@@ -62,6 +62,8 @@ nuttx/
| | `- README.txt
| |- avr32dev1/
| | `- README.txt
+ | |- bambino-200e/
+ | | `- README.txt
| |- c5471evm/
| | `- README.txt
| |- cc3200-launchpad/
diff --git a/README.txt b/README.txt
index 599200988d2..9915949d2a7 100644
--- a/README.txt
+++ b/README.txt
@@ -1279,6 +1279,8 @@ nuttx/
| | `- README.txt
| |- avr32dev1/
| | `- README.txt
+ | |- bambino-200e/
+ | | `- README.txt
| |- c5471evm/
| | `- README.txt
| |- cc3200-launchpad/
diff --git a/configs/Kconfig b/configs/Kconfig
index 0c5135513a4..21a4becacc1 100644
--- a/configs/Kconfig
+++ b/configs/Kconfig
@@ -318,6 +318,15 @@ config ARCH_BOARD_LPCXPRESSO
Embedded Artists base board with NXP LPCExpresso LPC1768. This board
is based on the NXP LPC1768. The Code Red toolchain is used by default.
+config ARCH_BOARD_BAMBINO_200E
+ bool "Micromint Bambino 200E"
+ depends on ARCH_CHIP_LPC4330FBD144
+ select ARCH_HAVE_LEDS
+ select ARCH_HAVE_BUTTONS
+ select ARCH_HAVE_IRQBUTTONS
+ ---help---
+ Micromint Bambino board. This board is based on the LPC4330FBD144.
+
config ARCH_BOARD_LPC4330_XPLORER
bool "NXG LPC4330-Xplorer"
depends on ARCH_CHIP_LPC4330FET100
@@ -1381,6 +1390,7 @@ config ARCH_BOARD
default "arduino-mega2560" if ARCH_BOARD_ARDUINO_MEGA2560
default "arduino-due" if ARCH_BOARD_ARDUINO_DUE
default "avr32dev1" if ARCH_BOARD_AVR32DEV1
+ default "bambino-200e" if ARCH_BOARD_BAMBINO_200E
default "c5471evm" if ARCH_BOARD_C5471EVM
default "cloudctrl" if ARCH_BOARD_CLOUDCTRL
default "compal_e86" if ARCH_BOARD_COMPALE86
@@ -1555,6 +1565,9 @@ endif
if ARCH_BOARD_AVR32DEV1
source "configs/avr32dev1/Kconfig"
endif
+if ARCH_BOARD_BAMBINO_200E
+source "configs/bambino-200e/Kconfig"
+endif
if ARCH_BOARD_C5471EVM
source "configs/c5471evm/Kconfig"
endif
diff --git a/configs/README.txt b/configs/README.txt
index c95087f42a7..de1342ced27 100644
--- a/configs/README.txt
+++ b/configs/README.txt
@@ -191,6 +191,9 @@ configs/avr32dev1
Atmel website. STATUS: This port is functional but very basic. There
are configurations for NSH and the OS test.
+configs/bambino-200e
+ Micromint Bambino board. This board is based on the LPC4330FBD144.
+
configs/c5471evm
This is a port to the Spectrum Digital C5471 evaluation board. The
TMS320C5471 is a dual core processor from TI with an ARM7TDMI general
diff --git a/configs/bambino-200e/Kconfig b/configs/bambino-200e/Kconfig
new file mode 100644
index 00000000000..3892c96da7c
--- /dev/null
+++ b/configs/bambino-200e/Kconfig
@@ -0,0 +1,7 @@
+#
+# For a description of the syntax of this configuration file,
+# see the file kconfig-language.txt in the NuttX tools repository.
+#
+
+if ARCH_BOARD_BAMBINO_200E
+endif
diff --git a/configs/bambino-200e/README.txt b/configs/bambino-200e/README.txt
new file mode 100644
index 00000000000..d56e44ab92e
--- /dev/null
+++ b/configs/bambino-200e/README.txt
@@ -0,0 +1,453 @@
+README
+======
+
+README for NuttX port to the "Bambino 200E" board from Micromint USA
+featuring the NXP LPC4330FBD144 MCU
+
+Contents
+========
+
+ - Bambino 200E board
+ - Status
+ - Serial Console
+ - FPU
+ - Bambino-200e Configuration Options
+ - Configurations
+
+Bambino 200E board
+=====================
+
+ Memory Map
+ ----------
+
+ Block Start Length
+ Name Address
+ --------------------- ---------- ------
+ RAM 0x10000000 128K
+ RAM2 0x10080000 72K
+ RAMAHB 0x20000000 32K
+ RAMAHB2 0x20008000 16K
+ RAMAHB3 0x2000c000 16K
+ SPIFI flash 0x1e000000 4096K
+
+ GPIO Usage:
+ -----------
+
+ GPIO PIN SIGNAL NAME
+ -------------------------------- ------- --------------
+ gpio3[7] - LED1 101 GPIO3[7]
+ gpio5[5] - LED2 91 GPIO5[5]
+ gpio0[7] - BTN1 96 GPIO0[7]
+
+ Console
+ -------
+
+ The Bambino 200E default console is the UART1 on Gadgeteer Sockets 5 (U).
+
+Status
+======
+
+ Many drivers are working (USB0 Device, Ethernet, etc), but many drivers are
+ missing.
+
+Development Environment
+=======================
+
+ Either Linux or Cygwin on Windows can be used for the development environment.
+ The source has been built only using the GNU toolchain (see below). Other
+ toolchains will likely cause problems. Testing was performed using the Cygwin
+ environment.
+
+Serial Console
+==============
+
+The LPC4330 Xplorer does not have RS-232 drivers or serial connectors on board.
+USART0 and UART1 are available on J8 as follows:
+
+ ------ ------ -----------------------
+ SIGNAL J8 PIN LPC4330FET100 PIN
+ (TFBGA100 package)
+ ------ ------ -----------------------
+ U0_TXD pin 9 F6 P6_4 U0_TXD=Alt 2
+ U0_RXD pin 10 F9 P6_5 U0_RXD=Alt 2
+ U1_TXD pin 13 H8 P1_13 U1_TXD=Alt 1
+ U1_RXD pin 14 J8 P1_14 U1_RXD=Alt 1
+ ------ ------ -----------------------
+
+ GND is available on J8 pin 1
+ 5V is available on J8 pin 2
+ VBAT is available on J8 pin 3
+
+FPU
+===
+
+FPU Configuration Options
+-------------------------
+
+There are two version of the FPU support built into the most NuttX Cortex-M4
+ports. The current LPC43xx port support only one of these options, the "Non-
+Lazy Floating Point Register Save". As a consequence, CONFIG_ARMV7M_CMNVECTOR
+must be defined in *all* LPC43xx configuration files.
+
+1. Lazy Floating Point Register Save.
+
+ This is an untested implementation that saves and restores FPU registers
+ only on context switches. This means: (1) floating point registers are
+ not stored on each context switch and, hence, possibly better interrupt
+ performance. But, (2) since floating point registers are not saved,
+ you cannot use floating point operations within interrupt handlers.
+
+ This logic can be enabled by simply adding the following to your .config
+ file:
+
+ CONFIG_ARCH_FPU=y
+
+2. Non-Lazy Floating Point Register Save
+
+ Mike Smith has contributed an extensive re-write of the ARMv7-M exception
+ handling logic. This includes verified support for the FPU. These changes
+ have not yet been incorporated into the mainline and are still considered
+ experimental. These FPU logic can be enabled with:
+
+ CONFIG_ARCH_FPU=y
+ CONFIG_ARMV7M_CMNVECTOR=y
+
+ You will probably also changes to the ld.script in if this option is selected.
+ This should work:
+
+ -ENTRY(_stext)
+ +ENTRY(__start) /* Treat __start as the anchor for dead code stripping */
+ +EXTERN(_vectors) /* Force the vectors to be included in the output */
+
+CFLAGS
+------
+
+Only the recent toolchains have built-in support for the Cortex-M4 FPU. You will see
+the following lines in each Make.defs file:
+
+ ifeq ($(CONFIG_ARCH_FPU),y)
+ ARCHCPUFLAGS = -mcpu=cortex-m4 -mthumb -march=armv7e-m -mfpu=fpv4-sp-d16 -mfloat-abi=hard
+ else
+ ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
+ endif
+
+Configuration Changes
+---------------------
+
+Below are all of the configuration changes that I had to make to configs/stm3240g-eval/nsh2
+in order to successfully build NuttX using the Atollic toolchain WITH FPU support:
+
+ -CONFIG_ARCH_FPU=n : Enable FPU support
+ +CONFIG_ARCH_FPU=y
+
+ -CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYW=y : Disable the CodeSourcery toolchain
+ +CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYW=n
+
+ -CONFIG_ARMV7M_TOOLCHAIN_ATOLLIC=n : Enable the Atollic toolchains
+ +CONFIG_ARMV7M_TOOLCHAIN_ATOLLIC=y :
+
+ -CONFIG_INTELHEX_BINARY=y : Suppress generation FLASH download formats
+ +CONFIG_INTELHEX_BINARY=n : (Only necessary with the "Lite" version)
+
+ -CONFIG_HAVE_CXX=y : Suppress generation of C++ code
+ +CONFIG_HAVE_CXX=n : (Only necessary with the "Lite" version)
+
+See the section above on Toolchains, NOTE 2, for explanations for some of
+the configuration settings. Some of the usual settings are just not supported
+by the "Lite" version of the Atollic toolchain.
+
+Bambino-200e Configuration Options
+==================================
+
+ CONFIG_ARCH - Identifies the arch/ subdirectory. This should
+ be set to:
+
+ CONFIG_ARCH=arm
+
+ CONFIG_ARCH_family - For use in C code:
+
+ CONFIG_ARCH_ARM=y
+
+ CONFIG_ARCH_architecture - For use in C code:
+
+ CONFIG_ARCH_CORTEXM4=y
+
+ CONFIG_ARCH_CHIP - Identifies the arch/*/chip subdirectory
+
+ CONFIG_ARCH_CHIP=lpc43xx
+
+ CONFIG_ARCH_CHIP_name - For use in C code to identify the exact
+ chip:
+
+ CONFIG_ARCH_CHIP_LPC4330=y
+
+ CONFIG_ARCH_BOARD - Identifies the configs subdirectory and
+ hence, the board that supports the particular chip or SoC.
+
+ CONFIG_ARCH_BOARD=bambino-200e (for the Bambino-200e board)
+
+ CONFIG_ARCH_BOARD_name - For use in C code
+
+ CONFIG_ARCH_BOARD_BAMBINO_200E=y
+
+ CONFIG_ARCH_LOOPSPERMSEC - Must be calibrated for correct operation
+ of delay loops
+
+ CONFIG_ENDIAN_BIG - define if big endian (default is little
+ endian)
+
+ CONFIG_RAM_SIZE - Describes the installed DRAM (CPU SRAM in this case):
+
+ CONFIG_RAM_SIZE=(32*1024) (32Kb)
+
+ There is an additional 32Kb of SRAM in AHB SRAM banks 0 and 1.
+
+ CONFIG_RAM_START - The start address of installed DRAM
+
+ CONFIG_RAM_START=0x10000000
+
+ CONFIG_ARCH_FPU - The LPC43xxx supports a floating point unit (FPU)
+
+ CONFIG_ARCH_FPU=y
+
+ CONFIG_LPC43_BOOT_xxx - The startup code needs to know if the code is running
+ from internal FLASH, external FLASH, SPIFI, or SRAM in order to
+ initialize properly. Note that a boot device is not specified for
+ cases where the code is copied into SRAM; those cases are all covered
+ by CONFIG_LPC43_BOOT_SRAM.
+
+ CONFIG_LPC43_BOOT_SRAM=y : Running from SRAM (0x1000:0000)
+ CONFIG_LPC43_BOOT_SPIFI=y : Running from QuadFLASH (0x1400:0000)
+ CONFIG_LPC43_BOOT_FLASHA=y : Running in internal FLASHA (0x1a00:0000)
+ CONFIG_LPC43_BOOT_FLASHB=y : Running in internal FLASHA (0x1b00:0000)
+ CONFIG_LPC43_BOOT_CS0FLASH=y : Running in external FLASH CS0 (0x1c00:0000)
+ CONFIG_LPC43_BOOT_CS1FLASH=y : Running in external FLASH CS1 (0x1d00:0000)
+ CONFIG_LPC43_BOOT_CS2FLASH=y : Running in external FLASH CS2 (0x1e00:0000)
+ CONFIG_LPC43_BOOT_CS3FLASH=y : Running in external FLASH CS3 (0x1f00:0000)
+
+ CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to boards that
+ have LEDs
+
+ CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt
+ stack. If defined, this symbol is the size of the interrupt
+ stack in bytes. If not defined, the user task stacks will be
+ used during interrupt handling.
+
+ CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions
+
+ CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to board architecture.
+
+ CONFIG_ARCH_CALIBRATION - Enables some build in instrumentation that
+ cause a 100 second delay during boot-up. This 100 second delay
+ serves no purpose other than it allows you to calibratre
+ CONFIG_ARCH_LOOPSPERMSEC. You simply use a stop watch to measure
+ the 100 second delay then adjust CONFIG_ARCH_LOOPSPERMSEC until
+ the delay actually is 100 seconds.
+
+ Individual subsystems can be enabled:
+
+ CONFIG_LPC43_ADC0=y
+ CONFIG_LPC43_ADC1=y
+ CONFIG_LPC43_ATIMER=y
+ CONFIG_LPC43_CAN1=y
+ CONFIG_LPC43_CAN2=y
+ CONFIG_LPC43_DAC=y
+ CONFIG_LPC43_EMC=y
+ CONFIG_LPC43_ETHERNET=y
+ CONFIG_LPC43_EVNTMNTR=y
+ CONFIG_LPC43_GPDMA=y
+ CONFIG_LPC43_I2C0=y
+ CONFIG_LPC43_I2C1=y
+ CONFIG_LPC43_I2S0=y
+ CONFIG_LPC43_I2S1=y
+ CONFIG_LPC43_LCD=y
+ CONFIG_LPC43_MCPWM=y
+ CONFIG_LPC43_QEI=y
+ CONFIG_LPC43_RIT=y
+ CONFIG_LPC43_RTC=y
+ CONFIG_LPC43_SCT=y
+ CONFIG_LPC43_SDMMC=y
+ CONFIG_LPC43_SPI=y
+ CONFIG_LPC43_SPIFI=y
+ CONFIG_LPC43_SSP0=y
+ CONFIG_LPC43_SSP1=y
+ CONFIG_LPC43_TMR0=y
+ CONFIG_LPC43_TMR1=y
+ CONFIG_LPC43_TMR2=y
+ CONFIG_LPC43_TMR3=y
+ CONFIG_LPC43_USART0=y
+ CONFIG_LPC43_UART1=y
+ CONFIG_LPC43_USART2=y
+ CONFIG_LPC43_USART3=y
+ CONFIG_LPC43_USB0=y
+ CONFIG_LPC43_USB1=y
+ CONFIG_LPC43_USB1_ULPI=y
+ CONFIG_LPC43_WWDT=y
+
+ LPC43xx specific U[S]ART device driver settings
+
+ CONFIG_U[S]ARTn_SERIAL_CONSOLE - selects the UARTn for the
+ console and ttys0 (default is the USART0).
+ CONFIG_U[S]ARTn_RXBUFSIZE - Characters are buffered as received.
+ This specific the size of the receive buffer
+ CONFIG_U[S]ARTn_TXBUFSIZE - Characters are buffered before
+ being sent. This specific the size of the transmit buffer
+ CONFIG_U[S]ARTn_BAUD - The configure BAUD of the UART. Must be
+ CONFIG_U[S]ARTn_BITS - The number of bits. Must be either 7 or 8.
+ CONFIG_U[S]ARTn_PARTIY - 0=no parity, 1=odd parity, 2=even parity
+ CONFIG_U[S]ARTn_2STOP - Two stop bits
+
+ CONFIG_USARTn_RS485MODE - Support LPC43xx USART0,2,3 RS485 mode
+ ioctls (TIOCSRS485 and TIOCGRS485) to enable and disable
+ RS-485 mode.
+
+ LPC43xx specific CAN device driver settings. These settings all
+ require CONFIG_CAN:
+
+ CONFIG_CAN_EXTID - Enables support for the 29-bit extended ID. Default
+ Standard 11-bit IDs.
+ CONFIG_CAN1_BAUD - CAN1 BAUD rate. Required if CONFIG_LPC43_CAN1 is defined.
+ CONFIG_CAN2_BAUD - CAN1 BAUD rate. Required if CONFIG_LPC43_CAN2 is defined.
+ CONFIG_CAN1_DIVISOR - CAN1 is clocked at CCLK divided by this number.
+ (the CCLK frequency is divided by this number to get the CAN clock).
+ Options = {1,2,4,6}. Default: 4.
+ CONFIG_CAN2_DIVISOR - CAN2 is clocked at CCLK divided by this number.
+ (the CCLK frequency is divided by this number to get the CAN clock).
+ Options = {1,2,4,6}. Default: 4.
+ CONFIG_CAN_TSEG1 - The number of CAN time quanta in segment 1. Default: 6
+ CONFIG_CAN_TSEG2 = the number of CAN time quanta in segment 2. Default: 7
+
+ LPC43xx specific PHY/Ethernet device driver settings. These setting
+ also require CONFIG_NET and CONFIG_LPC43_ETHERNET.
+
+ CONFIG_ETH0_PHY_KS8721 - Selects Micrel KS8721 PHY
+ CONFIG_PHY_AUTONEG - Enable auto-negotion
+ CONFIG_PHY_SPEED100 - Select 100Mbit vs. 10Mbit speed.
+ CONFIG_PHY_FDUPLEX - Select full (vs. half) duplex
+
+ CONFIG_NET_EMACRAM_SIZE - Size of EMAC RAM. Default: 16Kb
+ CONFIG_NET_NTXDESC - Configured number of Tx descriptors. Default: 18
+ CONFIG_NET_NRXDESC - Configured number of Rx descriptors. Default: 18
+ CONFIG_NET_WOL - Enable Wake-up on Lan (not fully implemented).
+ CONFIG_NET_REGDEBUG - Enabled low level register debug. Also needs
+ CONFIG_DEBUG_FEATURES.
+ CONFIG_NET_DUMPPACKET - Dump all received and transmitted packets.
+ Also needs CONFIG_DEBUG_FEATURES.
+ CONFIG_NET_HASH - Enable receipt of near-perfect match frames.
+
+ LPC43xx USB Device Configuration
+
+ CONFIG_LPC43_USBDEV_FRAME_INTERRUPT
+ Handle USB Start-Of-Frame events.
+ Enable reading SOF from interrupt handler vs. simply reading on demand.
+ Probably a bad idea... Unless there is some issue with sampling the SOF
+ from hardware asynchronously.
+ CONFIG_LPC43_USBDEV_EPFAST_INTERRUPT
+ Enable high priority interrupts. I have no idea why you might want to
+ do that
+ CONFIG_LPC43_USBDEV_NDMADESCRIPTORS
+ Number of DMA descriptors to allocate in SRAM.
+ CONFIG_LPC43_USBDEV_DMA
+ Enable lpc17xx-specific DMA support
+ CONFIG_LPC43_USBDEV_NOVBUS
+ Define if the hardware implementation does not support the VBUS signal
+ CONFIG_LPC43_USBDEV_NOLED
+ Define if the hardware implementation does not support the LED output
+
+ LPC43xx USB Host Configuration
+
+ CONFIG_USBHOST_OHCIRAM_SIZE
+ Total size of OHCI RAM (in AHB SRAM Bank 1)
+ CONFIG_USBHOST_NEDS
+ Number of endpoint descriptors
+ CONFIG_USBHOST_NTDS
+ Number of transfer descriptors
+ CONFIG_USBHOST_TDBUFFERS
+ Number of transfer descriptor buffers
+ CONFIG_USBHOST_TDBUFSIZE
+ Size of one transfer descriptor buffer
+ CONFIG_USBHOST_IOBUFSIZE
+ Size of one end-user I/O buffer. This can be zero if the
+ application can guarantee that all end-user I/O buffers
+ reside in AHB SRAM.
+
+Configurations
+==============
+
+Each Bambino-200e configuration is maintained in a sub-directory and can be selected
+as follow:
+
+ cd tools
+ ./configure.sh bambino-200e/
+ cd -
+ . ./setenv.sh
+
+Where is one of the following:
+
+ nsh:
+ ----
+ This configuration is the NuttShell (NSH) example at examples/nsh/.
+
+ NOTES:
+
+ 1. This configuration uses the mconf-based configuration tool. To
+ change this configurations using that tool, you should:
+
+ a. Build and install the kconfig-mconf tool. See nuttx/README.txt
+ see additional README.txt files in the NuttX tools repository.
+
+ b. Execute 'make menuconfig' in nuttx/ in order to start the
+ reconfiguration process.
+
+ 2. By default, this project assumes that you are executing directly from
+ SRAM.
+
+ CONFIG_LPC43_BOOT_SRAM=y : Executing in SRAM
+ CONFIG_ARMV7M_TOOLCHAIN_CODEREDW=y : Code Red under Windows
+
+ 3. To execute from SPIFI, you would need to set:
+
+ CONFIG_LPC43_BOOT_SPIFI=y : Executing from SPIFI
+ CONFIG_RAM_SIZE=(128*1024) : SRAM Bank0 size
+ CONFIG_RAM_START=0x10000000 : SRAM Bank0 base address
+ CONFIG_SPIFI_OFFSET=(512*1024) : SPIFI file system offset
+
+ CONFIG_MM_REGIONS should also be increased if you want to other SRAM banks
+ to the memory pool.
+
+ 4. This configuration an also be used create a block device on the SPIFI
+ FLASH. CONFIG_LPC43_SPIFI=y must also be defined to enable SPIFI setup
+ support:
+
+ SPIFI device geometry:
+
+ CONFIG_SPIFI_OFFSET - Offset the beginning of the block driver this many
+ bytes into the device address space. This offset must be an exact
+ multiple of the erase block size (CONFIG_SPIFI_BLKSIZE). Default 0.
+ CONFIG_SPIFI_BLKSIZE - The size of one device erase block. If not defined
+ then the driver will try to determine the correct erase block size by
+ examining that data returned from spifi_initialize (which sometimes
+ seems bad).
+
+ Other SPIFI options
+
+ CONFIG_SPIFI_SECTOR512 - If defined, then the driver will report a more
+ FAT friendly 512 byte sector size and will manage the read-modify-write
+ operations on the larger erase block.
+ CONFIG_SPIFI_READONLY - Define to support only read-only operations.
+ CONFIG_SPIFI_LIBRARY - Don't use the LPC43xx ROM routines but, instead,
+ use an external library implementation of the SPIFI interface.
+ CONFIG_SPIFI_VERIFY - Verify all spifi_program() operations by reading
+ from the SPI address space after each write.
+ CONFIG_DEBUG_SPIFI_DUMP - Debug option to dump read/write buffers. You
+ probably do not want to enable this unless you want to dig through a
+ *lot* of debug output! Also required CONFIG_DEBUG_FEATURES, CONFIG_DEBUG_INFO,
+ and CONFIG_DEBUG_FS,
+
+ 5. In my experience, there were some missing function pointers in the LPC43xx
+ SPIFI ROM routines and the SPIFI configuration could only be built with
+ CONFIG_SPIFI_LIBRARY=y. The SPIFI library is proprietary and cannot be
+ provided within NuttX open source repository; SPIFI library binaries can
+ be found on the lpcware.com website. In this build sceneario, you must
+ also provide the patch to the external SPIFI library be defining the make
+ variable EXTRA_LIBS in the top-level Make.defs file. Good luck!
diff --git a/configs/bambino-200e/include/board.h b/configs/bambino-200e/include/board.h
new file mode 100644
index 00000000000..d84320a8d3b
--- /dev/null
+++ b/configs/bambino-200e/include/board.h
@@ -0,0 +1,360 @@
+/****************************************************************************
+ * configs/bambino-200e/include/board.h
+ *
+ * Copyright (C) 2016 Gregory Nutt. All rights reserved.
+ * Author: Gregory Nutt
+ * Alan Carvalho de Assis acassis@gmail.com [nuttx]
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ * used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+#ifndef __CONFIG_BAMBINO_200E_INCLUDE_BOARD_H
+#define __CONFIG_BAMBINO_200E_INCLUDE_BOARD_H
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include
+#include
+
+#if defined(CONFIG_ARCH_IRQBUTTONS) && defined(CONFIG_LPC43_GPIO_IRQ)
+# include
+#endif
+
+/****************************************************************************
+ * Pre-processor Definitions
+ ****************************************************************************/
+
+/* Clocking ****************************************************************/
+/* NOTE: The following definitions require lpc43_cgu.h. It is not included
+ * here because the including C file may not have that file in its include
+ * path.
+ *
+ * The Xplorer board has four crystals on board:
+ *
+ * Y1 - RTC 32.768 MHz oscillator input,
+ * Y2 - 24.576 MHz input to the UDA 1380 audio codec,
+ * Y3 - 12.000 MHz LPC43xx crystal oscillator input
+ * Y4 - 50 MHz input for Ethernet
+ */
+
+#define BOARD_XTAL_FREQUENCY (12000000) /* XTAL oscillator frequency (Y3) */
+#define BOARD_RTCCLK_FREQUENCY (32768) /* RTC oscillator frequency (Y1) */
+#define BOARD_INTRCOSC_FREQUENCY (4000000) /* Internal RC oscillator frequency */
+
+/* Integer and direct modes are supported:
+ *
+ * In integer mode (Fclkout < 156000000):
+ * Fclkin = BOARD_XTAL_FREQUENCY
+ * Fclkout = Msel * FClkin / Nsel
+ * Fcco = 2 * Psel * Fclkout
+ * In direct mode (Fclkout > 156000000):
+ * Fclkin = BOARD_XTAL_FREQUENCY
+ * Fclkout = Msel * FClkin / Nsel
+ * Fcco = Fclkout
+ */
+
+#ifdef CONFIG_LPC43_72MHz
+
+/* NOTE: At 72MHz, the calibrated value of CONFIG_BOARD_LOOPSPERMSEC was
+ * determined to be:
+ *
+ * CONFIG_BOARD_LOOPSPERMSEC=7191
+ *
+ * executing from SRAM.
+ */
+
+/* Final clocking (Integer mode with no ramp-up)
+ *
+ * Fclkout = 6 * 12MHz / 1 = 72MHz
+ * Fcco = 2 * 2 * 72MHz = 216MHz
+ */
+
+# define BOARD_PLL_MSEL (6) /* Msel = 6 */
+# define BOARD_PLL_NSEL (1) /* Nsel = 1 */
+# define BOARD_PLL_PSEL (2) /* Psel = 2 */
+
+# define BOARD_FCLKOUT_FREQUENCY (72000000) /* 6 * 12,000,000 / 1 */
+# define BOARD_FCCO_FREQUENCY (244000000) /* 2 * 2 * Fclkout */
+
+#else
+
+/* NOTE: At 72MHz, the calibrated value of CONFIG_BOARD_LOOPSPERMSEC was
+ * determined to be:
+ *
+ * CONFIG_BOARD_LOOPSPERMSEC=18535
+ *
+ * executing from SRAM.
+ */
+
+/* Intermediate ramp-up clocking (Integer mode). If BOARD_PLL_RAMP_MSEL
+ * is not defined, there will be no ramp-up.
+ *
+ * Fclkout = 9 * 12MHz / 1 = 108MHz
+ * Fcco = 2 * 1 * 108MHz = 216MHz
+ */
+
+# define BOARD_PLL_RAMP_MSEL (9) /* Msel = 9 */
+# define BOARD_PLL_RAMP_NSEL (1) /* Nsel = 1 */
+# define BOARD_PLL_RAMP_PSEL (1) /* Psel = 1 */
+
+# define BOARD_RAMP_FCLKOUT (108000000) /* 9 * 12,000,000 / 1 */
+# define BOARD_RAMP_FCCO (216000000) /* 2 * 1 * Fclkout */
+
+/* Final clocking (Direct mode).
+ *
+ * Fclkout = 17 * 12MHz / 1 = 204MHz
+ * Fcco = Fclockout = 204MHz
+ */
+
+# define BOARD_PLL_MSEL (17) /* Msel = 17 */
+# define BOARD_PLL_NSEL (1) /* Nsel = 1 */
+
+# define BOARD_FCLKOUT_FREQUENCY (204000000) /* 17 * 12,000,000 / 1 */
+# define BOARD_FCCO_FREQUENCY (204000000) /* Fclockout */
+
+#endif
+
+/* This is the clock setup we configure for:
+ *
+ * SYSCLK = BOARD_OSCCLK_FREQUENCY = 12MHz -> Select Main oscillator for source
+ * PLL0CLK = (2 * 20 * SYSCLK) / 1 = 480MHz -> PLL0 multipler=20, pre-divider=1
+ * CCLCK = 480MHz / 6 = 80MHz -> CCLK divider = 6
+ */
+
+#define LPC43_CCLK BOARD_FCLKOUT_FREQUENCY
+
+/* APB Clocking */
+
+#if defined(CONFIG_LPC43_BUS) || defined(CONFIG_LPC43_MCPWM) || \
+ defined(CONFIG_LPC43_I2C0) || defined(CONFIG_LPC43_I2S0) || \
+ defined(CONFIG_LPC43_I2S1) || defined(CONFIG_LPC43_CAN1)
+# define BOARD_ABP1_CLKSRC BASE_APB_CLKSEL_XTAL
+# define BOARD_ABP1_FREQUENCY BOARD_XTAL_FREQUENCY
+#endif
+
+
+#if defined(CONFIG_LPC43_BUS) || defined(CONFIG_LPC43_I2C1) || \
+ defined(CONFIG_LPC43_DAC) || defined(CONFIG_LPC43_ADC0) || \
+ defined(CONFIG_LPC43_ADC1) || defined(CONFIG_LPC43_CAN0)
+# define BOARD_ABP3_CLKSRC BASE_APB_CLKSEL_XTAL
+# define BOARD_ABP3_FREQUENCY BOARD_XTAL_FREQUENCY
+#endif
+
+/* SSP Clocking */
+
+#define BOARD_IDIVA_DIVIDER (2)
+#define BOARD_IDIVA_CLKSRC IDIVA_CLKSEL_PLL1
+#define BOARD_IDIVA_FREQUENCY (BOARD_FCLKOUT_FREQUENCY/BOARD_IDIVA_DIVIDER)
+
+#define BOARD_SSP0_CLKSRC BASE_SSP0_CLKSEL_IDIVA
+#define BOARD_SSP0_BASEFREQ BOARD_IDIVA_FREQUENCY
+
+#define BOARD_SSP1_CLKSRC BASE_SSP1_CLKSEL_IDIVA
+#define BOARD_SSP1_BASEFREQ BOARD_IDIVA_FREQUENCY
+
+/* USB0 ********************************************************************/
+/* Settings needed in lpc43_cpu.c */
+
+#define BOARD_USB0_CLKSRC PLL0USB_CLKSEL_XTAL
+#define BOARD_USB0_MDIV 0x06167ffa /* Table 149 datsheet, valid for 12Mhz Fclkin */
+#define BOARD_USB0_NP_DIV 0x00302062 /* Table 149 datsheet, valid for 12Mhz Fclkin */
+
+/* SPIFI clocking **********************************************************/
+/* The SPIFI will receive clocking from a divider per the settings provided
+ * in this file. The NuttX code will configure PLL1 as the input clock
+ * for the selected divider
+ */
+
+#undef BOARD_SPIFI_PLL1 /* No division */
+#undef BOARD_SPIFI_DIVA /* Supports division by 1-4 */
+#undef BOARD_SPIFI_DIVB /* Supports division by 1-16 */
+#undef BOARD_SPIFI_DIVC /* Supports division by 1-16 */
+#undef BOARD_SPIFI_DIVD /* Supports division by 1-16 */
+#undef BOARD_SPIFI_DIVE /* Supports division by 1-256 */
+
+#if BOARD_FCLKOUT_FREQUENCY < 20000000
+# define BOARD_SPIFI_PLL1 1 /* Use PLL1 directly */
+#else
+# define BOARD_SPIFI_DIVB 1 /* Use IDIVB */
+#endif
+
+
+/* We need to configure the divider so that its output is as close to the
+ * desired SCLK value. The peak data transfer rate will be about half of
+ * this frequency in bytes per second.
+ */
+
+#if BOARD_FCLKOUT_FREQUENCY < 20000000
+# define BOARD_SPIFI_FREQUENCY BOARD_FCLKOUT_FREQUENCY /* 72Mhz? */
+#else
+# define BOARD_SPIFI_DIVIDER (14) /* 204MHz / 14 = 14.57MHz */
+# define BOARD_SPIFI_FREQUENCY (102000000) /* 204MHz / 14 = 14.57MHz */
+#endif
+
+/* UART clocking ***********************************************************/
+/* Configure all U[S]ARTs to use the XTAL input frequency */
+
+#define BOARD_USART0_CLKSRC BASE_USART0_CLKSEL_XTAL
+#define BOARD_USART0_BASEFREQ BOARD_XTAL_FREQUENCY
+
+#define BOARD_UART1_CLKSRC BASE_UART1_CLKSEL_XTAL
+#define BOARD_UART1_BASEFREQ BOARD_XTAL_FREQUENCY
+
+#define BOARD_USART2_CLKSRC BASE_USART2_CLKSEL_XTAL
+#define BOARD_USART2_BASEFREQ BOARD_XTAL_FREQUENCY
+
+#define BOARD_USART3_CLKSRC BASE_USART3_CLKSEL_XTAL
+#define BOARD_USART3_BASEFREQ BOARD_XTAL_FREQUENCY
+
+/* LED definitions *********************************************************/
+/* The Bambino 200E has 2 user-controllable LEDs labeled LED1 and LED2 in the
+ * schematic and on bus referred to has GPIO3[7] and GPIO5[5], respectively.
+ *
+ * LED1 GPIO3[7]
+ * LED2 GPIO5[5]
+ *
+ * LEDs are pulled high to a low output illuminates the LED.
+ *
+ * LED index values for use with board_userled()
+ */
+
+#define BOARD_LED1 0
+#define BOARD_LED2 1
+#define BOARD_NLEDS 2
+
+/* LED bits for use with board_userled_all() */
+
+#define BOARD_LED1_BIT (1 << BOARD_LED1)
+#define BOARD_LED2_BIT (1 << BOARD_LED2)
+
+/* If CONFIG_ARCH_LEDS is defined, the LEDs will be controlled as follows
+ * for NuttX debug functionality (where NC means "No Change"). If
+ * CONFIG_ARCH_LEDS is not defined, then the LEDs are completely under
+ * control of the application. The following interfaces are then available
+ * for application control of the LEDs:
+ *
+ * void board_userled_initialize(void);
+ * void board_userled(int led, bool ledon);
+ * void board_userled_all(uint8_t ledset);
+ */
+ /* ON OFF */
+ /* LED1 LED2 LED1 LED2 */
+#define LED_STARTED 0 /* OFF OFF - - */
+#define LED_HEAPALLOCATE 1 /* ON OFF - - */
+#define LED_IRQSENABLED 1 /* ON OFF - - */
+#define LED_STACKCREATED 1 /* ON OFF - - */
+#define LED_INIRQ 2 /* NC ON NC OFF */
+#define LED_SIGNAL 2 /* NC ON NC OFF */
+#define LED_ASSERTION 2 /* NC ON NC OFF */
+#define LED_PANIC 2 /* NC ON NC OFF */
+
+/* UART Pins ****************************************************************/
+/* The Bambino 200E does not have RS-232 drivers or serial connectors on
+ * board. UART1 and USART2 are availables on Socket 5 and 10, recpectively:
+ *
+ * ------ ---------- -----------------------
+ * SIGNAL Socket/Pin LPC4330FBD144 PIN
+ * ------ ---------- -----------------------
+ * U1_TXD s:5 / p:4 63 P5_6 U1_TXD=Alt 1
+ * U1_RXD s:5 / p:5 61 P1_14 U1_RXD=Alt 1
+ * U2_TXD s:10 / p:4 104 P2_10 U2_TXD=Alt 1
+ * U2_RXD s:10 / p:5 105 P2_11 U2_RXD=Alt 1
+ * ------ ---------- -----------------------
+ *
+ * The following definitions must be provided so that the LPC43 serial
+ * driver can set up the U[S]ART for the serial console properly (see the
+ * file arch/arc/src/lpc43xx/lpc4310203050_pinconf.h for more info).
+ */
+
+#define PINCONF_U0_TXD PINCONF_U0_TXD_3
+#define PINCONF_U0_RXD PINCONF_U0_RXD_3
+#define PINCONF_U0_DIR PINCONF_U0_DIR_3
+
+#define PINCONF_U1_TXD PINCONF_U1_TXD_5
+#define PINCONF_U1_RXD PINCONF_U1_RXD_1
+
+#define PINCONF_U2_TXD PINCONF_U2_TXD_2
+#define PINCONF_U2_RXD PINCONF_U2_RXD_2
+#define PINCONF_U2_DIR PINCONF_U2_DIR_2
+
+#define PINCONF_U3_TXD PINCONF_U3_TXD_2
+#define PINCONF_U3_RXD PINCONF_U3_RXD_2
+#define PINCONF_U3_DIR PINCONF_U3_DIR_2
+
+/* Ethernet */
+
+#define PINCONF_ENET_RX_DV PINCONF_ENET_RX_DV_2
+#define PINCONF_ENET_RESET PINCONF_GPIO0p4
+#define GPIO_ENET_RESET (GPIO_MODE_OUTPUT | GPIO_VALUE_ONE | GPIO_PORT0 | GPIO_PIN4)
+#define PINCONF_ENET_MDC PINCONF_ENET_MDC_3
+
+/****************************************************************************
+ * Public Types
+ ****************************************************************************/
+
+#ifndef __ASSEMBLY__
+
+/****************************************************************************
+ * Public Data
+ ****************************************************************************/
+
+#undef EXTERN
+#if defined(__cplusplus)
+#define EXTERN extern "C"
+extern "C"
+{
+#else
+#define EXTERN extern
+#endif
+
+/****************************************************************************
+ * Public Function Prototypes
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: lpc43_boardinitialize
+ *
+ * Description:
+ * All LPC43xx architectures must provide the following entry point. This entry point
+ * is called early in the intitialization -- after all memory has been configured
+ * and mapped but before any devices have been initialized.
+ *
+ ****************************************************************************/
+
+void lpc43_boardinitialize(void);
+
+#undef EXTERN
+#if defined(__cplusplus)
+}
+#endif
+
+#endif /* __ASSEMBLY__ */
+#endif /* __CONFIG_BAMBINO_200E_INCLUDE_BOARD_H */
diff --git a/configs/bambino-200e/nsh/Make.defs b/configs/bambino-200e/nsh/Make.defs
new file mode 100644
index 00000000000..105969c6b12
--- /dev/null
+++ b/configs/bambino-200e/nsh/Make.defs
@@ -0,0 +1,132 @@
+############################################################################
+# configs/bambino-200e/nsh/Make.defs
+#
+# Copyright (C) 2016 Gregory Nutt. All rights reserved.
+# Author: Gregory Nutt
+# Alan Carvalho de Assis acassis@gmail.com [nuttx]
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+# used to endorse or promote products derived from this software
+# without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+
+include ${TOPDIR}/.config
+include ${TOPDIR}/tools/Config.mk
+include ${TOPDIR}/arch/arm/src/armv7-m/Toolchain.defs
+
+# Setup for the kind of memory that we are executing from
+
+ifeq ($(CONFIG_LPC43_BOOT_SRAM),y)
+ LDSCRIPT = ramconfig.ld
+endif
+ifeq ($(CONFIG_LPC43_BOOT_SPIFI),y)
+ LDSCRIPT = spificonfig.ld
+endif
+ifeq ($(CONFIG_LPC43_BOOT_FLASHA),y)
+ LDSCRIPT = flashaconfig.ld
+endif
+ifeq ($(CONFIG_LPC43_BOOT_FLASHB),y)
+ LDSCRIPT = flashaconfig.ld
+endif
+ifeq ($(CONFIG_LPC43_BOOT_CS0FLASH),y)
+ LDSCRIPT = cs0flash.ld
+endif
+
+# Setup for Windows vs Linux/Cygwin/OSX environments
+
+ifeq ($(WINTOOL),y)
+ # Windows-native toolchains
+ DIRLINK = $(TOPDIR)/tools/copydir.sh
+ DIRUNLINK = $(TOPDIR)/tools/unlink.sh
+ MKDEP = $(TOPDIR)/tools/mkwindeps.sh
+ ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
+ ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
+ ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}"
+else
+ # Linux/Cygwin-native toolchain
+ MKDEP = $(TOPDIR)/tools/mkdeps$(HOSTEXEEXT)
+ ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
+ ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
+ ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)
+endif
+
+CC = $(CROSSDEV)gcc
+CXX = $(CROSSDEV)g++
+CPP = $(CROSSDEV)gcc -E
+LD = $(CROSSDEV)ld
+AR = $(ARCROSSDEV)ar rcs
+NM = $(ARCROSSDEV)nm
+OBJCOPY = $(CROSSDEV)objcopy
+OBJDUMP = $(CROSSDEV)objdump
+
+ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'}
+ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1}
+
+ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
+ ARCHOPTIMIZATION = -g
+endif
+
+ifneq ($(CONFIG_DEBUG_NOOPT),y)
+ ARCHOPTIMIZATION += $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer
+endif
+
+ARCHCFLAGS = -fno-builtin
+ARCHCXXFLAGS = -fno-builtin -fno-exceptions -fcheck-new -fno-rtti
+ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow -Wundef
+ARCHWARNINGSXX = -Wall -Wshadow -Wundef
+ARCHDEFINES =
+ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10
+
+CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
+CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
+CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
+CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
+CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES)
+AFLAGS = $(CFLAGS) -D__ASSEMBLY__
+
+NXFLATLDFLAGS1 = -r -d -warn-common
+NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat-pcrel.ld -no-check-sections
+LDNXFLATFLAGS = -e main -s 2048
+
+ASMEXT = .S
+OBJEXT = .o
+LIBEXT = .a
+EXEEXT =
+
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
+ LDFLAGS += -nostartfiles -nodefaultlibs
+endif
+ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
+ LDFLAGS += -g
+endif
+
+
+HOSTCC = gcc
+HOSTINCLUDES = -I.
+HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -Wundef -g -pipe
+HOSTLDFLAGS =
+
diff --git a/configs/bambino-200e/nsh/defconfig b/configs/bambino-200e/nsh/defconfig
new file mode 100644
index 00000000000..1593440d4b6
--- /dev/null
+++ b/configs/bambino-200e/nsh/defconfig
@@ -0,0 +1,989 @@
+#
+# Automatically generated file; DO NOT EDIT.
+# Nuttx/ Configuration
+#
+
+#
+# Build Setup
+#
+# CONFIG_EXPERIMENTAL is not set
+# CONFIG_DEFAULT_SMALL is not set
+CONFIG_HOST_LINUX=y
+# CONFIG_HOST_OSX is not set
+# CONFIG_HOST_WINDOWS is not set
+# CONFIG_HOST_OTHER is not set
+
+#
+# Build Configuration
+#
+# CONFIG_APPS_DIR="../apps"
+CONFIG_BUILD_FLAT=y
+# CONFIG_BUILD_2PASS is not set
+
+#
+# Binary Output Formats
+#
+# CONFIG_RRLOAD_BINARY is not set
+# CONFIG_INTELHEX_BINARY is not set
+# CONFIG_MOTOROLA_SREC is not set
+CONFIG_RAW_BINARY=y
+# CONFIG_UBOOT_UIMAGE is not set
+
+#
+# Customize Header Files
+#
+# CONFIG_ARCH_STDINT_H is not set
+# CONFIG_ARCH_STDBOOL_H is not set
+# CONFIG_ARCH_MATH_H is not set
+# CONFIG_ARCH_FLOAT_H is not set
+CONFIG_ARCH_STDARG_H=y
+# CONFIG_ARCH_DEBUG_H is not set
+
+#
+# Debug Options
+#
+CONFIG_DEBUG_ALERT=y
+# CONFIG_DEBUG_FEATURES is not set
+CONFIG_ARCH_HAVE_STACKCHECK=y
+# CONFIG_STACK_COLORATION is not set
+# CONFIG_ARCH_HAVE_HEAPCHECK is not set
+CONFIG_DEBUG_SYMBOLS=y
+CONFIG_ARCH_HAVE_CUSTOMOPT=y
+CONFIG_DEBUG_NOOPT=y
+# CONFIG_DEBUG_CUSTOMOPT is not set
+# CONFIG_DEBUG_FULLOPT is not set
+
+#
+# System Type
+#
+CONFIG_ARCH_ARM=y
+# CONFIG_ARCH_AVR is not set
+# CONFIG_ARCH_HC is not set
+# CONFIG_ARCH_MIPS is not set
+# CONFIG_ARCH_RGMP is not set
+# CONFIG_ARCH_RENESAS is not set
+# CONFIG_ARCH_RISCV is not set
+# CONFIG_ARCH_SIM is not set
+# CONFIG_ARCH_X86 is not set
+# CONFIG_ARCH_Z16 is not set
+# CONFIG_ARCH_Z80 is not set
+CONFIG_ARCH="arm"
+
+#
+# ARM Options
+#
+# CONFIG_ARCH_CHIP_A1X is not set
+# CONFIG_ARCH_CHIP_C5471 is not set
+# CONFIG_ARCH_CHIP_CALYPSO is not set
+# CONFIG_ARCH_CHIP_DM320 is not set
+# CONFIG_ARCH_CHIP_EFM32 is not set
+# CONFIG_ARCH_CHIP_IMX1 is not set
+# CONFIG_ARCH_CHIP_IMX6 is not set
+# CONFIG_ARCH_CHIP_KINETIS is not set
+# CONFIG_ARCH_CHIP_KL is not set
+# CONFIG_ARCH_CHIP_LM is not set
+# CONFIG_ARCH_CHIP_TIVA is not set
+# CONFIG_ARCH_CHIP_LPC11XX is not set
+# CONFIG_ARCH_CHIP_LPC17XX is not set
+# CONFIG_ARCH_CHIP_LPC214X is not set
+# CONFIG_ARCH_CHIP_LPC2378 is not set
+# CONFIG_ARCH_CHIP_LPC31XX is not set
+CONFIG_ARCH_CHIP_LPC43XX=y
+# CONFIG_ARCH_CHIP_NUC1XX is not set
+# CONFIG_ARCH_CHIP_SAMA5 is not set
+# CONFIG_ARCH_CHIP_SAMD is not set
+# CONFIG_ARCH_CHIP_SAML is not set
+# CONFIG_ARCH_CHIP_SAM34 is not set
+# CONFIG_ARCH_CHIP_SAMV7 is not set
+# CONFIG_ARCH_CHIP_STM32 is not set
+# CONFIG_ARCH_CHIP_STM32F7 is not set
+# CONFIG_ARCH_CHIP_STM32L4 is not set
+# CONFIG_ARCH_CHIP_STR71X is not set
+# CONFIG_ARCH_CHIP_TMS570 is not set
+# CONFIG_ARCH_CHIP_MOXART is not set
+# CONFIG_ARCH_ARM7TDMI is not set
+# CONFIG_ARCH_ARM926EJS is not set
+# CONFIG_ARCH_ARM920T is not set
+# CONFIG_ARCH_CORTEXM0 is not set
+# CONFIG_ARCH_CORTEXM3 is not set
+CONFIG_ARCH_CORTEXM4=y
+# CONFIG_ARCH_CORTEXM7 is not set
+# CONFIG_ARCH_CORTEXA5 is not set
+# CONFIG_ARCH_CORTEXA8 is not set
+# CONFIG_ARCH_CORTEXA9 is not set
+# CONFIG_ARCH_CORTEXR4 is not set
+# CONFIG_ARCH_CORTEXR4F is not set
+# CONFIG_ARCH_CORTEXR5 is not set
+# CONFIG_ARCH_CORTEX5F is not set
+# CONFIG_ARCH_CORTEXR7 is not set
+# CONFIG_ARCH_CORTEXR7F is not set
+CONFIG_ARCH_FAMILY="armv7-m"
+CONFIG_ARCH_CHIP="lpc43xx"
+# CONFIG_ARM_TOOLCHAIN_IAR is not set
+CONFIG_ARM_TOOLCHAIN_GNU=y
+# CONFIG_ARMV7M_USEBASEPRI is not set
+CONFIG_ARCH_HAVE_CMNVECTOR=y
+CONFIG_ARMV7M_CMNVECTOR=y
+# CONFIG_ARMV7M_LAZYFPU is not set
+CONFIG_ARCH_HAVE_FPU=y
+# CONFIG_ARCH_HAVE_DPFPU is not set
+# CONFIG_ARCH_FPU is not set
+# CONFIG_ARCH_HAVE_TRUSTZONE is not set
+CONFIG_ARM_HAVE_MPU_UNIFIED=y
+# CONFIG_ARM_MPU is not set
+
+#
+# ARMV7M Configuration Options
+#
+# CONFIG_ARMV7M_HAVE_ICACHE is not set
+# CONFIG_ARMV7M_HAVE_DCACHE is not set
+# CONFIG_ARMV7M_HAVE_ITCM is not set
+# CONFIG_ARMV7M_HAVE_DTCM is not set
+# CONFIG_ARMV7M_TOOLCHAIN_IARL is not set
+# CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT is not set
+# CONFIG_ARMV7M_TOOLCHAIN_CODEREDL is not set
+# CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL is not set
+CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIL=y
+# CONFIG_ARMV7M_HAVE_STACKCHECK is not set
+# CONFIG_ARMV7M_ITMSYSLOG is not set
+# CONFIG_SERIAL_TERMIOS is not set
+
+#
+# LPC43xx Configuration Options
+#
+# CONFIG_ARCH_CHIP_LPC4310FBD144 is not set
+# CONFIG_ARCH_CHIP_LPC4310FET100 is not set
+# CONFIG_ARCH_CHIP_LPC4320FBD144 is not set
+# CONFIG_ARCH_CHIP_LPC4320FET100 is not set
+CONFIG_ARCH_CHIP_LPC4330FBD144=y
+# CONFIG_ARCH_CHIP_LPC4330FET100 is not set
+# CONFIG_ARCH_CHIP_LPC4330FET180 is not set
+# CONFIG_ARCH_CHIP_LPC4330FET256 is not set
+# CONFIG_ARCH_CHIP_LPC4337JBD144 is not set
+# CONFIG_ARCH_CHIP_LPC4337JET100 is not set
+# CONFIG_ARCH_CHIP_LPC4350FBD208 is not set
+# CONFIG_ARCH_CHIP_LPC4350FET180 is not set
+# CONFIG_ARCH_CHIP_LPC4350FET256 is not set
+# CONFIG_ARCH_CHIP_LPC4353FBD208 is not set
+# CONFIG_ARCH_CHIP_LPC4353FET180 is not set
+# CONFIG_ARCH_CHIP_LPC4353FET256 is not set
+# CONFIG_ARCH_CHIP_LPC4357FET180 is not set
+# CONFIG_ARCH_CHIP_LPC4357FBD208 is not set
+# CONFIG_ARCH_CHIP_LPC4357FET256 is not set
+# CONFIG_ARCH_CHIP_LPC4370FET100 is not set
+CONFIG_ARCH_FAMILY_LPC4330=y
+# CONFIG_LPC43_BOOT_SRAM is not set
+CONFIG_LPC43_BOOT_SPIFI=y
+# CONFIG_LPC43_BOOT_FLASHA is not set
+# CONFIG_LPC43_BOOT_FLASHB is not set
+# CONFIG_LPC43_BOOT_CS0FLASH is not set
+# CONFIG_LPC43_BOOT_CS1FLASH is not set
+# CONFIG_LPC43_BOOT_CS2FLASH is not set
+# CONFIG_LPC43_BOOT_CS3FLASH is not set
+
+#
+# LPC43xx Peripheral Support
+#
+# CONFIG_LPC43_ADC0 is not set
+# CONFIG_LPC43_ADC1 is not set
+# CONFIG_LPC43_ATIMER is not set
+# CONFIG_LPC43_CAN1 is not set
+# CONFIG_LPC43_CAN2 is not set
+# CONFIG_LPC43_DAC is not set
+# CONFIG_LPC43_EMC is not set
+# CONFIG_LPC43_ETHERNET is not set
+# CONFIG_LPC43_EVNTMNTR is not set
+# CONFIG_LPC43_GPDMA is not set
+# CONFIG_LPC43_I2C0 is not set
+# CONFIG_LPC43_I2C1 is not set
+# CONFIG_LPC43_I2S0 is not set
+# CONFIG_LPC43_I2S1 is not set
+# CONFIG_LPC43_LCD is not set
+# CONFIG_LPC43_MCPWM is not set
+# CONFIG_LPC43_QEI is not set
+# CONFIG_LPC43_RIT is not set
+# CONFIG_LPC43_RTC is not set
+# CONFIG_LPC43_SCT is not set
+# CONFIG_LPC43_SDMMC is not set
+# CONFIG_LPC43_SPI is not set
+# CONFIG_LPC43_SPIFI is not set
+# CONFIG_LPC43_SSP0 is not set
+# CONFIG_LPC43_SSP1 is not set
+# CONFIG_LPC43_TMR0 is not set
+# CONFIG_LPC43_TMR1 is not set
+# CONFIG_LPC43_TMR2 is not set
+# CONFIG_LPC43_TMR3 is not set
+# CONFIG_LPC43_USART0 is not set
+CONFIG_LPC43_UART1=y
+# CONFIG_LPC43_USART2 is not set
+# CONFIG_LPC43_USART3 is not set
+# CONFIG_LPC43_USBOTG is not set
+CONFIG_LPC43_USB0=y
+# CONFIG_LPC43_USB1 is not set
+# CONFIG_LPC43_WWDT is not set
+# CONFIG_LPC43_GPIO_IRQ is not set
+
+#
+# Internal Memory Configuration
+#
+CONFIG_ARCH_HAVE_AHB_SRAM_BANK1=y
+# CONFIG_LPC43_USE_LOCSRAM_BANK1 is not set
+# CONFIG_LPC43_USE_AHBSRAM_BANK0 is not set
+# CONFIG_LPC43_USE_AHBSRAM_BANK1 is not set
+# CONFIG_LPC43_HEAP_AHBSRAM_BANK2 is not set
+
+#
+# External Memory Configuration
+#
+
+#
+# RS-485 Configuration
+#
+# CONFIG_USART2_RS485MODE is not set
+
+#
+# USB device controller driver (DCD) options
+#
+# CONFIG_LPC43_USB0DEV_NOVBUS is not set
+
+#
+# Architecture Options
+#
+# CONFIG_ARCH_NOINTC is not set
+# CONFIG_ARCH_VECNOTIRQ is not set
+# CONFIG_ARCH_DMA is not set
+CONFIG_ARCH_HAVE_IRQPRIO=y
+# CONFIG_ARCH_L2CACHE is not set
+# CONFIG_ARCH_HAVE_COHERENT_DCACHE is not set
+# CONFIG_ARCH_HAVE_ADDRENV is not set
+# CONFIG_ARCH_NEED_ADDRENV_MAPPING is not set
+# CONFIG_ARCH_HAVE_MULTICPU is not set
+CONFIG_ARCH_HAVE_VFORK=y
+# CONFIG_ARCH_HAVE_MMU is not set
+CONFIG_ARCH_HAVE_MPU=y
+# CONFIG_ARCH_NAND_HWECC is not set
+# CONFIG_ARCH_HAVE_EXTCLK is not set
+# CONFIG_ARCH_HAVE_POWEROFF is not set
+CONFIG_ARCH_HAVE_RESET=y
+# CONFIG_ARCH_USE_MPU is not set
+# CONFIG_ARCH_IRQPRIO is not set
+CONFIG_ARCH_STACKDUMP=y
+# CONFIG_ENDIAN_BIG is not set
+# CONFIG_ARCH_IDLE_CUSTOM is not set
+# CONFIG_ARCH_HAVE_RAMFUNCS is not set
+CONFIG_ARCH_HAVE_RAMVECTORS=y
+# CONFIG_ARCH_RAMVECTORS is not set
+
+#
+# Board Settings
+#
+CONFIG_BOARD_LOOPSPERMSEC=18535
+# CONFIG_ARCH_CALIBRATION is not set
+
+#
+# Interrupt options
+#
+CONFIG_ARCH_HAVE_INTERRUPTSTACK=y
+CONFIG_ARCH_INTERRUPTSTACK=0
+CONFIG_ARCH_HAVE_HIPRI_INTERRUPT=y
+# CONFIG_ARCH_HIPRI_INTERRUPT is not set
+
+#
+# Boot options
+#
+# CONFIG_BOOT_RUNFROMEXTSRAM is not set
+CONFIG_BOOT_RUNFROMFLASH=y
+# CONFIG_BOOT_RUNFROMISRAM is not set
+# CONFIG_BOOT_RUNFROMSDRAM is not set
+# CONFIG_BOOT_COPYTORAM is not set
+
+#
+# Boot Memory Configuration
+#
+CONFIG_RAM_START=0x10000000
+CONFIG_RAM_SIZE=131072
+# CONFIG_ARCH_HAVE_SDRAM is not set
+
+#
+# Board Selection
+#
+CONFIG_ARCH_BOARD_BAMBINO_200E=y
+# CONFIG_ARCH_BOARD_CUSTOM is not set
+CONFIG_ARCH_BOARD="bambino-200e"
+
+#
+# Common Board Options
+#
+CONFIG_ARCH_HAVE_LEDS=y
+CONFIG_ARCH_LEDS=y
+CONFIG_ARCH_HAVE_BUTTONS=y
+# CONFIG_ARCH_BUTTONS is not set
+CONFIG_ARCH_HAVE_IRQBUTTONS=y
+
+#
+# Board-Specific Options
+#
+# CONFIG_BOARD_CRASHDUMP is not set
+CONFIG_LIB_BOARDCTL=y
+# CONFIG_BOARDCTL_RESET is not set
+# CONFIG_BOARDCTL_UNIQUEID is not set
+CONFIG_BOARDCTL_USBDEVCTRL=y
+# CONFIG_BOARDCTL_TSCTEST is not set
+# CONFIG_BOARDCTL_ADCTEST is not set
+# CONFIG_BOARDCTL_PWMTEST is not set
+# CONFIG_BOARDCTL_GRAPHICS is not set
+# CONFIG_BOARDCTL_IOCTL is not set
+
+#
+# RTOS Features
+#
+CONFIG_DISABLE_OS_API=y
+# CONFIG_DISABLE_POSIX_TIMERS is not set
+# CONFIG_DISABLE_PTHREAD is not set
+# CONFIG_DISABLE_SIGNALS is not set
+# CONFIG_DISABLE_MQUEUE is not set
+# CONFIG_DISABLE_ENVIRON is not set
+
+#
+# Clocks and Timers
+#
+CONFIG_ARCH_HAVE_TICKLESS=y
+# CONFIG_SCHED_TICKLESS is not set
+CONFIG_USEC_PER_TICK=10000
+# CONFIG_SYSTEM_TIME64 is not set
+# CONFIG_CLOCK_MONOTONIC is not set
+# CONFIG_ARCH_HAVE_TIMEKEEPING is not set
+# CONFIG_JULIAN_TIME is not set
+CONFIG_START_YEAR=2012
+CONFIG_START_MONTH=7
+CONFIG_START_DAY=11
+CONFIG_MAX_WDOGPARMS=2
+CONFIG_PREALLOC_WDOGS=4
+CONFIG_WDOG_INTRESERVE=0
+CONFIG_PREALLOC_TIMERS=4
+
+#
+# Tasks and Scheduling
+#
+# CONFIG_INIT_NONE is not set
+CONFIG_INIT_ENTRYPOINT=y
+# CONFIG_INIT_FILEPATH is not set
+CONFIG_USER_ENTRYPOINT="nsh_main"
+CONFIG_RR_INTERVAL=200
+# CONFIG_SCHED_SPORADIC is not set
+CONFIG_TASK_NAME_SIZE=0
+CONFIG_MAX_TASKS=16
+# CONFIG_SCHED_HAVE_PARENT is not set
+CONFIG_SCHED_WAITPID=y
+
+#
+# Pthread Options
+#
+# CONFIG_MUTEX_TYPES is not set
+CONFIG_NPTHREAD_KEYS=4
+
+#
+# Performance Monitoring
+#
+# CONFIG_SCHED_CPULOAD is not set
+# CONFIG_SCHED_INSTRUMENTATION is not set
+
+#
+# Files and I/O
+#
+CONFIG_DEV_CONSOLE=y
+# CONFIG_FDCLONE_DISABLE is not set
+# CONFIG_FDCLONE_STDIO is not set
+CONFIG_SDCLONE_DISABLE=y
+CONFIG_NFILE_DESCRIPTORS=8
+CONFIG_NFILE_STREAMS=8
+CONFIG_NAME_MAX=32
+# CONFIG_PRIORITY_INHERITANCE is not set
+
+#
+# RTOS hooks
+#
+# CONFIG_BOARD_INITIALIZE is not set
+# CONFIG_SCHED_STARTHOOK is not set
+# CONFIG_SCHED_ATEXIT is not set
+# CONFIG_SCHED_ONEXIT is not set
+
+#
+# Signal Numbers
+#
+CONFIG_SIG_SIGUSR1=1
+CONFIG_SIG_SIGUSR2=2
+CONFIG_SIG_SIGALARM=3
+CONFIG_SIG_SIGCONDTIMEDOUT=16
+
+#
+# POSIX Message Queue Options
+#
+CONFIG_PREALLOC_MQ_MSGS=4
+CONFIG_MQ_MAXMSGSIZE=32
+# CONFIG_MODULE is not set
+
+#
+# Work queue support
+#
+# CONFIG_SCHED_WORKQUEUE is not set
+# CONFIG_SCHED_HPWORK is not set
+# CONFIG_SCHED_LPWORK is not set
+
+#
+# Stack and heap information
+#
+CONFIG_IDLETHREAD_STACKSIZE=1024
+CONFIG_USERMAIN_STACKSIZE=2048
+CONFIG_PTHREAD_STACK_MIN=256
+CONFIG_PTHREAD_STACK_DEFAULT=2048
+# CONFIG_LIB_SYSCALL is not set
+
+#
+# Device Drivers
+#
+# CONFIG_DISABLE_POLL is not set
+CONFIG_DEV_NULL=y
+# CONFIG_DEV_ZERO is not set
+# CONFIG_DEV_URANDOM is not set
+# CONFIG_DEV_LOOP is not set
+
+#
+# Buffering
+#
+# CONFIG_DRVR_WRITEBUFFER is not set
+# CONFIG_DRVR_READAHEAD is not set
+# CONFIG_RAMDISK is not set
+# CONFIG_CAN is not set
+# CONFIG_ARCH_HAVE_PWM_PULSECOUNT is not set
+# CONFIG_ARCH_HAVE_PWM_MULTICHAN is not set
+# CONFIG_PWM is not set
+# CONFIG_ARCH_HAVE_I2CRESET is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_I2S is not set
+
+#
+# Timer Driver Support
+#
+# CONFIG_TIMER is not set
+# CONFIG_ONESHOT is not set
+# CONFIG_RTC is not set
+# CONFIG_WATCHDOG is not set
+# CONFIG_ANALOG is not set
+# CONFIG_AUDIO_DEVICES is not set
+# CONFIG_VIDEO_DEVICES is not set
+# CONFIG_BCH is not set
+# CONFIG_INPUT is not set
+
+#
+# IO Expander/GPIO Support
+#
+# CONFIG_IOEXPANDER is not set
+# CONFIG_DEV_GPIO is not set
+
+#
+# LCD Driver Support
+#
+# CONFIG_LCD is not set
+# CONFIG_SLCD is not set
+
+#
+# LED Support
+#
+# CONFIG_USERLED is not set
+# CONFIG_RGBLED is not set
+# CONFIG_PCA9635PW is not set
+# CONFIG_NCP5623C is not set
+# CONFIG_MMCSD is not set
+# CONFIG_MODEM is not set
+# CONFIG_MTD is not set
+# CONFIG_EEPROM is not set
+# CONFIG_PIPES is not set
+# CONFIG_PM is not set
+# CONFIG_POWER is not set
+# CONFIG_SENSORS is not set
+# CONFIG_SERCOMM_CONSOLE is not set
+CONFIG_SERIAL=y
+# CONFIG_DEV_LOWCONSOLE is not set
+CONFIG_SERIAL_REMOVABLE=y
+CONFIG_SERIAL_CONSOLE=y
+# CONFIG_16550_UART is not set
+# CONFIG_UART_SERIALDRIVER is not set
+# CONFIG_UART0_SERIALDRIVER is not set
+CONFIG_UART1_SERIALDRIVER=y
+# CONFIG_UART2_SERIALDRIVER is not set
+# CONFIG_UART3_SERIALDRIVER is not set
+# CONFIG_UART4_SERIALDRIVER is not set
+# CONFIG_UART5_SERIALDRIVER is not set
+# CONFIG_UART6_SERIALDRIVER is not set
+# CONFIG_UART7_SERIALDRIVER is not set
+# CONFIG_UART8_SERIALDRIVER is not set
+# CONFIG_SCI0_SERIALDRIVER is not set
+# CONFIG_SCI1_SERIALDRIVER is not set
+# CONFIG_USART0_SERIALDRIVER is not set
+# CONFIG_USART1_SERIALDRIVER is not set
+# CONFIG_USART2_SERIALDRIVER is not set
+# CONFIG_USART3_SERIALDRIVER is not set
+# CONFIG_USART4_SERIALDRIVER is not set
+# CONFIG_USART5_SERIALDRIVER is not set
+# CONFIG_USART6_SERIALDRIVER is not set
+# CONFIG_USART7_SERIALDRIVER is not set
+# CONFIG_USART8_SERIALDRIVER is not set
+# CONFIG_OTHER_UART_SERIALDRIVER is not set
+CONFIG_MCU_SERIAL=y
+CONFIG_STANDARD_SERIAL=y
+CONFIG_SERIAL_NPOLLWAITERS=2
+# CONFIG_SERIAL_IFLOWCONTROL is not set
+# CONFIG_SERIAL_OFLOWCONTROL is not set
+# CONFIG_SERIAL_DMA is not set
+# CONFIG_SERIAL_TIOCSERGSTRUCT is not set
+CONFIG_ARCH_HAVE_SERIAL_TERMIOS=y
+CONFIG_UART1_SERIAL_CONSOLE=y
+# CONFIG_USART2_SERIAL_CONSOLE is not set
+# CONFIG_OTHER_SERIAL_CONSOLE is not set
+# CONFIG_NO_SERIAL_CONSOLE is not set
+
+#
+# UART1 Configuration
+#
+CONFIG_UART1_RXBUFSIZE=256
+CONFIG_UART1_TXBUFSIZE=256
+CONFIG_UART1_BAUD=115200
+CONFIG_UART1_BITS=8
+CONFIG_UART1_PARITY=0
+CONFIG_UART1_2STOP=0
+# CONFIG_UART1_IFLOWCONTROL is not set
+# CONFIG_UART1_OFLOWCONTROL is not set
+# CONFIG_UART1_DMA is not set
+# CONFIG_PSEUDOTERM is not set
+CONFIG_USBDEV=y
+
+#
+# USB Device Controller Driver Options
+#
+# CONFIG_USBDEV_ISOCHRONOUS is not set
+# CONFIG_USBDEV_DUALSPEED is not set
+CONFIG_USBDEV_SELFPOWERED=y
+# CONFIG_USBDEV_BUSPOWERED is not set
+CONFIG_USBDEV_MAXPOWER=100
+# CONFIG_USBDEV_DMA is not set
+# CONFIG_ARCH_USBDEV_STALLQUEUE is not set
+# CONFIG_USBDEV_TRACE is not set
+
+#
+# USB Device Class Driver Options
+#
+# CONFIG_USBDEV_COMPOSITE is not set
+# CONFIG_PL2303 is not set
+CONFIG_CDCACM=y
+# CONFIG_CDCACM_CONSOLE is not set
+CONFIG_CDCACM_EP0MAXPACKET=64
+CONFIG_CDCACM_EPINTIN=1
+CONFIG_CDCACM_EPINTIN_FSSIZE=64
+CONFIG_CDCACM_EPINTIN_HSSIZE=64
+CONFIG_CDCACM_EPBULKOUT=3
+CONFIG_CDCACM_EPBULKOUT_FSSIZE=64
+CONFIG_CDCACM_EPBULKOUT_HSSIZE=512
+CONFIG_CDCACM_EPBULKIN=2
+CONFIG_CDCACM_EPBULKIN_FSSIZE=64
+CONFIG_CDCACM_EPBULKIN_HSSIZE=512
+CONFIG_CDCACM_NRDREQS=4
+CONFIG_CDCACM_NWRREQS=4
+CONFIG_CDCACM_BULKIN_REQLEN=96
+CONFIG_CDCACM_RXBUFSIZE=257
+CONFIG_CDCACM_TXBUFSIZE=193
+CONFIG_CDCACM_VENDORID=0x0525
+CONFIG_CDCACM_PRODUCTID=0xa4a7
+CONFIG_CDCACM_VENDORSTR="NuttX"
+CONFIG_CDCACM_PRODUCTSTR="CDC/ACM Serial"
+# CONFIG_USBMSC is not set
+# CONFIG_USBHOST is not set
+# CONFIG_HAVE_USBTRACE is not set
+# CONFIG_DRIVERS_WIRELESS is not set
+# CONFIG_DRIVERS_CONTACTLESS is not set
+
+#
+# System Logging
+#
+# CONFIG_ARCH_SYSLOG is not set
+# CONFIG_RAMLOG is not set
+# CONFIG_SYSLOG_INTBUFFER is not set
+# CONFIG_SYSLOG_TIMESTAMP is not set
+CONFIG_SYSLOG_SERIAL_CONSOLE=y
+# CONFIG_SYSLOG_CHAR is not set
+CONFIG_SYSLOG_CONSOLE=y
+# CONFIG_SYSLOG_NONE is not set
+# CONFIG_SYSLOG_FILE is not set
+# CONFIG_SYSLOG_CHARDEV is not set
+
+#
+# Networking Support
+#
+# CONFIG_ARCH_HAVE_NET is not set
+# CONFIG_ARCH_HAVE_PHY is not set
+# CONFIG_NET is not set
+
+#
+# Crypto API
+#
+# CONFIG_CRYPTO is not set
+
+#
+# File Systems
+#
+
+#
+# File system configuration
+#
+# CONFIG_DISABLE_MOUNTPOINT is not set
+# CONFIG_FS_AUTOMOUNTER is not set
+# CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
+CONFIG_FS_READABLE=y
+CONFIG_FS_WRITABLE=y
+# CONFIG_FS_NAMED_SEMAPHORES is not set
+CONFIG_FS_MQUEUE_MPATH="/var/mqueue"
+# CONFIG_FS_RAMMAP is not set
+CONFIG_FS_FAT=y
+CONFIG_FAT_LCNAMES=y
+CONFIG_FAT_LFN=y
+CONFIG_FAT_MAXFNAME=32
+# CONFIG_FS_FATTIME is not set
+# CONFIG_FAT_FORCE_INDIRECT is not set
+# CONFIG_FAT_DMAMEMORY is not set
+# CONFIG_FAT_DIRECT_RETRY is not set
+# CONFIG_FS_NXFFS is not set
+# CONFIG_FS_ROMFS is not set
+# CONFIG_FS_TMPFS is not set
+# CONFIG_FS_SMARTFS is not set
+# CONFIG_FS_PROCFS is not set
+# CONFIG_FS_UNIONFS is not set
+
+#
+# Graphics Support
+#
+# CONFIG_NX is not set
+
+#
+# Memory Management
+#
+# CONFIG_MM_SMALL is not set
+CONFIG_MM_REGIONS=2
+# CONFIG_ARCH_HAVE_HEAP2 is not set
+# CONFIG_GRAN is not set
+
+#
+# Audio Support
+#
+# CONFIG_AUDIO is not set
+
+#
+# Wireless Support
+#
+
+#
+# Binary Loader
+#
+# CONFIG_BINFMT_DISABLE is not set
+# CONFIG_BINFMT_EXEPATH is not set
+# CONFIG_NXFLAT is not set
+# CONFIG_ELF is not set
+CONFIG_BUILTIN=y
+# CONFIG_PIC is not set
+CONFIG_SYMTAB_ORDEREDBYNAME=y
+
+#
+# Library Routines
+#
+
+#
+# Standard C Library Options
+#
+CONFIG_STDIO_BUFFER_SIZE=64
+CONFIG_STDIO_LINEBUFFER=y
+CONFIG_NUNGET_CHARS=2
+CONFIG_LIB_HOMEDIR="/"
+# CONFIG_LIBM is not set
+# CONFIG_NOPRINTF_FIELDWIDTH is not set
+# CONFIG_LIBC_FLOATINGPOINT is not set
+CONFIG_LIBC_LONG_LONG=y
+# CONFIG_LIBC_IOCTL_VARIADIC is not set
+# CONFIG_LIBC_WCHAR is not set
+# CONFIG_LIBC_LOCALE is not set
+CONFIG_LIB_RAND_ORDER=1
+# CONFIG_EOL_IS_CR is not set
+# CONFIG_EOL_IS_LF is not set
+# CONFIG_EOL_IS_BOTH_CRLF is not set
+CONFIG_EOL_IS_EITHER_CRLF=y
+# CONFIG_LIBC_EXECFUNCS is not set
+CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=1024
+CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=2048
+# CONFIG_LIBC_STRERROR is not set
+# CONFIG_LIBC_PERROR_STDOUT is not set
+CONFIG_LIBC_TMPDIR="/tmp"
+CONFIG_LIBC_MAX_TMPFILE=32
+CONFIG_ARCH_LOWPUTC=y
+# CONFIG_LIBC_LOCALTIME is not set
+# CONFIG_TIME_EXTENDED is not set
+CONFIG_LIB_SENDFILE_BUFSIZE=512
+# CONFIG_ARCH_ROMGETC is not set
+# CONFIG_ARCH_OPTIMIZED_FUNCTIONS is not set
+CONFIG_ARCH_HAVE_TLS=y
+# CONFIG_TLS is not set
+# CONFIG_LIBC_NETDB is not set
+# CONFIG_NETDB_HOSTFILE is not set
+
+#
+# Non-standard Library Support
+#
+# CONFIG_LIB_CRC64_FAST is not set
+# CONFIG_LIB_KBDCODEC is not set
+# CONFIG_LIB_SLCDCODEC is not set
+# CONFIG_LIB_HEX2BIN is not set
+
+#
+# Basic CXX Support
+#
+# CONFIG_C99_BOOL8 is not set
+# CONFIG_HAVE_CXX is not set
+
+#
+# Application Configuration
+#
+
+#
+# Built-In Applications
+#
+CONFIG_BUILTIN_PROXY_STACKSIZE=1024
+
+#
+# CAN Utilities
+#
+
+#
+# Examples
+#
+# CONFIG_EXAMPLES_BUTTONS is not set
+# CONFIG_EXAMPLES_CCTYPE is not set
+# CONFIG_EXAMPLES_CHAT is not set
+# CONFIG_EXAMPLES_CONFIGDATA is not set
+# CONFIG_EXAMPLES_DHCPD is not set
+# CONFIG_EXAMPLES_ELF is not set
+# CONFIG_EXAMPLES_FSTEST is not set
+# CONFIG_EXAMPLES_FTPC is not set
+# CONFIG_EXAMPLES_FTPD is not set
+# CONFIG_EXAMPLES_HELLO is not set
+# CONFIG_EXAMPLES_HIDKBD is not set
+# CONFIG_EXAMPLES_IGMP is not set
+# CONFIG_EXAMPLES_JSON is not set
+# CONFIG_EXAMPLES_KEYPADTEST is not set
+# CONFIG_EXAMPLES_MEDIA is not set
+# CONFIG_EXAMPLES_MM is not set
+# CONFIG_EXAMPLES_MODBUS is not set
+# CONFIG_EXAMPLES_MOUNT is not set
+# CONFIG_EXAMPLES_NRF24L01TERM is not set
+CONFIG_EXAMPLES_NSH=y
+# CONFIG_EXAMPLES_NULL is not set
+# CONFIG_EXAMPLES_NXFFS is not set
+# CONFIG_EXAMPLES_NXHELLO is not set
+# CONFIG_EXAMPLES_NXIMAGE is not set
+# CONFIG_EXAMPLES_NX is not set
+# CONFIG_EXAMPLES_NXLINES is not set
+# CONFIG_EXAMPLES_NXTERM is not set
+# CONFIG_EXAMPLES_NXTEXT is not set
+# CONFIG_EXAMPLES_OSTEST is not set
+# CONFIG_EXAMPLES_PCA9635 is not set
+# CONFIG_EXAMPLES_POSIXSPAWN is not set
+# CONFIG_EXAMPLES_PPPD is not set
+# CONFIG_EXAMPLES_RFID_READUID is not set
+# CONFIG_EXAMPLES_RGBLED is not set
+# CONFIG_EXAMPLES_RGMP is not set
+# CONFIG_EXAMPLES_SENDMAIL is not set
+# CONFIG_EXAMPLES_SERIALBLASTER is not set
+# CONFIG_EXAMPLES_SERIALRX is not set
+# CONFIG_EXAMPLES_SERLOOP is not set
+# CONFIG_EXAMPLES_SLCD is not set
+# CONFIG_EXAMPLES_SMART is not set
+# CONFIG_EXAMPLES_SMART_TEST is not set
+# CONFIG_EXAMPLES_SMP is not set
+# CONFIG_EXAMPLES_TCPECHO is not set
+# CONFIG_EXAMPLES_TELNETD is not set
+# CONFIG_EXAMPLES_TIFF is not set
+# CONFIG_EXAMPLES_TOUCHSCREEN is not set
+# CONFIG_EXAMPLES_USBSERIAL is not set
+# CONFIG_EXAMPLES_USBTERM is not set
+# CONFIG_EXAMPLES_WATCHDOG is not set
+# CONFIG_EXAMPLES_WEBSERVER is not set
+
+#
+# File System Utilities
+#
+# CONFIG_FSUTILS_INIFILE is not set
+# CONFIG_FSUTILS_PASSWD is not set
+
+#
+# GPS Utilities
+#
+# CONFIG_GPSUTILS_MINMEA_LIB is not set
+
+#
+# Graphics Support
+#
+# CONFIG_TIFF is not set
+# CONFIG_GRAPHICS_TRAVELER is not set
+
+#
+# Interpreters
+#
+# CONFIG_INTERPRETERS_BAS is not set
+# CONFIG_INTERPRETERS_FICL is not set
+# CONFIG_INTERPRETERS_MICROPYTHON is not set
+# CONFIG_INTERPRETERS_MINIBASIC is not set
+# CONFIG_INTERPRETERS_PCODE is not set
+
+#
+# FreeModBus
+#
+# CONFIG_MODBUS is not set
+
+#
+# Network Utilities
+#
+# CONFIG_NETUTILS_CHAT is not set
+# CONFIG_NETUTILS_CODECS is not set
+# CONFIG_NETUTILS_ESP8266 is not set
+# CONFIG_NETUTILS_FTPC is not set
+# CONFIG_NETUTILS_JSON is not set
+# CONFIG_NETUTILS_SMTP is not set
+
+#
+# NSH Library
+#
+CONFIG_NSH_LIBRARY=y
+# CONFIG_NSH_MOTD is not set
+
+#
+# Command Line Configuration
+#
+CONFIG_NSH_READLINE=y
+# CONFIG_NSH_CLE is not set
+CONFIG_NSH_LINELEN=64
+# CONFIG_NSH_DISABLE_SEMICOLON is not set
+CONFIG_NSH_CMDPARMS=y
+CONFIG_NSH_MAXARGUMENTS=6
+CONFIG_NSH_ARGCAT=y
+CONFIG_NSH_NESTDEPTH=3
+# CONFIG_NSH_DISABLEBG is not set
+CONFIG_NSH_BUILTIN_APPS=y
+
+#
+# Disable Individual commands
+#
+# CONFIG_NSH_DISABLE_ADDROUTE is not set
+# CONFIG_NSH_DISABLE_BASENAME is not set
+# CONFIG_NSH_DISABLE_CAT is not set
+# CONFIG_NSH_DISABLE_CD is not set
+# CONFIG_NSH_DISABLE_CP is not set
+# CONFIG_NSH_DISABLE_CMP is not set
+CONFIG_NSH_DISABLE_DATE=y
+# CONFIG_NSH_DISABLE_DD is not set
+# CONFIG_NSH_DISABLE_DF is not set
+# CONFIG_NSH_DISABLE_DELROUTE is not set
+# CONFIG_NSH_DISABLE_DIRNAME is not set
+# CONFIG_NSH_DISABLE_ECHO is not set
+# CONFIG_NSH_DISABLE_EXEC is not set
+# CONFIG_NSH_DISABLE_EXIT is not set
+# CONFIG_NSH_DISABLE_FREE is not set
+# CONFIG_NSH_DISABLE_GET is not set
+# CONFIG_NSH_DISABLE_HELP is not set
+# CONFIG_NSH_DISABLE_HEXDUMP is not set
+# CONFIG_NSH_DISABLE_IFCONFIG is not set
+CONFIG_NSH_DISABLE_IFUPDOWN=y
+# CONFIG_NSH_DISABLE_KILL is not set
+# CONFIG_NSH_DISABLE_LOSETUP is not set
+CONFIG_NSH_DISABLE_LOSMART=y
+# CONFIG_NSH_DISABLE_LS is not set
+# CONFIG_NSH_DISABLE_MB is not set
+# CONFIG_NSH_DISABLE_MKDIR is not set
+# CONFIG_NSH_DISABLE_MKFATFS is not set
+# CONFIG_NSH_DISABLE_MKRD is not set
+# CONFIG_NSH_DISABLE_MH is not set
+# CONFIG_NSH_DISABLE_MOUNT is not set
+# CONFIG_NSH_DISABLE_MV is not set
+# CONFIG_NSH_DISABLE_MW is not set
+CONFIG_NSH_DISABLE_PRINTF=y
+# CONFIG_NSH_DISABLE_PS is not set
+# CONFIG_NSH_DISABLE_PUT is not set
+# CONFIG_NSH_DISABLE_PWD is not set
+# CONFIG_NSH_DISABLE_RM is not set
+# CONFIG_NSH_DISABLE_RMDIR is not set
+# CONFIG_NSH_DISABLE_SET is not set
+# CONFIG_NSH_DISABLE_SH is not set
+# CONFIG_NSH_DISABLE_SLEEP is not set
+# CONFIG_NSH_DISABLE_TIME is not set
+# CONFIG_NSH_DISABLE_TEST is not set
+# CONFIG_NSH_DISABLE_UMOUNT is not set
+# CONFIG_NSH_DISABLE_UNAME is not set
+# CONFIG_NSH_DISABLE_UNSET is not set
+# CONFIG_NSH_DISABLE_USLEEP is not set
+# CONFIG_NSH_DISABLE_WGET is not set
+# CONFIG_NSH_DISABLE_XD is not set
+CONFIG_NSH_MMCSDMINOR=0
+
+#
+# Configure Command Options
+#
+CONFIG_NSH_CMDOPT_DF_H=y
+CONFIG_NSH_CODECS_BUFSIZE=128
+CONFIG_NSH_CMDOPT_HEXDUMP=y
+CONFIG_NSH_FILEIOSIZE=512
+
+#
+# Scripting Support
+#
+# CONFIG_NSH_DISABLESCRIPT is not set
+# CONFIG_NSH_DISABLE_ITEF is not set
+# CONFIG_NSH_DISABLE_LOOPS is not set
+
+#
+# Console Configuration
+#
+CONFIG_NSH_CONSOLE=y
+# CONFIG_NSH_USBCONSOLE is not set
+# CONFIG_NSH_ALTCONDEV is not set
+CONFIG_NSH_ARCHINIT=y
+# CONFIG_NSH_LOGIN is not set
+# CONFIG_NSH_CONSOLE_LOGIN is not set
+
+#
+# NxWidgets/NxWM
+#
+
+#
+# Platform-specific Support
+#
+# CONFIG_PLATFORM_CONFIGDATA is not set
+
+#
+# System Libraries and NSH Add-Ons
+#
+CONFIG_SYSTEM_CDCACM=y
+CONFIG_SYSTEM_CDCACM_DEVMINOR=1
+# CONFIG_SYSTEM_CLE is not set
+# CONFIG_SYSTEM_CUTERM is not set
+# CONFIG_SYSTEM_FREE is not set
+# CONFIG_SYSTEM_HEX2BIN is not set
+# CONFIG_SYSTEM_HEXED is not set
+# CONFIG_SYSTEM_INSTALL is not set
+# CONFIG_SYSTEM_RAMTEST is not set
+CONFIG_READLINE_HAVE_EXTMATCH=y
+CONFIG_SYSTEM_READLINE=y
+CONFIG_READLINE_ECHO=y
+# CONFIG_READLINE_TABCOMPLETION is not set
+# CONFIG_READLINE_CMD_HISTORY is not set
+# CONFIG_SYSTEM_SUDOKU is not set
+# CONFIG_SYSTEM_SYSTEM is not set
+# CONFIG_SYSTEM_TEE is not set
+# CONFIG_SYSTEM_UBLOXMODEM is not set
+# CONFIG_SYSTEM_VI is not set
+# CONFIG_SYSTEM_ZMODEM is not set
diff --git a/configs/bambino-200e/nsh/setenv.sh b/configs/bambino-200e/nsh/setenv.sh
new file mode 100644
index 00000000000..9c39a440b66
--- /dev/null
+++ b/configs/bambino-200e/nsh/setenv.sh
@@ -0,0 +1,92 @@
+#!/bin/bash
+# configs/bambino-200e/nsh/setenv.sh
+#
+# Copyright (C) 2016 Gregory Nutt. All rights reserved.
+# Author: Gregory Nutt
+# Alan Carvalho de Assis acassis@gmail.com [nuttx]
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+# used to endorse or promote products derived from this software
+# without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+
+if [ "$_" = "$0" ] ; then
+ echo "You must source this script, not run it!" 1>&2
+ exit 1
+fi
+
+WD=`pwd`
+if [ ! -x "setenv.sh" ]; then
+ echo "This script must be executed from the top-level NuttX build directory"
+ exit 1
+fi
+
+if [ -z "${PATH_ORIG}" ]; then
+ export PATH_ORIG="${PATH}"
+fi
+
+# This is the Cygwin path to the location where I installed the Code Red
+# toolchain under windows. You will have to edit this if you install the
+# Code Red toolchain in any other location or if you install a different
+# version
+export TOOLCHAIN_BIN="/cygdrive/c/code_red/RedSuite_4.2.3_379/redsuite/Tools/bin"
+#export SCRIPT_BIN="/cygdrive/c/code_red/RedSuite_4.2.3_379/redsuite/bin"
+export SCRIPT_BIN="/cygdrive/c/nxp/LPCXpresso_4.2.3_292/lpcxpresso/bin"
+
+# This is the Cygwin path to the location where I installed the CodeSourcery
+# toolchain under windows. You will also have to edit this if you install
+# the CodeSourcery toolchain in any other location
+#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin"
+#export SCRIPT_BIN=
+
+# These are the Cygwin paths to the locations where I installed the Atollic
+# toolchain under windows. You will also have to edit this if you install
+# the Atollic toolchain in any other location. /usr/bin is added before
+# the Atollic bin path because there is are binaries named gcc.exe and g++.exe
+# at those locations as well.
+#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for ARM Pro 2.3.0/ARMTools/bin"
+#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for STMicroelectronics STM32 Lite 2.3.0/ARMTools/bin"
+#export SCRIPT_BIN=
+
+# This is the Cygwin path to the location where I build the buildroot
+# toolchain.
+#export TOOLCHAIN_BIN="${WD}/../buildroot/build_arm_nofpu/staging_dir/bin"
+#export SCRIPT_BIN=
+
+# And add the selected toolchain path[s] to the PATH variable
+
+export PATH="/sbin:/usr/sbin:${PATH_ORIG}"
+
+if [ ! -z ${SCRIPT_BIN} ]; then
+ export PATH="${SCRIPT_BIN}:${PATH}"
+fi
+
+export PATH="${TOOLCHAIN_BIN}:${PATH}"
+echo "PATH : ${PATH}"
+
+# Set an alias that can be used to put the LPC43xx in boot mode
+
+alias lpc43xx='${SCRIPT_BIN}/Scripts/bootLPCXpresso.cmd winusb'
diff --git a/configs/bambino-200e/scripts/flash.sh b/configs/bambino-200e/scripts/flash.sh
new file mode 100644
index 00000000000..f738b460bc9
--- /dev/null
+++ b/configs/bambino-200e/scripts/flash.sh
@@ -0,0 +1,156 @@
+#!/bin/bash
+####################################################################################
+# flash.sh
+#
+# Copyright (C) 2016 Gregory Nutt. All rights reserved.
+# Author: Gregory Nutt
+# Alan Carvalho de Assis acassis@gmail.com [nuttx]
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+# used to endorse or promote products derived from this software
+# without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+####################################################################################
+set -x
+
+USAGE="$0 "
+
+# LPCXpresso 3.6 installed at /cygdrive/c/nxp/lpcxpresso_3.6"
+
+BINDIR="/cygdrive/c/nxp/LPCXpresso_4.2.3_292/lpcxpresso/bin"
+
+# RedSuite with LPC4330 support installed at /cygdrive/c/code_red/RedSuite_4.2.3_379 "
+
+#BINDIR="/cygdrive/c/code_red/RedSuite_4.2.3_379/redsuite/bin"
+
+TARGET=LPC4330
+
+echo "############################################################################"
+echo "# Assumptions:"
+echo "#"
+echo "# - Windows 7"
+echo "# - Binaries installed at ${BINDIR}"
+echo "# - AXF image built with Code Red"
+echo "# - ${TARGET}"
+echo "#"
+echo "# You will need to edit this is any of the above are false"
+echo "#"
+echo "############################################################################"
+echo ""
+
+# This is the default install location for binaries on Windows (note that this
+# path could change with the Code Red version number)
+
+if [ ! -d "${BINDIR}" ]; then
+ echo "Directory ${BINDIR} does not exist"
+ exit 1
+fi
+
+# This is the relative path to the booLPCXpresso utility.
+
+BOOTLPC="Scripts/bootLPCXpresso.cmd"
+if [ ! -x "${BINDIR}/${BOOTLPC}" ]; then
+ echo "No executable at ${BINDIR}/${BOOTLPC}"
+ exit 1
+fi
+
+# bootLPCXpresso arguments
+
+BOOTLPC_ARG=winusb # Win7
+
+# Use the LPC18xx/LPC43xx flash utility
+
+FLASHUTIL="crt_emu_lpc18_43_nxp" # for LPC18xx/LPC43xx parts
+
+if [ ! -x "${BINDIR}/${FLASHUTIL}" ]; then
+ echo "No executable file at ${BINDIR}/${FLASHUTIL}"
+ exit 1
+fi
+
+# FLUSHUTIL arguements
+
+WIRE="-wire=winusb" # for LPC-Link on Windows Vista/Windows 7)
+
+# The nuttx directory must be provided as an argument
+
+NUTTX=$1
+if [ -z "${NUTTX}" ]; then
+ echo "Missing argument"
+ echo $USAGE
+ exit 1
+fi
+
+if [ ! -d "${NUTTX}" ]; then
+ echo "Directory ${NUTTX} does not exist"
+ echo $USAGE
+ exit 1
+fi
+
+# The binary to download:
+
+if [ ! -f "${NUTTX}/nuttx.axf" ]; then
+ if [ -f "${NUTTX}/nuttx" ]; then
+ echo "Renaming ${NUTTX}/nuttx to ${NUTTX}/nuttx.axf"
+ mv ${NUTTX}/nuttx ${NUTTX}/nuttx.axf
+ fi
+else
+ if [ -f "${NUTTX}/nuttx" ]; then
+ echo "Both ${NUTTX}/nuttx ${NUTTX}/nuttx.axf exist.."
+ echo " Deleting ${NUTTX}/nuttx.axf"
+ rm -f ${NUTTX}/nuttx.axf
+ echo "Renaming ${NUTTX}/nuttx to ${NUTTX}/nuttx.axf"
+ mv ${NUTTX}/nuttx ${NUTTX}/nuttx.axf
+ fi
+fi
+NUTTXPATH=`cygpath -w "${NUTTX}/nuttx.axf"`
+
+# First of all boot the LPC-Link using the script: ${BINDIR}/${BOOTLPC}
+
+cd ${BINDIR} || \
+ { echo "Failed to CD to ${BINDIR}"; exit 1; }
+./${BOOTLPC} ${BOOTLPC_ARG} || \
+ { echo "'${BOOTLPC} ${BOOTLPC_ARG}' Failed"; }
+
+echo ""
+echo "Wait a bit"
+echo "5..."
+sleep 1
+echo "4..."
+sleep 1
+echo "3..."
+sleep 1
+echo "2..."
+sleep 1
+echo "1..."
+sleep 1
+echo "0..."
+echo ""
+
+# Then program the FLASH
+
+cd ${BINDIR} || \
+ { echo "Failed to CD to ${BINDIR}"; exit 1; }
+./${FLASHUTIL} ${WIRE} -p${TARGET} -flash-load-exec="${NUTTXPATH}"
diff --git a/configs/bambino-200e/scripts/ramconfig.ld b/configs/bambino-200e/scripts/ramconfig.ld
new file mode 100644
index 00000000000..c524bf25bfb
--- /dev/null
+++ b/configs/bambino-200e/scripts/ramconfig.ld
@@ -0,0 +1,151 @@
+/****************************************************************************
+ * configs/bambino-200e/scripts/ramconfig.ld
+ *
+ * Copyright (C) 2016 Gregory Nutt. All rights reserved.
+ * Author: Gregory Nutt
+ * Alan Carvalho de Assis acassis@gmail.com [nuttx]
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ * used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+/*
+ * Power-Up Reset Overview
+ * -----------------------
+ *
+ * The ARM core starts executing code on reset with the program counter set
+ * to 0x0000 0000. The LPC43xx contains a shadow pointer register that
+ * allows areas of memory to be mapped to address 0x0000 0000. The default,
+ * reset value of the shadow pointer is 0x1040 0000 so that on reset code in
+ * the boot ROM is always executed first.
+ *
+ * The boot starts after reset is released. The IRC is selected as CPU clock
+ * and the Cortex-M4 starts the boot loader. By default the JTAG access to the
+ * chip is disabled at reset. The boot ROM determines the boot mode based on
+ * the OTP BOOT_SRC value or reset state pins. For flash-based parts, the part
+ * boots from internal flash by default. Otherwse, the boot ROM copies the
+ * image to internal SRAM at location 0x1000 0000, sets the ARM's shadow
+ * pointer to 0x1000 0000, and jumps to that location.
+ *
+ * However, using JTAG the executable image can be also loaded directly into
+ * and executed from SRAM.
+ */
+
+/* The LPC4330 on the LPC4330-Xplorer has the following memory resources:
+ *
+ * 1. 4096Kb of SPIFI FLASH beginning at address 0x1400:0000
+ * 2. 264KB of total SRAM:
+ * a. 128KB of SRAM in the CPU block beginning at address 0x1000:0000
+ * b. 72KB beginning at address 0x1008:0000 and
+ * c. 64KB of AHB SRAM in three banks beginning at addresses 0x2000:0000,
+ * 0x2000:8000 and 0x2000:C000.
+ * 3. No internal FLASH
+ *
+ * Here we assume that:
+ *
+ * 1. We will be running out of SRAM at 0x1000:0000, and
+ * 2. All .data and .bss will all fit into the 72KB SRAM block.
+ *
+ * NOTE: That initialized data is kept in the program memory SRAM and copied
+ * to .data SRAM. This is wasteful and unnecessary but provides a good test
+ * for future, FLASH-resident code.
+ */
+
+MEMORY
+{
+ progmem (rx) : ORIGIN = 0x10000000, LENGTH = 128K
+ datamem (rwx) : ORIGIN = 0x10080000, LENGTH = 72K
+}
+
+OUTPUT_ARCH(arm)
+ENTRY(__start) /* Treat __start as the anchor for dead code stripping */
+EXTERN(_vectors) /* Force the vectors to be included in the output */
+SECTIONS
+{
+ .text : {
+ _stext = ABSOLUTE(.);
+ *(.vectors)
+ *(.text .text.*)
+ *(.fixup)
+ *(.gnu.warning)
+ *(.rodata .rodata.*)
+ *(.gnu.linkonce.t.*)
+ *(.glue_7)
+ *(.glue_7t)
+ *(.got)
+ *(.gcc_except_table)
+ *(.gnu.linkonce.r.*)
+ _etext = ABSOLUTE(.);
+ } > progmem
+
+ .init_section : {
+ _sinit = ABSOLUTE(.);
+ *(.init_array .init_array.*)
+ _einit = ABSOLUTE(.);
+ } > progmem
+
+ .ARM.extab : {
+ *(.ARM.extab*)
+ } > progmem
+
+ __exidx_start = ABSOLUTE(.);
+ .ARM.exidx : {
+ *(.ARM.exidx*)
+ } > progmem
+ __exidx_end = ABSOLUTE(.);
+
+ _eronly = ABSOLUTE(.);
+
+ .data : {
+ _sdata = ABSOLUTE(.);
+ *(.data .data.*)
+ *(.gnu.linkonce.d.*)
+ CONSTRUCTORS
+ _edata = ABSOLUTE(.);
+ } > datamem AT > progmem
+
+ .bss : { /* BSS */
+ _sbss = ABSOLUTE(.);
+ *(.bss .bss.*)
+ *(.gnu.linkonce.b.*)
+ *(COMMON)
+ _ebss = ABSOLUTE(.);
+ } > datamem
+ /* Stabs debugging sections. */
+ .stab 0 : { *(.stab) }
+ .stabstr 0 : { *(.stabstr) }
+ .stab.excl 0 : { *(.stab.excl) }
+ .stab.exclstr 0 : { *(.stab.exclstr) }
+ .stab.index 0 : { *(.stab.index) }
+ .stab.indexstr 0 : { *(.stab.indexstr) }
+ .comment 0 : { *(.comment) }
+ .debug_abbrev 0 : { *(.debug_abbrev) }
+ .debug_info 0 : { *(.debug_info) }
+ .debug_line 0 : { *(.debug_line) }
+ .debug_pubnames 0 : { *(.debug_pubnames) }
+ .debug_aranges 0 : { *(.debug_aranges) }
+}
diff --git a/configs/bambino-200e/scripts/spificonfig.ld b/configs/bambino-200e/scripts/spificonfig.ld
new file mode 100644
index 00000000000..283672e7e05
--- /dev/null
+++ b/configs/bambino-200e/scripts/spificonfig.ld
@@ -0,0 +1,147 @@
+/****************************************************************************
+ * configs/bambino-200e/scripts/spificonfig.ld
+ *
+ * Copyright (C) 2012 Gregory Nutt. All rights reserved.
+ * Author: Gregory Nutt
+ * Alan Carvalho de Assis acassis@gmail.com [nuttx]
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ * used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+/*
+ * Power-Up Reset Overview
+ * -----------------------
+ *
+ * The ARM core starts executing code on reset with the program counter set
+ * to 0x0000 0000. The LPC43xx contains a shadow pointer register that
+ * allows areas of memory to be mapped to address 0x0000 0000. The default,
+ * reset value of the shadow pointer is 0x1040 0000 so that on reset code in
+ * the boot ROM is always executed first.
+ *
+ * The boot starts after reset is released. The IRC is selected as CPU clock
+ * and the Cortex-M4 starts the boot loader. By default the JTAG access to the
+ * chip is disabled at reset. The boot ROM determines the boot mode based on
+ * the OTP BOOT_SRC value or reset state pins. For flash-based parts, the part
+ * boots from internal flash by default. Otherwse, the boot ROM copies the
+ * image to internal SRAM at location 0x1000 0000, sets the ARM's shadow
+ * pointer to 0x1000 0000, and jumps to that location.
+ *
+ * Of course, using JTAG the executable image can be also loaded directly
+ * into and executed from SRAM.
+ */
+
+/* The LPC4330 on the LPC4330-Xplorer has the following memory resources:
+ *
+ * 1. 4096Kb of SPIFI FLASH beginning at address 0x1400:0000
+ * 2. 264KB of total SRAM:
+ * a. 128KB of SRAM in the CPU block beginning at address 0x1000:0000
+ * b. 72KB beginning at address 0x1008:0000 and
+ * c. 64KB of AHB SRAM in three banks beginning at addresses 0x2000:0000,
+ * 0x2000:8000 and 0x2000:C000.
+ * 3. No internal FLASH
+ *
+ * Here we assume that:
+ *
+ * 1. We will be running out of SPIFI flash at 0x1400:0000, and
+ * 2. All .data and .bss will all fit into the 128KB CPU SRAM block.
+ */
+
+MEMORY
+{
+ progmem (rx) : ORIGIN = 0x14000000, LENGTH = 1024K
+ datamem (rwx) : ORIGIN = 0x10000000, LENGTH = 128K
+}
+
+OUTPUT_ARCH(arm)
+ENTRY(__start) /* Treat __start as the anchor for dead code stripping */
+EXTERN(_vectors) /* Force the vectors to be included in the output */
+SECTIONS
+{
+ .text : {
+ _stext = ABSOLUTE(.);
+ *(.vectors)
+ *(.text .text.*)
+ *(.fixup)
+ *(.gnu.warning)
+ *(.rodata .rodata.*)
+ *(.gnu.linkonce.t.*)
+ *(.glue_7)
+ *(.glue_7t)
+ *(.got)
+ *(.gcc_except_table)
+ *(.gnu.linkonce.r.*)
+ _etext = ABSOLUTE(.);
+ } > progmem
+
+ .init_section : {
+ _sinit = ABSOLUTE(.);
+ *(.init_array .init_array.*)
+ _einit = ABSOLUTE(.);
+ } > progmem
+
+ .ARM.extab : {
+ *(.ARM.extab*)
+ } > progmem
+
+ __exidx_start = ABSOLUTE(.);
+ .ARM.exidx : {
+ *(.ARM.exidx*)
+ } > progmem
+ __exidx_end = ABSOLUTE(.);
+
+ _eronly = ABSOLUTE(.);
+
+ .data : {
+ _sdata = ABSOLUTE(.);
+ *(.data .data.*)
+ *(.gnu.linkonce.d.*)
+ CONSTRUCTORS
+ _edata = ABSOLUTE(.);
+ } > datamem AT > progmem
+
+ .bss : { /* BSS */
+ _sbss = ABSOLUTE(.);
+ *(.bss .bss.*)
+ *(.gnu.linkonce.b.*)
+ *(COMMON)
+ _ebss = ABSOLUTE(.);
+ } > datamem
+ /* Stabs debugging sections. */
+ .stab 0 : { *(.stab) }
+ .stabstr 0 : { *(.stabstr) }
+ .stab.excl 0 : { *(.stab.excl) }
+ .stab.exclstr 0 : { *(.stab.exclstr) }
+ .stab.index 0 : { *(.stab.index) }
+ .stab.indexstr 0 : { *(.stab.indexstr) }
+ .comment 0 : { *(.comment) }
+ .debug_abbrev 0 : { *(.debug_abbrev) }
+ .debug_info 0 : { *(.debug_info) }
+ .debug_line 0 : { *(.debug_line) }
+ .debug_pubnames 0 : { *(.debug_pubnames) }
+ .debug_aranges 0 : { *(.debug_aranges) }
+}
diff --git a/configs/bambino-200e/src/.gitignore b/configs/bambino-200e/src/.gitignore
new file mode 100644
index 00000000000..726d936e1e3
--- /dev/null
+++ b/configs/bambino-200e/src/.gitignore
@@ -0,0 +1,2 @@
+/.depend
+/Make.dep
diff --git a/configs/bambino-200e/src/Makefile b/configs/bambino-200e/src/Makefile
new file mode 100644
index 00000000000..fa49acd1041
--- /dev/null
+++ b/configs/bambino-200e/src/Makefile
@@ -0,0 +1,82 @@
+############################################################################
+# configs/bambino-200e/src/Makefile
+#
+# Copyright (C) 2012 Gregory Nutt. All rights reserved.
+# Author: Gregory Nutt
+# Alan Carvalho de Assis acassis@gmail.com [nuttx]
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+# used to endorse or promote products derived from this software
+# without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+
+-include $(TOPDIR)/Make.defs
+
+ASRCS =
+CSRCS = lpc43_boot.c
+
+ifeq ($(CONFIG_LIB_BOARDCTL),y)
+CSRCS += lpc43_appinit.c
+endif
+
+ifeq ($(CONFIG_ARCH_FPU),y)
+CSRCS += lpc43_ostest.c
+endif
+
+ifeq ($(CONFIG_ARCH_LEDS),y)
+CSRCS += lpc43_autoleds.c
+else
+CSRCS += lpc43_userleds.c
+endif
+
+ifeq ($(CONFIG_ARCH_BUTTONS),y)
+CSRCS += lpc43_buttons.c
+endif
+
+ifeq ($(CONFIG_USBMSC),y)
+CSRCS += lpc43_usbmsc.c
+endif
+
+ifeq ($(CONFIG_SPIFI_LIBRARY),y)
+CFLAGS += -DEUROBIRD
+SPIFI_LIB = spifi_lib
+CSRCS += $(SPIFI_LIB)/spifi_rom_api.c
+#CSRCS += $(SPIFI_LIB)/amic.c
+#CSRCS += $(SPIFI_LIB)/atmel.c
+#CSRCS += $(SPIFI_LIB)/chi.c
+#CSRCS += $(SPIFI_LIB)/eon.c
+#CSRCS += $(SPIFI_LIB)/esmt.c
+#CSRCS += $(SPIFI_LIB)/esmt.c
+#CSRCS += $(SPIFI_LIB)/giga.c
+#CSRCS += $(SPIFI_LIB)/macronix.c
+#CSRCS += $(SPIFI_LIB)/numonyx.c
+CSRCS += $(SPIFI_LIB)/spansion.c
+#CSRCS += $(SPIFI_LIB)/sst.c
+CSRCS += $(SPIFI_LIB)/winbond.c
+endif
+
+include $(TOPDIR)/configs/Board.mk
diff --git a/configs/bambino-200e/src/bambino-200e.h b/configs/bambino-200e/src/bambino-200e.h
new file mode 100644
index 00000000000..2ec6d17479e
--- /dev/null
+++ b/configs/bambino-200e/src/bambino-200e.h
@@ -0,0 +1,127 @@
+/****************************************************************************
+ * configs/bambino-200e/src/bambino-200e.h
+ *
+ * Copyright (C) 2016 Gregory Nutt. All rights reserved.
+ * Author: Gregory Nutt
+ * Alan Carvalho de Assis acassis@gmail.com [nuttx]
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ * used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+#ifndef _CONFIGS_BAMBINO_200E_SRC_BAMBINO_H
+#define _CONFIGS_BAMBINO_200E_SRC_BAMBINO_H
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include
+#include
+
+#include "lpc43_pinconfig.h"
+#include "lpc43_gpio.h"
+
+/****************************************************************************
+ * Pre-processor Definitions
+ ****************************************************************************/
+
+/****************************************************************************
+ * LEDs GPIO PIN SIGNAL NAME
+ * -------------------------------- ------- --------------
+ * gpio3[7] - LED1 101 GPIO3[7]
+ * gpio5[5] - LED2 91 GPIO5[5]
+ *
+ ****************************************************************************/
+
+/* Definitions to configure LED pins as GPIOs:
+ *
+ * - Floating
+ * - Normal drive
+ * - No buffering, glitch filtering, slew=slow
+ */
+
+#define PINCONFIG_LED1 PINCONF_GPIO3p7
+#define PINCONFIG_LED2 PINCONF_GPIO5p5
+#define GPIO_LED1 (GPIO_MODE_OUTPUT | GPIO_VALUE_ONE | GPIO_PORT3 | GPIO_PIN7)
+#define GPIO_LED2 (GPIO_MODE_OUTPUT | GPIO_VALUE_ONE | GPIO_PORT5 | GPIO_PIN5)
+
+/****************************************************************************
+ * Buttons GPIO
+ * ----------------------------
+ * gpio0[7] - User Button USR1
+ ****************************************************************************/
+
+#define BAMBINO_BUT1 (GPIO_INTBOTH | GPIO_FLOAT | GPIO_PORT0 | GPIO_PIN7)
+
+/* Button IRQ numbers */
+
+#define BAMBINO_BUT1_IRQ LPC43_IRQ_P0p23
+
+#define GPIO_SSP0_SCK GPIO_SSP0_SCK_1
+#define GPIO_SSP0_SSEL GPIO_SSP0_SSEL_1
+#define GPIO_SSP0_MISO GPIO_SSP0_MISO_1
+#define GPIO_SSP0_MOSI GPIO_SSP0_MOSI_1
+
+/* We need to redefine USB_PWRD as GPIO to get USB Host working
+ * Also remember to add 2 resistors of 15K to D+ and D- pins.
+ */
+
+#ifdef CONFIG_USBHOST
+# ifdef GPIO_USB_PWRD
+# undef GPIO_USB_PWRD
+# define GPIO_USB_PWRD (GPIO_INPUT | GPIO_PORT1 | GPIO_PIN22)
+# endif
+#endif
+
+/****************************************************************************
+ * Public Types
+ ****************************************************************************/
+
+/****************************************************************************
+ * Public data
+ ****************************************************************************/
+
+#ifndef __ASSEMBLY__
+
+/****************************************************************************
+ * Public Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: lpc43_sspdev_initialize
+ *
+ * Description:
+ * Called to configure SPI chip select GPIO pins for the Lincoln 80 board.
+ *
+ ****************************************************************************/
+
+void weak_function lpc43_sspdev_initialize(void);
+
+#endif /* __ASSEMBLY__ */
+#endif /* _CONFIGS_BAMBINO_200E_SRC_BAMBINO_H */
diff --git a/configs/bambino-200e/src/lpc43_appinit.c b/configs/bambino-200e/src/lpc43_appinit.c
new file mode 100644
index 00000000000..eae609cf2e0
--- /dev/null
+++ b/configs/bambino-200e/src/lpc43_appinit.c
@@ -0,0 +1,166 @@
+/****************************************************************************
+ * config/bambino-200e/src/lpc43_appinit.c
+ *
+ * Copyright (C) 2016 Gregory Nutt. All rights reserved.
+ * Author: Gregory Nutt
+ * Alan Carvalho de Assis acassis@gmail.com [nuttx]
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ * used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include
+
+#include
+#include
+#include
+
+#include
+
+#include "chip.h"
+
+#ifdef CONFIG_LPC43_SPIFI
+# include
+# include "lpc43_spifi.h"
+
+# ifdef CONFIG_SPFI_NXFFS
+# include
+# include
+# endif
+#endif
+
+/****************************************************************************
+ * Pre-processor Definitions
+ ****************************************************************************/
+
+/* Configuration ************************************************************/
+
+#ifndef CONFIG_SPIFI_DEVNO
+# define CONFIG_SPIFI_DEVNO 0
+#endif
+
+/****************************************************************************
+ * Private Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: nsh_spifi_initialize
+ *
+ * Description:
+ * Make the SPIFI (or part of it) into a block driver that can hold a
+ * file system.
+ *
+ ****************************************************************************/
+
+#ifdef CONFIG_LPC43_SPIFI
+static int nsh_spifi_initialize(void)
+{
+ FAR struct mtd_dev_s *mtd;
+ int ret;
+
+ /* Initialize the SPIFI interface and create the MTD driver instance */
+
+ mtd = lpc43_spifi_initialize();
+ if (!mtd)
+ {
+ ferr("ERROR: lpc43_spifi_initialize failed\n");
+ return -ENODEV;
+ }
+
+#ifndef CONFIG_SPFI_NXFFS
+ /* And finally, use the FTL layer to wrap the MTD driver as a block driver */
+
+ ret = ftl_initialize(CONFIG_SPIFI_DEVNO, mtd);
+ if (ret < 0)
+ {
+ ferr("ERROR: Initializing the FTL layer: %d\n", ret);
+ return ret;
+ }
+#else
+ /* Initialize to provide NXFFS on the MTD interface */
+
+ ret = nxffs_initialize(mtd);
+ if (ret < 0)
+ {
+ ferr("ERROR: NXFFS initialization failed: %d\n", ret);
+ return ret;
+ }
+
+ /* Mount the file system at /mnt/spifi */
+
+ ret = mount(NULL, "/mnt/spifi", "nxffs", 0, NULL);
+ if (ret < 0)
+ {
+ ferr("ERROR: Failed to mount the NXFFS volume: %d\n", errno);
+ return ret;
+ }
+#endif
+
+ return OK;
+}
+#else
+# define nsh_spifi_initialize() (OK)
+#endif
+
+/****************************************************************************
+ * Public Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: board_app_initialize
+ *
+ * Description:
+ * Perform architecture specific initialization
+ *
+ * Input Parameters:
+ * arg - The boardctl() argument is passed to the board_app_initialize()
+ * implementation without modification. The argument has no
+ * meaning to NuttX; the meaning of the argument is a contract
+ * between the board-specific initalization logic and the the
+ * matching application logic. The value cold be such things as a
+ * mode enumeration value, a set of DIP switch switch settings, a
+ * pointer to configuration data read from a file or serial FLASH,
+ * or whatever you would like to do with it. Every implementation
+ * should accept zero/NULL as a default configuration.
+ *
+ * Returned Value:
+ * Zero (OK) is returned on success; a negated errno value is returned on
+ * any failure to indicate the nature of the failure.
+ *
+ ****************************************************************************/
+
+int board_app_initialize(uintptr_t arg)
+{
+ /* Initialize the SPIFI block device */
+
+ return nsh_spifi_initialize();
+}
diff --git a/configs/bambino-200e/src/lpc43_autoleds.c b/configs/bambino-200e/src/lpc43_autoleds.c
new file mode 100644
index 00000000000..5fe074b10ee
--- /dev/null
+++ b/configs/bambino-200e/src/lpc43_autoleds.c
@@ -0,0 +1,177 @@
+/****************************************************************************
+ * configs/bambino-200e/src/lpc43_autoleds.c
+ *
+ * Copyright (C) 2016 Gregory Nutt. All rights reserved.
+ * Author: Gregory Nutt
+ * Alan Carvalho de Assis acassis@gmail.com [nuttx]
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ * used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include
+
+#include
+#include
+#include
+
+#include
+#include
+
+#include "chip.h"
+#include "up_arch.h"
+#include "up_internal.h"
+
+#include "bambino-200e.h"
+
+#ifdef CONFIG_ARCH_LEDS
+
+/* LED definitions **********************************************************/
+/* The LPC4330-Xplorer has 2 user-controllable LEDs labeled D2 an D3 in the
+ * schematic and on but referred to has LED1 and LED2 here, respectively.
+ *
+ * LED1 D2 GPIO1[12]
+ * LED2 D3 GPIO1[11]
+ *
+ * LEDs are pulled high to a low output illuminates the LED.
+ *
+ * If CONFIG_ARCH_LEDS is defined, the LEDs will be controlled as follows
+ * for NuttX debug functionality (where NC means "No Change").
+ *
+ * ON OFF
+ * LED1 LED2 LED1 LED2
+ * LED_STARTED 0 OFF OFF - -
+ * LED_HEAPALLOCATE 1 ON OFF - -
+ * LED_IRQSENABLED 1 ON OFF - -
+ * LED_STACKCREATED 1 ON OFF - -
+ * LED_INIRQ 2 NC ON NC OFF
+ * LED_SIGNAL 2 NC ON NC OFF
+ * LED_ASSERTION 2 NC ON NC OFF
+ * LED_PANIC 2 NC ON NC OFF
+ *
+ * If CONFIG_ARCH_LEDS is not defined, then the LEDs are completely under
+ * control of the application. The following interfaces are then available
+ * for application control of the LEDs:
+ *
+ * void board_userled_initialize(void);
+ * void board_userled(int led, bool ledon);
+ * void board_userled_all(uint8_t ledset);
+ */
+
+/****************************************************************************
+ * Private Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: led_dumppins
+ ****************************************************************************/
+
+#ifdef LED_VERBOSE
+static void led_dumppins(FAR const char *msg)
+{
+ lpc43_pin_dump(PINCONFIG_LED1, msg);
+ lpc43_gpio_dump(GPIO_LED2, msg);
+}
+#else
+# define led_dumppins(m)
+#endif
+
+/****************************************************************************
+ * Public Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: board_autoled_initialize
+ ****************************************************************************/
+
+void board_autoled_initialize(void)
+{
+ /* Configure all LED pins as GPIO outputs */
+
+ led_dumppins("board_autoled_initialize() Entry)");
+
+ /* Configure LED pins as GPIOs, then configure GPIOs as outputs */
+
+ lpc43_pin_config(PINCONFIG_LED1);
+ lpc43_gpio_config(GPIO_LED1);
+
+ lpc43_pin_config(PINCONFIG_LED2);
+ lpc43_gpio_config(GPIO_LED2);
+
+ led_dumppins("board_autoled_initialize() Exit");
+}
+
+/****************************************************************************
+ * Name: board_autoled_on
+ ****************************************************************************/
+
+void board_autoled_on(int led)
+{
+ switch (led)
+ {
+ default:
+ case 0:
+ lpc43_gpio_write(GPIO_LED1, true); /* LED1 OFF */
+ lpc43_gpio_write(GPIO_LED2, true); /* LED2 OFF */
+ break;
+
+ case 1:
+ lpc43_gpio_write(GPIO_LED1, false); /* LED1 ON */
+ lpc43_gpio_write(GPIO_LED2, true); /* LED2 OFF */
+ break;
+
+ case 2:
+ lpc43_gpio_write(GPIO_LED2, false); /* LED2 ON */
+ break;
+ }
+}
+
+/****************************************************************************
+ * Name: board_autoled_off
+ ****************************************************************************/
+
+void board_autoled_off(int led)
+{
+ switch (led)
+ {
+ default:
+ case 0:
+ case 1:
+ break;
+
+ case 2:
+ lpc43_gpio_write(GPIO_LED2, true); /* LED2 OFF */
+ break;
+ }
+}
+
+#endif /* CONFIG_ARCH_LEDS */
diff --git a/configs/bambino-200e/src/lpc43_boot.c b/configs/bambino-200e/src/lpc43_boot.c
new file mode 100644
index 00000000000..10c4237effd
--- /dev/null
+++ b/configs/bambino-200e/src/lpc43_boot.c
@@ -0,0 +1,74 @@
+/************************************************************************************
+ * configs/bambino-200e/src/lpc43_boot.c
+ *
+ * Copyright (C) 2016 Gregory Nutt. All rights reserved.
+ * Author: Gregory Nutt
+ * Alan Carvalho de Assis acassis@gmail.com [nuttx]
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ * used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************************************/
+
+/************************************************************************************
+ * Included Files
+ ************************************************************************************/
+
+#include
+
+#include
+
+#include
+#include
+
+#include "up_arch.h"
+#include "up_internal.h"
+
+#include "bambino-200e.h"
+
+/************************************************************************************
+ * Public Functions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Name: lpc43_boardinitialize
+ *
+ * Description:
+ * All LPC43xx architectures must provide the following entry point. This entry point
+ * is called early in the intitialization -- after all memory has been configured
+ * and mapped but before any devices have been initialized.
+ *
+ ************************************************************************************/
+
+void lpc43_boardinitialize(void)
+{
+ /* Configure on-board LEDs if LED support has been selected. */
+
+#ifdef CONFIG_ARCH_LEDS
+ board_autoled_initialize();
+#endif
+}
diff --git a/configs/bambino-200e/src/lpc43_buttons.c b/configs/bambino-200e/src/lpc43_buttons.c
new file mode 100644
index 00000000000..95755ccb791
--- /dev/null
+++ b/configs/bambino-200e/src/lpc43_buttons.c
@@ -0,0 +1,220 @@
+/****************************************************************************
+ * configs/bambino-200e/src/lpc43_buttons.c
+ *
+ * Copyright (C) 2016 Gregory Nutt. All rights reserved.
+ * Author: Gregory Nutt
+ * Alan Carvalho de Assis acassis@gmail.com [nuttx]
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ * used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include
+
+#include
+#include
+
+#include
+#include
+#include
+
+#include
+
+#include "bambino-200e.h"
+
+#ifdef CONFIG_ARCH_BUTTONS
+
+/****************************************************************************
+ * Private Data
+ ****************************************************************************/
+
+/* Pin configuration for each LPC4330 Xplorer button. This array is indexed
+ * by the BUTTON_* definitions in board.h
+ */
+
+static const uint16_t g_buttoncfg[BOARD_NUM_BUTTONS] =
+{
+ BAMBINO_BUT1
+};
+
+/* This array defines all of the interrupt handlers current attached to
+ * button events.
+ */
+
+#if defined(CONFIG_ARCH_IRQBUTTONS) && defined(CONFIG_LPC43_GPIO_IRQ)
+static xcpt_t g_buttonisr[BOARD_NUM_BUTTONS];
+
+/* This array provides the mapping from button ID numbers to button IRQ
+ * numbers.
+ */
+
+static uint8_t g_buttonirq[BOARD_NUM_BUTTONS] =
+{
+ BAMBINO_BUT1_IRQ
+};
+#endif
+
+/****************************************************************************
+ * Public Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: board_button_initialize
+ *
+ * Description:
+ * board_button_initialize() must be called to initialize button resources.
+ * After that, board_buttons() may be called to collect the current state
+ * of all buttons or board_button_irq() may be called to register button
+ * interrupt handlers.
+ *
+ ****************************************************************************/
+
+void board_button_initialize(void)
+{
+ int i;
+
+ /* Configure the GPIO pins as interrupting inputs. */
+
+ for (i = 0; i < BOARD_NUM_BUTTONS; i++)
+ {
+ lpc43_configgpio(g_buttoncfg[i]);
+ }
+}
+
+/****************************************************************************
+ * Name: board_buttons
+ *
+ * Description:
+ * board_button_initialize() must be called to initialize button resources. After
+ * that, board_buttons() may be called to collect the current state of all
+ * buttons.
+ *
+ * board_buttons() may be called at any time to harvest the state of every
+ * button. The state of the buttons is returned as a bitset with one
+ * bit corresponding to each button: If the bit is set, then the button
+ * is pressed. See the BOARD_BUTTON_*_BIT and BOARD_JOYSTICK_*_BIT
+ * definitions in board.h for the meaning of each bit.
+ *
+ ****************************************************************************/
+
+uint8_t board_buttons(void)
+{
+ uint8_t ret = 0;
+ int i;
+
+ /* Check that state of each key */
+
+ for (i = 0; i < BOARD_NUM_BUTTONS; i++)
+ {
+ /* A LOW value means that the key is pressed. */
+
+ bool released = lpc43_gpio_read(g_buttoncfg[i]);
+
+ /* Accumulate the set of depressed (not released) keys */
+
+ if (!released)
+ {
+ ret |= (1 << i);
+ }
+ }
+
+ return ret;
+}
+
+/****************************************************************************
+ * Button support.
+ *
+ * Description:
+ * board_button_initialize() must be called to initialize button resources. After
+ * that, board_button_irq() may be called to register button interrupt handlers.
+ *
+ * board_button_irq() may be called to register an interrupt handler that will
+ * be called when a button is depressed or released. The ID value is a
+ * button enumeration value that uniquely identifies a button resource. See the
+ * BOARD_BUTTON_* and BOARD_JOYSTICK_* definitions in board.h for the meaning
+ * of enumeration values. The previous interrupt handler address is returned
+ * (so that it may restored, if so desired).
+ *
+ * Note that board_button_irq() also enables button interrupts. Button
+ * interrupts will remain enabled after the interrupt handler is attached.
+ * Interrupts may be disabled (and detached) by calling board_button_irq with
+ * irqhandler equal to NULL.
+ *
+ ****************************************************************************/
+
+#if defined(CONFIG_ARCH_IRQBUTTONS) && defined(CONFIG_LPC43_GPIO_IRQ)
+xcpt_t board_button_irq(int id, xcpt_t irqhandler)
+{
+ xcpt_t oldhandler = NULL;
+ irqstate_t flags;
+ int irq;
+
+ /* Verify that the button ID is within range */
+
+ if ((unsigned)id < BOARD_NUM_BUTTONS)
+ {
+ /* Return the current button handler and set the new interrupt handler */
+
+ oldhandler = g_buttonisr[id];
+ g_buttonisr[id] = irqhandler;
+
+ /* Disable interrupts until we are done */
+
+ flags = enter_critical_section();
+
+ /* Configure the interrupt. Either attach and enable the new
+ * interrupt or disable and detach the old interrupt handler.
+ */
+
+ irq = g_buttonirq[id];
+ if (irqhandler)
+ {
+ /* Attach then enable the new interrupt handler */
+
+ (void)irq_attach(irq, irqhandler);
+ up_enable_irq(irq);
+ }
+ else
+ {
+ /* Disable then detach the old interrupt handler */
+
+ up_disable_irq(irq);
+ (void)irq_detach(irq);
+ }
+ leave_critical_section(flags);
+ }
+
+ return oldhandler;
+}
+#endif
+
+#endif /* CONFIG_ARCH_BUTTONS */
diff --git a/configs/bambino-200e/src/lpc43_ostest.c b/configs/bambino-200e/src/lpc43_ostest.c
new file mode 100644
index 00000000000..5be6241373d
--- /dev/null
+++ b/configs/bambino-200e/src/lpc43_ostest.c
@@ -0,0 +1,112 @@
+/************************************************************************************
+ * configs/bambino-200e/src/lpc43_ostest.c
+ *
+ * Copyright (C) 2016 Gregory Nutt. All rights reserved.
+ * Author: Gregory Nutt
+ * Alan Carvalho de Assis acassis@gmail.com [nuttx]
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ * used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************************************/
+
+/************************************************************************************
+ * Included Files
+ ************************************************************************************/
+
+#include
+
+#include
+#include
+#include
+#include
+
+#include
+#include
+
+#include "up_arch.h"
+#include "up_internal.h"
+#include "bambino-200e.h"
+
+/************************************************************************************
+ * Pre-processor Definitions
+ ************************************************************************************/
+
+/* Configuration ********************************************************************/
+
+#undef HAVE_FPU
+#if defined(CONFIG_ARCH_FPU) && defined(CONFIG_EXAMPLES_OSTEST_FPUSIZE) && \
+ defined(CONFIG_SCHED_WAITPID) && !defined(CONFIG_DISABLE_SIGNALS) && \
+ !defined(CONFIG_ARMV7M_CMNVECTOR)
+# define HAVE_FPU 1
+#endif
+
+#ifdef HAVE_FPU
+
+#if CONFIG_EXAMPLES_OSTEST_FPUSIZE != (4*SW_FPU_REGS)
+# error "CONFIG_EXAMPLES_OSTEST_FPUSIZE has the wrong size"
+#endif
+
+/************************************************************************************
+ * Private Data
+ ************************************************************************************/
+
+static uint32_t g_saveregs[XCPTCONTEXT_REGS];
+
+/************************************************************************************
+ * Public Functions
+ ************************************************************************************/
+
+/* Given an array of size CONFIG_EXAMPLES_OSTEST_FPUSIZE, this function will return
+ * the current FPU registers.
+ */
+
+void arch_getfpu(FAR uint32_t *fpusave)
+{
+ irqstate_t flags;
+
+ /* Take a snapshot of the thread context right now */
+
+ flags = enter_critical_section();
+ up_saveusercontext(g_saveregs);
+
+ /* Return only the floating register values */
+
+ memcpy(fpusave, &g_saveregs[REG_S0], (4*SW_FPU_REGS));
+ leave_critical_section(flags);
+}
+
+/* Given two arrays of size CONFIG_EXAMPLES_OSTEST_FPUSIZE this function
+ * will compare them and return true if they are identical.
+ */
+
+bool arch_cmpfpu(FAR const uint32_t *fpusave1, FAR const uint32_t *fpusave2)
+{
+ return memcmp(fpusave1, fpusave2, (4*SW_FPU_REGS)) == 0;
+}
+
+#endif /* HAVE_FPU */
diff --git a/configs/bambino-200e/src/lpc43_userleds.c b/configs/bambino-200e/src/lpc43_userleds.c
new file mode 100644
index 00000000000..46f223f675c
--- /dev/null
+++ b/configs/bambino-200e/src/lpc43_userleds.c
@@ -0,0 +1,134 @@
+/****************************************************************************
+ * configs/bambino-200e/src/lpc43_userleds.c
+ *
+ * Copyright (C) 2016 Gregory Nutt. All rights reserved.
+ * Author: Gregory Nutt
+ * Alan Carvalho de Assis acassis@gmail.com [nuttx]
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ * used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include
+
+#include
+#include
+#include
+
+#include
+
+#include "chip.h"
+#include "up_arch.h"
+#include "up_internal.h"
+
+#include "bambino-200e.h"
+
+#ifndef CONFIG_ARCH_LEDS
+
+/****************************************************************************
+ * Pre-processor Definitions
+ ****************************************************************************/
+
+/* LED definitions **********************************************************/
+/* The LPC4330-Xplorer has 2 user-controllable LEDs labeled D2 an D3 in the
+ * schematic and on but referred to has LED1 and LED2 here, respectively.
+ *
+ * LED1 D2 GPIO1[12]
+ * LED2 D3 GPIO1[11]
+ *
+ * LEDs are pulled high to a low output illuminates the LED.
+ */
+
+/****************************************************************************
+ * Private Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: led_dumppins
+ ****************************************************************************/
+
+#ifdef LED_VERBOSE
+static void led_dumppins(FAR const char *msg)
+{
+ lpc43_pin_dump(PINCONFIG_LED1, msg);
+ lpc43_gpio_dump(GPIO_LED2, msg);
+}
+#else
+# define led_dumppins(m)
+#endif
+
+/****************************************************************************
+ * Public Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: board_userled_initialize
+ ****************************************************************************/
+
+void board_userled_initialize(void)
+{
+ /* Configure all LED GPIO lines */
+
+ led_dumppins("board_userled_initialize() Entry)");
+
+ /* Configure LED pins as GPIOs, then configure GPIOs as outputs */
+
+ lpc43_pin_config(PINCONFIG_LED1);
+ lpc43_gpio_config(GPIO_LED1);
+
+ lpc43_pin_config(PINCONFIG_LED2);
+ lpc43_gpio_config(GPIO_LED2);
+
+ led_dumppins("board_userled_initialize() Exit");
+}
+
+/****************************************************************************
+ * Name: board_userled
+ ****************************************************************************/
+
+void board_userled(int led, bool ledon)
+{
+ uint16_t gpiocfg = (led == BOARD_LED1 ? GPIO_LED1 : GPIO_LED2);
+ lpc43_gpio_write(gpiocfg, !ledon);
+}
+
+/****************************************************************************
+ * Name: board_userled_all
+ ****************************************************************************/
+
+void board_userled_all(uint8_t ledset)
+{
+ lpc43_gpio_write(GPIO_LED1, (ledset & BOARD_LED1_BIT) == 0);
+ lpc43_gpio_write(GPIO_LED2, (ledset & BOARD_LED2_BIT) == 0);
+}
+
+#endif /* !CONFIG_ARCH_LEDS */