Fix references to the no-longer-existent misc/ directory in comments, README files, and documentation

configs/Kconfig

@@ -1,6 +1,6 @@
 #
 # For a description of the syntax of this configuration file,
-# see misc/tools/kconfig-language.txt.
+# see the file kconfig-language.txt in the NuttX tools repository.
 #
 
 choice
@@ -1053,11 +1053,9 @@ config ARCH_BOARD_Z80SIM
 	depends on ARCH_CHIP_Z80
 	select ARCH_HAVE_UART
 	---help---
-		z80 Microcontroller.  This port uses a Z80 instruction set simulator.
-		That simulator can be found in the NuttX GIT at
-		https://bitbucket.org/patacongo/nuttx/src/master/misc/sims/z80sim.
-		This port also uses the SDCC toolchain (http://sdcc.sourceforge.net/")
-		(verified with version 2.6.0).
+		z80 Microcontroller.  This port uses a Z80 instruction set simulator
+		called z80sim.  This port also uses the SDCC toolchain
+		(http://sdcc.sourceforge.net/") (verified with version 2.6.0).
 
 config ARCH_BOARD_Z8ENCORE000ZCO
 	bool "ZiLOG Z8ENCORE000ZCO Development Kit"

configs/README.txt

@@ -681,11 +681,9 @@ configs/z16f2800100zcog
   development environment is Cygwin under WinXP.
 
 configs/z80sim
-  z80 Microcontroller.  This port uses a Z80 instruction set simulator.
-  That simulator can be found in the NuttX GIT at
-  https://bitbucket.org/patacongo/nuttx/src/master/misc/sims/z80sim.
-  This port also uses the SDCC toolchain (http://sdcc.sourceforge.net/")
-  (verified with version 2.6.0).
+  z80 Microcontroller.  This port uses a Z80 instruction set simulator
+  called z80sim.  This port also uses the SDCC toolchain
+  (http://sdcc.sourceforge.net/") (verified with version 2.6.0).
 
 configs/z8encore000zco
   z8Encore! Microcontroller.  This port use the Zilog z8encore000zco

configs/amber/Kconfig

@@ -1,4 +1,4 @@
 #
 # For a description of the syntax of this configuration file,
-# see misc/tools/kconfig-language.txt.
+# see the file kconfig-language.txt in the NuttX tools repository.
 #

configs/amber/README.txt

@@ -200,7 +200,7 @@ Buildroot:
   following section for details on building this toolchain.
 
   It is assumed in some places that buildroot toolchain is available
-  at ../misc/buildroot/build_avr.  Edit the setenv.sh file if
+  at ../buildroot/build_avr.  Edit the setenv.sh file if
   this is not the case.
 
   After configuring NuttX, make sure that CONFIG_AVR_BUILDROOT=y is set in your
@@ -512,7 +512,7 @@ Common Configuration Notes
      change a configurations using that tool, you should:
 
      a. Build and install the kconfig-mconf tool.  See nuttx/README.txt
-        and misc/tools/
+        see additional README.txt files in the NuttX tools repository.
 
      b. Execute 'make menuconfig' in nuttx/ in order to start the
         reconfiguration process.

configs/amber/hello/setenv.sh

@@ -55,7 +55,7 @@ fi
 
 # This is the Cygwin path to the location where I build the buildroot
 # toolchain.
-export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_avr/staging_dir/bin"
+export TOOLCHAIN_BIN="${WD}/../buildroot/build_avr/staging_dir/bin"
 
 # Add the path to the toolchain to the PATH varialble
 export PATH="${TOOLCHAIN_BIN}:/sbin:/usr/sbin:${PATH_ORIG}"

configs/arduino-due/Kconfig

@@ -1,6 +1,6 @@
 #
 # For a description of the syntax of this configuration file,
-# see misc/tools/kconfig-language.txt.
+# see the file kconfig-language.txt in the NuttX tools repository.
 #
 
 if ARCH_BOARD_ARDUINO_DUE

configs/arduino-due/README.txt

@@ -875,7 +875,7 @@ Configurations
     change any of these configurations using that tool, you should:
 
     a. Build and install the kconfig-mconf tool.  See nuttx/README.txt
-       and misc/tools/
+       see additional README.txt files in the NuttX tools repository.
 
     b. Execute 'make menuconfig' in nuttx/ in order to start the
        reconfiguration process.

configs/arduino-due/nsh/setenv.sh

@@ -67,7 +67,7 @@ fi
 
 # This is the Cygwin path to the location where I build the buildroot
 # toolchain.
-export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin"
+export TOOLCHAIN_BIN="${WD}/../buildroot/build_arm_nofpu/staging_dir/bin"
 
 # This is the Cygwin path to the location where I have the Arduino BOSSA program
 export BOSSA_BIN="/cygdrive/c/Program Files (x86)/Arduino/arduino-1.5.2/hardware/tools"

configs/avr32dev1/Kconfig

@@ -1,6 +1,6 @@
 #
 # For a description of the syntax of this configuration file,
-# see misc/tools/kconfig-language.txt.
+# see the file kconfig-language.txt in the NuttX tools repository.
 #
 
 if ARCH_BOARD_AVR32DEV1

configs/avr32dev1/README.txt

@@ -447,7 +447,7 @@ Common Configuration Notes
      change a configurations using that tool, you should:
 
      a. Build and install the kconfig-mconf tool.  See nuttx/README.txt
-        and misc/tools/
+        see additional README.txt files in the NuttX tools repository.
 
      b. Execute 'make menuconfig' in nuttx/ in order to start the
         reconfiguration process.

configs/c5471evm/Kconfig

@@ -1,6 +1,6 @@
 #
 # For a description of the syntax of this configuration file,
-# see misc/tools/kconfig-language.txt.
+# see the file kconfig-language.txt in the NuttX tools repository.
 #
 
 if ARCH_BOARD_C5471EVM

configs/c5471evm/README.txt

@@ -142,7 +142,7 @@ Common Configuration Notes
      change a configurations using that tool, you should:
 
      a. Build and install the kconfig-mconf tool.  See nuttx/README.txt
-        and misc/tools/
+        see additional README.txt files in the NuttX tools repository.
 
      b. Execute 'make menuconfig' in nuttx/ in order to start the
         reconfiguration process.

configs/c5471evm/httpd/setenv.sh

@@ -65,7 +65,7 @@ fi
 
 # This is the Cygwin path to the location where I build the buildroot
 # toolchain.
-export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin"
+export TOOLCHAIN_BIN="${WD}/../buildroot/build_arm_nofpu/staging_dir/bin"
 
 # Add the path to the toolchain to the PATH varialble
 export PATH="${TOOLCHAIN_BIN}:/sbin:/usr/sbin:${PATH_ORIG}"

configs/c5471evm/nettest/setenv.sh

@@ -65,7 +65,7 @@ fi
 
 # This is the Cygwin path to the location where I build the buildroot
 # toolchain.
-export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin"
+export TOOLCHAIN_BIN="${WD}/../buildroot/build_arm_nofpu/staging_dir/bin"
 
 # Add the path to the toolchain to the PATH varialble
 export PATH="${TOOLCHAIN_BIN}:/sbin:/usr/sbin:${PATH_ORIG}"

configs/c5471evm/nsh/setenv.sh

@@ -65,7 +65,7 @@ fi
 
 # This is the Cygwin path to the location where I build the buildroot
 # toolchain.
-export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin"
+export TOOLCHAIN_BIN="${WD}/../buildroot/build_arm_nofpu/staging_dir/bin"
 
 # Add the path to the toolchain to the PATH varialble
 export PATH="${TOOLCHAIN_BIN}:/sbin:/usr/sbin:${PATH_ORIG}"

configs/cc3200-launchpad/Kconfig

@@ -1,6 +1,6 @@
 #
 # For a description of the syntax of this configuration file,
-# see misc/tools/kconfig-language.txt.
+# see the file kconfig-language.txt in the NuttX tools repository.
 #
 
 if ARCH_BOARD_CC3200_LAUNCHPAD

configs/cc3200-launchpad/nsh/setenv.sh

@@ -64,7 +64,7 @@ fi
 
 # This is the Cygwin path to the location where I build the buildroot
 # toolchain.
-export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin"
+export TOOLCHAIN_BIN="${WD}/../buildroot/build_arm_nofpu/staging_dir/bin"
 
 # The cc3200-launchpad/tools directory
 export TOOL_DIR="${WD}/configs/cc3200-launchpad/tools"

configs/cloudctrl/Kconfig

@@ -1,6 +1,6 @@
 #
 # For a description of the syntax of this configuration file,
-# see misc/tools/kconfig-language.txt.
+# see the file kconfig-language.txt in the NuttX tools repository.
 #
 
 if ARCH_BOARD_CLOUDCTRL

configs/cloudctrl/README.txt

@@ -352,8 +352,8 @@ NuttX EABI buildroot Toolchain
      -export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin"
      +#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin"
 
-     -#export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin"
-     +export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin"
+     -#export TOOLCHAIN_BIN="${WD}/../buildroot/build_arm_nofpu/staging_dir/bin"
+     +export TOOLCHAIN_BIN="${WD}/../buildroot/build_arm_nofpu/staging_dir/bin"
 
   See the file configs/README.txt in the buildroot source tree.  That has more
   detailed PLUS some special instructions that you will need to follow if you are

configs/cloudctrl/nsh/setenv.sh

@@ -67,7 +67,7 @@ export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++
 
 # This is the Cygwin path to the location where I build the buildroot
 # toolchain.
-#export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin"
+#export TOOLCHAIN_BIN="${WD}/../buildroot/build_arm_nofpu/staging_dir/bin"
 
 # This is the path to the tools/ subdirectory
 export TOOLS_DIR="${WD}/configs/shenzhou/tools"

configs/compal_e86/Kconfig

@@ -1,4 +1,4 @@
 #
 # For a description of the syntax of this configuration file,
-# see misc/tools/kconfig-language.txt.
+# see the file kconfig-language.txt in the NuttX tools repository.
 #

configs/compal_e86/nsh_highram/setenv.sh

@@ -66,7 +66,7 @@ fi
 
 # This is the Cygwin path to the location where I build the buildroot
 # toolchain.
-export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin"
+export TOOLCHAIN_BIN="${WD}/../buildroot/build_arm_nofpu/staging_dir/bin"
 
 # Add the path to the toolchain to the PATH varialble
 export PATH="${TOOLCHAIN_BIN}:/sbin:/usr/sbin:${PATH_ORIG}"

configs/compal_e88/Kconfig

@@ -1,4 +1,4 @@
 #
 # For a description of the syntax of this configuration file,
-# see misc/tools/kconfig-language.txt.
+# see the file kconfig-language.txt in the NuttX tools repository.
 #

configs/compal_e88/nsh_highram/setenv.sh

@@ -40,7 +40,7 @@ fi
 if [ -z ${PATH_ORIG} ]; then export PATH_ORIG=${PATH}; fi
 
 WD=`pwd`
-export BUILDROOT_BIN=${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin
+export BUILDROOT_BIN=${WD}/../buildroot/build_arm_nofpu/staging_dir/bin
 export PATH=${BUILDROOT_BIN}:/sbin:/usr/sbin:${PATH_ORIG}
 
 echo "PATH : ${PATH}"

configs/compal_e99/Kconfig

@@ -1,6 +1,6 @@
 #
 # For a description of the syntax of this configuration file,
-# see misc/tools/kconfig-language.txt.
+# see the file kconfig-language.txt in the NuttX tools repository.
 #
 
 if ARCH_BOARD_COMPALE99

configs/compal_e99/README.txt

@@ -68,7 +68,7 @@ Configurations
      change a configurations using that tool, you should:
 
      a. Build and install the kconfig-mconf tool.  See nuttx/README.txt
-        and misc/tools/
+        see additional README.txt files in the NuttX tools repository.
 
      b. Execute 'make menuconfig' in nuttx/ in order to start the
         reconfiguration process.

configs/compal_e99/nsh_compalram/setenv.sh

@@ -55,7 +55,7 @@ fi
 
 # This is the Cygwin path to the location where I build the buildroot
 # toolchain.
-export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin"
+export TOOLCHAIN_BIN="${WD}/../buildroot/build_arm_nofpu/staging_dir/bin"
 
 # Add the path to the toolchain to the PATH varialble
 export PATH="${TOOLCHAIN_BIN}:/sbin:/usr/sbin:${PATH_ORIG}"

configs/compal_e99/nsh_highram/setenv.sh

@@ -55,7 +55,7 @@ fi
 
 # This is the Cygwin path to the location where I build the buildroot
 # toolchain.
-export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin"
+export TOOLCHAIN_BIN="${WD}/../buildroot/build_arm_nofpu/staging_dir/bin"
 
 # Add the path to the toolchain to the PATH varialble
 export PATH="${TOOLCHAIN_BIN}:/sbin:/usr/sbin:${PATH_ORIG}"

configs/demo9s12ne64/Kconfig

@@ -1,6 +1,6 @@
 #
 # For a description of the syntax of this configuration file,
-# see misc/tools/kconfig-language.txt.
+# see the file kconfig-language.txt in the NuttX tools repository.
 #
 
 if ARCH_BOARD_DEMOS92S12NEC64

configs/demo9s12ne64/README.txt

@@ -376,7 +376,7 @@ Common Configuration Notes
      change a configurations using that tool, you should:
 
      a. Build and install the kconfig-mconf tool.  See nuttx/README.txt
-        and misc/tools/
+        see additional README.txt files in the NuttX tools repository.
 
      b. Execute 'make menuconfig' in nuttx/ in order to start the
         reconfiguration process.

configs/demo9s12ne64/ostest/setenv.sh

@@ -40,7 +40,7 @@ fi
 if [ -z "${PATH_ORIG}" ]; then export PATH_ORIG="${PATH}"; fi
 
 WD=`pwd`
-export BUILDROOT_BIN="${WD}/../misc/buildroot/build_m9s12x/staging_dir/bin"
+export BUILDROOT_BIN="${WD}/../buildroot/build_m9s12x/staging_dir/bin"
 export PATH="${BUILDROOT_BIN}:${RIDE_BIN}:/sbin:/usr/sbin:${PATH_ORIG}"
 
 echo "PATH : ${PATH}"

configs/dk-tm4c129x/Kconfig

@@ -1,6 +1,6 @@
 #
 # For a description of the syntax of this configuration file,
-# see misc/tools/kconfig-language.txt.
+# see the file kconfig-language.txt in the NuttX tools repository.
 #
 
 if ARCH_BOARD_DK_TM4C129X

configs/dk-tm4c129x/README.txt

@@ -679,7 +679,7 @@ Where <subdir> is one of the following:
        change this configuration using that tool, you should:
 
        a. Build and install the kconfig-mconf tool.  See nuttx/README.txt
-          and misc/tools/
+          see additional README.txt files in the NuttX tools repository.
 
        b. Execute 'make menuconfig' in nuttx/ in order to start the
           reconfiguration process.

configs/dk-tm4c129x/ipv6/setenv.sh

@@ -64,7 +64,7 @@ export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery_Code
 
 # This is the Cygwin path to the location where I build the buildroot
 # toolchain.
-# export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin"
+# export TOOLCHAIN_BIN="${WD}/../buildroot/build_arm_nofpu/staging_dir/bin"
 
 # The dk-tm4c129x/tools directory
 export TOOL_DIR="${WD}/configs/dk-tm4c129x/tools"

configs/dk-tm4c129x/nsh/setenv.sh

@@ -64,7 +64,7 @@ export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery_Code
 
 # This is the Cygwin path to the location where I build the buildroot
 # toolchain.
-# export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin"
+# export TOOLCHAIN_BIN="${WD}/../buildroot/build_arm_nofpu/staging_dir/bin"
 
 # The dk-tm4c129x/tools directory
 export TOOL_DIR="${WD}/configs/dk-tm4c129x/tools"

configs/ea3131/Kconfig

@@ -1,6 +1,6 @@
 #
 # For a description of the syntax of this configuration file,
-# see misc/tools/kconfig-language.txt.
+# see the file kconfig-language.txt in the NuttX tools repository.
 #
 
 if ARCH_BOARD_EA3131

configs/ea3131/README.txt

@@ -618,7 +618,7 @@ Common Configuration Notes
      change a configurations using that tool, you should:
 
      a. Build and install the kconfig-mconf tool.  See nuttx/README.txt
-        and misc/tools/
+        see additional README.txt files in the NuttX tools repository.
 
      b. Execute 'make menuconfig' in nuttx/ in order to start the
         reconfiguration process.

configs/ea3131/nsh/setenv.sh

@@ -54,7 +54,7 @@ export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++
 
 # This is the Cygwin path to the location where I build the buildroot
 # toolchain.
-#export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin"
+#export TOOLCHAIN_BIN="${WD}/../buildroot/build_arm_nofpu/staging_dir/bin"
 
 # This is the path to the tools subdirectory
 

configs/ea3131/pgnsh/setenv.sh

@@ -54,7 +54,7 @@ export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++
 
 # This is the Cygwin path to the location where I build the buildroot
 # toolchain.
-#export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin"
+#export TOOLCHAIN_BIN="${WD}/../buildroot/build_arm_nofpu/staging_dir/bin"
 
 # This is the path to the tools subdirectory
 

configs/ea3131/usbserial/setenv.sh

@@ -54,7 +54,7 @@ export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++
 
 # This is the Cygwin path to the location where I build the buildroot
 # toolchain.
-#export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin"
+#export TOOLCHAIN_BIN="${WD}/../buildroot/build_arm_nofpu/staging_dir/bin"
 
 # This is the path to the tools subdirectory
 

configs/ea3152/Kconfig

@@ -1,6 +1,6 @@
 #
 # For a description of the syntax of this configuration file,
-# see misc/tools/kconfig-language.txt.
+# see the file kconfig-language.txt in the NuttX tools repository.
 #
 
 if ARCH_BOARD_EA3152

configs/ea3152/ostest/setenv.sh

@@ -54,7 +54,7 @@ export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++
 
 # This is the Cygwin path to the location where I build the buildroot
 # toolchain.
-#export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin"
+#export TOOLCHAIN_BIN="${WD}/../buildroot/build_arm_nofpu/staging_dir/bin"
 
 # This is the path to the tools subdirectory
 

configs/eagle100/Kconfig

@@ -1,6 +1,6 @@
 #
 # For a description of the syntax of this configuration file,
-# see misc/tools/kconfig-language.txt.
+# see the file kconfig-language.txt in the NuttX tools repository.
 #
 
 if ARCH_BOARD_EAGLE100

configs/eagle100/README.txt

@@ -360,7 +360,7 @@ Common Configuration Notes
      change a configurations using that tool, you should:
 
      a. Build and install the kconfig-mconf tool.  See nuttx/README.txt
-        and misc/tools/
+        see additional README.txt files in the NuttX tools repository.
 
      b. Execute 'make menuconfig' in nuttx/ in order to start the
         reconfiguration process.

configs/eagle100/httpd/setenv.sh

@@ -68,7 +68,7 @@ export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery_Code
 
 # This is the Cygwin path to the location where I build the buildroot
 # toolchain.
-#export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin"
+#export TOOLCHAIN_BIN="${WD}/../buildroot/build_arm_nofpu/staging_dir/bin"
 
 # Add the path to the toolchain to the PATH varialble
 export PATH="${TOOLCHAIN_BIN}:/sbin:/usr/sbin:${PATH_ORIG}"

configs/eagle100/nettest/setenv.sh

@@ -55,7 +55,7 @@ export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery_Code
 
 # This is the Cygwin path to the location where I build the buildroot
 # toolchain.
-#export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin"
+#export TOOLCHAIN_BIN="${WD}/../buildroot/build_arm_nofpu/staging_dir/bin"
 
 # Add the path to the toolchain to the PATH varialble
 export PATH="${TOOLCHAIN_BIN}:/sbin:/usr/sbin:${PATH_ORIG}"

configs/eagle100/nsh/setenv.sh

@@ -54,7 +54,7 @@ export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++
 
 # This is the Cygwin path to the location where I build the buildroot
 # toolchain.
-#export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin"
+#export TOOLCHAIN_BIN="${WD}/../buildroot/build_arm_nofpu/staging_dir/bin"
 
 # Add the path to the toolchain to the PATH varialble
 export PATH="${TOOLCHAIN_BIN}:/sbin:/usr/sbin:${PATH_ORIG}"

configs/eagle100/nxflat/setenv.sh

@@ -68,7 +68,7 @@ export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery_Code
 
 # This is the Cygwin path to the location where I build the buildroot
 # toolchain.
-#export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin"
+#export TOOLCHAIN_BIN="${WD}/../buildroot/build_arm_nofpu/staging_dir/bin"
 
 # Add the path to the toolchain to the PATH varialble
 export PATH="${TOOLCHAIN_BIN}:/sbin:/usr/sbin:${PATH_ORIG}"

configs/eagle100/thttpd/setenv.sh

@@ -68,7 +68,7 @@ fi
 
 # This is the Cygwin path to the location where I build the buildroot
 # toolchain.
-export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin"
+export TOOLCHAIN_BIN="${WD}/../buildroot/build_arm_nofpu/staging_dir/bin"
 
 # Add the path to the toolchain to the PATH varialble
 export PATH="${TOOLCHAIN_BIN}:/sbin:/usr/sbin:${PATH_ORIG}"

configs/efm32-g8xx-stk/Kconfig

@@ -1,6 +1,6 @@
 #
 # For a description of the syntax of this configuration file,
-# see misc/tools/kconfig-language.txt.
+# see the file kconfig-language.txt in the NuttX tools repository.
 #
 
 if ARCH_BOARD_EFM32G8XXSTK