diff --git a/configs/stm3210e-eval/include/board.h b/configs/stm3210e-eval/include/board.h
index c753d065055..4792ab6affa 100755
--- a/configs/stm3210e-eval/include/board.h
+++ b/configs/stm3210e-eval/include/board.h
@@ -45,6 +45,7 @@
 # include <sys/types.h>
 #endif
 #include "stm32_rcc.h"
+#include "stm32_sdio.h"
 #include "stm32_internal.h"
 
 /************************************************************************************
@@ -89,6 +90,36 @@
 
 #define STM32_CFGR_USBPRE      0
 
+/* SDIO dividers.  Note that slower clocking is required when DMA is disabled 
+ * in order to avoid RX overrun/TX underrun errors due to delayed responses
+ * to service FIFOs in interrupt driven mode.  These values have not been
+ * tuned!!!
+ *
+ * HCLK=72MHz, SDIOCLK=72MHz, SDIO_CK=HCLK/(178+2)=400 KHz
+ */
+  
+#define SDIO_INIT_CLKDIV       (178 << SDIO_CLKCR_CLKDIV_SHIFT)
+
+/* DMA ON:  HCLK=72 MHz, SDIOCLK=72MHz, SDIO_CK=HCLK/(2+2)=18 MHz
+ * DMA OFF: HCLK=72 MHz, SDIOCLK=72MHz, SDIO_CK=HCLK/(3+2)=14.4 MHz
+ */
+
+#ifdef CONFIG_SDIO_DMA
+#  define SDIO_MMCXFR_CLKDIV   (2 << SDIO_CLKCR_CLKDIV_SHIFT) 
+#else
+#  define SDIO_MMCXFR_CLKDIV   (3 << SDIO_CLKCR_CLKDIV_SHIFT) 
+#endif
+
+/* DMA ON:  HCLK=72 MHz, SDIOCLK=72MHz, SDIO_CK=HCLK/(1+2)=24 MHz
+ * DMA OFF: HCLK=72 MHz, SDIOCLK=72MHz, SDIO_CK=HCLK/(3+2)=14.4 MHz
+ */
+
+#ifdef CONFIG_SDIO_DMA
+#  define SDIO_SDXFR_CLKDIV    (1 << SDIO_CLKCR_CLKDIV_SHIFT)
+#else
+#  define SDIO_SDXFR_CLKDIV    (3 << SDIO_CLKCR_CLKDIV_SHIFT)
+#endif
+
 /* LED definitions ******************************************************************/
 
 /* The STM3210E-EVAL board has 4 LEDs that we will encode as: */