Individual subsystems can be enabled:
 # (MAINOSC, PLL0, PLL1 and FLASH are controlled in board.h)
+#
 CONFIG_LPC17_ETHERNET=y
 CONFIG_LPC17_USBHOST=n
 CONFIG_LPC17_USBOTG=n
@@ -463,6 +464,7 @@ CONFIG_PREALLOC_TIMERS=8
 # CONFIG_FS_FAT - Enable FAT filesystem support
 # CONFIG_FAT_SECTORSIZE - Max supported sector size
 # CONFIG_FS_ROMFS - Enable ROMFS filesystem support
+#
 CONFIG_FS_FAT=n
 CONFIG_FS_ROMFS=n
 
@@ -709,6 +711,7 @@ CONFIG_EXAMPLE_UIP_DHCPC=n
 # CONFIG_EXAMPLE_NETTEST_NETMASK - Network mask
 # CONFIG_EXAMPLE_NETTEST_CLIENTIP - IP address of the
 #   client side of the test (may be target or host)
+#
 CONFIG_EXAMPLE_NETTEST_SERVER=n
 CONFIG_EXAMPLE_NETTEST_PERFORMANCE=n
 CONFIG_EXAMPLE_NETTEST_NOMAC=y
@@ -771,7 +774,7 @@ CONFIG_EXAMPLES_NSH_TELNET=n
 CONFIG_EXAMPLES_NSH_ARCHINIT=n
 CONFIG_EXAMPLES_NSH_IOBUFFER_SIZE=512
 CONFIG_EXAMPLES_NSH_DHCPC=n
-CONFIG_EXAMPLES_NSH_NOMAC=n
+CONFIG_EXAMPLES_NSH_NOMAC=y
 CONFIG_EXAMPLES_NSH_IPADDR=(10<<24|0<<16|0<<8|2)
 CONFIG_EXAMPLES_NSH_DRIPADDR=(10<<24|0<<16|0<<8|1)
 CONFIG_EXAMPLES_NSH_NETMASK=(255<<24|255<<16|255<<8|0)
diff --git a/configs/olimex-lpc1766stk/nsh/defconfig b/configs/olimex-lpc1766stk/nsh/defconfig
index d8dcf573aec..260d10e0864 100755
--- a/configs/olimex-lpc1766stk/nsh/defconfig
+++ b/configs/olimex-lpc1766stk/nsh/defconfig
@@ -52,7 +52,7 @@
 # CONFIG_DRAM_SIZE - Describes the installed DRAM.
 # CONFIG_DRAM_START - The start address of DRAM (physical)
 # CONFIG_DRAM_END - Last address+1 of installed RAM
-# CONFIG_ARCH_IRQPRIO - The ST32F103Z supports interrupt prioritization
+# CONFIG_ARCH_IRQPRIO - The LPC17xx supports interrupt prioritization
 # CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt
 #   stack. If defined, this symbol is the size of the interrupt
 #   stack in bytes.  If not defined, the user task stacks will be
@@ -102,7 +102,8 @@ CONFIG_LPC17_BUILDROOT=y
 #
 # Individual subsystems can be enabled:
 # (MAINOSC, PLL0, PLL1 and FLASH are controlled in board.h)
-CONFIG_LPC17_ETHERNET=n
+#
+CONFIG_LPC17_ETHERNET=y
 CONFIG_LPC17_USBHOST=n
 CONFIG_LPC17_USBOTG=n
 CONFIG_LPC17_USBDEV=n
@@ -113,8 +114,8 @@ CONFIG_LPC17_UART3=n
 CONFIG_LPC17_CAN1=n
 CONFIG_LPC17_CAN2=n
 CONFIG_LPC17_SPI=n
-CONFIG_LPC17_SSP0=y
-CONFIG_LPC17_SSP1=n
+CONFIG_LPC17_SSP0=n
+CONFIG_LPC17_SSP1=y
 CONFIG_LPC17_I2C0=n
 CONFIG_LPC17_I2C1=n
 CONFIG_LPC17_I2S=n
@@ -194,6 +195,8 @@ CONFIG_UART3_2STOP=0
 # CONFIG_NET_PRIORITY - Ethernet interrupt priority.  The is default is
 #   the higest priority.
 # CONFIG_NET_WOL - Enable Wake-up on Lan (not fully implemented).
+# CONFIG_NET_DUMPPACKET - Dump all received and transmitted packets.
+#   Also needs CONFIG_DEBUG.
 # CONFIG_NET_REGDEBUG - Enabled low level register debug.  Also needs
 #   CONFIG_DEBUG.
 # CONFIG_NET_HASH - Enable receipt of near-perfect match frames.
@@ -204,6 +207,10 @@ CONFIG_PHY_KS8721=y
 CONFIG_PHY_AUTONEG=y
 CONFIG_PHY_SPEED100=n
 CONFIG_PHY_FDUPLEX=y
+CONFIG_NET_EMACRAM_SIZE=8192
+CONFIG_NET_NTXDESC=7
+CONFIG_NET_NRXDESC=7
+CONFIG_NET_REGDEBUG=n
 
 #
 # General build options
@@ -456,6 +463,7 @@ CONFIG_PREALLOC_TIMERS=4
 # CONFIG_FS_FAT - Enable FAT filesystem support
 # CONFIG_FAT_SECTORSIZE - Max supported sector size
 # CONFIG_FS_ROMFS - Enable ROMFS filesystem support
+#
 CONFIG_FS_FAT=y
 CONFIG_FS_ROMFS=n
 
@@ -525,19 +533,21 @@ CONFIG_MMCSD_HAVECARDDETECT=n
 # CONFIG_NET_LLH_LEN - The link level header length
 # CONFIG_NET_FWCACHE_SIZE - number of packets to remember when looking for duplicates
 #
-CONFIG_NET=n
+CONFIG_NET=y
 CONFIG_NET_IPv6=n
-CONFIG_NSOCKET_DESCRIPTORS=0
+CONFIG_NSOCKET_DESCRIPTORS=8
 CONFIG_NET_SOCKOPTS=y
-CONFIG_NET_BUFSIZE=420
-CONFIG_NET_TCP=n
-CONFIG_NET_TCP_CONNS=40
-CONFIG_NET_MAX_LISTENPORTS=40
-CONFIG_NET_UDP=n
+CONFIG_NET_BUFSIZE=562
+CONFIG_NET_TCP=y
+CONFIG_NET_TCP_CONNS=8
+CONFIG_NET_NTCP_READAHEAD_BUFFERS=16
+CONFIG_NET_TCPBACKLOG=n
+CONFIG_NET_MAX_LISTENPORTS=8
+CONFIG_NET_UDP=y
 CONFIG_NET_UDP_CHECKSUMS=y
-#CONFIG_NET_UDP_CONNS=10
-CONFIG_NET_ICMP=n
-CONFIG_NET_ICMP_PING=n
+#CONFIG_NET_UDP_CONNS=8
+CONFIG_NET_ICMP=y
+CONFIG_NET_ICMP_PING=y
 #CONFIG_NET_PINGADDRCONF=0
 CONFIG_NET_STATISTICS=y
 #CONFIG_NET_RECEIVE_WINDOW=
@@ -700,6 +710,7 @@ CONFIG_EXAMPLE_UIP_DHCPC=n
 # CONFIG_EXAMPLE_NETTEST_NETMASK - Network mask
 # CONFIG_EXAMPLE_NETTEST_CLIENTIP - IP address of the
 #   client side of the test (may be target or host)
+#
 CONFIG_EXAMPLE_NETTEST_SERVER=n
 CONFIG_EXAMPLE_NETTEST_PERFORMANCE=n
 CONFIG_EXAMPLE_NETTEST_NOMAC=y
@@ -708,7 +719,6 @@ CONFIG_EXAMPLE_NETTEST_DRIPADDR=(10L<<24|0L<<16|0L<<8|1L)
 CONFIG_EXAMPLE_NETTEST_NETMASK=(255L<<24|255L<<16|255L<<8|0L)
 CONFIG_EXAMPLE_NETTEST_CLIENTIP=(10L<<24|0L<<16|0L<<8|1L)
 
-#
 #
 # Settings for examples/ostest
 #
@@ -763,7 +773,7 @@ CONFIG_EXAMPLES_NSH_TELNET=n
 CONFIG_EXAMPLES_NSH_ARCHINIT=y
 CONFIG_EXAMPLES_NSH_IOBUFFER_SIZE=512
 CONFIG_EXAMPLES_NSH_DHCPC=n
-CONFIG_EXAMPLES_NSH_NOMAC=n
+CONFIG_EXAMPLES_NSH_NOMAC=y
 CONFIG_EXAMPLES_NSH_IPADDR=(10<<24|0<<16|0<<8|2)
 CONFIG_EXAMPLES_NSH_DRIPADDR=(10<<24|0<<16|0<<8|1)
 CONFIG_EXAMPLES_NSH_NETMASK=(255<<24|255<<16|255<<8|0)
@@ -779,7 +789,7 @@ CONFIG_EXAMPLES_NSH_FATMOUNTPT=/tmp
 #
 # Architecture-specific NSH options
 #
-CONFIG_EXAMPLES_NSH_MMCSDSPIPORTNO=0
+CONFIG_EXAMPLES_NSH_MMCSDSPIPORTNO=1
 CONFIG_EXAMPLES_NSH_MMCSDSLOTNO=0
 CONFIG_EXAMPLES_NSH_MMCSDMINOR=0
 
diff --git a/configs/olimex-lpc1766stk/ostest/defconfig b/configs/olimex-lpc1766stk/ostest/defconfig
index 3b9eb5384c9..fc502222c97 100755
--- a/configs/olimex-lpc1766stk/ostest/defconfig
+++ b/configs/olimex-lpc1766stk/ostest/defconfig
@@ -52,7 +52,7 @@
 # CONFIG_DRAM_SIZE - Describes the installed DRAM.
 # CONFIG_DRAM_START - The start address of DRAM (physical)
 # CONFIG_DRAM_END - Last address+1 of installed RAM
-# CONFIG_ARCH_IRQPRIO - The ST32F103Z supports interrupt prioritization
+# CONFIG_ARCH_IRQPRIO - The LPC17xx supports interrupt prioritization
 # CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt
 #   stack. If defined, this symbol is the size of the interrupt
 #   stack in bytes.  If not defined, the user task stacks will be
@@ -102,6 +102,7 @@ CONFIG_LPC17_BUILDROOT=y
 #
 # Individual subsystems can be enabled:
 # (MAINOSC, PLL0, PLL1 and FLASH are controlled in board.h)
+#
 CONFIG_LPC17_ETHERNET=n
 CONFIG_LPC17_USBHOST=n
 CONFIG_LPC17_USBOTG=n
@@ -456,6 +457,7 @@ CONFIG_PREALLOC_TIMERS=4
 # CONFIG_FS_FAT - Enable FAT filesystem support
 # CONFIG_FAT_SECTORSIZE - Max supported sector size
 # CONFIG_FS_ROMFS - Enable ROMFS filesystem support
+#
 CONFIG_FS_FAT=n
 CONFIG_FS_ROMFS=n
 
@@ -700,6 +702,7 @@ CONFIG_EXAMPLE_UIP_DHCPC=n
 # CONFIG_EXAMPLE_NETTEST_NETMASK - Network mask
 # CONFIG_EXAMPLE_NETTEST_CLIENTIP - IP address of the
 #   client side of the test (may be target or host)
+#
 CONFIG_EXAMPLE_NETTEST_SERVER=n
 CONFIG_EXAMPLE_NETTEST_PERFORMANCE=n
 CONFIG_EXAMPLE_NETTEST_NOMAC=y
@@ -708,8 +711,6 @@ CONFIG_EXAMPLE_NETTEST_DRIPADDR=(10L<<24|0L<<16|0L<<8|1L)
 CONFIG_EXAMPLE_NETTEST_NETMASK=(255L<<24|255L<<16|255L<<8|0L)
 CONFIG_EXAMPLE_NETTEST_CLIENTIP=(10L<<24|0L<<16|0L<<8|1L)
 
-#
-
 #
 # Settings for examples/ostest
 #
diff --git a/configs/olimex-lpc1766stk/src/up_nsh.c b/configs/olimex-lpc1766stk/src/up_nsh.c
index 16a687b07aa..3c76d96f111 100755
--- a/configs/olimex-lpc1766stk/src/up_nsh.c
+++ b/configs/olimex-lpc1766stk/src/up_nsh.c
@@ -56,33 +56,25 @@
 /* PORT and SLOT number probably depend on the board configuration */
 
 #ifdef CONFIG_ARCH_BOARD_LPC1766STK
-#  define CONFIG_EXAMPLES_NSH_HAVEUSBDEV 1
 #  define CONFIG_EXAMPLES_NSH_HAVEMMCSD  1
-#  if !defined(CONFIG_EXAMPLES_NSH_MMCSDSPIPORTNO) || CONFIG_EXAMPLES_NSH_MMCSDSPIPORTNO != 0
-#    error "The LPC1766-STK MMC/SD is on SSP0"
+#  if !defined(CONFIG_EXAMPLES_NSH_MMCSDSPIPORTNO) || CONFIG_EXAMPLES_NSH_MMCSDSPIPORTNO != 1
+#    error "The LPC1766-STK MMC/SD is on SSP1"
 #    undef CONFIG_EXAMPLES_NSH_MMCSDSPIPORTNO
-#    define CONFIG_EXAMPLES_NSH_MMCSDSPIPORTNO 0
+#    define CONFIG_EXAMPLES_NSH_MMCSDSPIPORTNO 1
 #  endif
 #  if !defined(CONFIG_EXAMPLES_NSH_MMCSDSLOTNO) || CONFIG_EXAMPLES_NSH_MMCSDSLOTNO != 0
 #    error "The LPC1766-STK MMC/SD is only one slot (0)"
 #    undef CONFIG_EXAMPLES_NSH_MMCSDSLOTNO
 #    define CONFIG_EXAMPLES_NSH_MMCSDSLOTNO 0
 #  endif
-#  ifndef CONFIG_LPC17_SSP0
-#    warning "CONFIG_LPC17_SSP0 is not enabled"
+#  ifndef CONFIG_LPC17_SSP1
+#    warning "CONFIG_LPC17_SSP1 is not enabled"
 #  endif
 #else
 #  error "Unrecognized board"
-#  undef CONFIG_EXAMPLES_NSH_HAVEUSBDEV
 #  undef CONFIG_EXAMPLES_NSH_HAVEMMCSD
 #endif
 
-/* Can't support USB features if USB is not enabled */
-
-#ifndef CONFIG_USBDEV
-#  undef CONFIG_EXAMPLES_NSH_HAVEUSBDEV
-#endif
-
 /* Can't support MMC/SD features if mountpoints are disabled */
 
 #if defined(CONFIG_DISABLE_MOUNTPOINT)
diff --git a/configs/olimex-lpc1766stk/src/up_ssp.c b/configs/olimex-lpc1766stk/src/up_ssp.c
index 9ae27e0af9a..9a1e72aad99 100755
--- a/configs/olimex-lpc1766stk/src/up_ssp.c
+++ b/configs/olimex-lpc1766stk/src/up_ssp.c
@@ -52,8 +52,6 @@
 #include "lpc17_internal.h"
 #include "lpc1766stk_internal.h"
 
-/* The LM3S6965 Eval Kit microSD CS is on SSI0 */
-
 #if defined(CONFIG_LPC17_SSP0) || defined(CONFIG_LPC17_SSP1)
 
 /************************************************************************************
@@ -100,7 +98,7 @@
  * Name: lpc17_sspinitialize
  *
  * Description:
- *   Called to configure SPI chip select GPIO pins for the LM3S6965 Eval Kit.
+ *   Called to configure SPI chip select GPIO pins for the LPC1766-STK.
  *
  ************************************************************************************/
 
@@ -157,7 +155,7 @@ void  lpc17_ssp0select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool sel
       /* Assert/de-assert the CS pin to the card */
 
       ssp_dumpssp0gpio("lpc17_ssp0select() Entry");
-      lm3s_gpiowrite(LPC1766STK_LCD_CS, !selected);
+      lpc17_gpiowrite(LPC1766STK_LCD_CS, !selected);
       ssp_dumpssp0gpio("lpc17_ssp0select() Exit");
     }
 }
@@ -178,7 +176,7 @@ void  lpc17_ssp1select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool sel
       /* Assert/de-assert the CS pin to the card */
 
       ssp_dumpssp1gpio("lpc17_ssp1select() Entry");
-      lm3s_gpiowrite(LPC1766STK_MMC_CS, !selected);
+      lpc17_gpiowrite(LPC1766STK_MMC_CS, !selected);
       ssp_dumpssp1gpio("lpc17_ssp1select() Exit");
     }
 }
diff --git a/configs/olimex-lpc1766stk/thttpd/defconfig b/configs/olimex-lpc1766stk/thttpd/defconfig
index f8eebba3526..d85afadc013 100755
--- a/configs/olimex-lpc1766stk/thttpd/defconfig
+++ b/configs/olimex-lpc1766stk/thttpd/defconfig
@@ -52,7 +52,7 @@
 # CONFIG_DRAM_SIZE - Describes the installed DRAM.
 # CONFIG_DRAM_START - The start address of DRAM (physical)
 # CONFIG_DRAM_END - Last address+1 of installed RAM
-# CONFIG_ARCH_IRQPRIO - The ST32F103Z supports interrupt prioritization
+# CONFIG_ARCH_IRQPRIO - The LPC17xx supports interrupt prioritization
 # CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt
 #   stack. If defined, this symbol is the size of the interrupt
 #   stack in bytes.  If not defined, the user task stacks will be
@@ -102,6 +102,7 @@ CONFIG_LPC17_BUILDROOT=y
 #
 # Individual subsystems can be enabled:
 # (MAINOSC, PLL0, PLL1 and FLASH are controlled in board.h)
+#
 CONFIG_LPC17_ETHERNET=y
 CONFIG_LPC17_USBHOST=n
 CONFIG_LPC17_USBOTG=n
@@ -472,6 +473,7 @@ CONFIG_PREALLOC_TIMERS=8
 # CONFIG_FS_FAT - Enable FAT filesystem support
 # CONFIG_FAT_SECTORSIZE - Max supported sector size
 # CONFIG_FS_ROMFS - Enable ROMFS filesystem support
+#
 CONFIG_FS_FAT=n
 CONFIG_FS_ROMFS=y
 
@@ -753,6 +755,7 @@ CONFIG_USBSTRG_REMOVABLE=y
 # CONFIG_THTTPD_GENERATE_INDICES
 # CONFIG_THTTPD_URLPATTERN - If defined, then it will be used to match
 #   and verify referrers.
+#
 CONFIG_THTTPD_PORT=80
 CONFIG_THTTPD_IPADDR=(10<<24|0<<16|0<<8|2)
 CONFIG_THTTPD_SERVER_ADDRESS="http://www.nuttx.org"
@@ -807,6 +810,7 @@ CONFIG_EXAMPLE_UIP_DHCPC=n
 # CONFIG_EXAMPLE_NETTEST_NETMASK - Network mask
 # CONFIG_EXAMPLE_NETTEST_CLIENTIP - IP address of the
 #   client side of the test (may be target or host)
+#
 CONFIG_EXAMPLE_NETTEST_SERVER=n
 CONFIG_EXAMPLE_NETTEST_PERFORMANCE=n
 CONFIG_EXAMPLE_NETTEST_NOMAC=y
diff --git a/configs/olimex-lpc1766stk/usbserial/defconfig b/configs/olimex-lpc1766stk/usbserial/defconfig
index 29b78e72b60..175da804eae 100755
--- a/configs/olimex-lpc1766stk/usbserial/defconfig
+++ b/configs/olimex-lpc1766stk/usbserial/defconfig
@@ -52,7 +52,7 @@
 # CONFIG_DRAM_SIZE - Describes the installed DRAM.
 # CONFIG_DRAM_START - The start address of DRAM (physical)
 # CONFIG_DRAM_END - Last address+1 of installed RAM
-# CONFIG_ARCH_IRQPRIO - The ST32F103Z supports interrupt prioritization
+# CONFIG_ARCH_IRQPRIO - The LPC17xx supports interrupt prioritization
 # CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt
 #   stack. If defined, this symbol is the size of the interrupt
 #   stack in bytes.  If not defined, the user task stacks will be
@@ -102,6 +102,7 @@ CONFIG_LPC17_BUILDROOT=y
 #
 # Individual subsystems can be enabled:
 # (MAINOSC, PLL0, PLL1 and FLASH are controlled in board.h)
+#
 CONFIG_LPC17_ETHERNET=n
 CONFIG_LPC17_USBHOST=n
 CONFIG_LPC17_USBOTG=n
@@ -457,6 +458,7 @@ CONFIG_PREALLOC_TIMERS=4
 # CONFIG_FS_FAT - Enable FAT filesystem support
 # CONFIG_FAT_SECTORSIZE - Max supported sector size
 # CONFIG_FS_ROMFS - Enable ROMFS filesystem support
+#
 CONFIG_FS_FAT=n
 CONFIG_FS_ROMFS=n
 
@@ -701,6 +703,7 @@ CONFIG_EXAMPLE_UIP_DHCPC=n
 # CONFIG_EXAMPLE_NETTEST_NETMASK - Network mask
 # CONFIG_EXAMPLE_NETTEST_CLIENTIP - IP address of the
 #   client side of the test (may be target or host)
+#
 CONFIG_EXAMPLE_NETTEST_SERVER=n
 CONFIG_EXAMPLE_NETTEST_PERFORMANCE=n
 CONFIG_EXAMPLE_NETTEST_NOMAC=y
@@ -709,8 +712,6 @@ CONFIG_EXAMPLE_NETTEST_DRIPADDR=(10L<<24|0L<<16|0L<<8|1L)
 CONFIG_EXAMPLE_NETTEST_NETMASK=(255L<<24|255L<<16|255L<<8|0L)
 CONFIG_EXAMPLE_NETTEST_CLIENTIP=(10L<<24|0L<<16|0L<<8|1L)
 
-#
-
 #
 # Settings for examples/ostest
 #
@@ -842,6 +843,7 @@ CONFIG_EXAMPLES_USBSERIAL_TRACEINTERRUPTS=n
 #    Show controller events
 #  CONFIG_EXAMPLES_USBSTRG_TRACEINTERRUPTS
 #    Show interrupt-related events.
+#
 CONFIG_EXAMPLES_USBSTRG_NLUNS=1
 CONFIG_EXAMPLES_USBSTRG_DEVMINOR1=0
 CONFIG_EXAMPLES_USBSTRG_DEVPATH1="/dev/mmcsd0"
diff --git a/configs/olimex-lpc1766stk/usbstorage/defconfig b/configs/olimex-lpc1766stk/usbstorage/defconfig
index 99619b98ab5..d070a247a9f 100755
--- a/configs/olimex-lpc1766stk/usbstorage/defconfig
+++ b/configs/olimex-lpc1766stk/usbstorage/defconfig
@@ -52,7 +52,7 @@
 # CONFIG_DRAM_SIZE - Describes the installed DRAM.
 # CONFIG_DRAM_START - The start address of DRAM (physical)
 # CONFIG_DRAM_END - Last address+1 of installed RAM
-# CONFIG_ARCH_IRQPRIO - The ST32F103Z supports interrupt prioritization
+# CONFIG_ARCH_IRQPRIO - The LPC17xx supports interrupt prioritization
 # CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt
 #   stack. If defined, this symbol is the size of the interrupt
 #   stack in bytes.  If not defined, the user task stacks will be
@@ -102,6 +102,7 @@ CONFIG_LPC17_BUILDROOT=y
 #
 # Individual subsystems can be enabled:
 # (MAINOSC, PLL0, PLL1 and FLASH are controlled in board.h)
+#
 CONFIG_LPC17_ETHERNET=n
 CONFIG_LPC17_USBHOST=n
 CONFIG_LPC17_USBOTG=n
@@ -113,8 +114,8 @@ CONFIG_LPC17_UART3=n
 CONFIG_LPC17_CAN1=n
 CONFIG_LPC17_CAN2=n
 CONFIG_LPC17_SPI=n
-CONFIG_LPC17_SSP0=y
-CONFIG_LPC17_SSP1=n
+CONFIG_LPC17_SSP0=n
+CONFIG_LPC17_SSP1=y
 CONFIG_LPC17_I2C0=n
 CONFIG_LPC17_I2C1=n
 CONFIG_LPC17_I2S=n
@@ -457,6 +458,7 @@ CONFIG_PREALLOC_TIMERS=4
 # CONFIG_FS_FAT - Enable FAT filesystem support
 # CONFIG_FAT_SECTORSIZE - Max supported sector size
 # CONFIG_FS_ROMFS - Enable ROMFS filesystem support
+#
 CONFIG_FS_FAT=n
 CONFIG_FS_ROMFS=n
 
@@ -701,6 +703,7 @@ CONFIG_EXAMPLE_UIP_DHCPC=n
 # CONFIG_EXAMPLE_NETTEST_NETMASK - Network mask
 # CONFIG_EXAMPLE_NETTEST_CLIENTIP - IP address of the
 #   client side of the test (may be target or host)
+#
 CONFIG_EXAMPLE_NETTEST_SERVER=n
 CONFIG_EXAMPLE_NETTEST_PERFORMANCE=n
 CONFIG_EXAMPLE_NETTEST_NOMAC=y
@@ -709,8 +712,6 @@ CONFIG_EXAMPLE_NETTEST_DRIPADDR=(10L<<24|0L<<16|0L<<8|1L)
 CONFIG_EXAMPLE_NETTEST_NETMASK=(255L<<24|255L<<16|255L<<8|0L)
 CONFIG_EXAMPLE_NETTEST_CLIENTIP=(10L<<24|0L<<16|0L<<8|1L)
 
-#
-
 #
 # Settings for examples/ostest
 #
@@ -842,6 +843,7 @@ CONFIG_EXAMPLES_USBSERIAL_TRACEINTERRUPTS=n
 #    Show controller events
 #  CONFIG_EXAMPLES_USBSTRG_TRACEINTERRUPTS
 #    Show interrupt-related events.
+#
 CONFIG_EXAMPLES_USBSTRG_NLUNS=1
 CONFIG_EXAMPLES_USBSTRG_DEVMINOR1=0
 CONFIG_EXAMPLES_USBSTRG_DEVPATH1="/dev/mmcsd0"