twr-k60n512 configurations converted to use the kconfig-frontends tools

git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5785 42af7a65-404d-4744-a932-0658087f49c3

arch/arm/src/kinetis/Kconfig

@@ -340,36 +340,36 @@ endmenu
 comment "Kinetis GPIO Interrupt Configuration"
 
 config GPIO_IRQ
-	bool "GPIO interrupts"
+	bool "GPIO pin interrupts"
 	---help---
-		Enable support for interrupt GPIO pins
+		Enable support for interrupting GPIO pins
 
 if GPIO_IRQ
 
 config KINETIS_PORTAINTS
 	bool "GPIOA interrupts"
 	---help---
-		Enable support for interrupts from GPIO port A pins
+		Enable support for 32 interrupts from GPIO port A pins
 
 config KINETIS_PORTBINTS
 	bool "GPIOB interrupts"
 	---help---
-		Enable support for interrupts from GPIO port B pins
+		Enable support for 32 interrupts from GPIO port B pins
 
 config KINETIS_PORTCINTS
 	bool "GPIOC interrupts"
 	---help---
-		Enable support for interrupts from GPIO port C pins
+		Enable support for 32 interrupts from GPIO port C pins
 
 config KINETIS_PORTDINTS
 	bool "GPIOD interrupts"
 	---help---
-		Enable support for interrupts from GPIO port D pins
+		Enable support for 32 interrupts from GPIO port D pins
 
 config KINETIS_PORTEINTS
 	bool "GPIOE interrupts"
 	---help---
-		Enable support for interrupts from GPIO port E pins
+		Enable support for 32 interrupts from GPIO port E pins
 
 endif
 
@@ -394,13 +394,15 @@ config ENET_NRXBUFFERS
 	int "Number of Ethernet Rx buffers"
 	default 6
 	---help---
-		Number of Ethernet Rx buffers to use.
+		Number of Ethernet Rx buffers to use.  The size of one buffer is
+		determined by CONFIG_NET_BUFSIZE
 
 config ENET_NTXBUFFERS
 	int "Number of Ethernet Tx buffers"
 	default 2
 	---help---
-		Number of Ethernet Tx buffers to use.
+		Number of Ethernet Tx buffers to use. The size of one buffer is
+		determined by CONFIG_NET_BUFSIZE
 
 config ENET_PHYADDR
 	int "PHY address"

configs/kwikstik-k40/README.txt

@@ -458,7 +458,9 @@ KwikStik-K40-specific Configuration Options
     CONFIG_KINETIS_PIT      -- Support Programmable Interval Timers
     CONFIG_ARMV7M_MPU       -- Support the MPU
 
-  Kinetis interrupt priorities (Default is the mid priority)
+  Kinetis interrupt priorities (Default is the mid priority)  These should
+  not be set because they can cause unhandled, nested interrupts.  All
+  interrupts need to be at the default priority in the current design.
 
     CONFIG_KINETIS_UART0PRIO
     CONFIG_KINETIS_UART1PRIO

configs/kwikstik-k40/ostest/defconfig

@@ -233,9 +233,9 @@ CONFIG_RR_INTERVAL=200
 CONFIG_TASK_NAME_SIZE=0
 # CONFIG_SCHED_HAVE_PARENT is not set
 # CONFIG_JULIAN_TIME is not set
-CONFIG_START_YEAR=2009
+CONFIG_START_YEAR=2013
-CONFIG_START_MONTH=9
+CONFIG_START_MONTH=3
-CONFIG_START_DAY=21
+CONFIG_START_DAY=25
 CONFIG_DEV_CONSOLE=y
 # CONFIG_MUTEX_TYPES is not set
 # CONFIG_PRIORITY_INHERITANCE is not set

configs/twr-k60n512/README.txt

@@ -595,7 +595,9 @@ TWR-K60N512-specific Configuration Options
     CONFIG_KINETIS_PIT      -- Support Programmable Interval Timers
     CONFIG_ARMV7M_MPU       -- Support the MPU
 
-  Kinetis interrupt priorities (Default is the mid priority)
+  Kinetis interrupt priorities (Default is the mid priority).  These should
+  not be set because they can cause unhandled, nested interrupts.  All
+  interrupts need to be at the default priority in the current design.
 
     CONFIG_KINETIS_UART0PRIO
     CONFIG_KINETIS_UART1PRIO
@@ -613,7 +615,7 @@ TWR-K60N512-specific Configuration Options
 
   PIN Interrupt Support
 
-    CONFIG_GPIO_IRQ          -- Enable pin interrtup support.  Also needs
+    CONFIG_GPIO_IRQ          -- Enable pin interrupt support.  Also needs
       one or more of the following:
     CONFIG_KINETIS_PORTAINTS -- Support 32 Port A interrupts
     CONFIG_KINETIS_PORTBINTS -- Support 32 Port B interrupts
@@ -639,7 +641,7 @@ TWR-K60N512-specific Configuration Options
         buffer is determined by CONFIG_NET_BUFSIZE.  Default: 6
     CONFIG_ENET_NTXBUFFERS - Number of TX buffers.  The size of one
         buffer is determined by CONFIG_NET_BUFSIZE.  Default: 2
-    CONFIG_ENET_USEMII - Usee MII mode.  Default: RMII mode.
+    CONFIG_ENET_USEMII - Use MII mode.  Default: RMII mode.
     CONFIG_ENET_PHYADDR - PHY address
  
 Configurations
@@ -660,7 +662,23 @@ Where <subdir> is one of the following:
     This configuration directory, performs a simple OS test using
     examples/ostest.
 
-    CONFIG_KINETIS_BUILDROOT=y      : NuttX buildroot under Linux or Cygwin
+    NOTES:
+
+    1. This configuration uses the mconf-based configuration tool.  To
+       change this configuration using that tool, you should:
+
+       a. Build and install the kconfig-mconf tool.  See nuttx/README.txt
+          and misc/tools/
+
+       b. Execute 'make menuconfig' in nuttx/ in order to start the
+          reconfiguration process.
+
+    2. Default platform/toolchain:
+
+       CONFIG_HOST_LINUX=y                 : Linux (Cygwin under Windows okay too).
+       CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT=y : Buildroot (arm-nuttx-elf-gcc)
+       CONFIG_ARMV7M_OABI_TOOLCHAIN=y      : The older OABI version
+       CONFIG_RAW_BINARY=y                 : Output formats: ELF and raw binary
 
   nsh:
   ---
@@ -669,23 +687,42 @@ Where <subdir> is one of the following:
     Support for the board's SPI-based MicroSD card is included
     (but not passing tests as of this writing).
 
-    NOTE: An SDHC driver is underwork and can be enabled in the NSH
+    NOTES:
-    configuration for further testing be setting the following
-    configuration faluesas follows:
 
-      -CONFIG_KINETIS_SDHC=n
+    1. This configuration uses the mconf-based configuration tool.  To
-      +CONFIG_KINETIS_SDHC=y         # Enable the SDHC driver
+       change this configuration using that tool, you should:
 
-      -CONFIG_GPIO_IRQ=n
+       a. Build and install the kconfig-mconf tool.  See nuttx/README.txt
-      +CONFIG_GPIO_IRQ=y             # Enable GPIO interrupts
+          and misc/tools/
 
-      -CONFIG_KINETIS_PORTEINTS=n
+       b. Execute 'make menuconfig' in nuttx/ in order to start the
-      +CONFIG_KINETIS_PORTEINTS=y    # Enable PortE GPIO interrupts
+          reconfiguration process.
 
-      -CONFIG_SCHED_WORKQUEUE=n
+    2. Default platform/toolchain:
-      +CONFIG_SCHED_WORKQUEUE=y      # Enable the NuttX workqueue
 
-      -CONFIG_NSH_ARCHINIT=n
+       CONFIG_HOST_LINUX=y                 : Linux (Cygwin under Windows okay too).
-      +CONFIG_NSH_ARCHINIT=y         # Provide NSH intialization logic
+       CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT=y : Buildroot (arm-nuttx-elf-gcc)
+       CONFIG_ARMV7M_OABI_TOOLCHAIN=y      : The older OABI version
+       CONFIG_RAW_BINARY=y                 : Output formats: ELF and raw binary
 
+    3. An SDHC driver is under work and can be enabled in the NSH configuration
+       for further testing be setting the following configuration values as
+       follows:
 
+      CONFIG_KINETIS_SDHC=y                : Enable the SDHC driver
+
+      CONFIG_MMCSD=y                       : Enable MMC/SD support
+      CONFIG_MMCSD_SDIO=y                  : Use the SDIO-based MMC/SD driver
+      CONFIG_MMCSD_NSLOTS=1                : One MMC/SD slot
+
+      CONFIG_FAT=y                         : Eable FAT file system
+      CONFIG_FAT_LCNAMES=y                 : FAT lower case name support
+      CONFIG_FAT_LFN=y                     : FAT long file name support
+      CONFIG_FAT_MAXFNAME=32               : Maximum lenght of a long file name
+
+      CONFIG_GPIO_IRQ=y                    : Enable GPIO interrupts
+      CONFIG_KINETIS_PORTEINTS=y           : Enable PortE GPIO interrupts
+
+      CONFIG_SCHED_WORKQUEUE=y             : Enable the NuttX workqueue
+
+      CONFIG_NSH_ARCHINIT=y                : Provide NSH intialization logic

configs/twr-k60n512/nsh/appconfig

@@ -1,42 +0,0 @@
-############################################################################
-# configs/twr-k60n512/nsh/appconfig
-#
-#   Copyright (C) 2011-2012 Gregory Nutt. All rights reserved.
-#   Author: Gregory Nutt <gnutt@nuttx.org>
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-#
-# 1. Redistributions of source code must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-# 2. Redistributions in binary form must reproduce the above copyright
-#    notice, this list of conditions and the following disclaimer in
-#    the documentation and/or other materials provided with the
-#    distribution.
-# 3. Neither the name NuttX nor the names of its contributors may be
-#    used to endorse or promote products derived from this software
-#    without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
-# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
-# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
-# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
-# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
-# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-# POSSIBILITY OF SUCH DAMAGE.
-#
-############################################################################
-
-# Path to example in apps/examples containing the user_start entry point
-
-CONFIGURED_APPS += examples/nsh
-
-CONFIGURED_APPS += system/readline
-CONFIGURED_APPS += nshlib
-

configs/twr-k60n512/ostest/appconfig

@@ -1,39 +0,0 @@
-############################################################################
-# configs/twr-k60n512/ostest/appconfig
-#
-#   Copyright (C) 2011 Gregory Nutt. All rights reserved.
-#   Author: Gregory Nutt <gnutt@nuttx.org>
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-#
-# 1. Redistributions of source code must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-# 2. Redistributions in binary form must reproduce the above copyright
-#    notice, this list of conditions and the following disclaimer in
-#    the documentation and/or other materials provided with the
-#    distribution.
-# 3. Neither the name NuttX nor the names of its contributors may be
-#    used to endorse or promote products derived from this software
-#    without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
-# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
-# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
-# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
-# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
-# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-# POSSIBILITY OF SUCH DAMAGE.
-#
-############################################################################
-
-# Path to example in apps/examples containing the user_start entry point
-
-CONFIGURED_APPS += examples/ostest
-