mirror of
https://github.com/apache/nuttx.git
synced 2026-06-06 00:14:22 +08:00
Add nettest config for str-p711 using enc28j60
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@2642 42af7a65-404d-4744-a932-0658087f49c3
This commit is contained in:
patacongo
@@ -228,9 +228,47 @@ GENERAL STEPS:
|
|||||||
The same commands from the telnet interface can now be accessed through the
|
The same commands from the telnet interface can now be accessed through the
|
||||||
'monitor' command, e.g. 'monitor help'
|
'monitor' command, e.g. 'monitor help'
|
||||||
|
|
||||||
|
ENC28J60 Module
|
||||||
|
^^^^^^^^^^^^^^^
|
||||||
|
|
||||||
|
Module CON5 QFN ENC2860 Description
|
||||||
|
--------------- -------------------------------------------------------
|
||||||
|
1 J8-1 NET CS 5 ~CS Chip select input pin for SPI interface (active low)
|
||||||
|
2 2 SCK 4 SCK Clock in pin for SPI interface
|
||||||
|
3 3 MOSI 3 SI Data in pin for SPI interface
|
||||||
|
4 4 MISO 2 SO Data out pin for SPI interface
|
||||||
|
5 5 GND -- --- ---
|
||||||
|
10 J9-1 3V3 -- --- ---
|
||||||
|
9 2 WOL 1 ~WOL Unicast WOL filter
|
||||||
|
8 3 NET INT 28 ~INT Interrupt output pin (active low)
|
||||||
|
7 4 CLKOUT 27 CLKOUT Programmable clock output pin
|
||||||
|
6 5 NET RST 6 ~RESET Active-low device Reset input
|
||||||
|
|
||||||
|
For the Olimex STR-P711, the ENC28J60 module is placed on SPI1 (with
|
||||||
|
the MMC slot) and uses P0.0 for CS, P0.1 for an interrupt, and P0.2 as
|
||||||
|
a reset:
|
||||||
|
|
||||||
|
Module CON5 Olimex STR-P711 Connection
|
||||||
|
--------------- -------------------------------------------------------
|
||||||
|
1 J8-1 NET CS SPI0-4 P0.0 P0.0/S0.MISO/U3.TX
|
||||||
|
2 2 SCK SPI1-5 SCLK1 P0.6/S1.SCLK
|
||||||
|
3 3 MOSI SPI1-3 MOSI1 P0.5/S1.MOSI
|
||||||
|
4 4 MISO SPI1-4 MISO1 P0.4/S1.MISO
|
||||||
|
5 5 GND SPI1-1 GND
|
||||||
|
10 J9-1 3V3 SPI1-6 3.3V
|
||||||
|
9 2 WOL NC
|
||||||
|
8 3 NET INT SPI0-3 P0.1 P0.1/S0.MOSI/U3.RX
|
||||||
|
7 4 CLKOUT NC
|
||||||
|
6 5 NET RST SPI0-5 P0.2 P0.2/S0
|
||||||
|
|
||||||
Configurations:
|
Configurations:
|
||||||
---------------
|
---------------
|
||||||
|
|
||||||
|
nettest:
|
||||||
|
This configuration directory may be used to enable networking using the
|
||||||
|
an Microchip ENC28J60 SPI ethernet module (see above for connection to
|
||||||
|
STR-P711.
|
||||||
|
|
||||||
nsh:
|
nsh:
|
||||||
Configures the NuttShell (nsh) located at examples/nsh. The
|
Configures the NuttShell (nsh) located at examples/nsh. The
|
||||||
Configuration enables both the serial and telnetd NSH interfaces.
|
Configuration enables both the serial and telnetd NSH interfaces.
|
||||||
|
|||||||
Executable
+160
@@ -0,0 +1,160 @@
|
|||||||
|
##############################################################################
|
||||||
|
# configs/olimex-strp711/nettest/Make.defs
|
||||||
|
#
|
||||||
|
# Copyright (C) 2010 Gregory Nutt. All rights reserved.
|
||||||
|
# Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||||
|
#
|
||||||
|
# Redistribution and use in source and binary forms, with or without
|
||||||
|
# modification, are permitted provided that the following conditions
|
||||||
|
# are met:
|
||||||
|
#
|
||||||
|
# 1. Redistributions of source code must retain the above copyright
|
||||||
|
# notice, this list of conditions and the following disclaimer.
|
||||||
|
# 2. Redistributions in binary form must reproduce the above copyright
|
||||||
|
# notice, this list of conditions and the following disclaimer in
|
||||||
|
# the documentation and/or other materials provided with the
|
||||||
|
# distribution.
|
||||||
|
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||||
|
# used to endorse or promote products derived from this software
|
||||||
|
# without specific prior written permission.
|
||||||
|
#
|
||||||
|
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||||
|
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||||
|
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||||
|
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||||
|
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||||
|
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||||
|
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||||
|
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||||
|
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||||
|
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||||
|
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||||
|
# POSSIBILITY OF SUCH DAMAGE.
|
||||||
|
#
|
||||||
|
##############################################################################
|
||||||
|
|
||||||
|
include ${TOPDIR}/.config
|
||||||
|
|
||||||
|
# The default value for CROSSDEV can be overridden from the make command line:
|
||||||
|
# make -- Will build for the NuttX buildroot toolchain
|
||||||
|
# make CROSSDEV=arm-eabi- -- Will build for the devkitARM toolchain
|
||||||
|
# make CROSSDEV=arm-none-eabi- -- Will build for the CodeSourcery toolchain
|
||||||
|
# make CROSSDEV=arm-elf- -- Will build for the NuttX buildroot toolchain
|
||||||
|
|
||||||
|
CROSSDEV = arm-elf-
|
||||||
|
CC = $(CROSSDEV)gcc
|
||||||
|
CXX = $(CROSSDEV)g++
|
||||||
|
CPP = $(CROSSDEV)gcc -E
|
||||||
|
LD = $(CROSSDEV)ld
|
||||||
|
AR = $(CROSSDEV)ar rcs
|
||||||
|
NM = $(CROSSDEV)nm
|
||||||
|
OBJCOPY = $(CROSSDEV)objcopy
|
||||||
|
OBJDUMP = $(CROSSDEV)objdump
|
||||||
|
|
||||||
|
HOSTOS = ${shell uname -o}
|
||||||
|
|
||||||
|
ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'}
|
||||||
|
ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1}
|
||||||
|
|
||||||
|
ifeq ($(ARCHCCMAJOR),4)
|
||||||
|
ifneq ($(HOSTOS),Cygwin)
|
||||||
|
OBJCOPYARGS = -R .note -R .note.gnu.build-id -R .comment
|
||||||
|
endif
|
||||||
|
endif
|
||||||
|
|
||||||
|
ifeq ($(CROSSDEV),arm-elf-)
|
||||||
|
MKDEP = $(TOPDIR)/tools/mkdeps.sh
|
||||||
|
ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
|
||||||
|
ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
|
||||||
|
ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/nettest/ld.script
|
||||||
|
MAXOPTIMIZATION = -Os
|
||||||
|
else
|
||||||
|
WINTOOL = y
|
||||||
|
DIRLINK = $(TOPDIR)/tools/winlink.sh
|
||||||
|
DIRUNLINK = $(TOPDIR)/tools/unlink.sh
|
||||||
|
MKDEP = $(TOPDIR)/tools/mknulldeps.sh
|
||||||
|
ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
|
||||||
|
ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
|
||||||
|
ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/nettest/ld.script}"
|
||||||
|
MAXOPTIMIZATION = -O2
|
||||||
|
endif
|
||||||
|
|
||||||
|
ifeq ("${CONFIG_DEBUG_SYMBOLS}","y")
|
||||||
|
ARCHOPTIMIZATION = -g
|
||||||
|
else
|
||||||
|
ARCHOPTIMIZATION = $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer
|
||||||
|
endif
|
||||||
|
|
||||||
|
ifeq ($(ARCHCCMAJOR),4)
|
||||||
|
ARCHCPUFLAGS = -mcpu=arm7tdmi -mfloat-abi=soft
|
||||||
|
else
|
||||||
|
ARCHCPUFLAGS = -mapcs-32 -mcpu=arm7tdmi -msoft-float
|
||||||
|
endif
|
||||||
|
|
||||||
|
ARCHCFLAGS = -fno-builtin
|
||||||
|
ARCHCXXFLAGS = -fno-builtin -fno-exceptions
|
||||||
|
ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10
|
||||||
|
ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow
|
||||||
|
ARCHWARNINGSXX = -Wall -Wshadow
|
||||||
|
ARCHDEFINES =
|
||||||
|
|
||||||
|
CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) \
|
||||||
|
$(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) -pipe
|
||||||
|
CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
|
||||||
|
CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) \
|
||||||
|
$(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) -pipe
|
||||||
|
CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
|
||||||
|
CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES)
|
||||||
|
AFLAGS = $(CFLAGS) -D__ASSEMBLY__
|
||||||
|
|
||||||
|
NXFLATLDFLAGS1 = -r -d -warn-common
|
||||||
|
NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) \
|
||||||
|
-T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat.ld \
|
||||||
|
-no-check-sections
|
||||||
|
LDNXFLATFLAGS = -e main -s 2048
|
||||||
|
|
||||||
|
OBJEXT = .o
|
||||||
|
LIBEXT = .a
|
||||||
|
EXEEXT =
|
||||||
|
|
||||||
|
ifneq ($(CROSSDEV),arm-elf-)
|
||||||
|
LDFLAGS += -nostartfiles -nodefaultlibs
|
||||||
|
endif
|
||||||
|
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
|
||||||
|
LDFLAGS += -g
|
||||||
|
endif
|
||||||
|
|
||||||
|
define PREPROCESS
|
||||||
|
@echo "CPP: $1->$2"
|
||||||
|
@$(CPP) $(CPPFLAGS) $1 -o $2
|
||||||
|
endef
|
||||||
|
|
||||||
|
define COMPILE
|
||||||
|
@echo "CC: $1"
|
||||||
|
@$(CC) -c $(CFLAGS) $1 -o $2
|
||||||
|
endef
|
||||||
|
|
||||||
|
define COMPILEXX
|
||||||
|
@echo "CXX: $1"
|
||||||
|
@$(CXX) -c $(CXXFLAGS) $1 -o $2
|
||||||
|
endef
|
||||||
|
|
||||||
|
define ASSEMBLE
|
||||||
|
@echo "AS: $1"
|
||||||
|
@$(CC) -c $(AFLAGS) $1 -o $2
|
||||||
|
endef
|
||||||
|
|
||||||
|
define ARCHIVE
|
||||||
|
echo "AR: $2"; \
|
||||||
|
$(AR) $1 $2 || { echo "$(AR) $1 $2 FAILED!" ; exit 1 ; }
|
||||||
|
endef
|
||||||
|
|
||||||
|
define CLEAN
|
||||||
|
@rm -f *.o *.a
|
||||||
|
endef
|
||||||
|
|
||||||
|
HOSTCC = gcc
|
||||||
|
HOSTINCLUDES = -I.
|
||||||
|
HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe
|
||||||
|
HOSTLDFLAGS =
|
||||||
|
|
||||||
Executable
+767
File diff suppressed because it is too large
Load Diff
Executable
+122
@@ -0,0 +1,122 @@
|
|||||||
|
/****************************************************************************
|
||||||
|
* configs/olimex-strp711/nettest/ld.script
|
||||||
|
*
|
||||||
|
* Copyright (C) 2010 Gregory Nutt. All rights reserved.
|
||||||
|
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||||
|
*
|
||||||
|
* Redistribution and use in source and binary forms, with or without
|
||||||
|
* modification, are permitted provided that the following conditions
|
||||||
|
* are met:
|
||||||
|
*
|
||||||
|
* 1. Redistributions of source code must retain the above copyright
|
||||||
|
* notice, this list of conditions and the following disclaimer.
|
||||||
|
* 2. Redistributions in binary form must reproduce the above copyright
|
||||||
|
* notice, this list of conditions and the following disclaimer in
|
||||||
|
* the documentation and/or other materials provided with the
|
||||||
|
* distribution.
|
||||||
|
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||||
|
* used to endorse or promote products derived from this software
|
||||||
|
* without specific prior written permission.
|
||||||
|
*
|
||||||
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||||
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||||
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||||
|
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||||
|
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||||
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||||
|
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||||
|
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||||
|
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||||
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||||
|
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||||
|
* POSSIBILITY OF SUCH DAMAGE.
|
||||||
|
*
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
/* The str71x has 256Kb of non-volatile memory beginning at address
|
||||||
|
* 0x4000:0000 for program storage (Bank0, an addition 16Kb is available
|
||||||
|
* for data storage in Bank1). The OS entry point is via the reset vector
|
||||||
|
* at address 0x00000000 where the FLASH is remapped at reset.
|
||||||
|
*
|
||||||
|
* The str71x has 64Kb of on-chip static RAM beginning at address
|
||||||
|
* 0x2000:0000. The .data section will be relocated from _eronly
|
||||||
|
* to _sdata at boot time.
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* The STR711 has 256Kb of FLASH beginning at address 0x4000:0000 and 64Kb
|
||||||
|
* of SRAM beginning at address 0x2000:0000
|
||||||
|
*/
|
||||||
|
|
||||||
|
MEMORY
|
||||||
|
{
|
||||||
|
flash (rx) : ORIGIN = 0x40000000, LENGTH = 256K
|
||||||
|
sram (rwx) : ORIGIN = 0x20000000, LENGTH = 64K
|
||||||
|
}
|
||||||
|
|
||||||
|
OUTPUT_ARCH(arm)
|
||||||
|
ENTRY(_stext)
|
||||||
|
SECTIONS
|
||||||
|
{
|
||||||
|
.text : {
|
||||||
|
_stext = ABSOLUTE(.);
|
||||||
|
*(.vectors)
|
||||||
|
*(.text .text.*)
|
||||||
|
*(.fixup)
|
||||||
|
*(.gnu.warning)
|
||||||
|
*(.rodata .rodata.*)
|
||||||
|
*(.gnu.linkonce.t.*)
|
||||||
|
*(.glue_7)
|
||||||
|
*(.glue_7t)
|
||||||
|
*(.got)
|
||||||
|
*(.gcc_except_table)
|
||||||
|
*(.gnu.linkonce.r.*)
|
||||||
|
_etext = ABSOLUTE(.);
|
||||||
|
} > flash
|
||||||
|
|
||||||
|
/* This is where the .data section is relocated for execution out
|
||||||
|
* FLASH. The .data section will be relocated from _eronly
|
||||||
|
* to _sdata at boot time.
|
||||||
|
*/
|
||||||
|
|
||||||
|
_eronly = ABSOLUTE(.);
|
||||||
|
|
||||||
|
.data : {
|
||||||
|
_sdata = ABSOLUTE(.);
|
||||||
|
*(.data .data.*)
|
||||||
|
*(.gnu.linkonce.d.*)
|
||||||
|
CONSTRUCTORS
|
||||||
|
_edata = ABSOLUTE(.);
|
||||||
|
} > sram AT > flash
|
||||||
|
|
||||||
|
.ARM.extab : {
|
||||||
|
*(.ARM.extab*)
|
||||||
|
} >sram
|
||||||
|
|
||||||
|
.ARM.exidx : {
|
||||||
|
__exidx_start = ABSOLUTE(.);
|
||||||
|
*(.ARM.exidx*)
|
||||||
|
__exidx_end = ABSOLUTE(.);
|
||||||
|
} >sram
|
||||||
|
|
||||||
|
.bss : {
|
||||||
|
_sbss = ABSOLUTE(.);
|
||||||
|
*(.bss .bss.*)
|
||||||
|
*(.gnu.linkonce.b.*)
|
||||||
|
*(COMMON)
|
||||||
|
_ebss = ABSOLUTE(.);
|
||||||
|
} > sram
|
||||||
|
|
||||||
|
/* Stabs debugging sections. */
|
||||||
|
.stab 0 : { *(.stab) }
|
||||||
|
.stabstr 0 : { *(.stabstr) }
|
||||||
|
.stab.excl 0 : { *(.stab.excl) }
|
||||||
|
.stab.exclstr 0 : { *(.stab.exclstr) }
|
||||||
|
.stab.index 0 : { *(.stab.index) }
|
||||||
|
.stab.indexstr 0 : { *(.stab.indexstr) }
|
||||||
|
.comment 0 : { *(.comment) }
|
||||||
|
.debug_abbrev 0 : { *(.debug_abbrev) }
|
||||||
|
.debug_info 0 : { *(.debug_info) }
|
||||||
|
.debug_line 0 : { *(.debug_line) }
|
||||||
|
.debug_pubnames 0 : { *(.debug_pubnames) }
|
||||||
|
.debug_aranges 0 : { *(.debug_aranges) }
|
||||||
|
}
|
||||||
Executable
+47
@@ -0,0 +1,47 @@
|
|||||||
|
#!/bin/bash
|
||||||
|
# configs/olimex-strp711/nettest/setenv.sh
|
||||||
|
#
|
||||||
|
# Copyright (C) 2010 Gregory Nutt. All rights reserved.
|
||||||
|
# Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||||
|
#
|
||||||
|
# Redistribution and use in source and binary forms, with or without
|
||||||
|
# modification, are permitted provided that the following conditions
|
||||||
|
# are met:
|
||||||
|
#
|
||||||
|
# 1. Redistributions of source code must retain the above copyright
|
||||||
|
# notice, this list of conditions and the following disclaimer.
|
||||||
|
# 2. Redistributions in binary form must reproduce the above copyright
|
||||||
|
# notice, this list of conditions and the following disclaimer in
|
||||||
|
# the documentation and/or other materials provided with the
|
||||||
|
# distribution.
|
||||||
|
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||||
|
# used to endorse or promote products derived from this software
|
||||||
|
# without specific prior written permission.
|
||||||
|
#
|
||||||
|
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||||
|
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||||
|
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||||
|
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||||
|
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||||
|
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||||
|
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||||
|
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||||
|
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||||
|
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||||
|
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||||
|
# POSSIBILITY OF SUCH DAMAGE.
|
||||||
|
#
|
||||||
|
|
||||||
|
if [ "$(basename $0)" = "setenv.sh" ] ; then
|
||||||
|
echo "You must source this script, not run it!" 1>&2
|
||||||
|
exit 1
|
||||||
|
fi
|
||||||
|
|
||||||
|
if [ -z "${PATH_ORIG}" ]; then export PATH_ORIG="${PATH}"; fi
|
||||||
|
|
||||||
|
WD=`pwd`
|
||||||
|
export BUILDROOT_BIN="${WD}/../buildroot/build_arm_nofpu/staging_dir/bin"
|
||||||
|
export STR41XSCRIPTS="$WD/configs/olimex-strp711/scripts"
|
||||||
|
export PATH="${BUILDROOT_BIN}:${STR41XSCRIPTS}:/sbin:/usr/sbin:${PATH_ORIG}"
|
||||||
|
|
||||||
|
echo "PATH : ${PATH}"
|
||||||
Reference in New Issue
Block a user