mirror of
https://github.com/apache/nuttx.git
synced 2026-06-04 14:53:47 +08:00
Kinetis pwm support, based on kl_ftm driver.
Initial commit. Compile checked only.
This commit is contained in:
kfazz
@@ -383,6 +383,69 @@ config KINETIS_PIT
|
|||||||
|
|
||||||
endmenu
|
endmenu
|
||||||
|
|
||||||
|
config KINETIS_FTM0_PWM
|
||||||
|
bool "FTM0 PWM"
|
||||||
|
default n
|
||||||
|
depends on KINETIS_FTM0
|
||||||
|
---help---
|
||||||
|
Reserve timer 0 for use by PWM
|
||||||
|
|
||||||
|
Timer devices may be used for different purposes. One special purpose is
|
||||||
|
to generate modulated outputs for such things as motor control. If KINETIS_FTM0
|
||||||
|
is defined then THIS following may also be defined to indicate that
|
||||||
|
the timer is intended to be used for pulsed output modulation.
|
||||||
|
|
||||||
|
config KINETIS_FTM0_CHANNEL
|
||||||
|
int "FTM0 PWM Output Channel"
|
||||||
|
default 0
|
||||||
|
range 0 7
|
||||||
|
depends on KINETIS_FTM0_PWM
|
||||||
|
---help---
|
||||||
|
If FTM0 is enabled for PWM usage, you also need specifies the timer output
|
||||||
|
channel {0,..,7}
|
||||||
|
|
||||||
|
config KINETIS_FTM1_PWM
|
||||||
|
bool "FTM1 PWM"
|
||||||
|
default n
|
||||||
|
depends on KINETIS_FTM1
|
||||||
|
---help---
|
||||||
|
Reserve timer 1 for use by PWM
|
||||||
|
|
||||||
|
Timer devices may be used for different purposes. One special purpose is
|
||||||
|
to generate modulated outputs for such things as motor control. If KINETIS_FTM1
|
||||||
|
is defined then THIS following may also be defined to indicate that
|
||||||
|
the timer is intended to be used for pulsed output modulation.
|
||||||
|
|
||||||
|
config KINETIS_FTM1_CHANNEL
|
||||||
|
int "FTM1 PWM Output Channel"
|
||||||
|
default 0
|
||||||
|
range 0 1
|
||||||
|
depends on KINETIS_FTM1_PWM
|
||||||
|
---help---
|
||||||
|
If FTM1 is enabled for PWM usage, you also need specifies the timer output
|
||||||
|
channel {0,..,1}
|
||||||
|
|
||||||
|
config KINETIS_FTM2_PWM
|
||||||
|
bool "FTM2 PWM"
|
||||||
|
default n
|
||||||
|
depends on KINETIS_FTM2
|
||||||
|
---help---
|
||||||
|
Reserve timer 2 for use by PWM
|
||||||
|
|
||||||
|
Timer devices may be used for different purposes. One special purpose is
|
||||||
|
to generate modulated outputs for such things as motor control. If KINETIS_FTM2
|
||||||
|
is defined then THIS following may also be defined to indicate that
|
||||||
|
the timer is intended to be used for pulsed output modulation.
|
||||||
|
|
||||||
|
config KINETIS_FTM2_CHANNEL
|
||||||
|
int "FTM2 PWM Output Channel"
|
||||||
|
default 0
|
||||||
|
range 0 1
|
||||||
|
depends on KINETIS_FTM2_PWM
|
||||||
|
---help---
|
||||||
|
If FTM2 is enabled for PWM usage, you also need specifies the timer output
|
||||||
|
channel {0,..,1}
|
||||||
|
|
||||||
comment "Kinetis GPIO Interrupt Configuration"
|
comment "Kinetis GPIO Interrupt Configuration"
|
||||||
|
|
||||||
config GPIO_IRQ
|
config GPIO_IRQ
|
||||||
|
|||||||
@@ -127,6 +127,10 @@ ifeq ($(CONFIG_KINETIS_DMA),y)
|
|||||||
CHIP_CSRCS += kinetis_dma.c kinetis_pindma.c
|
CHIP_CSRCS += kinetis_dma.c kinetis_pindma.c
|
||||||
endif
|
endif
|
||||||
|
|
||||||
|
ifeq ($(CONFIG_PWM),y)
|
||||||
|
CHIP_CSRCS += kinetis_pwm.c
|
||||||
|
endif
|
||||||
|
|
||||||
ifeq ($(CONFIG_NET),y)
|
ifeq ($(CONFIG_NET),y)
|
||||||
ifeq ($(CONFIG_KINETIS_ENET),y)
|
ifeq ($(CONFIG_KINETIS_ENET),y)
|
||||||
CHIP_CSRCS += kinetis_enet.c
|
CHIP_CSRCS += kinetis_enet.c
|
||||||
|
|||||||
File diff suppressed because it is too large
Load Diff
@@ -0,0 +1,197 @@
|
|||||||
|
/************************************************************************************
|
||||||
|
* arch/arm/src/kinetis/kinetis_pwm.h
|
||||||
|
*
|
||||||
|
* Copyright (C) 2013 Gregory Nutt. All rights reserved.
|
||||||
|
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||||
|
* Alan Carvalho de Assis <acassis@gmail.com>
|
||||||
|
* Ken Fazzone <kfazz01@gmail.com>
|
||||||
|
*
|
||||||
|
* Redistribution and use in source and binary forms, with or without
|
||||||
|
* modification, are permitted provided that the following conditions
|
||||||
|
* are met:
|
||||||
|
*
|
||||||
|
* 1. Redistributions of source code must retain the above copyright
|
||||||
|
* notice, this list of conditions and the following disclaimer.
|
||||||
|
* 2. Redistributions in binary form must reproduce the above copyright
|
||||||
|
* notice, this list of conditions and the following disclaimer in
|
||||||
|
* the documentation and/or other materials provided with the
|
||||||
|
* distribution.
|
||||||
|
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||||
|
* used to endorse or promote products derived from this software
|
||||||
|
* without specific prior written permission.
|
||||||
|
*
|
||||||
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||||
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||||
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||||
|
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||||
|
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||||
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||||
|
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||||
|
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||||
|
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||||
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||||
|
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||||
|
* POSSIBILITY OF SUCH DAMAGE.
|
||||||
|
*
|
||||||
|
************************************************************************************/
|
||||||
|
|
||||||
|
#ifndef __ARCH_ARM_SRC_KINETIS_KINETIS_PWM_H
|
||||||
|
#define __ARCH_ARM_SRC_KINETIS_KINETIS_PWM_H
|
||||||
|
|
||||||
|
/************************************************************************************
|
||||||
|
* Included Files
|
||||||
|
************************************************************************************/
|
||||||
|
|
||||||
|
#include <nuttx/config.h>
|
||||||
|
|
||||||
|
#include "chip.h"
|
||||||
|
|
||||||
|
/************************************************************************************
|
||||||
|
* Pre-processor Definitions
|
||||||
|
************************************************************************************/
|
||||||
|
/* Configuration ********************************************************************/
|
||||||
|
/* Timer devices may be used for different purposes. One special purpose is
|
||||||
|
* to generate modulated outputs for such things as motor control. If CONFIG_KINETIS_FTMn
|
||||||
|
* is defined then the CONFIG_KINETIS_FTMn_PWM must also be defined to indicate that
|
||||||
|
* timer "n" is intended to be used for pulsed output signal generation.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifndef CONFIG_KINETIS_FTM0
|
||||||
|
# undef CONFIG_KINETIS_FTM0_PWM
|
||||||
|
#endif
|
||||||
|
#ifndef CONFIG_KINETIS_FTM1
|
||||||
|
# undef CONFIG_KINETIS_FTM1_PWM
|
||||||
|
#endif
|
||||||
|
#ifndef CONFIG_KINETIS_FTM2
|
||||||
|
# undef CONFIG_KINETIS_FTM2_PWM
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/* Check if PWM support for any channel is enabled. */
|
||||||
|
|
||||||
|
#if defined(CONFIG_KINETIS_FTM0_PWM) || defined(CONFIG_KINETIS_FTM1_PWM) || \
|
||||||
|
defined(CONFIG_KINETIS_FTM2_PWM)
|
||||||
|
|
||||||
|
#include <arch/board/board.h>
|
||||||
|
#include "kinetis_pinmux.h"
|
||||||
|
|
||||||
|
/* For each timer that is enabled for PWM usage, we need the following additional
|
||||||
|
* configuration settings:
|
||||||
|
*
|
||||||
|
* CONFIG_KINETIS_FTMx_CHANNEL - Specifies the timer output channel {1,..,4}
|
||||||
|
* PWM_FTMx_CHn - One of the values defined in kinetis*_pinmap.h. In the case
|
||||||
|
* where there are multiple pin selections, the correct setting must be provided
|
||||||
|
* in the arch/board/board.h file.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifdef CONFIG_KINETIS_FTM0_PWM
|
||||||
|
# if !defined(CONFIG_KINETIS_FTM0_CHANNEL)
|
||||||
|
# error "CONFIG_KINETIS_FTM0_CHANNEL must be provided"
|
||||||
|
# elif CONFIG_KINETIS_FTM0_CHANNEL == 0
|
||||||
|
# define PWM_FTM0_PINCFG GPIO_FTM0_CH0OUT
|
||||||
|
# elif CONFIG_KINETIS_FTM0_CHANNEL == 1
|
||||||
|
# define PWM_FTM0_PINCFG GPIO_FTM0_CH1OUT
|
||||||
|
# elif CONFIG_KINETIS_FTM0_CHANNEL == 2
|
||||||
|
# define PWM_FTM0_PINCFG GPIO_FTM0_CH2OUT
|
||||||
|
# elif CONFIG_KINETIS_FTM0_CHANNEL == 3
|
||||||
|
# define PWM_FTM0_PINCFG GPIO_FTM0_CH3OUT
|
||||||
|
# elif CONFIG_KINETIS_FTM0_CHANNEL == 4
|
||||||
|
# define PWM_FTM0_PINCFG GPIO_FTM0_CH4OUT
|
||||||
|
# elif CONFIG_KINETIS_FTM0_CHANNEL == 5
|
||||||
|
# define PWM_FTM0_PINCFG GPIO_FTM0_CH5OUT
|
||||||
|
# elif CONFIG_KINETIS_FTM0_CHANNEL == 6
|
||||||
|
# define PWM_FTM0_PINCFG GPIO_FTM0_CH6OUT
|
||||||
|
# elif CONFIG_KINETIS_FTM0_CHANNEL == 7
|
||||||
|
# define PWM_FTM0_PINCFG GPIO_FTM0_CH7OUT
|
||||||
|
# else
|
||||||
|
# error "Unsupported value of CONFIG_KINETIS_FTM1_CHANNEL"
|
||||||
|
# endif
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#ifdef CONFIG_KINETIS_FTM1_PWM
|
||||||
|
# if !defined(CONFIG_KINETIS_FTM1_CHANNEL)
|
||||||
|
# error "CONFIG_KINETIS_FTM1_CHANNEL must be provided"
|
||||||
|
# elif CONFIG_KINETIS_FTM1_CHANNEL == 0
|
||||||
|
# define PWM_FTM1_PINCFG GPIO_FTM1_CH0OUT
|
||||||
|
# elif CONFIG_KINETIS_FTM1_CHANNEL == 1
|
||||||
|
# define PWM_FTM1_PINCFG GPIO_FTM1_CH1OUT
|
||||||
|
# elif CONFIG_KINETIS_FTM1_CHANNEL == 2
|
||||||
|
# define PWM_FTM1_PINCFG GPIO_FTM1_CH2OUT
|
||||||
|
# elif CONFIG_KINETIS_FTM1_CHANNEL == 3
|
||||||
|
# define PWM_FTM1_PINCFG GPIO_FTM1_CH3OUT
|
||||||
|
# elif CONFIG_KINETIS_FTM1_CHANNEL == 4
|
||||||
|
# define PWM_FTM1_PINCFG GPIO_FTM1_CH4OUT
|
||||||
|
# elif CONFIG_KINETIS_FTM1_CHANNEL == 5
|
||||||
|
# define PWM_FTM1_PINCFG GPIO_FTM1_CH5OUT
|
||||||
|
# else
|
||||||
|
# error "Unsupported value of CONFIG_KINETIS_FTM2_CHANNEL"
|
||||||
|
# endif
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#ifdef CONFIG_KINETIS_FTM2_PWM
|
||||||
|
# if !defined(CONFIG_KINETIS_FTM2_CHANNEL)
|
||||||
|
# error "CONFIG_KINETIS_FTM2_CHANNEL must be provided"
|
||||||
|
# elif CONFIG_KINETIS_FTM2_CHANNEL == 0
|
||||||
|
# define PWM_FTM2_PINCFG GPIO_FTM2_CH0OUT
|
||||||
|
# elif CONFIG_KINETIS_FTM2_CHANNEL == 1
|
||||||
|
# define PWM_FTM2_PINCFG GPIO_FTM2_CH1OUT
|
||||||
|
# elif CONFIG_KINETIS_FTM2_CHANNEL == 2
|
||||||
|
# define PWM_FTM2_PINCFG GPIO_FTM2_CH2OUT
|
||||||
|
# elif CONFIG_KINETIS_FTM2_CHANNEL == 3
|
||||||
|
# define PWM_FTM2_PINCFG GPIO_FTM2_CH3OUT
|
||||||
|
# elif CONFIG_KINETIS_FTM2_CHANNEL == 4
|
||||||
|
# define PWM_FTM2_PINCFG GPIO_FTM2_CH4OUT
|
||||||
|
# elif CONFIG_KINETIS_FTM2_CHANNEL == 5
|
||||||
|
# define PWM_FTM2_PINCFG GPIO_FTM2_CH5OUT
|
||||||
|
# else
|
||||||
|
# error "Unsupported value of CONFIG_KINETIS_FTM3_CHANNEL"
|
||||||
|
# endif
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/************************************************************************************
|
||||||
|
* Public Types
|
||||||
|
************************************************************************************/
|
||||||
|
|
||||||
|
/************************************************************************************
|
||||||
|
* Public Data
|
||||||
|
************************************************************************************/
|
||||||
|
|
||||||
|
#ifndef __ASSEMBLY__
|
||||||
|
|
||||||
|
#undef EXTERN
|
||||||
|
#if defined(__cplusplus)
|
||||||
|
#define EXTERN extern "C"
|
||||||
|
extern "C"
|
||||||
|
{
|
||||||
|
#else
|
||||||
|
#define EXTERN extern
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/************************************************************************************
|
||||||
|
* Public Functions
|
||||||
|
************************************************************************************/
|
||||||
|
|
||||||
|
/************************************************************************************
|
||||||
|
* Name: kinetis_pwminitialize
|
||||||
|
*
|
||||||
|
* Description:
|
||||||
|
* Initialize one timer for use with the upper_level PWM driver.
|
||||||
|
*
|
||||||
|
* Input Parameters:
|
||||||
|
* timer - A number identifying the timer use.
|
||||||
|
*
|
||||||
|
* Returned Value:
|
||||||
|
* On success, a pointer to the kinetis lower half PWM driver is returned.
|
||||||
|
* NULL is returned on any failure.
|
||||||
|
*
|
||||||
|
************************************************************************************/
|
||||||
|
|
||||||
|
FAR struct pwm_lowerhalf_s *kinetis_pwminitialize(int timer);
|
||||||
|
|
||||||
|
#undef EXTERN
|
||||||
|
#if defined(__cplusplus)
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#endif /* __ASSEMBLY__ */
|
||||||
|
#endif /* CONFIG_KINETIS_FTMx_PWM */
|
||||||
|
#endif /* __ARCH_ARM_SRC_KINETIS_KINETIS_PWM_H */
|
||||||
Reference in New Issue
Block a user