configs/olimex-strp711/nsh: Configuration converted to use the kconfig-frontends tools

configs/olimex-strp711/README.txt

@@ -372,18 +372,22 @@ ENC28J60 Module
   the ENC28J60 (And I don't have the correct wall wart to power the
   the board).
 
-Configurations:
+Common Configuration Notes:
----------------
+---------------------------
 
-  nettest:
+  1. Each Olimex STRP711 configuration is maintained in a sub-directory and
-    This configuration directory may be used to enable networking using the
+     can be selected as follow:
-    an Microchip ENC28J60 SPI Ethernet module (see above for connection to
-    STR-P711).
 
-    NOTES:
+       cd tools
+       ./configure.sh olimex-strp711/<subdir>
+       cd -
+       . ./setenv.sh
 
-    1. This configuration uses the mconf-based configuration tool.  To
+     Where <subdir> is one of the configuration sub-directories described in
-       change this configurations using that tool, you should:
+     the following paragraph.
+
+  2. These configurations use the mconf-based configuration tool.  To
+     change a configurations using that tool, you should:
 
      a. Build and install the kconfig-mconf tool.  See nuttx/README.txt
         and misc/tools/
@@ -391,6 +395,21 @@ Configurations:
      b. Execute 'make menuconfig' in nuttx/ in order to start the
         reconfiguration process.
 
+  3. By default, all configurations assume the NuttX Buildroot toolchain
+     under Linux (should work under Windows with Cygwin as well).  This
+     is easily reconfigured:
+
+        CONFIG_HOST_LINUX=y
+        CONFIG_ARM_TOOLCHAIN_BUILDROOT=y
+
+Configuration Sub-Directories:
+------------------------------
+
+  nettest:
+    This configuration directory may be used to enable networking using the
+    an Microchip ENC28J60 SPI Ethernet module (see above for connection to
+    STR-P711).
+
   nsh:
     Configures the NuttShell (nsh) located at examples/nsh.  The
     Configuration enables both the serial and telnetd NSH interfaces.
@@ -432,4 +451,3 @@ STR71x-Specific Configuration Settings
   CONFIG_UARTn_BITS - The number of bits.  Must be either 7 or 8.
   CONFIG_UARTn_PARTIY - 0=no parity, 1=odd parity, 2=even parity, 3=mark 1, 4=space 0
   CONFIG_UARTn_2STOP - Two stop bits
-

configs/olimex-strp711/nsh/appconfig

@@ -1,44 +0,0 @@
-############################################################################
-# configs/olimex-strp711/nsh/appconfig
-#
-#   Copyright (C) 2011-2012 Gregory Nutt. All rights reserved.
-#   Author: Gregory Nutt <gnutt@nuttx.org>
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-#
-# 1. Redistributions of source code must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-# 2. Redistributions in binary form must reproduce the above copyright
-#    notice, this list of conditions and the following disclaimer in
-#    the documentation and/or other materials provided with the
-#    distribution.
-# 3. Neither the name NuttX nor the names of its contributors may be
-#    used to endorse or promote products derived from this software
-#    without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
-# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
-# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
-# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
-# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
-# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-# POSSIBILITY OF SUCH DAMAGE.
-#
-############################################################################
-
-# Path to example in apps/examples containing the user_start entry point
-
-CONFIGURED_APPS += examples/nsh
-
-# The NSH library
-
-CONFIGURED_APPS += system/readline
-CONFIGURED_APPS += nshlib
-