diff --git a/Documentation/platforms/xtensa/esp32s3/boards/lckfb-szpi-esp32s3/index.rst b/Documentation/platforms/xtensa/esp32s3/boards/lckfb-szpi-esp32s3/index.rst
index 9729475fb0a..3a28c65433b 100644
--- a/Documentation/platforms/xtensa/esp32s3/boards/lckfb-szpi-esp32s3/index.rst
+++ b/Documentation/platforms/xtensa/esp32s3/boards/lckfb-szpi-esp32s3/index.rst
@@ -526,6 +526,19 @@ Then format and mount the SD card::
   nsh> cat /mnt/sd/test.txt
   hello
 
+gc0308
+------
+
+Minimal NuttShell configuration with GC0308 DVP camera support only.
+Based on the nsh configuration, this adds only the GC0308 image sensor
+driver, ESP32-S3 CAM DVP controller, and the V4L2 video pipeline.
+Console is accessible over UART0 (serial).
+
+You can run the configuration and compilation procedure::
+
+  $ ./tools/configure.sh lckfb-szpi-esp32s3:gc0308
+  $ make flash -j$(nproc) ESPTOOL_PORT=/dev/ttyUSB0
+
 camera
 ------
 
diff --git a/boards/xtensa/esp32s3/lckfb-szpi-esp32s3/configs/gc0308/defconfig b/boards/xtensa/esp32s3/lckfb-szpi-esp32s3/configs/gc0308/defconfig
new file mode 100644
index 00000000000..0917384e8bc
--- /dev/null
+++ b/boards/xtensa/esp32s3/lckfb-szpi-esp32s3/configs/gc0308/defconfig
@@ -0,0 +1,62 @@
+#
+# This file is autogenerated: PLEASE DO NOT EDIT IT.
+#
+# You can use "make menuconfig" to make any modifications to the installed .config file.
+# You can then do "make savedefconfig" to generate a new defconfig file that includes your
+# modifications.
+#
+# CONFIG_ARCH_LEDS is not set
+# CONFIG_NSH_ARGCAT is not set
+# CONFIG_NSH_CMDOPT_HEXDUMP is not set
+CONFIG_ARCH="xtensa"
+CONFIG_ARCH_BOARD="lckfb-szpi-esp32s3"
+CONFIG_ARCH_BOARD_COMMON=y
+CONFIG_ARCH_BOARD_ESP32S3_LCKFB_SZPI=y
+CONFIG_ARCH_CHIP="esp32s3"
+CONFIG_ARCH_CHIP_ESP32S3=y
+CONFIG_ARCH_CHIP_ESP32S3WROOM1N16R8=y
+CONFIG_ARCH_INTERRUPTSTACK=2048
+CONFIG_ARCH_STACKDUMP=y
+CONFIG_ARCH_XTENSA=y
+CONFIG_BOARD_LOOPSPERMSEC=16717
+CONFIG_BUILTIN=y
+CONFIG_DEBUG_FULLOPT=y
+CONFIG_DEBUG_SYMBOLS=y
+CONFIG_DEV_GPIO=y
+CONFIG_ESP32S3_CAM=y
+CONFIG_ESP32S3_GPIO_IRQ=y
+CONFIG_ESP32S3_I2C0=y
+CONFIG_ESP32S3_UART0=y
+CONFIG_ESPRESSIF_LEDC=y
+CONFIG_ESPRESSIF_LEDC_CHANNEL0_PIN=42
+CONFIG_ESPRESSIF_LEDC_TIMER0=y
+CONFIG_FS_PROCFS=y
+CONFIG_FS_TMPFS=y
+CONFIG_GPIO_LOWER_HALF=y
+CONFIG_HAVE_CXX=y
+CONFIG_HAVE_CXXINITIALIZE=y
+CONFIG_IDLETHREAD_STACKSIZE=3072
+CONFIG_INIT_ENTRYPOINT="nsh_main"
+CONFIG_INIT_STACKSIZE=3072
+CONFIG_INTELHEX_BINARY=y
+CONFIG_IOEXPANDER=y
+CONFIG_IOEXPANDER_PCA9557=y
+CONFIG_LINE_MAX=64
+CONFIG_NSH_ARCHINIT=y
+CONFIG_NSH_BUILTIN_APPS=y
+CONFIG_NSH_FILEIOSIZE=512
+CONFIG_NSH_READLINE=y
+CONFIG_PREALLOC_TIMERS=4
+CONFIG_RAM_SIZE=114688
+CONFIG_RAM_START=0x20000000
+CONFIG_RR_INTERVAL=200
+CONFIG_SCHED_WAITPID=y
+CONFIG_START_DAY=6
+CONFIG_START_MONTH=12
+CONFIG_START_YEAR=2011
+CONFIG_SYSLOG_BUFFER=y
+CONFIG_SYSTEM_NSH=y
+CONFIG_UART0_SERIAL_CONSOLE=y
+CONFIG_VIDEO=y
+CONFIG_VIDEO_GC0308=y
+CONFIG_VIDEO_STREAM=y