Added STR-P711 NSH configuration

git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@1850 42af7a65-404d-4744-a932-0658087f49c3
This commit is contained in:
patacongo
2009-06-05 13:59:46 +00:00
parent 0a4593ad89
commit b4fc114189
5 changed files with 945 additions and 1 deletions
+15 -1
View File
@@ -79,6 +79,8 @@ Toolchain
4. cd <some-dir>/buildroot 4. cd <some-dir>/buildroot
5. cp configs/arm-defconfig .config 5. cp configs/arm-defconfig .config
or
cp configs/arm7tdmi-defconfig-4.3.3 .config (Last tested with this toolchain)
6. make oldconfig 6. make oldconfig
@@ -153,5 +155,17 @@ GENERAL STEPS:
type 'set debug remote 1' to enable tracing of gdb protocol (if required) type 'set debug remote 1' to enable tracing of gdb protocol (if required)
type 'target remote localhost:3333' to connect to the target type 'target remote localhost:3333' to connect to the target
The same commands from the telnet interface can now be accessed through the The same commands from the telnet interface can now be accessed through the
'monitor' command, e.g. 'monitor help' 'monitor' command, e.g. 'monitor help'
Configurations:
---------------
nsh:
Configures the NuttShell (nsh) located at examples/nsh. The
Configuration enables both the serial and telnetd NSH interfaces.
ostest:
This configuration directory, performs a simple OS test using
examples/ostest.
+119
View File
@@ -0,0 +1,119 @@
##############################################################################
# configs/olimex-strp711/nsh/Make.defs
#
# Copyright (C) 2009 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <spudmonkey@racsa.co.cr>
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name NuttX nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
##############################################################################
include ${TOPDIR}/.config
CROSSDEV = arm-elf-
CC = $(CROSSDEV)gcc
CPP = $(CROSSDEV)gcc -E
LD = $(CROSSDEV)ld
AR = $(CROSSDEV)ar rcs
NM = $(CROSSDEV)nm
OBJCOPY = $(CROSSDEV)objcopy
OBJDUMP = $(CROSSDEV)objdump
HOSTOS = ${shell uname -o}
ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'}
ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1}
ifeq ($(ARCHCCMAJOR),4)
ifneq ($(HOSTOS),Cygwin)
OBJCOPYARGS = -R .note -R .note.gnu.build-id -R .comment
endif
endif
ifeq ("${CONFIG_DEBUG}","y")
ARCHOPTIMIZATION = -g
else
ARCHOPTIMIZATION = -Os -fno-strict-aliasing -fno-strength-reduce \
-fomit-frame-pointer
endif
ifeq ($(ARCHCCMAJOR),4)
ARCHCPUFLAGS = -mcpu=arm7tdmi -mfloat-abi=soft -fno-builtin
else
ARCHCPUFLAGS = -mapcs-32 -mcpu=arm7tdmi -msoft-float -fno-builtin
endif
ARCHPICFLAGS = -fpic
ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow
ARCHDEFINES =
ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/nsh/ld.script
CFLAGS = $(ARCHWARNINGS) $(ARCHOPTIMIZATION) \
$(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) -pipe
CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES)
AFLAGS = $(CFLAGS) -D__ASSEMBLY__
OBJEXT = .o
LIBEXT = .a
EXEEXT =
ifeq ("${CONFIG_DEBUG}","y")
LDFLAGS += -g
endif
define PREPROCESS
@echo "CPP: $1->$2"
@$(CPP) $(CPPFLAGS) $1 -o $2
endef
define COMPILE
@echo "CC: $1"
@$(CC) -c $(CFLAGS) $1 -o $2
endef
define ASSEMBLE
@echo "AS: $1"
@$(CC) -c $(AFLAGS) $1 -o $2
endef
define ARCHIVE
echo "AR: $2"; \
$(AR) $1 $2 || { echo "$(AR) $1 $2 FAILED!" ; exit 1 ; }
endef
define CLEAN
@rm -f *.o *.a
endef
MKDEP = $(TOPDIR)/tools/mkdeps.sh
HOSTCC = gcc
HOSTINCLUDES = -I.
HOSTCFLAGS = -Wall -wstrict-prototypes -Wshadow -g -pipe
HOSTLDFLAGS =
File diff suppressed because it is too large Load Diff
+107
View File
@@ -0,0 +1,107 @@
/****************************************************************************
* configs/olimex-strp711/nsh/ld.script
*
* Copyright (C) 2009 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/* The str71x has 256Kb of non-volatile memory beginning at address
* 0x4000:0000 for program storage (Bank0, an addition 16Kb is available
* for data storage in Bank1). The OS entry point is via the reset vector
* at address 0x00000000 where the FLASH is remapped at reset.
*
* The str71x has 64Kb of on-chip static RAM beginning at address
* 0x2000:0000. The .data section will be relocated from _eronly
* to _sdata at boot time.
*/
/* The STR711 has 256Kb of FLASH beginning at address 0x4000:0000 and 64Kb
* of SRAM beginning at address 0x2000:0000
*/
MEMORY
{
flash (rx) : ORIGIN = 0x40000000, LENGTH = 256K
sram (rwx) : ORIGIN = 0x20000000, LENGTH = 64K
}
OUTPUT_ARCH(arm)
ENTRY(_stext)
SECTIONS
{
.text : {
_stext = ABSOLUTE(.);
*(.vectors)
*(.text)
*(.fixup)
*(.gnu.warning)
*(.rodata)
*(.rodata.str1.*)
*(.glue_7)
*(.glue_7t)
*(.got) /* Global offset table */
_etext = ABSOLUTE(.);
} > flash
/* This is where the .data section is relocated for execution out
* FLASH. The .data section will be relocated from _eronly
* to _sdata at boot time.
*/
_eronly = ABSOLUTE(.);
.data : {
_sdata = ABSOLUTE(.);
*(.data)
CONSTRUCTORS
_edata = ABSOLUTE(.);
} > sram AT > flash
.bss : { /* BSS */
_sbss = ABSOLUTE(.);
*(.bss)
*(COMMON)
_ebss = ABSOLUTE(.);
} > sram
/* Stabs debugging sections. */
.stab 0 : { *(.stab) }
.stabstr 0 : { *(.stabstr) }
.stab.excl 0 : { *(.stab.excl) }
.stab.exclstr 0 : { *(.stab.exclstr) }
.stab.index 0 : { *(.stab.index) }
.stab.indexstr 0 : { *(.stab.indexstr) }
.comment 0 : { *(.comment) }
.debug_abbrev 0 : { *(.debug_abbrev) }
.debug_info 0 : { *(.debug_info) }
.debug_line 0 : { *(.debug_line) }
.debug_pubnames 0 : { *(.debug_pubnames) }
.debug_aranges 0 : { *(.debug_aranges) }
}
+47
View File
@@ -0,0 +1,47 @@
#!/bin/bash
# configs/olimex-strp711/nsh/setenv.sh
#
# Copyright (C) 2008 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <spudmonkey@racsa.co.cr>
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name NuttX nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
if [ "$(basename $0)" = "setenv.sh" ] ; then
echo "You must source this script, not run it!" 1>&2
exit 1
fi
if [ -z ${PATH_ORIG} ]; then export PATH_ORIG=${PATH}; fi
WD=`pwd`
export BUILDROOT_BIN=${WD}/../buildroot/build_arm_nofpu/staging_dir/bin
export STR41XSCRIPTS=$WD/configs/olimex-strp711/scripts
export PATH=${BUILDROOT_BIN}:${STR41XSCRIPTS}:/sbin:/usr/sbin:${PATH_ORIG}
echo "PATH : ${PATH}"