LM3S ethernet driver development

git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@1811 42af7a65-404d-4744-a932-0658087f49c3

configs/eagle100/README.txt

@@ -168,6 +168,7 @@ Eagle100-specific Configuration Options
 
 	CONFIG_LM3S_ETHERNET - This must be set (along with CONFIG_NET)
 	  to build the LM3S Ethernet driver
+	CONFIG_LM3S_ETHLEDS - Enable to use Ethernet LEDs on the board.
 	CONFIG_LM3S_BOARDMAC - If the board-specific logic can provide
 	  a MAC address (via lm3s_ethernetmac()), then this should be selected.
 

configs/eagle100/include/board.h

@@ -138,6 +138,7 @@ extern void lm3s_boardinitialize(void);
  ************************************************************************************/
 
 #ifdef CONFIG_LM3S_BOARDMAC
+struct ether_addr;
 extern void lm3s_ethernetmac(struct ether_addr *ethaddr);
 #endif
 

configs/eagle100/nettest/Make.defs

@@ -0,0 +1,120 @@
+############################################################################
+# configs/eagle100/nettest/Make.defs
+#
+#   Copyright (C) 2009 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+
+include ${TOPDIR}/.config
+
+CROSSDEV		= arm-elf-
+CC			= $(CROSSDEV)gcc
+CXX			= $(CROSSDEV)g++
+CPP			= $(CROSSDEV)gcc -E
+LD			= $(CROSSDEV)ld
+AR			= $(CROSSDEV)ar rcs
+NM			= $(CROSSDEV)nm
+OBJCOPY			= $(CROSSDEV)objcopy
+OBJDUMP			= $(CROSSDEV)objdump
+
+ARCHCCVERSION		= ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'}
+ARCHCCMAJOR		= ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1}
+
+ARCHCFLAGS		= -fno-builtin
+ARCHCXXFLAGS		= -fno-builtin -fno-exceptions
+ARCHWARNINGS		= -Wall -Wstrict-prototypes -Wshadow
+ARCHWARNINGSXX		= -Wall -Wshadow
+
+ifeq ("${CONFIG_DEBUG}","y")
+  ARCHOPTIMIZATION	= -g
+else
+  ARCHOPTIMIZATION	= -Os -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer
+endif
+
+ARCHCPUFLAGS		= -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
+ARCHDEFINES		=
+ARCHINCLUDES		= -I. -isystem $(TOPDIR)/include
+ARCHXXINCLUDES		= -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
+
+ARCHPICFLAGS		= -fpic
+ARCHSCRIPT		= -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/nettest/ld.script
+
+CFLAGS			= $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) \
+			  $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) -pipe
+CXXFLAGS		= $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) \
+			  $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) -pipe
+CPPFLAGS		= $(ARCHINCLUDES) $(ARCHDEFINES)
+AFLAGS			= $(CFLAGS) -D__ASSEMBLY__
+
+OBJEXT			= .o
+LIBEXT			= .a
+EXEEXT			=
+
+ifeq ("${CONFIG_DEBUG}","y")
+  LDFLAGS		+= -g
+endif
+
+define PREPROCESS
+	@echo "CPP: $1->$2"
+	@$(CPP) $(CPPFLAGS) $1 -o $2
+endef
+
+define COMPILE
+	@echo "CC: $1"
+	@$(CC) -c $(CFLAGS) $1 -o $2
+endef
+
+define COMPILEXX
+	@echo "CXX: $1"
+	@$(CXX) -c $(CXXFLAGS) $1 -o $2
+endef
+
+define ASSEMBLE
+	@echo "AS: $1"
+	@$(CC) -c $(AFLAGS) $1 -o $2
+endef
+
+define ARCHIVE
+	echo "AR: $2"; \
+	$(AR) $1 $2 || { echo "$(AR) $1 $2 FAILED!" ; exit 1 ; }
+endef
+
+define CLEAN
+	@rm -f *.o *.a
+endef
+
+MKDEP			= $(TOPDIR)/tools/mkdeps.sh
+
+HOSTCC			= gcc
+HOSTINCLUDES		= -I.
+HOSTCFLAGS		= -Wall -Wstrict-prototypes -Wshadow -g -pipe
+HOSTLDFLAGS		=
+

configs/eagle100/nettest/ld.script

@@ -0,0 +1,97 @@
+/****************************************************************************
+ * configs/eagle100/nettest/ld.script
+ *
+ *   Copyright (C) 2009 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/* The LM3S6918 has 256Kb of FLASH beginning at address 0x0000:0000. However,
+ * if the the Eagle100 Ethernet bootloader is used, then the entry point must
+ * be at the following offset in FLASH (and the size of the FLASH must be
+ * reduced to 248Kb):
+ */
+
+MEMORY
+{
+/*  flash (rx) : ORIGIN = 0x00000000, LENGTH = 256K */
+    flash (rx) : ORIGIN = 0x00002000, LENGTH = 248K
+    sram (rwx) : ORIGIN = 0x20000000, LENGTH = 64K
+}
+
+OUTPUT_ARCH(arm)
+ENTRY(_stext)
+SECTIONS
+{
+	.text : {
+		_stext = ABSOLUTE(.);
+		*(.vectors)
+		*(.text)
+		*(.fixup)
+		*(.gnu.warning)
+		*(.rodata)
+		*(.rodata.str1.1)
+		*(.glue_7)
+		*(.glue_7t)
+		*(.got)			/* Global offset table		*/
+		_etext = ABSOLUTE(.);
+	} > flash
+
+	_eronly = ABSOLUTE(.);		/* See below                    */
+
+	/* The LM3S6918 has 64Kb of SRAM beginning at the following address */
+
+	.data : {
+		_sdata = ABSOLUTE(.);
+		*(.data)
+		CONSTRUCTORS
+		_edata = ABSOLUTE(.);
+	} > sram AT > flash
+
+	.bss : {			/* BSS				*/
+		_sbss = ABSOLUTE(.);
+		*(.bss)
+		*(COMMON)
+		_ebss = ABSOLUTE(.);
+	} > sram
+					/* Stabs debugging sections.	*/
+	.stab 0 : { *(.stab) }
+	.stabstr 0 : { *(.stabstr) }
+	.stab.excl 0 : { *(.stab.excl) }
+	.stab.exclstr 0 : { *(.stab.exclstr) }
+	.stab.index 0 : { *(.stab.index) }
+	.stab.indexstr 0 : { *(.stab.indexstr) }
+	.comment 0 : { *(.comment) }
+	.debug_abbrev 0 : { *(.debug_abbrev) }
+	.debug_info 0 : { *(.debug_info) }
+	.debug_line 0 : { *(.debug_line) }
+	.debug_pubnames 0 : { *(.debug_pubnames) }
+	.debug_aranges 0 : { *(.debug_aranges) }
+}

configs/eagle100/nettest/setenv.sh

@@ -0,0 +1,46 @@
+#!/bin/bash
+# configs/eagle100/nettest/setenv.sh
+#
+#   Copyright (C) 2009 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+
+if [ "$(basename $0)" = "setenv.sh" ] ; then
+  echo "You must source this script, not run it!" 1>&2
+  exit 1
+fi
+
+if [ -z ${PATH_ORIG} ]; then export PATH_ORIG=${PATH}; fi
+
+WD=`pwd`
+export BUILDROOT_BIN=${WD}/../buildroot/build_arm_nofpu/staging_dir/bin
+export PATH=${BUILDROOT_BIN}:/sbin:/usr/sbin:${PATH_ORIG}
+
+echo "PATH : ${PATH}"

configs/eagle100/src/up_ethernet.c

@@ -41,6 +41,8 @@
 #include <nuttx/config.h>
 #include <sys/types.h>
 
+#include <assert.h>
+
 #include <arch/board/board.h>
 #include <net/ethernet.h>
 
@@ -71,25 +73,23 @@
 
 #ifdef CONFIG_LM3S_BOARDMAC
 void lm3s_ethernetmac(struct ether_addr *ethaddr)
-{
-struct ether_addr
 {
   uint32 user0;
   uint32 user1;
 
   /* Get the current value of the user registers */
 
-  user0 = getreg32();
+  user0 = getreg32(LM3S_FLASH_USERREG0);
-  user1 = getreg32();
+  user1 = getreg32(LM3S_FLASH_USERREG1);
   DEBUGASSERT(user0 != 0xffffffff && user1 == 0xffffffff);
 
   /* Re-format that MAC address the way that uIP expects to see it */
 
-  ethaddr->ether_addr_octet.addr[0] = ((user0 >>  0) & 0xff);
+  ethaddr->ether_addr_octet[0] = ((user0 >>  0) & 0xff);
-  ethaddr->ether_addr_octet.addr[1] = ((user0 >>  8) & 0xff);
+  ethaddr->ether_addr_octet[1] = ((user0 >>  8) & 0xff);
-  ethaddr->ether_addr_octet.addr[2] = ((user0 >> 16) & 0xff);
+  ethaddr->ether_addr_octet[2] = ((user0 >> 16) & 0xff);
-  ethaddr->ether_addr_octet.addr[3] = ((user1 >>  0) & 0xff);
+  ethaddr->ether_addr_octet[3] = ((user1 >>  0) & 0xff);
-  ethaddr->ether_addr_octet.addr[4] = ((user1 >>  8) & 0xff);
+  ethaddr->ether_addr_octet[4] = ((user1 >>  8) & 0xff);
-  ethaddr->ether_addr_octet.addr[5] = ((user1 >> 16) & 0xff);
+  ethaddr->ether_addr_octet[5] = ((user1 >> 16) & 0xff);
 }
 #endif