Prep for NuttX-7.17 release

ChangeLog

@@ -11878,7 +11878,7 @@
 	* arch/arm/src/samv7: Fix missing unlock of device in MCAN
 	  mcan_txempty().  From Frank Benkert (2016-06-01).
 
-7.17 2016-xx-xx Gregory Nutt <gnutt@nuttx.org>
+7.17 2016-07-25 Gregory Nutt <gnutt@nuttx.org>
 
 	* drivers/mtd/flash_eraseall.c:  Removed.  This is no longer used
 	  in the OS and is simply a wrapper around the MDIOC_BULKERASE
@@ -11917,27 +11917,16 @@
 	* arch/arm/src/stm32:  Add support for the STM32F105R.  From Konstantin
 	  Berezenko  (2016-06-06).
 	* include/signal.h:  Change type of SIG_ERR, SIG_IGN, ... to
-	  _sa_handler_t.  They type void does not work with the IAR toolchain.
+	  _sa_handler_t.  The type void does not work with the IAR toolchain.
 	  From Aleksandr Vyhovanec (2016-06-07).
-	* arch/arm/src/stm32f7 and include/stm32f7:  Added STM32FF76xxx and
-	  STM32FF7xx families. From David Sidrane (2016-06-08).
-	* Refactoring configs/nucleo-144 sub-directories to support additional
-	  nucleo-144 board.  Add support for the Nucleo-F767ZI board. From David
-	  Sidrane (2016-06-08).
-	* arch/arm/src/kinetis: Add a USB device controller driver for kinetis.
-	  Derived from pic32mx usb driver, which uses the same usb controller.
-	  From kfazz (2016-06-06).
-	* configs/teensy-3.x:  Add USB device support and usbnsh configuration.
-	  From kfazz (2016-06-06.
-	* arch/arm/src/stm32:  Add STM32F105R support.  From Konstantin Berezenko
-	  (2016-06-06).
-	* include/signal.h:  Change type of SIG_IGN and related defines to
-	  _sa_handler_t.  From Aleksandr Vyhovanec (2016-06-07).
 	* configs/nucleo-144: Refactored configs/nucleo-144 sub-directories to
 	  support additional nucleo-144 board.  Add support for the Nucleo-F767ZI
 	  board.  From David Sidrane (2016-06-07).
-	* arch/arm/src/stm32f7: Add support for STM32FF76xxx and STM32FF7xx
+	* arch/arm/src/stm32f7 and include/stm32f7:  Added STM32F76xxx and
-	  families.  From David Sidrane (2016-06-08).
+	  STM32F77xx families. From David Sidrane (2016-06-08).
+	* Refactoring configs/nucleo-144 sub-directories to support additional
+	  nucleo-144 board.  Add support for the Nucleo-F767ZI board. From David
+	  Sidrane (2016-06-08).
 	* include/assert.h: Check if NDEBUG is defined.  From Paul Alexander
 	  Patience (2016-06-08).
 	* arch/arm/src/stm32: Fix STM32 DMA code and configuration for STM32F37X
@@ -11958,25 +11947,10 @@
 	  and the full packet length, need to subtract the size of the link
 	  layer header before making the comparison or we will get false
 	  positives (i.e., the packet is really too small) (2016-06-09)
-	* drivers/mtd: Added driver of IS25xP SPI flash devices.  Based on
-	  sst25xx driver. From Marten Svanfeldt (2016-06-09).
-	* arch/arm/src/kinetis:  Teensy clock fixes.  The High Gain bit in
-	  MCG_C1 was preventing teensy from booting except after a programming
-	  session. The second change doesn't appear to change any functionality,
-	  but complies with restrictions in the k20  family reference manual on
-	  FEI -> FBE clock transiions.  From kfazz (2016-06-09).
-	* arch/arm/src/stm32: Fix timer input clock definitions.  From David
-	  Sidrane (2016-06-09).
 	* configs/: All configurations that have both CONFIG_NSH_LIBRARY=y and
 	  CONFIG_NET=y must now also have CONFIG_NSH_NETINIT=y (2016-06-09).
 	* arch/arm/src/kinetis: Kinetis pwm support, based on kl_pwm driver.
 	  From kfazz (2016-06-09).
-	* net/: In both IPv6 and IPv4 incoming logic:  (1) Should check if the
-	  packet size is large enough before trying to access the packet length
-	  in the IP header.  (2) In the comparison between the IP length and the
-	  full packet length, need to subtract the size of the link layer header
-	  before making the comparison or we will get false positives (i.e., the
-	  packet is really too small) (2016-06-09).
 	* arch/srm/src/stm32: Fix compilation errors in debug mode of
 	  stm32_pwm.c.  From Konstantin Berezenko (2016-06-09).
 	* arch/arm/src/kinetis: Support up to 8 channels per timer.  From kfazz
@@ -12212,7 +12186,7 @@
 	  style symbolic links.
 	  The fix here is to also execute the clean_context AFTER executing
 	  menuconfig.  A lot more happens now:  It used to be that doing 'make
-	  menuconfig' only did the menuconfig operation.  No it does context,
+	  menuconfig' only did the menuconfig operation.  Now it does context,
 	  pre_config, menuconfig, clean_context.  Not nearly as snappy as it used
 	  to be (2016-06-28).
 	* arch/arm/src/efm32, lcp43, stm32, stm32l4: disable interrupts with
@@ -12377,11 +12351,11 @@
 	  Pettit (2016-07-14).
 	* arch/arm/src/lpc32xx: Extend LPC43xx EMC code to support SDRAM on a
 	  dynamic memory interface.  From Vytautas Lukenskas (2016-07-19).
-	* arch/srim/src:  Add the simulated QSPI (N25Q) flash to the simulation
+	* arch/sim/src:  Add the simulated QSPI (N25Q) flash to the simulation
 	  and modify sim up_spiflash.c to enable it to run with different MTD
 	  drivers based on config options (currently m25p, sst26 and w25).
 	  From Ken Pettit (2016-07-19).
-	* drivers/pipe:  Add support to allocated different sizes for pipe and
+	* drivers/pipe:  Add support to allocating different sizes for pipe and
 	  fifo buffers.  Adds mkfifo2() and pipe2() which are just like mkfifo()
 	  and pipe(), but allow control of the size of the underlying, in-memory
 	  circular buffer .  Move pipe() and mkpipe() to nuttx/libc, they are no
@@ -12418,3 +12392,5 @@
 	  banks.  This fixes a race condition where the HW fills a FIFO bank
 	  while the SW is busy, resulting in out of sequence USB packets
 	  (2016-07-23).
+
+7.18 2016-xx-xx Gregory Nutt <gnutt@nuttx.org>