diff --git a/configs/stm32f746g-disco/README.txt b/configs/stm32f746g-disco/README.txt index 0b24a2c8a6d..9db3766cea8 100644 --- a/configs/stm32f746g-disco/README.txt +++ b/configs/stm32f746g-disco/README.txt @@ -49,6 +49,10 @@ STATUS 2015-07-20: STM32 F7 Ethernet appears to be functional, but has had only light testing. + 2015-07-21: Added a protected build version of the NSH configuration + (called knsh). That configuration is close: It boots, but is prone + to hard faulting. It needs a little TLC to be fully usable. + Development Environment ======================= @@ -114,16 +118,22 @@ Porting STM32 F4 Drivers The STM32F746 is very similar to the STM32 F429 and many of the drivers in the stm32/ directory could be ported here: ADC, BBSRAM, CAN, DAC, - DMA2D, FLASH, I2C, IWDG, LSE, LSI, LTDC, OTGFS, OTGHS, PM, QEncode, - RNG, RTCC, SDMMC (was SDIO), Timer/counters, and WWDG. + DMA2D, FLASH, I2C, IWDG, LSE, LSI, LTDC, OTGFS, OTGHS, PM, Quadrature + Encoder, RNG, RTCC, SDMMC (was SDIO), Timer/counters, and WWDG. Many of these drivers would be ported very simply; many ports would just - be a matter of copying files and some serach-and-replace. Like: + be a matter of copying files and some seach-and-replacement. Like: - 1. Copy the register definition file from stm32/chip to stm32f7/chip - (making name changes as appropriate). - 2. Copy the C file from stm32/ to stm32f7/ (again with naming changes). - 3. Update the Make.defs file to include the new C file. + 1. Compare the two register definitions files; make sure that the STM32 + F4 peripheral is identical (or nearly identical) to the F7 + peripheral. If so then, + 2. Copy the register definition file from the stm32/chip directory to + the stm32f7/chip directory, making name changes as appropriate and + updating the driver for any minor register differences. + 3. Copy the corresponding C file (and possibly a matching .h file) from + the stm32/ directory to the stm32f7/ directory again with naming + changes and changes for any register differences. + 4. Update the Make.defs file to include the new C file in the build. For other files, particularly those that use DMA, the port will be significantly more complex. That is because the STM32F7 has a D-Cache @@ -516,6 +526,85 @@ Configurations Configuration Directories ------------------------- + kostest: + ------- + This is identical to the nsh configuration below except that NuttX is + built as a kernel-mode, monolithic module and the user applications are + built separately. Is is recommended to use a special make command; + not just 'make' but make with the following two arguments: + + make pass1 pass2 + + In the normal case (just 'make'), make will attempt to build both user- + and kernel-mode blobs more or less interleaved. This actual works! + However, for me it is very confusing so I prefer the above make command: + Make the user-space binaries first (pass1), then make the kernel-space + binaries (pass2) + + NOTES: + + 1. At the end of the build, there will be several files in the top-level + NuttX build directory: + + PASS1: + nuttx_user.elf - The pass1 user-space ELF file + nuttx_user.hex - The pass1 Intel HEX format file (selected in defconfig) + User.map - Symbols in the user-space ELF file + + PASS2: + nuttx - The pass2 kernel-space ELF file + nuttx.hex - The pass2 Intel HEX file (selected in defconfig) + System.map - Symbols in the kernel-space ELF file + + 2. Combining .hex files. If you plan to use the STM32 ST-Link Utility to + load the .hex files into FLASH, then you need to combine the two hex + files into a single .hex file. Here is how you can do that. + + a. The 'tail' of the nuttx.hex file should look something like this + (with my comments added): + + $ tail nuttx.hex + # 00, data records + ... + :10 9DC0 00 01000000000800006400020100001F0004 + :10 9DD0 00 3B005A0078009700B500D400F300110151 + :08 9DE0 00 30014E016D0100008D + # 05, Start Linear Address Record + :04 0000 05 0800 0419 D2 + # 01, End Of File record + :00 0000 01 FF + + Use an editor such as vi to remove the 05 and 01 records. + + b. The 'head' of the nuttx_user.hex file should look something like + this (again with my comments added): + + $ head nuttx_user.hex + # 04, Extended Linear Address Record + :02 0000 04 0801 F1 + # 00, data records + :10 8000 00 BD89 01084C800108C8110208D01102087E + :10 8010 00 0010 00201C1000201C1000203C16002026 + :10 8020 00 4D80 01085D80010869800108ED83010829 + ... + + Nothing needs to be done here. The nuttx_user.hex file should + be fine. + + c. Combine the edited nuttx.hex and un-edited nuttx_user.hex + file to produce a single combined hex file: + + $ cat nuttx.hex nuttx_user.hex >combined.hex + + Then use the combined.hex file with the STM32 ST-Link tool. The + mbed interface does not seem to except .hex files, but you can + also convert the .hex file to binary with this command: + + arm-none-eabi-objcopy.exe -I ihex -O binary combined.hex combined.bin + + If you do this a lot, you will probably want to invest a little time + to develop a tool to automate these steps. + netnsh: ------ This is a NetShell (NSH) very similar to the nsh configuration described diff --git a/configs/stm32f746g-disco/kernel/.gitignore b/configs/stm32f746g-disco/kernel/.gitignore new file mode 100644 index 00000000000..7bacd5aee3e --- /dev/null +++ b/configs/stm32f746g-disco/kernel/.gitignore @@ -0,0 +1,2 @@ +/nuttx_user.elf + diff --git a/configs/stm32f746g-disco/kernel/Makefile b/configs/stm32f746g-disco/kernel/Makefile new file mode 100644 index 00000000000..b0f3683cf68 --- /dev/null +++ b/configs/stm32f746g-disco/kernel/Makefile @@ -0,0 +1,122 @@ +############################################################################ +# configs/stm32f746g-disco/kernel/Makefile +# +# Copyright (C) 2015 Gregory Nutt. All rights reserved. +# Author: Gregory Nutt +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# +# 1. Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# 2. Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in +# the documentation and/or other materials provided with the +# distribution. +# 3. Neither the name NuttX nor the names of its contributors may be +# used to endorse or promote products derived from this software +# without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS +# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED +# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN +# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +# POSSIBILITY OF SUCH DAMAGE. +# +############################################################################ + +-include $(TOPDIR)/Make.defs + +# This is the directory for the board-specific header files + +BOARD_INCLUDE = $(TOPDIR)$(DELIM)configs$(DELIM)$(CONFIG_ARCH_BOARD)$(DELIM)include + +# The entry point name (if none is provided in the .config file) + +CONFIG_USER_ENTRYPOINT ?= user_start +ENTRYPT = $(patsubst "%",%,$(CONFIG_USER_ENTRYPOINT)) + +# Get the paths to the libraries and the links script path in format that +# is appropriate for the host OS + +ifeq ($(WINTOOL),y) + # Windows-native toolchains + USER_LIBPATHS = ${shell for path in $(USERLIBS); do dir=`dirname $(TOPDIR)$(DELIM)$$path`;echo "-L\"`cygpath -w $$dir`\"";done} + USER_LDSCRIPT = -T "${shell cygpath -w $(TOPDIR)$(DELIM)configs$(DELIM)$(CONFIG_ARCH_BOARD)$(DELIM)scripts$(DELIM)memory.ld}" + USER_LDSCRIPT += -T "${shell cygpath -w $(TOPDIR)$(DELIM)configs$(DELIM)$(CONFIG_ARCH_BOARD)$(DELIM)scripts$(DELIM)user-space.ld}" + USER_HEXFILE += "${shell cygpath -w $(TOPDIR)$(DELIM)nuttx_user.hex}" + USER_SRECFILE += "${shell cygpath -w $(TOPDIR)$(DELIM)nuttx_user.srec}" + USER_BINFILE += "${shell cygpath -w $(TOPDIR)$(DELIM)nuttx_user.bin}" +else + # Linux/Cygwin-native toolchain + USER_LIBPATHS = $(addprefix -L$(TOPDIR)$(DELIM),$(dir $(USERLIBS))) + USER_LDSCRIPT = -T$(TOPDIR)$(DELIM)configs$(DELIM)$(CONFIG_ARCH_BOARD)$(DELIM)scripts$(DELIM)memory.ld + USER_LDSCRIPT += -T$(TOPDIR)$(DELIM)configs$(DELIM)$(CONFIG_ARCH_BOARD)$(DELIM)scripts$(DELIM)user-space.ld + USER_HEXFILE += "$(TOPDIR)$(DELIM)nuttx_user.hex" + USER_SRECFILE += "$(TOPDIR)$(DELIM)nuttx_user.srec" + USER_BINFILE += "$(TOPDIR)$(DELIM)nuttx_user.bin" +endif + +USER_LDFLAGS = --undefined=$(ENTRYPT) --entry=$(ENTRYPT) $(USER_LDSCRIPT) +USER_LDLIBS = $(patsubst lib%,-l%,$(basename $(notdir $(USERLIBS)))) +USER_LIBGCC = "${shell $(CC) -print-libgcc-file-name}" + +# Source files + +CSRCS = stm32_userspace.c +COBJS = $(CSRCS:.c=$(OBJEXT)) +OBJS = $(COBJS) + +# Targets: + +all: $(TOPDIR)$(DELIM)nuttx_user.elf $(TOPDIR)$(DELIM)User.map +.PHONY: nuttx_user.elf depend clean distclean + +$(COBJS): %$(OBJEXT): %.c + $(call COMPILE, $<, $@) + +# Create the nuttx_user.elf file containing all of the user-mode code + +nuttx_user.elf: $(OBJS) + $(Q) $(LD) -o $@ $(USER_LDFLAGS) $(USER_LIBPATHS) $(OBJS) --start-group $(USER_LDLIBS) --end-group $(USER_LIBGCC) + +$(TOPDIR)$(DELIM)nuttx_user.elf: nuttx_user.elf + @echo "LD: nuttx_user.elf" + $(Q) cp -a nuttx_user.elf $(TOPDIR)$(DELIM)nuttx_user.elf +ifeq ($(CONFIG_INTELHEX_BINARY),y) + @echo "CP: nuttx_user.hex" + $(Q) $(OBJCOPY) $(OBJCOPYARGS) -O ihex nuttx_user.elf $(USER_HEXFILE) +endif +ifeq ($(CONFIG_MOTOROLA_SREC),y) + @echo "CP: nuttx_user.srec" + $(Q) $(OBJCOPY) $(OBJCOPYARGS) -O srec nuttx_user.elf $(USER_SRECFILE) +endif +ifeq ($(CONFIG_RAW_BINARY),y) + @echo "CP: nuttx_user.bin" + $(Q) $(OBJCOPY) $(OBJCOPYARGS) -O binary nuttx_user.elf $(USER_BINFILE) +endif + +$(TOPDIR)$(DELIM)User.map: nuttx_user.elf + @echo "MK: User.map" + $(Q) $(NM) nuttx_user.elf >$(TOPDIR)$(DELIM)User.map + $(Q) $(CROSSDEV)size nuttx_user.elf + +.depend: + +depend: .depend + +clean: + $(call DELFILE, nuttx_user.elf) + $(call DELFILE, "$(TOPDIR)$(DELIM)nuttx_user.*") + $(call DELFILE, "$(TOPDIR)$(DELIM)User.map") + $(call CLEAN) + +distclean: clean diff --git a/configs/stm32f746g-disco/kernel/stm32_userspace.c b/configs/stm32f746g-disco/kernel/stm32_userspace.c new file mode 100644 index 00000000000..427a763e4ab --- /dev/null +++ b/configs/stm32f746g-disco/kernel/stm32_userspace.c @@ -0,0 +1,133 @@ +/**************************************************************************** + * configs/stm32f746g-disco/kernel/stm32_userspace.c + * + * Copyright (C) 2015 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/**************************************************************************** + * Included Files + ****************************************************************************/ + +#include + +#include + +#include +#include +#include +#include + +#if defined(CONFIG_BUILD_PROTECTED) && !defined(__KERNEL__) + +/**************************************************************************** + * Pre-processor Definitions + ****************************************************************************/ +/* Configuration ************************************************************/ + +#ifndef CONFIG_NUTTX_USERSPACE +# error "CONFIG_NUTTX_USERSPACE not defined" +#endif + +#if CONFIG_NUTTX_USERSPACE != 0x08020000 +# error "CONFIG_NUTTX_USERSPACE must be 0x08020000 to match memory.ld" +#endif + +/**************************************************************************** + * Public Data + ****************************************************************************/ + +/* These 'addresses' of these values are setup by the linker script. They are + * not actual uint32_t storage locations! They are only used meaningfully in the + * following way: + * + * - The linker script defines, for example, the symbol_sdata. + * - The declaration extern uint32_t _sdata; makes C happy. C will believe + * that the value _sdata is the address of a uint32_t variable _data (it is + * not!). + * - We can recover the linker value then by simply taking the address of + * of _data. like: uint32_t *pdata = &_sdata; + */ + +extern uint32_t _stext; /* Start of .text */ +extern uint32_t _etext; /* End_1 of .text + .rodata */ +extern const uint32_t _eronly; /* End+1 of read only section (.text + .rodata) */ +extern uint32_t _sdata; /* Start of .data */ +extern uint32_t _edata; /* End+1 of .data */ +extern uint32_t _sbss; /* Start of .bss */ +extern uint32_t _ebss; /* End+1 of .bss */ + +/* This is the user space entry point */ + +int CONFIG_USER_ENTRYPOINT(int argc, char *argv[]); + +const struct userspace_s userspace __attribute__ ((section (".userspace"))) = +{ + /* General memory map */ + + .us_entrypoint = (main_t)CONFIG_USER_ENTRYPOINT, + .us_textstart = (uintptr_t)&_stext, + .us_textend = (uintptr_t)&_etext, + .us_datasource = (uintptr_t)&_eronly, + .us_datastart = (uintptr_t)&_sdata, + .us_dataend = (uintptr_t)&_edata, + .us_bssstart = (uintptr_t)&_sbss, + .us_bssend = (uintptr_t)&_ebss, + + /* Memory manager heap structure */ + + .us_heap = &g_mmheap, + + /* Task/thread startup routines */ + + .task_startup = task_startup, +#ifndef CONFIG_DISABLE_PTHREAD + .pthread_startup = pthread_startup, +#endif + + /* Signal handler trampoline */ + +#ifndef CONFIG_DISABLE_SIGNALS + .signal_handler = up_signal_handler, +#endif + + /* User-space work queue support (declared in include/nuttx/wqueue.h) */ + +#ifdef CONFIG_LIB_USRWORK + .work_usrstart = work_usrstart, +#endif +}; + +/**************************************************************************** + * Public Functions + ****************************************************************************/ + +#endif /* CONFIG_BUILD_PROTECTED && !__KERNEL__ */ diff --git a/configs/stm32f746g-disco/knsh/Make.defs b/configs/stm32f746g-disco/knsh/Make.defs new file mode 100644 index 00000000000..f63eb31fce4 --- /dev/null +++ b/configs/stm32f746g-disco/knsh/Make.defs @@ -0,0 +1,112 @@ +############################################################################ +# configs/stm32f746g-disco/knsh/Make.defs +# +# Copyright (C) 2015 Gregory Nutt. All rights reserved. +# Author: Gregory Nutt +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# +# 1. Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# 2. Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in +# the documentation and/or other materials provided with the +# distribution. +# 3. Neither the name NuttX nor the names of its contributors may be +# used to endorse or promote products derived from this software +# without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS +# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED +# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN +# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +# POSSIBILITY OF SUCH DAMAGE. +# +############################################################################ + +include ${TOPDIR}/.config +include ${TOPDIR}/tools/Config.mk +include ${TOPDIR}/arch/arm/src/armv7-m/Toolchain.defs + +LDSCRIPT = flash.ld + +ifeq ($(WINTOOL),y) + # Windows-native toolchains + DIRLINK = $(TOPDIR)/tools/copydir.sh + DIRUNLINK = $(TOPDIR)/tools/unlink.sh + MKDEP = $(TOPDIR)/tools/mknulldeps.sh + ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" + ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}" + ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}" +else + # Linux/Cygwin-native toolchain + MKDEP = $(TOPDIR)/tools/mkdeps.sh + ARCHINCLUDES = -I. -isystem $(TOPDIR)/include + ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx + ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT) +endif + +CC = $(CROSSDEV)gcc +CXX = $(CROSSDEV)g++ +CPP = $(CROSSDEV)gcc -E +LD = $(CROSSDEV)ld +AR = $(ARCROSSDEV)ar rcs +NM = $(ARCROSSDEV)nm +OBJCOPY = $(CROSSDEV)objcopy +OBJDUMP = $(CROSSDEV)objdump + +ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'} +ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1} + +ifeq ($(CONFIG_DEBUG_SYMBOLS),y) + ARCHOPTIMIZATION = -g +endif + +ifneq ($(CONFIG_DEBUG_NOOPT),y) + ARCHOPTIMIZATION += $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer +endif + +ARCHCFLAGS = -fno-builtin +ARCHCXXFLAGS = -fno-builtin -fno-exceptions -fno-rtti +ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow +ARCHWARNINGSXX = -Wall -Wshadow +ARCHDEFINES = +ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10 + +CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe +CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS) +CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe +CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS) +CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) +AFLAGS = $(CFLAGS) -D__ASSEMBLY__ + +NXFLATLDFLAGS1 = -r -d -warn-common +NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat-pcrel.ld -no-check-sections +LDNXFLATFLAGS = -e main -s 2048 + +OBJEXT = .o +LIBEXT = .a +EXEEXT = + +ifneq ($(CROSSDEV),arm-nuttx-elf-) + LDFLAGS += -nostartfiles -nodefaultlibs +endif +ifeq ($(CONFIG_DEBUG_SYMBOLS),y) + LDFLAGS += -g +endif + + +HOSTCC = gcc +HOSTINCLUDES = -I. +HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe +HOSTLDFLAGS = + diff --git a/configs/stm32f746g-disco/knsh/defconfig b/configs/stm32f746g-disco/knsh/defconfig new file mode 100644 index 00000000000..5b151c127c8 --- /dev/null +++ b/configs/stm32f746g-disco/knsh/defconfig @@ -0,0 +1,859 @@ +# +# Automatically generated file; DO NOT EDIT. +# Nuttx/ Configuration +# + +# +# Build Setup +# +# CONFIG_EXPERIMENTAL is not set +# CONFIG_DEFAULT_SMALL is not set +# CONFIG_HOST_LINUX is not set +# CONFIG_HOST_OSX is not set +CONFIG_HOST_WINDOWS=y +# CONFIG_HOST_OTHER is not set +# CONFIG_WINDOWS_NATIVE is not set +CONFIG_WINDOWS_CYGWIN=y +# CONFIG_WINDOWS_MSYS is not set +# CONFIG_WINDOWS_OTHER is not set + +# +# Build Configuration +# +# CONFIG_APPS_DIR="../apps" +# CONFIG_BUILD_FLAT is not set +CONFIG_BUILD_PROTECTED=y +CONFIG_BUILD_2PASS=y +CONFIG_PASS1_TARGET="all" +CONFIG_PASS1_BUILDIR="configs/stm32f746g-disco/kernel" +CONFIG_PASS1_OBJECT="" +CONFIG_NUTTX_USERSPACE=0x08020000 + +# +# Binary Output Formats +# +# CONFIG_RRLOAD_BINARY is not set +CONFIG_INTELHEX_BINARY=y +# CONFIG_MOTOROLA_SREC is not set +CONFIG_RAW_BINARY=y +# CONFIG_UBOOT_UIMAGE is not set + +# +# Customize Header Files +# +# CONFIG_ARCH_STDINT_H is not set +# CONFIG_ARCH_STDBOOL_H is not set +# CONFIG_ARCH_MATH_H is not set +# CONFIG_ARCH_FLOAT_H is not set +# CONFIG_ARCH_STDARG_H is not set + +# +# Debug Options +# +# CONFIG_DEBUG is not set +CONFIG_ARCH_HAVE_HEAPCHECK=y +CONFIG_ARCH_HAVE_STACKCHECK=y +# CONFIG_STACK_COLORATION is not set +CONFIG_DEBUG_SYMBOLS=y +CONFIG_ARCH_HAVE_CUSTOMOPT=y +CONFIG_DEBUG_NOOPT=y +# CONFIG_DEBUG_CUSTOMOPT is not set +# CONFIG_DEBUG_FULLOPT is not set + +# +# System Type +# +CONFIG_ARCH_ARM=y +# CONFIG_ARCH_AVR is not set +# CONFIG_ARCH_HC is not set +# CONFIG_ARCH_MIPS is not set +# CONFIG_ARCH_RGMP is not set +# CONFIG_ARCH_SH is not set +# CONFIG_ARCH_SIM is not set +# CONFIG_ARCH_X86 is not set +# CONFIG_ARCH_Z16 is not set +# CONFIG_ARCH_Z80 is not set +CONFIG_ARCH="arm" + +# +# ARM Options +# +# CONFIG_ARCH_CHIP_A1X is not set +# CONFIG_ARCH_CHIP_C5471 is not set +# CONFIG_ARCH_CHIP_CALYPSO is not set +# CONFIG_ARCH_CHIP_DM320 is not set +# CONFIG_ARCH_CHIP_EFM32 is not set +# CONFIG_ARCH_CHIP_IMX is not set +# CONFIG_ARCH_CHIP_KINETIS is not set +# CONFIG_ARCH_CHIP_KL is not set +# CONFIG_ARCH_CHIP_LM is not set +# CONFIG_ARCH_CHIP_TIVA is not set +# CONFIG_ARCH_CHIP_LPC11XX is not set +# CONFIG_ARCH_CHIP_LPC17XX is not set +# CONFIG_ARCH_CHIP_LPC214X is not set +# CONFIG_ARCH_CHIP_LPC2378 is not set +# CONFIG_ARCH_CHIP_LPC31XX is not set +# CONFIG_ARCH_CHIP_LPC43XX is not set +# CONFIG_ARCH_CHIP_NUC1XX is not set +# CONFIG_ARCH_CHIP_SAMA5 is not set +# CONFIG_ARCH_CHIP_SAMD is not set +# CONFIG_ARCH_CHIP_SAML is not set +# CONFIG_ARCH_CHIP_SAM34 is not set +# CONFIG_ARCH_CHIP_SAMV7 is not set +# CONFIG_ARCH_CHIP_STM32 is not set +CONFIG_ARCH_CHIP_STM32F7=y +# CONFIG_ARCH_CHIP_STR71X is not set +# CONFIG_ARCH_ARM7TDMI is not set +# CONFIG_ARCH_ARM926EJS is not set +# CONFIG_ARCH_ARM920T is not set +# CONFIG_ARCH_CORTEXM0 is not set +# CONFIG_ARCH_CORTEXM3 is not set +# CONFIG_ARCH_CORTEXM4 is not set +CONFIG_ARCH_CORTEXM7=y +# CONFIG_ARCH_CORTEXA5 is not set +# CONFIG_ARCH_CORTEXA8 is not set +CONFIG_ARCH_FAMILY="armv7-m" +CONFIG_ARCH_CHIP="stm32f7" +# CONFIG_ARMV7M_USEBASEPRI is not set +CONFIG_ARCH_HAVE_CMNVECTOR=y +CONFIG_ARMV7M_CMNVECTOR=y +# CONFIG_ARMV7M_LAZYFPU is not set +CONFIG_ARCH_HAVE_FPU=y +CONFIG_ARCH_HAVE_DPFPU=y +# CONFIG_ARCH_FPU is not set +CONFIG_ARMV7M_MPU=y +CONFIG_ARMV7M_MPU_NREGIONS=16 + +# +# ARMV7M Configuration Options +# +CONFIG_ARMV7M_HAVE_ICACHE=y +CONFIG_ARMV7M_HAVE_DCACHE=y +CONFIG_ARMV7M_ICACHE=y +CONFIG_ARMV7M_DCACHE=y +CONFIG_ARMV7M_DCACHE_WRITETHROUGH=y +CONFIG_ARMV7M_HAVE_ITCM=y +CONFIG_ARMV7M_HAVE_DTCM=y +# CONFIG_ARMV7M_ITCM is not set +CONFIG_ARMV7M_DTCM=y +# CONFIG_ARMV7M_TOOLCHAIN_ATOLLIC is not set +# CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT is not set +# CONFIG_ARMV7M_TOOLCHAIN_CODEREDW is not set +# CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYW is not set +# CONFIG_ARMV7M_TOOLCHAIN_DEVKITARM is not set +# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIL is not set +CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIW=y +# CONFIG_ARMV7M_TOOLCHAIN_RAISONANCE is not set +CONFIG_ARMV7M_HAVE_STACKCHECK=y +# CONFIG_ARMV7M_STACKCHECK is not set +# CONFIG_ARMV7M_ITMSYSLOG is not set +# CONFIG_SERIAL_TERMIOS is not set + +# +# STM32 F7 Configuration Options +# +# CONFIG_ARCH_CHIP_STM32F745 is not set +CONFIG_ARCH_CHIP_STM32F746=y +# CONFIG_ARCH_CHIP_STM32F756 is not set +CONFIG_STM32F7_STM32F74XX=y +# CONFIG_STM32F7_STM32F75XX is not set +# CONFIG_STM32F7_FLASH_512KB is not set +CONFIG_STM32F7_FLASH_1024KB=y + +# +# STM32 Peripheral Support +# +CONFIG_STM32F7_HAVE_LTDC=y +# CONFIG_STM32F7_ADC is not set +# CONFIG_STM32F7_CAN is not set +# CONFIG_STM32F7_DAC is not set +# CONFIG_STM32F7_DMA is not set +# CONFIG_STM32F7_I2C is not set +# CONFIG_STM32F7_SAI is not set +# CONFIG_STM32F7_SPI is not set +CONFIG_STM32F7_USART=y +# CONFIG_STM32F7_ADC1 is not set +# CONFIG_STM32F7_ADC2 is not set +# CONFIG_STM32F7_ADC3 is not set +# CONFIG_STM32F7_BKPSRAM is not set +# CONFIG_STM32F7_CAN1 is not set +# CONFIG_STM32F7_CAN2 is not set +# CONFIG_STM32F7_CEC is not set +# CONFIG_STM32F7_CRC is not set +# CONFIG_STM32F7_CRYP is not set +# CONFIG_STM32F7_DMA1 is not set +# CONFIG_STM32F7_DMA2 is not set +# CONFIG_STM32F7_DAC1 is not set +# CONFIG_STM32F7_DAC2 is not set +# CONFIG_STM32F7_DCMI is not set +# CONFIG_STM32F7_ETHMAC is not set +# CONFIG_STM32F7_FSMC is not set +# CONFIG_STM32F7_I2C1 is not set +# CONFIG_STM32F7_I2C2 is not set +# CONFIG_STM32F7_I2C3 is not set +# CONFIG_STM32F7_LPTIM1 is not set +# CONFIG_STM32F7_LTDC is not set +# CONFIG_STM32F7_DMA2D is not set +# CONFIG_STM32F7_OTGFS is not set +# CONFIG_STM32F7_OTGHS is not set +# CONFIG_STM32F7_QUADSPI is not set +# CONFIG_STM32F7_SAI1 is not set +# CONFIG_STM32F7_RNG is not set +# CONFIG_STM32F7_SAI2 is not set +# CONFIG_STM32F7_SDMMC1 is not set +# CONFIG_STM32F7_SPDIFRX is not set +# CONFIG_STM32F7_SPI1 is not set +# CONFIG_STM32F7_SPI2 is not set +# CONFIG_STM32F7_SPI3 is not set +# CONFIG_STM32F7_SPI4 is not set +# CONFIG_STM32F7_SPI5 is not set +# CONFIG_STM32F7_SPI6 is not set +# CONFIG_STM32F7_TIM1 is not set +# CONFIG_STM32F7_TIM2 is not set +# CONFIG_STM32F7_TIM3 is not set +# CONFIG_STM32F7_TIM4 is not set +# CONFIG_STM32F7_TIM5 is not set +# CONFIG_STM32F7_TIM6 is not set +# CONFIG_STM32F7_TIM7 is not set +# CONFIG_STM32F7_TIM8 is not set +# CONFIG_STM32F7_TIM9 is not set +# CONFIG_STM32F7_TIM10 is not set +# CONFIG_STM32F7_TIM11 is not set +# CONFIG_STM32F7_TIM12 is not set +# CONFIG_STM32F7_TIM13 is not set +# CONFIG_STM32F7_TIM14 is not set +# CONFIG_STM32F7_TIM15 is not set +# CONFIG_STM32F7_USART1 is not set +# CONFIG_STM32F7_USART2 is not set +# CONFIG_STM32F7_USART3 is not set +# CONFIG_STM32F7_UART4 is not set +# CONFIG_STM32F7_UART5 is not set +CONFIG_STM32F7_USART6=y +# CONFIG_STM32F7_UART7 is not set +# CONFIG_STM32F7_UART8 is not set +# CONFIG_STM32F7_IWDG is not set +# CONFIG_STM32F7_WWDG is not set +# CONFIG_STM32F7_CUSTOM_CLOCKCONFIG is not set + +# +# Architecture Options +# +# CONFIG_ARCH_NOINTC is not set +# CONFIG_ARCH_VECNOTIRQ is not set +# CONFIG_ARCH_DMA is not set +CONFIG_ARCH_HAVE_IRQPRIO=y +# CONFIG_ARCH_L2CACHE is not set +# CONFIG_ARCH_HAVE_COHERENT_DCACHE is not set +# CONFIG_ARCH_HAVE_ADDRENV is not set +# CONFIG_ARCH_NEED_ADDRENV_MAPPING is not set +CONFIG_ARCH_HAVE_VFORK=y +# CONFIG_ARCH_HAVE_MMU is not set +CONFIG_ARCH_HAVE_MPU=y +# CONFIG_ARCH_NAND_HWECC is not set +# CONFIG_ARCH_HAVE_EXTCLK is not set +# CONFIG_ARCH_HAVE_POWEROFF is not set +# CONFIG_ARCH_HAVE_RESET is not set +CONFIG_ARCH_USE_MPU=y +# CONFIG_ARCH_IRQPRIO is not set +CONFIG_ARCH_STACKDUMP=y +# CONFIG_ENDIAN_BIG is not set +# CONFIG_ARCH_IDLE_CUSTOM is not set +# CONFIG_ARCH_HAVE_RAMFUNCS is not set +CONFIG_ARCH_HAVE_RAMVECTORS=y +# CONFIG_ARCH_RAMVECTORS is not set + +# +# Board Settings +# +CONFIG_BOARD_LOOPSPERMSEC=43103 +# CONFIG_ARCH_CALIBRATION is not set + +# +# Interrupt options +# +CONFIG_ARCH_HAVE_INTERRUPTSTACK=y +CONFIG_ARCH_INTERRUPTSTACK=0 +CONFIG_ARCH_HAVE_HIPRI_INTERRUPT=y +# CONFIG_ARCH_HIPRI_INTERRUPT is not set + +# +# Boot options +# +# CONFIG_BOOT_RUNFROMEXTSRAM is not set +CONFIG_BOOT_RUNFROMFLASH=y +# CONFIG_BOOT_RUNFROMISRAM is not set +# CONFIG_BOOT_RUNFROMSDRAM is not set +# CONFIG_BOOT_COPYTORAM is not set + +# +# Boot Memory Configuration +# +CONFIG_RAM_START=0x20010000 +CONFIG_RAM_SIZE=245760 +# CONFIG_ARCH_HAVE_SDRAM is not set + +# +# Board Selection +# +CONFIG_ARCH_BOARD_STM32F746G_DISCO=y +# CONFIG_ARCH_BOARD_CUSTOM is not set +CONFIG_ARCH_BOARD="stm32f746g-disco" + +# +# Common Board Options +# +CONFIG_ARCH_HAVE_LEDS=y +CONFIG_ARCH_LEDS=y +CONFIG_ARCH_HAVE_BUTTONS=y +CONFIG_ARCH_BUTTONS=y +CONFIG_ARCH_HAVE_IRQBUTTONS=y +# CONFIG_ARCH_IRQBUTTONS is not set +CONFIG_NSH_MMCSDMINOR=0 + +# +# Board-Specific Options +# +# CONFIG_LIB_BOARDCTL is not set + +# +# RTOS Features +# +CONFIG_DISABLE_OS_API=y +# CONFIG_DISABLE_POSIX_TIMERS is not set +# CONFIG_DISABLE_PTHREAD is not set +# CONFIG_DISABLE_SIGNALS is not set +# CONFIG_DISABLE_MQUEUE is not set +# CONFIG_DISABLE_ENVIRON is not set + +# +# Clocks and Timers +# +CONFIG_USEC_PER_TICK=10000 +# CONFIG_SYSTEM_TIME64 is not set +# CONFIG_CLOCK_MONOTONIC is not set +# CONFIG_JULIAN_TIME is not set +CONFIG_START_YEAR=2011 +CONFIG_START_MONTH=12 +CONFIG_START_DAY=6 +CONFIG_MAX_WDOGPARMS=2 +CONFIG_PREALLOC_WDOGS=4 +CONFIG_WDOG_INTRESERVE=0 +CONFIG_PREALLOC_TIMERS=4 + +# +# Tasks and Scheduling +# +# CONFIG_INIT_NONE is not set +CONFIG_INIT_ENTRYPOINT=y +# CONFIG_INIT_FILEPATH is not set +CONFIG_USER_ENTRYPOINT="nsh_main" +CONFIG_RR_INTERVAL=200 +CONFIG_TASK_NAME_SIZE=0 +CONFIG_MAX_TASKS=16 +# CONFIG_SCHED_HAVE_PARENT is not set +CONFIG_SCHED_WAITPID=y + +# +# Pthread Options +# +# CONFIG_MUTEX_TYPES is not set +CONFIG_NPTHREAD_KEYS=4 + +# +# Performance Monitoring +# +# CONFIG_SCHED_CPULOAD is not set +# CONFIG_SCHED_INSTRUMENTATION is not set + +# +# Files and I/O +# +CONFIG_DEV_CONSOLE=y +# CONFIG_FDCLONE_DISABLE is not set +# CONFIG_FDCLONE_STDIO is not set +CONFIG_SDCLONE_DISABLE=y +CONFIG_NFILE_DESCRIPTORS=8 +CONFIG_NFILE_STREAMS=8 +CONFIG_NAME_MAX=32 +# CONFIG_PRIORITY_INHERITANCE is not set + +# +# RTOS hooks +# +# CONFIG_BOARD_INITIALIZE is not set +# CONFIG_SCHED_STARTHOOK is not set +# CONFIG_SCHED_ATEXIT is not set +# CONFIG_SCHED_ONEXIT is not set + +# +# Signal Numbers +# +CONFIG_SIG_SIGUSR1=1 +CONFIG_SIG_SIGUSR2=2 +CONFIG_SIG_SIGALARM=3 +CONFIG_SIG_SIGCONDTIMEDOUT=16 + +# +# POSIX Message Queue Options +# +CONFIG_PREALLOC_MQ_MSGS=4 +CONFIG_MQ_MAXMSGSIZE=32 + +# +# Work Queue Support +# +# CONFIG_SCHED_WORKQUEUE is not set +# CONFIG_SCHED_HPWORK is not set +# CONFIG_SCHED_LPWORK is not set + +# +# Stack and heap information +# +CONFIG_IDLETHREAD_STACKSIZE=1024 +CONFIG_USERMAIN_STACKSIZE=2048 +CONFIG_PTHREAD_STACK_MIN=256 +CONFIG_PTHREAD_STACK_DEFAULT=2048 +CONFIG_LIB_SYSCALL=y +CONFIG_SYS_RESERVED=8 +CONFIG_SYS_NNEST=2 + +# +# Device Drivers +# +CONFIG_DISABLE_POLL=y +CONFIG_DEV_NULL=y +# CONFIG_DEV_ZERO is not set +# CONFIG_LOOP is not set + +# +# Buffering +# +# CONFIG_DRVR_WRITEBUFFER is not set +# CONFIG_DRVR_READAHEAD is not set +# CONFIG_RAMDISK is not set +# CONFIG_CAN is not set +# CONFIG_ARCH_HAVE_PWM_PULSECOUNT is not set +# CONFIG_PWM is not set +CONFIG_ARCH_HAVE_I2CRESET=y +# CONFIG_I2C is not set +CONFIG_SPI=y +# CONFIG_SPI_OWNBUS is not set +CONFIG_SPI_EXCHANGE=y +# CONFIG_SPI_CMDDATA is not set +# CONFIG_SPI_CALLBACK is not set +# CONFIG_SPI_BITBANG is not set +# CONFIG_I2S is not set + +# +# Timer Driver Support +# +# CONFIG_TIMER is not set +# CONFIG_RTC is not set +# CONFIG_WATCHDOG is not set +# CONFIG_ANALOG is not set +# CONFIG_AUDIO_DEVICES is not set +# CONFIG_VIDEO_DEVICES is not set +# CONFIG_BCH is not set +# CONFIG_INPUT is not set +# CONFIG_IOEXPANDER is not set +# CONFIG_LCD is not set +# CONFIG_MMCSD is not set +# CONFIG_MTD is not set +# CONFIG_EEPROM is not set +# CONFIG_PIPES is not set +# CONFIG_PM is not set +# CONFIG_POWER is not set +# CONFIG_SENSORS is not set +# CONFIG_SERCOMM_CONSOLE is not set +CONFIG_SERIAL=y +# CONFIG_DEV_LOWCONSOLE is not set +# CONFIG_16550_UART is not set +# CONFIG_ARCH_HAVE_UART is not set +# CONFIG_ARCH_HAVE_UART0 is not set +# CONFIG_ARCH_HAVE_UART1 is not set +# CONFIG_ARCH_HAVE_UART2 is not set +# CONFIG_ARCH_HAVE_UART3 is not set +# CONFIG_ARCH_HAVE_UART4 is not set +# CONFIG_ARCH_HAVE_UART5 is not set +# CONFIG_ARCH_HAVE_UART6 is not set +# CONFIG_ARCH_HAVE_UART7 is not set +# CONFIG_ARCH_HAVE_UART8 is not set +# CONFIG_ARCH_HAVE_SCI0 is not set +# CONFIG_ARCH_HAVE_SCI1 is not set +# CONFIG_ARCH_HAVE_USART0 is not set +# CONFIG_ARCH_HAVE_USART1 is not set +# CONFIG_ARCH_HAVE_USART2 is not set +# CONFIG_ARCH_HAVE_USART3 is not set +# CONFIG_ARCH_HAVE_USART4 is not set +# CONFIG_ARCH_HAVE_USART5 is not set +CONFIG_ARCH_HAVE_USART6=y +# CONFIG_ARCH_HAVE_USART7 is not set +# CONFIG_ARCH_HAVE_USART8 is not set +# CONFIG_ARCH_HAVE_OTHER_UART is not set + +# +# USART Configuration +# +CONFIG_USART6_ISUART=y +CONFIG_MCU_SERIAL=y +CONFIG_STANDARD_SERIAL=y +# CONFIG_SERIAL_IFLOWCONTROL is not set +# CONFIG_SERIAL_OFLOWCONTROL is not set +CONFIG_ARCH_HAVE_SERIAL_TERMIOS=y +CONFIG_USART6_SERIAL_CONSOLE=y +# CONFIG_OTHER_SERIAL_CONSOLE is not set +# CONFIG_NO_SERIAL_CONSOLE is not set + +# +# USART6 Configuration +# +CONFIG_USART6_RXBUFSIZE=256 +CONFIG_USART6_TXBUFSIZE=256 +CONFIG_USART6_BAUD=115200 +CONFIG_USART6_BITS=8 +CONFIG_USART6_PARITY=0 +CONFIG_USART6_2STOP=0 +# CONFIG_USART6_IFLOWCONTROL is not set +# CONFIG_USART6_OFLOWCONTROL is not set +# CONFIG_USBDEV is not set +# CONFIG_USBHOST is not set +# CONFIG_WIRELESS is not set + +# +# System Logging Device Options +# + +# +# System Logging +# +# CONFIG_RAMLOG is not set +# CONFIG_SYSLOG_CONSOLE is not set + +# +# Networking Support +# +# CONFIG_ARCH_HAVE_NET is not set +# CONFIG_ARCH_HAVE_PHY is not set +# CONFIG_NET is not set + +# +# Crypto API +# +# CONFIG_CRYPTO is not set + +# +# File Systems +# + +# +# File system configuration +# +# CONFIG_DISABLE_MOUNTPOINT is not set +# CONFIG_FS_AUTOMOUNTER is not set +# CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set +# CONFIG_FS_READABLE is not set +# CONFIG_FS_WRITABLE is not set +# CONFIG_FS_NAMED_SEMAPHORES is not set +CONFIG_FS_MQUEUE_MPATH="/var/mqueue" +# CONFIG_FS_RAMMAP is not set +# CONFIG_FS_FAT is not set +# CONFIG_FS_NXFFS is not set +# CONFIG_FS_ROMFS is not set +# CONFIG_FS_SMARTFS is not set +# CONFIG_FS_PROCFS is not set +# CONFIG_FS_UNIONFS is not set + +# +# System Logging +# +# CONFIG_SYSLOG is not set +# CONFIG_SYSLOG_TIMESTAMP is not set + +# +# Graphics Support +# +# CONFIG_NX is not set + +# +# Memory Management +# +CONFIG_MM_KERNEL_HEAP=y +CONFIG_MM_KERNEL_HEAPSIZE=8192 +# CONFIG_MM_SMALL is not set +CONFIG_MM_REGIONS=2 +# CONFIG_ARCH_HAVE_HEAP2 is not set +# CONFIG_GRAN is not set + +# +# Audio Support +# +# CONFIG_AUDIO is not set + +# +# Binary Loader +# +# CONFIG_BINFMT_DISABLE is not set +# CONFIG_BINFMT_EXEPATH is not set +# CONFIG_NXFLAT is not set +# CONFIG_ELF is not set +# CONFIG_PIC is not set +# CONFIG_SYMTAB_ORDEREDBYNAME is not set + +# +# Library Routines +# + +# +# Standard C Library Options +# +CONFIG_STDIO_BUFFER_SIZE=64 +CONFIG_STDIO_LINEBUFFER=y +CONFIG_NUNGET_CHARS=2 +CONFIG_LIB_HOMEDIR="/" +# CONFIG_LIBM is not set +# CONFIG_NOPRINTF_FIELDWIDTH is not set +# CONFIG_LIBC_FLOATINGPOINT is not set +CONFIG_LIBC_LONG_LONG=y +# CONFIG_LIBC_IOCTL_VARIADIC is not set +CONFIG_LIB_RAND_ORDER=1 +# CONFIG_EOL_IS_CR is not set +# CONFIG_EOL_IS_LF is not set +# CONFIG_EOL_IS_BOTH_CRLF is not set +CONFIG_EOL_IS_EITHER_CRLF=y +# CONFIG_LIBC_EXECFUNCS is not set +CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=1024 +CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=2048 +# CONFIG_LIBC_STRERROR is not set +# CONFIG_LIBC_PERROR_STDOUT is not set +CONFIG_ARCH_LOWPUTC=y +# CONFIG_LIBC_LOCALTIME is not set +# CONFIG_TIME_EXTENDED is not set +CONFIG_LIB_SENDFILE_BUFSIZE=512 +# CONFIG_ARCH_ROMGETC is not set +# CONFIG_ARCH_OPTIMIZED_FUNCTIONS is not set +# CONFIG_LIBC_NETDB is not set + +# +# Non-standard Library Support +# +# CONFIG_LIB_USRWORK is not set +# CONFIG_LIB_KBDCODEC is not set +# CONFIG_LIB_SLCDCODEC is not set + +# +# Basic CXX Support +# +# CONFIG_C99_BOOL8 is not set +CONFIG_HAVE_CXX=y +CONFIG_HAVE_CXXINITIALIZE=y +# CONFIG_CXX_NEWLONG is not set + +# +# uClibc++ Standard C++ Library +# +# CONFIG_UCLIBCXX is not set + +# +# Application Configuration +# + +# +# Built-In Applications +# + +# +# Examples +# +# CONFIG_EXAMPLES_BUTTONS is not set +# CONFIG_EXAMPLES_CAN is not set +# CONFIG_EXAMPLES_CONFIGDATA is not set +# CONFIG_EXAMPLES_CPUHOG is not set +# CONFIG_EXAMPLES_CXXTEST is not set +# CONFIG_EXAMPLES_DHCPD is not set +# CONFIG_EXAMPLES_ELF is not set +# CONFIG_EXAMPLES_FTPC is not set +# CONFIG_EXAMPLES_FTPD is not set +# CONFIG_EXAMPLES_HELLO is not set +# CONFIG_EXAMPLES_HELLOXX is not set +# CONFIG_EXAMPLES_JSON is not set +# CONFIG_EXAMPLES_KEYPADTEST is not set +# CONFIG_EXAMPLES_IGMP is not set +# CONFIG_EXAMPLES_MM is not set +# CONFIG_EXAMPLES_MODBUS is not set +# CONFIG_EXAMPLES_MOUNT is not set +# CONFIG_EXAMPLES_NRF24L01TERM is not set +CONFIG_EXAMPLES_NSH=y +CONFIG_EXAMPLES_NSH_CXXINITIALIZE=y +# CONFIG_EXAMPLES_NULL is not set +# CONFIG_EXAMPLES_NX is not set +# CONFIG_EXAMPLES_NXTERM is not set +# CONFIG_EXAMPLES_NXFFS is not set +# CONFIG_EXAMPLES_NXHELLO is not set +# CONFIG_EXAMPLES_NXIMAGE is not set +# CONFIG_EXAMPLES_NXLINES is not set +# CONFIG_EXAMPLES_NXTEXT is not set +# CONFIG_EXAMPLES_OSTEST is not set +# CONFIG_EXAMPLES_PIPE is not set +# CONFIG_EXAMPLES_POLL is not set +# CONFIG_EXAMPLES_PPPD is not set +# CONFIG_EXAMPLES_POSIXSPAWN is not set +# CONFIG_EXAMPLES_QENCODER is not set +# CONFIG_EXAMPLES_RGMP is not set +# CONFIG_EXAMPLES_SENDMAIL is not set +# CONFIG_EXAMPLES_SERIALBLASTER is not set +# CONFIG_EXAMPLES_SERIALRX is not set +# CONFIG_EXAMPLES_SERLOOP is not set +# CONFIG_EXAMPLES_SLCD is not set +# CONFIG_EXAMPLES_SMART is not set +# CONFIG_EXAMPLES_TCPECHO is not set +# CONFIG_EXAMPLES_TELNETD is not set +# CONFIG_EXAMPLES_TIFF is not set +# CONFIG_EXAMPLES_TOUCHSCREEN is not set +# CONFIG_EXAMPLES_WEBSERVER is not set +# CONFIG_EXAMPLES_USBSERIAL is not set +# CONFIG_EXAMPLES_USBTERM is not set +# CONFIG_EXAMPLES_WATCHDOG is not set + +# +# Graphics Support +# +# CONFIG_TIFF is not set +# CONFIG_GRAPHICS_TRAVELER is not set + +# +# Interpreters +# +# CONFIG_INTERPRETERS_FICL is not set +# CONFIG_INTERPRETERS_PCODE is not set +# CONFIG_INTERPRETERS_MICROPYTHON is not set + +# +# Network Utilities +# + +# +# Networking Utilities +# +# CONFIG_NETUTILS_CODECS is not set +# CONFIG_NETUTILS_FTPC is not set +# CONFIG_NETUTILS_JSON is not set +# CONFIG_NETUTILS_SMTP is not set + +# +# FreeModBus +# +# CONFIG_MODBUS is not set + +# +# NSH Library +# +CONFIG_NSH_LIBRARY=y + +# +# Command Line Configuration +# +CONFIG_NSH_READLINE=y +# CONFIG_NSH_CLE is not set +CONFIG_NSH_LINELEN=64 +# CONFIG_NSH_DISABLE_SEMICOLON is not set +CONFIG_NSH_CMDPARMS=y +CONFIG_NSH_MAXARGUMENTS=6 +CONFIG_NSH_ARGCAT=y +CONFIG_NSH_NESTDEPTH=3 +# CONFIG_NSH_DISABLEBG is not set + +# +# Disable Individual commands +# +# CONFIG_NSH_DISABLE_ADDROUTE is not set +# CONFIG_NSH_DISABLE_CAT is not set +# CONFIG_NSH_DISABLE_CD is not set +# CONFIG_NSH_DISABLE_CP is not set +# CONFIG_NSH_DISABLE_CMP is not set +CONFIG_NSH_DISABLE_DATE=y +# CONFIG_NSH_DISABLE_DD is not set +# CONFIG_NSH_DISABLE_DF is not set +# CONFIG_NSH_DISABLE_DELROUTE is not set +# CONFIG_NSH_DISABLE_ECHO is not set +# CONFIG_NSH_DISABLE_EXEC is not set +# CONFIG_NSH_DISABLE_EXIT is not set +# CONFIG_NSH_DISABLE_FREE is not set +# CONFIG_NSH_DISABLE_GET is not set +# CONFIG_NSH_DISABLE_HELP is not set +# CONFIG_NSH_DISABLE_HEXDUMP is not set +# CONFIG_NSH_DISABLE_IFCONFIG is not set +# CONFIG_NSH_DISABLE_KILL is not set +# CONFIG_NSH_DISABLE_LOSETUP is not set +# CONFIG_NSH_DISABLE_LS is not set +# CONFIG_NSH_DISABLE_MB is not set +# CONFIG_NSH_DISABLE_MKDIR is not set +# CONFIG_NSH_DISABLE_MKFIFO is not set +# CONFIG_NSH_DISABLE_MKRD is not set +# CONFIG_NSH_DISABLE_MH is not set +# CONFIG_NSH_DISABLE_MOUNT is not set +# CONFIG_NSH_DISABLE_MV is not set +# CONFIG_NSH_DISABLE_MW is not set +# CONFIG_NSH_DISABLE_PUT is not set +# CONFIG_NSH_DISABLE_PWD is not set +# CONFIG_NSH_DISABLE_RM is not set +# CONFIG_NSH_DISABLE_RMDIR is not set +# CONFIG_NSH_DISABLE_SET is not set +# CONFIG_NSH_DISABLE_SH is not set +# CONFIG_NSH_DISABLE_SLEEP is not set +# CONFIG_NSH_DISABLE_TEST is not set +# CONFIG_NSH_DISABLE_UMOUNT is not set +# CONFIG_NSH_DISABLE_UNAME is not set +# CONFIG_NSH_DISABLE_UNSET is not set +# CONFIG_NSH_DISABLE_USLEEP is not set +# CONFIG_NSH_DISABLE_WGET is not set +# CONFIG_NSH_DISABLE_XD is not set + +# +# Configure Command Options +# +CONFIG_NSH_CMDOPT_DF_H=y +CONFIG_NSH_CODECS_BUFSIZE=128 +CONFIG_NSH_CMDOPT_HEXDUMP=y +CONFIG_NSH_FILEIOSIZE=512 + +# +# Scripting Support +# +# CONFIG_NSH_DISABLESCRIPT is not set +# CONFIG_NSH_DISABLE_ITEF is not set +# CONFIG_NSH_DISABLE_LOOPS is not set + +# +# Console Configuration +# +CONFIG_NSH_CONSOLE=y +# CONFIG_NSH_ALTCONDEV is not set +# CONFIG_NSH_ARCHINIT is not set + +# +# NxWidgets/NxWM +# + +# +# Platform-specific Support +# +# CONFIG_PLATFORM_CONFIGDATA is not set + +# +# System Libraries and NSH Add-Ons +# +# CONFIG_SYSTEM_FREE is not set +# CONFIG_SYSTEM_CLE is not set +# CONFIG_SYSTEM_CUTERM is not set +# CONFIG_SYSTEM_INSTALL is not set +# CONFIG_SYSTEM_HEX2BIN is not set +# CONFIG_SYSTEM_INIFILE is not set +# CONFIG_SYSTEM_RAMTEST is not set +CONFIG_SYSTEM_READLINE=y +CONFIG_READLINE_ECHO=y +# CONFIG_SYSTEM_RAMTRON is not set +# CONFIG_SYSTEM_SDCARD is not set +# CONFIG_SYSTEM_SUDOKU is not set +# CONFIG_SYSTEM_VI is not set +# CONFIG_SYSTEM_ZMODEM is not set + diff --git a/configs/stm32f746g-disco/knsh/setenv.sh b/configs/stm32f746g-disco/knsh/setenv.sh new file mode 100644 index 00000000000..ad4ac46b789 --- /dev/null +++ b/configs/stm32f746g-disco/knsh/setenv.sh @@ -0,0 +1,77 @@ +#!/bin/bash +# configs/stm32f746g-disco/knsh/setenv.sh +# +# Copyright (C) 2015 Gregory Nutt. All rights reserved. +# Author: Gregory Nutt +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# +# 1. Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# 2. Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in +# the documentation and/or other materials provided with the +# distribution. +# 3. Neither the name NuttX nor the names of its contributors may be +# used to endorse or promote products derived from this software +# without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS +# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED +# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN +# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +# POSSIBILITY OF SUCH DAMAGE. +# + +if [ "$_" = "$0" ] ; then + echo "You must source this script, not run it!" 1>&2 + exit 1 +fi + +WD=`pwd` +if [ ! -x "setenv.sh" ]; then + echo "This script must be executed from the top-level NuttX build directory" + exit 1 +fi + +if [ -z "${PATH_ORIG}" ]; then + export PATH_ORIG="${PATH}" +fi + +# This is the Cygwin path to the location where I installed the Atmel GCC +# toolchain under Windows. You will also have to edit this if you install +# this toolchain in any other location +#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/Atmel/Atmel Toolchain/ARM GCC/Native/4.7.3.99/arm-gnu-toolchain/bin" + +# This is the Cygwin path to the location where I installed the CodeSourcery +# toolchain under windows. You will also have to edit this if you install +# the CodeSourcery toolchain in any other location +#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin" +#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery_CodeBench_Lite_for_ARM_EABI/bin" +# export TOOLCHAIN_BIN="/cygdrive/c/Users/MyName/MentorGraphics/Sourcery_CodeBench_Lite_for_ARM_EABI/bin" + +# This is the location where I installed the ARM "GNU Tools for ARM Embedded Processors" +# You can this free toolchain here https://launchpad.net/gcc-arm-embedded +export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/GNU Tools ARM Embedded/4.9 2014q4/bin" + +# This is the path to the location where I installed the devkitARM toolchain +# You can get this free toolchain from http://devkitpro.org/ or http://sourceforge.net/projects/devkitpro/ +#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/devkitARM/bin" + +# This is the Cygwin path to the location where I build the buildroot +# toolchain. +# export TOOLCHAIN_BIN="${WD}/../buildroot/build_arm_nofpu/staging_dir/bin" + +# Add the path to the toolchain to the PATH varialble +export PATH="${TOOLCHAIN_BIN}:/sbin:/usr/sbin:${PATH_ORIG}" + +echo "PATH : ${PATH}" diff --git a/configs/stm32f746g-disco/scripts/flash.ld b/configs/stm32f746g-disco/scripts/flash.ld index df49933d9fa..eeae4e2768a 100644 --- a/configs/stm32f746g-disco/scripts/flash.ld +++ b/configs/stm32f746g-disco/scripts/flash.ld @@ -58,14 +58,13 @@ * The STM32F746NGH6 also has 320Kb of data SRAM (in addition to ITCM SRAM). * SRAM is split up into three blocks: * - * 1) 64Kb of DTCM SRM begining at address 0x2000:0000 + * 1) 64Kb of DTCM SRM beginning at address 0x2000:0000 * 2) 240Kb of SRAM1 beginning at address 0x2001:0000 * 3) 16Kb of SRAM2 beginning at address 0x2004:c000 * * When booting from FLASH, FLASH memory is aliased to address 0x0000:0000 * where the code expects to begin execution by jumping to the entry point in - * the 0x0800:0000 address - * range. + * the 0x0800:0000 address range. */ MEMORY diff --git a/configs/stm32f746g-disco/scripts/kernel-space.ld b/configs/stm32f746g-disco/scripts/kernel-space.ld new file mode 100755 index 00000000000..c9f48d5c4ba --- /dev/null +++ b/configs/stm32f746g-disco/scripts/kernel-space.ld @@ -0,0 +1,109 @@ +/**************************************************************************** + * configs/stm32f746g-disco/scripts/kernel-space.ld + * + * Copyright (C) 2015 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/* NOTE: This depends on the memory.ld script having been included prior to + * this script. + */ + +OUTPUT_ARCH(arm) +ENTRY(_stext) +SECTIONS +{ + .text : { + _stext = ABSOLUTE(.); + *(.vectors) + *(.text .text.*) + *(.fixup) + *(.gnu.warning) + *(.rodata .rodata.*) + *(.gnu.linkonce.t.*) + *(.glue_7) + *(.glue_7t) + *(.got) + *(.gcc_except_table) + *(.gnu.linkonce.r.*) + _etext = ABSOLUTE(.); + } > kflash + + .init_section : { + _sinit = ABSOLUTE(.); + *(.init_array .init_array.*) + _einit = ABSOLUTE(.); + } > kflash + + .ARM.extab : { + *(.ARM.extab*) + } > kflash + + __exidx_start = ABSOLUTE(.); + .ARM.exidx : { + *(.ARM.exidx*) + } > kflash + + __exidx_end = ABSOLUTE(.); + + _eronly = ABSOLUTE(.); + + .data : { + _sdata = ABSOLUTE(.); + *(.data .data.*) + *(.gnu.linkonce.d.*) + CONSTRUCTORS + _edata = ABSOLUTE(.); + } > ksram AT > kflash + + .bss : { + _sbss = ABSOLUTE(.); + *(.bss .bss.*) + *(.gnu.linkonce.b.*) + *(COMMON) + _ebss = ABSOLUTE(.); + } > ksram + + /* Stabs debugging sections */ + + .stab 0 : { *(.stab) } + .stabstr 0 : { *(.stabstr) } + .stab.excl 0 : { *(.stab.excl) } + .stab.exclstr 0 : { *(.stab.exclstr) } + .stab.index 0 : { *(.stab.index) } + .stab.indexstr 0 : { *(.stab.indexstr) } + .comment 0 : { *(.comment) } + .debug_abbrev 0 : { *(.debug_abbrev) } + .debug_info 0 : { *(.debug_info) } + .debug_line 0 : { *(.debug_line) } + .debug_pubnames 0 : { *(.debug_pubnames) } + .debug_aranges 0 : { *(.debug_aranges) } +} diff --git a/configs/stm32f746g-disco/scripts/memory.ld b/configs/stm32f746g-disco/scripts/memory.ld new file mode 100644 index 00000000000..bc9379ac056 --- /dev/null +++ b/configs/stm32f746g-disco/scripts/memory.ld @@ -0,0 +1,129 @@ +/**************************************************************************** + * configs/stm32f746g-disco/scripts/memory.ld + * + * Copyright (C) 2013 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/* The STM32F746NGH6 has 1024Kb of main FLASH memory. This FLASH memory can + * be accessed from either the AXIM interface at address 0x0800:0000 or from + * the ITCM interface at address 0x0020:0000. + * + * Additional information, including the option bytes, is available at at + * FLASH at address 0x1ff0:0000 (AXIM) or 0x0010:0000 (ITCM). + * + * In the STM32F746NGH6, two different boot spaces can be selected through + * the BOOT pin and the boot base address programmed in the BOOT_ADD0 and + * BOOT_ADD1 option bytes: + * + * 1) BOOT=0: Boot address defined by user option byte BOOT_ADD0[15:0]. + * ST programmed value: Flash on ITCM at 0x0020:0000 + * 2) BOOT=1: Boot address defined by user option byte BOOT_ADD1[15:0]. + * ST programmed value: System bootloader at 0x0010:0000 + * + * NuttX does not modify these option byes. On the unmodified STM32F746G + * DISCO board, the BOOT0 pin is at ground so by default, the STM32 will boot + * to address 0x0020:0000 in ITCM FLASH. + * + * The STM32F746NGH6 also has 320Kb of data SRAM (in addition to ITCM SRAM). + * SRAM is split up into three blocks: + * + * 1) 64Kb of DTCM SRM beginning at address 0x2000:0000 + * 2) 240Kb of SRAM1 beginning at address 0x2001:0000 + * 3) 16Kb of SRAM2 beginning at address 0x2004:c000 + * + * When booting from FLASH, FLASH memory is aliased to address 0x0000:0000 + * where the code expects to begin execution by jumping to the entry point in + * the 0x0800:0000 address range. + * + * For MPU support, the kernel-mode NuttX section is assumed to be 128Kb of + * FLASH and 4Kb of SRAM. That is an excessive amount for the kernel which + * should fit into 64KB and, of course, can be optimized as needed (See + * also configs/stm32f746g-disco/scripts/kernel-space.ld). Allowing the + * additional does permit addition debug instrumentation to be added to the + * kernel space without overflowing the partition. + * + * Alignment of the user space FLASH partition is also a critical factor: + * The user space FLASH partition will be spanned with a single region of + * size 2**n bytes. The alignment of the user-space region must be the same. + * As a consequence, as the user-space increases in size, the alignment + * requirement also increases. + * + * This alignment requirement means that the largest user space FLASH region + * you can have will be 512KB at it would have to be positioned at + * 0x08800000. If you change this address, don't forget to change the + * CONFIG_NUTTX_USERSPACE configuration setting to match and to modify + * the check in kernel/userspace.c. + * + * For the same reasons, the maximum size of the SRAM mapping is limited to + * 4KB. Both of these alignment limitations could be reduced by using + * multiple regions to map the FLASH/SDRAM range or perhaps with some + * clever use of subregions. + * + * A detailed memory map for the 112KB SRAM region is as follows: + * + * 0x20001 0000: Kernel .data region. Typical size: 0.1KB + * ------- ---- Kernel .bss region. Typical size: 1.8KB + * 0x20001 0800: Kernel IDLE thread stack (approximate). Size is + * determined by CONFIG_IDLETHREAD_STACKSIZE and + * adjustments for alignment. Typical is 1KB. + * ------- ---- Padded to 4KB + * 0x20001 1000: User .data region. Size is variable. + * ------- ---- User .bss region Size is variable. + * 0x20001 2000: Beginning of kernel heap. Size determined by + * CONFIG_MM_KERNEL_HEAPSIZE. + * ------- ---- Beginning of user heap. Can vary with other settings. + * 0x20004 c000: End+1 of SRAM1 + */ + +MEMORY +{ + /* ITCM boot address */ + + itcm (rwx) : ORIGIN = 0x00200000, LENGTH = 1024K + + /* 1024KB FLASH */ + + kflash (rx) : ORIGIN = 0x08000000, LENGTH = 128K + uflash (rx) : ORIGIN = 0x08020000, LENGTH = 128K + xflash (rx) : ORIGIN = 0x08040000, LENGTH = 768K + + /* 240KB of contiguous SRAM1 */ + + ksram (rwx) : ORIGIN = 0x20010000, LENGTH = 4K + usram (rwx) : ORIGIN = 0x20011000, LENGTH = 4K + xsram (rwx) : ORIGIN = 0x20012000, LENGTH = 240K - 8K + + /* DTCM SRAM */ + + dtcm (rwx) : ORIGIN = 0x20000000, LENGTH = 64K + sram2 (rwx) : ORIGIN = 0x2004c000, LENGTH = 16K +} diff --git a/configs/stm32f746g-disco/scripts/user-space.ld b/configs/stm32f746g-disco/scripts/user-space.ld new file mode 100644 index 00000000000..3017c266176 --- /dev/null +++ b/configs/stm32f746g-disco/scripts/user-space.ld @@ -0,0 +1,111 @@ +/**************************************************************************** + * configs/stm32f746g-disco/scripts/user-space.ld + * + * Copyright (C) 2015 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/* NOTE: This depends on the memory.ld script having been included prior to + * this script. + */ + +OUTPUT_ARCH(arm) +SECTIONS +{ + .userspace : { + *(.userspace) + } > uflash + + .text : { + _stext = ABSOLUTE(.); + *(.text .text.*) + *(.fixup) + *(.gnu.warning) + *(.rodata .rodata.*) + *(.gnu.linkonce.t.*) + *(.glue_7) + *(.glue_7t) + *(.got) + *(.gcc_except_table) + *(.gnu.linkonce.r.*) + _etext = ABSOLUTE(.); + } > uflash + + .init_section : { + _sinit = ABSOLUTE(.); + *(.init_array .init_array.*) + _einit = ABSOLUTE(.); + } > uflash + + .ARM.extab : { + *(.ARM.extab*) + } > uflash + + __exidx_start = ABSOLUTE(.); + .ARM.exidx : { + *(.ARM.exidx*) + } > uflash + + __exidx_end = ABSOLUTE(.); + + _eronly = ABSOLUTE(.); + + .data : { + _sdata = ABSOLUTE(.); + *(.data .data.*) + *(.gnu.linkonce.d.*) + CONSTRUCTORS + _edata = ABSOLUTE(.); + } > usram AT > uflash + + .bss : { + _sbss = ABSOLUTE(.); + *(.bss .bss.*) + *(.gnu.linkonce.b.*) + *(COMMON) + _ebss = ABSOLUTE(.); + } > usram + + /* Stabs debugging sections */ + + .stab 0 : { *(.stab) } + .stabstr 0 : { *(.stabstr) } + .stab.excl 0 : { *(.stab.excl) } + .stab.exclstr 0 : { *(.stab.exclstr) } + .stab.index 0 : { *(.stab.index) } + .stab.indexstr 0 : { *(.stab.indexstr) } + .comment 0 : { *(.comment) } + .debug_abbrev 0 : { *(.debug_abbrev) } + .debug_info 0 : { *(.debug_info) } + .debug_line 0 : { *(.debug_line) } + .debug_pubnames 0 : { *(.debug_pubnames) } + .debug_aranges 0 : { *(.debug_aranges) } +} diff --git a/configs/stm32f746g-disco/src/Makefile b/configs/stm32f746g-disco/src/Makefile index 3abc0ab05a8..25a395d886e 100644 --- a/configs/stm32f746g-disco/src/Makefile +++ b/configs/stm32f746g-disco/src/Makefile @@ -42,10 +42,6 @@ AOBJS = $(ASRCS:.S=$(OBJEXT)) CSRCS = stm32_boot.c stm32_spi.c -ifeq ($(CONFIG_HAVE_CXX),y) -CSRCS += stm32_cxxinitialize.c -endif - ifeq ($(CONFIG_ARCH_LEDS),y) CSRCS += stm32_autoleds.c else diff --git a/configs/stm32f746g-disco/src/stm32_cxxinitialize.c b/configs/stm32f746g-disco/src/stm32_cxxinitialize.c deleted file mode 100644 index bd84d9eb600..00000000000 --- a/configs/stm32f746g-disco/src/stm32_cxxinitialize.c +++ /dev/null @@ -1,154 +0,0 @@ -/************************************************************************************ - * configs/stm32f746g-disco/src/stm32_cxxinitialize.c - * - * Copyright (C) 2015 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name NuttX nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ************************************************************************************/ - -/************************************************************************************ - * Included Files - ************************************************************************************/ - -#include - -#include - -#include - -#include -#include "chip.h" - -#if defined(CONFIG_HAVE_CXX) && defined(CONFIG_HAVE_CXXINITIALIZE) - -/************************************************************************************ - * Pre-processor Definitions - ************************************************************************************/ -/* Debug ****************************************************************************/ -/* Non-standard debug that may be enabled just for testing the static constructors */ - -#ifndef CONFIG_DEBUG -# undef CONFIG_DEBUG_CXX -#endif - -#ifdef CONFIG_DEBUG_CXX -# define cxxdbg dbg -# define cxxlldbg lldbg -# ifdef CONFIG_DEBUG_VERBOSE -# define cxxvdbg vdbg -# define cxxllvdbg llvdbg -# else -# define cxxvdbg(x...) -# define cxxllvdbg(x...) -# endif -#else -# define cxxdbg(x...) -# define cxxlldbg(x...) -# define cxxvdbg(x...) -# define cxxllvdbg(x...) -#endif - -/************************************************************************************ - * Private Types - ************************************************************************************/ -/* This type defines one entry in initialization array */ - -typedef void (*initializer_t)(void); - -/************************************************************************************ - * External references - ************************************************************************************/ -/* _sinit and _einit are symbols exported by the linker script that mark the - * beginning and the end of the C++ initialization section. - */ - -extern initializer_t _sinit; -extern initializer_t _einit; - -/* _stext and _etext are symbols exported by the linker script that mark the - * beginning and the end of text. - */ - -extern uint32_t _stext; -extern uint32_t _etext; - -/************************************************************************************ - * Private Functions - ************************************************************************************/ - -/************************************************************************************ - * Public Functions - ************************************************************************************/ - -/**************************************************************************** - * Name: up_cxxinitialize - * - * Description: - * If C++ and C++ static constructors are supported, then this function - * must be provided by board-specific logic in order to perform - * initialization of the static C++ class instances. - * - * This function should then be called in the application-specific - * user_start logic in order to perform the C++ initialization. NOTE - * that no component of the core NuttX RTOS logic is involved; This - * function defintion only provides the 'contract' between application - * specific C++ code and platform-specific toolchain support - * - ***************************************************************************/ - -void up_cxxinitialize(void) -{ - initializer_t *initp; - - cxxdbg("_sinit: %p _einit: %p _stext: %p _etext: %p\n", - &_sinit, &_einit, &_stext, &_etext); - - /* Visit each entry in the initialzation table */ - - for (initp = &_sinit; initp != &_einit; initp++) - { - initializer_t initializer = *initp; - cxxdbg("initp: %p initializer: %p\n", initp, initializer); - - /* Make sure that the address is non-NULL and lies in the text region - * defined by the linker script. Some toolchains may put NULL values - * or counts in the initialization table - */ - - if ((void*)initializer > (void*)&_stext && (void*)initializer < (void*)&_etext) - { - cxxdbg("Calling %p\n", initializer); - initializer(); - } - } -} - -#endif /* CONFIG_HAVE_CXX && CONFIG_HAVE_CXXINITIALIZE */ -