diff --git a/configs/ea3131/include/board.h b/configs/ea3131/include/board.h index eadb7e2a163..0392e05a8fd 100755 --- a/configs/ea3131/include/board.h +++ b/configs/ea3131/include/board.h @@ -100,7 +100,6 @@ #define BOARD_CLKS_64_92 \ (0) - /* LED definitions ******************************************************************/ #define LED_STARTED 0 diff --git a/configs/ea3131/include/board_memorymap.h b/configs/ea3131/include/board_memorymap.h new file mode 100755 index 00000000000..f64b028a85c --- /dev/null +++ b/configs/ea3131/include/board_memorymap.h @@ -0,0 +1,116 @@ +/************************************************************************************ + * configs/ea3131/include/board_memorymap.h + * include/arch/board/board_memorymap.h + * + * Copyright (C) 2009 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ************************************************************************************/ + +#ifndef __ARCH_BOARD_BOARD_MEMORYMAP_H +#define __ARCH_BOARD_BOARD_MEMORYMAP_H + +/* This file should never be included directly, but only indirectly via + * lpc313x_memorymap.h. + */ + +/************************************************************************************ + * Included Files + ************************************************************************************/ + +#include + +/************************************************************************************ + * Definitions + ************************************************************************************/ + +/* If the LPC313x ROM page table is selected, then the board-logic is required + * to provide: + * + * PGTABLE_BASE_PADDR - The physical address of the page table in ROM, + * PGTABLE_BASE_VADDR - The mapped address of the page table in ROM, and + * Mappings for each of the PSECTIONS in lpc313x_memorymap.h + */ + +#ifdef CONFIG_ARCH_ROMPGTABLE + /* The LPC313x ROM page table uses a 1-1 physical to virtual memory mapping */ + +# define LPC313X_SHADOWSPACE_VSECTION 0x00000000 /* 0x00000000-0x00000fff: Shadow Area 4Kb */ +# define LPC313X_INTSRAM_VSECTION 0x11028000 /* Internal SRAM 96Kb-192Kb */ +# define LPC313X_INTSRAM0_VADDR 0x11028000 /* 0x11028000-0x1103ffff: Internal SRAM 0 96Kb */ +# define LPC313X_INTSRAM1_VADDR 0x11040000 /* 0x11040000-0x11057fff: Internal SRAM 1 96Kb */ +# define LPC313X_INTSROM0_VSECTION 0x12000000 /* 0x12000000-0x1201ffff: Internal SROM 0 128Kb */ +# define LPC313X_APB0_VSECTION 0x13000000 /* 0x13000000-0x13007fff: APB0 32Kb */ +# define LPC313X_APB1_VSECTION 0x13008000 /* 0x13008000-0x1300bfff: APB1 16Kb */ +# define LPC313X_APB2_VSECTION 0x15000000 /* 0x15000000-0x15003fff: APB2 16Kb */ +# define LPC313X_APB3_VSECTION 0x16000000 /* 0x16000000-0x160003ff: APB3 1Kb */ +# define LPC313X_APB4MPMC_VSECTION 0x17000000 /* 8Kb */ +# define LPC313X_APB4_VADDR 0x17000000 /* 0x17000000-0x17000fff: APB4 4Kb */ +# define LPC313X_MPMC_VADDR 0x17008000 /* 0x17008000-0x17008fff: MPMC cfg 4Kb */ +# define LPC313X_MCI_VSECTION 0x18000000 /* 0x18000000 0x180003ff: MCI/SD/SDIO 1Kb */ +# define LPC313X_USBOTG_VSECTION 0x19000000 /* 0x19000000-0x19000fff: USB OTG 4Kb */ +# define LPC313X_EXTSRAM_VSECTION 0x20020000 /* 64-128Kb */ +# define LPC313X_EXTSRAM0_VADDR 0x20000000 /* 0x20000000-0x2001ffff: External SRAM 0 64-128Kb */ +# define LPC313X_EXTSRAM1_VADDR 0x20020000 /* 0x20020000-0x2003ffff: External SRAM 1 64-128Kb */ +# define LPC313X_EXTSDRAM0_VSECTION 0x30000000 /* 0x30000000-0x37ffffff: External SDRAM 0 128Mb */ +# define LPC313X_INTC_VSECTION 0x60000000 /* 0x60000000-0x60000fff: Interrupt controller 4Kb */ +# define LPC313X_NAND_VSECTION 0x70000000 /* 0x70000000-0x700007ff: NANDFLASH Ctrl 2Kb */ + + /* Define the address of the page table within the ROM */ + +# define ROMPGTABLE_OFFSET 0x0001c00 /* Offset of the ROM page table in ROM */ +# define PGTABLE_BASE_PADDR (LPC313X_INTSROM0_PSECTION+ROMPGTABLE_OFFSET) +# define PGTABLE_BASE_VADDR (LPC313X_INTSROM0_VSECTION+ROMPGTABLE_OFFSET) +#endif + +/************************************************************************************ + * Public Data + ************************************************************************************/ + +#ifndef __ASSEMBLY__ + +#undef EXTERN +#if defined(__cplusplus) +#define EXTERN extern "C" +extern "C" { +#else +#define EXTERN extern +#endif + +/************************************************************************************ + * Public Function Prototypes + ************************************************************************************/ +#undef EXTERN +#if defined(__cplusplus) +} +#endif + +#endif /* __ASSEMBLY__ */ +#endif /* __ARCH_BOARD_BOARD_MEMORYMAP_H */ diff --git a/configs/ea3131/ostest/defconfig b/configs/ea3131/ostest/defconfig index 8f0a73a3f0d..f45119fdf6a 100755 --- a/configs/ea3131/ostest/defconfig +++ b/configs/ea3131/ostest/defconfig @@ -96,17 +96,15 @@ CONFIG_ARCH_DMA=n # # ARM-specific configuration # -# CONFIG_ARM_LOWVECTORS - define if vectors reside at address 0x0000:00000 +# CONFIG_ARCH_LOWVECTORS - define if vectors reside at address 0x0000:00000 # Undefine if vectors reside at address 0xffff:0000 -# CONFIG_ARM_ROMPGTABLE - A pre-initialized, read-only page table is available -# CONFIG_PGTABLE_BASE must also be defined in this case. -# CONFIG_PGTABLE_BASE - The (physical) base address of the pre-initialized -# read-only page table vector. This must be provided if CONFIG_ARM_ROMPGTABLE -# is defined. +# CONFIG_ARCH_ROMPGTABLE - A pre-initialized, read-only page table is available. +# If defined, then board-specific logic must also define PGTABLE_BASE_PADDR, +# PGTABLE_BASE_VADDR, and all memory section mapping in a file named +# board_memorymap.h. # -CONFIG_ARM_LOWVECTORS=y -CONFIG_ARM_ROMPGTABLE=n -#CONFIG_PGTABLE_BASE= +CONFIG_ARCH_LOWVECTORS=y +CONFIG_ARCH_ROMPGTABLE=y # Identify toolchain and linker options # diff --git a/configs/mx1ads/ostest/defconfig b/configs/mx1ads/ostest/defconfig index 6948c2bb514..f3dc4a970c1 100644 --- a/configs/mx1ads/ostest/defconfig +++ b/configs/mx1ads/ostest/defconfig @@ -52,8 +52,6 @@ # CONFIG_DRAM_SIZE - Describes the installed DRAM. # CONFIG_DRAM_START - The start address of DRAM (physical) # CONFIG_DRAM_VSTART - The startaddress of DRAM (virtual) -# CONFIG_ARCH_LOWVECTORS - Leave ARM interrupt vectors at 0x0000:0000 -# instead of moving to 0xffff:0000 # CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt # stack. If defined, this symbol is the size of the interrupt # stack in bytes. If not defined, the user task stacks will be @@ -72,24 +70,20 @@ CONFIG_DRAM_SIZE=0x01000000 CONFIG_DRAM_START=0x08000000 CONFIG_DRAM_VSTART=0x00000000 CONFIG_DRAM_NUTTXENTRY=0x01004000 -CONFIG_ARCH_LOWVECTORS=y CONFIG_ARCH_INTERRUPTSTACK=n CONFIG_ARCH_STACKDUMP=y # # ARM-specific configuration # -# CONFIG_ARM_LOWVECTORS - define if vectors reside at address 0x0000:00000 +# CONFIG_ARCH_LOWVECTORS - define if vectors reside at address 0x0000:00000 # Undefine if vectors reside at address 0xffff:0000 -# CONFIG_ARM_ROMPGTABLE - A pre-initialized, read-only page table is available -# CONFIG_PGTABLE_BASE must also be defined in this case. -# CONFIG_PGTABLE_BASE - The (physical) base address of the pre-initialized -# read-only page table vector. This must be provided if CONFIG_ARM_ROMPGTABLE -# is defined. +# CONFIG_ARCH_ROMPGTABLE - A pre-initialized, read-only page table is available. +# If defined, then board-specific logic must also define PGTABLE_BASE_PADDR, +# PGTABLE_BASE_VADDR, and all memory section mapping, possibly in board.h # -CONFIG_ARM_LOWVECTORS=n -CONFIG_ARM_ROMPGTABLE=n -#CONFIG_PGTABLE_BASE= +CONFIG_ARCH_LOWVECTORS=y +CONFIG_ARCH_ROMPGTABLE=n # # IMX specific serial device driver settings diff --git a/configs/ntosd-dm320/nettest/defconfig b/configs/ntosd-dm320/nettest/defconfig index 5c013f92d01..bc1b729dffa 100644 --- a/configs/ntosd-dm320/nettest/defconfig +++ b/configs/ntosd-dm320/nettest/defconfig @@ -76,17 +76,14 @@ CONFIG_ARCH_STACKDUMP=n # # ARM-specific configuration # -# CONFIG_ARM_LOWVECTORS - define if vectors reside at address 0x0000:00000 +# CONFIG_ARCH_LOWVECTORS - define if vectors reside at address 0x0000:00000 # Undefine if vectors reside at address 0xffff:0000 -# CONFIG_ARM_ROMPGTABLE - A pre-initialized, read-only page table is available -# CONFIG_PGTABLE_BASE must also be defined in this case. -# CONFIG_PGTABLE_BASE - The (physical) base address of the pre-initialized -# read-only page table vector. This must be provided if CONFIG_ARM_ROMPGTABLE -# is defined. +# CONFIG_ARCH_ROMPGTABLE - A pre-initialized, read-only page table is available. +# If defined, then board-specific logic must also define PGTABLE_BASE_PADDR, +# PGTABLE_BASE_VADDR, and all memory section mapping, possibly in board.h # -CONFIG_ARM_LOWVECTORS=n -CONFIG_ARM_ROMPGTABLE=n -#CONFIG_PGTABLE_BASE= +CONFIG_ARCH_LOWVECTORS=n +CONFIG_ARCH_ROMPGTABLE=n # # DM320 specific device driver settings diff --git a/configs/ntosd-dm320/nsh/defconfig b/configs/ntosd-dm320/nsh/defconfig index 0c77a08820b..6d41bc58653 100644 --- a/configs/ntosd-dm320/nsh/defconfig +++ b/configs/ntosd-dm320/nsh/defconfig @@ -76,17 +76,14 @@ CONFIG_ARCH_STACKDUMP=n # # ARM-specific configuration # -# CONFIG_ARM_LOWVECTORS - define if vectors reside at address 0x0000:00000 +# CONFIG_ARCH_LOWVECTORS - define if vectors reside at address 0x0000:00000 # Undefine if vectors reside at address 0xffff:0000 -# CONFIG_ARM_ROMPGTABLE - A pre-initialized, read-only page table is available -# CONFIG_PGTABLE_BASE must also be defined in this case. -# CONFIG_PGTABLE_BASE - The (physical) base address of the pre-initialized -# read-only page table vector. This must be provided if CONFIG_ARM_ROMPGTABLE -# is defined. +# CONFIG_ARCH_ROMPGTABLE - A pre-initialized, read-only page table is available. +# If defined, then board-specific logic must also define PGTABLE_BASE_PADDR, +# PGTABLE_BASE_VADDR, and all memory section mapping, possibly in board.h # -CONFIG_ARM_LOWVECTORS=n -CONFIG_ARM_ROMPGTABLE=n -#CONFIG_PGTABLE_BASE= +CONFIG_ARCH_LOWVECTORS=n +CONFIG_ARCH_ROMPGTABLE=n # # DM320 specific device driver settings diff --git a/configs/ntosd-dm320/ostest/defconfig b/configs/ntosd-dm320/ostest/defconfig index 904918639a4..b4e38b347af 100644 --- a/configs/ntosd-dm320/ostest/defconfig +++ b/configs/ntosd-dm320/ostest/defconfig @@ -76,17 +76,14 @@ CONFIG_ARCH_STACKDUMP=y # # ARM-specific configuration # -# CONFIG_ARM_LOWVECTORS - define if vectors reside at address 0x0000:00000 +# CONFIG_ARCH_LOWVECTORS - define if vectors reside at address 0x0000:00000 # Undefine if vectors reside at address 0xffff:0000 -# CONFIG_ARM_ROMPGTABLE - A pre-initialized, read-only page table is available -# CONFIG_PGTABLE_BASE must also be defined in this case. -# CONFIG_PGTABLE_BASE - The (physical) base address of the pre-initialized -# read-only page table vector. This must be provided if CONFIG_ARM_ROMPGTABLE -# is defined. +# CONFIG_ARCH_ROMPGTABLE - A pre-initialized, read-only page table is available. +# If defined, then board-specific logic must also define PGTABLE_BASE_PADDR, +# PGTABLE_BASE_VADDR, and all memory section mapping, possibly in board.h # -CONFIG_ARM_LOWVECTORS=n -CONFIG_ARM_ROMPGTABLE=n -#CONFIG_PGTABLE_BASE= +CONFIG_ARCH_LOWVECTORS=n +CONFIG_ARCH_ROMPGTABLE=n # # DM320 specific device driver settings diff --git a/configs/ntosd-dm320/poll/defconfig b/configs/ntosd-dm320/poll/defconfig index ffb97dbf36e..bdbab6be3af 100644 --- a/configs/ntosd-dm320/poll/defconfig +++ b/configs/ntosd-dm320/poll/defconfig @@ -76,17 +76,14 @@ CONFIG_ARCH_STACKDUMP=n # # ARM-specific configuration # -# CONFIG_ARM_LOWVECTORS - define if vectors reside at address 0x0000:00000 +# CONFIG_ARCH_LOWVECTORS - define if vectors reside at address 0x0000:00000 # Undefine if vectors reside at address 0xffff:0000 -# CONFIG_ARM_ROMPGTABLE - A pre-initialized, read-only page table is available -# CONFIG_PGTABLE_BASE must also be defined in this case. -# CONFIG_PGTABLE_BASE - The (physical) base address of the pre-initialized -# read-only page table vector. This must be provided if CONFIG_ARM_ROMPGTABLE -# is defined. +# CONFIG_ARCH_ROMPGTABLE - A pre-initialized, read-only page table is available. +# If defined, then board-specific logic must also define PGTABLE_BASE_PADDR, +# PGTABLE_BASE_VADDR, and all memory section mapping, possibly in board.h # -CONFIG_ARM_LOWVECTORS=n -CONFIG_ARM_ROMPGTABLE=n -#CONFIG_PGTABLE_BASE= +CONFIG_ARCH_LOWVECTORS=n +CONFIG_ARCH_ROMPGTABLE=n # # DM320 specific device driver settings diff --git a/configs/ntosd-dm320/thttpd/defconfig b/configs/ntosd-dm320/thttpd/defconfig index e5eb6ee76b4..7cb7cce17d2 100644 --- a/configs/ntosd-dm320/thttpd/defconfig +++ b/configs/ntosd-dm320/thttpd/defconfig @@ -76,17 +76,14 @@ CONFIG_ARCH_STACKDUMP=n # # ARM-specific configuration # -# CONFIG_ARM_LOWVECTORS - define if vectors reside at address 0x0000:00000 +# CONFIG_ARCH_LOWVECTORS - define if vectors reside at address 0x0000:00000 # Undefine if vectors reside at address 0xffff:0000 -# CONFIG_ARM_ROMPGTABLE - A pre-initialized, read-only page table is available -# CONFIG_PGTABLE_BASE must also be defined in this case. -# CONFIG_PGTABLE_BASE - The (physical) base address of the pre-initialized -# read-only page table vector. This must be provided if CONFIG_ARM_ROMPGTABLE -# is defined. +# CONFIG_ARCH_ROMPGTABLE - A pre-initialized, read-only page table is available. +# If defined, then board-specific logic must also define PGTABLE_BASE_PADDR, +# PGTABLE_BASE_VADDR, and all memory section mapping, possibly in board.h # -CONFIG_ARM_LOWVECTORS=n -CONFIG_ARM_ROMPGTABLE=n -#CONFIG_PGTABLE_BASE= +CONFIG_ARCH_LOWVECTORS=n +CONFIG_ARCH_ROMPGTABLE=n # # DM320 specific device driver settings diff --git a/configs/ntosd-dm320/udp/defconfig b/configs/ntosd-dm320/udp/defconfig index ffea2b946a5..4ed686bc9d2 100644 --- a/configs/ntosd-dm320/udp/defconfig +++ b/configs/ntosd-dm320/udp/defconfig @@ -76,17 +76,14 @@ CONFIG_ARCH_STACKDUMP=n # # ARM-specific configuration # -# CONFIG_ARM_LOWVECTORS - define if vectors reside at address 0x0000:00000 +# CONFIG_ARCH_LOWVECTORS - define if vectors reside at address 0x0000:00000 # Undefine if vectors reside at address 0xffff:0000 -# CONFIG_ARM_ROMPGTABLE - A pre-initialized, read-only page table is available -# CONFIG_PGTABLE_BASE must also be defined in this case. -# CONFIG_PGTABLE_BASE - The (physical) base address of the pre-initialized -# read-only page table vector. This must be provided if CONFIG_ARM_ROMPGTABLE -# is defined. +# CONFIG_ARCH_ROMPGTABLE - A pre-initialized, read-only page table is available. +# If defined, then board-specific logic must also define PGTABLE_BASE_PADDR, +# PGTABLE_BASE_VADDR, and all memory section mapping, possibly in board.h # -CONFIG_ARM_LOWVECTORS=n -CONFIG_ARM_ROMPGTABLE=n -#CONFIG_PGTABLE_BASE= +CONFIG_ARCH_LOWVECTORS=n +CONFIG_ARCH_ROMPGTABLE=n # # DM320 specific device driver settings diff --git a/configs/ntosd-dm320/uip/defconfig b/configs/ntosd-dm320/uip/defconfig index 288a65f0ee2..13903db6012 100644 --- a/configs/ntosd-dm320/uip/defconfig +++ b/configs/ntosd-dm320/uip/defconfig @@ -76,17 +76,14 @@ CONFIG_ARCH_STACKDUMP=n # # ARM-specific configuration # -# CONFIG_ARM_LOWVECTORS - define if vectors reside at address 0x0000:00000 +# CONFIG_ARCH_LOWVECTORS - define if vectors reside at address 0x0000:00000 # Undefine if vectors reside at address 0xffff:0000 -# CONFIG_ARM_ROMPGTABLE - A pre-initialized, read-only page table is available -# CONFIG_PGTABLE_BASE must also be defined in this case. -# CONFIG_PGTABLE_BASE - The (physical) base address of the pre-initialized -# read-only page table vector. This must be provided if CONFIG_ARM_ROMPGTABLE -# is defined. +# CONFIG_ARCH_ROMPGTABLE - A pre-initialized, read-only page table is available. +# If defined, then board-specific logic must also define PGTABLE_BASE_PADDR, +# PGTABLE_BASE_VADDR, and all memory section mapping, possibly in board.h # -CONFIG_ARM_LOWVECTORS=n -CONFIG_ARM_ROMPGTABLE=n -#CONFIG_PGTABLE_BASE= +CONFIG_ARCH_LOWVECTORS=n +CONFIG_ARCH_ROMPGTABLE=n # # DM320 specific device driver settings