Remove some old logic in the arm, x86, hc, and sh linker scripts that was kicked off when CONFIG_BOOT_RUNFROMFLASH=y.

git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5117 42af7a65-404d-4744-a932-0658087f49c3

ChangeLog

@@ -3284,4 +3284,12 @@
 	* configs/shenzhou:  Add beginnings of a board configuration for the
 	  Shenzhou STM32107 board (see www.armjishu.com).  Very little is in
 	  place as of this initial check-in.
+	* QEMU: Fixes from Richard Cochran to build QEMU with Kconfig files.
+	* arch/*/src/Makefile:  Remove some old logic that was kicked off
+	  when CONFIG_BOOT_RUNFROMFLASH=y.  The old logic used to use
+	  objcopy to move sections.  Newer logic changes the load position
+	  of sections in the the linker script.  As far as I can tell, there
+	  is nothing in the source tree now that depends on the old way of
+	  doing things (if I am wrong, they will need a change to the linker
+	  script).
 

arch/arm/src/Makefile

@@ -111,11 +111,6 @@ nuttx: $(HEAD_OBJ) board/libboard$(LIBEXT)
 	@echo "LD: nuttx"
 	@$(LD) --entry=__start $(LDFLAGS) $(LIBPATHS) -o $(NUTTX)$(EXEEXT) $(HEAD_OBJ) $(EXTRA_OBJS) \
 		--start-group $(LDLIBS) -lboard $(EXTRA_LIBS) $(LIBGCC) --end-group
-ifeq ($(CONFIG_BOOT_RUNFROMFLASH),y)
-	@export flashloc=`$(OBJDUMP) --all-headers $(NUTTX)$(EXEEXT) | grep _eronly | cut -d' ' -f1`;  \
-	$(OBJCOPY) $(OBJCOPYARGS) --adjust-section-vma=.data=0x$$flashloc $(NUTTX)$(EXEEXT) $(NUTTX).flashimage
-	@mv $(NUTTX).flashimage $(NUTTX)$(EXEEXT)
-endif
 	@$(NM) $(NUTTX)$(EXEEXT) | \
 	grep -v '\(compiled\)\|\(\$(OBJEXT)$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \
 	sort > $(TOPDIR)/System.map

arch/hc/src/Makefile

@@ -107,11 +107,6 @@ nuttx: $(HEAD_OBJ) board/libboard$(LIBEXT)
 	@echo "LD: nuttx"
 	@$(LD) --entry=__start $(LDFLAGS) $(LIBPATHS) -o $(NUTTX)$(EXEEXT) $(HEAD_OBJ) \
 		--start-group $(LDLIBS) -lboard $(EXTRA_LIBS) $(LIBGCC) --end-group
-ifeq ($(CONFIG_BOOT_RUNFROMFLASH),y)
-	@export flashloc=`$(OBJDUMP) --all-headers $(NUTTX)$(EXEEXT) | grep _eronly | cut -d' ' -f1`;  \
-	$(OBJCOPY) $(OBJCOPYARGS) --adjust-section-vma=.data=0x$$flashloc $(NUTTX)$(EXEEXT) $(NUTTX).flashimage
-	@mv $(NUTTX).flashimage $(NUTTX)$(EXEEXT)
-endif
 	@$(NM) $(NUTTX)$(EXEEXT) | \
 	grep -v '\(compiled\)\|\(\$(OBJEXT)$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \
 	sort > $(TOPDIR)/System.map

arch/sh/src/Makefile

@@ -85,11 +85,6 @@ nuttx: $(HEAD_OBJ) board/libboard$(LIBEXT)
 	@echo "LD: nuttx"
 	@$(LD) --entry=__start $(LDFLAGS) $(LDPATHES) -L$(BOARDDIR) -o $(TOPDIR)/$@ $(HEAD_OBJ) \
 		--start-group $(LDLIBS) -lboard $(EXTRA_LIBS) $(LIBGCC) --end-group
-ifeq ($(CONFIG_BOOT_RUNFROMFLASH),y)
-	@export flashloc=`$(OBJDUMP) --all-headers $(TOPDIR)/$@ | grep _eronly | cut -d' ' -f1`;  \
-	$(OBJCOPY) --adjust-section-vma=.data=0x$$flashloc $(TOPDIR)/$@ $(TOPDIR)/$@.flashimage
-	@mv $(TOPDIR)/$@.flashimage $(TOPDIR)/$@
-endif
 	@$(NM) $(TOPDIR)/$@ | \
 	grep -v '\(compiled\)\|\(\$(OBJEXT)$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \
 	sort > $(TOPDIR)/System.map

arch/x86/src/Makefile

@@ -113,11 +113,6 @@ nuttx$(EXEEXT): $(HEAD_OBJ) board/libboard$(LIBEXT)
 	@echo "LD: nuttx$(EXEEXT)"
 	@$(LD) --entry=__start $(LDFLAGS) $(LIBPATHS) -o $(NUTTX)$(EXEEXT) $(HEAD_OBJ) $(EXTRA_OBJS) \
 		--start-group $(LDLIBS) -lboard $(EXTRA_LIBS) $(LIBGCC) --end-group
-ifeq ($(CONFIG_BOOT_RUNFROMFLASH),y)
-	@export flashloc=`$(OBJDUMP) --all-headers $(NUTTX)$(EXEEXT) | grep _eronly | cut -d' ' -f1`;  \
-	$(OBJCOPY) $(OBJCOPYARGS) --adjust-section-vma=.data=0x$$flashloc $(NUTTX)$(EXEEXT) $(NUTTX).flashimage
-	@mv $(NUTTX).flashimage $(NUTTX)$(EXEEXT)
-endif
 	@$(NM) $(NUTTX)$(EXEEXT) | \
 	grep -v '\(compiled\)\|\(\$(OBJEXT)$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \
 	sort > $(TOPDIR)/System.map