For PIC32MZ MCUs, rename up_spiinitialize to pic32mz_spibus_initialize

configs/pcblogic-pic32mx/src/pcblogic-pic32mx.h

@@ -69,7 +69,7 @@ extern "C" {
 #endif
 
 /************************************************************************************
- * Name: pic32mx_spiinitialize
+ * Name: pic32mx_spidev_initialize
  *
  * Description:
  *   Called to configure SPI chip select GPIO pins for the PCB Logic board.
@@ -77,7 +77,7 @@ extern "C" {
  ************************************************************************************/
 
 #if defined(CONFIG_PIC32MX_SPI1) || defined(CONFIG_PIC32MX_SPI2)
-EXTERN void weak_function pic32mx_spiinitialize(void);
+EXTERN void weak_function pic32mx_spidev_initialize(void);
 #endif
 
 /************************************************************************************

configs/pcblogic-pic32mx/src/pic32mx_boot.c

@@ -74,13 +74,13 @@
 void pic32mx_boardinitialize(void)
 {
   /* Configure SPI chip selects if 1) at least one SPI is enabled, and 2) the weak
-   * function pic32mx_spiinitialize() has been brought into the link.
+   * function pic32mx_spidev_initialize() has been brought into the link.
    */
 
 #if defined(CONFIG_PIC32MX_SPI1) || defined(CONFIG_PIC32MX_SPI2)
-  if (pic32mx_spiinitialize)
+  if (pic32mx_spidev_initialize)
     {
-      pic32mx_spiinitialize();
+      pic32mx_spidev_initialize();
     }
 #endif
 

configs/pic32mx-starterkit/src/pic32mx-starterkit.h

@@ -91,7 +91,7 @@ extern "C"
 #endif
 
 /************************************************************************************
- * Name: pic32mx_spiinitialize
+ * Name: pic32mx_spidev_initialize
  *
  * Description:
  *   Called to configure SPI chip select GPIO pins for the PCB Logic board.
@@ -99,7 +99,7 @@ extern "C"
  ************************************************************************************/
 
 #if defined(CONFIG_PIC32MX_SPI2)
-void weak_function pic32mx_spiinitialize(void);
+void weak_function pic32mx_spidev_initialize(void);
 #endif
 
 /************************************************************************************

configs/pic32mx7mmb/src/pic32mx7mmb.h

@@ -120,7 +120,7 @@ extern "C" {
 #endif
 
 /************************************************************************************
- * Name: pic32mx_spiinitialize
+ * Name: pic32mx_spidev_initialize
  *
  * Description:
  *   Called to configure SPI chip select GPIO pins for the Mikroelektronika PIC32MX7
@@ -130,7 +130,7 @@ extern "C" {
 
 #if defined(CONFIG_PIC32MX_SPI1) || defined(CONFIG_PIC32MX_SPI2) || \
     defined(CONFIG_PIC32MX_SPI3) || defined(CONFIG_PIC32MX_SPI4)
-void weak_function pic32mx_spiinitialize(void);
+void weak_function pic32mx_spidev_initialize(void);
 #endif
 
 /************************************************************************************

configs/pic32mz-starterkit/src/pic32mz-starterkit.h

@@ -177,7 +177,7 @@ extern "C"
 #endif
 
 /************************************************************************************
- * Name: pic32mz_spiinitialize
+ * Name: pic32mz_spidev_initialize
  *
  * Description:
  *   Called to configure SPI chip select GPIO pins for the PCB Logic board.
@@ -185,7 +185,7 @@ extern "C"
  ************************************************************************************/
 
 #ifdef CONFIG_PIC32MZ_SPI
-void weak_function pic32mz_spiinitialize(void);
+void weak_function pic32mz_spidev_initialize(void);
 #endif
 
 /************************************************************************************

configs/pic32mz-starterkit/src/pic32mz_boot.c

@@ -71,13 +71,13 @@
 void pic32mz_boardinitialize(void)
 {
   /* Configure SPI chip selects if 1) at least one SPI is enabled, and 2) the weak
-   * function pic32mz_spiinitialize() has been brought into the link.
+   * function pic32mz_spidev_initialize() has been brought into the link.
    */
 
 #ifdef CONFIG_PIC32MZ_SPI
-  if (pic32mz_spiinitialize)
+  if (pic32mz_spidev_initialize)
     {
-      pic32mz_spiinitialize();
+      pic32mz_spidev_initialize();
     }
 #endif
 

configs/pic32mz-starterkit/src/pic32mz_bringup.c

@@ -73,7 +73,7 @@ static int nsh_sdinitialize(void)
 
   /* Get the SPI port */
 
-  spi = up_spiinitialize(PIC32MZ_MMCSDSPIPORTNO);
+  spi = pic32mz_spibus_initialize(PIC32MZ_MMCSDSPIPORTNO);
   if (!spi)
     {
       syslog(LOG_ERR, "ERROR: Failed to initialize SPI port %d\n",

configs/pic32mz-starterkit/src/pic32mz_spi.c

@@ -80,14 +80,14 @@
  ************************************************************************************/
 
 /************************************************************************************
- * Name: pic32mz_spiinitialize
+ * Name: pic32mz_spidev_initialize
  *
  * Description:
  *   Called to configure SPI chip select GPIO pins for the Sure PIC32MZ board.
  *
  ************************************************************************************/
 
-void weak_function pic32mz_spiinitialize(void)
+void weak_function pic32mz_spidev_initialize(void)
 {
   /* Configure the SPI chip select GPIOs */
 
@@ -101,7 +101,7 @@ void weak_function pic32mz_spiinitialize(void)
  *   These external functions must be provided by board-specific logic.  They are
  *   implementations of the select, status, and cmddata methods of the SPI interface
  *   defined by struct spi_ops_s (see include/nuttx/spi/spi.h). All other methods
- *   including up_spiinitialize()) are provided by common PIC32MZ logic.  To use
+ *   including pic32mz_spibus_initialize()) are provided by common PIC32MZ logic.  To use
  *   this common SPI logic on your board:
  *
  *   1. Provide logic in pic32mz_boardinitialize() to configure SPI/SPI chip select
@@ -113,9 +113,9 @@ void weak_function pic32mz_spiinitialize(void)
  *      pic32mz_spiNcmddata() functions in your board-specific logic.  These
  *      functions will perform cmd/data selection operations using GPIOs in the way
  *      your board is configured.
- *   3. Add a call to up_spiinitialize() in your low level application
+ *   3. Add a call to pic32mz_spibus_initialize() in your low level application
  *      initialization logic
- *   4. The handle returned by up_spiinitialize() may then be used to bind the
+ *   4. The handle returned by pic32mz_spibus_initialize() may then be used to bind the
  *      SPI driver to higher level logic (e.g., calling
  *      mmcsd_spislotinitialize(), for example, will bind the SPI driver to
  *      the SPI MMC/SD driver).

configs/sure-pic32mx/src/sure-pic32mx.h

@@ -129,7 +129,7 @@ extern "C" {
 #endif
 
 /************************************************************************************
- * Name: pic32mx_spiinitialize
+ * Name: pic32mx_spidev_initialize
  *
  * Description:
  *   Called to configure SPI chip select GPIO pins for the Sure PIC32MX Logic board.
@@ -137,7 +137,7 @@ extern "C" {
  ************************************************************************************/
 
 #if defined(CONFIG_PIC32MX_SPI2)
-void weak_function pic32mx_spiinitialize(void);
+void weak_function pic32mx_spidev_initialize(void);
 #endif
 
 /************************************************************************************

configs/ubw32/src/pic32_boot.c

@@ -74,13 +74,13 @@
 void pic32mx_boardinitialize(void)
 {
   /* Configure SPI chip selects if 1) at least one SPI is enabled, and 2) the weak
-   * function pic32mx_spiinitialize() has been brought into the link.
+   * function pic32mx_spidev_initialize() has been brought into the link.
    */
 
 #if defined(CONFIG_PIC32MX_SPI1) || defined(CONFIG_PIC32MX_SPI2)
-  if (pic32mx_spiinitialize)
+  if (pic32mx_spidev_initialize)
     {
-      pic32mx_spiinitialize();
+      pic32mx_spidev_initialize();
     }
 #endif
 

configs/ubw32/src/ubw32.h

@@ -70,7 +70,7 @@ extern "C"
 #endif
 
 /************************************************************************************
- * Name: pic32mx_spiinitialize
+ * Name: pic32mx_spidev_initialize
  *
  * Description:
  *   Called to configure SPI chip select GPIO pins for the UBW32 board.
@@ -78,7 +78,7 @@ extern "C"
  ************************************************************************************/
 
 #if defined(CONFIG_PIC32MX_SPI1) || defined(CONFIG_PIC32MX_SPI2)
-void weak_function pic32mx_spiinitialize(void);
+void weak_function pic32mx_spidev_initialize(void);
 #endif
 
 /************************************************************************************