@@ -254,6 +254,8 @@ nuttx/
| | `- README.txt
| |- pic32mz-starterkit/
| | `- README.txt
+ | |- pnev5180b/
+ | | `- README.txt
| |- qemu-i486/
| | `- README.txt
| |- sabre-6quad/
diff --git a/README.txt b/README.txt
index 90738b22b49..68a12c5fc5e 100644
--- a/README.txt
+++ b/README.txt
@@ -1927,6 +1927,8 @@ nuttx/
| | `- README.txt
| |- pic32mz-starterkit/
| | `- README.txt
+ | |- pnev5180b/
+ | | `- README.txt
| |- qemu-i486/
| | `- README.txt
| |- sabre-6quad/
diff --git a/configs/Kconfig b/configs/Kconfig
index 11c4c4ba137..783391822f1 100644
--- a/configs/Kconfig
+++ b/configs/Kconfig
@@ -1304,6 +1304,14 @@ config ARCH_BOARD_PHOTON
(https://www.particle.io). This board features the STM32F205RGY6
MCU from STMicro.
+config ARCH_BOARD_PNEV5180B
+ bool "NXP PNEV5180B NFC Frontend Development Kit"
+ depends on ARCH_CHIP_LPC1769
+ select ARCH_HAVE_LEDS
+ ---help---
+ NXP Semiconductors' PN5180 NFC Frontend Development Kit. This board is
+ based on the NXP LPC1769 MCU.
+
config ARCH_BOARD_STM32_BUTTERFLY2
bool "Kamami STM32Butterfly2 development board"
depends on ARCH_CHIP_STM32F107VC
@@ -1957,6 +1965,7 @@ config ARCH_BOARD
default "shenzhou" if ARCH_BOARD_SHENZHOU
default "skp16c26" if ARCH_BOARD_SKP16C26
default "photon" if ARCH_BOARD_PHOTON
+ default "pnev5180b" if ARCH_BOARD_PNEV5180B
default "stm32butterfly2" if ARCH_BOARD_STM32_BUTTERFLY2
default "stm32_tiny" if ARCH_BOARD_STM32_TINY
default "stm32f051-discovery" if ARCH_BOARD_STM32F051_DISCOVERY
@@ -2412,6 +2421,9 @@ endif
if ARCH_BOARD_PHOTON
source "configs/photon/Kconfig"
endif
+if ARCH_BOARD_PNEV5180B
+source "configs/pnev5180b/Kconfig"
+endif
if ARCH_BOARD_STM32_BUTTERFLY2
source "configs/stm32butterfly2/Kconfig"
endif
diff --git a/configs/README.txt b/configs/README.txt
index af3740039a2..2e94e3f80f9 100644
--- a/configs/README.txt
+++ b/configs/README.txt
@@ -607,6 +607,10 @@ configs/pic32mz-starterkit
See www.microchip.com for further information.
+configs/pnev5180b
+ NXP Semiconductors' PN5180 NFC Frontend Development Kit. This board is
+ based on the NXP LPC1769 MCU.
+
configs/qemu-i486
Port of NuttX to QEMU in i486 mode. This port will also run on real i486
hardwared (Google the Bifferboard).
diff --git a/configs/pnev5180b/Kconfig b/configs/pnev5180b/Kconfig
new file mode 100644
index 00000000000..1373424d53e
--- /dev/null
+++ b/configs/pnev5180b/Kconfig
@@ -0,0 +1,7 @@
+#
+# For a description of the syntax of this configuration file,
+# see the file kconfig-language.txt in the NuttX tools repository.
+#
+
+if ARCH_BOARD_PNEV5180B
+endif
diff --git a/configs/pnev5180b/README.txt b/configs/pnev5180b/README.txt
new file mode 100644
index 00000000000..cc2cf1f3333
--- /dev/null
+++ b/configs/pnev5180b/README.txt
@@ -0,0 +1,100 @@
+README
+^^^^^^
+
+README for NuttX port to NXP's PNEV5180B, which is a development board
+containing a NXP-LPC1769 MCU and a PN5180 NFC Frontend.
+
+Contents
+^^^^^^^^
+
+ NXP's PNEV5180B Board
+ Configurations
+
+NXP's PNEV5180B Board
+^^^^^^^^^^^^^^^^^^^^^
+
+ Pin Description On Board Connector
+ -------------------------------- ---------------- -------------
+ P0.2/TXD0/AD0.7 TX J201
+ P0.3/RXD0/AD0.6 RX
+ P0.22/RTS1/TD1 LD200 ORANGE LED
+ P0.15/TXD1/SCK0/SCK PN5180-SCK
+ P0.16/RXD1/SSEL0/SSEL PN5180-SSEL PN5180
+ P0.17/CTS1/MISO0/MISO PN5180-MISO
+ P0.18/DCD1/M0SI0/MOSI PN5180-MOSI
+ P0.19/DSR1/SDA1 EEPROM (Not Assembled)
+ P0.20/DTR1/SCL1 EEPROM
+ P0.21/RI1/RD1 PN5180-AUX2 PN5180
+ P0.29/USB_D+ USB-D+ USB
+ P0.30/USB_D- USB-D-
+ P2.0/PWM1.1/TXD1 LD201 RED LED
+ P2.5/PWM1.6/DTR1/TRACEDATA0 PN5180-nPN_RST
+ P2.9/USB_CONNECT/RXD2 USB_CONNECT USB
+ P2.11/nEINT1/I2STX_CLK PN5180-BUSY PN5180
+ P2.12/nEINT2/I2STX_WS PN5180-IRQ
+ P3.25/MAT0.0/PWM1.2 LD203 GREEN LED
+ P3.26/STCLK/MAT0.1/PWM1.3 LD202 BLUE LED
+
+NXP's PNEV5180B Board
+^^^^^^^^^^^^^^^^^^^^^
+
+UART
+----
+
+ Board LPC1769
+ Signal Pin
+ ----------------- -----------------
+ TX P0.2 TXD0
+ RX P0.3 RXD0
+
+USB
+---
+
+ Board LPC1769
+ Signal Pin
+ ----------------- -----------------
+ USB_CONNECT P2.9 USB_CONNECT
+ USB_DM P0.29 USB_D-
+ USB_DP P0.30 USB_D+
+
+PN5180
+------
+
+ Board LPC1769
+ Signal Pin
+ ----------------- -----------------
+ PN5180_SCK P0.15 SCK
+ PN5180_SSEL P0.16 SSEL
+ PN5180_MISO P0.17 MISO
+ PN5180_MOSI P0.18 MOSI
+ PN5180_AUX2 P0.21 GPIO I
+ PN5180_nPN_RST P2.5 GPIO O
+ PN5180_BUSY P2.11 GPIO I
+ PN5180_IRQ P2.12 GPIO I
+
+Configurations
+^^^^^^^^^^^^^^
+
+Each PNEV5180B configuration is maintained in a sub-directory and can be
+selected as follow:
+
+ cd tools
+ ./configure.sh pnev5180b/
+ cd -
+
+Where is one of the following:
+
+ nsh:
+ Configures the NuttShell (nsh) located at apps/examples/nsh. The
+ Configuration enables the serial NSH interface.
+
+ NOTES:
+
+ 1. This configuration uses the mconf-based configuration tool. To
+ change this configurations using that tool, you should:
+
+ a. Build and install the kconfig-mconf tool. See nuttx/README.txt
+ see additional README.txt files in the NuttX tools repository.
+
+ b. Execute 'make menuconfig' in nuttx/ in order to start the
+ reconfiguration process.
diff --git a/configs/pnev5180b/include/board.h b/configs/pnev5180b/include/board.h
new file mode 100644
index 00000000000..c9aebbb6e99
--- /dev/null
+++ b/configs/pnev5180b/include/board.h
@@ -0,0 +1,237 @@
+/****************************************************************************
+ * configs/pnev5180b/include/board.h
+ * include/arch/board/board.h
+ *
+ * Copyright (C) 2019 Gregory Nutt. All rights reserved.
+ * Author: Michael Jung
+ *
+ * Based on configs/zkit-arm-1769/include/board.h
+ * Copyright (C) 2013 Zilogic Systems. All rights reserved.
+ * Author: BabuSubashChandar
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ * used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ *****************************************************************************/
+
+#ifndef __CONFIGS_PNEV5180B_INCLUDE_BOARD_H
+#define __CONFIGS_PNEV5180B_INCLUDE_BOARD_H
+
+/*****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include
+
+#include
+
+#if defined(CONFIG_ARCH_IRQBUTTONS) && defined(CONFIG_LPC17_GPIOIRQ)
+# include
+#endif
+
+/*****************************************************************************
+ * Pre-processor Definitions
+ *****************************************************************************/
+
+/* Clocking ******************************************************************/
+
+/* NOTE: The following definitions require lpc17_syscon.h. It is not
+ * included here because the including C file may not have that file in its
+ * include path.
+ */
+
+#define BOARD_XTAL_FREQUENCY (12000000) /* XTAL oscillator frequency */
+#define BOARD_OSCCLK_FREQUENCY BOARD_XTAL_FREQUENCY /* Main oscillator frequency */
+#define BOARD_RTCCLK_FREQUENCY (32768) /* RTC oscillator frequency */
+#define BOARD_INTRCOSC_FREQUENCY (4000000) /* Internal RC oscillator frequency */
+
+/* This is the clock setup we configure for:
+ *
+ * SYSCLK = BOARD_OSCCLK_FREQUENCY = 12MHz -> Select Main oscillator for
+ * source
+ * PLL0CLK = (2 * 20 * SYSCLK) / 1 = 480MHz -> PLL0 multipler=20,
+ * pre-divider=1
+ * CCLCK = 480MHz / 4 = 120MHz -> CCLK divider = 4
+ */
+
+#define LPC17_CCLK 120000000 /* 120Mhz */
+
+/* Select the main oscillator as the frequency source. SYSCLK is then the
+ * frequency of the main oscillator.
+ */
+
+#undef CONFIG_LPC17_MAINOSC
+#define CONFIG_LPC17_MAINOSC 1
+#define BOARD_SCS_VALUE SYSCON_SCS_OSCEN
+
+/* Select the main oscillator and CCLK divider. The output of the divider is
+ * CCLK. The input to the divider (PLLCLK) will be determined by the PLL
+ * output.
+ */
+
+#define BOARD_CCLKCFG_DIVIDER 4
+#define BOARD_CCLKCFG_VALUE ((BOARD_CCLKCFG_DIVIDER-1) << SYSCON_CCLKCFG_SHIFT)
+
+/* PLL0. PLL0 is used to generate the CPU clock divider input (PLLCLK).
+ *
+ * Source clock: Main oscillator
+ * PLL0 Multiplier value (M): 20
+ * PLL0 Pre-divider value (N): 1
+ *
+ * PLL0CLK = (2 * 20 * SYSCLK) / 1 = 480MHz
+ */
+
+#undef CONFIG_LPC17_PLL0
+#define CONFIG_LPC17_PLL0 1
+#define BOARD_CLKSRCSEL_VALUE SYSCON_CLKSRCSEL_MAIN
+
+#define BOARD_PLL0CFG_MSEL 20
+#define BOARD_PLL0CFG_NSEL 1
+#define BOARD_PLL0CFG_VALUE \
+ (((BOARD_PLL0CFG_MSEL-1) << SYSCON_PLL0CFG_MSEL_SHIFT) | \
+ ((BOARD_PLL0CFG_NSEL-1) << SYSCON_PLL0CFG_NSEL_SHIFT))
+
+/* PLL1 -- Not used. */
+
+#undef CONFIG_LPC17_PLL1
+#define BOARD_PLL1CFG_MSEL 36
+#define BOARD_PLL1CFG_NSEL 1
+#define BOARD_PLL1CFG_VALUE \
+ (((BOARD_PLL1CFG_MSEL-1) << SYSCON_PLL1CFG_MSEL_SHIFT) | \
+ ((BOARD_PLL1CFG_NSEL-1) << SYSCON_PLL1CFG_NSEL_SHIFT))
+
+/* USB divider. This divider is used when PLL1 is not enabled to get the
+ * USB clock from PLL0:
+ *
+ * USBCLK = PLL0CLK / 10 = 48MHz
+ */
+
+#define BOARD_USBCLKCFG_VALUE SYSCON_USBCLKCFG_DIV10
+
+/* FLASH Configuration */
+
+#undef CONFIG_LP17_FLASH
+#define CONFIG_LP17_FLASH 1
+#define BOARD_FLASHCFG_VALUE 0x0000403a
+
+/* LED definitions ***********************************************************/
+
+/* If CONFIG_ARCH_LEDs is defined, then NuttX will control the LEDs on the
+ * PNEV5180B board. The following definitions describe how NuttX controls the
+ * LEDs:
+ */
+ /* LD201 LD200 LD202 LD203 */
+ /* RED ORANGE BLUE GREEN */
+#define LED_STARTED 0 /* ON ON ON ON */
+#define LED_HEAPALLOCATE 1 /* OFF OFF OFF ON */
+#define LED_IRQSENABLED 2 /* OFF OFF ON OFF */
+#define LED_STACKCREATED 3 /* OFF OFF OFF OFF */
+#define LED_INIRQ 4 /* OFF OFF OFF ON (momentary) */
+#define LED_SIGNAL 5 /* OFF OFF ON OFF (momentary) */
+#define LED_ASSERTION 6 /* OFF ON OFF OFF (momentary) */
+#define LED_PANIC 7 /* ON OFF OFF OFF (1Hz flashing) */
+
+/* Alternate pin selections **************************************************/
+
+/* Pin Description On Board Connector
+ * -------------------------------- ---------------- -------------
+ * P0.2/TXD0/AD0.7 TX J201
+ * P0.3/RXD0/AD0.6 RX
+ * P0.22/RTS1/TD1 LD200 ORANGE LED
+ * P0.15/TXD1/SCK0/SCK PN5180-SCK
+ * P0.16/RXD1/SSEL0/SSEL PN5180-SSEL PN5180
+ * P0.17/CTS1/MISO0/MISO PN5180-MISO
+ * P0.18/DCD1/M0SI0/MOSI PN5180-MOSI
+ * P0.19/DSR1/SDA1 EEPROM (Not Assembled)
+ * P0.20/DTR1/SCL1 EEPROM
+ * P0.21/RI1/RD1 PN5180-AUX2 PN5180
+ * P0.29/USB_D+ USB-D+ USB
+ * P0.30/USB_D- USB-D-
+ * P2.0/PWM1.1/TXD1 LD201 RED LED
+ * P2.5/PWM1.6/DTR1/TRACEDATA0 PN5180-nPN_RST
+ * P2.9/USB_CONNECT/RXD2 USB_CONNECT USB
+ * P2.11/nEINT1/I2STX_CLK PN5180-BUSY PN5180
+ * P2.12/nEINT2/I2STX_WS PN5180-IRQ
+ * P3.25/MAT0.0/PWM1.2 LD203 GREEN LED
+ * P3.26/STCLK/MAT0.1/PWM1.3 LD202 BLUE LED
+ */
+
+/*****************************************************************************
+ * Public Types
+ *****************************************************************************/
+
+#ifndef __ASSEMBLY__
+
+/*****************************************************************************
+ * Public Data
+ *****************************************************************************/
+
+#undef EXTERN
+#if defined(__cplusplus)
+#define EXTERN extern "C"
+extern "C"
+{
+#else
+#define EXTERN extern
+#endif
+
+/*****************************************************************************
+ * Public Function Prototypes
+ *****************************************************************************/
+
+/*****************************************************************************
+ * Name: lpc17_boardinitialize
+ *
+ * Description:
+ * All LPC17xx architectures must provide the following entry point. This
+ * entry point is called early in the intitialization -- after all memory
+ * has been configured and mapped but before any devices have been
+ * initialized.
+ *
+ *****************************************************************************/
+
+void lpc17_boardinitialize(void);
+
+/*****************************************************************************
+ * Name: lpc17_led
+ *
+ * Description:
+ * Once the system has booted, these functions can be used to control LED 1
+ *
+ *****************************************************************************/
+
+#ifdef CONFIG_ARCH_LEDS
+void lpc17_led(int lednum, int state);
+#endif
+
+#undef EXTERN
+#if defined(__cplusplus)
+}
+#endif
+
+#endif /* __ASSEMBLY__ */
+#endif /* __CONFIGS_PNEV5180_INCLUDE_BOARD_H */
diff --git a/configs/pnev5180b/nsh/defconfig b/configs/pnev5180b/nsh/defconfig
new file mode 100644
index 00000000000..8ca77225835
--- /dev/null
+++ b/configs/pnev5180b/nsh/defconfig
@@ -0,0 +1,20 @@
+#
+# This file is autogenerated: PLEASE DO NOT EDIT IT.
+#
+# You can use "make menuconfig" to make any modifications to the installed .config file.
+# You can then do "make savedefconfig" to generate a new defconfig file that includes your
+# modifications.
+#
+CONFIG_ARCH="arm"
+CONFIG_ARCH_BOARD="pnev5180b"
+CONFIG_ARCH_BOARD_PNEV5180B=y
+CONFIG_ARCH_CHIP_LPC1769=y
+CONFIG_ARCH_CHIP_LPC17XX=y
+CONFIG_BOARD_LOOPSPERMSEC=11992
+CONFIG_LPC17_UART0=y
+CONFIG_MM_REGIONS=2
+CONFIG_RAM_SIZE=32768
+CONFIG_RAM_START=0x10000000
+CONFIG_SYSTEM_NSH=y
+CONFIG_UART0_SERIAL_CONSOLE=y
+CONFIG_USER_ENTRYPOINT="nsh_main"
diff --git a/configs/pnev5180b/scripts/Make.defs b/configs/pnev5180b/scripts/Make.defs
new file mode 100644
index 00000000000..d6af3ab2a0f
--- /dev/null
+++ b/configs/pnev5180b/scripts/Make.defs
@@ -0,0 +1,128 @@
+############################################################################
+# configs/pnev5180b/scripts/Make.defs
+#
+# Copyright (C) 2019 Gregory Nutt. All rights reserved.
+# Author: Michael Jung
+#
+# Based on configs/zkit-arm-1769/scripts/Make.defs
+#
+# Copyright (C) 2013 Zilogic Systems. All rights reserved.
+# Author: BabuSubashChandar
+# Manikandan
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+# used to endorse or promote products derived from this software
+# without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+
+include ${TOPDIR}/.config
+include ${TOPDIR}/tools/Config.mk
+include ${TOPDIR}/arch/arm/src/armv7-m/Toolchain.defs
+
+ifeq ($(WINTOOL),y)
+ # Windows-native toolchains
+ DIRLINK = $(TOPDIR)/tools/copydir.sh
+ DIRUNLINK = $(TOPDIR)/tools/unlink.sh
+ MKDEP = $(TOPDIR)/tools/mkwindeps.sh
+ ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
+ ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
+ ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/flash.ld}"
+ NXFLATLDSCRIPT = -T "${shell cygpath -w $(TOPDIR)/binfmt/libnxflat/gnu-nxflat-gotoff.ld}"
+else
+ # Linux/Cygwin-native toolchain
+ MKDEP = $(TOPDIR)/tools/mkdeps$(HOSTEXEEXT)
+ ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
+ ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
+ ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/flash.ld
+ NXFLATLDSCRIPT = -T"$(TOPDIR)/binfmt/libnxflat/gnu-nxflat-gotoff.ld"
+endif
+
+CC = $(CROSSDEV)gcc
+CXX = $(CROSSDEV)g++
+CPP = $(CROSSDEV)gcc -E
+LD = $(CROSSDEV)ld
+AR = $(CROSSDEV)ar rcs
+NM = $(CROSSDEV)nm
+OBJCOPY = $(CROSSDEV)objcopy
+OBJDUMP = $(CROSSDEV)objdump
+
+MKNXFLAT = mknxflat
+LDNXFLAT = ldnxflat
+
+ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'}
+ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1}
+
+ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
+ ARCHOPTIMIZATION = -g
+endif
+
+ifneq ($(CONFIG_DEBUG_NOOPT),y)
+ ARCHOPTIMIZATION += $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer
+endif
+
+# enable precise stack overflow tracking
+ifeq ($(CONFIG_ARMV7M_STACKCHECK),y)
+ INSTRUMENTATIONDEFINES = -finstrument-functions -ffixed-r10
+endif
+
+ARCHCFLAGS = -fno-builtin
+ARCHCXXFLAGS = -fno-builtin -fno-exceptions -fcheck-new
+ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow -Wundef
+ARCHWARNINGSXX = -Wall -Wshadow -Wundef
+ARCHDEFINES =
+ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10
+
+CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) $(INSTRUMENTATIONDEFINES) -pipe
+CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
+CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) $(INSTRUMENTATIONDEFINES) -pipe
+CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
+CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES)
+AFLAGS = $(CFLAGS) -D__ASSEMBLY__
+
+NXFLATLDFLAGS1 = -r -d -warn-common
+NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) $(NXFLATLDSCRIPT) -no-check-sections
+LDNXFLATFLAGS = -e main -s 2048
+
+ASMEXT = .S
+OBJEXT = .o
+LIBEXT = .a
+EXEEXT =
+
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
+ifneq ($(CROSSDEV),arm-nuttx-eabi-)
+ LDFLAGS += -nostartfiles -nodefaultlibs
+endif
+endif
+
+ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
+ LDFLAGS += -g
+endif
+
+HOSTCC = gcc
+HOSTINCLUDES = -I.
+HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -Wundef -g -pipe
+HOSTLDFLAGS =
diff --git a/configs/pnev5180b/scripts/flash.ld b/configs/pnev5180b/scripts/flash.ld
new file mode 100644
index 00000000000..7f471c36dfc
--- /dev/null
+++ b/configs/pnev5180b/scripts/flash.ld
@@ -0,0 +1,115 @@
+/*****************************************************************************
+ * configs/pnev5180b/scripts/flash.ld
+ *
+ * Copyright (C) 2019 Gregory Nutt. All rights reserved.
+ * Author: Michael Jung
+ *
+ * Based on configs/zkit-arm-1769/scripts/flash.ld
+ *
+ * Copyright (C) 2013 Zilogic Systems. All rights reserved.
+ * Author: BabuSubashChandar
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ * used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ *****************************************************************************/
+
+/* The LPC1769 has 512Kb of FLASH beginning at address 0x0000:0000 and
+ * 64Kb of total SRAM: 32Kb of SRAM in the CPU block beginning at address
+ * 0x10000000 and 32Kb of AHB SRAM in two banks of 16Kb beginning at addresses
+ * 0x20070000 and 0x20080000. Here we assume that .data and .bss will all fit
+ * into the 32Kb CPU SRAM address range.
+ */
+
+MEMORY
+{
+ flash (rx) : ORIGIN = 0x00000000, LENGTH = 512K
+ sram (rwx) : ORIGIN = 0x10000000, LENGTH = 32K
+}
+
+OUTPUT_ARCH(arm)
+ENTRY(_stext)
+SECTIONS
+{
+ .text : {
+ _stext = ABSOLUTE(.);
+ *(.vectors)
+ *(.text .text.*)
+ *(.fixup)
+ *(.gnu.warning)
+ *(.rodata .rodata.*)
+ *(.gnu.linkonce.t.*)
+ *(.glue_7)
+ *(.glue_7t)
+ *(.got)
+ *(.gcc_except_table)
+ *(.gnu.linkonce.r.*)
+ _etext = ABSOLUTE(.);
+ } > flash
+
+ _eronly = ABSOLUTE(.);
+
+ .data : {
+ _sdata = ABSOLUTE(.);
+ *(.data .data.*)
+ *(.gnu.linkonce.d.*)
+ CONSTRUCTORS
+ _edata = ABSOLUTE(.);
+ } > sram AT > flash
+
+ .ARM.extab : {
+ *(.ARM.extab*)
+ } >sram
+
+ __exidx_start = ABSOLUTE(.);
+ .ARM.exidx : {
+ *(.ARM.exidx*)
+ } >sram
+ __exidx_end = ABSOLUTE(.);
+
+ .bss : {
+ _sbss = ABSOLUTE(.);
+ *(.bss .bss.*)
+ *(.gnu.linkonce.b.*)
+ *(COMMON)
+ _ebss = ABSOLUTE(.);
+ } > sram
+
+ /* Stabs debugging sections. */
+ .stab 0 : { *(.stab) }
+ .stabstr 0 : { *(.stabstr) }
+ .stab.excl 0 : { *(.stab.excl) }
+ .stab.exclstr 0 : { *(.stab.exclstr) }
+ .stab.index 0 : { *(.stab.index) }
+ .stab.indexstr 0 : { *(.stab.indexstr) }
+ .comment 0 : { *(.comment) }
+ .debug_abbrev 0 : { *(.debug_abbrev) }
+ .debug_info 0 : { *(.debug_info) }
+ .debug_line 0 : { *(.debug_line) }
+ .debug_pubnames 0 : { *(.debug_pubnames) }
+ .debug_aranges 0 : { *(.debug_aranges) }
+}
diff --git a/configs/pnev5180b/src/.gitignore b/configs/pnev5180b/src/.gitignore
new file mode 100644
index 00000000000..726d936e1e3
--- /dev/null
+++ b/configs/pnev5180b/src/.gitignore
@@ -0,0 +1,2 @@
+/.depend
+/Make.dep
diff --git a/configs/pnev5180b/src/Makefile b/configs/pnev5180b/src/Makefile
new file mode 100644
index 00000000000..cb3ddf87e88
--- /dev/null
+++ b/configs/pnev5180b/src/Makefile
@@ -0,0 +1,65 @@
+##############################################################################
+# configs/pnev5180b/src/Makefile
+#
+# Copyright (C) 2019 Gregory Nutt. All rights reserved.
+# Author: Michael Jung
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+# used to endorse or promote products derived from this software
+# without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+##############################################################################
+
+-include $(TOPDIR)/Make.defs
+
+ASRCS =
+CSRCS = lpc17_boot.c lpc17_bringup.c
+
+ifeq ($(CONFIG_ARCH_LEDS),y)
+CSRCS += lpc17_leds.c
+endif
+
+ifeq ($(CONFIG_LIB_BOARDCTL),y)
+CSRCS += lpc17_appinit.c
+endif
+
+ifeq ($(CONFIG_USBDEV_COMPOSITE),y)
+CSRCS += lpc17_composite.c
+endif
+
+ifeq ($(CONFIG_LPC17_SPI),y)
+CSRCS += lpc17_spi.c
+endif
+
+ifeq ($(CONFIG_ELF),y)
+CSRCS += lpc17_symtab.c
+endif
+
+ifeq ($(CONFIG_NXFLAT),y)
+CSRCS += lpc17_symtab.c
+endif
+
+include $(TOPDIR)/configs/Board.mk
diff --git a/configs/pnev5180b/src/lpc17_appinit.c b/configs/pnev5180b/src/lpc17_appinit.c
new file mode 100644
index 00000000000..34057b49fb1
--- /dev/null
+++ b/configs/pnev5180b/src/lpc17_appinit.c
@@ -0,0 +1,94 @@
+/*****************************************************************************
+ * config/pnev5180b/src/lpc17_appinit.c
+ *
+ * Copyright (C) 2019 Gregory Nutt. All rights reserved.
+ * Author: Michael Jung
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ * used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ *****************************************************************************/
+
+/*****************************************************************************
+ * Included Files
+ *****************************************************************************/
+
+#include
+
+#include
+
+#include "pnev5180b.h"
+
+/****************************************************************************
+ * Pre-processor Definitions
+ ****************************************************************************/
+
+#ifndef OK
+# define OK 0
+#endif
+
+/*****************************************************************************
+ * Public Functions
+ *****************************************************************************/
+
+/****************************************************************************
+ * Name: board_app_initialize
+ *
+ * Description:
+ * Perform application specific initialization. This function is never
+ * called directly from application code, but only indirectly via the
+ * (non-standard) boardctl() interface using the command BOARDIOC_INIT.
+ *
+ * Input Parameters:
+ * arg - The boardctl() argument is passed to the board_app_initialize()
+ * implementation without modification. The argument has no
+ * meaning to NuttX; the meaning of the argument is a contract
+ * between the board-specific initialization logic and the
+ * matching application logic. The value cold be such things as a
+ * mode enumeration value, a set of DIP switch switch settings, a
+ * pointer to configuration data read from a file or serial FLASH,
+ * or whatever you would like to do with it. Every implementation
+ * should accept zero/NULL as a default configuration.
+ *
+ * Returned Value:
+ * Zero (OK) is returned on success; a negated errno value is returned on
+ * any failure to indicate the nature of the failure.
+ *
+ ****************************************************************************/
+
+int board_app_initialize(uintptr_t arg)
+{
+#ifdef CONFIG_BOARD_LATE_INITIALIZE
+ /* Board initialization already performed by board_late_initialize() */
+
+ return OK;
+#else
+ /* Perform board-specific initialization */
+
+ return pnev5180b_bringup();
+#endif
+}
diff --git a/configs/pnev5180b/src/lpc17_boot.c b/configs/pnev5180b/src/lpc17_boot.c
new file mode 100644
index 00000000000..cf9284abddf
--- /dev/null
+++ b/configs/pnev5180b/src/lpc17_boot.c
@@ -0,0 +1,96 @@
+/*****************************************************************************
+ * configs/pnev5180b/src/lpc17_boot.c
+ *
+ * Copyright (C) 2019 Gregory Nutt. All rights reserved.
+ * Author: Michael Jung
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ * used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ *****************************************************************************/
+
+/*****************************************************************************
+ * Included Files
+ *****************************************************************************/
+
+#include
+
+#include
+
+#include
+#include
+
+#include "up_arch.h"
+#include "up_internal.h"
+
+#include "pnev5180b.h"
+
+/*****************************************************************************
+ * Public Functions
+ *****************************************************************************/
+
+/*****************************************************************************
+ * Name: lpc17_boardinitialize
+ *
+ * Description:
+ * All LPC17xx architectures must provide the following entry point. This
+ * entry point is called early in the initialization -- after all memory
+ * has been configured and mapped but before any devices have been
+ * initialized.
+ *
+ *****************************************************************************/
+
+void lpc17_boardinitialize(void)
+{
+#ifdef CONFIG_ARCH_LEDS
+ /* Configure on-board LEDs if LED support has been selected. */
+
+ pnev5180b_autoled_initialize();
+#endif
+}
+
+/****************************************************************************
+ * Name: board_late_initialize
+ *
+ * Description:
+ * If CONFIG_BOARD_LATE_INITIALIZE is selected, then an additional
+ * initialization call will be performed in the boot-up sequence to a
+ * function called board_late_initialize(). board_late_initialize() will be
+ * called immediately after up_initialize() is called and just before the
+ * initial application is started. This additional initialization phase
+ * may be used, for example, to initialize board-specific device drivers.
+ *
+ ****************************************************************************/
+
+#ifdef CONFIG_BOARD_LATE_INITIALIZE
+void board_late_initialize(void)
+{
+ /* Perform board-specific initialization */
+
+ (void)pnev5180b_bringup();
+}
+#endif
diff --git a/configs/pnev5180b/src/lpc17_composite.c b/configs/pnev5180b/src/lpc17_composite.c
new file mode 100644
index 00000000000..ec8ead6929b
--- /dev/null
+++ b/configs/pnev5180b/src/lpc17_composite.c
@@ -0,0 +1,148 @@
+/*****************************************************************************
+ * configs/pnev5180b/src/lpc17_composite.c
+ *
+ * Copyright (C) 2019 Gregory Nutt. All rights reserved.
+ * Author: Michael Jung
+ *
+ * Configure and register CDC-ACM and CDC-ECM
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ * used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ *****************************************************************************/
+
+/*****************************************************************************
+ * Included Files
+ *****************************************************************************/
+
+#include
+
+#include
+#include
+
+#include
+#include
+#include
+
+#if defined(CONFIG_BOARDCTL_USBDEVCTRL) && defined(CONFIG_USBDEV_COMPOSITE)
+
+/*****************************************************************************
+ * Public Functions
+ *****************************************************************************/
+
+/*****************************************************************************
+ * Name: board_composite_initialize
+ *
+ * Description:
+ * Perform architecture specific initialization of a composite USB device.
+ *
+ *****************************************************************************/
+
+int board_composite_initialize(int port)
+{
+ syslog(LOG_INFO, "board_composite_initialize(port: %d)\n", port);
+
+ return OK;
+}
+
+/*****************************************************************************
+ * Name: board_composite_connect
+ *
+ * Description:
+ * Connect the USB composite device on the specified USB device port using
+ * the specified configuration. The interpretation of the configid is
+ * board specific.
+ *
+ * Input Parameters:
+ * port - The USB device port.
+ * configid - The USB composite configuration
+ *
+ * Returned Value:
+ * A non-NULL handle value is returned on success. NULL is returned on
+ * any failure.
+ *
+ *****************************************************************************/
+
+FAR void *board_composite_connect(int port, int configid)
+{
+ struct composite_devdesc_s dev[2];
+ int ifnobase = 0;
+ int strbase = COMPOSITE_NSTRIDS;
+
+ syslog(LOG_INFO, "board_composite_connect(port: %d, configid: %d)\n",
+ port, configid);
+
+ /* Configure the CDC/ACM device */
+
+ /* Ask the cdcacm driver to fill in the constants we didn't
+ * know here.
+ */
+
+ cdcacm_get_composite_devdesc(&dev[0]);
+
+ /* Overwrite and correct some values... */
+
+ /* The callback functions for the CDC/ACM class */
+
+ dev[0].classobject = cdcacm_classobject;
+ dev[0].uninitialize = cdcacm_uninitialize;
+
+ /* Interfaces */
+
+ dev[0].devinfo.ifnobase = ifnobase; /* Offset to Interface-IDs */
+ dev[0].minor = 0; /* The minor interface number */
+
+ /* Strings */
+
+ dev[0].devinfo.strbase = strbase; /* Offset to String Numbers */
+
+ /* Endpoints */
+
+ dev[0].devinfo.epno[CDCACM_EP_INTIN_IDX] = 1;
+ dev[0].devinfo.epno[CDCACM_EP_BULKIN_IDX] = 5;
+ dev[0].devinfo.epno[CDCACM_EP_BULKOUT_IDX] = 2;
+
+ /* Count up the base numbers */
+
+ ifnobase += dev[0].devinfo.ninterfaces;
+ strbase += dev[0].devinfo.nstrings;
+
+ /* Configure the CDC/ECM device */
+
+ cdcecm_get_composite_devdesc(&dev[1]);
+
+ dev[1].devinfo.ifnobase = ifnobase; /* Offset to Interface-IDs */
+ dev[1].devinfo.strbase = strbase; /* Offset to String Numbers */
+ dev[1].minor = 0; /* The minor interface number */
+ dev[1].devinfo.epno[CDCECM_EP_INTIN_IDX] = 4;
+ dev[1].devinfo.epno[CDCECM_EP_BULKIN_IDX] = 11;
+ dev[1].devinfo.epno[CDCECM_EP_BULKOUT_IDX] = 8;
+
+ return composite_initialize(2, dev);
+}
+
+#endif /* CONFIG_BOARDCTL_USBDEVCTRL && CONFIG_USBDEV_COMPOSITE */
diff --git a/configs/pnev5180b/src/lpc17_leds.c b/configs/pnev5180b/src/lpc17_leds.c
new file mode 100644
index 00000000000..fc737ebd0cf
--- /dev/null
+++ b/configs/pnev5180b/src/lpc17_leds.c
@@ -0,0 +1,157 @@
+/****************************************************************************
+ * configs/pnev5180b/src/lpc17_leds.c
+ *
+ * Copyright (C) 2019 Gregory Nutt. All rights reserved.
+ * Author: Michael Jung
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ * used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include
+
+#include
+#include
+#include
+
+#include
+#include
+
+#include "up_arch.h"
+#include "up_internal.h"
+
+#include "lpc17_gpio.h"
+#include "pnev5180b.h"
+
+#ifdef CONFIG_ARCH_LEDS
+
+/****************************************************************************
+ * Name: board_autoled_initialize
+ ****************************************************************************/
+
+void pnev5180b_autoled_initialize(void)
+{
+ /* Configure all LED GPIO lines */
+
+ lpc17_configgpio(PNEV5180B_LED_RED);
+ lpc17_configgpio(PNEV5180B_LED_ORANGE);
+ lpc17_configgpio(PNEV5180B_LED_BLUE);
+ lpc17_configgpio(PNEV5180B_LED_GREEN);
+}
+
+/****************************************************************************
+ * Name: board_autoled_on
+ ****************************************************************************/
+
+void board_autoled_on(int led)
+{
+ switch (led)
+ {
+ case LED_STARTED:
+ lpc17_gpiowrite(PNEV5180B_LED_RED, true);
+ lpc17_gpiowrite(PNEV5180B_LED_ORANGE, true);
+ lpc17_gpiowrite(PNEV5180B_LED_BLUE, true);
+ lpc17_gpiowrite(PNEV5180B_LED_GREEN, true);
+ break;
+
+ case LED_HEAPALLOCATE:
+ lpc17_gpiowrite(PNEV5180B_LED_RED, false);
+ lpc17_gpiowrite(PNEV5180B_LED_ORANGE, false);
+ lpc17_gpiowrite(PNEV5180B_LED_BLUE, false);
+ lpc17_gpiowrite(PNEV5180B_LED_GREEN, true);
+ break;
+
+ case LED_IRQSENABLED:
+ lpc17_gpiowrite(PNEV5180B_LED_RED, false);
+ lpc17_gpiowrite(PNEV5180B_LED_ORANGE, false);
+ lpc17_gpiowrite(PNEV5180B_LED_BLUE, true);
+ lpc17_gpiowrite(PNEV5180B_LED_GREEN, false);
+ break;
+
+ case LED_STACKCREATED:
+ lpc17_gpiowrite(PNEV5180B_LED_RED, false);
+ lpc17_gpiowrite(PNEV5180B_LED_ORANGE, false);
+ lpc17_gpiowrite(PNEV5180B_LED_BLUE, false);
+ lpc17_gpiowrite(PNEV5180B_LED_GREEN, false);
+ break;
+
+ case LED_INIRQ:
+ lpc17_gpiowrite(PNEV5180B_LED_GREEN, true);
+ break;
+
+ case LED_SIGNAL:
+ lpc17_gpiowrite(PNEV5180B_LED_BLUE, true);
+ break;
+
+ case LED_ASSERTION:
+ lpc17_gpiowrite(PNEV5180B_LED_ORANGE, true);
+ break;
+
+ case LED_PANIC:
+ lpc17_gpiowrite(PNEV5180B_LED_RED, true);
+ break;
+
+ default:
+ DEBUGPANIC();
+ }
+}
+
+/****************************************************************************
+ * Name: board_autoled_off
+ ****************************************************************************/
+
+void board_autoled_off(int led)
+{
+ switch (led)
+ {
+ case LED_INIRQ:
+ lpc17_gpiowrite(PNEV5180B_LED_GREEN, false);
+ break;
+
+ case LED_SIGNAL:
+ lpc17_gpiowrite(PNEV5180B_LED_BLUE, false);
+ break;
+
+ case LED_ASSERTION:
+ lpc17_gpiowrite(PNEV5180B_LED_ORANGE, false);
+ break;
+
+ case LED_PANIC:
+ lpc17_gpiowrite(PNEV5180B_LED_RED, false);
+ break;
+
+ default:
+ DEBUGPANIC();
+ }
+}
+
+#endif /* CONFIG_ARCH_LEDS */
diff --git a/configs/pnev5180b/src/lpc17_spi.c b/configs/pnev5180b/src/lpc17_spi.c
new file mode 100644
index 00000000000..5367b6c0643
--- /dev/null
+++ b/configs/pnev5180b/src/lpc17_spi.c
@@ -0,0 +1,114 @@
+/****************************************************************************
+ * configs/pnev5180b/src/lpc17_spi.c
+ *
+ * Copyright (C) 2019 Gregory Nutt. All rights reserved.
+ * Authors: Gregory Nutt
+ * Michael Jung
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ * used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include
+
+#include
+#include
+#include
+
+#include
+#include
+
+#include "up_arch.h"
+#include "chip.h"
+#include "lpc17_spi.h"
+#include "lpc17_gpio.h"
+#include "pnev5180b.h"
+
+#if defined(CONFIG_LPC17_SPI)
+
+/****************************************************************************
+ * Public Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: pnev5180b_spidev_initialize
+ *
+ * Description:
+ * Called to configure SPI chip select and card detect GPIO pins for the
+ * NXP PNEV5180B NFC Frontend Development Kit.
+ *
+ ****************************************************************************/
+
+void weak_function pnev5180b_spidev_initialize(void)
+{
+}
+
+/****************************************************************************
+ * Name: lpc17_spiselect and lpc17_spistatus
+ *
+ * Description:
+ * The external functions, lpc17_spiselect and lpc17_spistatus
+ * must be provided by board-specific logic. They are implementations of
+ * the select and status methods of the SPI interface defined by struct
+ * spi_ops_s (see include/nuttx/spi/spi.h). All other methods (including
+ * lpc17_spibus_initialize()) are provided by common LPC17xx logic. To
+ * use this common SPI logic on your board:
+ *
+ * 1. Provide logic in lpc17_boardinitialize() to configure SPI/SSP chip
+ * select
+ * pins.
+ * 2. Provide lpc17_spiselect and lpc17_spistatus functions
+ * in your board-specific logic. These functions will perform chip
+ * selection and status operations using GPIOs in the way your board is
+ * configured.
+ * 3. Add a calls to lpc17_spibus_initialize() in your low level
+ * application initialization logic
+ * 4. The handle returned by lpc17_spibus_initialize() may then be used
+ * to bind the SPI driver to higher level logic (e.g., calling
+ * mmcsd_spislotinitialize(), for example, will bind the SPI driver to
+ * the SPI MMC/SD driver).
+ *
+ ****************************************************************************/
+
+void lpc17_spiselect(FAR struct spi_dev_s *dev, uint32_t devid, bool selected)
+{
+ spiinfo("devid: %d CS: %s\n",
+ (int)devid, selected ? "assert" : "de-assert");
+}
+
+uint8_t lpc17_spistatus(FAR struct spi_dev_s *dev, uint32_t devid)
+{
+ spiinfo("devid: %d\n", (int)devid);
+ return 0;
+}
+
+#endif /* CONFIG_LPC17_SPI */
diff --git a/configs/pnev5180b/src/lpc17_symtab.c b/configs/pnev5180b/src/lpc17_symtab.c
new file mode 100644
index 00000000000..ff138514514
--- /dev/null
+++ b/configs/pnev5180b/src/lpc17_symtab.c
@@ -0,0 +1,110 @@
+/*****************************************************************************
+ * config/pnev5180b/src/lpc17_symtab.c
+ *
+ * Copyright (C) 2019 Gregory Nutt. All rights reserved.
+ * Author: Michael Jung
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ * used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ *****************************************************************************/
+
+/*****************************************************************************
+ * Included Files
+ *****************************************************************************/
+
+#include
+#include
+
+/*****************************************************************************
+ * Public Data
+ *****************************************************************************/
+
+extern void *exit;
+extern void *fflush;
+extern void *fopen;
+extern void *fprintf;
+extern void *get_errno_ptr;
+extern void *getpid;
+extern void *kill;
+extern void *memset;
+extern void *printf;
+extern void *pthread_attr_init;
+extern void *pthread_create;
+extern void *pthread_exit;
+extern void *pthread_join;
+extern void *pthread_mutex_init;
+extern void *pthread_mutex_lock;
+extern void *pthread_mutex_unlock;
+extern void *puts;
+extern void *sched_getstreams;
+extern void *sem_destroy;
+extern void *sem_init;
+extern void *sem_post;
+extern void *sem_wait;
+extern void *sigaction;
+extern void *sigemptyset;
+extern void *sigqueue;
+extern void *sleep;
+extern void *strcmp;
+extern void *task_create;
+extern void *usleep;
+
+const struct symtab_s lpc17_exports[] =
+{
+ {"exit", &exit},
+ {"fflush", &fflush},
+ {"fopen", &fopen},
+ {"fprintf", &fprintf},
+ {"get_errno_ptr", &get_errno_ptr},
+ {"getpid", &getpid},
+ {"kill", &kill},
+ {"memset", &memset},
+ {"printf", &printf},
+ {"pthread_attr_init", &pthread_attr_init},
+ {"pthread_create", &pthread_create},
+ {"pthread_exit", &pthread_exit},
+ {"pthread_join", &pthread_join},
+ {"pthread_mutex_init", &pthread_mutex_init},
+ {"pthread_mutex_lock", &pthread_mutex_lock},
+ {"pthread_mutex_unlock", &pthread_mutex_unlock},
+ {"puts", &puts},
+ {"sched_getstreams", &sched_getstreams},
+ {"sem_destroy", &sem_destroy},
+ {"sem_init", &sem_init},
+ {"sem_post", &sem_post},
+ {"sem_wait", &sem_wait},
+ {"sigaction", &sigaction},
+ {"sigemptyset", &sigemptyset},
+ {"sigqueue", &sigqueue},
+ {"sleep", &sleep},
+ {"strcmp", &strcmp},
+ {"task_create", &task_create},
+ {"usleep", &usleep},
+};
+
+const int lpc17_nexports = sizeof(lpc17_exports) / sizeof(struct symtab_s);
diff --git a/configs/pnev5180b/src/lpc17_symtab.h b/configs/pnev5180b/src/lpc17_symtab.h
new file mode 100644
index 00000000000..1e43e83e110
--- /dev/null
+++ b/configs/pnev5180b/src/lpc17_symtab.h
@@ -0,0 +1,56 @@
+/*****************************************************************************
+ * config/pnev5180b/src/lpc17_symtab.c
+ *
+ * Copyright (C) 2019 Gregory Nutt. All rights reserved.
+ * Author: Michael Jung
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ * used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ *****************************************************************************/
+
+#ifndef __CONFIGS_PNEV5180B_SRC_LPC17_SYMTAB_H
+#define __CONFIGS_PNEV5180B_SRC_LPC17_SYMTAB_H
+
+/*****************************************************************************
+ * Included Files
+ *****************************************************************************/
+
+#include
+#include
+
+#if defined(CONFIG_ELF) || defined(CONFIG_NXFLAT)
+
+/*****************************************************************************
+ * Public Data
+ *****************************************************************************/
+
+extern const struct symtab_s lpc17_exports[];
+extern const int lpc17_nexports;
+
+#endif
+#endif /* __CONFIGS_PNEV5180B_SRC_LPC17_SYMTAB_H */
diff --git a/configs/pnev5180b/src/pnev5180b.h b/configs/pnev5180b/src/pnev5180b.h
new file mode 100644
index 00000000000..f570f561e63
--- /dev/null
+++ b/configs/pnev5180b/src/pnev5180b.h
@@ -0,0 +1,127 @@
+/****************************************************************************
+ * configs/pnev5180b/src/pnev5180b.h
+ *
+ * Copyright (C) 2019 Gregory Nutt. All rights reserved.
+ * Authors: Gregory Nutt
+ * Michael Jung
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ * used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+#ifndef _CONFIGS_PNEV5180B_SRC_PNEV5180B_H
+#define _CONFIGS_PNEV5180B_SRC_PNEV5180B_H
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include
+#include
+
+/****************************************************************************
+ * Pre-processor Definitions
+ ****************************************************************************/
+
+/****************************************************************************
+ * NXP PNEV5180B Pin Usage
+ ****************************************************************************/
+
+/* Pin Description On Board Connector
+ * -------------------------------- ---------------- -------------
+ * P0.2/TXD0/AD0.7 TX J201
+ * P0.3/RXD0/AD0.6 RX
+ * P0.22/RTS1/TD1 LD200 ORANGE LED
+ * P0.15/TXD1/SCK0/SCK PN5180-SCK
+ * P0.16/RXD1/SSEL0/SSEL PN5180-SSEL PN5180
+ * P0.17/CTS1/MISO0/MISO PN5180-MISO
+ * P0.18/DCD1/M0SI0/MOSI PN5180-MOSI
+ * P0.19/DSR1/SDA1 EEPROM (Not Assembled)
+ * P0.20/DTR1/SCL1 EEPROM
+ * P0.21/RI1/RD1 PN5180-AUX2 PN5180
+ * P0.29/USB_D+ USB-D+ USB
+ * P0.30/USB_D- USB-D-
+ * P2.0/PWM1.1/TXD1 LD201 RED LED
+ * P2.5/PWM1.6/DTR1/TRACEDATA0 PN5180-nPN_RST
+ * P2.9/USB_CONNECT/RXD2 USB_CONNECT USB
+ * P2.11/nEINT1/I2STX_CLK PN5180-BUSY PN5180
+ * P2.12/nEINT2/I2STX_WS PN5180-IRQ
+ * P3.25/MAT0.0/PWM1.2 LD203 GREEN LED
+ * P3.26/STCLK/MAT0.1/PWM1.3 LD202 BLUE LED
+ */
+
+#define PNEV5180B_LED_BLUE (GPIO_OUTPUT | GPIO_VALUE_ONE | GPIO_PORT3 | GPIO_PIN26)
+#define PNEV5180B_LED_GREEN (GPIO_OUTPUT | GPIO_VALUE_ONE | GPIO_PORT3 | GPIO_PIN25)
+#define PNEV5180B_LED_ORANGE (GPIO_OUTPUT | GPIO_VALUE_ONE | GPIO_PORT0 | GPIO_PIN22)
+#define PNEV5180B_LED_RED (GPIO_OUTPUT | GPIO_VALUE_ONE | GPIO_PORT2 | GPIO_PIN0)
+
+#ifndef __ASSEMBLY__
+
+/****************************************************************************
+ * Public Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: pnev5180b_bringup
+ *
+ * Description:
+ * Perform architecture-specific initialization
+ *
+ * CONFIG_BOARD_LATE_INITIALIZE=y :
+ * Called from board_late_initialize().
+ *
+ * CONFIG_BOARD_LATE_INITIALIZE=n && CONFIG_LIB_BOARDCTL=y :
+ * Called from the NSH library
+ *
+ ****************************************************************************/
+
+int pnev5180b_bringup(void);
+
+/****************************************************************************
+ * Name: pnev5180b_autoled_initialize
+ *
+ * Description:
+ * Called early in power-up initialization to initialize the LED hardware.
+ *
+ ****************************************************************************/
+
+void pnev5180b_autoled_initialize(void);
+
+/****************************************************************************
+ * Name: pnev5180b_spidev_initialize
+ *
+ * Description:
+ * Called to configure SPI chip select GPIO pins for the NXP PNEV5180B
+ * board.
+ *
+ ****************************************************************************/
+
+void weak_function pnev5180b_spidev_initialize(void);
+
+#endif /* __ASSEMBLY__ */
+#endif /* _CONFIGS_PNEV5180B_SRC_PNEV5180B_H */