Merge branch 'master' into ieee

TODO

@@ -507,7 +507,7 @@ o Kernel/Protected Build
                in the nuttx/ directory.  However, the user interfaces must be
                moved into a NuttX library or into apps/.  Currently
                applications calls to the NxTerm user interfaces are
-               undefined.
+               undefined in the Kernel/Protected builds.
   Status:      Open
   Priority:    Medium
 

arch/arm/src/common/up_initialize.c

@@ -100,13 +100,13 @@ static void up_calibratedelay(void)
  *
  ****************************************************************************/
 
-#if defined(CONFIG_STACK_COLORATION) && CONFIG_ARCH_INTERRUPTSTACK > 3
+#if defined(CONFIG_STACK_COLORATION) && CONFIG_ARCH_INTERRUPTSTACK > 7
 static inline void up_color_intstack(void)
 {
   uint32_t *ptr = (uint32_t *)&g_intstackalloc;
   ssize_t size;
 
-  for (size = (CONFIG_ARCH_INTERRUPTSTACK & ~3);
+  for (size = (CONFIG_ARCH_INTERRUPTSTACK & ~7);
        size > 0;
        size -= sizeof(uint32_t))
     {

arch/arm/src/kinetis/kinetis_sdhc.c

@@ -92,6 +92,18 @@
 #  undef CONFIG_SDIO_XFRDEBUG
 #endif
 
+/* Enable pull-up resistors
+ *
+ * Kinetis does not have pullups on all their development boards
+ * So allow the the board config to enable them.
+ */
+
+#if defined(BOARD_SDHC_ENABLE_PULLUPS)
+#  define BOARD_SDHC_PULLUP_ENABLE _PIN_INPUT_PULLUP
+#else
+#  define BOARD_SDHC_PULLUP_ENABLE 0
+#endif
+
 /* SDCLK frequencies corresponding to various modes of operation.  These
  * values may be provided in either the NuttX configuration file or in
  * the board.h file
@@ -2844,29 +2856,29 @@ FAR struct sdio_dev_s *sdhc_initialize(int slotno)
 #ifndef CONFIG_SDIO_MUXBUS
   /* Data width 1, 4 or 8 */
 
-  kinetis_pinconfig(PIN_SDHC0_D0);
+  kinetis_pinconfig(PIN_SDHC0_D0 | BOARD_SDHC_PULLUP_ENABLE);
 
   /* Data width 4 or 8 */
 
 #ifndef CONFIG_KINETIS_SDHC_WIDTH_D1_ONLY
-  kinetis_pinconfig(PIN_SDHC0_D1);
-  kinetis_pinconfig(PIN_SDHC0_D2);
-  kinetis_pinconfig(PIN_SDHC0_D3);
+  kinetis_pinconfig(PIN_SDHC0_D1 | BOARD_SDHC_PULLUP_ENABLE);
+  kinetis_pinconfig(PIN_SDHC0_D2 | BOARD_SDHC_PULLUP_ENABLE);
+  kinetis_pinconfig(PIN_SDHC0_D3 | BOARD_SDHC_PULLUP_ENABLE);
 
   /* Data width 8 (not supported) */
 
 #if 0
-  kinetis_pinconfig(PIN_SDHC0_D4);
-  kinetis_pinconfig(PIN_SDHC0_D5);
-  kinetis_pinconfig(PIN_SDHC0_D6);
-  kinetis_pinconfig(PIN_SDHC0_D7);
+  kinetis_pinconfig(PIN_SDHC0_D4 | BOARD_SDHC_PULLUP_ENABLE);
+  kinetis_pinconfig(PIN_SDHC0_D5 | BOARD_SDHC_PULLUP_ENABLE);
+  kinetis_pinconfig(PIN_SDHC0_D6 | BOARD_SDHC_PULLUP_ENABLE);
+  kinetis_pinconfig(PIN_SDHC0_D7 | BOARD_SDHC_PULLUP_ENABLE);
 #endif
 #endif
 
   /* Clocking and CMD pins (all data widths) */
 
   kinetis_pinconfig(PIN_SDHC0_DCLK);
-  kinetis_pinconfig(PIN_SDHC0_CMD);
+  kinetis_pinconfig(PIN_SDHC0_CMD | BOARD_SDHC_PULLUP_ENABLE);
 #endif
 
   /* Reset the card and assure that it is in the initial, unconfigured

arch/arm/src/stm32/Kconfig

@@ -1349,6 +1349,7 @@ config STM32_STM32F205
 	bool
 	default n
 	select STM32_HAVE_OTGFS
+	select STM32_HAVE_OTGHS
 	select STM32_HAVE_USART3
 	select STM32_HAVE_UART4
 	select STM32_HAVE_UART5
@@ -2195,7 +2196,7 @@ config STM32_OTGFS
 config STM32_OTGHS
 	bool "OTG HS"
 	default n
-	depends on STM32_STM32F207 || STM32_STM32F40XX || STM32_STM32F429
+	depends on STM32_STM32F205 || STM32_STM32F207 || STM32_STM32F40XX || STM32_STM32F429
 	select USBHOST_HAVE_ASYNCH if USBHOST
 
 config STM32_PWR

arch/arm/src/stm32/chip/stm32f20xxx_pinmap.h

@@ -373,8 +373,8 @@
 #define GPIO_OTGFS_SDA        (GPIO_ALT|GPIO_AF10|GPIO_PORTB|GPIO_PIN9)
 #define GPIO_OTGFS_SOF        (GPIO_ALT|GPIO_FLOAT|GPIO_AF10|GPIO_SPEED_100MHz|GPIO_PUSHPULL|GPIO_PORTA|GPIO_PIN8)
 
-#define GPIO_OTGHS_DM         (GPIO_ALT|GPIO_AF12|GPIO_PORTB|GPIO_PIN14)
-#define GPIO_OTGHS_DP         (GPIO_ALT|GPIO_AF12|GPIO_PORTC|GPIO_PIN15)
+#define GPIO_OTGHS_DM         (GPIO_ALT|GPIO_FLOAT|GPIO_AF12|GPIO_SPEED_100MHz|GPIO_PUSHPULL|GPIO_PORTB|GPIO_PIN14)
+#define GPIO_OTGHS_DP         (GPIO_ALT|GPIO_FLOAT|GPIO_AF12|GPIO_SPEED_100MHz|GPIO_PUSHPULL|GPIO_PORTB|GPIO_PIN15)
 #define GPIO_OTGHS_ID         (GPIO_ALT|GPIO_AF12|GPIO_PORTB|GPIO_PIN12)
 #define GPIO_OTGHS_INTN_1     (GPIO_ALT|GPIO_AF12|GPIO_PORTB|GPIO_PIN1)
 #define GPIO_OTGFS_INTN_2     (GPIO_ALT|GPIO_AF10|GPIO_PORTB|GPIO_PIN6)

arch/arm/src/stm32/chip/stm32f33xxx_adc.h

@@ -49,13 +49,13 @@
  * Pre-processor Definitions
  ****************************************************************************************************/
 
-#define STM32_ADC1_BASE_OFFSET       0x0000
-#define STM32_ADC2_BASE_OFFSET       0x0100
-#define STM32_ADC12_BASE_OFFSET      0x0300
+#define STM32_ADC1_OFFSET            0x0000
+#define STM32_ADC2_OFFSET            0x0100
+#define STM32_ADC12_CMN_OFFSET       0x0300
 
-#define STM32_ADC1_BASE              (STM32_ADC1_BASE_OFFSET+STM32_ADC12_BASE) /* ADC1 Master ADC */
-#define STM32_ADC2_BASE              (STM32_ADC1_BASE_OFFSET+STM32_ADC12_BASE) /* ADC2 Slave ADC */
-#define STM32_ADC12_BASE             (STM32_ADC1_BASE_OFFSET+STM32_ADC12_BASE) /* ADC1, ADC2 common */
+#define STM32_ADC1_BASE              (STM32_ADC1_OFFSET+STM32_ADC12_BASE) /* ADC1 Master ADC */
+#define STM32_ADC2_BASE              (STM32_ADC2_OFFSET+STM32_ADC12_BASE) /* ADC2 Slave ADC */
+#define STM32_ADC12_CMN_BASE         (STM32_ADC12_CMN_OFFSET+STM32_ADC12_BASE) /* ADC1, ADC2 common */
 
 /* Register Offsets *********************************************************************************/
 
@@ -151,9 +151,9 @@
 #define STM32_ADC2_DIFSEL            (STM32_ADC2_BASE+STM32_ADC_DIFSEL_OFFSET)
 #define STM32_ADC2_CALFACT           (STM32_ADC2_BASE+STM32_ADC_CALFACT_OFFSET)
 
-#define STM32_ADC12_CSR              (STM32_ADC12_BASE+STM32_ADC_CSR_OFFSET)
-#define STM32_ADC12_CCR              (STM32_ADC12_BASE+STM32_ADC_CCR_OFFSET)
-#define STM32_ADC12_CDR              (STM32_ADC12_BASE+STM32_ADC_CDR_OFFSET)
+#define STM32_ADC12_CSR              (STM32_ADC12_CMN_BASE+STM32_ADC_CSR_OFFSET)
+#define STM32_ADC12_CCR              (STM32_ADC12_CMN_BASE+STM32_ADC_CCR_OFFSET)
+#define STM32_ADC12_CDR              (STM32_ADC12_CMN_BASE+STM32_ADC_CDR_OFFSET)
 
 /* Register Bitfield Definitions ********************************************************************/
 /* ADC interrupt and status register (ISR) and ADC interrupt enable register (IER) */

arch/arm/src/stm32/stm32_i2c.c

@@ -7,7 +7,7 @@
  *
  * With extensions, modifications by:
  *
- *   Copyright (C) 2011-2014, 2016 Gregory Nutt. All rights reserved.
+ *   Copyright (C) 2011-2014, 2016-2017 Gregory Nutt. All rights reserved.
  *   Author: Gregory Nutt <gnutt@nuttx.org>
  *
  * Redistribution and use in source and binary forms, with or without
@@ -670,15 +670,15 @@ static inline int stm32_i2c_sem_waitdone(FAR struct stm32_i2c_priv_s *priv)
 
   do
     {
+      /* Calculate the elapsed time */
+
+      elapsed = clock_systimer() - start;
+
       /* Poll by simply calling the timer interrupt handler until it
        * reports that it is done.
        */
 
       stm32_i2c_isr(priv);
-
-      /* Calculate the elapsed time */
-
-      elapsed = clock_systimer() - start;
     }
 
   /* Loop until the transfer is complete. */
@@ -729,6 +729,10 @@ static inline void stm32_i2c_sem_waitstop(FAR struct stm32_i2c_priv_s *priv)
   start = clock_systimer();
   do
     {
+      /* Calculate the elapsed time */
+
+      elapsed = clock_systimer() - start;
+
       /* Check for STOP condition */
 
       cr1 = stm32_i2c_getreg(priv, STM32_I2C_CR1_OFFSET);
@@ -744,10 +748,6 @@ static inline void stm32_i2c_sem_waitstop(FAR struct stm32_i2c_priv_s *priv)
         {
           return;
         }
-
-      /* Calculate the elapsed time */
-
-      elapsed = clock_systimer() - start;
     }
 
   /* Loop until the stop is complete or a timeout occurs. */

arch/arm/src/stm32/stm32_i2c_alt.c

@@ -7,7 +7,7 @@
  *
  * With extensions, modifications by:
  *
- *   Copyright (C) 2011-2014, 2016 Gregory Nutt. All rights reserved.
+ *   Copyright (C) 2011-2014, 2016-2017 Gregory Nutt. All rights reserved.
  *   Author: Gregory Nutt <gnutt@nuttx.org>
  *
  *   Copyright( C) 2014 Patrizio Simona. All rights reserved.
@@ -678,15 +678,15 @@ static int stm32_i2c_sem_waitdone(FAR struct stm32_i2c_priv_s *priv)
 
   do
     {
+      /* Calculate the elapsed time */
+
+      elapsed = clock_systimer() - start;
+
       /* Poll by simply calling the timer interrupt handler until it
        * reports that it is done.
        */
 
       stm32_i2c_isr(priv);
-
-      /* Calculate the elapsed time */
-
-      elapsed = clock_systimer() - start;
     }
 
   /* Loop until the transfer is complete. */
@@ -737,6 +737,10 @@ static inline void stm32_i2c_sem_waitstop(FAR struct stm32_i2c_priv_s *priv)
   start = clock_systimer();
   do
     {
+      /* Calculate the elapsed time */
+
+      elapsed = clock_systimer() - start;
+
       /* Check for STOP condition */
 
       cr1 = stm32_i2c_getreg(priv, STM32_I2C_CR1_OFFSET);
@@ -752,10 +756,6 @@ static inline void stm32_i2c_sem_waitstop(FAR struct stm32_i2c_priv_s *priv)
         {
           return;
         }
-
-      /* Calculate the elapsed time */
-
-      elapsed = clock_systimer() - start;
     }
 
   /* Loop until the stop is complete or a timeout occurs. */

arch/arm/src/stm32/stm32_otgfshost.c

@@ -212,6 +212,7 @@ struct stm32_chan_s
   uint8_t           eptype;    /* See OTGFS_EPTYPE_* definitions */
   uint8_t           funcaddr;  /* Device function address */
   uint8_t           speed;     /* Device speed */
+  uint8_t           interval;  /* Interrupt/isochronous EP polling interval */
   uint8_t           pid;       /* Data PID */
   uint8_t           npackets;  /* Number of packets (for data toggle) */
   bool              inuse;     /* True: This channel is "in use" */
@@ -1210,6 +1211,7 @@ static int stm32_ctrlchan_alloc(FAR struct stm32_usbhost_s *priv,
   chan->eptype    = OTGFS_EPTYPE_CTRL;
   chan->funcaddr  = funcaddr;
   chan->speed     = speed;
+  chan->interval  = 0;
   chan->maxpacket = STM32_EP0_DEF_PACKET_SIZE;
   chan->indata1   = false;
   chan->outdata1  = false;
@@ -1234,6 +1236,7 @@ static int stm32_ctrlchan_alloc(FAR struct stm32_usbhost_s *priv,
   chan->eptype    = OTGFS_EPTYPE_CTRL;
   chan->funcaddr  = funcaddr;
   chan->speed     = speed;
+  chan->interval  = 0;
   chan->maxpacket = STM32_EP0_DEF_PACKET_SIZE;
   chan->indata1   = false;
   chan->outdata1  = false;
@@ -1363,6 +1366,7 @@ static int stm32_xfrep_alloc(FAR struct stm32_usbhost_s *priv,
   chan->eptype    = epdesc->xfrtype;
   chan->funcaddr  = hport->funcaddr;
   chan->speed     = hport->speed;
+  chan->interval  = epdesc->interval;
   chan->maxpacket = epdesc->mxpacketsize;
   chan->indata1   = false;
   chan->outdata1  = false;
@@ -1827,6 +1831,7 @@ static ssize_t stm32_in_transfer(FAR struct stm32_usbhost_s *priv, int chidx,
                                  FAR uint8_t *buffer, size_t buflen)
 {
   FAR struct stm32_chan_s *chan;
+  systime_t start;
   ssize_t xfrd;
   int ret;
 
@@ -1841,6 +1846,7 @@ static ssize_t stm32_in_transfer(FAR struct stm32_usbhost_s *priv, int chidx,
   chan->xfrd   = 0;
   xfrd         = 0;
 
+  start = clock_systimer();
   while (chan->xfrd < chan->buflen)
     {
       /* Set up for the wait BEFORE starting the transfer */
@@ -1865,11 +1871,7 @@ static ssize_t stm32_in_transfer(FAR struct stm32_usbhost_s *priv, int chidx,
 
       ret = stm32_chan_wait(priv, chan);
 
-      /* EAGAIN indicates that the device NAKed the transfer.  In the case
-       * of a NAK, we do not retry but rather assume that the transfer is
-       * commplete and return the data that we have received.  Retry could
-       * be handled in class driver.
-       */
+      /* EAGAIN indicates that the device NAKed the transfer. */
 
       if (ret < 0)
         {
@@ -1883,27 +1885,105 @@ static ssize_t stm32_in_transfer(FAR struct stm32_usbhost_s *priv, int chidx,
 
               if (xfrd > 0)
                 {
-                  /* Yes, return the amount of data received */
+                  /* Yes, return the amount of data received.
+                   *
+                   * REVISIT: This behavior is clearly correct for CDC/ACM
+                   * bulk transfers and HID interrupt transfers.  But I am
+                   * not so certain for MSC bulk transfers which, I think,
+                   * could have NAKed packets in the middle of a transfer.
+                   */
 
                   return xfrd;
                 }
               else
                 {
-                  /* No... Break out and return the NAK */
+                  useconds_t delay;
 
-                  return (ssize_t)ret;
+                  /* Get the elapsed time.  Has the timeout elapsed?
+                   * if not then try again.
+                   */
+
+                  systime_t elapsed = clock_systimer() - start;
+                  if (elapsed >= STM32_DATANAK_DELAY)
+                    {
+                      /* Timeout out... break out returning the NAK as
+                       * as a failure.
+                       */
+
+                      return (ssize_t)ret;
+                    }
+
+                  /* Wait a bit before retrying after a NAK. */
+
+                  if (chan->eptype == OTGFS_HCCHAR_EPTYP_INTR)
+                    {
+                      /* For interrupt (and isochronous) endpoints, the
+                       * polling rate is determined by the bInterval field
+                       * of the endpoint descriptor (in units of frames
+                       * which we treat as milliseconds here).
+                       */
+
+                      if (chan->interval > 0)
+                        {
+                          /* Convert the delay to units of microseconds */
+
+                          delay = (useconds_t)chan->interval * 1000;
+                        }
+                      else
+                        {
+                          /* Out of range! For interrupt endpoints, the valid
+                           * range is 1-255 frames.  Assume one frame.
+                           */
+
+                          delay = 1000;
+                        }
+                    }
+                  else
+                    {
+                      /* For Isochronous endpoints, bInterval must be 1.  Bulk
+                       * endpoints do not have a polling interval.  Rather,
+                       * the should wait until data is received.
+                       *
+                       * REVISIT:  For bulk endpoints this 1 msec delay is only
+                       * intended to give the CPU a break from the bulk EP tight
+                       * polling loop.  But are there performance issues?
+                       */
+
+                      delay = 1000;
+                    }
+
+                  /* Wait for the next polling interval.
+                   *
+                   * REVISIT:  This delay could require more resolution than
+                   * is provided by the system timer.  In that case, the
+                   * delay could be significantly longer than required.
+                   */
+
+                  usleep(delay);
                 }
             }
+          else
+            {
+              /* Some unexpected, fatal error occurred. */
 
-          usbhost_trace1(OTGFS_TRACE1_TRNSFRFAILED, ret);
+              usbhost_trace1(OTGFS_TRACE1_TRNSFRFAILED, ret);
 
-          /* Break out and return the error */
+              /* Break out and return the error */
 
-          uerr("ERROR: stm32_chan_wait failed: %d\n", ret);
-          return (ssize_t)ret;
+              uerr("ERROR: stm32_chan_wait failed: %d\n", ret);
+              return (ssize_t)ret;
+            }
         }
+      else
+        {
+          /* Successfully received another chunk of data... add that to the
+           * runing total.  Then continue reading until we read 'buflen'
+           * bytes of data or until the the devices NAKs (implying a short
+           * packet).
+           */
 
-      xfrd += chan->xfrd;
+          xfrd += chan->xfrd;
+        }
     }
 
   return xfrd;
@@ -2513,18 +2593,6 @@ static inline void stm32_gint_hcinisr(FAR struct stm32_usbhost_s *priv,
         }
       else if (chan->chreason == CHREASON_NAK)
         {
-          /* Halt on NAK only happens on an INTR channel.  Fetch the HCCHAR register
-           * and check for an interrupt endpoint.
-           */
-
-          regval = stm32_getreg(STM32_OTGFS_HCCHAR(chidx));
-          if ((regval & OTGFS_HCCHAR_EPTYP_MASK) == OTGFS_HCCHAR_EPTYP_INTR)
-            {
-              /* Toggle the IN data toggle (Used by Bulk and INTR only) */
-
-              chan->indata1 ^= true;
-            }
-
           /* Set the NAK error result */
 
           chan->result = EAGAIN;

arch/arm/src/stm32/stm32_otghsdev.c

@@ -5319,20 +5319,22 @@ static void stm32_hwinitialize(FAR struct stm32_usbdev_s *priv)
 
   stm32_putreg(0xbfffffff, STM32_OTGHS_GINTSTS);
 
+#ifndef BOARD_ENABLE_USBOTG_HSULPI
   /* Disable the ULPI Clock enable in RCC AHB1 Register.  This must
    * be done because if both the ULPI and the FS PHY clock enable bits
    * are set at the same time, the ARM never awakens from WFI due to
    * some bug / errata in the chip.
    */
 
-  regval = stm32_getreg(STM32_RCC_AHB1LPENR);
+  regval  = stm32_getreg(STM32_RCC_AHB1LPENR);
   regval &= ~RCC_AHB1ENR_OTGHSULPIEN;
   stm32_putreg(regval, STM32_RCC_AHB1LPENR);
+#endif
 
   /* Enable the interrupts in the INTMSK */
 
-  regval = (OTGHS_GINT_RXFLVL | OTGHS_GINT_USBSUSP | OTGHS_GINT_ENUMDNE |
-            OTGHS_GINT_IEP | OTGHS_GINT_OEP | OTGHS_GINT_USBRST);
+  regval  = (OTGHS_GINT_RXFLVL | OTGHS_GINT_USBSUSP | OTGHS_GINT_ENUMDNE |
+             OTGHS_GINT_IEP | OTGHS_GINT_OEP | OTGHS_GINT_USBRST);
 
 #ifdef CONFIG_USBDEV_ISOCHRONOUS
   regval |= (OTGHS_GINT_IISOIXFR | OTGHS_GINT_IISOOXFR);

arch/arm/src/stm32/stm32_otghshost.c

@@ -217,6 +217,7 @@ struct stm32_chan_s
   uint8_t           eptype;    /* See OTGHS_EPTYPE_* definitions */
   uint8_t           funcaddr;  /* Device function address */
   uint8_t           speed;     /* Device speed */
+  uint8_t           interval;  /* Interrupt/isochronous EP polling interval */
   uint8_t           pid;       /* Data PID */
   uint8_t           npackets;  /* Number of packets (for data toggle) */
   bool              inuse;     /* True: This channel is "in use" */
@@ -1215,6 +1216,7 @@ static int stm32_ctrlchan_alloc(FAR struct stm32_usbhost_s *priv,
   chan->eptype    = OTGHS_EPTYPE_CTRL;
   chan->funcaddr  = funcaddr;
   chan->speed     = speed;
+  chan->interval  = 0;
   chan->maxpacket = STM32_EP0_DEF_PACKET_SIZE;
   chan->indata1   = false;
   chan->outdata1  = false;
@@ -1239,6 +1241,7 @@ static int stm32_ctrlchan_alloc(FAR struct stm32_usbhost_s *priv,
   chan->eptype    = OTGHS_EPTYPE_CTRL;
   chan->funcaddr  = funcaddr;
   chan->speed     = speed;
+  chan->interval  = 0;
   chan->maxpacket = STM32_EP0_DEF_PACKET_SIZE;
   chan->indata1   = false;
   chan->outdata1  = false;
@@ -1368,6 +1371,7 @@ static int stm32_xfrep_alloc(FAR struct stm32_usbhost_s *priv,
   chan->eptype    = epdesc->xfrtype;
   chan->funcaddr  = hport->funcaddr;
   chan->speed     = hport->speed;
+  chan->interval  = epdesc->interval;
   chan->maxpacket = epdesc->mxpacketsize;
   chan->indata1   = false;
   chan->outdata1  = false;
@@ -1832,6 +1836,7 @@ static ssize_t stm32_in_transfer(FAR struct stm32_usbhost_s *priv, int chidx,
                                  FAR uint8_t *buffer, size_t buflen)
 {
   FAR struct stm32_chan_s *chan;
+  systime_t start;
   ssize_t xfrd;
   int ret;
 
@@ -1846,6 +1851,7 @@ static ssize_t stm32_in_transfer(FAR struct stm32_usbhost_s *priv, int chidx,
   chan->xfrd   = 0;
   xfrd         = 0;
 
+  start = clock_systimer();
   while (chan->xfrd < chan->buflen)
     {
       /* Set up for the wait BEFORE starting the transfer */
@@ -1870,11 +1876,7 @@ static ssize_t stm32_in_transfer(FAR struct stm32_usbhost_s *priv, int chidx,
 
       ret = stm32_chan_wait(priv, chan);
 
-      /* EAGAIN indicates that the device NAKed the transfer.  In the case
-       * of a NAK, we do not retry but rather assume that the transfer is
-       * commplete and return the data that we have received.  Retry could
-       * be handled in class driver.
-       */
+      /* EAGAIN indicates that the device NAKed the transfer. */
 
       if (ret < 0)
         {
@@ -1888,27 +1890,105 @@ static ssize_t stm32_in_transfer(FAR struct stm32_usbhost_s *priv, int chidx,
 
               if (xfrd > 0)
                 {
-                  /* Yes, return the amount of data received */
+                  /* Yes, return the amount of data received.
+                   *
+                   * REVISIT: This behavior is clearly correct for CDC/ACM
+                   * bulk transfers and HID interrupt transfers.  But I am
+                   * not so certain for MSC bulk transfers which, I think,
+                   * could have NAKed packets in the middle of a transfer.
+                   */
 
                   return xfrd;
                 }
               else
                 {
-                  /* No... Break out and return the NAK */
+                  useconds_t delay;
 
-                  return (ssize_t)ret;
+                  /* Get the elapsed time.  Has the timeout elapsed?
+                   * if not then try again.
+                   */
+
+                  systime_t elapsed = clock_systimer() - start;
+                  if (elapsed >= STM32_DATANAK_DELAY)
+                    {
+                      /* Timeout out... break out returning the NAK as
+                       * as a failure.
+                       */
+
+                      return (ssize_t)ret;
+                    }
+
+                  /* Wait a bit before retrying after a NAK. */
+
+                  if (chan->eptype == OTGFS_HCCHAR_EPTYP_INTR)
+                    {
+                      /* For interrupt (and isochronous) endpoints, the
+                       * polling rate is determined by the bInterval field
+                       * of the endpoint descriptor (in units of frames
+                       * which we treat as milliseconds here).
+                       */
+
+                      if (chan->interval > 0)
+                        {
+                          /* Convert the delay to units of microseconds */
+
+                          delay = (useconds_t)chan->interval * 1000;
+                        }
+                      else
+                        {
+                          /* Out of range! For interrupt endpoints, the valid
+                           * range is 1-255 frames.  Assume one frame.
+                           */
+
+                          delay = 1000;
+                        }
+                    }
+                  else
+                    {
+                      /* For Isochronous endpoints, bInterval must be 1.  Bulk
+                       * endpoints do not have a polling interval.  Rather,
+                       * the should wait until data is received.
+                       *
+                       * REVISIT:  For bulk endpoints this 1 msec delay is only
+                       * intended to give the CPU a break from the bulk EP tight
+                       * polling loop.  But are there performance issues?
+                       */
+
+                      delay = 1000;
+                    }
+
+                  /* Wait for the next polling interval.
+                   *
+                   * REVISIT:  This delay could require more resolution than
+                   * is provided by the system timer.  In that case, the
+                   * delay could be significantly longer than required.
+                   */
+
+                  usleep(delay);
                 }
             }
+          else
+            {
+              /* Some unexpected, fatal error occurred. */
 
-          usbhost_trace1(OTGHS_TRACE1_TRNSFRFAILED, ret);
+              usbhost_trace1(OTGHS_TRACE1_TRNSFRFAILED, ret);
 
-          /* Break out and return the error */
+              /* Break out and return the error */
 
-          uerr("ERROR: stm32_chan_wait failed: %d\n", ret);
-          return (ssize_t)ret;
+              uerr("ERROR: stm32_chan_wait failed: %d\n", ret);
+              return (ssize_t)ret;
+            }
         }
+      else
+        {
+          /* Successfully received another chunk of data... add that to the
+           * runing total.  Then continue reading until we read 'buflen'
+           * bytes of data or until the the devices NAKs (implying a short
+           * packet).
+           */
 
-      xfrd += chan->xfrd;
+          xfrd += chan->xfrd;
+        }
     }
 
   return xfrd;
@@ -2518,18 +2598,6 @@ static inline void stm32_gint_hcinisr(FAR struct stm32_usbhost_s *priv,
         }
       else if (chan->chreason == CHREASON_NAK)
         {
-          /* Halt on NAK only happens on an INTR channel.  Fetch the HCCHAR register
-           * and check for an interrupt endpoint.
-           */
-
-          regval = stm32_getreg(STM32_OTGHS_HCCHAR(chidx));
-          if ((regval & OTGHS_HCCHAR_EPTYP_MASK) == OTGHS_HCCHAR_EPTYP_INTR)
-            {
-              /* Toggle the IN data toggle (Used by Bulk and INTR only) */
-
-              chan->indata1 ^= true;
-            }
-
           /* Set the NAK error result */
 
           chan->result = EAGAIN;

arch/arm/src/stm32/stm32f20xxx_rcc.c

@@ -193,10 +193,16 @@ static inline void rcc_enableahb1(void)
 #endif
 
 #ifdef CONFIG_STM32_OTGHS
-  /* USB OTG HS */
+#ifdef BOARD_ENABLE_USBOTG_HSULPI
+  /* Enable clocking for USB OTG HS and external PHY */
 
   regval |= (RCC_AHB1ENR_OTGHSEN | RCC_AHB1ENR_OTGHSULPIEN);
+#else
+  /* Enable only clocking for USB OTG HS */
+
+  regval |= (RCC_AHB1ENR_OTGHSEN);
 #endif
+#endif /* CONFIG_STM32_OTGHS */
 
   putreg32(regval, STM32_RCC_AHB1ENR);   /* Enable peripherals */
 }

arch/arm/src/stm32/stm32f30xxx_i2c.c

@@ -7,7 +7,7 @@
  *
  * With extensions and modifications for the F1, F2, and F4 by:
  *
- *   Copyright (C) 2011-2013, 2016 Gregory Nutt. All rights reserved.
+ *   Copyright (C) 2011-2013, 2016-2017 Gregory Nutt. All rights reserved.
  *   Author: Gregroy Nutt <gnutt@nuttx.org>
  *
  * And this version for the STM32 F3 by
@@ -704,15 +704,15 @@ static inline int stm32_i2c_sem_waitdone(FAR struct stm32_i2c_priv_s *priv)
 
   do
     {
+      /* Calculate the elapsed time */
+
+      elapsed = clock_systimer() - start;
+
       /* Poll by simply calling the timer interrupt handler until it
        * reports that it is done.
        */
 
       stm32_i2c_isr(priv);
-
-      /* Calculate the elapsed time */
-
-      elapsed = clock_systimer() - start;
     }
 
   /* Loop until the transfer is complete. */
@@ -844,6 +844,10 @@ static inline void stm32_i2c_sem_waitstop(FAR struct stm32_i2c_priv_s *priv)
   start = clock_systimer();
   do
     {
+      /* Calculate the elapsed time */
+
+      elapsed = clock_systimer() - start;
+
       /* Check for STOP condition */
 
       cr = stm32_i2c_getreg32(priv, STM32_I2C_CR2_OFFSET);
@@ -860,9 +864,6 @@ static inline void stm32_i2c_sem_waitstop(FAR struct stm32_i2c_priv_s *priv)
           return;
         }
 
-      /* Calculate the elapsed time */
-
-      elapsed = clock_systimer() - start;
     }
 
   /* Loop until the stop is complete or a timeout occurs. */

arch/arm/src/stm32/stm32f40xxx_i2c.c

@@ -7,7 +7,7 @@
  *
  * With extensions, modifications by:
  *
- *   Copyright (C) 2011-2014, 2016 Gregory Nutt. All rights reserved.
+ *   Copyright (C) 2011-2014, 2016-2017 Gregory Nutt. All rights reserved.
  *   Author: Gregory Nutt <gnutt@nuttx.org>
  *
  * Redistribution and use in source and binary forms, with or without
@@ -672,15 +672,15 @@ static inline int stm32_i2c_sem_waitdone(FAR struct stm32_i2c_priv_s *priv)
 
   do
     {
+      /* Calculate the elapsed time */
+
+      elapsed = clock_systimer() - start;
+
       /* Poll by simply calling the timer interrupt handler until it
        * reports that it is done.
        */
 
       stm32_i2c_isr(priv);
-
-      /* Calculate the elapsed time */
-
-      elapsed = clock_systimer() - start;
     }
 
   /* Loop until the transfer is complete. */
@@ -731,6 +731,10 @@ static inline void stm32_i2c_sem_waitstop(FAR struct stm32_i2c_priv_s *priv)
   start = clock_systimer();
   do
     {
+      /* Calculate the elapsed time */
+
+      elapsed = clock_systimer() - start;
+
       /* Check for STOP condition */
 
       cr1 = stm32_i2c_getreg(priv, STM32_I2C_CR1_OFFSET);
@@ -747,9 +751,6 @@ static inline void stm32_i2c_sem_waitstop(FAR struct stm32_i2c_priv_s *priv)
           return;
         }
 
-      /* Calculate the elapsed time */
-
-      elapsed = clock_systimer() - start;
     }
 
   /* Loop until the stop is complete or a timeout occurs. */

arch/arm/src/stm32/stm32f40xxx_rcc.c

@@ -215,10 +215,15 @@ static inline void rcc_enableahb1(void)
 #endif
 
 #ifdef CONFIG_STM32_OTGHS
-  /* USB OTG HS */
+#ifdef BOARD_ENABLE_USBOTG_HSULPI
+  /* Enable clocking for  USB OTG HS and external PHY */
+
+  regval |= (RCC_AHB1ENR_OTGHSEN | RCC_AHB1ENR_OTGHSULPIEN);
+#else
+  /* Enable only clocking for USB OTG HS */
 
   regval |= RCC_AHB1ENR_OTGHSEN;
-
+#endif
 #endif  /* CONFIG_STM32_OTGHS */
 
 #ifdef CONFIG_STM32_DMA2D

arch/arm/src/stm32f7/stm32_i2c.c

@@ -7,7 +7,7 @@
  *
  * With extensions and modifications for the F1, F2, and F4 by:
  *
- *   Copyright (C) 2016 Gregory Nutt. All rights reserved.
+ *   Copyright (C) 2016-2017 Gregory Nutt. All rights reserved.
  *   Authors: Gregroy Nutt <gnutt@nuttx.org>
  *            John Wharington
  *            David Sidrane <david_s5@nscdg.com>
@@ -897,15 +897,15 @@ static inline int stm32_i2c_sem_waitdone(FAR struct stm32_i2c_priv_s *priv)
 
   do
     {
+      /* Calculate the elapsed time */
+
+      elapsed = clock_systimer() - start;
+
       /* Poll by simply calling the timer interrupt handler until it
        * reports that it is done.
        */
 
       stm32_i2c_isr(priv);
-
-      /* Calculate the elapsed time */
-
-      elapsed = clock_systimer() - start;
     }
 
   /* Loop until the transfer is complete. */
@@ -1034,6 +1034,10 @@ static inline void stm32_i2c_sem_waitstop(FAR struct stm32_i2c_priv_s *priv)
   start = clock_systimer();
   do
     {
+      /* Calculate the elapsed time */
+
+      elapsed = clock_systimer() - start;
+
       /* Check for STOP condition */
 
       cr = stm32_i2c_getreg32(priv, STM32_I2C_CR2_OFFSET);
@@ -1050,9 +1054,6 @@ static inline void stm32_i2c_sem_waitstop(FAR struct stm32_i2c_priv_s *priv)
           return;
         }
 
-      /* Calculate the elapsed time */
-
-      elapsed = clock_systimer() - start;
     }
 
   /* Loop until the stop is complete or a timeout occurs. */

arch/arm/src/stm32f7/stm32_otgdev.c

@@ -5446,7 +5446,7 @@ static void stm32_hwinitialize(FAR struct stm32_usbdev_s *priv)
   regval &=  OTG_GINT_RESERVED;
   stm32_putreg(regval | OTG_GINT_RC_W1, STM32_OTG_GINTSTS);
 
-#if defined(CONFIG_STM32F7_OTGHS)
+#if defined(CONFIG_STM32F7_OTGHS) && !defined(BOARD_ENABLE_USBOTG_HSULPI)
   /* Disable the ULPI Clock enable in RCC AHB1 Register.  This must
    * be done because if both the ULPI and the FS PHY clock enable bits
    * are set at the same time, the ARM never awakens from WFI due to

arch/arm/src/stm32f7/stm32_otghost.c

@@ -214,6 +214,7 @@ struct stm32_chan_s
   uint8_t           eptype;    /* See OTG_EPTYPE_* definitions */
   uint8_t           funcaddr;  /* Device function address */
   uint8_t           speed;     /* Device speed */
+  uint8_t           interval;  /* Interrupt/isochronous EP polling interval */
   uint8_t           pid;       /* Data PID */
   uint8_t           npackets;  /* Number of packets (for data toggle) */
   bool              inuse;     /* True: This channel is "in use" */
@@ -1209,6 +1210,7 @@ static int stm32_ctrlchan_alloc(FAR struct stm32_usbhost_s *priv,
   chan->eptype    = OTG_EPTYPE_CTRL;
   chan->funcaddr  = funcaddr;
   chan->speed     = speed;
+  chan->interval  = 0;
   chan->maxpacket = STM32_EP0_DEF_PACKET_SIZE;
   chan->indata1   = false;
   chan->outdata1  = false;
@@ -1233,6 +1235,7 @@ static int stm32_ctrlchan_alloc(FAR struct stm32_usbhost_s *priv,
   chan->eptype    = OTG_EPTYPE_CTRL;
   chan->funcaddr  = funcaddr;
   chan->speed     = speed;
+  chan->interval  = 0;
   chan->maxpacket = STM32_EP0_DEF_PACKET_SIZE;
   chan->indata1   = false;
   chan->outdata1  = false;
@@ -1362,6 +1365,7 @@ static int stm32_xfrep_alloc(FAR struct stm32_usbhost_s *priv,
   chan->eptype    = epdesc->xfrtype;
   chan->funcaddr  = hport->funcaddr;
   chan->speed     = hport->speed;
+  chan->interval  = epdesc->interval;
   chan->maxpacket = epdesc->mxpacketsize;
   chan->indata1   = false;
   chan->outdata1  = false;
@@ -1826,6 +1830,7 @@ static ssize_t stm32_in_transfer(FAR struct stm32_usbhost_s *priv, int chidx,
                                  FAR uint8_t *buffer, size_t buflen)
 {
   FAR struct stm32_chan_s *chan;
+  systime_t start;
   ssize_t xfrd;
   int ret;
 
@@ -1840,6 +1845,7 @@ static ssize_t stm32_in_transfer(FAR struct stm32_usbhost_s *priv, int chidx,
   chan->xfrd   = 0;
   xfrd         = 0;
 
+  start = clock_systimer();
   while (chan->xfrd < chan->buflen)
     {
       /* Set up for the wait BEFORE starting the transfer */
@@ -1864,11 +1870,7 @@ static ssize_t stm32_in_transfer(FAR struct stm32_usbhost_s *priv, int chidx,
 
       ret = stm32_chan_wait(priv, chan);
 
-      /* EAGAIN indicates that the device NAKed the transfer.  In the case
-       * of a NAK, we do not retry but rather assume that the transfer is
-       * commplete and return the data that we have received.  Retry could
-       * be handled in class driver.
-       */
+      /* EAGAIN indicates that the device NAKed the transfer. */
 
       if (ret < 0)
         {
@@ -1882,27 +1884,105 @@ static ssize_t stm32_in_transfer(FAR struct stm32_usbhost_s *priv, int chidx,
 
               if (xfrd > 0)
                 {
-                  /* Yes, return the amount of data received */
+                  /* Yes, return the amount of data received.
+                   *
+                   * REVISIT: This behavior is clearly correct for CDC/ACM
+                   * bulk transfers and HID interrupt transfers.  But I am
+                   * not so certain for MSC bulk transfers which, I think,
+                   * could have NAKed packets in the middle of a transfer.
+                   */
 
                   return xfrd;
                 }
               else
                 {
-                  /* No... Break out and return the NAK */
+                  useconds_t delay;
 
-                  return (ssize_t)ret;
+                  /* Get the elapsed time.  Has the timeout elapsed?
+                   * if not then try again.
+                   */
+
+                  systime_t elapsed = clock_systimer() - start;
+                  if (elapsed >= STM32_DATANAK_DELAY)
+                    {
+                      /* Timeout out... break out returning the NAK as
+                       * as a failure.
+                       */
+
+                      return (ssize_t)ret;
+                    }
+
+                  /* Wait a bit before retrying after a NAK. */
+
+                  if (chan->eptype == OTGFS_HCCHAR_EPTYP_INTR)
+                    {
+                      /* For interrupt (and isochronous) endpoints, the
+                       * polling rate is determined by the bInterval field
+                       * of the endpoint descriptor (in units of frames
+                       * which we treat as milliseconds here).
+                       */
+
+                      if (chan->interval > 0)
+                        {
+                          /* Convert the delay to units of microseconds */
+
+                          delay = (useconds_t)chan->interval * 1000;
+                        }
+                      else
+                        {
+                          /* Out of range! For interrupt endpoints, the valid
+                           * range is 1-255 frames.  Assume one frame.
+                           */
+
+                          delay = 1000;
+                        }
+                    }
+                  else
+                    {
+                      /* For Isochronous endpoints, bInterval must be 1.  Bulk
+                       * endpoints do not have a polling interval.  Rather,
+                       * the should wait until data is received.
+                       *
+                       * REVISIT:  For bulk endpoints this 1 msec delay is only
+                       * intended to give the CPU a break from the bulk EP tight
+                       * polling loop.  But are there performance issues?
+                       */
+
+                      delay = 1000;
+                    }
+
+                  /* Wait for the next polling interval.
+                   *
+                   * REVISIT:  This delay could require more resolution than
+                   * is provided by the system timer.  In that case, the
+                   * delay could be significantly longer than required.
+                   */
+
+                  usleep(delay);
                 }
             }
+          else
+            {
+              /* Some unexpected, fatal error occurred. */
 
-          usbhost_trace1(OTG_TRACE1_TRNSFRFAILED, ret);
+              usbhost_trace1(OTG_TRACE1_TRNSFRFAILED, ret);
 
-          /* Break out and return the error */
+              /* Break out and return the error */
 
-          uerr("ERROR: stm32_chan_wait failed: %d\n", ret);
-          return (ssize_t)ret;
+              uerr("ERROR: stm32_chan_wait failed: %d\n", ret);
+              return (ssize_t)ret;
+            }
         }
+      else
+        {
+          /* Successfully received another chunk of data... add that to the
+           * runing total.  Then continue reading until we read 'buflen'
+           * bytes of data or until the the devices NAKs (implying a short
+           * packet).
+           */
 
-      xfrd += chan->xfrd;
+          xfrd += chan->xfrd;
+        }
     }
 
   return xfrd;
@@ -2512,18 +2592,6 @@ static inline void stm32_gint_hcinisr(FAR struct stm32_usbhost_s *priv,
         }
       else if (chan->chreason == CHREASON_NAK)
         {
-          /* Halt on NAK only happens on an INTR channel.  Fetch the HCCHAR
-           * register and check for an interrupt endpoint.
-           */
-
-          regval = stm32_getreg(STM32_OTG_HCCHAR(chidx));
-          if ((regval & OTG_HCCHAR_EPTYP_MASK) == OTG_HCCHAR_EPTYP_INTR)
-            {
-              /* Toggle the IN data toggle (Used by Bulk and INTR only) */
-
-              chan->indata1 ^= true;
-            }
-
           /* Set the NAK error result */
 
           chan->result = EAGAIN;

arch/arm/src/stm32f7/stm32f74xx75xx_rcc.c

@@ -225,10 +225,15 @@ static inline void rcc_enableahb1(void)
 #endif
 
 #ifdef CONFIG_STM32F7_OTGHS
-  /* USB OTG HS */
+#ifdef BOARD_ENABLE_USBOTG_HSULPI
+  /* Enable clocking for  USB OTG HS and external PHY */
+
+  regval |= (RCC_AHB1ENR_OTGHSEN | RCC_AHB1ENR_OTGHSULPIEN);
+#else
+  /* Enable only clocking for USB OTG HS */
 
   regval |= RCC_AHB1ENR_OTGHSEN;
-
+#endif
 #endif  /* CONFIG_STM32F7_OTGHS */
 
   putreg32(regval, STM32_RCC_AHB1ENR);   /* Enable peripherals */

arch/arm/src/stm32f7/stm32f76xx77xx_rcc.c

@@ -221,10 +221,15 @@ static inline void rcc_enableahb1(void)
 #endif
 
 #ifdef CONFIG_STM32F7_OTGHS
-  /* USB OTG HS */
+#ifdef BOARD_ENABLE_USBOTG_HSULPI
+  /* Enable clocking for  USB OTG HS and external PHY */
+
+  regval |= (RCC_AHB1ENR_OTGHSEN | RCC_AHB1ENR_OTGHSULPIEN);
+#else
+  /* Enable only clocking for USB OTG HS */
 
   regval |= RCC_AHB1ENR_OTGHSEN;
-
+#endif
 #endif  /* CONFIG_STM32F7_OTGHS */
 
   putreg32(regval, STM32_RCC_AHB1ENR);   /* Enable peripherals */

arch/arm/src/stm32l4/stm32l4_i2c.c

@@ -4,7 +4,7 @@
  *
  *   Copyright (C) 2011 Uros Platise. All rights reserved.
  *   Author: Uros Platise <uros.platise@isotel.eu>
- *   Copyright (C) 2011-2013, 2016 Gregory Nutt. All rights reserved.
+ *   Copyright (C) 2011-2013, 2016-2017 Gregory Nutt. All rights reserved.
  *   Author: Gregroy Nutt <gnutt@nuttx.org>
  *   Author: John Wharington
  *   Author: Sebastien Lorquet
@@ -648,15 +648,15 @@ static inline int stm32l4_i2c_sem_waitdone(FAR struct stm32l4_i2c_priv_s *priv)
 
   do
     {
+      /* Calculate the elapsed time */
+
+      elapsed = clock_systimer() - start;
+
       /* Poll by simply calling the timer interrupt handler until it
        * reports that it is done.
        */
 
       stm32l4_i2c_isr(priv);
-
-      /* Calculate the elapsed time */
-
-      elapsed = clock_systimer() - start;
     }
 
   /* Loop until the transfer is complete. */
@@ -788,6 +788,10 @@ static inline void stm32l4_i2c_sem_waitstop(FAR struct stm32l4_i2c_priv_s *priv)
   start = clock_systimer();
   do
     {
+      /* Calculate the elapsed time */
+
+      elapsed = clock_systimer() - start;
+
       /* Check for STOP condition */
 
       cr = stm32l4_i2c_getreg32(priv, STM32L4_I2C_CR2_OFFSET);
@@ -804,9 +808,6 @@ static inline void stm32l4_i2c_sem_waitstop(FAR struct stm32l4_i2c_priv_s *priv)
           return;
         }
 
-      /* Calculate the elapsed time */
-
-      elapsed = clock_systimer() - start;
     }
 
   /* Loop until the stop is complete or a timeout occurs. */

arch/arm/src/stm32l4/stm32l4_otgfshost.c

@@ -213,6 +213,7 @@ struct stm32l4_chan_s
   uint8_t           eptype;    /* See OTGFS_EPTYPE_* definitions */
   uint8_t           funcaddr;  /* Device function address */
   uint8_t           speed;     /* Device speed */
+  uint8_t           interval;  /* Interrupt/isochronous EP polling interval */
   uint8_t           pid;       /* Data PID */
   uint8_t           npackets;  /* Number of packets (for data toggle) */
   bool              inuse;     /* True: This channel is "in use" */
@@ -1212,6 +1213,7 @@ static int stm32l4_ctrlchan_alloc(FAR struct stm32l4_usbhost_s *priv,
   chan->eptype    = OTGFS_EPTYPE_CTRL;
   chan->funcaddr  = funcaddr;
   chan->speed     = speed;
+  chan->interval  = 0;
   chan->maxpacket = STM32L4_EP0_DEF_PACKET_SIZE;
   chan->indata1   = false;
   chan->outdata1  = false;
@@ -1236,6 +1238,7 @@ static int stm32l4_ctrlchan_alloc(FAR struct stm32l4_usbhost_s *priv,
   chan->eptype    = OTGFS_EPTYPE_CTRL;
   chan->funcaddr  = funcaddr;
   chan->speed     = speed;
+  chan->interval  = 0;
   chan->maxpacket = STM32L4_EP0_DEF_PACKET_SIZE;
   chan->indata1   = false;
   chan->outdata1  = false;
@@ -1365,6 +1368,7 @@ static int stm32l4_xfrep_alloc(FAR struct stm32l4_usbhost_s *priv,
   chan->eptype    = epdesc->xfrtype;
   chan->funcaddr  = hport->funcaddr;
   chan->speed     = hport->speed;
+  chan->interval  = epdesc->interval;
   chan->maxpacket = epdesc->mxpacketsize;
   chan->indata1   = false;
   chan->outdata1  = false;
@@ -1831,6 +1835,7 @@ static ssize_t stm32l4_in_transfer(FAR struct stm32l4_usbhost_s *priv,
                                    size_t buflen)
 {
   FAR struct stm32l4_chan_s *chan;
+  systime_t start;
   ssize_t xfrd;
   int ret;
 
@@ -1845,6 +1850,7 @@ static ssize_t stm32l4_in_transfer(FAR struct stm32l4_usbhost_s *priv,
   chan->xfrd   = 0;
   xfrd         = 0;
 
+  start = clock_systimer();
   while (chan->xfrd < chan->buflen)
     {
       /* Set up for the wait BEFORE starting the transfer */
@@ -1869,11 +1875,7 @@ static ssize_t stm32l4_in_transfer(FAR struct stm32l4_usbhost_s *priv,
 
       ret = stm32l4_chan_wait(priv, chan);
 
-      /* EAGAIN indicates that the device NAKed the transfer.  In the case
-       * of a NAK, we do not retry but rather assume that the transfer is
-       * commplete and return the data that we have received.  Retry could
-       * be handled in class driver.
-       */
+      /* EAGAIN indicates that the device NAKed the transfer. */
 
       if (ret < 0)
         {
@@ -1887,27 +1889,105 @@ static ssize_t stm32l4_in_transfer(FAR struct stm32l4_usbhost_s *priv,
 
               if (xfrd > 0)
                 {
-                  /* Yes, return the amount of data received */
+                  /* Yes, return the amount of data received.
+                   *
+                   * REVISIT: This behavior is clearly correct for CDC/ACM
+                   * bulk transfers and HID interrupt transfers.  But I am
+                   * not so certain for MSC bulk transfers which, I think,
+                   * could have NAKed packets in the middle of a transfer.
+                   */
 
                   return xfrd;
                 }
               else
                 {
-                  /* No... Break out and return the NAK */
+                  useconds_t delay;
 
-                  return (ssize_t)ret;
+                  /* Get the elapsed time.  Has the timeout elapsed?
+                   * if not then try again.
+                   */
+
+                  systime_t elapsed = clock_systimer() - start;
+                  if (elapsed >= STM32L4_DATANAK_DELAY)
+                    {
+                      /* Timeout out... break out returning the NAK as
+                       * as a failure.
+                       */
+
+                      return (ssize_t)ret;
+                    }
+
+                  /* Wait a bit before retrying after a NAK. */
+
+                  if (chan->eptype == OTGFS_HCCHAR_EPTYP_INTR)
+                    {
+                      /* For interrupt (and isochronous) endpoints, the
+                       * polling rate is determined by the bInterval field
+                       * of the endpoint descriptor (in units of frames
+                       * which we treat as milliseconds here).
+                       */
+
+                      if (chan->interval > 0)
+                        {
+                          /* Convert the delay to units of microseconds */
+
+                          delay = (useconds_t)chan->interval * 1000;
+                        }
+                      else
+                        {
+                          /* Out of range! For interrupt endpoints, the valid
+                           * range is 1-255 frames.  Assume one frame.
+                           */
+
+                          delay = 1000;
+                        }
+                    }
+                  else
+                    {
+                      /* For Isochronous endpoints, bInterval must be 1.  Bulk
+                       * endpoints do not have a polling interval.  Rather,
+                       * the should wait until data is received.
+                       *
+                       * REVISIT:  For bulk endpoints this 1 msec delay is only
+                       * intended to give the CPU a break from the bulk EP tight
+                       * polling loop.  But are there performance issues?
+                       */
+
+                      delay = 1000;
+                    }
+
+                  /* Wait for the next polling interval.
+                   *
+                   * REVISIT:  This delay could require more resolution than
+                   * is provided by the system timer.  In that case, the
+                   * delay could be significantly longer than required.
+                   */
+
+                  usleep(delay);
                 }
             }
+          else
+            {
+              /* Some unexpected, fatal error occurred. */
 
-          usbhost_trace1(OTGFS_TRACE1_TRNSFRFAILED, ret);
+              usbhost_trace1(OTGFS_TRACE1_TRNSFRFAILED, ret);
 
-          /* Break out and return the error */
+              /* Break out and return the error */
 
-          uerr("ERROR: stm32l4_chan_wait failed: %d\n", ret);
-          return (ssize_t)ret;
+              uerr("ERROR: stm32l4_chan_wait failed: %d\n", ret);
+              return (ssize_t)ret;
+            }
         }
+      else
+        {
+          /* Successfully received another chunk of data... add that to the
+           * runing total.  Then continue reading until we read 'buflen'
+           * bytes of data or until the the devices NAKs (implying a short
+           * packet).
+           */
 
-      xfrd += chan->xfrd;
+          xfrd += chan->xfrd;
+        }
     }
 
   return xfrd;
@@ -2518,18 +2598,6 @@ static inline void stm32l4_gint_hcinisr(FAR struct stm32l4_usbhost_s *priv,
         }
       else if (chan->chreason == CHREASON_NAK)
         {
-          /* Halt on NAK only happens on an INTR channel.  Fetch the HCCHAR register
-           * and check for an interrupt endpoint.
-           */
-
-          regval = stm32l4_getreg(STM32L4_OTGFS_HCCHAR(chidx));
-          if ((regval & OTGFS_HCCHAR_EPTYP_MASK) == OTGFS_HCCHAR_EPTYP_INTR)
-            {
-              /* Toggle the IN data toggle (Used by Bulk and INTR only) */
-
-              chan->indata1 ^= true;
-            }
-
           /* Set the NAK error result */
 
           chan->result = EAGAIN;

configs/Kconfig

@@ -155,6 +155,16 @@ config ARCH_BOARD_ESP32CORE
 		of two CPUs is symmetric, meaning they use the same addresses to
 		access the same memory.
 
+config ARCH_BOARD_EZ80F910200KITG
+	bool "ZiLOG ez80f910200kitg development kit"
+	depends on ARCH_CHIP_EZ80F91
+	select ARCH_HAVE_LEDS
+	select ARCH_HAVE_BUTTONS
+	---help---
+		ez80Acclaim! Microcontroller.  This port use the Zilog ez80f910200kitg
+		development kit, eZ80F091 part, and the Zilog ZDS-II Windows command line
+		tools.  The development environment is Cygwin under WinXP.
+
 config ARCH_BOARD_EZ80F910200ZCO
 	bool "ZiLOG ez80f910200zco development kit"
 	depends on ARCH_CHIP_EZ80F91
@@ -946,6 +956,17 @@ config ARCH_BOARD_SPARK
 		(http://www.spark.io).  This board features the STM32103CBT6
 		MCU from STMicro.
 
+config ARCH_BOARD_PHOTON
+	bool "Photon wifi board"
+	depends on ARCH_CHIP_STM32F205RG
+	select ARCH_HAVE_LEDS
+	select ARCH_HAVE_BUTTONS
+	select ARCH_HAVE_IRQBUTTONS
+	---help---
+		A configuration for the Photon from Particle Devices
+		(https://www.particle.io). This board features the STM32F205RGY6
+		MCU from STMicro.
+
 config ARCH_BOARD_STM32_BUTTERFLY2
 	bool "Kamami STM32Butterfly2 development board"
 	depends on ARCH_CHIP_STM32F107VC
@@ -1479,6 +1500,7 @@ config ARCH_BOARD
 	default "shenzhou"                 if ARCH_BOARD_SHENZHOU
 	default "skp16c26"                 if ARCH_BOARD_SKP16C26
 	default "spark"                    if ARCH_BOARD_SPARK
+	default "photon"                   if ARCH_BOARD_PHOTON
 	default "stm32butterfly2"          if ARCH_BOARD_STM32_BUTTERFLY2
 	default "stm32_tiny"               if ARCH_BOARD_STM32_TINY
 	default "stm32f103-minimum"        if ARCH_BOARD_STM32F103_MINIMUM
@@ -1827,6 +1849,9 @@ endif
 if ARCH_BOARD_SPARK
 source "configs/spark/Kconfig"
 endif
+if ARCH_BOARD_PHOTON
+source "configs/photon/Kconfig"
+endif
 if ARCH_BOARD_STM32_BUTTERFLY2
 source "configs/stm32butterfly2/Kconfig"
 endif

configs/README.txt

@@ -519,6 +519,11 @@ configs/p112
   Dave Brooks was successfully funded through Kickstarter for and another
   run of P112 boards in November of 2012.
 
+configs/photon
+  A configuration for the Photon Wifi board from Particle Devices
+  (https://www.particle.io). This board features the STM32F205RGY6 MCU from
+  STMicro.
+
 configs/pic32mx-starterkit
   This directory contains the port of NuttX to the Microchip PIC32 Ethernet
   Starter Kit (DM320004) with the Multimedia Expansion Board (MEB, DM320005).

configs/arduino-due/nsh/defconfig

@@ -60,9 +60,12 @@ CONFIG_ARCH_ARM=y
 # CONFIG_ARCH_AVR is not set
 # CONFIG_ARCH_HC is not set
 # CONFIG_ARCH_MIPS is not set
+# CONFIG_ARCH_MISOC is not set
 # CONFIG_ARCH_RENESAS is not set
+# CONFIG_ARCH_RISCV is not set
 # CONFIG_ARCH_SIM is not set
 # CONFIG_ARCH_X86 is not set
+# CONFIG_ARCH_XTENSA is not set
 # CONFIG_ARCH_Z16 is not set
 # CONFIG_ARCH_Z80 is not set
 CONFIG_ARCH="arm"
@@ -102,7 +105,9 @@ CONFIG_ARCH_CHIP_SAM34=y
 # CONFIG_ARCH_ARM926EJS is not set
 # CONFIG_ARCH_ARM920T is not set
 # CONFIG_ARCH_CORTEXM0 is not set
+# CONFIG_ARCH_CORTEXM23 is not set
 CONFIG_ARCH_CORTEXM3=y
+# CONFIG_ARCH_CORTEXM33 is not set
 # CONFIG_ARCH_CORTEXM4 is not set
 # CONFIG_ARCH_CORTEXM7 is not set
 # CONFIG_ARCH_CORTEXA5 is not set
@@ -188,6 +193,7 @@ CONFIG_ARCH_CHIP_ATSAM3X8E=y
 # CONFIG_ARCH_CHIP_ATSAM4S16B is not set
 # CONFIG_ARCH_CHIP_ATSAM4S8C is not set
 # CONFIG_ARCH_CHIP_ATSAM4S8B is not set
+# CONFIG_ARCH_CHIP_ATSAM4S4C is not set
 # CONFIG_ARCH_CHIP_ATSAM4E16E is not set
 # CONFIG_ARCH_CHIP_ATSAM4E16C is not set
 # CONFIG_ARCH_CHIP_ATSAM4E8E is not set
@@ -289,6 +295,7 @@ CONFIG_ARCH_HAVE_RAMFUNCS=y
 # CONFIG_ARCH_RAMFUNCS is not set
 CONFIG_ARCH_HAVE_RAMVECTORS=y
 # CONFIG_ARCH_RAMVECTORS is not set
+# CONFIG_ARCH_MINIMAL_VECTORTABLE is not set
 
 #
 # Board Settings
@@ -332,13 +339,13 @@ CONFIG_ARCH_BOARD="arduino-due"
 #
 CONFIG_ARCH_HAVE_LEDS=y
 CONFIG_ARCH_LEDS=y
-CONFIG_NSH_MMCSDMINOR=0
 
 #
 # Board-Specific Options
 #
 # CONFIG_ADRUINO_DUE_REV3 is not set
 # CONFIG_ARDUINO_ITHEAD_TFT is not set
+# CONFIG_BOARD_CRASHDUMP is not set
 # CONFIG_LIB_BOARDCTL is not set
 
 #
@@ -357,6 +364,7 @@ CONFIG_DISABLE_ENVIRON=y
 CONFIG_USEC_PER_TICK=10000
 # CONFIG_SYSTEM_TIME64 is not set
 # CONFIG_CLOCK_MONOTONIC is not set
+# CONFIG_ARCH_HAVE_TIMEKEEPING is not set
 # CONFIG_JULIAN_TIME is not set
 CONFIG_START_YEAR=2013
 CONFIG_START_MONTH=6
@@ -369,6 +377,7 @@ CONFIG_PREALLOC_TIMERS=4
 #
 # Tasks and Scheduling
 #
+# CONFIG_SPINLOCK is not set
 # CONFIG_INIT_NONE is not set
 CONFIG_INIT_ENTRYPOINT=y
 # CONFIG_INIT_FILEPATH is not set
@@ -385,6 +394,8 @@ CONFIG_SCHED_WAITPID=y
 #
 # CONFIG_MUTEX_TYPES is not set
 CONFIG_NPTHREAD_KEYS=4
+# CONFIG_PTHREAD_CLEANUP is not set
+# CONFIG_CANCELLATION_POINTS is not set
 
 #
 # Performance Monitoring
@@ -449,6 +460,7 @@ CONFIG_PTHREAD_STACK_DEFAULT=2048
 CONFIG_DISABLE_POLL=y
 CONFIG_DEV_NULL=y
 # CONFIG_DEV_ZERO is not set
+# CONFIG_DEV_URANDOM is not set
 # CONFIG_DEV_LOOP is not set
 
 #
@@ -463,6 +475,9 @@ CONFIG_DEV_NULL=y
 # CONFIG_PWM is not set
 # CONFIG_ARCH_HAVE_I2CRESET is not set
 # CONFIG_I2C is not set
+# CONFIG_ARCH_HAVE_SPI_CRCGENERATION is not set
+# CONFIG_ARCH_HAVE_SPI_CS_CONTROL is not set
+# CONFIG_ARCH_HAVE_SPI_BITORDER is not set
 # CONFIG_SPI is not set
 # CONFIG_I2S is not set
 
@@ -470,6 +485,7 @@ CONFIG_DEV_NULL=y
 # Timer Driver Support
 #
 # CONFIG_TIMER is not set
+# CONFIG_ONESHOT is not set
 # CONFIG_RTC is not set
 # CONFIG_WATCHDOG is not set
 # CONFIG_ANALOG is not set
@@ -477,7 +493,12 @@ CONFIG_DEV_NULL=y
 # CONFIG_VIDEO_DEVICES is not set
 # CONFIG_BCH is not set
 # CONFIG_INPUT is not set
+
+#
+# IO Expander/GPIO Support
+#
 # CONFIG_IOEXPANDER is not set
+# CONFIG_DEV_GPIO is not set
 
 #
 # LCD Driver Support
@@ -549,9 +570,12 @@ CONFIG_UART0_2STOP=0
 # CONFIG_UART0_IFLOWCONTROL is not set
 # CONFIG_UART0_OFLOWCONTROL is not set
 # CONFIG_UART0_DMA is not set
+# CONFIG_PSEUDOTERM is not set
 # CONFIG_USBDEV is not set
 # CONFIG_USBHOST is not set
+# CONFIG_HAVE_USBTRACE is not set
 # CONFIG_DRIVERS_WIRELESS is not set
+# CONFIG_DRIVERS_CONTACTLESS is not set
 
 #
 # System Logging
@@ -565,6 +589,7 @@ CONFIG_SYSLOG_SERIAL_CONSOLE=y
 CONFIG_SYSLOG_CONSOLE=y
 # CONFIG_SYSLOG_NONE is not set
 # CONFIG_SYSLOG_FILE is not set
+# CONFIG_SYSLOG_CHARDEV is not set
 
 #
 # Networking Support
@@ -587,6 +612,7 @@ CONFIG_SYSLOG_CONSOLE=y
 #
 CONFIG_DISABLE_MOUNTPOINT=y
 # CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
+# CONFIG_PSEUDOFS_SOFTLINKS is not set
 # CONFIG_FS_READABLE is not set
 # CONFIG_FS_WRITABLE is not set
 # CONFIG_FS_NAMED_SEMAPHORES is not set
@@ -635,38 +661,101 @@ CONFIG_BUILTIN=y
 #
 # Standard C Library Options
 #
+
+#
+# Standard C I/O
+#
+# CONFIG_STDIO_DISABLE_BUFFERING is not set
 CONFIG_STDIO_BUFFER_SIZE=64
 CONFIG_STDIO_LINEBUFFER=y
 CONFIG_NUNGET_CHARS=2
-# CONFIG_LIBM is not set
 # CONFIG_NOPRINTF_FIELDWIDTH is not set
 # CONFIG_LIBC_FLOATINGPOINT is not set
 CONFIG_LIBC_LONG_LONG=y
-# CONFIG_LIBC_IOCTL_VARIADIC is not set
-CONFIG_LIB_RAND_ORDER=1
+# CONFIG_LIBC_SCANSET is not set
 # CONFIG_EOL_IS_CR is not set
 # CONFIG_EOL_IS_LF is not set
 # CONFIG_EOL_IS_BOTH_CRLF is not set
 CONFIG_EOL_IS_EITHER_CRLF=y
+# CONFIG_MEMCPY_VIK is not set
+# CONFIG_LIBM is not set
+
+#
+# Architecture-Specific Support
+#
+CONFIG_ARCH_LOWPUTC=y
+# CONFIG_ARCH_ROMGETC is not set
+# CONFIG_LIBC_ARCH_MEMCPY is not set
+# CONFIG_LIBC_ARCH_MEMCMP is not set
+# CONFIG_LIBC_ARCH_MEMMOVE is not set
+# CONFIG_LIBC_ARCH_MEMSET is not set
+# CONFIG_LIBC_ARCH_STRCHR is not set
+# CONFIG_LIBC_ARCH_STRCMP is not set
+# CONFIG_LIBC_ARCH_STRCPY is not set
+# CONFIG_LIBC_ARCH_STRNCPY is not set
+# CONFIG_LIBC_ARCH_STRLEN is not set
+# CONFIG_LIBC_ARCH_STRNLEN is not set
+# CONFIG_LIBC_ARCH_ELF is not set
+# CONFIG_ARMV7M_MEMCPY is not set
+
+#
+# stdlib Options
+#
+CONFIG_LIB_RAND_ORDER=1
+
+#
+# Program Execution Options
+#
 # CONFIG_LIBC_EXECFUNCS is not set
 CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=1024
 CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=2048
+
+#
+# errno Decode Support
+#
 # CONFIG_LIBC_STRERROR is not set
 # CONFIG_LIBC_PERROR_STDOUT is not set
-CONFIG_ARCH_LOWPUTC=y
+
+#
+# memcpy/memset Options
+#
+# CONFIG_MEMSET_OPTSPEED is not set
+# CONFIG_LIBC_DLLFCN is not set
+# CONFIG_LIBC_MODLIB is not set
+# CONFIG_LIBC_WCHAR is not set
+# CONFIG_LIBC_LOCALE is not set
+
+#
+# Time/Time Zone Support
+#
 # CONFIG_TIME_EXTENDED is not set
-CONFIG_LIB_SENDFILE_BUFSIZE=512
-# CONFIG_ARCH_ROMGETC is not set
 CONFIG_ARCH_HAVE_TLS=y
+
+#
+# Thread Local Storage (TLS)
+#
 # CONFIG_TLS is not set
+
+#
+# Network-Related Options
+#
+# CONFIG_LIBC_IPv4_ADDRCONV is not set
+# CONFIG_LIBC_IPv6_ADDRCONV is not set
 # CONFIG_LIBC_NETDB is not set
 
+#
+# NETDB Support
+#
+# CONFIG_LIBC_IOCTL_VARIADIC is not set
+CONFIG_LIB_SENDFILE_BUFSIZE=512
+
 #
 # Non-standard Library Support
 #
 # CONFIG_LIB_CRC64_FAST is not set
 # CONFIG_LIB_KBDCODEC is not set
 # CONFIG_LIB_SLCDCODEC is not set
+# CONFIG_LIB_HEX2BIN is not set
 
 #
 # Basic CXX Support
@@ -676,6 +765,11 @@ CONFIG_HAVE_CXX=y
 CONFIG_HAVE_CXXINITIALIZE=y
 CONFIG_CXX_NEWLONG=y
 
+#
+# LLVM C++ Library (libcxx)
+#
+# CONFIG_LIBCXX is not set
+
 #
 # uClibc++ Standard C++ Library
 #
@@ -697,9 +791,9 @@ CONFIG_BUILTIN_PROXY_STACKSIZE=1024
 #
 # Examples
 #
+# CONFIG_EXAMPLES_CCTYPE is not set
 # CONFIG_EXAMPLES_CHAT is not set
 # CONFIG_EXAMPLES_CONFIGDATA is not set
-# CONFIG_EXAMPLES_CPUHOG is not set
 # CONFIG_EXAMPLES_CXXTEST is not set
 # CONFIG_EXAMPLES_DHCPD is not set
 # CONFIG_EXAMPLES_ELF is not set
@@ -728,9 +822,9 @@ CONFIG_EXAMPLES_NSH_CXXINITIALIZE=y
 # CONFIG_EXAMPLES_NXTEXT is not set
 # CONFIG_EXAMPLES_OSTEST is not set
 # CONFIG_EXAMPLES_PCA9635 is not set
-# CONFIG_EXAMPLES_PIPE is not set
 # CONFIG_EXAMPLES_POSIXSPAWN is not set
 # CONFIG_EXAMPLES_PPPD is not set
+# CONFIG_EXAMPLES_RFID_READUID is not set
 # CONFIG_EXAMPLES_RGBLED is not set
 # CONFIG_EXAMPLES_SENDMAIL is not set
 # CONFIG_EXAMPLES_SERIALBLASTER is not set
@@ -740,11 +834,11 @@ CONFIG_EXAMPLES_NSH_CXXINITIALIZE=y
 # CONFIG_EXAMPLES_SMART is not set
 # CONFIG_EXAMPLES_SMART_TEST is not set
 # CONFIG_EXAMPLES_SMP is not set
+# CONFIG_EXAMPLES_STAT is not set
 # CONFIG_EXAMPLES_TCPECHO is not set
 # CONFIG_EXAMPLES_TELNETD is not set
 # CONFIG_EXAMPLES_TIFF is not set
 # CONFIG_EXAMPLES_TOUCHSCREEN is not set
-# CONFIG_EXAMPLES_USBTERM is not set
 # CONFIG_EXAMPLES_WATCHDOG is not set
 # CONFIG_EXAMPLES_WEBSERVER is not set
 
@@ -769,6 +863,7 @@ CONFIG_EXAMPLES_NSH_CXXINITIALIZE=y
 #
 # CONFIG_INTERPRETERS_FICL is not set
 # CONFIG_INTERPRETERS_MICROPYTHON is not set
+# CONFIG_INTERPRETERS_MINIBASIC is not set
 # CONFIG_INTERPRETERS_PCODE is not set
 
 #
@@ -833,12 +928,12 @@ CONFIG_NSH_DISABLE_LOSMART=y
 # CONFIG_NSH_DISABLE_LS is not set
 # CONFIG_NSH_DISABLE_MB is not set
 # CONFIG_NSH_DISABLE_MKDIR is not set
-# CONFIG_NSH_DISABLE_MKFIFO is not set
 # CONFIG_NSH_DISABLE_MKRD is not set
 # CONFIG_NSH_DISABLE_MH is not set
 # CONFIG_NSH_DISABLE_MOUNT is not set
 # CONFIG_NSH_DISABLE_MV is not set
 # CONFIG_NSH_DISABLE_MW is not set
+CONFIG_NSH_DISABLE_PRINTF=y
 # CONFIG_NSH_DISABLE_PS is not set
 # CONFIG_NSH_DISABLE_PUT is not set
 # CONFIG_NSH_DISABLE_PWD is not set
@@ -855,11 +950,13 @@ CONFIG_NSH_DISABLE_LOSMART=y
 # CONFIG_NSH_DISABLE_USLEEP is not set
 # CONFIG_NSH_DISABLE_WGET is not set
 # CONFIG_NSH_DISABLE_XD is not set
+CONFIG_NSH_MMCSDMINOR=0
 
 #
 # Configure Command Options
 #
 # CONFIG_NSH_CMDOPT_DF_H is not set
+# CONFIG_NSH_CMDOPT_DD_STATS is not set
 CONFIG_NSH_CODECS_BUFSIZE=128
 CONFIG_NSH_CMDOPT_HEXDUMP=y
 CONFIG_NSH_FILEIOSIZE=512
@@ -895,7 +992,7 @@ CONFIG_NSH_CONSOLE=y
 # CONFIG_SYSTEM_CLE is not set
 # CONFIG_SYSTEM_CUTERM is not set
 # CONFIG_SYSTEM_FREE is not set
-# CONFIG_LIB_HEX2BIN is not set
+# CONFIG_SYSTEM_HEX2BIN is not set
 # CONFIG_SYSTEM_HEXED is not set
 # CONFIG_SYSTEM_INSTALL is not set
 # CONFIG_SYSTEM_RAMTEST is not set
@@ -905,6 +1002,8 @@ CONFIG_READLINE_ECHO=y
 # CONFIG_READLINE_TABCOMPLETION is not set
 # CONFIG_READLINE_CMD_HISTORY is not set
 # CONFIG_SYSTEM_SUDOKU is not set
+# CONFIG_SYSTEM_SYSTEM is not set
+# CONFIG_SYSTEM_TEE is not set
 # CONFIG_SYSTEM_UBLOXMODEM is not set
 # CONFIG_SYSTEM_VI is not set
 # CONFIG_SYSTEM_ZMODEM is not set

configs/arduino-mega2560/hello/defconfig

@@ -12,8 +12,10 @@ CONFIG_DEFAULT_SMALL=y
 # CONFIG_HOST_OSX is not set
 CONFIG_HOST_WINDOWS=y
 # CONFIG_HOST_OTHER is not set
+CONFIG_TOOLCHAIN_WINDOWS=y
 # CONFIG_WINDOWS_NATIVE is not set
 CONFIG_WINDOWS_CYGWIN=y
+# CONFIG_WINDOWS_UBUNTU is not set
 # CONFIG_WINDOWS_MSYS is not set
 # CONFIG_WINDOWS_OTHER is not set
 
@@ -41,14 +43,16 @@ CONFIG_INTELHEX_BINARY=y
 # CONFIG_ARCH_MATH_H is not set
 # CONFIG_ARCH_FLOAT_H is not set
 # CONFIG_ARCH_STDARG_H is not set
+# CONFIG_ARCH_DEBUG_H is not set
 
 #
 # Debug Options
 #
+CONFIG_DEBUG_ALERT=y
 # CONFIG_DEBUG_FEATURES is not set
-# CONFIG_ARCH_HAVE_HEAPCHECK is not set
 CONFIG_ARCH_HAVE_STACKCHECK=y
 # CONFIG_STACK_COLORATION is not set
+# CONFIG_ARCH_HAVE_HEAPCHECK is not set
 CONFIG_DEBUG_SYMBOLS=y
 CONFIG_ARCH_HAVE_CUSTOMOPT=y
 # CONFIG_DEBUG_NOOPT is not set
@@ -62,9 +66,12 @@ CONFIG_DEBUG_FULLOPT=y
 CONFIG_ARCH_AVR=y
 # CONFIG_ARCH_HC is not set
 # CONFIG_ARCH_MIPS is not set
+# CONFIG_ARCH_MISOC is not set
 # CONFIG_ARCH_RENESAS is not set
+# CONFIG_ARCH_RISCV is not set
 # CONFIG_ARCH_SIM is not set
 # CONFIG_ARCH_X86 is not set
+# CONFIG_ARCH_XTENSA is not set
 # CONFIG_ARCH_Z16 is not set
 # CONFIG_ARCH_Z80 is not set
 CONFIG_ARCH="avr"
@@ -81,6 +88,7 @@ CONFIG_ARCH_FAMILY_AVR=y
 # AVR Configuration Options
 #
 CONFIG_AVR_WINAVR_TOOLCHAIN=y
+# CONFIG_AVR_ATMEL_AVR_TOOLCHAIN is not set
 # CONFIG_AVR_BUILDROOT_TOOLCHAIN is not set
 # CONFIG_AVR_USART1 is not set
 
@@ -97,7 +105,7 @@ CONFIG_ARCH_CHIP_ATMEGA2560=y
 CONFIG_AVR_USART0=y
 
 #
-# Low level UART driver options
+# Low level USART driver options
 #
 
 #
@@ -111,6 +119,7 @@ CONFIG_ARCH_NOINTC=y
 # CONFIG_ARCH_HAVE_COHERENT_DCACHE is not set
 # CONFIG_ARCH_HAVE_ADDRENV is not set
 # CONFIG_ARCH_NEED_ADDRENV_MAPPING is not set
+# CONFIG_ARCH_HAVE_MULTICPU is not set
 # CONFIG_ARCH_HAVE_VFORK is not set
 # CONFIG_ARCH_HAVE_MMU is not set
 # CONFIG_ARCH_HAVE_MPU is not set
@@ -123,6 +132,7 @@ CONFIG_ARCH_STACKDUMP=y
 # CONFIG_ARCH_IDLE_CUSTOM is not set
 # CONFIG_ARCH_HAVE_RAMFUNCS is not set
 # CONFIG_ARCH_HAVE_RAMVECTORS is not set
+# CONFIG_ARCH_MINIMAL_VECTORTABLE is not set
 
 #
 # Board Settings
@@ -167,6 +177,7 @@ CONFIG_ARCH_BOARD="arduino-mega2560"
 #
 # Board-Specific Options
 #
+# CONFIG_BOARD_CRASHDUMP is not set
 # CONFIG_LIB_BOARDCTL is not set
 
 #
@@ -185,6 +196,7 @@ CONFIG_DISABLE_ENVIRON=y
 CONFIG_USEC_PER_TICK=10000
 # CONFIG_SYSTEM_TIME64 is not set
 # CONFIG_CLOCK_MONOTONIC is not set
+# CONFIG_ARCH_HAVE_TIMEKEEPING is not set
 # CONFIG_JULIAN_TIME is not set
 CONFIG_START_YEAR=2011
 CONFIG_START_MONTH=6
@@ -197,6 +209,7 @@ CONFIG_PREALLOC_TIMERS=0
 #
 # Tasks and Scheduling
 #
+# CONFIG_SPINLOCK is not set
 # CONFIG_INIT_NONE is not set
 CONFIG_INIT_ENTRYPOINT=y
 # CONFIG_INIT_FILEPATH is not set
@@ -207,6 +220,7 @@ CONFIG_TASK_NAME_SIZE=0
 CONFIG_MAX_TASKS=4
 # CONFIG_SCHED_HAVE_PARENT is not set
 # CONFIG_SCHED_WAITPID is not set
+# CONFIG_CANCELLATION_POINTS is not set
 
 #
 # Performance Monitoring
@@ -254,6 +268,7 @@ CONFIG_PTHREAD_STACK_DEFAULT=128
 CONFIG_DISABLE_POLL=y
 CONFIG_DEV_NULL=y
 # CONFIG_DEV_ZERO is not set
+# CONFIG_DEV_URANDOM is not set
 # CONFIG_DEV_LOOP is not set
 
 #
@@ -268,6 +283,9 @@ CONFIG_DEV_NULL=y
 # CONFIG_PWM is not set
 # CONFIG_ARCH_HAVE_I2CRESET is not set
 # CONFIG_I2C is not set
+# CONFIG_ARCH_HAVE_SPI_CRCGENERATION is not set
+# CONFIG_ARCH_HAVE_SPI_CS_CONTROL is not set
+# CONFIG_ARCH_HAVE_SPI_BITORDER is not set
 # CONFIG_SPI is not set
 # CONFIG_I2S is not set
 
@@ -275,6 +293,7 @@ CONFIG_DEV_NULL=y
 # Timer Driver Support
 #
 # CONFIG_TIMER is not set
+# CONFIG_ONESHOT is not set
 # CONFIG_RTC is not set
 # CONFIG_WATCHDOG is not set
 # CONFIG_ANALOG is not set
@@ -282,14 +301,27 @@ CONFIG_DEV_NULL=y
 # CONFIG_VIDEO_DEVICES is not set
 # CONFIG_BCH is not set
 # CONFIG_INPUT is not set
+
+#
+# IO Expander/GPIO Support
+#
 # CONFIG_IOEXPANDER is not set
+# CONFIG_DEV_GPIO is not set
+
+#
+# LCD Driver Support
+#
 # CONFIG_LCD is not set
+# CONFIG_SLCD is not set
 
 #
 # LED Support
 #
+# CONFIG_RGBLED is not set
 # CONFIG_PCA9635PW is not set
+# CONFIG_NCP5623C is not set
 # CONFIG_MMCSD is not set
+# CONFIG_MODEM is not set
 # CONFIG_MTD is not set
 # CONFIG_EEPROM is not set
 # CONFIG_PIPES is not set
@@ -298,6 +330,8 @@ CONFIG_DEV_NULL=y
 # CONFIG_SENSORS is not set
 CONFIG_SERIAL=y
 CONFIG_DEV_LOWCONSOLE=y
+# CONFIG_SERIAL_REMOVABLE is not set
+CONFIG_SERIAL_CONSOLE=y
 # CONFIG_16550_UART is not set
 # CONFIG_UART_SERIALDRIVER is not set
 # CONFIG_UART0_SERIALDRIVER is not set
@@ -321,10 +355,6 @@ CONFIG_USART0_SERIALDRIVER=y
 # CONFIG_USART7_SERIALDRIVER is not set
 # CONFIG_USART8_SERIALDRIVER is not set
 # CONFIG_OTHER_UART_SERIALDRIVER is not set
-
-#
-# USART Configuration
-#
 CONFIG_MCU_SERIAL=y
 # CONFIG_SERIAL_IFLOWCONTROL is not set
 # CONFIG_SERIAL_OFLOWCONTROL is not set
@@ -346,19 +376,26 @@ CONFIG_USART0_2STOP=0
 # CONFIG_USART0_IFLOWCONTROL is not set
 # CONFIG_USART0_OFLOWCONTROL is not set
 # CONFIG_USART0_DMA is not set
+# CONFIG_PSEUDOTERM is not set
 # CONFIG_USBDEV is not set
 # CONFIG_USBHOST is not set
+# CONFIG_HAVE_USBTRACE is not set
 # CONFIG_DRIVERS_WIRELESS is not set
-
-#
-# System Logging Device Options
-#
+# CONFIG_DRIVERS_CONTACTLESS is not set
 
 #
 # System Logging
 #
+# CONFIG_ARCH_SYSLOG is not set
 # CONFIG_RAMLOG is not set
-# CONFIG_CONSOLE_SYSLOG is not set
+# CONFIG_SYSLOG_INTBUFFER is not set
+# CONFIG_SYSLOG_TIMESTAMP is not set
+CONFIG_SYSLOG_SERIAL_CONSOLE=y
+# CONFIG_SYSLOG_CHAR is not set
+CONFIG_SYSLOG_CONSOLE=y
+# CONFIG_SYSLOG_NONE is not set
+# CONFIG_SYSLOG_FILE is not set
+# CONFIG_SYSLOG_CHARDEV is not set
 
 #
 # Networking Support
@@ -388,11 +425,6 @@ CONFIG_DISABLE_PSEUDOFS_OPERATIONS=y
 # CONFIG_FS_PROCFS is not set
 # CONFIG_FS_UNIONFS is not set
 
-#
-# System Logging
-#
-# CONFIG_SYSLOG_TIMESTAMP is not set
-
 #
 # Graphics Support
 #
@@ -411,6 +443,10 @@ CONFIG_MM_REGIONS=1
 #
 # CONFIG_AUDIO is not set
 
+#
+# Wireless Support
+#
+
 #
 # Binary Loader
 #
@@ -428,35 +464,95 @@ CONFIG_MM_REGIONS=1
 #
 # Standard C Library Options
 #
+
+#
+# Standard C I/O
+#
+# CONFIG_STDIO_DISABLE_BUFFERING is not set
 CONFIG_STDIO_BUFFER_SIZE=0
 CONFIG_STDIO_LINEBUFFER=y
 CONFIG_NUNGET_CHARS=0
-# CONFIG_LIBM is not set
 # CONFIG_NOPRINTF_FIELDWIDTH is not set
 # CONFIG_LIBC_FLOATINGPOINT is not set
 # CONFIG_LIBC_LONG_LONG is not set
-# CONFIG_LIBC_IOCTL_VARIADIC is not set
-CONFIG_LIB_RAND_ORDER=1
+# CONFIG_LIBC_SCANSET is not set
 # CONFIG_EOL_IS_CR is not set
 # CONFIG_EOL_IS_LF is not set
 # CONFIG_EOL_IS_BOTH_CRLF is not set
 CONFIG_EOL_IS_EITHER_CRLF=y
+# CONFIG_MEMCPY_VIK is not set
+# CONFIG_LIBM is not set
+
+#
+# Architecture-Specific Support
+#
+CONFIG_ARCH_LOWPUTC=y
+# CONFIG_ARCH_ROMGETC is not set
+# CONFIG_LIBC_ARCH_MEMCPY is not set
+# CONFIG_LIBC_ARCH_MEMCMP is not set
+# CONFIG_LIBC_ARCH_MEMMOVE is not set
+# CONFIG_LIBC_ARCH_MEMSET is not set
+# CONFIG_LIBC_ARCH_STRCHR is not set
+# CONFIG_LIBC_ARCH_STRCMP is not set
+# CONFIG_LIBC_ARCH_STRCPY is not set
+# CONFIG_LIBC_ARCH_STRNCPY is not set
+# CONFIG_LIBC_ARCH_STRLEN is not set
+# CONFIG_LIBC_ARCH_STRNLEN is not set
+# CONFIG_LIBC_ARCH_ELF is not set
+
+#
+# stdlib Options
+#
+CONFIG_LIB_RAND_ORDER=1
+
+#
+# Program Execution Options
+#
 # CONFIG_LIBC_EXECFUNCS is not set
 CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=1024
 CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=2048
+
+#
+# errno Decode Support
+#
 # CONFIG_LIBC_STRERROR is not set
 # CONFIG_LIBC_PERROR_STDOUT is not set
-CONFIG_ARCH_LOWPUTC=y
+
+#
+# memcpy/memset Options
+#
+# CONFIG_MEMSET_OPTSPEED is not set
+# CONFIG_LIBC_DLLFCN is not set
+# CONFIG_LIBC_MODLIB is not set
+# CONFIG_LIBC_WCHAR is not set
+# CONFIG_LIBC_LOCALE is not set
+
+#
+# Time/Time Zone Support
+#
 # CONFIG_TIME_EXTENDED is not set
-CONFIG_LIB_SENDFILE_BUFSIZE=512
-# CONFIG_ARCH_ROMGETC is not set
+# CONFIG_ARCH_HAVE_TLS is not set
+
+#
+# Network-Related Options
+#
+# CONFIG_LIBC_IPv4_ADDRCONV is not set
+# CONFIG_LIBC_IPv6_ADDRCONV is not set
 # CONFIG_LIBC_NETDB is not set
 
+#
+# NETDB Support
+#
+# CONFIG_LIBC_IOCTL_VARIADIC is not set
+CONFIG_LIB_SENDFILE_BUFSIZE=512
+
 #
 # Non-standard Library Support
 #
+# CONFIG_LIB_CRC64_FAST is not set
 # CONFIG_LIB_KBDCODEC is not set
 # CONFIG_LIB_SLCDCODEC is not set
+# CONFIG_LIB_HEX2BIN is not set
 
 #
 # Basic CXX Support
@@ -475,17 +571,20 @@ CONFIG_LIB_SENDFILE_BUFSIZE=512
 #
 # Examples
 #
+# CONFIG_EXAMPLES_CCTYPE is not set
+# CONFIG_EXAMPLES_CHAT is not set
 # CONFIG_EXAMPLES_CONFIGDATA is not set
-# CONFIG_EXAMPLES_CPUHOG is not set
 # CONFIG_EXAMPLES_DHCPD is not set
 # CONFIG_EXAMPLES_ELF is not set
 # CONFIG_EXAMPLES_FTPC is not set
 # CONFIG_EXAMPLES_FTPD is not set
 CONFIG_EXAMPLES_HELLO=y
-# CONFIG_EXAMPLES_JSON is not set
+CONFIG_EXAMPLES_HELLO_PRIORITY=100
+CONFIG_EXAMPLES_HELLO_STACKSIZE=2048
 # CONFIG_EXAMPLES_HIDKBD is not set
-# CONFIG_EXAMPLES_KEYPADTEST is not set
 # CONFIG_EXAMPLES_IGMP is not set
+# CONFIG_EXAMPLES_JSON is not set
+# CONFIG_EXAMPLES_KEYPADTEST is not set
 # CONFIG_EXAMPLES_MEDIA is not set
 # CONFIG_EXAMPLES_MM is not set
 # CONFIG_EXAMPLES_MODBUS is not set
@@ -494,37 +593,41 @@ CONFIG_EXAMPLES_HELLO=y
 # CONFIG_EXAMPLES_NSH is not set
 # CONFIG_EXAMPLES_NULL is not set
 # CONFIG_EXAMPLES_NX is not set
-# CONFIG_EXAMPLES_NXTERM is not set
 # CONFIG_EXAMPLES_NXFFS is not set
 # CONFIG_EXAMPLES_NXHELLO is not set
 # CONFIG_EXAMPLES_NXIMAGE is not set
 # CONFIG_EXAMPLES_NXLINES is not set
+# CONFIG_EXAMPLES_NXTERM is not set
 # CONFIG_EXAMPLES_NXTEXT is not set
-# CONFIG_EXAMPLES_OSTEST is not set
 # CONFIG_EXAMPLES_PCA9635 is not set
-# CONFIG_EXAMPLES_PIPE is not set
-# CONFIG_EXAMPLES_POLL is not set
-# CONFIG_EXAMPLES_PPPD is not set
 # CONFIG_EXAMPLES_POSIXSPAWN is not set
-# CONFIG_EXAMPLES_QENCODER is not set
+# CONFIG_EXAMPLES_PPPD is not set
+# CONFIG_EXAMPLES_RFID_READUID is not set
+# CONFIG_EXAMPLES_RGBLED is not set
 # CONFIG_EXAMPLES_SENDMAIL is not set
 # CONFIG_EXAMPLES_SERIALBLASTER is not set
 # CONFIG_EXAMPLES_SERIALRX is not set
 # CONFIG_EXAMPLES_SERLOOP is not set
 # CONFIG_EXAMPLES_SLCD is not set
 # CONFIG_EXAMPLES_SMART is not set
+# CONFIG_EXAMPLES_SMP is not set
+# CONFIG_EXAMPLES_STAT is not set
 # CONFIG_EXAMPLES_TCPECHO is not set
 # CONFIG_EXAMPLES_TELNETD is not set
 # CONFIG_EXAMPLES_TIFF is not set
 # CONFIG_EXAMPLES_TOUCHSCREEN is not set
-# CONFIG_EXAMPLES_WEBSERVER is not set
-# CONFIG_EXAMPLES_USBSERIAL is not set
-# CONFIG_EXAMPLES_USBTERM is not set
 # CONFIG_EXAMPLES_WATCHDOG is not set
+# CONFIG_EXAMPLES_WEBSERVER is not set
 
 #
 # File System Utilities
 #
+# CONFIG_FSUTILS_INIFILE is not set
+
+#
+# GPS Utilities
+#
+# CONFIG_GPSUTILS_MINMEA_LIB is not set
 
 #
 # Graphics Support
@@ -536,8 +639,9 @@ CONFIG_EXAMPLES_HELLO=y
 # Interpreters
 #
 # CONFIG_INTERPRETERS_FICL is not set
-# CONFIG_INTERPRETERS_PCODE is not set
 # CONFIG_INTERPRETERS_MICROPYTHON is not set
+# CONFIG_INTERPRETERS_MINIBASIC is not set
+# CONFIG_INTERPRETERS_PCODE is not set
 
 #
 # FreeModBus
@@ -548,6 +652,7 @@ CONFIG_EXAMPLES_HELLO=y
 # Network Utilities
 #
 # CONFIG_NETUTILS_CODECS is not set
+# CONFIG_NETUTILS_ESP8266 is not set
 # CONFIG_NETUTILS_FTPC is not set
 # CONFIG_NETUTILS_JSON is not set
 # CONFIG_NETUTILS_SMTP is not set
@@ -569,16 +674,17 @@ CONFIG_EXAMPLES_HELLO=y
 #
 # System Libraries and NSH Add-Ons
 #
-# CONFIG_SYSTEM_FREE is not set
 # CONFIG_SYSTEM_CLE is not set
 # CONFIG_SYSTEM_CUTERM is not set
-# CONFIG_SYSTEM_INSTALL is not set
-# CONFIG_LIB_HEX2BIN is not set
-# CONFIG_FSUTILS_INIFILE is not set
+# CONFIG_SYSTEM_FREE is not set
+# CONFIG_SYSTEM_HEX2BIN is not set
 # CONFIG_SYSTEM_HEXED is not set
+# CONFIG_SYSTEM_INSTALL is not set
 # CONFIG_SYSTEM_RAMTEST is not set
 # CONFIG_READLINE_HAVE_EXTMATCH is not set
 # CONFIG_SYSTEM_READLINE is not set
 # CONFIG_SYSTEM_SUDOKU is not set
+# CONFIG_SYSTEM_TEE is not set
+# CONFIG_SYSTEM_UBLOXMODEM is not set
 # CONFIG_SYSTEM_VI is not set
 # CONFIG_SYSTEM_ZMODEM is not set

configs/arduino-mega2560/nsh/defconfig

@@ -12,8 +12,10 @@ CONFIG_DEFAULT_SMALL=y
 # CONFIG_HOST_OSX is not set
 CONFIG_HOST_WINDOWS=y
 # CONFIG_HOST_OTHER is not set
+CONFIG_TOOLCHAIN_WINDOWS=y
 # CONFIG_WINDOWS_NATIVE is not set
 CONFIG_WINDOWS_CYGWIN=y
+# CONFIG_WINDOWS_UBUNTU is not set
 # CONFIG_WINDOWS_MSYS is not set
 # CONFIG_WINDOWS_OTHER is not set
 
@@ -46,10 +48,11 @@ CONFIG_INTELHEX_BINARY=y
 #
 # Debug Options
 #
+CONFIG_DEBUG_ALERT=y
 # CONFIG_DEBUG_FEATURES is not set
-# CONFIG_ARCH_HAVE_HEAPCHECK is not set
 CONFIG_ARCH_HAVE_STACKCHECK=y
 # CONFIG_STACK_COLORATION is not set
+# CONFIG_ARCH_HAVE_HEAPCHECK is not set
 CONFIG_DEBUG_SYMBOLS=y
 CONFIG_ARCH_HAVE_CUSTOMOPT=y
 # CONFIG_DEBUG_NOOPT is not set
@@ -63,9 +66,12 @@ CONFIG_DEBUG_FULLOPT=y
 CONFIG_ARCH_AVR=y
 # CONFIG_ARCH_HC is not set
 # CONFIG_ARCH_MIPS is not set
+# CONFIG_ARCH_MISOC is not set
 # CONFIG_ARCH_RENESAS is not set
+# CONFIG_ARCH_RISCV is not set
 # CONFIG_ARCH_SIM is not set
 # CONFIG_ARCH_X86 is not set
+# CONFIG_ARCH_XTENSA is not set
 # CONFIG_ARCH_Z16 is not set
 # CONFIG_ARCH_Z80 is not set
 CONFIG_ARCH="avr"
@@ -118,6 +124,7 @@ CONFIG_ARCH_NOINTC=y
 # CONFIG_ARCH_HAVE_COHERENT_DCACHE is not set
 # CONFIG_ARCH_HAVE_ADDRENV is not set
 # CONFIG_ARCH_NEED_ADDRENV_MAPPING is not set
+# CONFIG_ARCH_HAVE_MULTICPU is not set
 # CONFIG_ARCH_HAVE_VFORK is not set
 # CONFIG_ARCH_HAVE_MMU is not set
 # CONFIG_ARCH_HAVE_MPU is not set
@@ -130,6 +137,7 @@ CONFIG_ARCH_STACKDUMP=y
 # CONFIG_ARCH_IDLE_CUSTOM is not set
 # CONFIG_ARCH_HAVE_RAMFUNCS is not set
 # CONFIG_ARCH_HAVE_RAMVECTORS is not set
+# CONFIG_ARCH_MINIMAL_VECTORTABLE is not set
 
 #
 # Board Settings
@@ -170,11 +178,11 @@ CONFIG_ARCH_BOARD="arduino-mega2560"
 #
 # Common Board Options
 #
-CONFIG_NSH_MMCSDMINOR=0
 
 #
 # Board-Specific Options
 #
+# CONFIG_BOARD_CRASHDUMP is not set
 # CONFIG_LIB_BOARDCTL is not set
 
 #
@@ -193,6 +201,7 @@ CONFIG_DISABLE_ENVIRON=y
 CONFIG_USEC_PER_TICK=10000
 # CONFIG_SYSTEM_TIME64 is not set
 # CONFIG_CLOCK_MONOTONIC is not set
+# CONFIG_ARCH_HAVE_TIMEKEEPING is not set
 # CONFIG_JULIAN_TIME is not set
 CONFIG_START_YEAR=2011
 CONFIG_START_MONTH=6
@@ -205,6 +214,7 @@ CONFIG_PREALLOC_TIMERS=0
 #
 # Tasks and Scheduling
 #
+# CONFIG_SPINLOCK is not set
 # CONFIG_INIT_NONE is not set
 CONFIG_INIT_ENTRYPOINT=y
 # CONFIG_INIT_FILEPATH is not set
@@ -215,6 +225,7 @@ CONFIG_TASK_NAME_SIZE=0
 CONFIG_MAX_TASKS=4
 # CONFIG_SCHED_HAVE_PARENT is not set
 # CONFIG_SCHED_WAITPID is not set
+# CONFIG_CANCELLATION_POINTS is not set
 
 #
 # Performance Monitoring
@@ -262,6 +273,7 @@ CONFIG_PTHREAD_STACK_DEFAULT=128
 CONFIG_DISABLE_POLL=y
 CONFIG_DEV_NULL=y
 # CONFIG_DEV_ZERO is not set
+# CONFIG_DEV_URANDOM is not set
 # CONFIG_DEV_LOOP is not set
 
 #
@@ -276,6 +288,9 @@ CONFIG_DEV_NULL=y
 # CONFIG_PWM is not set
 # CONFIG_ARCH_HAVE_I2CRESET is not set
 # CONFIG_I2C is not set
+# CONFIG_ARCH_HAVE_SPI_CRCGENERATION is not set
+# CONFIG_ARCH_HAVE_SPI_CS_CONTROL is not set
+# CONFIG_ARCH_HAVE_SPI_BITORDER is not set
 # CONFIG_SPI is not set
 # CONFIG_I2S is not set
 
@@ -283,6 +298,7 @@ CONFIG_DEV_NULL=y
 # Timer Driver Support
 #
 # CONFIG_TIMER is not set
+# CONFIG_ONESHOT is not set
 # CONFIG_RTC is not set
 # CONFIG_WATCHDOG is not set
 # CONFIG_ANALOG is not set
@@ -290,14 +306,27 @@ CONFIG_DEV_NULL=y
 # CONFIG_VIDEO_DEVICES is not set
 # CONFIG_BCH is not set
 # CONFIG_INPUT is not set
+
+#
+# IO Expander/GPIO Support
+#
 # CONFIG_IOEXPANDER is not set
+# CONFIG_DEV_GPIO is not set
+
+#
+# LCD Driver Support
+#
 # CONFIG_LCD is not set
+# CONFIG_SLCD is not set
 
 #
 # LED Support
 #
+# CONFIG_RGBLED is not set
 # CONFIG_PCA9635PW is not set
+# CONFIG_NCP5623C is not set
 # CONFIG_MMCSD is not set
+# CONFIG_MODEM is not set
 # CONFIG_MTD is not set
 # CONFIG_EEPROM is not set
 # CONFIG_PIPES is not set
@@ -306,6 +335,8 @@ CONFIG_DEV_NULL=y
 # CONFIG_SENSORS is not set
 CONFIG_SERIAL=y
 # CONFIG_DEV_LOWCONSOLE is not set
+# CONFIG_SERIAL_REMOVABLE is not set
+CONFIG_SERIAL_CONSOLE=y
 # CONFIG_16550_UART is not set
 # CONFIG_UART_SERIALDRIVER is not set
 # CONFIG_UART0_SERIALDRIVER is not set
@@ -329,10 +360,6 @@ CONFIG_USART0_SERIALDRIVER=y
 # CONFIG_USART7_SERIALDRIVER is not set
 # CONFIG_USART8_SERIALDRIVER is not set
 # CONFIG_OTHER_UART_SERIALDRIVER is not set
-
-#
-# USART Configuration
-#
 CONFIG_MCU_SERIAL=y
 CONFIG_STANDARD_SERIAL=y
 # CONFIG_SERIAL_IFLOWCONTROL is not set
@@ -355,19 +382,26 @@ CONFIG_USART0_2STOP=0
 # CONFIG_USART0_IFLOWCONTROL is not set
 # CONFIG_USART0_OFLOWCONTROL is not set
 # CONFIG_USART0_DMA is not set
+# CONFIG_PSEUDOTERM is not set
 # CONFIG_USBDEV is not set
 # CONFIG_USBHOST is not set
+# CONFIG_HAVE_USBTRACE is not set
 # CONFIG_DRIVERS_WIRELESS is not set
-
-#
-# System Logging Device Options
-#
+# CONFIG_DRIVERS_CONTACTLESS is not set
 
 #
 # System Logging
 #
+# CONFIG_ARCH_SYSLOG is not set
 # CONFIG_RAMLOG is not set
-# CONFIG_CONSOLE_SYSLOG is not set
+# CONFIG_SYSLOG_INTBUFFER is not set
+# CONFIG_SYSLOG_TIMESTAMP is not set
+CONFIG_SYSLOG_SERIAL_CONSOLE=y
+# CONFIG_SYSLOG_CHAR is not set
+CONFIG_SYSLOG_CONSOLE=y
+# CONFIG_SYSLOG_NONE is not set
+# CONFIG_SYSLOG_FILE is not set
+# CONFIG_SYSLOG_CHARDEV is not set
 
 #
 # Networking Support
@@ -397,11 +431,6 @@ CONFIG_DISABLE_PSEUDOFS_OPERATIONS=y
 # CONFIG_FS_PROCFS is not set
 # CONFIG_FS_UNIONFS is not set
 
-#
-# System Logging
-#
-# CONFIG_SYSLOG_TIMESTAMP is not set
-
 #
 # Graphics Support
 #
@@ -420,6 +449,10 @@ CONFIG_MM_REGIONS=1
 #
 # CONFIG_AUDIO is not set
 
+#
+# Wireless Support
+#
+
 #
 # Binary Loader
 #
@@ -437,35 +470,95 @@ CONFIG_MM_REGIONS=1
 #
 # Standard C Library Options
 #
+
+#
+# Standard C I/O
+#
+# CONFIG_STDIO_DISABLE_BUFFERING is not set
 CONFIG_STDIO_BUFFER_SIZE=0
 CONFIG_STDIO_LINEBUFFER=y
 CONFIG_NUNGET_CHARS=0
-# CONFIG_LIBM is not set
 # CONFIG_NOPRINTF_FIELDWIDTH is not set
 # CONFIG_LIBC_FLOATINGPOINT is not set
 # CONFIG_LIBC_LONG_LONG is not set
-# CONFIG_LIBC_IOCTL_VARIADIC is not set
-CONFIG_LIB_RAND_ORDER=1
+# CONFIG_LIBC_SCANSET is not set
 # CONFIG_EOL_IS_CR is not set
 # CONFIG_EOL_IS_LF is not set
 # CONFIG_EOL_IS_BOTH_CRLF is not set
 CONFIG_EOL_IS_EITHER_CRLF=y
+# CONFIG_MEMCPY_VIK is not set
+# CONFIG_LIBM is not set
+
+#
+# Architecture-Specific Support
+#
+CONFIG_ARCH_LOWPUTC=y
+# CONFIG_ARCH_ROMGETC is not set
+# CONFIG_LIBC_ARCH_MEMCPY is not set
+# CONFIG_LIBC_ARCH_MEMCMP is not set
+# CONFIG_LIBC_ARCH_MEMMOVE is not set
+# CONFIG_LIBC_ARCH_MEMSET is not set
+# CONFIG_LIBC_ARCH_STRCHR is not set
+# CONFIG_LIBC_ARCH_STRCMP is not set
+# CONFIG_LIBC_ARCH_STRCPY is not set
+# CONFIG_LIBC_ARCH_STRNCPY is not set
+# CONFIG_LIBC_ARCH_STRLEN is not set
+# CONFIG_LIBC_ARCH_STRNLEN is not set
+# CONFIG_LIBC_ARCH_ELF is not set
+
+#
+# stdlib Options
+#
+CONFIG_LIB_RAND_ORDER=1
+
+#
+# Program Execution Options
+#
 # CONFIG_LIBC_EXECFUNCS is not set
 CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=512
 CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=768
+
+#
+# errno Decode Support
+#
 # CONFIG_LIBC_STRERROR is not set
 # CONFIG_LIBC_PERROR_STDOUT is not set
-CONFIG_ARCH_LOWPUTC=y
+
+#
+# memcpy/memset Options
+#
+# CONFIG_MEMSET_OPTSPEED is not set
+# CONFIG_LIBC_DLLFCN is not set
+# CONFIG_LIBC_MODLIB is not set
+# CONFIG_LIBC_WCHAR is not set
+# CONFIG_LIBC_LOCALE is not set
+
+#
+# Time/Time Zone Support
+#
 # CONFIG_TIME_EXTENDED is not set
-CONFIG_LIB_SENDFILE_BUFSIZE=512
-# CONFIG_ARCH_ROMGETC is not set
+# CONFIG_ARCH_HAVE_TLS is not set
+
+#
+# Network-Related Options
+#
+# CONFIG_LIBC_IPv4_ADDRCONV is not set
+# CONFIG_LIBC_IPv6_ADDRCONV is not set
 # CONFIG_LIBC_NETDB is not set
 
+#
+# NETDB Support
+#
+# CONFIG_LIBC_IOCTL_VARIADIC is not set
+CONFIG_LIB_SENDFILE_BUFSIZE=512
+
 #
 # Non-standard Library Support
 #
+# CONFIG_LIB_CRC64_FAST is not set
 # CONFIG_LIB_KBDCODEC is not set
 # CONFIG_LIB_SLCDCODEC is not set
+# CONFIG_LIB_HEX2BIN is not set
 
 #
 # Basic CXX Support
@@ -484,17 +577,18 @@ CONFIG_LIB_SENDFILE_BUFSIZE=512
 #
 # Examples
 #
+# CONFIG_EXAMPLES_CCTYPE is not set
+# CONFIG_EXAMPLES_CHAT is not set
 # CONFIG_EXAMPLES_CONFIGDATA is not set
-# CONFIG_EXAMPLES_CPUHOG is not set
 # CONFIG_EXAMPLES_DHCPD is not set
 # CONFIG_EXAMPLES_ELF is not set
 # CONFIG_EXAMPLES_FTPC is not set
 # CONFIG_EXAMPLES_FTPD is not set
 # CONFIG_EXAMPLES_HELLO is not set
-# CONFIG_EXAMPLES_JSON is not set
 # CONFIG_EXAMPLES_HIDKBD is not set
-# CONFIG_EXAMPLES_KEYPADTEST is not set
 # CONFIG_EXAMPLES_IGMP is not set
+# CONFIG_EXAMPLES_JSON is not set
+# CONFIG_EXAMPLES_KEYPADTEST is not set
 # CONFIG_EXAMPLES_MEDIA is not set
 # CONFIG_EXAMPLES_MM is not set
 # CONFIG_EXAMPLES_MODBUS is not set
@@ -503,37 +597,41 @@ CONFIG_LIB_SENDFILE_BUFSIZE=512
 CONFIG_EXAMPLES_NSH=y
 # CONFIG_EXAMPLES_NULL is not set
 # CONFIG_EXAMPLES_NX is not set
-# CONFIG_EXAMPLES_NXTERM is not set
 # CONFIG_EXAMPLES_NXFFS is not set
 # CONFIG_EXAMPLES_NXHELLO is not set
 # CONFIG_EXAMPLES_NXIMAGE is not set
 # CONFIG_EXAMPLES_NXLINES is not set
+# CONFIG_EXAMPLES_NXTERM is not set
 # CONFIG_EXAMPLES_NXTEXT is not set
-# CONFIG_EXAMPLES_OSTEST is not set
 # CONFIG_EXAMPLES_PCA9635 is not set
-# CONFIG_EXAMPLES_PIPE is not set
-# CONFIG_EXAMPLES_POLL is not set
-# CONFIG_EXAMPLES_PPPD is not set
 # CONFIG_EXAMPLES_POSIXSPAWN is not set
-# CONFIG_EXAMPLES_QENCODER is not set
+# CONFIG_EXAMPLES_PPPD is not set
+# CONFIG_EXAMPLES_RFID_READUID is not set
+# CONFIG_EXAMPLES_RGBLED is not set
 # CONFIG_EXAMPLES_SENDMAIL is not set
 # CONFIG_EXAMPLES_SERIALBLASTER is not set
 # CONFIG_EXAMPLES_SERIALRX is not set
 # CONFIG_EXAMPLES_SERLOOP is not set
 # CONFIG_EXAMPLES_SLCD is not set
 # CONFIG_EXAMPLES_SMART is not set
+# CONFIG_EXAMPLES_SMP is not set
+# CONFIG_EXAMPLES_STAT is not set
 # CONFIG_EXAMPLES_TCPECHO is not set
 # CONFIG_EXAMPLES_TELNETD is not set
 # CONFIG_EXAMPLES_TIFF is not set
 # CONFIG_EXAMPLES_TOUCHSCREEN is not set
-# CONFIG_EXAMPLES_WEBSERVER is not set
-# CONFIG_EXAMPLES_USBSERIAL is not set
-# CONFIG_EXAMPLES_USBTERM is not set
 # CONFIG_EXAMPLES_WATCHDOG is not set
+# CONFIG_EXAMPLES_WEBSERVER is not set
 
 #
 # File System Utilities
 #
+# CONFIG_FSUTILS_INIFILE is not set
+
+#
+# GPS Utilities
+#
+# CONFIG_GPSUTILS_MINMEA_LIB is not set
 
 #
 # Graphics Support
@@ -545,8 +643,9 @@ CONFIG_EXAMPLES_NSH=y
 # Interpreters
 #
 # CONFIG_INTERPRETERS_FICL is not set
-# CONFIG_INTERPRETERS_PCODE is not set
 # CONFIG_INTERPRETERS_MICROPYTHON is not set
+# CONFIG_INTERPRETERS_MINIBASIC is not set
+# CONFIG_INTERPRETERS_PCODE is not set
 
 #
 # FreeModBus
@@ -557,6 +656,7 @@ CONFIG_EXAMPLES_NSH=y
 # Network Utilities
 #
 # CONFIG_NETUTILS_CODECS is not set
+# CONFIG_NETUTILS_ESP8266 is not set
 # CONFIG_NETUTILS_FTPC is not set
 # CONFIG_NETUTILS_JSON is not set
 # CONFIG_NETUTILS_SMTP is not set
@@ -565,6 +665,7 @@ CONFIG_EXAMPLES_NSH=y
 # NSH Library
 #
 CONFIG_NSH_LIBRARY=y
+# CONFIG_NSH_MOTD is not set
 
 #
 # Command Line Configuration
@@ -607,12 +708,12 @@ CONFIG_NSH_DISABLE_LOSMART=y
 # CONFIG_NSH_DISABLE_LS is not set
 # CONFIG_NSH_DISABLE_MB is not set
 # CONFIG_NSH_DISABLE_MKDIR is not set
-CONFIG_NSH_DISABLE_MKFIFO=y
 CONFIG_NSH_DISABLE_MKRD=y
 # CONFIG_NSH_DISABLE_MH is not set
 # CONFIG_NSH_DISABLE_MOUNT is not set
 # CONFIG_NSH_DISABLE_MV is not set
 # CONFIG_NSH_DISABLE_MW is not set
+CONFIG_NSH_DISABLE_PRINTF=y
 CONFIG_NSH_DISABLE_PS=y
 CONFIG_NSH_DISABLE_PUT=y
 # CONFIG_NSH_DISABLE_PWD is not set
@@ -629,6 +730,7 @@ CONFIG_NSH_DISABLE_UNAME=y
 # CONFIG_NSH_DISABLE_USLEEP is not set
 CONFIG_NSH_DISABLE_WGET=y
 CONFIG_NSH_DISABLE_XD=y
+CONFIG_NSH_MMCSDMINOR=0
 
 #
 # Configure Command Options
@@ -647,6 +749,8 @@ CONFIG_NSH_DISABLESCRIPT=y
 CONFIG_NSH_CONSOLE=y
 # CONFIG_NSH_ALTCONDEV is not set
 # CONFIG_NSH_ARCHINIT is not set
+# CONFIG_NSH_LOGIN is not set
+# CONFIG_NSH_CONSOLE_LOGIN is not set
 
 #
 # NxWidgets/NxWM
@@ -660,13 +764,12 @@ CONFIG_NSH_CONSOLE=y
 #
 # System Libraries and NSH Add-Ons
 #
-# CONFIG_SYSTEM_FREE is not set
 # CONFIG_SYSTEM_CLE is not set
 # CONFIG_SYSTEM_CUTERM is not set
-# CONFIG_SYSTEM_INSTALL is not set
-# CONFIG_LIB_HEX2BIN is not set
-# CONFIG_FSUTILS_INIFILE is not set
+# CONFIG_SYSTEM_FREE is not set
+# CONFIG_SYSTEM_HEX2BIN is not set
 # CONFIG_SYSTEM_HEXED is not set
+# CONFIG_SYSTEM_INSTALL is not set
 # CONFIG_SYSTEM_RAMTEST is not set
 CONFIG_READLINE_HAVE_EXTMATCH=y
 CONFIG_SYSTEM_READLINE=y
@@ -674,5 +777,7 @@ CONFIG_READLINE_ECHO=y
 # CONFIG_READLINE_TABCOMPLETION is not set
 # CONFIG_READLINE_CMD_HISTORY is not set
 # CONFIG_SYSTEM_SUDOKU is not set
+# CONFIG_SYSTEM_TEE is not set
+# CONFIG_SYSTEM_UBLOXMODEM is not set
 # CONFIG_SYSTEM_VI is not set
 # CONFIG_SYSTEM_ZMODEM is not set

configs/bambino-200e/netnsh/defconfig

@@ -163,6 +163,7 @@ CONFIG_ARCH_CHIP_LPC4330FBD144=y
 # CONFIG_ARCH_CHIP_LPC4330FET256 is not set
 # CONFIG_ARCH_CHIP_LPC4337JBD144 is not set
 # CONFIG_ARCH_CHIP_LPC4337JET100 is not set
+# CONFIG_ARCH_CHIP_LPC4337FET256 is not set
 # CONFIG_ARCH_CHIP_LPC4350FBD208 is not set
 # CONFIG_ARCH_CHIP_LPC4350FET180 is not set
 # CONFIG_ARCH_CHIP_LPC4350FET256 is not set
@@ -293,6 +294,7 @@ CONFIG_ARCH_STACKDUMP=y
 # CONFIG_ARCH_HAVE_RAMFUNCS is not set
 CONFIG_ARCH_HAVE_RAMVECTORS=y
 # CONFIG_ARCH_RAMVECTORS is not set
+# CONFIG_ARCH_MINIMAL_VECTORTABLE is not set
 
 #
 # Board Settings
@@ -486,10 +488,10 @@ CONFIG_DEV_NULL=y
 # CONFIG_PWM is not set
 # CONFIG_ARCH_HAVE_I2CRESET is not set
 # CONFIG_I2C is not set
-# CONFIG_SPI is not set
 # CONFIG_ARCH_HAVE_SPI_CRCGENERATION is not set
 # CONFIG_ARCH_HAVE_SPI_CS_CONTROL is not set
 # CONFIG_ARCH_HAVE_SPI_BITORDER is not set
+# CONFIG_SPI is not set
 # CONFIG_I2S is not set
 
 #
@@ -771,6 +773,7 @@ CONFIG_NET_HOSTNAME="Bambino-200E"
 # CONFIG_DISABLE_MOUNTPOINT is not set
 # CONFIG_FS_AUTOMOUNTER is not set
 # CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
+# CONFIG_PSEUDOFS_SOFTLINKS is not set
 CONFIG_FS_READABLE=y
 # CONFIG_FS_WRITABLE is not set
 # CONFIG_FS_NAMED_SEMAPHORES is not set
@@ -835,13 +838,30 @@ CONFIG_BUILTIN=y
 #
 # Standard C Library Options
 #
+
+#
+# Standard C I/O
+#
+# CONFIG_STDIO_DISABLE_BUFFERING is not set
 CONFIG_STDIO_BUFFER_SIZE=64
 CONFIG_STDIO_LINEBUFFER=y
 CONFIG_NUNGET_CHARS=2
-CONFIG_LIB_HOMEDIR="/"
-# CONFIG_LIBC_DLLFCN is not set
-# CONFIG_LIBC_MODLIB is not set
+# CONFIG_NOPRINTF_FIELDWIDTH is not set
+# CONFIG_LIBC_FLOATINGPOINT is not set
+CONFIG_LIBC_LONG_LONG=y
+# CONFIG_LIBC_SCANSET is not set
+# CONFIG_EOL_IS_CR is not set
+# CONFIG_EOL_IS_LF is not set
+# CONFIG_EOL_IS_BOTH_CRLF is not set
+CONFIG_EOL_IS_EITHER_CRLF=y
+# CONFIG_MEMCPY_VIK is not set
 CONFIG_LIBM=y
+
+#
+# Architecture-Specific Support
+#
+CONFIG_ARCH_LOWPUTC=y
+# CONFIG_ARCH_ROMGETC is not set
 # CONFIG_LIBC_ARCH_MEMCPY is not set
 # CONFIG_LIBC_ARCH_MEMCMP is not set
 # CONFIG_LIBC_ARCH_MEMMOVE is not set
@@ -854,34 +874,56 @@ CONFIG_LIBM=y
 # CONFIG_LIBC_ARCH_STRNLEN is not set
 # CONFIG_LIBC_ARCH_ELF is not set
 # CONFIG_ARMV7M_MEMCPY is not set
-# CONFIG_NOPRINTF_FIELDWIDTH is not set
-# CONFIG_LIBC_FLOATINGPOINT is not set
-CONFIG_LIBC_LONG_LONG=y
-# CONFIG_LIBC_SCANSET is not set
-# CONFIG_LIBC_IOCTL_VARIADIC is not set
-# CONFIG_LIBC_WCHAR is not set
-# CONFIG_LIBC_LOCALE is not set
+
+#
+# stdlib Options
+#
 CONFIG_LIB_RAND_ORDER=1
-# CONFIG_EOL_IS_CR is not set
-# CONFIG_EOL_IS_LF is not set
-# CONFIG_EOL_IS_BOTH_CRLF is not set
-CONFIG_EOL_IS_EITHER_CRLF=y
+CONFIG_LIB_HOMEDIR="/"
+
+#
+# Program Execution Options
+#
 # CONFIG_LIBC_EXECFUNCS is not set
 CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=1024
 CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=2048
+
+#
+# errno Decode Support
+#
 # CONFIG_LIBC_STRERROR is not set
 # CONFIG_LIBC_PERROR_STDOUT is not set
-CONFIG_ARCH_LOWPUTC=y
+
+#
+# memcpy/memset Options
+#
+# CONFIG_MEMSET_OPTSPEED is not set
+# CONFIG_LIBC_DLLFCN is not set
+# CONFIG_LIBC_MODLIB is not set
+# CONFIG_LIBC_WCHAR is not set
+# CONFIG_LIBC_LOCALE is not set
+
+#
+# Time/Time Zone Support
+#
 # CONFIG_LIBC_LOCALTIME is not set
 # CONFIG_TIME_EXTENDED is not set
-CONFIG_LIB_SENDFILE_BUFSIZE=512
-# CONFIG_ARCH_ROMGETC is not set
-# CONFIG_MEMCPY_VIK is not set
-# CONFIG_MEMSET_OPTSPEED is not set
 CONFIG_ARCH_HAVE_TLS=y
+
+#
+# Thread Local Storage (TLS)
+#
 # CONFIG_TLS is not set
+
+#
+# Network-Related Options
+#
 # CONFIG_LIBC_IPv6_ADDRCONV is not set
 CONFIG_LIBC_NETDB=y
+
+#
+# NETDB Support
+#
 # CONFIG_NETDB_HOSTFILE is not set
 CONFIG_NETDB_DNSCLIENT=y
 CONFIG_NETDB_DNSCLIENT_ENTRIES=4
@@ -891,6 +933,8 @@ CONFIG_NETDB_DNSCLIENT_MAXRESPONSE=96
 # CONFIG_NETDB_RESOLVCONF is not set
 CONFIG_NETDB_DNSSERVER_NOADDR=y
 # CONFIG_NETDB_DNSSERVER_IPv4 is not set
+# CONFIG_LIBC_IOCTL_VARIADIC is not set
+CONFIG_LIB_SENDFILE_BUFSIZE=512
 
 #
 # Non-standard Library Support
@@ -944,10 +988,10 @@ CONFIG_BUILTIN_PROXY_STACKSIZE=1024
 # CONFIG_EXAMPLES_NRF24L01TERM is not set
 CONFIG_EXAMPLES_NSH=y
 # CONFIG_EXAMPLES_NULL is not set
+# CONFIG_EXAMPLES_NX is not set
 # CONFIG_EXAMPLES_NXFFS is not set
 # CONFIG_EXAMPLES_NXHELLO is not set
 # CONFIG_EXAMPLES_NXIMAGE is not set
-# CONFIG_EXAMPLES_NX is not set
 # CONFIG_EXAMPLES_NXLINES is not set
 # CONFIG_EXAMPLES_NXTERM is not set
 # CONFIG_EXAMPLES_NXTEXT is not set
@@ -965,14 +1009,14 @@ CONFIG_EXAMPLES_NSH=y
 # CONFIG_EXAMPLES_SMART is not set
 # CONFIG_EXAMPLES_SMART_TEST is not set
 # CONFIG_EXAMPLES_SMP is not set
+# CONFIG_EXAMPLES_STAT is not set
 # CONFIG_EXAMPLES_TCPECHO is not set
 # CONFIG_EXAMPLES_TELNETD is not set
 # CONFIG_EXAMPLES_TIFF is not set
 # CONFIG_EXAMPLES_TOUCHSCREEN is not set
-# CONFIG_EXAMPLES_UDPBLASTER is not set
 # CONFIG_EXAMPLES_UDP is not set
+# CONFIG_EXAMPLES_UDPBLASTER is not set
 # CONFIG_EXAMPLES_USBSERIAL is not set
-# CONFIG_EXAMPLES_USBTERM is not set
 # CONFIG_EXAMPLES_WATCHDOG is not set
 # CONFIG_EXAMPLES_WEBSERVER is not set
 # CONFIG_EXAMPLES_XMLRPC is not set

configs/bambino-200e/nsh/defconfig

@@ -60,10 +60,12 @@ CONFIG_ARCH_ARM=y
 # CONFIG_ARCH_AVR is not set
 # CONFIG_ARCH_HC is not set
 # CONFIG_ARCH_MIPS is not set
+# CONFIG_ARCH_MISOC is not set
 # CONFIG_ARCH_RENESAS is not set
 # CONFIG_ARCH_RISCV is not set
 # CONFIG_ARCH_SIM is not set
 # CONFIG_ARCH_X86 is not set
+# CONFIG_ARCH_XTENSA is not set
 # CONFIG_ARCH_Z16 is not set
 # CONFIG_ARCH_Z80 is not set
 CONFIG_ARCH="arm"
@@ -103,7 +105,9 @@ CONFIG_ARCH_CHIP_LPC43XX=y
 # CONFIG_ARCH_ARM926EJS is not set
 # CONFIG_ARCH_ARM920T is not set
 # CONFIG_ARCH_CORTEXM0 is not set
+# CONFIG_ARCH_CORTEXM23 is not set
 # CONFIG_ARCH_CORTEXM3 is not set
+# CONFIG_ARCH_CORTEXM33 is not set
 CONFIG_ARCH_CORTEXM4=y
 # CONFIG_ARCH_CORTEXM7 is not set
 # CONFIG_ARCH_CORTEXA5 is not set
@@ -159,6 +163,7 @@ CONFIG_ARCH_CHIP_LPC4330FBD144=y
 # CONFIG_ARCH_CHIP_LPC4330FET256 is not set
 # CONFIG_ARCH_CHIP_LPC4337JBD144 is not set
 # CONFIG_ARCH_CHIP_LPC4337JET100 is not set
+# CONFIG_ARCH_CHIP_LPC4337FET256 is not set
 # CONFIG_ARCH_CHIP_LPC4350FBD208 is not set
 # CONFIG_ARCH_CHIP_LPC4350FET180 is not set
 # CONFIG_ARCH_CHIP_LPC4350FET256 is not set
@@ -238,7 +243,8 @@ CONFIG_ARCH_HAVE_AHB_SRAM_BANK1=y
 #
 # RS-485 Configuration
 #
-# CONFIG_USART2_RS485MODE is not set
+# CONFIG_UART1_RS485MODE is not set
+# CONFIG_UART1_RS485_DTRDIR is not set
 
 #
 # USB device controller driver (DCD) options
@@ -272,6 +278,7 @@ CONFIG_ARCH_STACKDUMP=y
 # CONFIG_ARCH_HAVE_RAMFUNCS is not set
 CONFIG_ARCH_HAVE_RAMVECTORS=y
 # CONFIG_ARCH_RAMVECTORS is not set
+# CONFIG_ARCH_MINIMAL_VECTORTABLE is not set
 
 #
 # Board Settings
@@ -363,6 +370,7 @@ CONFIG_PREALLOC_TIMERS=4
 #
 # Tasks and Scheduling
 #
+# CONFIG_SPINLOCK is not set
 # CONFIG_INIT_NONE is not set
 CONFIG_INIT_ENTRYPOINT=y
 # CONFIG_INIT_FILEPATH is not set
@@ -379,6 +387,8 @@ CONFIG_SCHED_WAITPID=y
 #
 # CONFIG_MUTEX_TYPES is not set
 CONFIG_NPTHREAD_KEYS=4
+# CONFIG_PTHREAD_CLEANUP is not set
+# CONFIG_CANCELLATION_POINTS is not set
 
 #
 # Performance Monitoring
@@ -458,6 +468,9 @@ CONFIG_DEV_NULL=y
 # CONFIG_PWM is not set
 # CONFIG_ARCH_HAVE_I2CRESET is not set
 # CONFIG_I2C is not set
+# CONFIG_ARCH_HAVE_SPI_CRCGENERATION is not set
+# CONFIG_ARCH_HAVE_SPI_CS_CONTROL is not set
+# CONFIG_ARCH_HAVE_SPI_BITORDER is not set
 # CONFIG_SPI is not set
 # CONFIG_I2S is not set
 
@@ -534,10 +547,8 @@ CONFIG_SERIAL_NPOLLWAITERS=2
 # CONFIG_SERIAL_IFLOWCONTROL is not set
 # CONFIG_SERIAL_OFLOWCONTROL is not set
 # CONFIG_SERIAL_DMA is not set
-# CONFIG_SERIAL_TIOCSERGSTRUCT is not set
 CONFIG_ARCH_HAVE_SERIAL_TERMIOS=y
 CONFIG_UART1_SERIAL_CONSOLE=y
-# CONFIG_USART2_SERIAL_CONSOLE is not set
 # CONFIG_OTHER_SERIAL_CONSOLE is not set
 # CONFIG_NO_SERIAL_CONSOLE is not set
 
@@ -636,6 +647,7 @@ CONFIG_SYSLOG_CONSOLE=y
 # CONFIG_DISABLE_MOUNTPOINT is not set
 # CONFIG_FS_AUTOMOUNTER is not set
 # CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
+# CONFIG_PSEUDOFS_SOFTLINKS is not set
 CONFIG_FS_READABLE=y
 CONFIG_FS_WRITABLE=y
 # CONFIG_FS_NAMED_SEMAPHORES is not set
@@ -653,6 +665,7 @@ CONFIG_FAT_MAXFNAME=32
 # CONFIG_FS_ROMFS is not set
 # CONFIG_FS_TMPFS is not set
 # CONFIG_FS_SMARTFS is not set
+# CONFIG_FS_BINFS is not set
 # CONFIG_FS_PROCFS is not set
 # CONFIG_FS_UNIONFS is not set
 
@@ -696,38 +709,98 @@ CONFIG_SYMTAB_ORDEREDBYNAME=y
 #
 # Standard C Library Options
 #
+
+#
+# Standard C I/O
+#
+# CONFIG_STDIO_DISABLE_BUFFERING is not set
 CONFIG_STDIO_BUFFER_SIZE=64
 CONFIG_STDIO_LINEBUFFER=y
 CONFIG_NUNGET_CHARS=2
-CONFIG_LIB_HOMEDIR="/"
-# CONFIG_LIBM is not set
 # CONFIG_NOPRINTF_FIELDWIDTH is not set
 # CONFIG_LIBC_FLOATINGPOINT is not set
 CONFIG_LIBC_LONG_LONG=y
-# CONFIG_LIBC_IOCTL_VARIADIC is not set
-# CONFIG_LIBC_WCHAR is not set
-# CONFIG_LIBC_LOCALE is not set
-CONFIG_LIB_RAND_ORDER=1
+# CONFIG_LIBC_SCANSET is not set
 # CONFIG_EOL_IS_CR is not set
 # CONFIG_EOL_IS_LF is not set
 # CONFIG_EOL_IS_BOTH_CRLF is not set
 CONFIG_EOL_IS_EITHER_CRLF=y
+# CONFIG_MEMCPY_VIK is not set
+# CONFIG_LIBM is not set
+
+#
+# Architecture-Specific Support
+#
+CONFIG_ARCH_LOWPUTC=y
+# CONFIG_ARCH_ROMGETC is not set
+# CONFIG_LIBC_ARCH_MEMCPY is not set
+# CONFIG_LIBC_ARCH_MEMCMP is not set
+# CONFIG_LIBC_ARCH_MEMMOVE is not set
+# CONFIG_LIBC_ARCH_MEMSET is not set
+# CONFIG_LIBC_ARCH_STRCHR is not set
+# CONFIG_LIBC_ARCH_STRCMP is not set
+# CONFIG_LIBC_ARCH_STRCPY is not set
+# CONFIG_LIBC_ARCH_STRNCPY is not set
+# CONFIG_LIBC_ARCH_STRLEN is not set
+# CONFIG_LIBC_ARCH_STRNLEN is not set
+# CONFIG_LIBC_ARCH_ELF is not set
+# CONFIG_ARMV7M_MEMCPY is not set
+
+#
+# stdlib Options
+#
+CONFIG_LIB_RAND_ORDER=1
+CONFIG_LIB_HOMEDIR="/"
+CONFIG_LIBC_TMPDIR="/tmp"
+CONFIG_LIBC_MAX_TMPFILE=32
+
+#
+# Program Execution Options
+#
 # CONFIG_LIBC_EXECFUNCS is not set
 CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=1024
 CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=2048
+
+#
+# errno Decode Support
+#
 # CONFIG_LIBC_STRERROR is not set
 # CONFIG_LIBC_PERROR_STDOUT is not set
-CONFIG_LIBC_TMPDIR="/tmp"
-CONFIG_LIBC_MAX_TMPFILE=32
-CONFIG_ARCH_LOWPUTC=y
+
+#
+# memcpy/memset Options
+#
+# CONFIG_MEMSET_OPTSPEED is not set
+# CONFIG_LIBC_DLLFCN is not set
+# CONFIG_LIBC_MODLIB is not set
+# CONFIG_LIBC_WCHAR is not set
+# CONFIG_LIBC_LOCALE is not set
+
+#
+# Time/Time Zone Support
+#
 # CONFIG_LIBC_LOCALTIME is not set
 # CONFIG_TIME_EXTENDED is not set
-CONFIG_LIB_SENDFILE_BUFSIZE=512
-# CONFIG_ARCH_ROMGETC is not set
 CONFIG_ARCH_HAVE_TLS=y
+
+#
+# Thread Local Storage (TLS)
+#
 # CONFIG_TLS is not set
+
+#
+# Network-Related Options
+#
+# CONFIG_LIBC_IPv4_ADDRCONV is not set
+# CONFIG_LIBC_IPv6_ADDRCONV is not set
 # CONFIG_LIBC_NETDB is not set
+
+#
+# NETDB Support
+#
 # CONFIG_NETDB_HOSTFILE is not set
+# CONFIG_LIBC_IOCTL_VARIADIC is not set
+CONFIG_LIB_SENDFILE_BUFSIZE=512
 
 #
 # Non-standard Library Support
@@ -780,10 +853,10 @@ CONFIG_BUILTIN_PROXY_STACKSIZE=1024
 # CONFIG_EXAMPLES_NRF24L01TERM is not set
 CONFIG_EXAMPLES_NSH=y
 # CONFIG_EXAMPLES_NULL is not set
+# CONFIG_EXAMPLES_NX is not set
 # CONFIG_EXAMPLES_NXFFS is not set
 # CONFIG_EXAMPLES_NXHELLO is not set
 # CONFIG_EXAMPLES_NXIMAGE is not set
-# CONFIG_EXAMPLES_NX is not set
 # CONFIG_EXAMPLES_NXLINES is not set
 # CONFIG_EXAMPLES_NXTERM is not set
 # CONFIG_EXAMPLES_NXTEXT is not set
@@ -801,6 +874,7 @@ CONFIG_EXAMPLES_NSH=y
 # CONFIG_EXAMPLES_SMART is not set
 # CONFIG_EXAMPLES_SMART_TEST is not set
 # CONFIG_EXAMPLES_SMP is not set
+# CONFIG_EXAMPLES_STAT is not set
 # CONFIG_EXAMPLES_TCPECHO is not set
 # CONFIG_EXAMPLES_TELNETD is not set
 # CONFIG_EXAMPLES_TIFF is not set
@@ -809,12 +883,12 @@ CONFIG_EXAMPLE_TIMER_DEVNAME="/dev/timer0"
 CONFIG_EXAMPLE_TIMER_INTERVAL=1000000
 CONFIG_EXAMPLE_TIMER_DELAY=100000
 CONFIG_EXAMPLE_TIMER_NSAMPLES=20
+CONFIG_EXAMPLE_TIMER_SIGNO=17
 CONFIG_EXAMPLES_TIMER_APPNAME="timer"
 CONFIG_EXAMPLES_TIMER_STACKSIZE=2048
 CONFIG_EXAMPLES_TIMER_PRIORITY=100
 # CONFIG_EXAMPLES_TOUCHSCREEN is not set
 # CONFIG_EXAMPLES_USBSERIAL is not set
-# CONFIG_EXAMPLES_USBTERM is not set
 # CONFIG_EXAMPLES_WATCHDOG is not set
 # CONFIG_EXAMPLES_WEBSERVER is not set
 
@@ -937,6 +1011,7 @@ CONFIG_NSH_MMCSDMINOR=0
 # Configure Command Options
 #
 CONFIG_NSH_CMDOPT_DF_H=y
+# CONFIG_NSH_CMDOPT_DD_STATS is not set
 CONFIG_NSH_CODECS_BUFSIZE=128
 CONFIG_NSH_CMDOPT_HEXDUMP=y
 CONFIG_NSH_FILEIOSIZE=512

configs/bambino-200e/usbnsh/defconfig

@@ -16,7 +16,7 @@ CONFIG_HOST_LINUX=y
 #
 # Build Configuration
 #
-CONFIG_APPS_DIR="../apps"
+# CONFIG_APPS_DIR="../apps"
 CONFIG_BUILD_FLAT=y
 # CONFIG_BUILD_2PASS is not set
 
@@ -163,6 +163,7 @@ CONFIG_ARCH_CHIP_LPC4330FBD144=y
 # CONFIG_ARCH_CHIP_LPC4330FET256 is not set
 # CONFIG_ARCH_CHIP_LPC4337JBD144 is not set
 # CONFIG_ARCH_CHIP_LPC4337JET100 is not set
+# CONFIG_ARCH_CHIP_LPC4337FET256 is not set
 # CONFIG_ARCH_CHIP_LPC4350FBD208 is not set
 # CONFIG_ARCH_CHIP_LPC4350FET180 is not set
 # CONFIG_ARCH_CHIP_LPC4350FET256 is not set
@@ -277,6 +278,7 @@ CONFIG_ARCH_STACKDUMP=y
 # CONFIG_ARCH_HAVE_RAMFUNCS is not set
 CONFIG_ARCH_HAVE_RAMVECTORS=y
 # CONFIG_ARCH_RAMVECTORS is not set
+# CONFIG_ARCH_MINIMAL_VECTORTABLE is not set
 
 #
 # Board Settings
@@ -466,10 +468,10 @@ CONFIG_DEV_NULL=y
 # CONFIG_PWM is not set
 # CONFIG_ARCH_HAVE_I2CRESET is not set
 # CONFIG_I2C is not set
-# CONFIG_SPI is not set
 # CONFIG_ARCH_HAVE_SPI_CRCGENERATION is not set
 # CONFIG_ARCH_HAVE_SPI_CS_CONTROL is not set
 # CONFIG_ARCH_HAVE_SPI_BITORDER is not set
+# CONFIG_SPI is not set
 # CONFIG_I2S is not set
 
 #
@@ -708,14 +710,30 @@ CONFIG_BUILTIN=y
 #
 # Standard C Library Options
 #
+
+#
+# Standard C I/O
+#
 # CONFIG_STDIO_DISABLE_BUFFERING is not set
 CONFIG_STDIO_BUFFER_SIZE=64
 CONFIG_STDIO_LINEBUFFER=y
 CONFIG_NUNGET_CHARS=2
-CONFIG_LIB_HOMEDIR="/"
-# CONFIG_LIBC_DLLFCN is not set
-# CONFIG_LIBC_MODLIB is not set
+# CONFIG_NOPRINTF_FIELDWIDTH is not set
+# CONFIG_LIBC_FLOATINGPOINT is not set
+CONFIG_LIBC_LONG_LONG=y
+# CONFIG_LIBC_SCANSET is not set
+# CONFIG_EOL_IS_CR is not set
+# CONFIG_EOL_IS_LF is not set
+# CONFIG_EOL_IS_BOTH_CRLF is not set
+CONFIG_EOL_IS_EITHER_CRLF=y
+# CONFIG_MEMCPY_VIK is not set
 # CONFIG_LIBM is not set
+
+#
+# Architecture-Specific Support
+#
+CONFIG_ARCH_LOWPUTC=y
+# CONFIG_ARCH_ROMGETC is not set
 # CONFIG_LIBC_ARCH_MEMCPY is not set
 # CONFIG_LIBC_ARCH_MEMCMP is not set
 # CONFIG_LIBC_ARCH_MEMMOVE is not set
@@ -728,36 +746,60 @@ CONFIG_LIB_HOMEDIR="/"
 # CONFIG_LIBC_ARCH_STRNLEN is not set
 # CONFIG_LIBC_ARCH_ELF is not set
 # CONFIG_ARMV7M_MEMCPY is not set
-# CONFIG_NOPRINTF_FIELDWIDTH is not set
-# CONFIG_LIBC_FLOATINGPOINT is not set
-CONFIG_LIBC_LONG_LONG=y
-# CONFIG_LIBC_SCANSET is not set
-# CONFIG_LIBC_IOCTL_VARIADIC is not set
-# CONFIG_LIBC_WCHAR is not set
-# CONFIG_LIBC_LOCALE is not set
+
+#
+# stdlib Options
+#
 CONFIG_LIB_RAND_ORDER=1
-# CONFIG_EOL_IS_CR is not set
-# CONFIG_EOL_IS_LF is not set
-# CONFIG_EOL_IS_BOTH_CRLF is not set
-CONFIG_EOL_IS_EITHER_CRLF=y
+CONFIG_LIB_HOMEDIR="/"
+
+#
+# Program Execution Options
+#
 # CONFIG_LIBC_EXECFUNCS is not set
 CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=1024
 CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=2048
+
+#
+# errno Decode Support
+#
 # CONFIG_LIBC_STRERROR is not set
 # CONFIG_LIBC_PERROR_STDOUT is not set
-CONFIG_ARCH_LOWPUTC=y
+
+#
+# memcpy/memset Options
+#
+# CONFIG_MEMSET_OPTSPEED is not set
+# CONFIG_LIBC_DLLFCN is not set
+# CONFIG_LIBC_MODLIB is not set
+# CONFIG_LIBC_WCHAR is not set
+# CONFIG_LIBC_LOCALE is not set
+
+#
+# Time/Time Zone Support
+#
 # CONFIG_LIBC_LOCALTIME is not set
 # CONFIG_TIME_EXTENDED is not set
-CONFIG_LIB_SENDFILE_BUFSIZE=512
-# CONFIG_ARCH_ROMGETC is not set
-# CONFIG_MEMCPY_VIK is not set
-# CONFIG_MEMSET_OPTSPEED is not set
 CONFIG_ARCH_HAVE_TLS=y
+
+#
+# Thread Local Storage (TLS)
+#
 # CONFIG_TLS is not set
+
+#
+# Network-Related Options
+#
 # CONFIG_LIBC_IPv4_ADDRCONV is not set
 # CONFIG_LIBC_IPv6_ADDRCONV is not set
 # CONFIG_LIBC_NETDB is not set
+
+#
+# NETDB Support
+#
 # CONFIG_NETDB_HOSTFILE is not set
+# CONFIG_LIBC_IOCTL_VARIADIC is not set
+CONFIG_LIB_SENDFILE_BUFSIZE=512
 
 #
 # Non-standard Library Support
@@ -809,10 +851,10 @@ CONFIG_BUILTIN_PROXY_STACKSIZE=1024
 # CONFIG_EXAMPLES_NRF24L01TERM is not set
 CONFIG_EXAMPLES_NSH=y
 # CONFIG_EXAMPLES_NULL is not set
+# CONFIG_EXAMPLES_NX is not set
 # CONFIG_EXAMPLES_NXFFS is not set
 # CONFIG_EXAMPLES_NXHELLO is not set
 # CONFIG_EXAMPLES_NXIMAGE is not set
-# CONFIG_EXAMPLES_NX is not set
 # CONFIG_EXAMPLES_NXLINES is not set
 # CONFIG_EXAMPLES_NXTERM is not set
 # CONFIG_EXAMPLES_NXTEXT is not set
@@ -830,12 +872,12 @@ CONFIG_EXAMPLES_NSH=y
 # CONFIG_EXAMPLES_SMART is not set
 # CONFIG_EXAMPLES_SMART_TEST is not set
 # CONFIG_EXAMPLES_SMP is not set
+# CONFIG_EXAMPLES_STAT is not set
 # CONFIG_EXAMPLES_TCPECHO is not set
 # CONFIG_EXAMPLES_TELNETD is not set
 # CONFIG_EXAMPLES_TIFF is not set
 # CONFIG_EXAMPLES_TOUCHSCREEN is not set
 # CONFIG_EXAMPLES_USBSERIAL is not set
-# CONFIG_EXAMPLES_USBTERM is not set
 # CONFIG_EXAMPLES_WATCHDOG is not set
 # CONFIG_EXAMPLES_WEBSERVER is not set
 

configs/c5471evm/httpd/defconfig

@@ -105,7 +105,9 @@ CONFIG_ARCH_ARM7TDMI=y
 # CONFIG_ARCH_ARM926EJS is not set
 # CONFIG_ARCH_ARM920T is not set
 # CONFIG_ARCH_CORTEXM0 is not set
+# CONFIG_ARCH_CORTEXM23 is not set
 # CONFIG_ARCH_CORTEXM3 is not set
+# CONFIG_ARCH_CORTEXM33 is not set
 # CONFIG_ARCH_CORTEXM4 is not set
 # CONFIG_ARCH_CORTEXM7 is not set
 # CONFIG_ARCH_CORTEXA5 is not set
@@ -192,6 +194,7 @@ CONFIG_ARCH_STACKDUMP=y
 # CONFIG_ARCH_IDLE_CUSTOM is not set
 # CONFIG_ARCH_HAVE_RAMFUNCS is not set
 # CONFIG_ARCH_HAVE_RAMVECTORS is not set
+# CONFIG_ARCH_MINIMAL_VECTORTABLE is not set
 
 #
 # Board Settings
@@ -270,6 +273,7 @@ CONFIG_PREALLOC_TIMERS=8
 #
 # Tasks and Scheduling
 #
+# CONFIG_SPINLOCK is not set
 # CONFIG_INIT_NONE is not set
 CONFIG_INIT_ENTRYPOINT=y
 # CONFIG_INIT_FILEPATH is not set
@@ -286,6 +290,8 @@ CONFIG_MAX_TASKS=64
 #
 # CONFIG_MUTEX_TYPES is not set
 CONFIG_NPTHREAD_KEYS=4
+# CONFIG_PTHREAD_CLEANUP is not set
+# CONFIG_CANCELLATION_POINTS is not set
 
 #
 # Performance Monitoring
@@ -364,10 +370,10 @@ CONFIG_DEV_NULL=y
 # CONFIG_PWM is not set
 # CONFIG_ARCH_HAVE_I2CRESET is not set
 # CONFIG_I2C is not set
-# CONFIG_SPI is not set
 # CONFIG_ARCH_HAVE_SPI_CRCGENERATION is not set
 # CONFIG_ARCH_HAVE_SPI_CS_CONTROL is not set
 # CONFIG_ARCH_HAVE_SPI_BITORDER is not set
+# CONFIG_SPI is not set
 # CONFIG_I2S is not set
 
 #
@@ -591,6 +597,7 @@ CONFIG_NET_HOSTNAME=""
 #
 CONFIG_DISABLE_MOUNTPOINT=y
 # CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
+# CONFIG_PSEUDOFS_SOFTLINKS is not set
 # CONFIG_FS_READABLE is not set
 # CONFIG_FS_WRITABLE is not set
 # CONFIG_FS_NAMED_SEMAPHORES is not set
@@ -637,34 +644,92 @@ CONFIG_MM_REGIONS=1
 #
 # Standard C Library Options
 #
+
+#
+# Standard C I/O
+#
+# CONFIG_STDIO_DISABLE_BUFFERING is not set
 CONFIG_STDIO_BUFFER_SIZE=64
 CONFIG_STDIO_LINEBUFFER=y
 CONFIG_NUNGET_CHARS=2
-# CONFIG_LIBM is not set
 # CONFIG_NOPRINTF_FIELDWIDTH is not set
 # CONFIG_LIBC_FLOATINGPOINT is not set
 CONFIG_LIBC_LONG_LONG=y
-# CONFIG_LIBC_IOCTL_VARIADIC is not set
-# CONFIG_LIBC_WCHAR is not set
-# CONFIG_LIBC_LOCALE is not set
-CONFIG_LIB_RAND_ORDER=1
+# CONFIG_LIBC_SCANSET is not set
 # CONFIG_EOL_IS_CR is not set
 # CONFIG_EOL_IS_LF is not set
 # CONFIG_EOL_IS_BOTH_CRLF is not set
 CONFIG_EOL_IS_EITHER_CRLF=y
+# CONFIG_MEMCPY_VIK is not set
+# CONFIG_LIBM is not set
+
+#
+# Architecture-Specific Support
+#
+CONFIG_ARCH_LOWPUTC=y
+# CONFIG_ARCH_ROMGETC is not set
+# CONFIG_LIBC_ARCH_MEMCPY is not set
+# CONFIG_LIBC_ARCH_MEMCMP is not set
+# CONFIG_LIBC_ARCH_MEMMOVE is not set
+# CONFIG_LIBC_ARCH_MEMSET is not set
+# CONFIG_LIBC_ARCH_STRCHR is not set
+# CONFIG_LIBC_ARCH_STRCMP is not set
+# CONFIG_LIBC_ARCH_STRCPY is not set
+# CONFIG_LIBC_ARCH_STRNCPY is not set
+# CONFIG_LIBC_ARCH_STRLEN is not set
+# CONFIG_LIBC_ARCH_STRNLEN is not set
+# CONFIG_LIBC_ARCH_ELF is not set
+
+#
+# stdlib Options
+#
+CONFIG_LIB_RAND_ORDER=1
+
+#
+# Program Execution Options
+#
 # CONFIG_LIBC_EXECFUNCS is not set
 CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=1024
 CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=2048
+
+#
+# errno Decode Support
+#
 # CONFIG_LIBC_STRERROR is not set
 # CONFIG_LIBC_PERROR_STDOUT is not set
-CONFIG_ARCH_LOWPUTC=y
+
+#
+# memcpy/memset Options
+#
+# CONFIG_MEMSET_OPTSPEED is not set
+# CONFIG_LIBC_DLLFCN is not set
+# CONFIG_LIBC_MODLIB is not set
+# CONFIG_LIBC_WCHAR is not set
+# CONFIG_LIBC_LOCALE is not set
+
+#
+# Time/Time Zone Support
+#
 # CONFIG_TIME_EXTENDED is not set
-CONFIG_LIB_SENDFILE_BUFSIZE=512
-# CONFIG_ARCH_ROMGETC is not set
 CONFIG_ARCH_HAVE_TLS=y
+
+#
+# Thread Local Storage (TLS)
+#
 # CONFIG_TLS is not set
+
+#
+# Network-Related Options
+#
+# CONFIG_LIBC_IPv6_ADDRCONV is not set
 # CONFIG_LIBC_NETDB is not set
 
+#
+# NETDB Support
+#
+# CONFIG_LIBC_IOCTL_VARIADIC is not set
+CONFIG_LIB_SENDFILE_BUFSIZE=512
+
 #
 # Non-standard Library Support
 #
@@ -730,11 +795,11 @@ CONFIG_ARCH_HAVE_TLS=y
 # CONFIG_EXAMPLES_SLCD is not set
 # CONFIG_EXAMPLES_SMART is not set
 # CONFIG_EXAMPLES_SMP is not set
+# CONFIG_EXAMPLES_STAT is not set
 # CONFIG_EXAMPLES_TCPECHO is not set
 # CONFIG_EXAMPLES_TELNETD is not set
 # CONFIG_EXAMPLES_TIFF is not set
 # CONFIG_EXAMPLES_TOUCHSCREEN is not set
-# CONFIG_EXAMPLES_USBTERM is not set
 # CONFIG_EXAMPLES_WATCHDOG is not set
 CONFIG_EXAMPLES_WEBSERVER=y
 CONFIG_EXAMPLES_WEBSERVER_IPADDR=0x0a000002

configs/c5471evm/nettest/defconfig

@@ -105,7 +105,9 @@ CONFIG_ARCH_ARM7TDMI=y
 # CONFIG_ARCH_ARM926EJS is not set
 # CONFIG_ARCH_ARM920T is not set
 # CONFIG_ARCH_CORTEXM0 is not set
+# CONFIG_ARCH_CORTEXM23 is not set
 # CONFIG_ARCH_CORTEXM3 is not set
+# CONFIG_ARCH_CORTEXM33 is not set
 # CONFIG_ARCH_CORTEXM4 is not set
 # CONFIG_ARCH_CORTEXM7 is not set
 # CONFIG_ARCH_CORTEXA5 is not set
@@ -192,6 +194,7 @@ CONFIG_ARCH_STACKDUMP=y
 # CONFIG_ARCH_IDLE_CUSTOM is not set
 # CONFIG_ARCH_HAVE_RAMFUNCS is not set
 # CONFIG_ARCH_HAVE_RAMVECTORS is not set
+# CONFIG_ARCH_MINIMAL_VECTORTABLE is not set
 
 #
 # Board Settings
@@ -270,6 +273,7 @@ CONFIG_PREALLOC_TIMERS=8
 #
 # Tasks and Scheduling
 #
+# CONFIG_SPINLOCK is not set
 # CONFIG_INIT_NONE is not set
 CONFIG_INIT_ENTRYPOINT=y
 # CONFIG_INIT_FILEPATH is not set
@@ -280,6 +284,7 @@ CONFIG_TASK_NAME_SIZE=0
 CONFIG_MAX_TASKS=64
 # CONFIG_SCHED_HAVE_PARENT is not set
 # CONFIG_SCHED_WAITPID is not set
+# CONFIG_CANCELLATION_POINTS is not set
 
 #
 # Performance Monitoring
@@ -357,10 +362,10 @@ CONFIG_DEV_NULL=y
 # CONFIG_PWM is not set
 # CONFIG_ARCH_HAVE_I2CRESET is not set
 # CONFIG_I2C is not set
-# CONFIG_SPI is not set
 # CONFIG_ARCH_HAVE_SPI_CRCGENERATION is not set
 # CONFIG_ARCH_HAVE_SPI_CS_CONTROL is not set
 # CONFIG_ARCH_HAVE_SPI_BITORDER is not set
+# CONFIG_SPI is not set
 # CONFIG_I2S is not set
 
 #
@@ -584,6 +589,7 @@ CONFIG_NET_HOSTNAME=""
 #
 CONFIG_DISABLE_MOUNTPOINT=y
 # CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
+# CONFIG_PSEUDOFS_SOFTLINKS is not set
 # CONFIG_FS_READABLE is not set
 # CONFIG_FS_WRITABLE is not set
 # CONFIG_FS_NAMED_SEMAPHORES is not set
@@ -630,34 +636,92 @@ CONFIG_MM_REGIONS=1
 #
 # Standard C Library Options
 #
+
+#
+# Standard C I/O
+#
+# CONFIG_STDIO_DISABLE_BUFFERING is not set
 CONFIG_STDIO_BUFFER_SIZE=64
 CONFIG_STDIO_LINEBUFFER=y
 CONFIG_NUNGET_CHARS=2
-# CONFIG_LIBM is not set
 # CONFIG_NOPRINTF_FIELDWIDTH is not set
 # CONFIG_LIBC_FLOATINGPOINT is not set
 CONFIG_LIBC_LONG_LONG=y
-# CONFIG_LIBC_IOCTL_VARIADIC is not set
-# CONFIG_LIBC_WCHAR is not set
-# CONFIG_LIBC_LOCALE is not set
-CONFIG_LIB_RAND_ORDER=1
+# CONFIG_LIBC_SCANSET is not set
 # CONFIG_EOL_IS_CR is not set
 # CONFIG_EOL_IS_LF is not set
 # CONFIG_EOL_IS_BOTH_CRLF is not set
 CONFIG_EOL_IS_EITHER_CRLF=y
+# CONFIG_MEMCPY_VIK is not set
+# CONFIG_LIBM is not set
+
+#
+# Architecture-Specific Support
+#
+CONFIG_ARCH_LOWPUTC=y
+# CONFIG_ARCH_ROMGETC is not set
+# CONFIG_LIBC_ARCH_MEMCPY is not set
+# CONFIG_LIBC_ARCH_MEMCMP is not set
+# CONFIG_LIBC_ARCH_MEMMOVE is not set
+# CONFIG_LIBC_ARCH_MEMSET is not set
+# CONFIG_LIBC_ARCH_STRCHR is not set
+# CONFIG_LIBC_ARCH_STRCMP is not set
+# CONFIG_LIBC_ARCH_STRCPY is not set
+# CONFIG_LIBC_ARCH_STRNCPY is not set
+# CONFIG_LIBC_ARCH_STRLEN is not set
+# CONFIG_LIBC_ARCH_STRNLEN is not set
+# CONFIG_LIBC_ARCH_ELF is not set
+
+#
+# stdlib Options
+#
+CONFIG_LIB_RAND_ORDER=1
+
+#
+# Program Execution Options
+#
 # CONFIG_LIBC_EXECFUNCS is not set
 CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=1024
 CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=2048
+
+#
+# errno Decode Support
+#
 # CONFIG_LIBC_STRERROR is not set
 # CONFIG_LIBC_PERROR_STDOUT is not set
-CONFIG_ARCH_LOWPUTC=y
+
+#
+# memcpy/memset Options
+#
+# CONFIG_MEMSET_OPTSPEED is not set
+# CONFIG_LIBC_DLLFCN is not set
+# CONFIG_LIBC_MODLIB is not set
+# CONFIG_LIBC_WCHAR is not set
+# CONFIG_LIBC_LOCALE is not set
+
+#
+# Time/Time Zone Support
+#
 # CONFIG_TIME_EXTENDED is not set
-CONFIG_LIB_SENDFILE_BUFSIZE=512
-# CONFIG_ARCH_ROMGETC is not set
 CONFIG_ARCH_HAVE_TLS=y
+
+#
+# Thread Local Storage (TLS)
+#
 # CONFIG_TLS is not set
+
+#
+# Network-Related Options
+#
+# CONFIG_LIBC_IPv6_ADDRCONV is not set
 # CONFIG_LIBC_NETDB is not set
 
+#
+# NETDB Support
+#
+# CONFIG_LIBC_IOCTL_VARIADIC is not set
+CONFIG_LIB_SENDFILE_BUFSIZE=512
+
 #
 # Non-standard Library Support
 #
@@ -736,11 +800,11 @@ CONFIG_EXAMPLES_NETTEST_CLIENTIP=0x0a000001
 # CONFIG_EXAMPLES_SLCD is not set
 # CONFIG_EXAMPLES_SMART is not set
 # CONFIG_EXAMPLES_SMP is not set
+# CONFIG_EXAMPLES_STAT is not set
 # CONFIG_EXAMPLES_TCPECHO is not set
 # CONFIG_EXAMPLES_TELNETD is not set
 # CONFIG_EXAMPLES_TIFF is not set
 # CONFIG_EXAMPLES_TOUCHSCREEN is not set
-# CONFIG_EXAMPLES_USBTERM is not set
 # CONFIG_EXAMPLES_WATCHDOG is not set
 # CONFIG_EXAMPLES_WEBSERVER is not set
 # CONFIG_EXAMPLES_WGET is not set

configs/c5471evm/nsh/defconfig

@@ -105,7 +105,9 @@ CONFIG_ARCH_ARM7TDMI=y
 # CONFIG_ARCH_ARM926EJS is not set
 # CONFIG_ARCH_ARM920T is not set
 # CONFIG_ARCH_CORTEXM0 is not set
+# CONFIG_ARCH_CORTEXM23 is not set
 # CONFIG_ARCH_CORTEXM3 is not set
+# CONFIG_ARCH_CORTEXM33 is not set
 # CONFIG_ARCH_CORTEXM4 is not set
 # CONFIG_ARCH_CORTEXM7 is not set
 # CONFIG_ARCH_CORTEXA5 is not set
@@ -192,6 +194,7 @@ CONFIG_ARCH_STACKDUMP=y
 # CONFIG_ARCH_IDLE_CUSTOM is not set
 # CONFIG_ARCH_HAVE_RAMFUNCS is not set
 # CONFIG_ARCH_HAVE_RAMVECTORS is not set
+# CONFIG_ARCH_MINIMAL_VECTORTABLE is not set
 
 #
 # Board Settings
@@ -270,6 +273,7 @@ CONFIG_PREALLOC_TIMERS=8
 #
 # Tasks and Scheduling
 #
+# CONFIG_SPINLOCK is not set
 # CONFIG_INIT_NONE is not set
 CONFIG_INIT_ENTRYPOINT=y
 # CONFIG_INIT_FILEPATH is not set
@@ -286,6 +290,8 @@ CONFIG_MAX_TASKS=16
 #
 # CONFIG_MUTEX_TYPES is not set
 CONFIG_NPTHREAD_KEYS=4
+# CONFIG_PTHREAD_CLEANUP is not set
+# CONFIG_CANCELLATION_POINTS is not set
 
 #
 # Performance Monitoring
@@ -364,10 +370,10 @@ CONFIG_DEV_NULL=y
 # CONFIG_PWM is not set
 # CONFIG_ARCH_HAVE_I2CRESET is not set
 # CONFIG_I2C is not set
-# CONFIG_SPI is not set
 # CONFIG_ARCH_HAVE_SPI_CRCGENERATION is not set
 # CONFIG_ARCH_HAVE_SPI_CS_CONTROL is not set
 # CONFIG_ARCH_HAVE_SPI_BITORDER is not set
+# CONFIG_SPI is not set
 # CONFIG_I2S is not set
 
 #
@@ -597,6 +603,7 @@ CONFIG_NET_HOSTNAME=""
 #
 CONFIG_DISABLE_MOUNTPOINT=y
 # CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
+# CONFIG_PSEUDOFS_SOFTLINKS is not set
 # CONFIG_FS_READABLE is not set
 # CONFIG_FS_WRITABLE is not set
 # CONFIG_FS_NAMED_SEMAPHORES is not set
@@ -643,33 +650,89 @@ CONFIG_MM_REGIONS=1
 #
 # Standard C Library Options
 #
+
+#
+# Standard C I/O
+#
+# CONFIG_STDIO_DISABLE_BUFFERING is not set
 CONFIG_STDIO_BUFFER_SIZE=64
 CONFIG_STDIO_LINEBUFFER=y
 CONFIG_NUNGET_CHARS=2
-# CONFIG_LIBM is not set
 # CONFIG_NOPRINTF_FIELDWIDTH is not set
 # CONFIG_LIBC_FLOATINGPOINT is not set
 CONFIG_LIBC_LONG_LONG=y
-# CONFIG_LIBC_IOCTL_VARIADIC is not set
-# CONFIG_LIBC_WCHAR is not set
-# CONFIG_LIBC_LOCALE is not set
-CONFIG_LIB_RAND_ORDER=1
+# CONFIG_LIBC_SCANSET is not set
 # CONFIG_EOL_IS_CR is not set
 # CONFIG_EOL_IS_LF is not set
 # CONFIG_EOL_IS_BOTH_CRLF is not set
 CONFIG_EOL_IS_EITHER_CRLF=y
+# CONFIG_MEMCPY_VIK is not set
+# CONFIG_LIBM is not set
+
+#
+# Architecture-Specific Support
+#
+CONFIG_ARCH_LOWPUTC=y
+# CONFIG_ARCH_ROMGETC is not set
+# CONFIG_LIBC_ARCH_MEMCPY is not set
+# CONFIG_LIBC_ARCH_MEMCMP is not set
+# CONFIG_LIBC_ARCH_MEMMOVE is not set
+# CONFIG_LIBC_ARCH_MEMSET is not set
+# CONFIG_LIBC_ARCH_STRCHR is not set
+# CONFIG_LIBC_ARCH_STRCMP is not set
+# CONFIG_LIBC_ARCH_STRCPY is not set
+# CONFIG_LIBC_ARCH_STRNCPY is not set
+# CONFIG_LIBC_ARCH_STRLEN is not set
+# CONFIG_LIBC_ARCH_STRNLEN is not set
+# CONFIG_LIBC_ARCH_ELF is not set
+
+#
+# stdlib Options
+#
+CONFIG_LIB_RAND_ORDER=1
+
+#
+# Program Execution Options
+#
 # CONFIG_LIBC_EXECFUNCS is not set
 CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=1024
 CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=2048
+
+#
+# errno Decode Support
+#
 # CONFIG_LIBC_STRERROR is not set
 # CONFIG_LIBC_PERROR_STDOUT is not set
-CONFIG_ARCH_LOWPUTC=y
+
+#
+# memcpy/memset Options
+#
+# CONFIG_MEMSET_OPTSPEED is not set
+# CONFIG_LIBC_DLLFCN is not set
+# CONFIG_LIBC_MODLIB is not set
+# CONFIG_LIBC_WCHAR is not set
+# CONFIG_LIBC_LOCALE is not set
+
+#
+# Time/Time Zone Support
+#
 # CONFIG_TIME_EXTENDED is not set
-CONFIG_LIB_SENDFILE_BUFSIZE=512
-# CONFIG_ARCH_ROMGETC is not set
 CONFIG_ARCH_HAVE_TLS=y
+
+#
+# Thread Local Storage (TLS)
+#
 # CONFIG_TLS is not set
+
+#
+# Network-Related Options
+#
+# CONFIG_LIBC_IPv6_ADDRCONV is not set
 CONFIG_LIBC_NETDB=y
+
+#
+# NETDB Support
+#
 CONFIG_NETDB_DNSCLIENT=y
 CONFIG_NETDB_DNSCLIENT_ENTRIES=4
 CONFIG_NETDB_DNSCLIENT_NAMESIZE=32
@@ -677,6 +740,8 @@ CONFIG_NETDB_DNSCLIENT_LIFESEC=3600
 CONFIG_NETDB_DNSCLIENT_MAXRESPONSE=96
 CONFIG_NETDB_DNSSERVER_NOADDR=y
 # CONFIG_NETDB_DNSSERVER_IPv4 is not set
+# CONFIG_LIBC_IOCTL_VARIADIC is not set
+CONFIG_LIB_SENDFILE_BUFSIZE=512
 
 #
 # Non-standard Library Support
@@ -744,13 +809,13 @@ CONFIG_EXAMPLES_NSH=y
 # CONFIG_EXAMPLES_SLCD is not set
 # CONFIG_EXAMPLES_SMART is not set
 # CONFIG_EXAMPLES_SMP is not set
+# CONFIG_EXAMPLES_STAT is not set
 # CONFIG_EXAMPLES_TCPECHO is not set
 # CONFIG_EXAMPLES_TELNETD is not set
 # CONFIG_EXAMPLES_TIFF is not set
 # CONFIG_EXAMPLES_TOUCHSCREEN is not set
 # CONFIG_EXAMPLES_UDP is not set
 # CONFIG_EXAMPLES_UDPBLASTER is not set
-# CONFIG_EXAMPLES_USBTERM is not set
 # CONFIG_EXAMPLES_WATCHDOG is not set
 # CONFIG_EXAMPLES_WEBSERVER is not set
 # CONFIG_EXAMPLES_WGET is not set
@@ -884,6 +949,7 @@ CONFIG_NSH_MMCSDMINOR=0
 # Configure Command Options
 #
 CONFIG_NSH_CMDOPT_DF_H=y
+# CONFIG_NSH_CMDOPT_DD_STATS is not set
 CONFIG_NSH_CODECS_BUFSIZE=128
 CONFIG_NSH_CMDOPT_HEXDUMP=y
 CONFIG_NSH_FILEIOSIZE=1024

configs/cc3200-launchpad/nsh/defconfig

@@ -60,9 +60,12 @@ CONFIG_ARCH_ARM=y
 # CONFIG_ARCH_AVR is not set
 # CONFIG_ARCH_HC is not set
 # CONFIG_ARCH_MIPS is not set
+# CONFIG_ARCH_MISOC is not set
 # CONFIG_ARCH_RENESAS is not set
+# CONFIG_ARCH_RISCV is not set
 # CONFIG_ARCH_SIM is not set
 # CONFIG_ARCH_X86 is not set
+# CONFIG_ARCH_XTENSA is not set
 # CONFIG_ARCH_Z16 is not set
 # CONFIG_ARCH_Z80 is not set
 CONFIG_ARCH="arm"
@@ -102,7 +105,9 @@ CONFIG_ARCH_CHIP_TIVA=y
 # CONFIG_ARCH_ARM926EJS is not set
 # CONFIG_ARCH_ARM920T is not set
 # CONFIG_ARCH_CORTEXM0 is not set
+# CONFIG_ARCH_CORTEXM23 is not set
 # CONFIG_ARCH_CORTEXM3 is not set
+# CONFIG_ARCH_CORTEXM33 is not set
 CONFIG_ARCH_CORTEXM4=y
 # CONFIG_ARCH_CORTEXM7 is not set
 # CONFIG_ARCH_CORTEXA5 is not set
@@ -248,6 +253,7 @@ CONFIG_ARCH_IRQPRIO=y
 # CONFIG_ARCH_HAVE_RAMFUNCS is not set
 CONFIG_ARCH_HAVE_RAMVECTORS=y
 # CONFIG_ARCH_RAMVECTORS is not set
+# CONFIG_ARCH_MINIMAL_VECTORTABLE is not set
 
 #
 # Board Settings
@@ -294,11 +300,11 @@ CONFIG_ARCH_LEDS=y
 CONFIG_ARCH_HAVE_BUTTONS=y
 # CONFIG_ARCH_BUTTONS is not set
 CONFIG_ARCH_HAVE_IRQBUTTONS=y
-CONFIG_NSH_MMCSDMINOR=0
 
 #
 # Board-Specific Options
 #
+# CONFIG_BOARD_CRASHDUMP is not set
 # CONFIG_LIB_BOARDCTL is not set
 
 #
@@ -317,6 +323,7 @@ CONFIG_DISABLE_OS_API=y
 CONFIG_USEC_PER_TICK=10000
 # CONFIG_SYSTEM_TIME64 is not set
 # CONFIG_CLOCK_MONOTONIC is not set
+# CONFIG_ARCH_HAVE_TIMEKEEPING is not set
 # CONFIG_JULIAN_TIME is not set
 CONFIG_START_YEAR=2014
 CONFIG_START_MONTH=8
@@ -346,6 +353,8 @@ CONFIG_SCHED_WAITPID=y
 #
 # CONFIG_MUTEX_TYPES is not set
 CONFIG_NPTHREAD_KEYS=4
+# CONFIG_PTHREAD_CLEANUP is not set
+# CONFIG_CANCELLATION_POINTS is not set
 
 #
 # Performance Monitoring
@@ -410,6 +419,7 @@ CONFIG_PTHREAD_STACK_DEFAULT=2048
 CONFIG_DISABLE_POLL=y
 CONFIG_DEV_NULL=y
 # CONFIG_DEV_ZERO is not set
+# CONFIG_DEV_URANDOM is not set
 # CONFIG_DEV_LOOP is not set
 
 #
@@ -424,6 +434,9 @@ CONFIG_DEV_NULL=y
 # CONFIG_PWM is not set
 # CONFIG_ARCH_HAVE_I2CRESET is not set
 # CONFIG_I2C is not set
+# CONFIG_ARCH_HAVE_SPI_CRCGENERATION is not set
+# CONFIG_ARCH_HAVE_SPI_CS_CONTROL is not set
+# CONFIG_ARCH_HAVE_SPI_BITORDER is not set
 # CONFIG_SPI is not set
 # CONFIG_I2S is not set
 
@@ -431,6 +444,7 @@ CONFIG_DEV_NULL=y
 # Timer Driver Support
 #
 # CONFIG_TIMER is not set
+# CONFIG_ONESHOT is not set
 # CONFIG_RTC is not set
 # CONFIG_WATCHDOG is not set
 # CONFIG_ANALOG is not set
@@ -438,7 +452,12 @@ CONFIG_DEV_NULL=y
 # CONFIG_VIDEO_DEVICES is not set
 # CONFIG_BCH is not set
 # CONFIG_INPUT is not set
+
+#
+# IO Expander/GPIO Support
+#
 # CONFIG_IOEXPANDER is not set
+# CONFIG_DEV_GPIO is not set
 
 #
 # LCD Driver Support
@@ -510,9 +529,12 @@ CONFIG_UART0_2STOP=0
 # CONFIG_UART0_IFLOWCONTROL is not set
 # CONFIG_UART0_OFLOWCONTROL is not set
 # CONFIG_UART0_DMA is not set
+# CONFIG_PSEUDOTERM is not set
 # CONFIG_USBDEV is not set
 # CONFIG_USBHOST is not set
+# CONFIG_HAVE_USBTRACE is not set
 # CONFIG_DRIVERS_WIRELESS is not set
+# CONFIG_DRIVERS_CONTACTLESS is not set
 
 #
 # System Logging
@@ -526,6 +548,7 @@ CONFIG_SYSLOG_SERIAL_CONSOLE=y
 CONFIG_SYSLOG_CONSOLE=y
 # CONFIG_SYSLOG_NONE is not set
 # CONFIG_SYSLOG_FILE is not set
+# CONFIG_SYSLOG_CHARDEV is not set
 
 #
 # Networking Support
@@ -549,6 +572,7 @@ CONFIG_SYSLOG_CONSOLE=y
 # CONFIG_DISABLE_MOUNTPOINT is not set
 # CONFIG_FS_AUTOMOUNTER is not set
 # CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
+# CONFIG_PSEUDOFS_SOFTLINKS is not set
 CONFIG_FS_READABLE=y
 # CONFIG_FS_WRITABLE is not set
 # CONFIG_FS_NAMED_SEMAPHORES is not set
@@ -612,34 +636,96 @@ CONFIG_PIC=y
 #
 # Standard C Library Options
 #
+
+#
+# Standard C I/O
+#
+# CONFIG_STDIO_DISABLE_BUFFERING is not set
 CONFIG_STDIO_BUFFER_SIZE=128
 CONFIG_STDIO_LINEBUFFER=y
 CONFIG_NUNGET_CHARS=2
-CONFIG_LIB_HOMEDIR="/"
-# CONFIG_LIBM is not set
 # CONFIG_NOPRINTF_FIELDWIDTH is not set
 # CONFIG_LIBC_FLOATINGPOINT is not set
 CONFIG_LIBC_LONG_LONG=y
-# CONFIG_LIBC_IOCTL_VARIADIC is not set
-CONFIG_LIB_RAND_ORDER=1
+# CONFIG_LIBC_SCANSET is not set
 # CONFIG_EOL_IS_CR is not set
 # CONFIG_EOL_IS_LF is not set
 # CONFIG_EOL_IS_BOTH_CRLF is not set
 CONFIG_EOL_IS_EITHER_CRLF=y
+# CONFIG_MEMCPY_VIK is not set
+# CONFIG_LIBM is not set
+
+#
+# Architecture-Specific Support
+#
+CONFIG_ARCH_LOWPUTC=y
+# CONFIG_ARCH_ROMGETC is not set
+# CONFIG_LIBC_ARCH_MEMCPY is not set
+# CONFIG_LIBC_ARCH_MEMCMP is not set
+# CONFIG_LIBC_ARCH_MEMMOVE is not set
+# CONFIG_LIBC_ARCH_MEMSET is not set
+# CONFIG_LIBC_ARCH_STRCHR is not set
+# CONFIG_LIBC_ARCH_STRCMP is not set
+# CONFIG_LIBC_ARCH_STRCPY is not set
+# CONFIG_LIBC_ARCH_STRNCPY is not set
+# CONFIG_LIBC_ARCH_STRLEN is not set
+# CONFIG_LIBC_ARCH_STRNLEN is not set
+# CONFIG_LIBC_ARCH_ELF is not set
+# CONFIG_ARMV7M_MEMCPY is not set
+
+#
+# stdlib Options
+#
+CONFIG_LIB_RAND_ORDER=1
+CONFIG_LIB_HOMEDIR="/"
+
+#
+# Program Execution Options
+#
 # CONFIG_LIBC_EXECFUNCS is not set
 CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=1024
 CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=2048
+
+#
+# errno Decode Support
+#
 # CONFIG_LIBC_STRERROR is not set
 # CONFIG_LIBC_PERROR_STDOUT is not set
-CONFIG_ARCH_LOWPUTC=y
+
+#
+# memcpy/memset Options
+#
+# CONFIG_MEMSET_OPTSPEED is not set
+# CONFIG_LIBC_DLLFCN is not set
+# CONFIG_LIBC_MODLIB is not set
+# CONFIG_LIBC_WCHAR is not set
+# CONFIG_LIBC_LOCALE is not set
+
+#
+# Time/Time Zone Support
+#
 # CONFIG_LIBC_LOCALTIME is not set
 # CONFIG_TIME_EXTENDED is not set
-CONFIG_LIB_SENDFILE_BUFSIZE=512
-# CONFIG_ARCH_ROMGETC is not set
 CONFIG_ARCH_HAVE_TLS=y
+
+#
+# Thread Local Storage (TLS)
+#
 # CONFIG_TLS is not set
+
+#
+# Network-Related Options
+#
+# CONFIG_LIBC_IPv4_ADDRCONV is not set
+# CONFIG_LIBC_IPv6_ADDRCONV is not set
 # CONFIG_LIBC_NETDB is not set
+
+#
+# NETDB Support
+#
 # CONFIG_NETDB_HOSTFILE is not set
+# CONFIG_LIBC_IOCTL_VARIADIC is not set
+CONFIG_LIB_SENDFILE_BUFSIZE=512
 
 #
 # Non-standard Library Support
@@ -647,6 +733,7 @@ CONFIG_ARCH_HAVE_TLS=y
 # CONFIG_LIB_CRC64_FAST is not set
 # CONFIG_LIB_KBDCODEC is not set
 # CONFIG_LIB_SLCDCODEC is not set
+# CONFIG_LIB_HEX2BIN is not set
 
 #
 # Basic CXX Support
@@ -670,9 +757,10 @@ CONFIG_BUILTIN_PROXY_STACKSIZE=512
 #
 # Examples
 #
+# CONFIG_EXAMPLES_BUTTONS is not set
+# CONFIG_EXAMPLES_CCTYPE is not set
 # CONFIG_EXAMPLES_CHAT is not set
 # CONFIG_EXAMPLES_CONFIGDATA is not set
-# CONFIG_EXAMPLES_CPUHOG is not set
 # CONFIG_EXAMPLES_DHCPD is not set
 # CONFIG_EXAMPLES_ELF is not set
 # CONFIG_EXAMPLES_FTPC is not set
@@ -699,9 +787,9 @@ CONFIG_EXAMPLES_NSH=y
 # CONFIG_EXAMPLES_NXTEXT is not set
 # CONFIG_EXAMPLES_OSTEST is not set
 # CONFIG_EXAMPLES_PCA9635 is not set
-# CONFIG_EXAMPLES_PIPE is not set
 # CONFIG_EXAMPLES_POSIXSPAWN is not set
 # CONFIG_EXAMPLES_PPPD is not set
+# CONFIG_EXAMPLES_RFID_READUID is not set
 # CONFIG_EXAMPLES_RGBLED is not set
 # CONFIG_EXAMPLES_SENDMAIL is not set
 # CONFIG_EXAMPLES_SERIALBLASTER is not set
@@ -711,11 +799,11 @@ CONFIG_EXAMPLES_NSH=y
 # CONFIG_EXAMPLES_SMART is not set
 # CONFIG_EXAMPLES_SMART_TEST is not set
 # CONFIG_EXAMPLES_SMP is not set
+# CONFIG_EXAMPLES_STAT is not set
 # CONFIG_EXAMPLES_TCPECHO is not set
 # CONFIG_EXAMPLES_TELNETD is not set
 # CONFIG_EXAMPLES_TIFF is not set
 # CONFIG_EXAMPLES_TOUCHSCREEN is not set
-# CONFIG_EXAMPLES_USBTERM is not set
 # CONFIG_EXAMPLES_WATCHDOG is not set
 # CONFIG_EXAMPLES_WEBSERVER is not set
 
@@ -742,6 +830,7 @@ CONFIG_EXAMPLES_NSH=y
 # CONFIG_INTERPRETERS_BAS is not set
 # CONFIG_INTERPRETERS_FICL is not set
 # CONFIG_INTERPRETERS_MICROPYTHON is not set
+# CONFIG_INTERPRETERS_MINIBASIC is not set
 # CONFIG_INTERPRETERS_PCODE is not set
 
 #
@@ -807,12 +896,12 @@ CONFIG_NSH_DISABLE_LOSMART=y
 # CONFIG_NSH_DISABLE_LS is not set
 # CONFIG_NSH_DISABLE_MB is not set
 # CONFIG_NSH_DISABLE_MKDIR is not set
-# CONFIG_NSH_DISABLE_MKFIFO is not set
 # CONFIG_NSH_DISABLE_MKRD is not set
 # CONFIG_NSH_DISABLE_MH is not set
 # CONFIG_NSH_DISABLE_MOUNT is not set
 # CONFIG_NSH_DISABLE_MV is not set
 # CONFIG_NSH_DISABLE_MW is not set
+CONFIG_NSH_DISABLE_PRINTF=y
 # CONFIG_NSH_DISABLE_PS is not set
 # CONFIG_NSH_DISABLE_PUT is not set
 # CONFIG_NSH_DISABLE_PWD is not set
@@ -829,11 +918,13 @@ CONFIG_NSH_DISABLE_LOSMART=y
 # CONFIG_NSH_DISABLE_USLEEP is not set
 # CONFIG_NSH_DISABLE_WGET is not set
 # CONFIG_NSH_DISABLE_XD is not set
+CONFIG_NSH_MMCSDMINOR=0
 
 #
 # Configure Command Options
 #
 CONFIG_NSH_CMDOPT_DF_H=y
+# CONFIG_NSH_CMDOPT_DD_STATS is not set
 CONFIG_NSH_CODECS_BUFSIZE=128
 CONFIG_NSH_CMDOPT_HEXDUMP=y
 CONFIG_NSH_PROC_MOUNTPOINT="/proc"
@@ -870,7 +961,7 @@ CONFIG_NSH_CONSOLE=y
 # CONFIG_SYSTEM_CLE is not set
 # CONFIG_SYSTEM_CUTERM is not set
 # CONFIG_SYSTEM_FREE is not set
-# CONFIG_LIB_HEX2BIN is not set
+# CONFIG_SYSTEM_HEX2BIN is not set
 # CONFIG_SYSTEM_HEXED is not set
 # CONFIG_SYSTEM_INSTALL is not set
 # CONFIG_SYSTEM_RAMTEST is not set
@@ -880,6 +971,8 @@ CONFIG_READLINE_ECHO=y
 # CONFIG_READLINE_TABCOMPLETION is not set
 # CONFIG_READLINE_CMD_HISTORY is not set
 # CONFIG_SYSTEM_SUDOKU is not set
+# CONFIG_SYSTEM_SYSTEM is not set
+# CONFIG_SYSTEM_TEE is not set
 # CONFIG_SYSTEM_UBLOXMODEM is not set
 # CONFIG_SYSTEM_VI is not set
 # CONFIG_SYSTEM_ZMODEM is not set

configs/cloudctrl/nsh/defconfig

@@ -12,8 +12,10 @@
 # CONFIG_HOST_OSX is not set
 CONFIG_HOST_WINDOWS=y
 # CONFIG_HOST_OTHER is not set
+CONFIG_TOOLCHAIN_WINDOWS=y
 # CONFIG_WINDOWS_NATIVE is not set
 CONFIG_WINDOWS_CYGWIN=y
+# CONFIG_WINDOWS_UBUNTU is not set
 # CONFIG_WINDOWS_MSYS is not set
 # CONFIG_WINDOWS_OTHER is not set
 
@@ -110,7 +112,9 @@ CONFIG_ARCH_CHIP_STM32=y
 # CONFIG_ARCH_ARM926EJS is not set
 # CONFIG_ARCH_ARM920T is not set
 # CONFIG_ARCH_CORTEXM0 is not set
+# CONFIG_ARCH_CORTEXM23 is not set
 CONFIG_ARCH_CORTEXM3=y
+# CONFIG_ARCH_CORTEXM33 is not set
 # CONFIG_ARCH_CORTEXM4 is not set
 # CONFIG_ARCH_CORTEXM7 is not set
 # CONFIG_ARCH_CORTEXA5 is not set
@@ -235,6 +239,15 @@ CONFIG_ARCH_CHIP_STM32F107VC=y
 # CONFIG_ARCH_CHIP_STM32F303RE is not set
 # CONFIG_ARCH_CHIP_STM32F303VB is not set
 # CONFIG_ARCH_CHIP_STM32F303VC is not set
+# CONFIG_ARCH_CHIP_STM32F334K4 is not set
+# CONFIG_ARCH_CHIP_STM32F334K6 is not set
+# CONFIG_ARCH_CHIP_STM32F334K8 is not set
+# CONFIG_ARCH_CHIP_STM32F334C4 is not set
+# CONFIG_ARCH_CHIP_STM32F334C6 is not set
+# CONFIG_ARCH_CHIP_STM32F334C8 is not set
+# CONFIG_ARCH_CHIP_STM32F334R4 is not set
+# CONFIG_ARCH_CHIP_STM32F334R6 is not set
+# CONFIG_ARCH_CHIP_STM32F334R8 is not set
 # CONFIG_ARCH_CHIP_STM32F372C8 is not set
 # CONFIG_ARCH_CHIP_STM32F372R8 is not set
 # CONFIG_ARCH_CHIP_STM32F372V8 is not set
@@ -308,6 +321,7 @@ CONFIG_STM32_CONNECTIVITYLINE=y
 # CONFIG_STM32_STM32F30XX is not set
 # CONFIG_STM32_STM32F302 is not set
 # CONFIG_STM32_STM32F303 is not set
+# CONFIG_STM32_STM32F33XX is not set
 # CONFIG_STM32_STM32F37XX is not set
 # CONFIG_STM32_STM32F40XX is not set
 # CONFIG_STM32_STM32F401 is not set
@@ -327,6 +341,7 @@ CONFIG_STM32_CONNECTIVITYLINE=y
 # CONFIG_STM32_HAVE_USBDEV is not set
 CONFIG_STM32_HAVE_OTGFS=y
 # CONFIG_STM32_HAVE_FSMC is not set
+# CONFIG_STM32_HAVE_HRTIM1 is not set
 # CONFIG_STM32_HAVE_LTDC is not set
 CONFIG_STM32_HAVE_USART3=y
 CONFIG_STM32_HAVE_UART4=y
@@ -366,6 +381,9 @@ CONFIG_STM32_HAVE_ADC2=y
 # CONFIG_STM32_HAVE_SDADC3_DMA is not set
 CONFIG_STM32_HAVE_CAN1=y
 CONFIG_STM32_HAVE_CAN2=y
+# CONFIG_STM32_HAVE_COMP2 is not set
+# CONFIG_STM32_HAVE_COMP4 is not set
+# CONFIG_STM32_HAVE_COMP6 is not set
 CONFIG_STM32_HAVE_DAC1=y
 CONFIG_STM32_HAVE_DAC2=y
 # CONFIG_STM32_HAVE_RNG is not set
@@ -379,6 +397,7 @@ CONFIG_STM32_HAVE_SPI3=y
 # CONFIG_STM32_HAVE_SPI6 is not set
 # CONFIG_STM32_HAVE_SAIPLL is not set
 # CONFIG_STM32_HAVE_I2SPLL is not set
+# CONFIG_STM32_HAVE_OPAMP is not set
 # CONFIG_STM32_ADC1 is not set
 # CONFIG_STM32_ADC2 is not set
 CONFIG_STM32_BKP=y
@@ -533,6 +552,7 @@ CONFIG_ARCH_STACKDUMP=y
 # CONFIG_ARCH_HAVE_RAMFUNCS is not set
 CONFIG_ARCH_HAVE_RAMVECTORS=y
 # CONFIG_ARCH_RAMVECTORS is not set
+# CONFIG_ARCH_MINIMAL_VECTORTABLE is not set
 
 #
 # Board Settings
@@ -615,6 +635,9 @@ CONFIG_USEC_PER_TICK=10000
 # CONFIG_CLOCK_MONOTONIC is not set
 CONFIG_ARCH_HAVE_TIMEKEEPING=y
 # CONFIG_JULIAN_TIME is not set
+CONFIG_START_YEAR=2017
+CONFIG_START_MONTH=1
+CONFIG_START_DAY=1
 CONFIG_MAX_WDOGPARMS=2
 CONFIG_PREALLOC_WDOGS=8
 CONFIG_WDOG_INTRESERVE=1
@@ -623,6 +646,7 @@ CONFIG_PREALLOC_TIMERS=4
 #
 # Tasks and Scheduling
 #
+# CONFIG_SPINLOCK is not set
 # CONFIG_INIT_NONE is not set
 CONFIG_INIT_ENTRYPOINT=y
 # CONFIG_INIT_FILEPATH is not set
@@ -639,6 +663,8 @@ CONFIG_SCHED_WAITPID=y
 #
 # CONFIG_MUTEX_TYPES is not set
 CONFIG_NPTHREAD_KEYS=4
+# CONFIG_PTHREAD_CLEANUP is not set
+# CONFIG_CANCELLATION_POINTS is not set
 
 #
 # Performance Monitoring
@@ -723,10 +749,10 @@ CONFIG_DEV_NULL=y
 # CONFIG_PWM is not set
 CONFIG_ARCH_HAVE_I2CRESET=y
 # CONFIG_I2C is not set
-CONFIG_SPI=y
 # CONFIG_ARCH_HAVE_SPI_CRCGENERATION is not set
 # CONFIG_ARCH_HAVE_SPI_CS_CONTROL is not set
 CONFIG_ARCH_HAVE_SPI_BITORDER=y
+CONFIG_SPI=y
 # CONFIG_SPI_SLAVE is not set
 CONFIG_SPI_EXCHANGE=y
 # CONFIG_SPI_CMDDATA is not set
@@ -785,6 +811,7 @@ CONFIG_MMCSD_SPI=y
 CONFIG_MMCSD_SPICLOCK=12500000
 CONFIG_MMCSD_SPIMODE=0
 # CONFIG_ARCH_HAVE_SDIO is not set
+# CONFIG_SDIO_DMA is not set
 # CONFIG_ARCH_HAVE_SDIOWAIT_WRCOMPLETE is not set
 # CONFIG_MODEM is not set
 # CONFIG_MTD is not set
@@ -808,7 +835,6 @@ CONFIG_TELNET_TXBUFFER_SIZE=256
 # CONFIG_NET_DM90x0 is not set
 # CONFIG_ENC28J60 is not set
 # CONFIG_ENCX24J600 is not set
-
 # CONFIG_NET_SLIP is not set
 # CONFIG_NET_FTMAC100 is not set
 
@@ -1033,6 +1059,7 @@ CONFIG_NET_HOSTNAME=""
 # CONFIG_DISABLE_MOUNTPOINT is not set
 # CONFIG_FS_AUTOMOUNTER is not set
 # CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
+# CONFIG_PSEUDOFS_SOFTLINKS is not set
 CONFIG_FS_READABLE=y
 CONFIG_FS_WRITABLE=y
 # CONFIG_FS_NAMED_SEMAPHORES is not set
@@ -1095,37 +1122,94 @@ CONFIG_BUILTIN=y
 #
 # Standard C Library Options
 #
+
+#
+# Standard C I/O
+#
+# CONFIG_STDIO_DISABLE_BUFFERING is not set
 CONFIG_STDIO_BUFFER_SIZE=64
 CONFIG_STDIO_LINEBUFFER=y
 CONFIG_NUNGET_CHARS=2
-CONFIG_LIB_HOMEDIR="/"
-# CONFIG_LIBM is not set
 # CONFIG_NOPRINTF_FIELDWIDTH is not set
 # CONFIG_LIBC_FLOATINGPOINT is not set
 CONFIG_LIBC_LONG_LONG=y
-# CONFIG_LIBC_IOCTL_VARIADIC is not set
-# CONFIG_LIBC_WCHAR is not set
-# CONFIG_LIBC_LOCALE is not set
-CONFIG_LIB_RAND_ORDER=1
+# CONFIG_LIBC_SCANSET is not set
 # CONFIG_EOL_IS_CR is not set
 # CONFIG_EOL_IS_LF is not set
 # CONFIG_EOL_IS_BOTH_CRLF is not set
 CONFIG_EOL_IS_EITHER_CRLF=y
+# CONFIG_MEMCPY_VIK is not set
+# CONFIG_LIBM is not set
+
+#
+# Architecture-Specific Support
+#
+CONFIG_ARCH_LOWPUTC=y
+# CONFIG_ARCH_ROMGETC is not set
+# CONFIG_LIBC_ARCH_MEMCPY is not set
+# CONFIG_LIBC_ARCH_MEMCMP is not set
+# CONFIG_LIBC_ARCH_MEMMOVE is not set
+# CONFIG_LIBC_ARCH_MEMSET is not set
+# CONFIG_LIBC_ARCH_STRCHR is not set
+# CONFIG_LIBC_ARCH_STRCMP is not set
+# CONFIG_LIBC_ARCH_STRCPY is not set
+# CONFIG_LIBC_ARCH_STRNCPY is not set
+# CONFIG_LIBC_ARCH_STRLEN is not set
+# CONFIG_LIBC_ARCH_STRNLEN is not set
+# CONFIG_LIBC_ARCH_ELF is not set
+# CONFIG_ARMV7M_MEMCPY is not set
+
+#
+# stdlib Options
+#
+CONFIG_LIB_RAND_ORDER=1
+CONFIG_LIB_HOMEDIR="/"
+CONFIG_LIBC_TMPDIR="/tmp"
+CONFIG_LIBC_MAX_TMPFILE=32
+
+#
+# Program Execution Options
+#
 # CONFIG_LIBC_EXECFUNCS is not set
 CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=1024
 CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=2048
+
+#
+# errno Decode Support
+#
 # CONFIG_LIBC_STRERROR is not set
 # CONFIG_LIBC_PERROR_STDOUT is not set
-CONFIG_LIBC_TMPDIR="/tmp"
-CONFIG_LIBC_MAX_TMPFILE=32
-CONFIG_ARCH_LOWPUTC=y
+
+#
+# memcpy/memset Options
+#
+# CONFIG_MEMSET_OPTSPEED is not set
+# CONFIG_LIBC_DLLFCN is not set
+# CONFIG_LIBC_MODLIB is not set
+# CONFIG_LIBC_WCHAR is not set
+# CONFIG_LIBC_LOCALE is not set
+
+#
+# Time/Time Zone Support
+#
 # CONFIG_LIBC_LOCALTIME is not set
 # CONFIG_TIME_EXTENDED is not set
-CONFIG_LIB_SENDFILE_BUFSIZE=512
-# CONFIG_ARCH_ROMGETC is not set
 CONFIG_ARCH_HAVE_TLS=y
+
+#
+# Thread Local Storage (TLS)
+#
 # CONFIG_TLS is not set
+
+#
+# Network-Related Options
+#
+# CONFIG_LIBC_IPv6_ADDRCONV is not set
 CONFIG_LIBC_NETDB=y
+
+#
+# NETDB Support
+#
 # CONFIG_NETDB_HOSTFILE is not set
 CONFIG_NETDB_DNSCLIENT=y
 CONFIG_NETDB_DNSCLIENT_ENTRIES=8
@@ -1135,6 +1219,8 @@ CONFIG_NETDB_DNSCLIENT_MAXRESPONSE=96
 # CONFIG_NETDB_RESOLVCONF is not set
 CONFIG_NETDB_DNSSERVER_NOADDR=y
 # CONFIG_NETDB_DNSSERVER_IPv4 is not set
+# CONFIG_LIBC_IOCTL_VARIADIC is not set
+CONFIG_LIB_SENDFILE_BUFSIZE=512
 
 #
 # Non-standard Library Support
@@ -1152,6 +1238,11 @@ CONFIG_HAVE_CXX=y
 # CONFIG_HAVE_CXXINITIALIZE is not set
 # CONFIG_CXX_NEWLONG is not set
 
+#
+# LLVM C++ Library (libcxx)
+#
+# CONFIG_LIBCXX is not set
+
 #
 # uClibc++ Standard C++ Library
 #
@@ -1219,6 +1310,7 @@ CONFIG_EXAMPLES_NSH=y
 # CONFIG_EXAMPLES_SMART is not set
 # CONFIG_EXAMPLES_SMART_TEST is not set
 # CONFIG_EXAMPLES_SMP is not set
+# CONFIG_EXAMPLES_STAT is not set
 # CONFIG_EXAMPLES_TCPECHO is not set
 # CONFIG_EXAMPLES_TELNETD is not set
 # CONFIG_EXAMPLES_TIFF is not set
@@ -1226,7 +1318,6 @@ CONFIG_EXAMPLES_NSH=y
 # CONFIG_EXAMPLES_UDP is not set
 # CONFIG_EXAMPLES_UDPBLASTER is not set
 # CONFIG_EXAMPLES_USBSERIAL is not set
-# CONFIG_EXAMPLES_USBTERM is not set
 # CONFIG_EXAMPLES_WATCHDOG is not set
 # CONFIG_EXAMPLES_WEBSERVER is not set
 # CONFIG_EXAMPLES_XMLRPC is not set
@@ -1368,6 +1459,7 @@ CONFIG_NSH_MMCSDSPIPORTNO=1
 # Configure Command Options
 #
 CONFIG_NSH_CMDOPT_DF_H=y
+# CONFIG_NSH_CMDOPT_DD_STATS is not set
 CONFIG_NSH_CODECS_BUFSIZE=128
 CONFIG_NSH_CMDOPT_HEXDUMP=y
 CONFIG_NSH_FILEIOSIZE=512

configs/dk-tm4c129x/ipv6/defconfig

@@ -12,8 +12,10 @@
 # CONFIG_HOST_OSX is not set
 CONFIG_HOST_WINDOWS=y
 # CONFIG_HOST_OTHER is not set
+CONFIG_TOOLCHAIN_WINDOWS=y
 # CONFIG_WINDOWS_NATIVE is not set
 CONFIG_WINDOWS_CYGWIN=y
+# CONFIG_WINDOWS_UBUNTU is not set
 # CONFIG_WINDOWS_MSYS is not set
 # CONFIG_WINDOWS_OTHER is not set
 
@@ -109,7 +111,9 @@ CONFIG_ARCH_CHIP_TIVA=y
 # CONFIG_ARCH_ARM926EJS is not set
 # CONFIG_ARCH_ARM920T is not set
 # CONFIG_ARCH_CORTEXM0 is not set
+# CONFIG_ARCH_CORTEXM23 is not set
 # CONFIG_ARCH_CORTEXM3 is not set
+# CONFIG_ARCH_CORTEXM33 is not set
 CONFIG_ARCH_CORTEXM4=y
 # CONFIG_ARCH_CORTEXM7 is not set
 # CONFIG_ARCH_CORTEXA5 is not set
@@ -310,6 +314,7 @@ CONFIG_ARCH_STACKDUMP=y
 # CONFIG_ARCH_HAVE_RAMFUNCS is not set
 CONFIG_ARCH_HAVE_RAMVECTORS=y
 # CONFIG_ARCH_RAMVECTORS is not set
+# CONFIG_ARCH_MINIMAL_VECTORTABLE is not set
 
 #
 # Board Settings
@@ -398,6 +403,7 @@ CONFIG_PREALLOC_TIMERS=4
 #
 # Tasks and Scheduling
 #
+# CONFIG_SPINLOCK is not set
 # CONFIG_INIT_NONE is not set
 CONFIG_INIT_ENTRYPOINT=y
 # CONFIG_INIT_FILEPATH is not set
@@ -414,6 +420,8 @@ CONFIG_SCHED_WAITPID=y
 #
 # CONFIG_MUTEX_TYPES is not set
 CONFIG_NPTHREAD_KEYS=4
+# CONFIG_PTHREAD_CLEANUP is not set
+# CONFIG_CANCELLATION_POINTS is not set
 
 #
 # Performance Monitoring
@@ -502,10 +510,10 @@ CONFIG_I2C=y
 # CONFIG_I2C_POLLED is not set
 # CONFIG_I2C_TRACE is not set
 CONFIG_I2C_DRIVER=y
-# CONFIG_SPI is not set
 # CONFIG_ARCH_HAVE_SPI_CRCGENERATION is not set
 # CONFIG_ARCH_HAVE_SPI_CS_CONTROL is not set
 # CONFIG_ARCH_HAVE_SPI_BITORDER is not set
+# CONFIG_SPI is not set
 # CONFIG_I2S is not set
 
 #
@@ -562,7 +570,6 @@ CONFIG_NETDEVICES=y
 # CONFIG_NET_DM90x0 is not set
 # CONFIG_ENC28J60 is not set
 # CONFIG_ENCX24J600 is not set
-
 # CONFIG_NET_SLIP is not set
 # CONFIG_NET_FTMAC100 is not set
 CONFIG_ARCH_PHY_INTERRUPT=y
@@ -574,6 +581,7 @@ CONFIG_SENSORS=y
 # CONFIG_BH1750FVI is not set
 # CONFIG_BMG160 is not set
 # CONFIG_BMP180 is not set
+# CONFIG_SENSORS_L3GD20 is not set
 # CONFIG_SENSOR_KXTJ9 is not set
 # CONFIG_LIS3DSH is not set
 # CONFIG_LIS331DL is not set
@@ -796,6 +804,7 @@ CONFIG_NET_HOSTNAME=""
 # CONFIG_DISABLE_MOUNTPOINT is not set
 # CONFIG_FS_AUTOMOUNTER is not set
 # CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
+# CONFIG_PSEUDOFS_SOFTLINKS is not set
 # CONFIG_FS_READABLE is not set
 # CONFIG_FS_WRITABLE is not set
 # CONFIG_FS_NAMED_SEMAPHORES is not set
@@ -850,36 +859,95 @@ CONFIG_BUILTIN=y
 #
 # Standard C Library Options
 #
+
+#
+# Standard C I/O
+#
+# CONFIG_STDIO_DISABLE_BUFFERING is not set
 CONFIG_STDIO_BUFFER_SIZE=64
 CONFIG_STDIO_LINEBUFFER=y
 CONFIG_NUNGET_CHARS=2
-CONFIG_LIB_HOMEDIR="/"
-CONFIG_LIBM=y
 # CONFIG_NOPRINTF_FIELDWIDTH is not set
 CONFIG_LIBC_FLOATINGPOINT=y
 CONFIG_LIBC_LONG_LONG=y
-# CONFIG_LIBC_IOCTL_VARIADIC is not set
-# CONFIG_LIBC_WCHAR is not set
-# CONFIG_LIBC_LOCALE is not set
-CONFIG_LIB_RAND_ORDER=1
+# CONFIG_LIBC_SCANSET is not set
 # CONFIG_EOL_IS_CR is not set
 # CONFIG_EOL_IS_LF is not set
 # CONFIG_EOL_IS_BOTH_CRLF is not set
 CONFIG_EOL_IS_EITHER_CRLF=y
+# CONFIG_MEMCPY_VIK is not set
+CONFIG_LIBM=y
+
+#
+# Architecture-Specific Support
+#
+CONFIG_ARCH_LOWPUTC=y
+# CONFIG_ARCH_ROMGETC is not set
+# CONFIG_LIBC_ARCH_MEMCPY is not set
+# CONFIG_LIBC_ARCH_MEMCMP is not set
+# CONFIG_LIBC_ARCH_MEMMOVE is not set
+# CONFIG_LIBC_ARCH_MEMSET is not set
+# CONFIG_LIBC_ARCH_STRCHR is not set
+# CONFIG_LIBC_ARCH_STRCMP is not set
+# CONFIG_LIBC_ARCH_STRCPY is not set
+# CONFIG_LIBC_ARCH_STRNCPY is not set
+# CONFIG_LIBC_ARCH_STRLEN is not set
+# CONFIG_LIBC_ARCH_STRNLEN is not set
+# CONFIG_LIBC_ARCH_ELF is not set
+# CONFIG_ARMV7M_MEMCPY is not set
+
+#
+# stdlib Options
+#
+CONFIG_LIB_RAND_ORDER=1
+CONFIG_LIB_HOMEDIR="/"
+
+#
+# Program Execution Options
+#
 # CONFIG_LIBC_EXECFUNCS is not set
 CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=1024
 CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=2048
+
+#
+# errno Decode Support
+#
 # CONFIG_LIBC_STRERROR is not set
 # CONFIG_LIBC_PERROR_STDOUT is not set
-CONFIG_ARCH_LOWPUTC=y
+
+#
+# memcpy/memset Options
+#
+# CONFIG_MEMSET_OPTSPEED is not set
+# CONFIG_LIBC_DLLFCN is not set
+# CONFIG_LIBC_MODLIB is not set
+# CONFIG_LIBC_WCHAR is not set
+# CONFIG_LIBC_LOCALE is not set
+
+#
+# Time/Time Zone Support
+#
 # CONFIG_LIBC_LOCALTIME is not set
 # CONFIG_TIME_EXTENDED is not set
-CONFIG_LIB_SENDFILE_BUFSIZE=512
-# CONFIG_ARCH_ROMGETC is not set
 CONFIG_ARCH_HAVE_TLS=y
+
+#
+# Thread Local Storage (TLS)
+#
 # CONFIG_TLS is not set
+
+#
+# Network-Related Options
+#
+# CONFIG_LIBC_IPv4_ADDRCONV is not set
 CONFIG_LIBC_NETDB=y
+
+#
+# NETDB Support
+#
 # CONFIG_NETDB_DNSCLIENT is not set
+# CONFIG_LIBC_IOCTL_VARIADIC is not set
+CONFIG_LIB_SENDFILE_BUFSIZE=512
 
 #
 # Non-standard Library Support
@@ -954,6 +1022,7 @@ CONFIG_EXAMPLES_NSH=y
 # CONFIG_EXAMPLES_SMART is not set
 # CONFIG_EXAMPLES_SMART_TEST is not set
 # CONFIG_EXAMPLES_SMP is not set
+# CONFIG_EXAMPLES_STAT is not set
 # CONFIG_EXAMPLES_TCPECHO is not set
 # CONFIG_EXAMPLES_TELNETD is not set
 # CONFIG_EXAMPLES_TIFF is not set
@@ -961,7 +1030,6 @@ CONFIG_EXAMPLES_NSH=y
 # CONFIG_EXAMPLES_UDP is not set
 # CONFIG_EXAMPLES_UDPBLASTER is not set
 # CONFIG_EXAMPLES_USBSERIAL is not set
-# CONFIG_EXAMPLES_USBTERM is not set
 # CONFIG_EXAMPLES_WATCHDOG is not set
 # CONFIG_EXAMPLES_WEBSERVER is not set
 
@@ -1089,6 +1157,7 @@ CONFIG_NSH_MMCSDMINOR=0
 # Configure Command Options
 #
 CONFIG_NSH_CMDOPT_DF_H=y
+# CONFIG_NSH_CMDOPT_DD_STATS is not set
 CONFIG_NSH_CODECS_BUFSIZE=128
 CONFIG_NSH_CMDOPT_HEXDUMP=y
 CONFIG_NSH_FILEIOSIZE=512

configs/dk-tm4c129x/nsh/defconfig

@@ -12,8 +12,10 @@
 # CONFIG_HOST_OSX is not set
 CONFIG_HOST_WINDOWS=y
 # CONFIG_HOST_OTHER is not set
+CONFIG_TOOLCHAIN_WINDOWS=y
 # CONFIG_WINDOWS_NATIVE is not set
 CONFIG_WINDOWS_CYGWIN=y
+# CONFIG_WINDOWS_UBUNTU is not set
 # CONFIG_WINDOWS_MSYS is not set
 # CONFIG_WINDOWS_OTHER is not set
 
@@ -109,7 +111,9 @@ CONFIG_ARCH_CHIP_TIVA=y
 # CONFIG_ARCH_ARM926EJS is not set
 # CONFIG_ARCH_ARM920T is not set
 # CONFIG_ARCH_CORTEXM0 is not set
+# CONFIG_ARCH_CORTEXM23 is not set
 # CONFIG_ARCH_CORTEXM3 is not set
+# CONFIG_ARCH_CORTEXM33 is not set
 CONFIG_ARCH_CORTEXM4=y
 # CONFIG_ARCH_CORTEXM7 is not set
 # CONFIG_ARCH_CORTEXA5 is not set
@@ -310,6 +314,7 @@ CONFIG_ARCH_STACKDUMP=y
 # CONFIG_ARCH_HAVE_RAMFUNCS is not set
 CONFIG_ARCH_HAVE_RAMVECTORS=y
 # CONFIG_ARCH_RAMVECTORS is not set
+# CONFIG_ARCH_MINIMAL_VECTORTABLE is not set
 
 #
 # Board Settings
@@ -398,6 +403,7 @@ CONFIG_PREALLOC_TIMERS=4
 #
 # Tasks and Scheduling
 #
+# CONFIG_SPINLOCK is not set
 # CONFIG_INIT_NONE is not set
 CONFIG_INIT_ENTRYPOINT=y
 # CONFIG_INIT_FILEPATH is not set
@@ -414,6 +420,8 @@ CONFIG_SCHED_WAITPID=y
 #
 # CONFIG_MUTEX_TYPES is not set
 CONFIG_NPTHREAD_KEYS=4
+# CONFIG_PTHREAD_CLEANUP is not set
+# CONFIG_CANCELLATION_POINTS is not set
 
 #
 # Performance Monitoring
@@ -502,10 +510,10 @@ CONFIG_I2C=y
 # CONFIG_I2C_POLLED is not set
 # CONFIG_I2C_TRACE is not set
 CONFIG_I2C_DRIVER=y
-# CONFIG_SPI is not set
 # CONFIG_ARCH_HAVE_SPI_CRCGENERATION is not set
 # CONFIG_ARCH_HAVE_SPI_CS_CONTROL is not set
 # CONFIG_ARCH_HAVE_SPI_BITORDER is not set
+# CONFIG_SPI is not set
 # CONFIG_I2S is not set
 
 #
@@ -564,7 +572,6 @@ CONFIG_TELNET_TXBUFFER_SIZE=256
 # CONFIG_NET_DM90x0 is not set
 # CONFIG_ENC28J60 is not set
 # CONFIG_ENCX24J600 is not set
-
 # CONFIG_NET_SLIP is not set
 # CONFIG_NET_FTMAC100 is not set
 CONFIG_ARCH_PHY_INTERRUPT=y
@@ -576,6 +583,7 @@ CONFIG_SENSORS=y
 # CONFIG_BH1750FVI is not set
 # CONFIG_BMG160 is not set
 # CONFIG_BMP180 is not set
+# CONFIG_SENSORS_L3GD20 is not set
 # CONFIG_SENSOR_KXTJ9 is not set
 # CONFIG_LIS3DSH is not set
 # CONFIG_LIS331DL is not set
@@ -799,6 +807,7 @@ CONFIG_NET_HOSTNAME=""
 # CONFIG_DISABLE_MOUNTPOINT is not set
 # CONFIG_FS_AUTOMOUNTER is not set
 # CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
+# CONFIG_PSEUDOFS_SOFTLINKS is not set
 # CONFIG_FS_READABLE is not set
 # CONFIG_FS_WRITABLE is not set
 # CONFIG_FS_NAMED_SEMAPHORES is not set
@@ -854,35 +863,92 @@ CONFIG_BUILTIN=y
 #
 # Standard C Library Options
 #
+
+#
+# Standard C I/O
+#
+# CONFIG_STDIO_DISABLE_BUFFERING is not set
 CONFIG_STDIO_BUFFER_SIZE=64
 CONFIG_STDIO_LINEBUFFER=y
 CONFIG_NUNGET_CHARS=2
-CONFIG_LIB_HOMEDIR="/"
-CONFIG_LIBM=y
 # CONFIG_NOPRINTF_FIELDWIDTH is not set
 CONFIG_LIBC_FLOATINGPOINT=y
 CONFIG_LIBC_LONG_LONG=y
-# CONFIG_LIBC_IOCTL_VARIADIC is not set
-# CONFIG_LIBC_WCHAR is not set
-# CONFIG_LIBC_LOCALE is not set
-CONFIG_LIB_RAND_ORDER=1
+# CONFIG_LIBC_SCANSET is not set
 # CONFIG_EOL_IS_CR is not set
 # CONFIG_EOL_IS_LF is not set
 # CONFIG_EOL_IS_BOTH_CRLF is not set
 CONFIG_EOL_IS_EITHER_CRLF=y
+# CONFIG_MEMCPY_VIK is not set
+CONFIG_LIBM=y
+
+#
+# Architecture-Specific Support
+#
+CONFIG_ARCH_LOWPUTC=y
+# CONFIG_ARCH_ROMGETC is not set
+# CONFIG_LIBC_ARCH_MEMCPY is not set
+# CONFIG_LIBC_ARCH_MEMCMP is not set
+# CONFIG_LIBC_ARCH_MEMMOVE is not set
+# CONFIG_LIBC_ARCH_MEMSET is not set
+# CONFIG_LIBC_ARCH_STRCHR is not set
+# CONFIG_LIBC_ARCH_STRCMP is not set
+# CONFIG_LIBC_ARCH_STRCPY is not set
+# CONFIG_LIBC_ARCH_STRNCPY is not set
+# CONFIG_LIBC_ARCH_STRLEN is not set
+# CONFIG_LIBC_ARCH_STRNLEN is not set
+# CONFIG_LIBC_ARCH_ELF is not set
+# CONFIG_ARMV7M_MEMCPY is not set
+
+#
+# stdlib Options
+#
+CONFIG_LIB_RAND_ORDER=1
+CONFIG_LIB_HOMEDIR="/"
+
+#
+# Program Execution Options
+#
 # CONFIG_LIBC_EXECFUNCS is not set
 CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=1024
 CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=2048
+
+#
+# errno Decode Support
+#
 # CONFIG_LIBC_STRERROR is not set
 # CONFIG_LIBC_PERROR_STDOUT is not set
-CONFIG_ARCH_LOWPUTC=y
+
+#
+# memcpy/memset Options
+#
+# CONFIG_MEMSET_OPTSPEED is not set
+# CONFIG_LIBC_DLLFCN is not set
+# CONFIG_LIBC_MODLIB is not set
+# CONFIG_LIBC_WCHAR is not set
+# CONFIG_LIBC_LOCALE is not set
+
+#
+# Time/Time Zone Support
+#
 # CONFIG_LIBC_LOCALTIME is not set
 # CONFIG_TIME_EXTENDED is not set
-CONFIG_LIB_SENDFILE_BUFSIZE=512
-# CONFIG_ARCH_ROMGETC is not set
 CONFIG_ARCH_HAVE_TLS=y
+
+#
+# Thread Local Storage (TLS)
+#
 # CONFIG_TLS is not set
+
+#
+# Network-Related Options
+#
+# CONFIG_LIBC_IPv6_ADDRCONV is not set
 CONFIG_LIBC_NETDB=y
+
+#
+# NETDB Support
+#
 CONFIG_NETDB_DNSCLIENT=y
 CONFIG_NETDB_DNSCLIENT_ENTRIES=8
 CONFIG_NETDB_DNSCLIENT_NAMESIZE=32
@@ -890,6 +956,8 @@ CONFIG_NETDB_DNSCLIENT_LIFESEC=3600
 CONFIG_NETDB_DNSCLIENT_MAXRESPONSE=96
 CONFIG_NETDB_DNSSERVER_NOADDR=y
 # CONFIG_NETDB_DNSSERVER_IPv4 is not set
+# CONFIG_LIBC_IOCTL_VARIADIC is not set
+CONFIG_LIB_SENDFILE_BUFSIZE=512
 
 #
 # Non-standard Library Support
@@ -964,6 +1032,7 @@ CONFIG_EXAMPLES_NSH=y
 # CONFIG_EXAMPLES_SMART is not set
 # CONFIG_EXAMPLES_SMART_TEST is not set
 # CONFIG_EXAMPLES_SMP is not set
+# CONFIG_EXAMPLES_STAT is not set
 # CONFIG_EXAMPLES_TCPECHO is not set
 # CONFIG_EXAMPLES_TELNETD is not set
 # CONFIG_EXAMPLES_TIFF is not set
@@ -971,7 +1040,6 @@ CONFIG_EXAMPLES_NSH=y
 # CONFIG_EXAMPLES_UDP is not set
 # CONFIG_EXAMPLES_UDPBLASTER is not set
 # CONFIG_EXAMPLES_USBSERIAL is not set
-# CONFIG_EXAMPLES_USBTERM is not set
 # CONFIG_EXAMPLES_WATCHDOG is not set
 # CONFIG_EXAMPLES_WEBSERVER is not set
 
@@ -1106,6 +1174,7 @@ CONFIG_NSH_MMCSDMINOR=0
 # Configure Command Options
 #
 CONFIG_NSH_CMDOPT_DF_H=y
+# CONFIG_NSH_CMDOPT_DD_STATS is not set
 CONFIG_NSH_CODECS_BUFSIZE=128
 CONFIG_NSH_CMDOPT_HEXDUMP=y
 CONFIG_NSH_FILEIOSIZE=512

configs/ea3131/nsh/defconfig

@@ -12,8 +12,10 @@
 # CONFIG_HOST_OSX is not set
 CONFIG_HOST_WINDOWS=y
 # CONFIG_HOST_OTHER is not set
+CONFIG_TOOLCHAIN_WINDOWS=y
 # CONFIG_WINDOWS_NATIVE is not set
 CONFIG_WINDOWS_CYGWIN=y
+# CONFIG_WINDOWS_UBUNTU is not set
 # CONFIG_WINDOWS_MSYS is not set
 # CONFIG_WINDOWS_OTHER is not set
 
@@ -64,9 +66,12 @@ CONFIG_ARCH_ARM=y
 # CONFIG_ARCH_AVR is not set
 # CONFIG_ARCH_HC is not set
 # CONFIG_ARCH_MIPS is not set
+# CONFIG_ARCH_MISOC is not set
 # CONFIG_ARCH_RENESAS is not set
+# CONFIG_ARCH_RISCV is not set
 # CONFIG_ARCH_SIM is not set
 # CONFIG_ARCH_X86 is not set
+# CONFIG_ARCH_XTENSA is not set
 # CONFIG_ARCH_Z16 is not set
 # CONFIG_ARCH_Z80 is not set
 CONFIG_ARCH="arm"
@@ -106,7 +111,9 @@ CONFIG_ARCH_CHIP_LPC31XX=y
 CONFIG_ARCH_ARM926EJS=y
 # CONFIG_ARCH_ARM920T is not set
 # CONFIG_ARCH_CORTEXM0 is not set
+# CONFIG_ARCH_CORTEXM23 is not set
 # CONFIG_ARCH_CORTEXM3 is not set
+# CONFIG_ARCH_CORTEXM33 is not set
 # CONFIG_ARCH_CORTEXM4 is not set
 # CONFIG_ARCH_CORTEXM7 is not set
 # CONFIG_ARCH_CORTEXA5 is not set
@@ -202,6 +209,7 @@ CONFIG_ARCH_STACKDUMP=y
 # CONFIG_ARCH_IDLE_CUSTOM is not set
 # CONFIG_ARCH_HAVE_RAMFUNCS is not set
 # CONFIG_ARCH_HAVE_RAMVECTORS is not set
+# CONFIG_ARCH_MINIMAL_VECTORTABLE is not set
 
 #
 # Board Settings
@@ -248,11 +256,11 @@ CONFIG_ARCH_HAVE_LEDS=y
 CONFIG_ARCH_LEDS=y
 CONFIG_ARCH_HAVE_BUTTONS=y
 # CONFIG_ARCH_BUTTONS is not set
-CONFIG_NSH_MMCSDMINOR=0
 
 #
 # Board-Specific Options
 #
+# CONFIG_BOARD_CRASHDUMP is not set
 CONFIG_LIB_BOARDCTL=y
 # CONFIG_BOARDCTL_UNIQUEID is not set
 # CONFIG_BOARDCTL_TSCTEST is not set
@@ -275,6 +283,7 @@ CONFIG_DISABLE_OS_API=y
 CONFIG_USEC_PER_TICK=10000
 # CONFIG_SYSTEM_TIME64 is not set
 # CONFIG_CLOCK_MONOTONIC is not set
+# CONFIG_ARCH_HAVE_TIMEKEEPING is not set
 # CONFIG_JULIAN_TIME is not set
 CONFIG_START_YEAR=2010
 CONFIG_START_MONTH=3
@@ -287,6 +296,7 @@ CONFIG_PREALLOC_TIMERS=4
 #
 # Tasks and Scheduling
 #
+# CONFIG_SPINLOCK is not set
 # CONFIG_INIT_NONE is not set
 CONFIG_INIT_ENTRYPOINT=y
 # CONFIG_INIT_FILEPATH is not set
@@ -303,6 +313,8 @@ CONFIG_MAX_TASKS=16
 #
 # CONFIG_MUTEX_TYPES is not set
 CONFIG_NPTHREAD_KEYS=4
+# CONFIG_PTHREAD_CLEANUP is not set
+# CONFIG_CANCELLATION_POINTS is not set
 
 #
 # Performance Monitoring
@@ -367,6 +379,7 @@ CONFIG_PTHREAD_STACK_DEFAULT=2048
 CONFIG_DISABLE_POLL=y
 CONFIG_DEV_NULL=y
 # CONFIG_DEV_ZERO is not set
+# CONFIG_DEV_URANDOM is not set
 # CONFIG_DEV_LOOP is not set
 
 #
@@ -381,6 +394,9 @@ CONFIG_DEV_NULL=y
 # CONFIG_PWM is not set
 # CONFIG_ARCH_HAVE_I2CRESET is not set
 # CONFIG_I2C is not set
+# CONFIG_ARCH_HAVE_SPI_CRCGENERATION is not set
+# CONFIG_ARCH_HAVE_SPI_CS_CONTROL is not set
+# CONFIG_ARCH_HAVE_SPI_BITORDER is not set
 # CONFIG_SPI is not set
 # CONFIG_I2S is not set
 
@@ -388,6 +404,7 @@ CONFIG_DEV_NULL=y
 # Timer Driver Support
 #
 # CONFIG_TIMER is not set
+# CONFIG_ONESHOT is not set
 # CONFIG_RTC is not set
 # CONFIG_WATCHDOG is not set
 # CONFIG_ANALOG is not set
@@ -395,7 +412,12 @@ CONFIG_DEV_NULL=y
 # CONFIG_VIDEO_DEVICES is not set
 # CONFIG_BCH is not set
 # CONFIG_INPUT is not set
+
+#
+# IO Expander/GPIO Support
+#
 # CONFIG_IOEXPANDER is not set
+# CONFIG_DEV_GPIO is not set
 
 #
 # LCD Driver Support
@@ -467,9 +489,12 @@ CONFIG_UART_2STOP=0
 # CONFIG_UART_IFLOWCONTROL is not set
 # CONFIG_UART_OFLOWCONTROL is not set
 # CONFIG_UART_DMA is not set
+# CONFIG_PSEUDOTERM is not set
 # CONFIG_USBDEV is not set
 # CONFIG_USBHOST is not set
+# CONFIG_HAVE_USBTRACE is not set
 # CONFIG_DRIVERS_WIRELESS is not set
+# CONFIG_DRIVERS_CONTACTLESS is not set
 
 #
 # System Logging
@@ -483,6 +508,7 @@ CONFIG_SYSLOG_SERIAL_CONSOLE=y
 CONFIG_SYSLOG_CONSOLE=y
 # CONFIG_SYSLOG_NONE is not set
 # CONFIG_SYSLOG_FILE is not set
+# CONFIG_SYSLOG_CHARDEV is not set
 
 #
 # Networking Support
@@ -506,6 +532,7 @@ CONFIG_SYSLOG_CONSOLE=y
 # CONFIG_DISABLE_MOUNTPOINT is not set
 # CONFIG_FS_AUTOMOUNTER is not set
 # CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
+# CONFIG_PSEUDOFS_SOFTLINKS is not set
 CONFIG_FS_READABLE=y
 CONFIG_FS_WRITABLE=y
 # CONFIG_FS_NAMED_SEMAPHORES is not set
@@ -566,36 +593,97 @@ CONFIG_MM_REGIONS=1
 #
 # Standard C Library Options
 #
+
+#
+# Standard C I/O
+#
+# CONFIG_STDIO_DISABLE_BUFFERING is not set
 CONFIG_STDIO_BUFFER_SIZE=64
 CONFIG_STDIO_LINEBUFFER=y
 CONFIG_NUNGET_CHARS=2
-CONFIG_LIB_HOMEDIR="/"
-# CONFIG_LIBM is not set
 # CONFIG_NOPRINTF_FIELDWIDTH is not set
 # CONFIG_LIBC_FLOATINGPOINT is not set
 CONFIG_LIBC_LONG_LONG=y
-# CONFIG_LIBC_IOCTL_VARIADIC is not set
-CONFIG_LIB_RAND_ORDER=1
+# CONFIG_LIBC_SCANSET is not set
 # CONFIG_EOL_IS_CR is not set
 # CONFIG_EOL_IS_LF is not set
 # CONFIG_EOL_IS_BOTH_CRLF is not set
 CONFIG_EOL_IS_EITHER_CRLF=y
+# CONFIG_MEMCPY_VIK is not set
+# CONFIG_LIBM is not set
+
+#
+# Architecture-Specific Support
+#
+CONFIG_ARCH_LOWPUTC=y
+# CONFIG_ARCH_ROMGETC is not set
+# CONFIG_LIBC_ARCH_MEMCPY is not set
+# CONFIG_LIBC_ARCH_MEMCMP is not set
+# CONFIG_LIBC_ARCH_MEMMOVE is not set
+# CONFIG_LIBC_ARCH_MEMSET is not set
+# CONFIG_LIBC_ARCH_STRCHR is not set
+# CONFIG_LIBC_ARCH_STRCMP is not set
+# CONFIG_LIBC_ARCH_STRCPY is not set
+# CONFIG_LIBC_ARCH_STRNCPY is not set
+# CONFIG_LIBC_ARCH_STRLEN is not set
+# CONFIG_LIBC_ARCH_STRNLEN is not set
+# CONFIG_LIBC_ARCH_ELF is not set
+
+#
+# stdlib Options
+#
+CONFIG_LIB_RAND_ORDER=1
+CONFIG_LIB_HOMEDIR="/"
+CONFIG_LIBC_TMPDIR="/tmp"
+CONFIG_LIBC_MAX_TMPFILE=32
+
+#
+# Program Execution Options
+#
 # CONFIG_LIBC_EXECFUNCS is not set
 CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=1024
 CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=2048
+
+#
+# errno Decode Support
+#
 # CONFIG_LIBC_STRERROR is not set
 # CONFIG_LIBC_PERROR_STDOUT is not set
-CONFIG_LIBC_TMPDIR="/tmp"
-CONFIG_LIBC_MAX_TMPFILE=32
-CONFIG_ARCH_LOWPUTC=y
+
+#
+# memcpy/memset Options
+#
+# CONFIG_MEMSET_OPTSPEED is not set
+# CONFIG_LIBC_DLLFCN is not set
+# CONFIG_LIBC_MODLIB is not set
+# CONFIG_LIBC_WCHAR is not set
+# CONFIG_LIBC_LOCALE is not set
+
+#
+# Time/Time Zone Support
+#
 # CONFIG_LIBC_LOCALTIME is not set
 # CONFIG_TIME_EXTENDED is not set
-CONFIG_LIB_SENDFILE_BUFSIZE=512
-# CONFIG_ARCH_ROMGETC is not set
 CONFIG_ARCH_HAVE_TLS=y
+
+#
+# Thread Local Storage (TLS)
+#
 # CONFIG_TLS is not set
+
+#
+# Network-Related Options
+#
+# CONFIG_LIBC_IPv4_ADDRCONV is not set
+# CONFIG_LIBC_IPv6_ADDRCONV is not set
 # CONFIG_LIBC_NETDB is not set
+
+#
+# NETDB Support
+#
 # CONFIG_NETDB_HOSTFILE is not set
+# CONFIG_LIBC_IOCTL_VARIADIC is not set
+CONFIG_LIB_SENDFILE_BUFSIZE=512
 
 #
 # Non-standard Library Support
@@ -603,6 +691,7 @@ CONFIG_ARCH_HAVE_TLS=y
 # CONFIG_LIB_CRC64_FAST is not set
 # CONFIG_LIB_KBDCODEC is not set
 # CONFIG_LIB_SLCDCODEC is not set
+# CONFIG_LIB_HEX2BIN is not set
 
 #
 # Basic CXX Support
@@ -621,9 +710,10 @@ CONFIG_ARCH_HAVE_TLS=y
 #
 # Examples
 #
+# CONFIG_EXAMPLES_BUTTONS is not set
+# CONFIG_EXAMPLES_CCTYPE is not set
 # CONFIG_EXAMPLES_CHAT is not set
 # CONFIG_EXAMPLES_CONFIGDATA is not set
-# CONFIG_EXAMPLES_CPUHOG is not set
 # CONFIG_EXAMPLES_DHCPD is not set
 # CONFIG_EXAMPLES_ELF is not set
 # CONFIG_EXAMPLES_FSTEST is not set
@@ -650,10 +740,9 @@ CONFIG_EXAMPLES_NSH=y
 # CONFIG_EXAMPLES_NXTEXT is not set
 # CONFIG_EXAMPLES_OSTEST is not set
 # CONFIG_EXAMPLES_PCA9635 is not set
-# CONFIG_EXAMPLES_PIPE is not set
-# CONFIG_EXAMPLES_POLL is not set
 # CONFIG_EXAMPLES_POSIXSPAWN is not set
 # CONFIG_EXAMPLES_PPPD is not set
+# CONFIG_EXAMPLES_RFID_READUID is not set
 # CONFIG_EXAMPLES_RGBLED is not set
 # CONFIG_EXAMPLES_SENDMAIL is not set
 # CONFIG_EXAMPLES_SERIALBLASTER is not set
@@ -662,12 +751,12 @@ CONFIG_EXAMPLES_NSH=y
 # CONFIG_EXAMPLES_SLCD is not set
 # CONFIG_EXAMPLES_SMART is not set
 # CONFIG_EXAMPLES_SMP is not set
+# CONFIG_EXAMPLES_STAT is not set
 # CONFIG_EXAMPLES_TCPECHO is not set
 # CONFIG_EXAMPLES_TELNETD is not set
 # CONFIG_EXAMPLES_TIFF is not set
 # CONFIG_EXAMPLES_TOUCHSCREEN is not set
 # CONFIG_EXAMPLES_USBSERIAL is not set
-# CONFIG_EXAMPLES_USBTERM is not set
 # CONFIG_EXAMPLES_WATCHDOG is not set
 # CONFIG_EXAMPLES_WEBSERVER is not set
 
@@ -694,6 +783,7 @@ CONFIG_EXAMPLES_NSH=y
 # CONFIG_INTERPRETERS_BAS is not set
 # CONFIG_INTERPRETERS_FICL is not set
 # CONFIG_INTERPRETERS_MICROPYTHON is not set
+# CONFIG_INTERPRETERS_MINIBASIC is not set
 # CONFIG_INTERPRETERS_PCODE is not set
 
 #
@@ -759,12 +849,12 @@ CONFIG_NSH_DISABLE_LOSMART=y
 # CONFIG_NSH_DISABLE_MB is not set
 # CONFIG_NSH_DISABLE_MKDIR is not set
 # CONFIG_NSH_DISABLE_MKFATFS is not set
-# CONFIG_NSH_DISABLE_MKFIFO is not set
 # CONFIG_NSH_DISABLE_MKRD is not set
 # CONFIG_NSH_DISABLE_MH is not set
 # CONFIG_NSH_DISABLE_MOUNT is not set
 # CONFIG_NSH_DISABLE_MV is not set
 # CONFIG_NSH_DISABLE_MW is not set
+CONFIG_NSH_DISABLE_PRINTF=y
 # CONFIG_NSH_DISABLE_PS is not set
 # CONFIG_NSH_DISABLE_PUT is not set
 # CONFIG_NSH_DISABLE_PWD is not set
@@ -781,11 +871,13 @@ CONFIG_NSH_DISABLE_LOSMART=y
 # CONFIG_NSH_DISABLE_USLEEP is not set
 # CONFIG_NSH_DISABLE_WGET is not set
 # CONFIG_NSH_DISABLE_XD is not set
+CONFIG_NSH_MMCSDMINOR=0
 
 #
 # Configure Command Options
 #
 # CONFIG_NSH_CMDOPT_DF_H is not set
+# CONFIG_NSH_CMDOPT_DD_STATS is not set
 CONFIG_NSH_CODECS_BUFSIZE=128
 # CONFIG_NSH_CMDOPT_HEXDUMP is not set
 CONFIG_NSH_FILEIOSIZE=512
@@ -821,7 +913,7 @@ CONFIG_NSH_ARCHINIT=y
 # CONFIG_SYSTEM_CLE is not set
 # CONFIG_SYSTEM_CUTERM is not set
 # CONFIG_SYSTEM_FREE is not set
-# CONFIG_LIB_HEX2BIN is not set
+# CONFIG_SYSTEM_HEX2BIN is not set
 # CONFIG_SYSTEM_HEXED is not set
 # CONFIG_SYSTEM_INSTALL is not set
 # CONFIG_SYSTEM_RAMTEST is not set
@@ -831,6 +923,7 @@ CONFIG_READLINE_ECHO=y
 # CONFIG_READLINE_TABCOMPLETION is not set
 # CONFIG_READLINE_CMD_HISTORY is not set
 # CONFIG_SYSTEM_SUDOKU is not set
+# CONFIG_SYSTEM_TEE is not set
 # CONFIG_SYSTEM_UBLOXMODEM is not set
 # CONFIG_SYSTEM_VI is not set
 # CONFIG_SYSTEM_ZMODEM is not set

configs/ea3131/pgnsh/defconfig

@@ -12,8 +12,10 @@
 # CONFIG_HOST_OSX is not set
 CONFIG_HOST_WINDOWS=y
 # CONFIG_HOST_OTHER is not set
+CONFIG_TOOLCHAIN_WINDOWS=y
 # CONFIG_WINDOWS_NATIVE is not set
 CONFIG_WINDOWS_CYGWIN=y
+# CONFIG_WINDOWS_UBUNTU is not set
 # CONFIG_WINDOWS_MSYS is not set
 # CONFIG_WINDOWS_OTHER is not set
 
@@ -67,9 +69,12 @@ CONFIG_ARCH_ARM=y
 # CONFIG_ARCH_AVR is not set
 # CONFIG_ARCH_HC is not set
 # CONFIG_ARCH_MIPS is not set
+# CONFIG_ARCH_MISOC is not set
 # CONFIG_ARCH_RENESAS is not set
+# CONFIG_ARCH_RISCV is not set
 # CONFIG_ARCH_SIM is not set
 # CONFIG_ARCH_X86 is not set
+# CONFIG_ARCH_XTENSA is not set
 # CONFIG_ARCH_Z16 is not set
 # CONFIG_ARCH_Z80 is not set
 CONFIG_ARCH="arm"
@@ -109,7 +114,9 @@ CONFIG_ARCH_CHIP_LPC31XX=y
 CONFIG_ARCH_ARM926EJS=y
 # CONFIG_ARCH_ARM920T is not set
 # CONFIG_ARCH_CORTEXM0 is not set
+# CONFIG_ARCH_CORTEXM23 is not set
 # CONFIG_ARCH_CORTEXM3 is not set
+# CONFIG_ARCH_CORTEXM33 is not set
 # CONFIG_ARCH_CORTEXM4 is not set
 # CONFIG_ARCH_CORTEXM7 is not set
 # CONFIG_ARCH_CORTEXA5 is not set
@@ -217,6 +224,7 @@ CONFIG_ARCH_STACKDUMP=y
 # CONFIG_ARCH_IDLE_CUSTOM is not set
 # CONFIG_ARCH_HAVE_RAMFUNCS is not set
 # CONFIG_ARCH_HAVE_RAMVECTORS is not set
+# CONFIG_ARCH_MINIMAL_VECTORTABLE is not set
 
 #
 # Board Settings
@@ -263,9 +271,6 @@ CONFIG_ARCH_HAVE_LEDS=y
 CONFIG_ARCH_LEDS=y
 CONFIG_ARCH_HAVE_BUTTONS=y
 # CONFIG_ARCH_BUTTONS is not set
-CONFIG_NSH_MMCSDMINOR=0
-CONFIG_NSH_MMCSDSLOTNO=0
-CONFIG_NSH_MMCSDSPIPORTNO=0
 
 #
 # Board-Specific Options
@@ -275,6 +280,7 @@ CONFIG_EA3131_PAGING_MOUNTPT="/mnt/pgsrc"
 CONFIG_EA3131_PAGING_BINOFFSET=0
 CONFIG_EA3131_PAGING_SDSLOT=0
 CONFIG_EA3131_PAGING_SPIPORT=0
+# CONFIG_BOARD_CRASHDUMP is not set
 CONFIG_LIB_BOARDCTL=y
 # CONFIG_BOARDCTL_UNIQUEID is not set
 # CONFIG_BOARDCTL_TSCTEST is not set
@@ -297,6 +303,7 @@ CONFIG_DISABLE_OS_API=y
 CONFIG_USEC_PER_TICK=10000
 # CONFIG_SYSTEM_TIME64 is not set
 # CONFIG_CLOCK_MONOTONIC is not set
+# CONFIG_ARCH_HAVE_TIMEKEEPING is not set
 # CONFIG_JULIAN_TIME is not set
 CONFIG_START_YEAR=2010
 CONFIG_START_MONTH=3
@@ -309,6 +316,7 @@ CONFIG_PREALLOC_TIMERS=4
 #
 # Tasks and Scheduling
 #
+# CONFIG_SPINLOCK is not set
 # CONFIG_INIT_NONE is not set
 CONFIG_INIT_ENTRYPOINT=y
 # CONFIG_INIT_FILEPATH is not set
@@ -325,6 +333,8 @@ CONFIG_MAX_TASKS=16
 #
 # CONFIG_MUTEX_TYPES is not set
 CONFIG_NPTHREAD_KEYS=4
+# CONFIG_PTHREAD_CLEANUP is not set
+# CONFIG_CANCELLATION_POINTS is not set
 
 #
 # Performance Monitoring
@@ -389,6 +399,7 @@ CONFIG_PTHREAD_STACK_DEFAULT=2048
 CONFIG_DISABLE_POLL=y
 CONFIG_DEV_NULL=y
 # CONFIG_DEV_ZERO is not set
+# CONFIG_DEV_URANDOM is not set
 # CONFIG_DEV_LOOP is not set
 
 #
@@ -403,22 +414,25 @@ CONFIG_DEV_NULL=y
 # CONFIG_PWM is not set
 # CONFIG_ARCH_HAVE_I2CRESET is not set
 # CONFIG_I2C is not set
+# CONFIG_ARCH_HAVE_SPI_CRCGENERATION is not set
+# CONFIG_ARCH_HAVE_SPI_CS_CONTROL is not set
+# CONFIG_ARCH_HAVE_SPI_BITORDER is not set
 CONFIG_SPI=y
 # CONFIG_SPI_SLAVE is not set
 CONFIG_SPI_EXCHANGE=y
 # CONFIG_SPI_CMDDATA is not set
 CONFIG_SPI_CALLBACK=y
-# CONFIG_SPI_BITBANG is not set
 # CONFIG_SPI_HWFEATURES is not set
-# CONFIG_SPI_CRCGENERATION is not set
-# CONFIG_SPI_CS_CONTROL is not set
 # CONFIG_SPI_CS_DELAY_CONTROL is not set
+# CONFIG_SPI_DRIVER is not set
+# CONFIG_SPI_BITBANG is not set
 # CONFIG_I2S is not set
 
 #
 # Timer Driver Support
 #
 # CONFIG_TIMER is not set
+# CONFIG_ONESHOT is not set
 # CONFIG_RTC is not set
 # CONFIG_WATCHDOG is not set
 # CONFIG_ANALOG is not set
@@ -426,7 +440,12 @@ CONFIG_SPI_CALLBACK=y
 # CONFIG_VIDEO_DEVICES is not set
 # CONFIG_BCH is not set
 # CONFIG_INPUT is not set
+
+#
+# IO Expander/GPIO Support
+#
 # CONFIG_IOEXPANDER is not set
+# CONFIG_DEV_GPIO is not set
 
 #
 # LCD Driver Support
@@ -451,6 +470,7 @@ CONFIG_MMCSD_SPI=y
 CONFIG_MMCSD_SPICLOCK=20000000
 CONFIG_MMCSD_SPIMODE=0
 # CONFIG_ARCH_HAVE_SDIO is not set
+# CONFIG_SDIO_DMA is not set
 # CONFIG_ARCH_HAVE_SDIOWAIT_WRCOMPLETE is not set
 # CONFIG_MODEM is not set
 CONFIG_MTD=y
@@ -480,6 +500,7 @@ CONFIG_M25P_SPIFREQUENCY=20000000
 CONFIG_M25P_MANUFACTURER=0x20
 CONFIG_M25P_MEMORY_TYPE=0x20
 # CONFIG_M25P_SUBSECTOR_ERASE is not set
+# CONFIG_MTD_MX25L is not set
 # CONFIG_MTD_S25FL1 is not set
 # CONFIG_MTD_N25QXXX is not set
 # CONFIG_MTD_SMART is not set
@@ -543,9 +564,12 @@ CONFIG_UART_2STOP=0
 # CONFIG_UART_IFLOWCONTROL is not set
 # CONFIG_UART_OFLOWCONTROL is not set
 # CONFIG_UART_DMA is not set
+# CONFIG_PSEUDOTERM is not set
 # CONFIG_USBDEV is not set
 # CONFIG_USBHOST is not set
+# CONFIG_HAVE_USBTRACE is not set
 # CONFIG_DRIVERS_WIRELESS is not set
+# CONFIG_DRIVERS_CONTACTLESS is not set
 
 #
 # System Logging
@@ -559,6 +583,7 @@ CONFIG_SYSLOG_SERIAL_CONSOLE=y
 CONFIG_SYSLOG_CONSOLE=y
 # CONFIG_SYSLOG_NONE is not set
 # CONFIG_SYSLOG_FILE is not set
+# CONFIG_SYSLOG_CHARDEV is not set
 
 #
 # Networking Support
@@ -582,6 +607,7 @@ CONFIG_SYSLOG_CONSOLE=y
 # CONFIG_DISABLE_MOUNTPOINT is not set
 # CONFIG_FS_AUTOMOUNTER is not set
 # CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
+# CONFIG_PSEUDOFS_SOFTLINKS is not set
 CONFIG_FS_READABLE=y
 CONFIG_FS_WRITABLE=y
 # CONFIG_FS_NAMED_SEMAPHORES is not set
@@ -642,36 +668,97 @@ CONFIG_MM_REGIONS=1
 #
 # Standard C Library Options
 #
+
+#
+# Standard C I/O
+#
+# CONFIG_STDIO_DISABLE_BUFFERING is not set
 CONFIG_STDIO_BUFFER_SIZE=64
 CONFIG_STDIO_LINEBUFFER=y
 CONFIG_NUNGET_CHARS=2
-CONFIG_LIB_HOMEDIR="/"
-# CONFIG_LIBM is not set
 # CONFIG_NOPRINTF_FIELDWIDTH is not set
 # CONFIG_LIBC_FLOATINGPOINT is not set
 CONFIG_LIBC_LONG_LONG=y
-# CONFIG_LIBC_IOCTL_VARIADIC is not set
-CONFIG_LIB_RAND_ORDER=1
+# CONFIG_LIBC_SCANSET is not set
 # CONFIG_EOL_IS_CR is not set
 # CONFIG_EOL_IS_LF is not set
 # CONFIG_EOL_IS_BOTH_CRLF is not set
 CONFIG_EOL_IS_EITHER_CRLF=y
+# CONFIG_MEMCPY_VIK is not set
+# CONFIG_LIBM is not set
+
+#
+# Architecture-Specific Support
+#
+CONFIG_ARCH_LOWPUTC=y
+# CONFIG_ARCH_ROMGETC is not set
+# CONFIG_LIBC_ARCH_MEMCPY is not set
+# CONFIG_LIBC_ARCH_MEMCMP is not set
+# CONFIG_LIBC_ARCH_MEMMOVE is not set
+# CONFIG_LIBC_ARCH_MEMSET is not set
+# CONFIG_LIBC_ARCH_STRCHR is not set
+# CONFIG_LIBC_ARCH_STRCMP is not set
+# CONFIG_LIBC_ARCH_STRCPY is not set
+# CONFIG_LIBC_ARCH_STRNCPY is not set
+# CONFIG_LIBC_ARCH_STRLEN is not set
+# CONFIG_LIBC_ARCH_STRNLEN is not set
+# CONFIG_LIBC_ARCH_ELF is not set
+
+#
+# stdlib Options
+#
+CONFIG_LIB_RAND_ORDER=1
+CONFIG_LIB_HOMEDIR="/"
+CONFIG_LIBC_TMPDIR="/tmp"
+CONFIG_LIBC_MAX_TMPFILE=32
+
+#
+# Program Execution Options
+#
 # CONFIG_LIBC_EXECFUNCS is not set
 CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=1024
 CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=2048
+
+#
+# errno Decode Support
+#
 # CONFIG_LIBC_STRERROR is not set
 # CONFIG_LIBC_PERROR_STDOUT is not set
-CONFIG_LIBC_TMPDIR="/tmp"
-CONFIG_LIBC_MAX_TMPFILE=32
-CONFIG_ARCH_LOWPUTC=y
+
+#
+# memcpy/memset Options
+#
+# CONFIG_MEMSET_OPTSPEED is not set
+# CONFIG_LIBC_DLLFCN is not set
+# CONFIG_LIBC_MODLIB is not set
+# CONFIG_LIBC_WCHAR is not set
+# CONFIG_LIBC_LOCALE is not set
+
+#
+# Time/Time Zone Support
+#
 # CONFIG_LIBC_LOCALTIME is not set
 # CONFIG_TIME_EXTENDED is not set
-CONFIG_LIB_SENDFILE_BUFSIZE=512
-# CONFIG_ARCH_ROMGETC is not set
 CONFIG_ARCH_HAVE_TLS=y
+
+#
+# Thread Local Storage (TLS)
+#
 # CONFIG_TLS is not set
+
+#
+# Network-Related Options
+#
+# CONFIG_LIBC_IPv4_ADDRCONV is not set
+# CONFIG_LIBC_IPv6_ADDRCONV is not set
 # CONFIG_LIBC_NETDB is not set
+
+#
+# NETDB Support
+#
 # CONFIG_NETDB_HOSTFILE is not set
+# CONFIG_LIBC_IOCTL_VARIADIC is not set
+CONFIG_LIB_SENDFILE_BUFSIZE=512
 
 #
 # Non-standard Library Support
@@ -679,6 +766,7 @@ CONFIG_ARCH_HAVE_TLS=y
 # CONFIG_LIB_CRC64_FAST is not set
 # CONFIG_LIB_KBDCODEC is not set
 # CONFIG_LIB_SLCDCODEC is not set
+# CONFIG_LIB_HEX2BIN is not set
 
 #
 # Basic CXX Support
@@ -697,9 +785,10 @@ CONFIG_ARCH_HAVE_TLS=y
 #
 # Examples
 #
+# CONFIG_EXAMPLES_BUTTONS is not set
+# CONFIG_EXAMPLES_CCTYPE is not set
 # CONFIG_EXAMPLES_CHAT is not set
 # CONFIG_EXAMPLES_CONFIGDATA is not set
-# CONFIG_EXAMPLES_CPUHOG is not set
 # CONFIG_EXAMPLES_DHCPD is not set
 # CONFIG_EXAMPLES_ELF is not set
 # CONFIG_EXAMPLES_FSTEST is not set
@@ -726,10 +815,9 @@ CONFIG_EXAMPLES_NSH=y
 # CONFIG_EXAMPLES_NXTEXT is not set
 # CONFIG_EXAMPLES_OSTEST is not set
 # CONFIG_EXAMPLES_PCA9635 is not set
-# CONFIG_EXAMPLES_PIPE is not set
-# CONFIG_EXAMPLES_POLL is not set
 # CONFIG_EXAMPLES_POSIXSPAWN is not set
 # CONFIG_EXAMPLES_PPPD is not set
+# CONFIG_EXAMPLES_RFID_READUID is not set
 # CONFIG_EXAMPLES_RGBLED is not set
 # CONFIG_EXAMPLES_SENDMAIL is not set
 # CONFIG_EXAMPLES_SERIALBLASTER is not set
@@ -738,12 +826,12 @@ CONFIG_EXAMPLES_NSH=y
 # CONFIG_EXAMPLES_SLCD is not set
 # CONFIG_EXAMPLES_SMART is not set
 # CONFIG_EXAMPLES_SMP is not set
+# CONFIG_EXAMPLES_STAT is not set
 # CONFIG_EXAMPLES_TCPECHO is not set
 # CONFIG_EXAMPLES_TELNETD is not set
 # CONFIG_EXAMPLES_TIFF is not set
 # CONFIG_EXAMPLES_TOUCHSCREEN is not set
 # CONFIG_EXAMPLES_USBSERIAL is not set
-# CONFIG_EXAMPLES_USBTERM is not set
 # CONFIG_EXAMPLES_WATCHDOG is not set
 # CONFIG_EXAMPLES_WEBSERVER is not set
 
@@ -771,6 +859,7 @@ CONFIG_EXAMPLES_NSH=y
 # CONFIG_INTERPRETERS_BAS is not set
 # CONFIG_INTERPRETERS_FICL is not set
 # CONFIG_INTERPRETERS_MICROPYTHON is not set
+# CONFIG_INTERPRETERS_MINIBASIC is not set
 # CONFIG_INTERPRETERS_PCODE is not set
 
 #
@@ -836,12 +925,12 @@ CONFIG_NSH_DISABLE_LOSMART=y
 # CONFIG_NSH_DISABLE_MB is not set
 # CONFIG_NSH_DISABLE_MKDIR is not set
 # CONFIG_NSH_DISABLE_MKFATFS is not set
-# CONFIG_NSH_DISABLE_MKFIFO is not set
 # CONFIG_NSH_DISABLE_MKRD is not set
 # CONFIG_NSH_DISABLE_MH is not set
 # CONFIG_NSH_DISABLE_MOUNT is not set
 # CONFIG_NSH_DISABLE_MV is not set
 # CONFIG_NSH_DISABLE_MW is not set
+CONFIG_NSH_DISABLE_PRINTF=y
 # CONFIG_NSH_DISABLE_PS is not set
 # CONFIG_NSH_DISABLE_PUT is not set
 # CONFIG_NSH_DISABLE_PWD is not set
@@ -858,11 +947,15 @@ CONFIG_NSH_DISABLE_LOSMART=y
 # CONFIG_NSH_DISABLE_USLEEP is not set
 # CONFIG_NSH_DISABLE_WGET is not set
 # CONFIG_NSH_DISABLE_XD is not set
+CONFIG_NSH_MMCSDMINOR=0
+CONFIG_NSH_MMCSDSLOTNO=0
+CONFIG_NSH_MMCSDSPIPORTNO=0
 
 #
 # Configure Command Options
 #
 CONFIG_NSH_CMDOPT_DF_H=y
+# CONFIG_NSH_CMDOPT_DD_STATS is not set
 CONFIG_NSH_CODECS_BUFSIZE=128
 CONFIG_NSH_CMDOPT_HEXDUMP=y
 CONFIG_NSH_FILEIOSIZE=512
@@ -898,7 +991,7 @@ CONFIG_NSH_ARCHINIT=y
 # CONFIG_SYSTEM_CLE is not set
 # CONFIG_SYSTEM_CUTERM is not set
 # CONFIG_SYSTEM_FREE is not set
-# CONFIG_LIB_HEX2BIN is not set
+# CONFIG_SYSTEM_HEX2BIN is not set
 # CONFIG_SYSTEM_HEXED is not set
 # CONFIG_SYSTEM_INSTALL is not set
 # CONFIG_SYSTEM_RAMTEST is not set
@@ -908,6 +1001,7 @@ CONFIG_READLINE_ECHO=y
 # CONFIG_READLINE_TABCOMPLETION is not set
 # CONFIG_READLINE_CMD_HISTORY is not set
 # CONFIG_SYSTEM_SUDOKU is not set
+# CONFIG_SYSTEM_TEE is not set
 # CONFIG_SYSTEM_UBLOXMODEM is not set
 # CONFIG_SYSTEM_VI is not set
 # CONFIG_SYSTEM_ZMODEM is not set

configs/ea3131/usbserial/defconfig

@@ -12,8 +12,10 @@
 # CONFIG_HOST_OSX is not set
 CONFIG_HOST_WINDOWS=y
 # CONFIG_HOST_OTHER is not set
+CONFIG_TOOLCHAIN_WINDOWS=y
 # CONFIG_WINDOWS_NATIVE is not set
 CONFIG_WINDOWS_CYGWIN=y
+# CONFIG_WINDOWS_UBUNTU is not set
 # CONFIG_WINDOWS_MSYS is not set
 # CONFIG_WINDOWS_OTHER is not set
 
@@ -64,9 +66,12 @@ CONFIG_ARCH_ARM=y
 # CONFIG_ARCH_AVR is not set
 # CONFIG_ARCH_HC is not set
 # CONFIG_ARCH_MIPS is not set
+# CONFIG_ARCH_MISOC is not set
 # CONFIG_ARCH_RENESAS is not set
+# CONFIG_ARCH_RISCV is not set
 # CONFIG_ARCH_SIM is not set
 # CONFIG_ARCH_X86 is not set
+# CONFIG_ARCH_XTENSA is not set
 # CONFIG_ARCH_Z16 is not set
 # CONFIG_ARCH_Z80 is not set
 CONFIG_ARCH="arm"
@@ -106,7 +111,9 @@ CONFIG_ARCH_CHIP_LPC31XX=y
 CONFIG_ARCH_ARM926EJS=y
 # CONFIG_ARCH_ARM920T is not set
 # CONFIG_ARCH_CORTEXM0 is not set
+# CONFIG_ARCH_CORTEXM23 is not set
 # CONFIG_ARCH_CORTEXM3 is not set
+# CONFIG_ARCH_CORTEXM33 is not set
 # CONFIG_ARCH_CORTEXM4 is not set
 # CONFIG_ARCH_CORTEXM7 is not set
 # CONFIG_ARCH_CORTEXA5 is not set
@@ -210,6 +217,7 @@ CONFIG_ARCH_STACKDUMP=y
 # CONFIG_ARCH_IDLE_CUSTOM is not set
 # CONFIG_ARCH_HAVE_RAMFUNCS is not set
 # CONFIG_ARCH_HAVE_RAMVECTORS is not set
+# CONFIG_ARCH_MINIMAL_VECTORTABLE is not set
 
 #
 # Board Settings
@@ -260,6 +268,7 @@ CONFIG_ARCH_HAVE_BUTTONS=y
 #
 # Board-Specific Options
 #
+# CONFIG_BOARD_CRASHDUMP is not set
 CONFIG_LIB_BOARDCTL=y
 # CONFIG_BOARDCTL_UNIQUEID is not set
 CONFIG_BOARDCTL_USBDEVCTRL=y
@@ -283,6 +292,7 @@ CONFIG_DISABLE_ENVIRON=y
 CONFIG_USEC_PER_TICK=10000
 # CONFIG_SYSTEM_TIME64 is not set
 # CONFIG_CLOCK_MONOTONIC is not set
+# CONFIG_ARCH_HAVE_TIMEKEEPING is not set
 # CONFIG_JULIAN_TIME is not set
 CONFIG_START_YEAR=2010
 CONFIG_START_MONTH=3
@@ -295,6 +305,7 @@ CONFIG_PREALLOC_TIMERS=4
 #
 # Tasks and Scheduling
 #
+# CONFIG_SPINLOCK is not set
 # CONFIG_INIT_NONE is not set
 CONFIG_INIT_ENTRYPOINT=y
 # CONFIG_INIT_FILEPATH is not set
@@ -311,6 +322,8 @@ CONFIG_MAX_TASKS=16
 #
 # CONFIG_MUTEX_TYPES is not set
 CONFIG_NPTHREAD_KEYS=4
+# CONFIG_PTHREAD_CLEANUP is not set
+# CONFIG_CANCELLATION_POINTS is not set
 
 #
 # Performance Monitoring
@@ -380,6 +393,7 @@ CONFIG_PTHREAD_STACK_DEFAULT=2048
 CONFIG_DISABLE_POLL=y
 CONFIG_DEV_NULL=y
 # CONFIG_DEV_ZERO is not set
+# CONFIG_DEV_URANDOM is not set
 # CONFIG_DEV_LOOP is not set
 
 #
@@ -394,6 +408,9 @@ CONFIG_DEV_NULL=y
 # CONFIG_PWM is not set
 # CONFIG_ARCH_HAVE_I2CRESET is not set
 # CONFIG_I2C is not set
+# CONFIG_ARCH_HAVE_SPI_CRCGENERATION is not set
+# CONFIG_ARCH_HAVE_SPI_CS_CONTROL is not set
+# CONFIG_ARCH_HAVE_SPI_BITORDER is not set
 # CONFIG_SPI is not set
 # CONFIG_I2S is not set
 
@@ -401,6 +418,7 @@ CONFIG_DEV_NULL=y
 # Timer Driver Support
 #
 # CONFIG_TIMER is not set
+# CONFIG_ONESHOT is not set
 # CONFIG_RTC is not set
 # CONFIG_WATCHDOG is not set
 # CONFIG_ANALOG is not set
@@ -408,7 +426,12 @@ CONFIG_DEV_NULL=y
 # CONFIG_VIDEO_DEVICES is not set
 # CONFIG_BCH is not set
 # CONFIG_INPUT is not set
+
+#
+# IO Expander/GPIO Support
+#
 # CONFIG_IOEXPANDER is not set
+# CONFIG_DEV_GPIO is not set
 
 #
 # LCD Driver Support
@@ -479,6 +502,7 @@ CONFIG_UART_2STOP=0
 # CONFIG_UART_IFLOWCONTROL is not set
 # CONFIG_UART_OFLOWCONTROL is not set
 # CONFIG_UART_DMA is not set
+# CONFIG_PSEUDOTERM is not set
 CONFIG_USBDEV=y
 
 #
@@ -518,7 +542,10 @@ CONFIG_PL2303_PRODUCTSTR="USBdev Serial"
 # CONFIG_USBMSC is not set
 # CONFIG_USBHOST is not set
 CONFIG_USBHOST_HAVE_ASYNCH=y
+CONFIG_HAVE_USBTRACE=y
+# CONFIG_USBMONITOR is not set
 # CONFIG_DRIVERS_WIRELESS is not set
+# CONFIG_DRIVERS_CONTACTLESS is not set
 
 #
 # System Logging
@@ -532,6 +559,7 @@ CONFIG_SYSLOG_SERIAL_CONSOLE=y
 CONFIG_SYSLOG_CONSOLE=y
 # CONFIG_SYSLOG_NONE is not set
 # CONFIG_SYSLOG_FILE is not set
+# CONFIG_SYSLOG_CHARDEV is not set
 
 #
 # Networking Support
@@ -555,6 +583,7 @@ CONFIG_SYSLOG_CONSOLE=y
 # CONFIG_DISABLE_MOUNTPOINT is not set
 # CONFIG_FS_AUTOMOUNTER is not set
 # CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
+# CONFIG_PSEUDOFS_SOFTLINKS is not set
 # CONFIG_FS_READABLE is not set
 # CONFIG_FS_WRITABLE is not set
 # CONFIG_FS_NAMED_SEMAPHORES is not set
@@ -608,38 +637,100 @@ CONFIG_MM_REGIONS=1
 #
 # Standard C Library Options
 #
+
+#
+# Standard C I/O
+#
+# CONFIG_STDIO_DISABLE_BUFFERING is not set
 CONFIG_STDIO_BUFFER_SIZE=64
 CONFIG_STDIO_LINEBUFFER=y
 CONFIG_NUNGET_CHARS=2
-# CONFIG_LIBM is not set
 # CONFIG_NOPRINTF_FIELDWIDTH is not set
 # CONFIG_LIBC_FLOATINGPOINT is not set
 CONFIG_LIBC_LONG_LONG=y
-# CONFIG_LIBC_IOCTL_VARIADIC is not set
-CONFIG_LIB_RAND_ORDER=1
+# CONFIG_LIBC_SCANSET is not set
 # CONFIG_EOL_IS_CR is not set
 # CONFIG_EOL_IS_LF is not set
 # CONFIG_EOL_IS_BOTH_CRLF is not set
 CONFIG_EOL_IS_EITHER_CRLF=y
+# CONFIG_MEMCPY_VIK is not set
+# CONFIG_LIBM is not set
+
+#
+# Architecture-Specific Support
+#
+CONFIG_ARCH_LOWPUTC=y
+# CONFIG_ARCH_ROMGETC is not set
+# CONFIG_LIBC_ARCH_MEMCPY is not set
+# CONFIG_LIBC_ARCH_MEMCMP is not set
+# CONFIG_LIBC_ARCH_MEMMOVE is not set
+# CONFIG_LIBC_ARCH_MEMSET is not set
+# CONFIG_LIBC_ARCH_STRCHR is not set
+# CONFIG_LIBC_ARCH_STRCMP is not set
+# CONFIG_LIBC_ARCH_STRCPY is not set
+# CONFIG_LIBC_ARCH_STRNCPY is not set
+# CONFIG_LIBC_ARCH_STRLEN is not set
+# CONFIG_LIBC_ARCH_STRNLEN is not set
+# CONFIG_LIBC_ARCH_ELF is not set
+
+#
+# stdlib Options
+#
+CONFIG_LIB_RAND_ORDER=1
+
+#
+# Program Execution Options
+#
 # CONFIG_LIBC_EXECFUNCS is not set
 CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=1024
 CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=2048
+
+#
+# errno Decode Support
+#
 # CONFIG_LIBC_STRERROR is not set
 # CONFIG_LIBC_PERROR_STDOUT is not set
-CONFIG_ARCH_LOWPUTC=y
+
+#
+# memcpy/memset Options
+#
+# CONFIG_MEMSET_OPTSPEED is not set
+# CONFIG_LIBC_DLLFCN is not set
+# CONFIG_LIBC_MODLIB is not set
+# CONFIG_LIBC_WCHAR is not set
+# CONFIG_LIBC_LOCALE is not set
+
+#
+# Time/Time Zone Support
+#
 # CONFIG_TIME_EXTENDED is not set
-CONFIG_LIB_SENDFILE_BUFSIZE=512
-# CONFIG_ARCH_ROMGETC is not set
 CONFIG_ARCH_HAVE_TLS=y
+
+#
+# Thread Local Storage (TLS)
+#
 # CONFIG_TLS is not set
+
+#
+# Network-Related Options
+#
+# CONFIG_LIBC_IPv4_ADDRCONV is not set
+# CONFIG_LIBC_IPv6_ADDRCONV is not set
 # CONFIG_LIBC_NETDB is not set
 
+#
+# NETDB Support
+#
+# CONFIG_LIBC_IOCTL_VARIADIC is not set
+CONFIG_LIB_SENDFILE_BUFSIZE=512
+
 #
 # Non-standard Library Support
 #
 # CONFIG_LIB_CRC64_FAST is not set
 # CONFIG_LIB_KBDCODEC is not set
 # CONFIG_LIB_SLCDCODEC is not set
+# CONFIG_LIB_HEX2BIN is not set
 
 #
 # Basic CXX Support
@@ -658,9 +749,10 @@ CONFIG_ARCH_HAVE_TLS=y
 #
 # Examples
 #
+# CONFIG_EXAMPLES_BUTTONS is not set
+# CONFIG_EXAMPLES_CCTYPE is not set
 # CONFIG_EXAMPLES_CHAT is not set
 # CONFIG_EXAMPLES_CONFIGDATA is not set
-# CONFIG_EXAMPLES_CPUHOG is not set
 # CONFIG_EXAMPLES_DHCPD is not set
 # CONFIG_EXAMPLES_ELF is not set
 # CONFIG_EXAMPLES_FTPC is not set
@@ -686,10 +778,9 @@ CONFIG_ARCH_HAVE_TLS=y
 # CONFIG_EXAMPLES_NXTEXT is not set
 # CONFIG_EXAMPLES_OSTEST is not set
 # CONFIG_EXAMPLES_PCA9635 is not set
-# CONFIG_EXAMPLES_PIPE is not set
-# CONFIG_EXAMPLES_POLL is not set
 # CONFIG_EXAMPLES_POSIXSPAWN is not set
 # CONFIG_EXAMPLES_PPPD is not set
+# CONFIG_EXAMPLES_RFID_READUID is not set
 # CONFIG_EXAMPLES_RGBLED is not set
 # CONFIG_EXAMPLES_SENDMAIL is not set
 # CONFIG_EXAMPLES_SERIALBLASTER is not set
@@ -698,6 +789,7 @@ CONFIG_ARCH_HAVE_TLS=y
 # CONFIG_EXAMPLES_SLCD is not set
 # CONFIG_EXAMPLES_SMART is not set
 # CONFIG_EXAMPLES_SMP is not set
+# CONFIG_EXAMPLES_STAT is not set
 # CONFIG_EXAMPLES_TCPECHO is not set
 # CONFIG_EXAMPLES_TELNETD is not set
 # CONFIG_EXAMPLES_TIFF is not set
@@ -709,7 +801,6 @@ CONFIG_EXAMPLES_USBSERIAL_BUFSIZE=512
 # CONFIG_EXAMPLES_USBSERIAL_TRACETRANSFERS is not set
 # CONFIG_EXAMPLES_USBSERIAL_TRACECONTROLLER is not set
 # CONFIG_EXAMPLES_USBSERIAL_TRACEINTERRUPTS is not set
-# CONFIG_EXAMPLES_USBTERM is not set
 # CONFIG_EXAMPLES_WATCHDOG is not set
 # CONFIG_EXAMPLES_WEBSERVER is not set
 
@@ -734,6 +825,7 @@ CONFIG_EXAMPLES_USBSERIAL_BUFSIZE=512
 #
 # CONFIG_INTERPRETERS_FICL is not set
 # CONFIG_INTERPRETERS_MICROPYTHON is not set
+# CONFIG_INTERPRETERS_MINIBASIC is not set
 # CONFIG_INTERPRETERS_PCODE is not set
 
 #
@@ -770,14 +862,14 @@ CONFIG_EXAMPLES_USBSERIAL_BUFSIZE=512
 # CONFIG_SYSTEM_CLE is not set
 # CONFIG_SYSTEM_CUTERM is not set
 # CONFIG_SYSTEM_FREE is not set
-# CONFIG_LIB_HEX2BIN is not set
+# CONFIG_SYSTEM_HEX2BIN is not set
 # CONFIG_SYSTEM_HEXED is not set
 # CONFIG_SYSTEM_INSTALL is not set
 # CONFIG_SYSTEM_RAMTEST is not set
 # CONFIG_READLINE_HAVE_EXTMATCH is not set
 # CONFIG_SYSTEM_READLINE is not set
 # CONFIG_SYSTEM_SUDOKU is not set
+# CONFIG_SYSTEM_TEE is not set
 # CONFIG_SYSTEM_UBLOXMODEM is not set
-# CONFIG_USBMONITOR is not set
 # CONFIG_SYSTEM_VI is not set
 # CONFIG_SYSTEM_ZMODEM is not set

configs/ea3152/ostest/defconfig

@@ -12,8 +12,10 @@
 # CONFIG_HOST_OSX is not set
 CONFIG_HOST_WINDOWS=y
 # CONFIG_HOST_OTHER is not set
+CONFIG_TOOLCHAIN_WINDOWS=y
 # CONFIG_WINDOWS_NATIVE is not set
 CONFIG_WINDOWS_CYGWIN=y
+# CONFIG_WINDOWS_UBUNTU is not set
 # CONFIG_WINDOWS_MSYS is not set
 # CONFIG_WINDOWS_OTHER is not set
 
@@ -64,9 +66,12 @@ CONFIG_ARCH_ARM=y
 # CONFIG_ARCH_AVR is not set
 # CONFIG_ARCH_HC is not set
 # CONFIG_ARCH_MIPS is not set
+# CONFIG_ARCH_MISOC is not set
 # CONFIG_ARCH_RENESAS is not set
+# CONFIG_ARCH_RISCV is not set
 # CONFIG_ARCH_SIM is not set
 # CONFIG_ARCH_X86 is not set
+# CONFIG_ARCH_XTENSA is not set
 # CONFIG_ARCH_Z16 is not set
 # CONFIG_ARCH_Z80 is not set
 CONFIG_ARCH="arm"
@@ -106,7 +111,9 @@ CONFIG_ARCH_CHIP_LPC31XX=y
 CONFIG_ARCH_ARM926EJS=y
 # CONFIG_ARCH_ARM920T is not set
 # CONFIG_ARCH_CORTEXM0 is not set
+# CONFIG_ARCH_CORTEXM23 is not set
 # CONFIG_ARCH_CORTEXM3 is not set
+# CONFIG_ARCH_CORTEXM33 is not set
 # CONFIG_ARCH_CORTEXM4 is not set
 # CONFIG_ARCH_CORTEXM7 is not set
 # CONFIG_ARCH_CORTEXA5 is not set
@@ -203,6 +210,7 @@ CONFIG_ARCH_STACKDUMP=y
 # CONFIG_ARCH_IDLE_CUSTOM is not set
 # CONFIG_ARCH_HAVE_RAMFUNCS is not set
 # CONFIG_ARCH_HAVE_RAMVECTORS is not set
+# CONFIG_ARCH_MINIMAL_VECTORTABLE is not set
 
 #
 # Board Settings
@@ -252,6 +260,7 @@ CONFIG_ARCH_HAVE_BUTTONS=y
 #
 # Board-Specific Options
 #
+# CONFIG_BOARD_CRASHDUMP is not set
 # CONFIG_LIB_BOARDCTL is not set
 
 #
@@ -270,6 +279,7 @@ CONFIG_DISABLE_ENVIRON=y
 CONFIG_USEC_PER_TICK=10000
 # CONFIG_SYSTEM_TIME64 is not set
 # CONFIG_CLOCK_MONOTONIC is not set
+# CONFIG_ARCH_HAVE_TIMEKEEPING is not set
 # CONFIG_JULIAN_TIME is not set
 CONFIG_START_YEAR=2009
 CONFIG_START_MONTH=12
@@ -282,6 +292,7 @@ CONFIG_PREALLOC_TIMERS=4
 #
 # Tasks and Scheduling
 #
+# CONFIG_SPINLOCK is not set
 # CONFIG_INIT_NONE is not set
 CONFIG_INIT_ENTRYPOINT=y
 # CONFIG_INIT_FILEPATH is not set
@@ -298,6 +309,8 @@ CONFIG_MAX_TASKS=16
 #
 # CONFIG_MUTEX_TYPES is not set
 CONFIG_NPTHREAD_KEYS=4
+# CONFIG_PTHREAD_CLEANUP is not set
+# CONFIG_CANCELLATION_POINTS is not set
 
 #
 # Performance Monitoring
@@ -362,6 +375,7 @@ CONFIG_PTHREAD_STACK_DEFAULT=2048
 CONFIG_DISABLE_POLL=y
 CONFIG_DEV_NULL=y
 # CONFIG_DEV_ZERO is not set
+# CONFIG_DEV_URANDOM is not set
 # CONFIG_DEV_LOOP is not set
 
 #
@@ -376,6 +390,9 @@ CONFIG_DEV_NULL=y
 # CONFIG_PWM is not set
 # CONFIG_ARCH_HAVE_I2CRESET is not set
 # CONFIG_I2C is not set
+# CONFIG_ARCH_HAVE_SPI_CRCGENERATION is not set
+# CONFIG_ARCH_HAVE_SPI_CS_CONTROL is not set
+# CONFIG_ARCH_HAVE_SPI_BITORDER is not set
 # CONFIG_SPI is not set
 # CONFIG_I2S is not set
 
@@ -383,6 +400,7 @@ CONFIG_DEV_NULL=y
 # Timer Driver Support
 #
 # CONFIG_TIMER is not set
+# CONFIG_ONESHOT is not set
 # CONFIG_RTC is not set
 # CONFIG_WATCHDOG is not set
 # CONFIG_ANALOG is not set
@@ -390,7 +408,12 @@ CONFIG_DEV_NULL=y
 # CONFIG_VIDEO_DEVICES is not set
 # CONFIG_BCH is not set
 # CONFIG_INPUT is not set
+
+#
+# IO Expander/GPIO Support
+#
 # CONFIG_IOEXPANDER is not set
+# CONFIG_DEV_GPIO is not set
 
 #
 # LCD Driver Support
@@ -461,9 +484,12 @@ CONFIG_UART_2STOP=0
 # CONFIG_UART_IFLOWCONTROL is not set
 # CONFIG_UART_OFLOWCONTROL is not set
 # CONFIG_UART_DMA is not set
+# CONFIG_PSEUDOTERM is not set
 # CONFIG_USBDEV is not set
 # CONFIG_USBHOST is not set
+# CONFIG_HAVE_USBTRACE is not set
 # CONFIG_DRIVERS_WIRELESS is not set
+# CONFIG_DRIVERS_CONTACTLESS is not set
 
 #
 # System Logging
@@ -477,6 +503,7 @@ CONFIG_SYSLOG_SERIAL_CONSOLE=y
 CONFIG_SYSLOG_CONSOLE=y
 # CONFIG_SYSLOG_NONE is not set
 # CONFIG_SYSLOG_FILE is not set
+# CONFIG_SYSLOG_CHARDEV is not set
 
 #
 # Networking Support
@@ -499,6 +526,7 @@ CONFIG_SYSLOG_CONSOLE=y
 #
 CONFIG_DISABLE_MOUNTPOINT=y
 # CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
+# CONFIG_PSEUDOFS_SOFTLINKS is not set
 # CONFIG_FS_READABLE is not set
 # CONFIG_FS_WRITABLE is not set
 # CONFIG_FS_NAMED_SEMAPHORES is not set
@@ -547,38 +575,100 @@ CONFIG_MM_REGIONS=1
 #
 # Standard C Library Options
 #
+
+#
+# Standard C I/O
+#
+# CONFIG_STDIO_DISABLE_BUFFERING is not set
 CONFIG_STDIO_BUFFER_SIZE=64
 CONFIG_STDIO_LINEBUFFER=y
 CONFIG_NUNGET_CHARS=2
-# CONFIG_LIBM is not set
 # CONFIG_NOPRINTF_FIELDWIDTH is not set
 # CONFIG_LIBC_FLOATINGPOINT is not set
 CONFIG_LIBC_LONG_LONG=y
-# CONFIG_LIBC_IOCTL_VARIADIC is not set
-CONFIG_LIB_RAND_ORDER=1
+# CONFIG_LIBC_SCANSET is not set
 # CONFIG_EOL_IS_CR is not set
 # CONFIG_EOL_IS_LF is not set
 # CONFIG_EOL_IS_BOTH_CRLF is not set
 CONFIG_EOL_IS_EITHER_CRLF=y
+# CONFIG_MEMCPY_VIK is not set
+# CONFIG_LIBM is not set
+
+#
+# Architecture-Specific Support
+#
+CONFIG_ARCH_LOWPUTC=y
+# CONFIG_ARCH_ROMGETC is not set
+# CONFIG_LIBC_ARCH_MEMCPY is not set
+# CONFIG_LIBC_ARCH_MEMCMP is not set
+# CONFIG_LIBC_ARCH_MEMMOVE is not set
+# CONFIG_LIBC_ARCH_MEMSET is not set
+# CONFIG_LIBC_ARCH_STRCHR is not set
+# CONFIG_LIBC_ARCH_STRCMP is not set
+# CONFIG_LIBC_ARCH_STRCPY is not set
+# CONFIG_LIBC_ARCH_STRNCPY is not set
+# CONFIG_LIBC_ARCH_STRLEN is not set
+# CONFIG_LIBC_ARCH_STRNLEN is not set
+# CONFIG_LIBC_ARCH_ELF is not set
+
+#
+# stdlib Options
+#
+CONFIG_LIB_RAND_ORDER=1
+
+#
+# Program Execution Options
+#
 # CONFIG_LIBC_EXECFUNCS is not set
 CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=1024
 CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=2048
+
+#
+# errno Decode Support
+#
 # CONFIG_LIBC_STRERROR is not set
 # CONFIG_LIBC_PERROR_STDOUT is not set
-CONFIG_ARCH_LOWPUTC=y
+
+#
+# memcpy/memset Options
+#
+# CONFIG_MEMSET_OPTSPEED is not set
+# CONFIG_LIBC_DLLFCN is not set
+# CONFIG_LIBC_MODLIB is not set
+# CONFIG_LIBC_WCHAR is not set
+# CONFIG_LIBC_LOCALE is not set
+
+#
+# Time/Time Zone Support
+#
 # CONFIG_TIME_EXTENDED is not set
-CONFIG_LIB_SENDFILE_BUFSIZE=512
-# CONFIG_ARCH_ROMGETC is not set
 CONFIG_ARCH_HAVE_TLS=y
+
+#
+# Thread Local Storage (TLS)
+#
 # CONFIG_TLS is not set
+
+#
+# Network-Related Options
+#
+# CONFIG_LIBC_IPv4_ADDRCONV is not set
+# CONFIG_LIBC_IPv6_ADDRCONV is not set
 # CONFIG_LIBC_NETDB is not set
 
+#
+# NETDB Support
+#
+# CONFIG_LIBC_IOCTL_VARIADIC is not set
+CONFIG_LIB_SENDFILE_BUFSIZE=512
+
 #
 # Non-standard Library Support
 #
 # CONFIG_LIB_CRC64_FAST is not set
 # CONFIG_LIB_KBDCODEC is not set
 # CONFIG_LIB_SLCDCODEC is not set
+# CONFIG_LIB_HEX2BIN is not set
 
 #
 # Basic CXX Support
@@ -597,9 +687,10 @@ CONFIG_ARCH_HAVE_TLS=y
 #
 # Examples
 #
+# CONFIG_EXAMPLES_BUTTONS is not set
+# CONFIG_EXAMPLES_CCTYPE is not set
 # CONFIG_EXAMPLES_CHAT is not set
 # CONFIG_EXAMPLES_CONFIGDATA is not set
-# CONFIG_EXAMPLES_CPUHOG is not set
 # CONFIG_EXAMPLES_DHCPD is not set
 # CONFIG_EXAMPLES_ELF is not set
 # CONFIG_EXAMPLES_FTPC is not set
@@ -630,10 +721,9 @@ CONFIG_EXAMPLES_OSTEST_NBARRIER_THREADS=3
 CONFIG_EXAMPLES_OSTEST_RR_RANGE=10000
 CONFIG_EXAMPLES_OSTEST_RR_RUNS=10
 # CONFIG_EXAMPLES_PCA9635 is not set
-# CONFIG_EXAMPLES_PIPE is not set
-# CONFIG_EXAMPLES_POLL is not set
 # CONFIG_EXAMPLES_POSIXSPAWN is not set
 # CONFIG_EXAMPLES_PPPD is not set
+# CONFIG_EXAMPLES_RFID_READUID is not set
 # CONFIG_EXAMPLES_RGBLED is not set
 # CONFIG_EXAMPLES_SENDMAIL is not set
 # CONFIG_EXAMPLES_SERIALBLASTER is not set
@@ -642,11 +732,11 @@ CONFIG_EXAMPLES_OSTEST_RR_RUNS=10
 # CONFIG_EXAMPLES_SLCD is not set
 # CONFIG_EXAMPLES_SMART is not set
 # CONFIG_EXAMPLES_SMP is not set
+# CONFIG_EXAMPLES_STAT is not set
 # CONFIG_EXAMPLES_TCPECHO is not set
 # CONFIG_EXAMPLES_TELNETD is not set
 # CONFIG_EXAMPLES_TIFF is not set
 # CONFIG_EXAMPLES_TOUCHSCREEN is not set
-# CONFIG_EXAMPLES_USBTERM is not set
 # CONFIG_EXAMPLES_WATCHDOG is not set
 # CONFIG_EXAMPLES_WEBSERVER is not set
 
@@ -671,6 +761,7 @@ CONFIG_EXAMPLES_OSTEST_RR_RUNS=10
 #
 # CONFIG_INTERPRETERS_FICL is not set
 # CONFIG_INTERPRETERS_MICROPYTHON is not set
+# CONFIG_INTERPRETERS_MINIBASIC is not set
 # CONFIG_INTERPRETERS_PCODE is not set
 
 #
@@ -707,13 +798,14 @@ CONFIG_EXAMPLES_OSTEST_RR_RUNS=10
 # CONFIG_SYSTEM_CLE is not set
 # CONFIG_SYSTEM_CUTERM is not set
 # CONFIG_SYSTEM_FREE is not set
-# CONFIG_LIB_HEX2BIN is not set
+# CONFIG_SYSTEM_HEX2BIN is not set
 # CONFIG_SYSTEM_HEXED is not set
 # CONFIG_SYSTEM_INSTALL is not set
 # CONFIG_SYSTEM_RAMTEST is not set
 # CONFIG_READLINE_HAVE_EXTMATCH is not set
 # CONFIG_SYSTEM_READLINE is not set
 # CONFIG_SYSTEM_SUDOKU is not set
+# CONFIG_SYSTEM_TEE is not set
 # CONFIG_SYSTEM_UBLOXMODEM is not set
 # CONFIG_SYSTEM_VI is not set
 # CONFIG_SYSTEM_ZMODEM is not set

configs/eagle100/httpd/defconfig

@@ -12,8 +12,10 @@
 # CONFIG_HOST_OSX is not set
 CONFIG_HOST_WINDOWS=y
 # CONFIG_HOST_OTHER is not set
+CONFIG_TOOLCHAIN_WINDOWS=y
 # CONFIG_WINDOWS_NATIVE is not set
 CONFIG_WINDOWS_CYGWIN=y
+# CONFIG_WINDOWS_UBUNTU is not set
 # CONFIG_WINDOWS_MSYS is not set
 # CONFIG_WINDOWS_OTHER is not set
 
@@ -109,7 +111,9 @@ CONFIG_ARCH_CHIP_LM=y
 # CONFIG_ARCH_ARM926EJS is not set
 # CONFIG_ARCH_ARM920T is not set
 # CONFIG_ARCH_CORTEXM0 is not set
+# CONFIG_ARCH_CORTEXM23 is not set
 CONFIG_ARCH_CORTEXM3=y
+# CONFIG_ARCH_CORTEXM33 is not set
 # CONFIG_ARCH_CORTEXM4 is not set
 # CONFIG_ARCH_CORTEXM7 is not set
 # CONFIG_ARCH_CORTEXA5 is not set
@@ -293,6 +297,7 @@ CONFIG_ARCH_STACKDUMP=y
 # CONFIG_ARCH_HAVE_RAMFUNCS is not set
 CONFIG_ARCH_HAVE_RAMVECTORS=y
 # CONFIG_ARCH_RAMVECTORS is not set
+# CONFIG_ARCH_MINIMAL_VECTORTABLE is not set
 
 #
 # Board Settings
@@ -372,6 +377,7 @@ CONFIG_PREALLOC_TIMERS=8
 #
 # Tasks and Scheduling
 #
+# CONFIG_SPINLOCK is not set
 # CONFIG_INIT_NONE is not set
 CONFIG_INIT_ENTRYPOINT=y
 # CONFIG_INIT_FILEPATH is not set
@@ -388,6 +394,8 @@ CONFIG_MAX_TASKS=8
 #
 # CONFIG_MUTEX_TYPES is not set
 CONFIG_NPTHREAD_KEYS=0
+# CONFIG_PTHREAD_CLEANUP is not set
+# CONFIG_CANCELLATION_POINTS is not set
 
 #
 # Performance Monitoring
@@ -466,10 +474,10 @@ CONFIG_DEV_NULL=y
 # CONFIG_PWM is not set
 # CONFIG_ARCH_HAVE_I2CRESET is not set
 # CONFIG_I2C is not set
-# CONFIG_SPI is not set
 # CONFIG_ARCH_HAVE_SPI_CRCGENERATION is not set
 # CONFIG_ARCH_HAVE_SPI_CS_CONTROL is not set
 # CONFIG_ARCH_HAVE_SPI_BITORDER is not set
+# CONFIG_SPI is not set
 # CONFIG_I2S is not set
 
 #
@@ -723,6 +731,7 @@ CONFIG_NET_HOSTNAME=""
 #
 CONFIG_DISABLE_MOUNTPOINT=y
 # CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
+# CONFIG_PSEUDOFS_SOFTLINKS is not set
 # CONFIG_FS_READABLE is not set
 # CONFIG_FS_WRITABLE is not set
 # CONFIG_FS_NAMED_SEMAPHORES is not set
@@ -769,34 +778,93 @@ CONFIG_MM_REGIONS=1
 #
 # Standard C Library Options
 #
+
+#
+# Standard C I/O
+#
+# CONFIG_STDIO_DISABLE_BUFFERING is not set
 CONFIG_STDIO_BUFFER_SIZE=0
 CONFIG_STDIO_LINEBUFFER=y
 CONFIG_NUNGET_CHARS=0
-# CONFIG_LIBM is not set
 # CONFIG_NOPRINTF_FIELDWIDTH is not set
 # CONFIG_LIBC_FLOATINGPOINT is not set
 CONFIG_LIBC_LONG_LONG=y
-# CONFIG_LIBC_IOCTL_VARIADIC is not set
-# CONFIG_LIBC_WCHAR is not set
-# CONFIG_LIBC_LOCALE is not set
-CONFIG_LIB_RAND_ORDER=1
+# CONFIG_LIBC_SCANSET is not set
 # CONFIG_EOL_IS_CR is not set
 # CONFIG_EOL_IS_LF is not set
 # CONFIG_EOL_IS_BOTH_CRLF is not set
 CONFIG_EOL_IS_EITHER_CRLF=y
+# CONFIG_MEMCPY_VIK is not set
+# CONFIG_LIBM is not set
+
+#
+# Architecture-Specific Support
+#
+CONFIG_ARCH_LOWPUTC=y
+# CONFIG_ARCH_ROMGETC is not set
+# CONFIG_LIBC_ARCH_MEMCPY is not set
+# CONFIG_LIBC_ARCH_MEMCMP is not set
+# CONFIG_LIBC_ARCH_MEMMOVE is not set
+# CONFIG_LIBC_ARCH_MEMSET is not set
+# CONFIG_LIBC_ARCH_STRCHR is not set
+# CONFIG_LIBC_ARCH_STRCMP is not set
+# CONFIG_LIBC_ARCH_STRCPY is not set
+# CONFIG_LIBC_ARCH_STRNCPY is not set
+# CONFIG_LIBC_ARCH_STRLEN is not set
+# CONFIG_LIBC_ARCH_STRNLEN is not set
+# CONFIG_LIBC_ARCH_ELF is not set
+# CONFIG_ARMV7M_MEMCPY is not set
+
+#
+# stdlib Options
+#
+CONFIG_LIB_RAND_ORDER=1
+
+#
+# Program Execution Options
+#
 # CONFIG_LIBC_EXECFUNCS is not set
 CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=1024
 CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=2048
+
+#
+# errno Decode Support
+#
 # CONFIG_LIBC_STRERROR is not set
 # CONFIG_LIBC_PERROR_STDOUT is not set
-CONFIG_ARCH_LOWPUTC=y
+
+#
+# memcpy/memset Options
+#
+# CONFIG_MEMSET_OPTSPEED is not set
+# CONFIG_LIBC_DLLFCN is not set
+# CONFIG_LIBC_MODLIB is not set
+# CONFIG_LIBC_WCHAR is not set
+# CONFIG_LIBC_LOCALE is not set
+
+#
+# Time/Time Zone Support
+#
 # CONFIG_TIME_EXTENDED is not set
-CONFIG_LIB_SENDFILE_BUFSIZE=512
-# CONFIG_ARCH_ROMGETC is not set
 CONFIG_ARCH_HAVE_TLS=y
+
+#
+# Thread Local Storage (TLS)
+#
 # CONFIG_TLS is not set
+
+#
+# Network-Related Options
+#
+# CONFIG_LIBC_IPv6_ADDRCONV is not set
 # CONFIG_LIBC_NETDB is not set
 
+#
+# NETDB Support
+#
+# CONFIG_LIBC_IOCTL_VARIADIC is not set
+CONFIG_LIB_SENDFILE_BUFSIZE=512
+
 #
 # Non-standard Library Support
 #
@@ -862,11 +930,11 @@ CONFIG_ARCH_HAVE_TLS=y
 # CONFIG_EXAMPLES_SLCD is not set
 # CONFIG_EXAMPLES_SMART is not set
 # CONFIG_EXAMPLES_SMP is not set
+# CONFIG_EXAMPLES_STAT is not set
 # CONFIG_EXAMPLES_TCPECHO is not set
 # CONFIG_EXAMPLES_TELNETD is not set
 # CONFIG_EXAMPLES_TIFF is not set
 # CONFIG_EXAMPLES_TOUCHSCREEN is not set
-# CONFIG_EXAMPLES_USBTERM is not set
 # CONFIG_EXAMPLES_WATCHDOG is not set
 CONFIG_EXAMPLES_WEBSERVER=y
 CONFIG_EXAMPLES_WEBSERVER_IPADDR=0x0a000002

configs/eagle100/nettest/defconfig

@@ -12,8 +12,10 @@
 # CONFIG_HOST_OSX is not set
 CONFIG_HOST_WINDOWS=y
 # CONFIG_HOST_OTHER is not set
+CONFIG_TOOLCHAIN_WINDOWS=y
 # CONFIG_WINDOWS_NATIVE is not set
 CONFIG_WINDOWS_CYGWIN=y
+# CONFIG_WINDOWS_UBUNTU is not set
 # CONFIG_WINDOWS_MSYS is not set
 # CONFIG_WINDOWS_OTHER is not set
 
@@ -109,7 +111,9 @@ CONFIG_ARCH_CHIP_LM=y
 # CONFIG_ARCH_ARM926EJS is not set
 # CONFIG_ARCH_ARM920T is not set
 # CONFIG_ARCH_CORTEXM0 is not set
+# CONFIG_ARCH_CORTEXM23 is not set
 CONFIG_ARCH_CORTEXM3=y
+# CONFIG_ARCH_CORTEXM33 is not set
 # CONFIG_ARCH_CORTEXM4 is not set
 # CONFIG_ARCH_CORTEXM7 is not set
 # CONFIG_ARCH_CORTEXA5 is not set
@@ -293,6 +297,7 @@ CONFIG_ARCH_STACKDUMP=y
 # CONFIG_ARCH_HAVE_RAMFUNCS is not set
 CONFIG_ARCH_HAVE_RAMVECTORS=y
 # CONFIG_ARCH_RAMVECTORS is not set
+# CONFIG_ARCH_MINIMAL_VECTORTABLE is not set
 
 #
 # Board Settings
@@ -372,6 +377,7 @@ CONFIG_PREALLOC_TIMERS=8
 #
 # Tasks and Scheduling
 #
+# CONFIG_SPINLOCK is not set
 # CONFIG_INIT_NONE is not set
 CONFIG_INIT_ENTRYPOINT=y
 # CONFIG_INIT_FILEPATH is not set
@@ -382,6 +388,7 @@ CONFIG_TASK_NAME_SIZE=0
 CONFIG_MAX_TASKS=8
 # CONFIG_SCHED_HAVE_PARENT is not set
 # CONFIG_SCHED_WAITPID is not set
+# CONFIG_CANCELLATION_POINTS is not set
 
 #
 # Performance Monitoring
@@ -459,10 +466,10 @@ CONFIG_DEV_NULL=y
 # CONFIG_PWM is not set
 # CONFIG_ARCH_HAVE_I2CRESET is not set
 # CONFIG_I2C is not set
-# CONFIG_SPI is not set
 # CONFIG_ARCH_HAVE_SPI_CRCGENERATION is not set
 # CONFIG_ARCH_HAVE_SPI_CS_CONTROL is not set
 # CONFIG_ARCH_HAVE_SPI_BITORDER is not set
+# CONFIG_SPI is not set
 # CONFIG_I2S is not set
 
 #
@@ -715,6 +722,7 @@ CONFIG_NET_HOSTNAME=""
 #
 CONFIG_DISABLE_MOUNTPOINT=y
 # CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
+# CONFIG_PSEUDOFS_SOFTLINKS is not set
 # CONFIG_FS_READABLE is not set
 # CONFIG_FS_WRITABLE is not set
 # CONFIG_FS_NAMED_SEMAPHORES is not set
@@ -761,34 +769,91 @@ CONFIG_MM_REGIONS=1
 #
 # Standard C Library Options
 #
+
+#
+# Standard C I/O
+#
 CONFIG_STDIO_DISABLE_BUFFERING=y
-CONFIG_STDIO_LINEBUFFER=y
 CONFIG_NUNGET_CHARS=0
-# CONFIG_LIBM is not set
 # CONFIG_NOPRINTF_FIELDWIDTH is not set
 # CONFIG_LIBC_FLOATINGPOINT is not set
 CONFIG_LIBC_LONG_LONG=y
-# CONFIG_LIBC_IOCTL_VARIADIC is not set
-# CONFIG_LIBC_WCHAR is not set
-# CONFIG_LIBC_LOCALE is not set
-CONFIG_LIB_RAND_ORDER=1
+# CONFIG_LIBC_SCANSET is not set
 # CONFIG_EOL_IS_CR is not set
 # CONFIG_EOL_IS_LF is not set
 # CONFIG_EOL_IS_BOTH_CRLF is not set
 CONFIG_EOL_IS_EITHER_CRLF=y
+# CONFIG_MEMCPY_VIK is not set
+# CONFIG_LIBM is not set
+
+#
+# Architecture-Specific Support
+#
+CONFIG_ARCH_LOWPUTC=y
+# CONFIG_ARCH_ROMGETC is not set
+# CONFIG_LIBC_ARCH_MEMCPY is not set
+# CONFIG_LIBC_ARCH_MEMCMP is not set
+# CONFIG_LIBC_ARCH_MEMMOVE is not set
+# CONFIG_LIBC_ARCH_MEMSET is not set
+# CONFIG_LIBC_ARCH_STRCHR is not set
+# CONFIG_LIBC_ARCH_STRCMP is not set
+# CONFIG_LIBC_ARCH_STRCPY is not set
+# CONFIG_LIBC_ARCH_STRNCPY is not set
+# CONFIG_LIBC_ARCH_STRLEN is not set
+# CONFIG_LIBC_ARCH_STRNLEN is not set
+# CONFIG_LIBC_ARCH_ELF is not set
+# CONFIG_ARMV7M_MEMCPY is not set
+
+#
+# stdlib Options
+#
+CONFIG_LIB_RAND_ORDER=1
+
+#
+# Program Execution Options
+#
 # CONFIG_LIBC_EXECFUNCS is not set
 CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=1024
 CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=2048
+
+#
+# errno Decode Support
+#
 # CONFIG_LIBC_STRERROR is not set
 # CONFIG_LIBC_PERROR_STDOUT is not set
-CONFIG_ARCH_LOWPUTC=y
+
+#
+# memcpy/memset Options
+#
+# CONFIG_MEMSET_OPTSPEED is not set
+# CONFIG_LIBC_DLLFCN is not set
+# CONFIG_LIBC_MODLIB is not set
+# CONFIG_LIBC_WCHAR is not set
+# CONFIG_LIBC_LOCALE is not set
+
+#
+# Time/Time Zone Support
+#
 # CONFIG_TIME_EXTENDED is not set
-CONFIG_LIB_SENDFILE_BUFSIZE=512
-# CONFIG_ARCH_ROMGETC is not set
 CONFIG_ARCH_HAVE_TLS=y
+
+#
+# Thread Local Storage (TLS)
+#
 # CONFIG_TLS is not set
+
+#
+# Network-Related Options
+#
+# CONFIG_LIBC_IPv6_ADDRCONV is not set
 # CONFIG_LIBC_NETDB is not set
 
+#
+# NETDB Support
+#
+# CONFIG_LIBC_IOCTL_VARIADIC is not set
+CONFIG_LIB_SENDFILE_BUFSIZE=512
+
 #
 # Non-standard Library Support
 #
@@ -867,11 +932,11 @@ CONFIG_EXAMPLES_NETTEST_CLIENTIP=0x0a000001
 # CONFIG_EXAMPLES_SLCD is not set
 # CONFIG_EXAMPLES_SMART is not set
 # CONFIG_EXAMPLES_SMP is not set
+# CONFIG_EXAMPLES_STAT is not set
 # CONFIG_EXAMPLES_TCPECHO is not set
 # CONFIG_EXAMPLES_TELNETD is not set
 # CONFIG_EXAMPLES_TIFF is not set
 # CONFIG_EXAMPLES_TOUCHSCREEN is not set
-# CONFIG_EXAMPLES_USBTERM is not set
 # CONFIG_EXAMPLES_WATCHDOG is not set
 # CONFIG_EXAMPLES_WEBSERVER is not set
 # CONFIG_EXAMPLES_WGET is not set

configs/eagle100/nsh/defconfig

@@ -12,8 +12,10 @@
 # CONFIG_HOST_OSX is not set
 CONFIG_HOST_WINDOWS=y
 # CONFIG_HOST_OTHER is not set
+CONFIG_TOOLCHAIN_WINDOWS=y
 # CONFIG_WINDOWS_NATIVE is not set
 CONFIG_WINDOWS_CYGWIN=y
+# CONFIG_WINDOWS_UBUNTU is not set
 # CONFIG_WINDOWS_MSYS is not set
 # CONFIG_WINDOWS_OTHER is not set
 
@@ -109,7 +111,9 @@ CONFIG_ARCH_CHIP_LM=y
 # CONFIG_ARCH_ARM926EJS is not set
 # CONFIG_ARCH_ARM920T is not set
 # CONFIG_ARCH_CORTEXM0 is not set
+# CONFIG_ARCH_CORTEXM23 is not set
 CONFIG_ARCH_CORTEXM3=y
+# CONFIG_ARCH_CORTEXM33 is not set
 # CONFIG_ARCH_CORTEXM4 is not set
 # CONFIG_ARCH_CORTEXM7 is not set
 # CONFIG_ARCH_CORTEXA5 is not set
@@ -293,6 +297,7 @@ CONFIG_ARCH_STACKDUMP=y
 # CONFIG_ARCH_HAVE_RAMFUNCS is not set
 CONFIG_ARCH_HAVE_RAMVECTORS=y
 # CONFIG_ARCH_RAMVECTORS is not set
+# CONFIG_ARCH_MINIMAL_VECTORTABLE is not set
 
 #
 # Board Settings
@@ -377,6 +382,7 @@ CONFIG_PREALLOC_TIMERS=4
 #
 # Tasks and Scheduling
 #
+# CONFIG_SPINLOCK is not set
 # CONFIG_INIT_NONE is not set
 CONFIG_INIT_ENTRYPOINT=y
 # CONFIG_INIT_FILEPATH is not set
@@ -393,6 +399,8 @@ CONFIG_MAX_TASKS=16
 #
 # CONFIG_MUTEX_TYPES is not set
 CONFIG_NPTHREAD_KEYS=4
+# CONFIG_PTHREAD_CLEANUP is not set
+# CONFIG_CANCELLATION_POINTS is not set
 
 #
 # Performance Monitoring
@@ -477,10 +485,10 @@ CONFIG_DEV_NULL=y
 # CONFIG_PWM is not set
 # CONFIG_ARCH_HAVE_I2CRESET is not set
 # CONFIG_I2C is not set
-CONFIG_SPI=y
 # CONFIG_ARCH_HAVE_SPI_CRCGENERATION is not set
 # CONFIG_ARCH_HAVE_SPI_CS_CONTROL is not set
 # CONFIG_ARCH_HAVE_SPI_BITORDER is not set
+CONFIG_SPI=y
 # CONFIG_SPI_SLAVE is not set
 CONFIG_SPI_EXCHANGE=y
 # CONFIG_SPI_CMDDATA is not set
@@ -533,6 +541,7 @@ CONFIG_MMCSD_SPI=y
 CONFIG_MMCSD_SPICLOCK=12500000
 CONFIG_MMCSD_SPIMODE=0
 # CONFIG_ARCH_HAVE_SDIO is not set
+# CONFIG_SDIO_DMA is not set
 # CONFIG_ARCH_HAVE_SDIOWAIT_WRCOMPLETE is not set
 # CONFIG_MODEM is not set
 # CONFIG_MTD is not set
@@ -761,6 +770,7 @@ CONFIG_NET_HOSTNAME=""
 # CONFIG_DISABLE_MOUNTPOINT is not set
 # CONFIG_FS_AUTOMOUNTER is not set
 # CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
+# CONFIG_PSEUDOFS_SOFTLINKS is not set
 CONFIG_FS_READABLE=y
 CONFIG_FS_WRITABLE=y
 # CONFIG_FS_NAMED_SEMAPHORES is not set
@@ -821,37 +831,94 @@ CONFIG_MM_REGIONS=1
 #
 # Standard C Library Options
 #
+
+#
+# Standard C I/O
+#
+# CONFIG_STDIO_DISABLE_BUFFERING is not set
 CONFIG_STDIO_BUFFER_SIZE=64
 CONFIG_STDIO_LINEBUFFER=y
 CONFIG_NUNGET_CHARS=2
-CONFIG_LIB_HOMEDIR="/"
-# CONFIG_LIBM is not set
 # CONFIG_NOPRINTF_FIELDWIDTH is not set
 # CONFIG_LIBC_FLOATINGPOINT is not set
 CONFIG_LIBC_LONG_LONG=y
-# CONFIG_LIBC_IOCTL_VARIADIC is not set
-# CONFIG_LIBC_WCHAR is not set
-# CONFIG_LIBC_LOCALE is not set
-CONFIG_LIB_RAND_ORDER=1
+# CONFIG_LIBC_SCANSET is not set
 # CONFIG_EOL_IS_CR is not set
 # CONFIG_EOL_IS_LF is not set
 # CONFIG_EOL_IS_BOTH_CRLF is not set
 CONFIG_EOL_IS_EITHER_CRLF=y
+# CONFIG_MEMCPY_VIK is not set
+# CONFIG_LIBM is not set
+
+#
+# Architecture-Specific Support
+#
+CONFIG_ARCH_LOWPUTC=y
+# CONFIG_ARCH_ROMGETC is not set
+# CONFIG_LIBC_ARCH_MEMCPY is not set
+# CONFIG_LIBC_ARCH_MEMCMP is not set
+# CONFIG_LIBC_ARCH_MEMMOVE is not set
+# CONFIG_LIBC_ARCH_MEMSET is not set
+# CONFIG_LIBC_ARCH_STRCHR is not set
+# CONFIG_LIBC_ARCH_STRCMP is not set
+# CONFIG_LIBC_ARCH_STRCPY is not set
+# CONFIG_LIBC_ARCH_STRNCPY is not set
+# CONFIG_LIBC_ARCH_STRLEN is not set
+# CONFIG_LIBC_ARCH_STRNLEN is not set
+# CONFIG_LIBC_ARCH_ELF is not set
+# CONFIG_ARMV7M_MEMCPY is not set
+
+#
+# stdlib Options
+#
+CONFIG_LIB_RAND_ORDER=1
+CONFIG_LIB_HOMEDIR="/"
+CONFIG_LIBC_TMPDIR="/tmp"
+CONFIG_LIBC_MAX_TMPFILE=32
+
+#
+# Program Execution Options
+#
 # CONFIG_LIBC_EXECFUNCS is not set
 CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=1024
 CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=2048
+
+#
+# errno Decode Support
+#
 # CONFIG_LIBC_STRERROR is not set
 # CONFIG_LIBC_PERROR_STDOUT is not set
-CONFIG_LIBC_TMPDIR="/tmp"
-CONFIG_LIBC_MAX_TMPFILE=32
-CONFIG_ARCH_LOWPUTC=y
+
+#
+# memcpy/memset Options
+#
+# CONFIG_MEMSET_OPTSPEED is not set
+# CONFIG_LIBC_DLLFCN is not set
+# CONFIG_LIBC_MODLIB is not set
+# CONFIG_LIBC_WCHAR is not set
+# CONFIG_LIBC_LOCALE is not set
+
+#
+# Time/Time Zone Support
+#
 # CONFIG_LIBC_LOCALTIME is not set
 # CONFIG_TIME_EXTENDED is not set
-CONFIG_LIB_SENDFILE_BUFSIZE=512
-# CONFIG_ARCH_ROMGETC is not set
 CONFIG_ARCH_HAVE_TLS=y
+
+#
+# Thread Local Storage (TLS)
+#
 # CONFIG_TLS is not set
+
+#
+# Network-Related Options
+#
+# CONFIG_LIBC_IPv6_ADDRCONV is not set
 CONFIG_LIBC_NETDB=y
+
+#
+# NETDB Support
+#
 # CONFIG_NETDB_HOSTFILE is not set
 CONFIG_NETDB_DNSCLIENT=y
 CONFIG_NETDB_DNSCLIENT_ENTRIES=4
@@ -861,6 +928,8 @@ CONFIG_NETDB_DNSCLIENT_MAXRESPONSE=96
 # CONFIG_NETDB_RESOLVCONF is not set
 CONFIG_NETDB_DNSSERVER_NOADDR=y
 # CONFIG_NETDB_DNSSERVER_IPv4 is not set
+# CONFIG_LIBC_IOCTL_VARIADIC is not set
+CONFIG_LIB_SENDFILE_BUFSIZE=512
 
 #
 # Non-standard Library Support
@@ -929,6 +998,7 @@ CONFIG_EXAMPLES_NSH=y
 # CONFIG_EXAMPLES_SLCD is not set
 # CONFIG_EXAMPLES_SMART is not set
 # CONFIG_EXAMPLES_SMP is not set
+# CONFIG_EXAMPLES_STAT is not set
 # CONFIG_EXAMPLES_TCPECHO is not set
 # CONFIG_EXAMPLES_TELNETD is not set
 # CONFIG_EXAMPLES_TIFF is not set
@@ -936,7 +1006,6 @@ CONFIG_EXAMPLES_NSH=y
 # CONFIG_EXAMPLES_UDP is not set
 # CONFIG_EXAMPLES_UDPBLASTER is not set
 # CONFIG_EXAMPLES_USBSERIAL is not set
-# CONFIG_EXAMPLES_USBTERM is not set
 # CONFIG_EXAMPLES_WATCHDOG is not set
 # CONFIG_EXAMPLES_WEBSERVER is not set
 # CONFIG_EXAMPLES_WGET is not set
@@ -1076,6 +1145,7 @@ CONFIG_NSH_MMCSDSPIPORTNO=0
 # Configure Command Options
 #
 CONFIG_NSH_CMDOPT_DF_H=y
+# CONFIG_NSH_CMDOPT_DD_STATS is not set
 CONFIG_NSH_CODECS_BUFSIZE=128
 CONFIG_NSH_CMDOPT_HEXDUMP=y
 CONFIG_NSH_FILEIOSIZE=512

configs/eagle100/nxflat/defconfig

@@ -12,8 +12,10 @@
 # CONFIG_HOST_OSX is not set
 CONFIG_HOST_WINDOWS=y
 # CONFIG_HOST_OTHER is not set
+CONFIG_TOOLCHAIN_WINDOWS=y
 # CONFIG_WINDOWS_NATIVE is not set
 CONFIG_WINDOWS_CYGWIN=y
+# CONFIG_WINDOWS_UBUNTU is not set
 # CONFIG_WINDOWS_MSYS is not set
 # CONFIG_WINDOWS_OTHER is not set
 
@@ -64,9 +66,12 @@ CONFIG_ARCH_ARM=y
 # CONFIG_ARCH_AVR is not set
 # CONFIG_ARCH_HC is not set
 # CONFIG_ARCH_MIPS is not set
+# CONFIG_ARCH_MISOC is not set
 # CONFIG_ARCH_RENESAS is not set
+# CONFIG_ARCH_RISCV is not set
 # CONFIG_ARCH_SIM is not set
 # CONFIG_ARCH_X86 is not set
+# CONFIG_ARCH_XTENSA is not set
 # CONFIG_ARCH_Z16 is not set
 # CONFIG_ARCH_Z80 is not set
 CONFIG_ARCH="arm"
@@ -106,7 +111,9 @@ CONFIG_ARCH_CHIP_LM=y
 # CONFIG_ARCH_ARM926EJS is not set
 # CONFIG_ARCH_ARM920T is not set
 # CONFIG_ARCH_CORTEXM0 is not set
+# CONFIG_ARCH_CORTEXM23 is not set
 CONFIG_ARCH_CORTEXM3=y
+# CONFIG_ARCH_CORTEXM33 is not set
 # CONFIG_ARCH_CORTEXM4 is not set
 # CONFIG_ARCH_CORTEXM7 is not set
 # CONFIG_ARCH_CORTEXA5 is not set
@@ -275,6 +282,7 @@ CONFIG_ARCH_STACKDUMP=y
 # CONFIG_ARCH_HAVE_RAMFUNCS is not set
 CONFIG_ARCH_HAVE_RAMVECTORS=y
 # CONFIG_ARCH_RAMVECTORS is not set
+# CONFIG_ARCH_MINIMAL_VECTORTABLE is not set
 
 #
 # Board Settings
@@ -322,6 +330,7 @@ CONFIG_ARCH_LEDS=y
 #
 # Board-Specific Options
 #
+# CONFIG_BOARD_CRASHDUMP is not set
 # CONFIG_LIB_BOARDCTL is not set
 
 #
@@ -340,6 +349,7 @@ CONFIG_DISABLE_ENVIRON=y
 CONFIG_USEC_PER_TICK=10000
 # CONFIG_SYSTEM_TIME64 is not set
 # CONFIG_CLOCK_MONOTONIC is not set
+# CONFIG_ARCH_HAVE_TIMEKEEPING is not set
 # CONFIG_JULIAN_TIME is not set
 CONFIG_START_YEAR=2009
 CONFIG_START_MONTH=5
@@ -352,6 +362,7 @@ CONFIG_PREALLOC_TIMERS=4
 #
 # Tasks and Scheduling
 #
+# CONFIG_SPINLOCK is not set
 # CONFIG_INIT_NONE is not set
 CONFIG_INIT_ENTRYPOINT=y
 # CONFIG_INIT_FILEPATH is not set
@@ -368,6 +379,8 @@ CONFIG_MAX_TASKS=16
 #
 # CONFIG_MUTEX_TYPES is not set
 CONFIG_NPTHREAD_KEYS=4
+# CONFIG_PTHREAD_CLEANUP is not set
+# CONFIG_CANCELLATION_POINTS is not set
 
 #
 # Performance Monitoring
@@ -432,6 +445,7 @@ CONFIG_PTHREAD_STACK_DEFAULT=2048
 CONFIG_DISABLE_POLL=y
 CONFIG_DEV_NULL=y
 # CONFIG_DEV_ZERO is not set
+# CONFIG_DEV_URANDOM is not set
 # CONFIG_DEV_LOOP is not set
 
 #
@@ -446,6 +460,9 @@ CONFIG_DEV_NULL=y
 # CONFIG_PWM is not set
 # CONFIG_ARCH_HAVE_I2CRESET is not set
 # CONFIG_I2C is not set
+# CONFIG_ARCH_HAVE_SPI_CRCGENERATION is not set
+# CONFIG_ARCH_HAVE_SPI_CS_CONTROL is not set
+# CONFIG_ARCH_HAVE_SPI_BITORDER is not set
 # CONFIG_SPI is not set
 # CONFIG_I2S is not set
 
@@ -453,6 +470,7 @@ CONFIG_DEV_NULL=y
 # Timer Driver Support
 #
 # CONFIG_TIMER is not set
+# CONFIG_ONESHOT is not set
 # CONFIG_RTC is not set
 # CONFIG_WATCHDOG is not set
 # CONFIG_ANALOG is not set
@@ -460,7 +478,12 @@ CONFIG_DEV_NULL=y
 # CONFIG_VIDEO_DEVICES is not set
 # CONFIG_BCH is not set
 # CONFIG_INPUT is not set
+
+#
+# IO Expander/GPIO Support
+#
 # CONFIG_IOEXPANDER is not set
+# CONFIG_DEV_GPIO is not set
 
 #
 # LCD Driver Support
@@ -531,9 +554,12 @@ CONFIG_UART0_2STOP=0
 # CONFIG_UART0_IFLOWCONTROL is not set
 # CONFIG_UART0_OFLOWCONTROL is not set
 # CONFIG_UART0_DMA is not set
+# CONFIG_PSEUDOTERM is not set
 # CONFIG_USBDEV is not set
 # CONFIG_USBHOST is not set
+# CONFIG_HAVE_USBTRACE is not set
 # CONFIG_DRIVERS_WIRELESS is not set
+# CONFIG_DRIVERS_CONTACTLESS is not set
 
 #
 # System Logging
@@ -547,6 +573,7 @@ CONFIG_SYSLOG_SERIAL_CONSOLE=y
 CONFIG_SYSLOG_CONSOLE=y
 # CONFIG_SYSLOG_NONE is not set
 # CONFIG_SYSLOG_FILE is not set
+# CONFIG_SYSLOG_CHARDEV is not set
 
 #
 # Networking Support
@@ -570,6 +597,7 @@ CONFIG_SYSLOG_CONSOLE=y
 # CONFIG_DISABLE_MOUNTPOINT is not set
 # CONFIG_FS_AUTOMOUNTER is not set
 # CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
+# CONFIG_PSEUDOFS_SOFTLINKS is not set
 CONFIG_FS_READABLE=y
 # CONFIG_FS_WRITABLE is not set
 # CONFIG_FS_NAMED_SEMAPHORES is not set
@@ -622,32 +650,94 @@ CONFIG_SYMTAB_ORDEREDBYNAME=y
 #
 # Standard C Library Options
 #
+
+#
+# Standard C I/O
+#
+# CONFIG_STDIO_DISABLE_BUFFERING is not set
 CONFIG_STDIO_BUFFER_SIZE=64
 CONFIG_STDIO_LINEBUFFER=y
 CONFIG_NUNGET_CHARS=2
-# CONFIG_LIBM is not set
 # CONFIG_NOPRINTF_FIELDWIDTH is not set
 # CONFIG_LIBC_FLOATINGPOINT is not set
 CONFIG_LIBC_LONG_LONG=y
-# CONFIG_LIBC_IOCTL_VARIADIC is not set
-CONFIG_LIB_RAND_ORDER=1
+# CONFIG_LIBC_SCANSET is not set
 # CONFIG_EOL_IS_CR is not set
 # CONFIG_EOL_IS_LF is not set
 # CONFIG_EOL_IS_BOTH_CRLF is not set
 CONFIG_EOL_IS_EITHER_CRLF=y
+# CONFIG_MEMCPY_VIK is not set
+# CONFIG_LIBM is not set
+
+#
+# Architecture-Specific Support
+#
+CONFIG_ARCH_LOWPUTC=y
+# CONFIG_ARCH_ROMGETC is not set
+# CONFIG_LIBC_ARCH_MEMCPY is not set
+# CONFIG_LIBC_ARCH_MEMCMP is not set
+# CONFIG_LIBC_ARCH_MEMMOVE is not set
+# CONFIG_LIBC_ARCH_MEMSET is not set
+# CONFIG_LIBC_ARCH_STRCHR is not set
+# CONFIG_LIBC_ARCH_STRCMP is not set
+# CONFIG_LIBC_ARCH_STRCPY is not set
+# CONFIG_LIBC_ARCH_STRNCPY is not set
+# CONFIG_LIBC_ARCH_STRLEN is not set
+# CONFIG_LIBC_ARCH_STRNLEN is not set
+# CONFIG_LIBC_ARCH_ELF is not set
+# CONFIG_ARMV7M_MEMCPY is not set
+
+#
+# stdlib Options
+#
+CONFIG_LIB_RAND_ORDER=1
+
+#
+# Program Execution Options
+#
 # CONFIG_LIBC_EXECFUNCS is not set
 CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=1024
 CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=2048
+
+#
+# errno Decode Support
+#
 # CONFIG_LIBC_STRERROR is not set
 # CONFIG_LIBC_PERROR_STDOUT is not set
-CONFIG_ARCH_LOWPUTC=y
+
+#
+# memcpy/memset Options
+#
+# CONFIG_MEMSET_OPTSPEED is not set
+# CONFIG_LIBC_DLLFCN is not set
+# CONFIG_LIBC_MODLIB is not set
+# CONFIG_LIBC_WCHAR is not set
+# CONFIG_LIBC_LOCALE is not set
+
+#
+# Time/Time Zone Support
+#
 # CONFIG_TIME_EXTENDED is not set
-CONFIG_LIB_SENDFILE_BUFSIZE=512
-# CONFIG_ARCH_ROMGETC is not set
 CONFIG_ARCH_HAVE_TLS=y
+
+#
+# Thread Local Storage (TLS)
+#
 # CONFIG_TLS is not set
+
+#
+# Network-Related Options
+#
+# CONFIG_LIBC_IPv4_ADDRCONV is not set
+# CONFIG_LIBC_IPv6_ADDRCONV is not set
 # CONFIG_LIBC_NETDB is not set
+
+#
+# NETDB Support
+#
 # CONFIG_NETDB_HOSTFILE is not set
+# CONFIG_LIBC_IOCTL_VARIADIC is not set
+CONFIG_LIB_SENDFILE_BUFSIZE=512
 
 #
 # Non-standard Library Support
@@ -655,6 +745,7 @@ CONFIG_ARCH_HAVE_TLS=y
 # CONFIG_LIB_CRC64_FAST is not set
 # CONFIG_LIB_KBDCODEC is not set
 # CONFIG_LIB_SLCDCODEC is not set
+# CONFIG_LIB_HEX2BIN is not set
 
 #
 # Basic CXX Support
@@ -673,9 +764,9 @@ CONFIG_ARCH_HAVE_TLS=y
 #
 # Examples
 #
+# CONFIG_EXAMPLES_CCTYPE is not set
 # CONFIG_EXAMPLES_CHAT is not set
 # CONFIG_EXAMPLES_CONFIGDATA is not set
-# CONFIG_EXAMPLES_CPUHOG is not set
 # CONFIG_EXAMPLES_DHCPD is not set
 # CONFIG_EXAMPLES_ELF is not set
 # CONFIG_EXAMPLES_FTPC is not set
@@ -702,10 +793,9 @@ CONFIG_EXAMPLES_NXFLAT=y
 # CONFIG_EXAMPLES_NXTEXT is not set
 # CONFIG_EXAMPLES_OSTEST is not set
 # CONFIG_EXAMPLES_PCA9635 is not set
-# CONFIG_EXAMPLES_PIPE is not set
-# CONFIG_EXAMPLES_POLL is not set
 # CONFIG_EXAMPLES_POSIXSPAWN is not set
 # CONFIG_EXAMPLES_PPPD is not set
+# CONFIG_EXAMPLES_RFID_READUID is not set
 # CONFIG_EXAMPLES_RGBLED is not set
 # CONFIG_EXAMPLES_ROMFS is not set
 # CONFIG_EXAMPLES_SENDMAIL is not set
@@ -715,13 +805,13 @@ CONFIG_EXAMPLES_NXFLAT=y
 # CONFIG_EXAMPLES_SLCD is not set
 # CONFIG_EXAMPLES_SMART is not set
 # CONFIG_EXAMPLES_SMP is not set
+# CONFIG_EXAMPLES_STAT is not set
 # CONFIG_EXAMPLES_TCPECHO is not set
 # CONFIG_EXAMPLES_TELNETD is not set
 # CONFIG_EXAMPLES_THTTPD is not set
 # CONFIG_EXAMPLES_TIFF is not set
 # CONFIG_EXAMPLES_TOUCHSCREEN is not set
 # CONFIG_EXAMPLES_UNIONFS is not set
-# CONFIG_EXAMPLES_USBTERM is not set
 # CONFIG_EXAMPLES_WATCHDOG is not set
 # CONFIG_EXAMPLES_WEBSERVER is not set
 
@@ -748,6 +838,7 @@ CONFIG_EXAMPLES_NXFLAT=y
 # CONFIG_INTERPRETERS_BAS is not set
 # CONFIG_INTERPRETERS_FICL is not set
 # CONFIG_INTERPRETERS_MICROPYTHON is not set
+# CONFIG_INTERPRETERS_MINIBASIC is not set
 # CONFIG_INTERPRETERS_PCODE is not set
 
 #
@@ -784,13 +875,14 @@ CONFIG_EXAMPLES_NXFLAT=y
 # CONFIG_SYSTEM_CLE is not set
 # CONFIG_SYSTEM_CUTERM is not set
 # CONFIG_SYSTEM_FREE is not set
-# CONFIG_LIB_HEX2BIN is not set
+# CONFIG_SYSTEM_HEX2BIN is not set
 # CONFIG_SYSTEM_HEXED is not set
 # CONFIG_SYSTEM_INSTALL is not set
 # CONFIG_SYSTEM_RAMTEST is not set
 # CONFIG_READLINE_HAVE_EXTMATCH is not set
 # CONFIG_SYSTEM_READLINE is not set
 # CONFIG_SYSTEM_SUDOKU is not set
+# CONFIG_SYSTEM_TEE is not set
 # CONFIG_SYSTEM_UBLOXMODEM is not set
 # CONFIG_SYSTEM_VI is not set
 # CONFIG_SYSTEM_ZMODEM is not set

configs/eagle100/thttpd/defconfig

@@ -105,7 +105,9 @@ CONFIG_ARCH_CHIP_LM=y
 # CONFIG_ARCH_ARM926EJS is not set
 # CONFIG_ARCH_ARM920T is not set
 # CONFIG_ARCH_CORTEXM0 is not set
+# CONFIG_ARCH_CORTEXM23 is not set
 CONFIG_ARCH_CORTEXM3=y
+# CONFIG_ARCH_CORTEXM33 is not set
 # CONFIG_ARCH_CORTEXM4 is not set
 # CONFIG_ARCH_CORTEXM7 is not set
 # CONFIG_ARCH_CORTEXA5 is not set
@@ -286,6 +288,7 @@ CONFIG_ARCH_STACKDUMP=y
 # CONFIG_ARCH_HAVE_RAMFUNCS is not set
 CONFIG_ARCH_HAVE_RAMVECTORS=y
 # CONFIG_ARCH_RAMVECTORS is not set
+# CONFIG_ARCH_MINIMAL_VECTORTABLE is not set
 
 #
 # Board Settings
@@ -365,6 +368,7 @@ CONFIG_PREALLOC_TIMERS=8
 #
 # Tasks and Scheduling
 #
+# CONFIG_SPINLOCK is not set
 # CONFIG_INIT_NONE is not set
 CONFIG_INIT_ENTRYPOINT=y
 # CONFIG_INIT_FILEPATH is not set
@@ -375,6 +379,7 @@ CONFIG_TASK_NAME_SIZE=0
 CONFIG_MAX_TASKS=16
 # CONFIG_SCHED_HAVE_PARENT is not set
 # CONFIG_SCHED_WAITPID is not set
+# CONFIG_CANCELLATION_POINTS is not set
 
 #
 # Performance Monitoring
@@ -452,10 +457,10 @@ CONFIG_DEV_NULL=y
 # CONFIG_PWM is not set
 # CONFIG_ARCH_HAVE_I2CRESET is not set
 # CONFIG_I2C is not set
-# CONFIG_SPI is not set
 # CONFIG_ARCH_HAVE_SPI_CRCGENERATION is not set
 # CONFIG_ARCH_HAVE_SPI_CS_CONTROL is not set
 # CONFIG_ARCH_HAVE_SPI_BITORDER is not set
+# CONFIG_SPI is not set
 # CONFIG_I2S is not set
 
 #
@@ -712,6 +717,7 @@ CONFIG_NET_HOSTNAME=""
 # CONFIG_DISABLE_MOUNTPOINT is not set
 # CONFIG_FS_AUTOMOUNTER is not set
 # CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
+# CONFIG_PSEUDOFS_SOFTLINKS is not set
 CONFIG_FS_READABLE=y
 # CONFIG_FS_WRITABLE is not set
 # CONFIG_FS_NAMED_SEMAPHORES is not set
@@ -764,36 +770,95 @@ CONFIG_SYMTAB_ORDEREDBYNAME=y
 #
 # Standard C Library Options
 #
+
+#
+# Standard C I/O
+#
+# CONFIG_STDIO_DISABLE_BUFFERING is not set
 CONFIG_STDIO_BUFFER_SIZE=64
 CONFIG_STDIO_LINEBUFFER=y
 CONFIG_NUNGET_CHARS=0
-CONFIG_LIB_HOMEDIR="/"
-# CONFIG_LIBM is not set
 # CONFIG_NOPRINTF_FIELDWIDTH is not set
 # CONFIG_LIBC_FLOATINGPOINT is not set
 CONFIG_LIBC_LONG_LONG=y
-# CONFIG_LIBC_IOCTL_VARIADIC is not set
-# CONFIG_LIBC_WCHAR is not set
-# CONFIG_LIBC_LOCALE is not set
-CONFIG_LIB_RAND_ORDER=1
+# CONFIG_LIBC_SCANSET is not set
 # CONFIG_EOL_IS_CR is not set
 # CONFIG_EOL_IS_LF is not set
 # CONFIG_EOL_IS_BOTH_CRLF is not set
 CONFIG_EOL_IS_EITHER_CRLF=y
+# CONFIG_MEMCPY_VIK is not set
+# CONFIG_LIBM is not set
+
+#
+# Architecture-Specific Support
+#
+CONFIG_ARCH_LOWPUTC=y
+# CONFIG_ARCH_ROMGETC is not set
+# CONFIG_LIBC_ARCH_MEMCPY is not set
+# CONFIG_LIBC_ARCH_MEMCMP is not set
+# CONFIG_LIBC_ARCH_MEMMOVE is not set
+# CONFIG_LIBC_ARCH_MEMSET is not set
+# CONFIG_LIBC_ARCH_STRCHR is not set
+# CONFIG_LIBC_ARCH_STRCMP is not set
+# CONFIG_LIBC_ARCH_STRCPY is not set
+# CONFIG_LIBC_ARCH_STRNCPY is not set
+# CONFIG_LIBC_ARCH_STRLEN is not set
+# CONFIG_LIBC_ARCH_STRNLEN is not set
+# CONFIG_LIBC_ARCH_ELF is not set
+# CONFIG_ARMV7M_MEMCPY is not set
+
+#
+# stdlib Options
+#
+CONFIG_LIB_RAND_ORDER=1
+CONFIG_LIB_HOMEDIR="/"
+
+#
+# Program Execution Options
+#
 # CONFIG_LIBC_EXECFUNCS is not set
 CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=1024
 CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=2048
+
+#
+# errno Decode Support
+#
 # CONFIG_LIBC_STRERROR is not set
 # CONFIG_LIBC_PERROR_STDOUT is not set
-CONFIG_ARCH_LOWPUTC=y
+
+#
+# memcpy/memset Options
+#
+# CONFIG_MEMSET_OPTSPEED is not set
+# CONFIG_LIBC_DLLFCN is not set
+# CONFIG_LIBC_MODLIB is not set
+# CONFIG_LIBC_WCHAR is not set
+# CONFIG_LIBC_LOCALE is not set
+
+#
+# Time/Time Zone Support
+#
 # CONFIG_LIBC_LOCALTIME is not set
 # CONFIG_TIME_EXTENDED is not set
-CONFIG_LIB_SENDFILE_BUFSIZE=512
-# CONFIG_ARCH_ROMGETC is not set
 CONFIG_ARCH_HAVE_TLS=y
+
+#
+# Thread Local Storage (TLS)
+#
 # CONFIG_TLS is not set
+
+#
+# Network-Related Options
+#
+# CONFIG_LIBC_IPv6_ADDRCONV is not set
 # CONFIG_LIBC_NETDB is not set
+
+#
+# NETDB Support
+#
 # CONFIG_NETDB_HOSTFILE is not set
+# CONFIG_LIBC_IOCTL_VARIADIC is not set
+CONFIG_LIB_SENDFILE_BUFSIZE=512
 
 #
 # Non-standard Library Support
@@ -865,6 +930,7 @@ CONFIG_ARCH_HAVE_TLS=y
 # CONFIG_EXAMPLES_SLCD is not set
 # CONFIG_EXAMPLES_SMART is not set
 # CONFIG_EXAMPLES_SMP is not set
+# CONFIG_EXAMPLES_STAT is not set
 # CONFIG_EXAMPLES_TCPECHO is not set
 # CONFIG_EXAMPLES_TELNETD is not set
 CONFIG_EXAMPLES_THTTPD=y
@@ -874,7 +940,6 @@ CONFIG_EXAMPLES_THTTPD_NETMASK=0xffffff00
 # CONFIG_EXAMPLES_TIFF is not set
 # CONFIG_EXAMPLES_TOUCHSCREEN is not set
 # CONFIG_EXAMPLES_UNIONFS is not set
-# CONFIG_EXAMPLES_USBTERM is not set
 # CONFIG_EXAMPLES_WATCHDOG is not set
 # CONFIG_EXAMPLES_WEBSERVER is not set
 # CONFIG_EXAMPLES_WGET is not set