diff --git a/configs/hymini-stm32v/README.txt b/configs/hymini-stm32v/README.txt index 2a804a43a69..7fec3b1562c 100644 --- a/configs/hymini-stm32v/README.txt +++ b/configs/hymini-stm32v/README.txt @@ -591,7 +591,6 @@ Where is one of the following: Built-in None apps/examples/nx Apps apps/examples/nxhello apps/system/usbmsc (4) - apps/examples/buttons apps/examples/nximage =========== ======================= ================================ diff --git a/configs/open1788/README.txt b/configs/open1788/README.txt index b7419b33aad..b8604d6346a 100644 --- a/configs/open1788/README.txt +++ b/configs/open1788/README.txt @@ -467,32 +467,6 @@ CONFIGURATION CONFIG_DEBUG_INFO=y CONFIG_DEBUG_INPUT=y - 7. The button test (apps/examples/buttons) can be built-in by adding - the following options. See apps/examples/README.txt for further - information about the button test. - - System Type: - CONFIG_LPC17_GPIOIRQ=y - - Board Selection: - CONFIG_ARCH_BUTTONS=y - CONFIG_ARCH_IRQBUTTONS=y - - Application Configuration: - CONFIG_EXAMPLES_BUTTONS=y - CONFIG_EXAMPLES_BUTTONS_MIN=0 - CONFIG_EXAMPLES_BUTTONS_MAX=7 - CONFIG_EXAMPLES_IRQBUTTONS_MIN=1 - CONFIG_EXAMPLES_IRQBUTTONS_MAX=7 - CONFIG_EXAMPLES_BUTTONS_NAME0="USER1" - CONFIG_EXAMPLES_BUTTONS_NAME1="USER2" - CONFIG_EXAMPLES_BUTTONS_NAME2="USER3" - CONFIG_EXAMPLES_BUTTONS_NAME3="JOYSTICK_A" - CONFIG_EXAMPLES_BUTTONS_NAME4="JOYSTICK_B" - CONFIG_EXAMPLES_BUTTONS_NAME5="JOYSTICK_C" - CONFIG_EXAMPLES_BUTTONS_NAME6="JOYSTICK_D" - CONFIG_EXAMPLES_BUTTONS_NAME7="JOYSTICK_CTR" - nxlines ------- Configures the graphics example located at examples/nsh. This diff --git a/configs/same70-xplained/README.txt b/configs/same70-xplained/README.txt index 6f84f024fa6..7d31d20e9d5 100644 --- a/configs/same70-xplained/README.txt +++ b/configs/same70-xplained/README.txt @@ -1363,36 +1363,7 @@ Configuration sub-directories RAMTest: Address-in-address test: 70000000 2097152 nsh> - 5. The button test at apps/examples/buttons is included in the - configuration. This configuration illustrates (1) use of the buttons - on the evaluation board, and (2) the use of PIO interrupts. Example - usage: - - NuttShell (NSH) NuttX-7.8 - nsh> help - help usage: help [-v] [] - ... - Builtin Apps: - buttons - nsh> buttons 3 - maxbuttons: 3 - Attached handler at 4078f7 to button 0 [SW0], oldhandler:0 - Attached handler at 4078e9 to button 1 [SW1], oldhandler:0 - IRQ:125 Button 1:SW1 SET:00: - SW1 released - IRQ:125 Button 1:SW1 SET:02: - SW1 depressed - IRQ:125 Button 1:SW1 SET:00: - SW1 released - IRQ:90 Button 0:SW0 SET:01: - SW0 depressed - IRQ:90 Button 0:SW0 SET:00: - SW0 released - IRQ:125 Button 1:SW1 SET:02: - SW1 depressed - nsh> - - 6. TWI/I2C + 5. TWI/I2C TWIHS0 is enabled in this configuration. The SAM E70 Xplained supports one device on the one on-board I2C device on the TWIHS0 bus: @@ -1464,11 +1435,11 @@ Configuration sub-directories 0x5f are the addresses of the AT24 EEPROM (I am not sure what the other address, 0x37, is as this writing). - 7. TWIHS0 is also used to support 256 byte non-volatile storage for + 6. TWIHS0 is also used to support 256 byte non-volatile storage for configuration data using the MTD configuration as described above under the heading, "MTD Configuration Data". - 8. Support for HSMCI is built-in by default. The SAME70-XPLD provides + 7. Support for HSMCI is built-in by default. The SAME70-XPLD provides one full-size SD memory card slot. Refer to the section entitled "SD card" for configuration-related information. @@ -1477,7 +1448,7 @@ Configuration sub-directories The auto-mounter is not enabled. See the section above entitled "Auto-Mounter". - 9. Performance-related Configuration settings: + 8. Performance-related Configuration settings: CONFIG_ARMV7M_ICACHE=y : Instruction cache is enabled CONFIG_ARMV7M_DCACHE=y : Data cache is enabled diff --git a/configs/samv71-xult/README.txt b/configs/samv71-xult/README.txt index d51f23dfe17..f84223d5b88 100644 --- a/configs/samv71-xult/README.txt +++ b/configs/samv71-xult/README.txt @@ -2053,36 +2053,7 @@ Configuration sub-directories RAMTest: Address-in-address test: 70000000 2097152 nsh> - 5. The button test at apps/examples/buttons is included in the - configuration. This configuration illustrates (1) use of the buttons - on the evaluation board, and (2) the use of PIO interrupts. Example - usage: - - NuttShell (NSH) NuttX-7.8 - nsh> help - help usage: help [-v] [] - ... - Builtin Apps: - buttons - nsh> buttons 3 - maxbuttons: 3 - Attached handler at 4078f7 to button 0 [SW0], oldhandler:0 - Attached handler at 4078e9 to button 1 [SW1], oldhandler:0 - IRQ:125 Button 1:SW1 SET:00: - SW1 released - IRQ:125 Button 1:SW1 SET:02: - SW1 depressed - IRQ:125 Button 1:SW1 SET:00: - SW1 released - IRQ:90 Button 0:SW0 SET:01: - SW0 depressed - IRQ:90 Button 0:SW0 SET:00: - SW0 released - IRQ:125 Button 1:SW1 SET:02: - SW1 depressed - nsh> - - 6. TWI/I2C + 5. TWI/I2C TWIHS0 is enabled in this configuration. The SAM V71 Xplained Ultra supports two devices on the one on-board I2C device on the TWIHS0 bus: @@ -2159,11 +2130,11 @@ Configuration sub-directories the AT2 EEPROM (I am not sure what the other address, 0x37, is as this writing). - 7. TWIHS0 is also used to support 256 byte non-volatile storage for + 6. TWIHS0 is also used to support 256 byte non-volatile storage for configuration data using the MTD configuration as described above under the heading, "MTD Configuration Data". - 8. Support for HSMCI is built-in by default. The SAMV71-XULT provides + 7. Support for HSMCI is built-in by default. The SAMV71-XULT provides one full-size SD memory card slot. Refer to the section entitled "SD card" for configuration-related information. @@ -2172,7 +2143,7 @@ Configuration sub-directories The auto-mounter is not enabled. See the section above entitled "Auto-Mounter". - 9. Performance-related Configuration settings: + 8. Performance-related Configuration settings: CONFIG_ARMV7M_ICACHE=y : Instruction cache is enabled CONFIG_ARMV7M_DCACHE=y : Data cache is enabled