Repairs needed after Kconfig changes for LPC31

git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5105 42af7a65-404d-4744-a932-0658087f49c3

configs/ea3131/README.txt

@@ -43,12 +43,12 @@ GNU Toolchain Options
   add one of the following configuration options to your .config (or defconfig)
   file:
 
-    CONFIG_LPC31XX_CODESOURCERYW=y  : CodeSourcery under Windows
+    CONFIG_LPC31_CODESOURCERYW=y  : CodeSourcery under Windows
-    CONFIG_LPC31XX_CODESOURCERYL=y  : CodeSourcery under Linux
+    CONFIG_LPC31_CODESOURCERYL=y  : CodeSourcery under Linux
-    CONFIG_LPC31XX_DEVKITARM=y      : devkitARM under Windows
+    CONFIG_LPC31_DEVKITARM=y      : devkitARM under Windows
-    CONFIG_LPC31XX_BUILDROOT=y	    : NuttX buildroot under Linux or Cygwin (default)
+    CONFIG_LPC31_BUILDROOT=y	    : NuttX buildroot under Linux or Cygwin (default)
 
-  If you are not using CONFIG_LPC31XX_BUILDROOT, then you may also have to modify
+  If you are not using CONFIG_LPC31_BUILDROOT, then you may also have to modify
   the PATH in the setenv.h file if your make cannot find the tools.
 
   NOTE: the CodeSourcery (for Windows), devkitARM, and Raisonance toolchains are
@@ -381,7 +381,7 @@ On-Demand Paging
   configs/ea3131/locked/Makefile to build the first pass object, locked.r.
   This first pass object contains all of the code that must be in the locked
   text region. The Makefile in arch/arm/src/Makefile then includes this 1st
-  pass in build, positioning it as controlled by configs/ea3131/pgnsh/ld.script.
+  pass in build, positioning it as controlled by configs/ea3131/scripts/pg-ld.script.
 
   Finishing the Example:
   ----------------------
@@ -549,27 +549,27 @@ ARM/EA3131-specific Configuration Options
 
   Individual subsystems can be enabled:
 
-	CONFIG_LPC31XX_MCI, CONFIG_LPC31XX_SPI, CONFIG_LPC31XX_UART
+	CONFIG_LPC31_MCI, CONFIG_LPC31_SPI, CONFIG_LPC31_UART
 
   External memory available on the board (see also CONFIG_MM_REGIONS)
 
-	CONFIG_LPC31XX_EXTSRAM0 - Select if external SRAM0 is present
+	CONFIG_LPC31_EXTSRAM0 - Select if external SRAM0 is present
-	CONFIG_LPC31XX_EXTSRAM0HEAP - Select if external SRAM0 should be
+	CONFIG_LPC31_EXTSRAM0HEAP - Select if external SRAM0 should be
 	  configured as part of the NuttX heap.
-	CONFIG_LPC31XX_EXTSRAM0SIZE - Size (in bytes) of the installed
+	CONFIG_LPC31_EXTSRAM0SIZE - Size (in bytes) of the installed
 	  external SRAM0 memory
-	CONFIG_LPC31XX_EXTSRAM1 - Select if external SRAM1 is present
+	CONFIG_LPC31_EXTSRAM1 - Select if external SRAM1 is present
-	CONFIG_LPC31XX_EXTSRAM1HEAP - Select if external SRAM1 should be
+	CONFIG_LPC31_EXTSRAM1HEAP - Select if external SRAM1 should be
 	  configured as part of the NuttX heap.
-	CONFIG_LPC31XX_EXTSRAM1SIZE - Size (in bytes) of the installed
+	CONFIG_LPC31_EXTSRAM1SIZE - Size (in bytes) of the installed
 	  external SRAM1 memory
-	CONFIG_LPC31XX_EXTSDRAM - Select if external SDRAM is present
+	CONFIG_LPC31_EXTSDRAM - Select if external SDRAM is present
-	CONFIG_LPC31XX_EXTSDRAMHEAP - Select if external SDRAM should be
+	CONFIG_LPC31_EXTSDRAMHEAP - Select if external SDRAM should be
 	  configured as part of the NuttX heap.
-	CONFIG_LPC31XX_EXTSDRAMSIZE - Size (in bytes) of the installed
+	CONFIG_LPC31_EXTSDRAMSIZE - Size (in bytes) of the installed
 	  external SDRAM memory
-	CONFIG_LPC31XX_EXTNAND - Select if external NAND is present
+	CONFIG_LPC31_EXTNAND - Select if external NAND is present
-	CONFIG_LPC31XX_EXTSDRAMSIZE - Size (in bytes) of the installed
+	CONFIG_LPC31_EXTSDRAMSIZE - Size (in bytes) of the installed
 	  external NAND memory
 
   LPC313X specific device driver settings

configs/ea3131/locked/mklocked.sh

@@ -2,8 +2,8 @@
 ###########################################################################
 # configs/ea3131/locked/mklocked.sh
 #
-#   Copyright (C) 2010-2011 Gregory Nutt. All rights reserved.
+#   Copyright (C) 2010-2012 Gregory Nutt. All rights reserved.
-#   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+#   Author: Gregory Nutt <gnutt@nuttx.org>
 #
 # Redistribution and use in source and binary forms, with or without
 # modification, are permitted provided that the following conditions
@@ -117,7 +117,7 @@ echo "EXTERN(up_vectoraddrexcptn)" >>ld-locked.inc
 
 echo "EXTERN(up_timerinit)" >>ld-locked.inc
 
-answer=$(checkconfig CONFIG_LPC31XX_UART)
+answer=$(checkconfig CONFIG_LPC31_UART)
 if [ $answer = y ]; then
 	echo "EXTERN(up_earlyserialinit)" >>ld-locked.inc
 fi

configs/ea3131/nsh/Make.defs

@@ -38,23 +38,23 @@ include ${TOPDIR}/tools/Config.mk
 
 # Setup for the selected toolchain
 
-ifeq ($(CONFIG_LPC31XX_CODESOURCERYW),y)
+ifeq ($(CONFIG_LPC31_CODESOURCERYW),y)
   # CodeSourcery under Windows
   CROSSDEV = arm-none-eabi-
   WINTOOL = y
   MAXOPTIMIZATION = -O2
 endif
-ifeq ($(CONFIG_LPC31XX_CODESOURCERYL),y)
+ifeq ($(CONFIG_LPC31_CODESOURCERYL),y)
   # CodeSourcery under Linux
   CROSSDEV = arm-none-eabi-
   MAXOPTIMIZATION = -O2
 endif
-ifeq ($(CONFIG_LPC31XX_DEVKITARM),y)
+ifeq ($(CONFIG_LPC31_DEVKITARM),y)
   # devkitARM under Windows
   CROSSDEV = arm-eabi-
   WINTOOL = y
 endif
-ifeq ($(CONFIG_LPC31XX_BUILDROOT),y)
+ifeq ($(CONFIG_LPC31_BUILDROOT),y)
   # NuttX buildroot under Linux or Cygwin
   CROSSDEV = arm-elf-
   MAXOPTIMIZATION = -Os
@@ -67,13 +67,13 @@ ifeq ($(WINTOOL),y)
   MKDEP = $(TOPDIR)/tools/mknulldeps.sh
   ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
   ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
-  ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/nsh/ld.script}"
+  ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/ld.script}"
 else
   # Linux/Cygwin-native toolchain 
   MKDEP = $(TOPDIR)/tools/mkdeps.sh
   ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
   ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
-  ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/nsh/ld.script
+  ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/ld.script
 endif
 
 CC = $(CROSSDEV)gcc
@@ -122,7 +122,7 @@ OBJEXT = .o
 LIBEXT = .a
 EXEEXT =
 
-ifneq ($(CONFIG_LPC31XX_BUILDROOT),y)
+ifneq ($(CONFIG_LPC31_BUILDROOT),y)
   LDFLAGS += -nostartfiles -nodefaultlibs
 endif
 ifeq ($(CONFIG_DEBUG_SYMBOLS),y)

configs/ea3131/nsh/ld.script

@@ -1,107 +0,0 @@
-/****************************************************************************
- * configs/ea3131/nsh/ld.script
- *
- *   Copyright (C) 2010 Gregory Nutt. All rights reserved.
- *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name NuttX nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-/* The LPC3131 has 192Kb of ISRAM beginning at virtual address 0x1102:8000.
- * LPC31xx boot ROM expects the boot image be compiled with entry point at
- * 0x1102:9000.  A 128b header will appear at this address (applied by
- * lpc313xImgCreator) and the executable code must begin at 0x1102:9080.
- */
-
-MEMORY
-{
-    isram (rwx) : ORIGIN = 0x11029080, LENGTH = 192K - 4224
-}
-
-OUTPUT_ARCH(arm)
-ENTRY(_stext)
-SECTIONS
-{
-	.text : {
-		_stext = ABSOLUTE(.);
-		*(.vectors)
-		*(.text .text.*)        
-		*(.fixup)
-		*(.gnu.warning)
-		*(.rodata .rodata.*)        
-		*(.gnu.linkonce.t.*)
-		*(.glue_7)
-		*(.glue_7t)
-		*(.got)
-		*(.gcc_except_table)
-		*(.gnu.linkonce.r.*)
-		_etext = ABSOLUTE(.);
-	} > isram
-
-	_eronly = ABSOLUTE(.);
-
-	.data : {
-		_sdata = ABSOLUTE(.);
-		*(.data .data.*)
-		*(.gnu.linkonce.d.*)
-		CONSTRUCTORS
-		_edata = ABSOLUTE(.);
-	} > isram
-
-	.ARM.extab : {
-		*(.ARM.extab*)
-	} >isram
-
-	.ARM.exidx : {
-		__exidx_start = ABSOLUTE(.);
-		*(.ARM.exidx*)
-		__exidx_end = ABSOLUTE(.);
-	} > isram
-
-	.bss : {
-		_sbss = ABSOLUTE(.);
-		*(.bss .bss.*)
-		*(.gnu.linkonce.b.*)
-		*(COMMON)
-		_ebss = ABSOLUTE(.);
-	} > isram
-					/* Stabs debugging sections.	*/
-	.stab 0 : { *(.stab) }
-	.stabstr 0 : { *(.stabstr) }
-	.stab.excl 0 : { *(.stab.excl) }
-	.stab.exclstr 0 : { *(.stab.exclstr) }
-	.stab.index 0 : { *(.stab.index) }
-	.stab.indexstr 0 : { *(.stab.indexstr) }
-	.comment 0 : { *(.comment) }
-	.debug_abbrev 0 : { *(.debug_abbrev) }
-	.debug_info 0 : { *(.debug_info) }
-	.debug_line 0 : { *(.debug_line) }
-	.debug_pubnames 0 : { *(.debug_pubnames) }
-	.debug_aranges 0 : { *(.debug_aranges) }
-}

configs/ea3131/nsh/setenv.sh

@@ -32,16 +32,35 @@
 # POSSIBILITY OF SUCH DAMAGE.
 #
 
-if [ "$(basename $0)" = "setenv.sh" ] ; then
+if [ "$_" = "$0" ] ; then
   echo "You must source this script, not run it!" 1>&2
   exit 1
 fi
 
-if [ -z "${PATH_ORIG}" ]; then export PATH_ORIG=${PATH}; fi
-
 WD=`pwd`
-export BUILDROOT_BIN="${WD}/../buildroot/build_arm_nofpu/staging_dir/bin"
+if [ ! -x "setenv.sh" ]; then
-export LPCTOOL_DIR="${WD}/configs/ea3131/tools"
+  echo "This script must be executed from the top-level NuttX build directory"
-export PATH="${BUILDROOT_BIN}:${LPCTOOL_DIR}:/sbin:/usr/sbin:${PATH_ORIG}"
+  exit 1
+fi
 
+if [ -z "${PATH_ORIG}" ]; then
+  export PATH_ORIG="${PATH}"
+fi
+
+# This the Cygwin path to the location where I installed the CodeSourcery
+# toolchain under windows.  You will also have to edit this if you install
+# the CodeSourcery toolchain in any other location
+export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin"
+
+# This the Cygwin path to the location where I build the buildroot
+# toolchain.
+#export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin"
+
+# This is the path to the tools subdirectory
+
+export LPCTOOL_DIR="${WD}/configs/ea3152/tools"
+
+# Add the path to the toolchain to the PATH varialble
+
+export PATH="${TOOLCHAIN_BIN}:${LPCTOOL_DIR}:/sbin:/usr/sbin:${PATH_ORIG}"
 echo "PATH : ${PATH}"

configs/ea3131/ostest/Make.defs

@@ -1,8 +1,8 @@
 ############################################################################
 # configs/ea3131/ostest/Make.defs
 #
-#   Copyright (C) 2009 Gregory Nutt. All rights reserved.
+#   Copyright (C) 2009,2012 Gregory Nutt. All rights reserved.
-#   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+#   Author: Gregory Nutt <gnutt@nuttx.org>
 #
 # Redistribution and use in source and binary forms, with or without
 # modification, are permitted provided that the following conditions
@@ -38,23 +38,23 @@ include ${TOPDIR}/tools/Config.mk
 
 # Setup for the selected toolchain
 
-ifeq ($(CONFIG_LPC31XX_CODESOURCERYW),y)
+ifeq ($(CONFIG_LPC31_CODESOURCERYW),y)
   # CodeSourcery under Windows
   CROSSDEV = arm-none-eabi-
   WINTOOL = y
   MAXOPTIMIZATION = -O2
 endif
-ifeq ($(CONFIG_LPC31XX_CODESOURCERYL),y)
+ifeq ($(CONFIG_LPC31_CODESOURCERYL),y)
   # CodeSourcery under Linux
   CROSSDEV = arm-none-eabi-
   MAXOPTIMIZATION = -O2
 endif
-ifeq ($(CONFIG_LPC31XX_DEVKITARM),y)
+ifeq ($(CONFIG_LPC31_DEVKITARM),y)
   # devkitARM under Windows
   CROSSDEV = arm-eabi-
   WINTOOL = y
 endif
-ifeq ($(CONFIG_LPC31XX_BUILDROOT),y)
+ifeq ($(CONFIG_LPC31_BUILDROOT),y)
   # NuttX buildroot under Linux or Cygwin
   CROSSDEV = arm-elf-
   MAXOPTIMIZATION = -Os
@@ -67,13 +67,13 @@ ifeq ($(WINTOOL),y)
   MKDEP = $(TOPDIR)/tools/mknulldeps.sh
   ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
   ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
-  ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/ostest/ld.script}"
+  ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/ld.script}"
 else
   # Linux/Cygwin-native toolchain 
   MKDEP = $(TOPDIR)/tools/mkdeps.sh
   ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
   ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
-  ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/ostest/ld.script
+  ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/ld.script
 endif
 
 CC = $(CROSSDEV)gcc
@@ -122,7 +122,7 @@ OBJEXT = .o
 LIBEXT = .a
 EXEEXT =
 
-ifneq ($(CONFIG_LPC31XX_BUILDROOT),y)
+ifneq ($(CONFIG_LPC31_BUILDROOT),y)
   LDFLAGS += -nostartfiles -nodefaultlibs
 endif
 ifeq ($(CONFIG_DEBUG_SYMBOLS),y)

configs/ea3131/ostest/ld.script

@@ -1,107 +0,0 @@
-/****************************************************************************
- * configs/ea3131/ostest/ld.script
- *
- *   Copyright (C) 2009 Gregory Nutt. All rights reserved.
- *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name NuttX nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-/* The LPC3131 has 192Kb of ISRAM beginning at virtual address 0x1102:8000.
- * LPC31xx boot ROM expects the boot image be compiled with entry point at
- * 0x1102:9000.  A 128b header will appear at this address (applied by
- * lpc313xImgCreator) and the executable code must begin at 0x1102:9080.
- */
-
-MEMORY
-{
-    isram (rwx) : ORIGIN = 0x11029080, LENGTH = 192K - 4224
-}
-
-OUTPUT_ARCH(arm)
-ENTRY(_stext)
-SECTIONS
-{
-	.text : {
-		_stext = ABSOLUTE(.);
-		*(.vectors)
-		*(.text .text.*)        
-		*(.fixup)
-		*(.gnu.warning)
-		*(.rodata .rodata.*)        
-		*(.gnu.linkonce.t.*)
-		*(.glue_7)
-		*(.glue_7t)
-		*(.got)
-		*(.gcc_except_table)
-		*(.gnu.linkonce.r.*)
-		_etext = ABSOLUTE(.);
-	} > isram
-
-	_eronly = ABSOLUTE(.);
-
-	.data : {
-		_sdata = ABSOLUTE(.);
-		*(.data .data.*)
-		*(.gnu.linkonce.d.*)
-		CONSTRUCTORS
-		_edata = ABSOLUTE(.);
-	} > isram
-
-	.ARM.extab : {
-		*(.ARM.extab*)
-	} >isram
-
-	.ARM.exidx : {
-		__exidx_start = ABSOLUTE(.);
-		*(.ARM.exidx*)
-		__exidx_end = ABSOLUTE(.);
-	} > isram
-
-	.bss : {
-		_sbss = ABSOLUTE(.);
-		*(.bss .bss.*)
-		*(.gnu.linkonce.b.*)
-		*(COMMON)
-		_ebss = ABSOLUTE(.);
-	} > isram
-					/* Stabs debugging sections.	*/
-	.stab 0 : { *(.stab) }
-	.stabstr 0 : { *(.stabstr) }
-	.stab.excl 0 : { *(.stab.excl) }
-	.stab.exclstr 0 : { *(.stab.exclstr) }
-	.stab.index 0 : { *(.stab.index) }
-	.stab.indexstr 0 : { *(.stab.indexstr) }
-	.comment 0 : { *(.comment) }
-	.debug_abbrev 0 : { *(.debug_abbrev) }
-	.debug_info 0 : { *(.debug_info) }
-	.debug_line 0 : { *(.debug_line) }
-	.debug_pubnames 0 : { *(.debug_pubnames) }
-	.debug_aranges 0 : { *(.debug_aranges) }
-}

configs/ea3131/ostest/setenv.sh

@@ -32,16 +32,35 @@
 # POSSIBILITY OF SUCH DAMAGE.
 #
 
-if [ "$(basename $0)" = "setenv.sh" ] ; then
+if [ "$_" = "$0" ] ; then
   echo "You must source this script, not run it!" 1>&2
   exit 1
 fi
 
-if [ -z "${PATH_ORIG}" ]; then export PATH_ORIG=${PATH}; fi
-
 WD=`pwd`
-export BUILDROOT_BIN="${WD}/../buildroot/build_arm_nofpu/staging_dir/bin"
+if [ ! -x "setenv.sh" ]; then
-export LPCTOOL_DIR="${WD}/configs/ea3131/tools"
+  echo "This script must be executed from the top-level NuttX build directory"
-export PATH="${BUILDROOT_BIN}:${LPCTOOL_DIR}:/sbin:/usr/sbin:${PATH_ORIG}"
+  exit 1
+fi
 
+if [ -z "${PATH_ORIG}" ]; then
+  export PATH_ORIG="${PATH}"
+fi
+
+# This the Cygwin path to the location where I installed the CodeSourcery
+# toolchain under windows.  You will also have to edit this if you install
+# the CodeSourcery toolchain in any other location
+export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin"
+
+# This the Cygwin path to the location where I build the buildroot
+# toolchain.
+#export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin"
+
+# This is the path to the tools subdirectory
+
+export LPCTOOL_DIR="${WD}/configs/ea3152/tools"
+
+# Add the path to the toolchain to the PATH varialble
+
+export PATH="${TOOLCHAIN_BIN}:${LPCTOOL_DIR}:/sbin:/usr/sbin:${PATH_ORIG}"
 echo "PATH : ${PATH}"

configs/ea3131/pgnsh/Make.defs

@@ -1,8 +1,8 @@
 ############################################################################
 # configs/ea3131/pgnsh/Make.defs
 #
-#   Copyright (C) 2010 Gregory Nutt. All rights reserved.
+#   Copyright (C) 2010,2012 Gregory Nutt. All rights reserved.
-#   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+#   Author: Gregory Nutt <gnutt@nuttx.org>
 #
 # Redistribution and use in source and binary forms, with or without
 # modification, are permitted provided that the following conditions
@@ -38,23 +38,23 @@ include ${TOPDIR}/tools/Config.mk
 
 # Setup for the selected toolchain
 
-ifeq ($(CONFIG_LPC31XX_CODESOURCERYW),y)
+ifeq ($(CONFIG_LPC31_CODESOURCERYW),y)
   # CodeSourcery under Windows
   CROSSDEV = arm-none-eabi-
   WINTOOL = y
   MAXOPTIMIZATION = -O2
 endif
-ifeq ($(CONFIG_LPC31XX_CODESOURCERYL),y)
+ifeq ($(CONFIG_LPC31_CODESOURCERYL),y)
   # CodeSourcery under Linux
   CROSSDEV = arm-none-eabi-
   MAXOPTIMIZATION = -O2
 endif
-ifeq ($(CONFIG_LPC31XX_DEVKITARM),y)
+ifeq ($(CONFIG_LPC31_DEVKITARM),y)
   # devkitARM under Windows
   CROSSDEV = arm-eabi-
   WINTOOL = y
 endif
-ifeq ($(CONFIG_LPC31XX_BUILDROOT),y)
+ifeq ($(CONFIG_LPC31_BUILDROOT),y)
   # NuttX buildroot under Linux or Cygwin
   CROSSDEV = arm-elf-
   MAXOPTIMIZATION = -Os
@@ -67,13 +67,13 @@ ifeq ($(WINTOOL),y)
   MKDEP = $(TOPDIR)/tools/mknulldeps.sh
   ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
   ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
-  ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/pgnsh/ld.script}"
+  ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/pg-ld.script}"
 else
   # Linux/Cygwin-native toolchain 
   MKDEP = $(TOPDIR)/tools/mkdeps.sh
   ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
   ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
-  ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/pgnsh/ld.script
+  ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/pg-ld.script
 endif
 
 CC = $(CROSSDEV)gcc
@@ -122,7 +122,7 @@ OBJEXT = .o
 LIBEXT = .a
 EXEEXT =
 
-ifneq ($(CONFIG_LPC31XX_BUILDROOT),y)
+ifneq ($(CONFIG_LPC31_BUILDROOT),y)
   LDFLAGS += -nostartfiles -nodefaultlibs
 endif
 ifeq ($(CONFIG_DEBUG_SYMBOLS),y)

configs/ea3131/pgnsh/setenv.sh

@@ -32,16 +32,35 @@
 # POSSIBILITY OF SUCH DAMAGE.
 #
 
-if [ "$(basename $0)" = "setenv.sh" ] ; then
+if [ "$_" = "$0" ] ; then
   echo "You must source this script, not run it!" 1>&2
   exit 1
 fi
 
-if [ -z "${PATH_ORIG}" ]; then export PATH_ORIG=${PATH}; fi
-
 WD=`pwd`
-export BUILDROOT_BIN="${WD}/../buildroot/build_arm_nofpu/staging_dir/bin"
+if [ ! -x "setenv.sh" ]; then
-export LPCTOOL_DIR="${WD}/configs/ea3131/tools"
+  echo "This script must be executed from the top-level NuttX build directory"
-export PATH="${BUILDROOT_BIN}:${LPCTOOL_DIR}:/sbin:/usr/sbin:${PATH_ORIG}"
+  exit 1
+fi
 
+if [ -z "${PATH_ORIG}" ]; then
+  export PATH_ORIG="${PATH}"
+fi
+
+# This the Cygwin path to the location where I installed the CodeSourcery
+# toolchain under windows.  You will also have to edit this if you install
+# the CodeSourcery toolchain in any other location
+export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin"
+
+# This the Cygwin path to the location where I build the buildroot
+# toolchain.
+#export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin"
+
+# This is the path to the tools subdirectory
+
+export LPCTOOL_DIR="${WD}/configs/ea3152/tools"
+
+# Add the path to the toolchain to the PATH varialble
+
+export PATH="${TOOLCHAIN_BIN}:${LPCTOOL_DIR}:/sbin:/usr/sbin:${PATH_ORIG}"
 echo "PATH : ${PATH}"

configs/ea3131/scripts/ld.script

@@ -1,8 +1,8 @@
 /****************************************************************************
- * configs/ea3131/usbserial/ld.script
+ * configs/ea3131/scripts/ld.script
  *
- *   Copyright (C) 2010-2011 Gregory Nutt. All rights reserved.
+ *   Copyright (C) 2010-2012 Gregory Nutt. All rights reserved.
- *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions

configs/ea3131/scripts/pg-ld.script

@@ -1,8 +1,8 @@
 /****************************************************************************
- * configs/ea3131/pgnsh/ld.script
+ * configs/ea3131/scripts/pg-ld.script
  *
- *   Copyright (C) 2010 Gregory Nutt. All rights reserved.
+ *   Copyright (C) 2010, 2012 Gregory Nutt. All rights reserved.
- *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions

configs/ea3131/src/Makefile

@@ -2,7 +2,7 @@
 # configs/ea3131/src/Makefile
 #
 #   Copyright (C) 2009-2010 Gregory Nutt. All rights reserved.
-#   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+#   Author: Gregory Nutt <gnutt@nuttx.org>
 #
 # Redistribution and use in source and binary forms, with or without
 # modification, are permitted provided that the following conditions
@@ -44,13 +44,13 @@ CSRCS		= up_boot.c up_clkinit.c
 ifeq ($(CONFIG_ARCH_BUTTONS),y)
 CSRCS		+= up_buttons.c
 endif
-ifeq ($(CONFIG_LPC31XX_EXTSDRAM),y)
+ifeq ($(CONFIG_LPC31_EXTSDRAM),y)
 CSRCS		+= up_mem.c
 endif
 ifeq ($(CONFIG_ARCH_LEDS),y)
 CSRCS		+= up_leds.c
 endif
-ifeq ($(CONFIG_LPC31XX_SPI),y)
+ifeq ($(CONFIG_LPC31_SPI),y)
 CSRCS		+= up_spi.c
 endif
 ifeq ($(CONFIG_NSH_ARCHINIT),y)

configs/ea3131/src/ea3131_internal.h

@@ -2,8 +2,8 @@
  * configs/ea3131/src/ea3131_internal.h
  * arch/arm/src/board/ea3131_internal.n
  *
- *   Copyright (C) 2009-2010 Gregory Nutt. All rights reserved.
+ *   Copyright (C) 2009-2010,2012 Gregory Nutt. All rights reserved.
- *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions
@@ -86,7 +86,7 @@
  *
  ************************************************************************************/
 
-#ifdef CONFIG_LPC31XX_EXTSDRAM
+#ifdef CONFIG_LPC31_EXTSDRAM
 extern void lpc31_meminitialize(void);
 #endif
 

configs/ea3131/src/up_boot.c

@@ -2,8 +2,8 @@
  * configs/ea3131/src/up_boot.c
  * arch/arm/src/board/up_boot.c
  *
- *   Copyright (C) 2009 Gregory Nutt. All rights reserved.
+ *   Copyright (C) 2009,2012 Gregory Nutt. All rights reserved.
- *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions
@@ -75,7 +75,7 @@ void lpc31_boardinitialize(void)
 {
   /* Initialize configured, external memory resources */
 
-#ifdef CONFIG_LPC31XX_EXTSDRAM
+#ifdef CONFIG_LPC31_EXTSDRAM
   lpc31_meminitialize();
 #endif
 
@@ -83,7 +83,7 @@ void lpc31_boardinitialize(void)
    * lpc31_spiinitialize() has been brought into the link.
    */
 
-#if defined(CONFIG_LPC31XX_SPI)
+#if defined(CONFIG_LPC31_SPI)
   if (lpc31_spiinitialize)
     {
       lpc31_spiinitialize();
@@ -95,7 +95,7 @@ void lpc31_boardinitialize(void)
     * into the build.
     */
 
-#if defined(CONFIG_USBDEV) && defined(CONFIG_LPC31XX_USB)
+#if defined(CONFIG_USBDEV) && defined(CONFIG_LPC31_USB)
   if (lpc31_usbinitialize)
     {
       lpc31_usbinitialize();

configs/ea3131/src/up_fillpage.c

@@ -2,8 +2,8 @@
  * configs/ea3131/src/up_fillpage.c
  * arch/arm/src/board/up_fillpage.c
  *
- *   Copyright (C) 2010 Gregory Nutt. All rights reserved.
+ *   Copyright (C) 2010,2012 Gregory Nutt. All rights reserved.
- *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions
@@ -122,7 +122,7 @@
     * is not enabled.
     */
 
-#  if defined(CONFIG_DISABLE_MOUNTPOINT) || !defined(CONFIG_LPC31XX_MCI)
+#  if defined(CONFIG_DISABLE_MOUNTPOINT) || !defined(CONFIG_LPC31_MCI)
 #    ifdef CONFIG_PAGING_SDSLOT
 #      error "Mountpoints and/or MCI disabled"
 #    endif
@@ -152,7 +152,7 @@
 
    /* Verify that SPI support is enabld */
 
-#ifndef CONFIG_LPC31XX_SPI
+#ifndef CONFIG_LPC31_SPI
 #  error "SPI support is not enabled"
 #endif
 

configs/ea3131/src/up_mem.c

@@ -2,8 +2,8 @@
  * configs/ea3131/src/up_mem.c
  * arch/arm/src/board/up_mem.c
  *
- *   Copyright (C) 2009-2010 Gregory Nutt. All rights reserved.
+ *   Copyright (C) 2009-2010,2012 Gregory Nutt. All rights reserved.
- *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
  *
  * References:
  *   - NXP UM10314 LPC3130/31 User manual Rev. 1.01 — 9 September 2009
@@ -59,7 +59,7 @@
 #include "lpc31_mpmc.h"
 #include "ea3131_internal.h"
 
-#ifdef CONFIG_LPC31XX_EXTSDRAM
+#ifdef CONFIG_LPC31_EXTSDRAM
 
 /****************************************************************************
  * Pre-processor Definitions
@@ -164,8 +164,8 @@ static void lpc31_sdraminitialize(void)
    * replaced with an apriori value.
    */
 
-#ifdef CONFIG_LPC31XX_SDRAMHCLK
+#ifdef CONFIG_LPC31_SDRAMHCLK
-# define HCLK CONFIG_LPC31XX_SDRAMHCLK
+# define HCLK CONFIG_LPC31_SDRAMHCLK
 #else
   uint32_t hclk = lpc31_clkfreq(CLKID_MPMCCFGCLK2, DOMAINID_SYS);
 # define HCLK hclk
@@ -356,4 +356,4 @@ void lpc31_meminitialize(void)
 
   lpc31_sdraminitialize();
 }
-#endif /* CONFIG_LPC31XX_EXTSDRAM */
+#endif /* CONFIG_LPC31_EXTSDRAM */

configs/ea3131/src/up_nsh.c

@@ -2,8 +2,8 @@
  * config/ea3131/src/up_nsh.c
  * arch/arm/src/board/up_nsh.c
  *
- *   Copyright (C) 2009 Gregory Nutt. All rights reserved.
+ *   Copyright (C) 2009, 2012 Gregory Nutt. All rights reserved.
- *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions
@@ -45,7 +45,7 @@
 #include <debug.h>
 #include <errno.h>
 
-#ifdef CONFIG_LPC31XX_MCI
+#ifdef CONFIG_LPC31_MCI
 #  include <nuttx/sdio.h>
 #  include <nuttx/mmcsd.h>
 #endif
@@ -88,7 +88,7 @@
  * is not enabled.
  */
 
-#if defined(CONFIG_DISABLE_MOUNTPOINT) || !defined(CONFIG_LPC31XX_MCI)
+#if defined(CONFIG_DISABLE_MOUNTPOINT) || !defined(CONFIG_LPC31_MCI)
 #  undef CONFIG_NSH_HAVEMMCSD
 #endif
 

configs/ea3131/src/up_spi.c

@@ -2,8 +2,8 @@
  * configs/ea3131/src/up_spi.c
  * arch/arm/src/board/up_spi.c
  *
- *   Copyright (C) 2009-2011 Gregory Nutt. All rights reserved.
+ *   Copyright (C) 2009-2012 Gregory Nutt. All rights reserved.
- *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions
@@ -52,7 +52,7 @@
 #include "lpc31_internal.h"
 #include "ea3131_internal.h"
 
-#ifdef CONFIG_LPC31XX_SPI
+#ifdef CONFIG_LPC31_SPI
 #if 0 /* At present, EA3131 specific logic is hard-coded in the file lpc31_spi.c
        * in arch/arm/src/lpc31xx */
 
@@ -138,5 +138,5 @@ uint8_t lpc31_spistatus(FAR struct spi_dev_s *dev, enum spi_dev_e devid)
 }
 
 #endif /* 0 */
-#endif /* CONFIG_LPC31XX_SPI  */
+#endif /* CONFIG_LPC31_SPI  */
 

configs/ea3131/usbserial/Make.defs

@@ -1,8 +1,8 @@
 ############################################################################
 # configs/ea3131/usbserial/Make.defs
 #
-#   Copyright (C) 2010 Gregory Nutt. All rights reserved.
+#   Copyright (C) 2010,2012 Gregory Nutt. All rights reserved.
-#   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+#   Author: Gregory Nutt <gnutt@nuttx.org>
 #
 # Redistribution and use in source and binary forms, with or without
 # modification, are permitted provided that the following conditions
@@ -38,23 +38,23 @@ include ${TOPDIR}/tools/Config.mk
 
 # Setup for the selected toolchain
 
-ifeq ($(CONFIG_LPC31XX_CODESOURCERYW),y)
+ifeq ($(CONFIG_LPC31_CODESOURCERYW),y)
   # CodeSourcery under Windows
   CROSSDEV = arm-none-eabi-
   WINTOOL = y
   MAXOPTIMIZATION = -O2
 endif
-ifeq ($(CONFIG_LPC31XX_CODESOURCERYL),y)
+ifeq ($(CONFIG_LPC31_CODESOURCERYL),y)
   # CodeSourcery under Linux
   CROSSDEV = arm-none-eabi-
   MAXOPTIMIZATION = -O2
 endif
-ifeq ($(CONFIG_LPC31XX_DEVKITARM),y)
+ifeq ($(CONFIG_LPC31_DEVKITARM),y)
   # devkitARM under Windows
   CROSSDEV = arm-eabi-
   WINTOOL = y
 endif
-ifeq ($(CONFIG_LPC31XX_BUILDROOT),y)
+ifeq ($(CONFIG_LPC31_BUILDROOT),y)
   # NuttX buildroot under Linux or Cygwin
   CROSSDEV = arm-elf-
   MAXOPTIMIZATION = -Os
@@ -67,13 +67,13 @@ ifeq ($(WINTOOL),y)
   MKDEP = $(TOPDIR)/tools/mknulldeps.sh
   ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
   ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
-  ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/usbserial/ld.script}"
+  ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/ld.script}"
 else
   # Linux/Cygwin-native toolchain 
   MKDEP = $(TOPDIR)/tools/mkdeps.sh
   ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
   ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
-  ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/usbserial/ld.script
+  ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/ld.script
 endif
 
 CC = $(CROSSDEV)gcc
@@ -122,7 +122,7 @@ OBJEXT = .o
 LIBEXT = .a
 EXEEXT =
 
-ifneq ($(CONFIG_LPC31XX_BUILDROOT),y)
+ifneq ($(CONFIG_LPC31_BUILDROOT),y)
   LDFLAGS += -nostartfiles -nodefaultlibs
 endif
 ifeq ($(CONFIG_DEBUG_SYMBOLS),y)

configs/ea3131/usbserial/setenv.sh

@@ -32,16 +32,35 @@
 # POSSIBILITY OF SUCH DAMAGE.
 #
 
-if [ "$(basename $0)" = "setenv.sh" ] ; then
+if [ "$_" = "$0" ] ; then
   echo "You must source this script, not run it!" 1>&2
   exit 1
 fi
 
-if [ -z "${PATH_ORIG}" ]; then export PATH_ORIG=${PATH}; fi
-
 WD=`pwd`
-export BUILDROOT_BIN="${WD}/../buildroot/build_arm_nofpu/staging_dir/bin"
+if [ ! -x "setenv.sh" ]; then
-export LPCTOOL_DIR="${WD}/configs/ea3131/tools"
+  echo "This script must be executed from the top-level NuttX build directory"
-export PATH="${BUILDROOT_BIN}:${LPCTOOL_DIR}:/sbin:/usr/sbin:${PATH_ORIG}"
+  exit 1
+fi
 
+if [ -z "${PATH_ORIG}" ]; then
+  export PATH_ORIG="${PATH}"
+fi
+
+# This the Cygwin path to the location where I installed the CodeSourcery
+# toolchain under windows.  You will also have to edit this if you install
+# the CodeSourcery toolchain in any other location
+export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin"
+
+# This the Cygwin path to the location where I build the buildroot
+# toolchain.
+#export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin"
+
+# This is the path to the tools subdirectory
+
+export LPCTOOL_DIR="${WD}/configs/ea3152/tools"
+
+# Add the path to the toolchain to the PATH varialble
+
+export PATH="${TOOLCHAIN_BIN}:${LPCTOOL_DIR}:/sbin:/usr/sbin:${PATH_ORIG}"
 echo "PATH : ${PATH}"

configs/ea3131/usbstorage/Make.defs

@@ -1,8 +1,8 @@
 ############################################################################
 # configs/ea3131/usbstorage/Make.defs
 #
-#   Copyright (C) 2010 Gregory Nutt. All rights reserved.
+#   Copyright (C) 2010,2012 Gregory Nutt. All rights reserved.
-#   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+#   Author: Gregory Nutt <gnutt@nuttx.org>
 #
 # Redistribution and use in source and binary forms, with or without
 # modification, are permitted provided that the following conditions
@@ -38,23 +38,23 @@ include ${TOPDIR}/tools/Config.mk
 
 # Setup for the selected toolchain
 
-ifeq ($(CONFIG_LPC31XX_CODESOURCERYW),y)
+ifeq ($(CONFIG_LPC31_CODESOURCERYW),y)
   # CodeSourcery under Windows
   CROSSDEV = arm-none-eabi-
   WINTOOL = y
   MAXOPTIMIZATION = -O2
 endif
-ifeq ($(CONFIG_LPC31XX_CODESOURCERYL),y)
+ifeq ($(CONFIG_LPC31_CODESOURCERYL),y)
   # CodeSourcery under Linux
   CROSSDEV = arm-none-eabi-
   MAXOPTIMIZATION = -O2
 endif
-ifeq ($(CONFIG_LPC31XX_DEVKITARM),y)
+ifeq ($(CONFIG_LPC31_DEVKITARM),y)
   # devkitARM under Windows
   CROSSDEV = arm-eabi-
   WINTOOL = y
 endif
-ifeq ($(CONFIG_LPC31XX_BUILDROOT),y)
+ifeq ($(CONFIG_LPC31_BUILDROOT),y)
   # NuttX buildroot under Linux or Cygwin
   CROSSDEV = arm-elf-
   MAXOPTIMIZATION = -Os
@@ -67,13 +67,13 @@ ifeq ($(WINTOOL),y)
   MKDEP = $(TOPDIR)/tools/mknulldeps.sh
   ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
   ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
-  ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/usbstorage/ld.script}"
+  ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/ld.script}"
 else
   # Linux/Cygwin-native toolchain 
   MKDEP = $(TOPDIR)/tools/mkdeps.sh
   ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
   ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
-  ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/usbstorage/ld.script
+  ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/ld.script
 endif
 
 CC = $(CROSSDEV)gcc
@@ -122,7 +122,7 @@ OBJEXT = .o
 LIBEXT = .a
 EXEEXT =
 
-ifneq ($(CONFIG_LPC31XX_BUILDROOT),y)
+ifneq ($(CONFIG_LPC31_BUILDROOT),y)
   LDFLAGS += -nostartfiles -nodefaultlibs
 endif
 ifeq ($(CONFIG_DEBUG_SYMBOLS),y)

configs/ea3131/usbstorage/ld.script

@@ -1,107 +0,0 @@
-/****************************************************************************
- * configs/ea3131/usbstorage/ld.script
- *
- *   Copyright (C) 2010-2011 Gregory Nutt. All rights reserved.
- *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name NuttX nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-/* The LPC3131 has 192Kb of ISRAM beginning at virtual address 0x1102:8000.
- * LPC31xx boot ROM expects the boot image be compiled with entry point at
- * 0x1102:9000.  A 128b header will appear at this address (applied by
- * lpc313xImgCreator) and the executable code must begin at 0x1102:9080.
- */
-
-MEMORY
-{
-    isram (rwx) : ORIGIN = 0x11029080, LENGTH = 192K - 4224
-}
-
-OUTPUT_ARCH(arm)
-ENTRY(_stext)
-SECTIONS
-{
-	.text : {
-		_stext = ABSOLUTE(.);
-		*(.vectors)
-		*(.text .text.*)        
-		*(.fixup)
-		*(.gnu.warning)
-		*(.rodata .rodata.*)        
-		*(.gnu.linkonce.t.*)
-		*(.glue_7)
-		*(.glue_7t)
-		*(.got)
-		*(.gcc_except_table)
-		*(.gnu.linkonce.r.*)
-		_etext = ABSOLUTE(.);
-	} > isram
-
-	_eronly = ABSOLUTE(.);
-
-	.data : {
-		_sdata = ABSOLUTE(.);
-		*(.data .data.*)
-		*(.gnu.linkonce.d.*)
-		CONSTRUCTORS
-		_edata = ABSOLUTE(.);
-	} > isram
-
-	.ARM.extab : {
-		*(.ARM.extab*)
-	} >isram
-
-	__exidx_start = ABSOLUTE(.);
-	.ARM.exidx : {
-		*(.ARM.exidx*)
-	} > isram
-	__exidx_end = ABSOLUTE(.);
-
-	.bss : {
-		_sbss = ABSOLUTE(.);
-		*(.bss .bss.*)
-		*(.gnu.linkonce.b.*)
-		*(COMMON)
-		_ebss = ABSOLUTE(.);
-	} > isram
-					/* Stabs debugging sections.	*/
-	.stab 0 : { *(.stab) }
-	.stabstr 0 : { *(.stabstr) }
-	.stab.excl 0 : { *(.stab.excl) }
-	.stab.exclstr 0 : { *(.stab.exclstr) }
-	.stab.index 0 : { *(.stab.index) }
-	.stab.indexstr 0 : { *(.stab.indexstr) }
-	.comment 0 : { *(.comment) }
-	.debug_abbrev 0 : { *(.debug_abbrev) }
-	.debug_info 0 : { *(.debug_info) }
-	.debug_line 0 : { *(.debug_line) }
-	.debug_pubnames 0 : { *(.debug_pubnames) }
-	.debug_aranges 0 : { *(.debug_aranges) }
-}

configs/ea3131/usbstorage/setenv.sh

@@ -32,16 +32,35 @@
 # POSSIBILITY OF SUCH DAMAGE.
 #
 
-if [ "$(basename $0)" = "setenv.sh" ] ; then
+if [ "$_" = "$0" ] ; then
   echo "You must source this script, not run it!" 1>&2
   exit 1
 fi
 
-if [ -z "${PATH_ORIG}" ]; then export PATH_ORIG=${PATH}; fi
-
 WD=`pwd`
-export BUILDROOT_BIN="${WD}/../buildroot/build_arm_nofpu/staging_dir/bin"
+if [ ! -x "setenv.sh" ]; then
-export LPCTOOL_DIR="${WD}/configs/ea3131/tools"
+  echo "This script must be executed from the top-level NuttX build directory"
-export PATH="${BUILDROOT_BIN}:${LPCTOOL_DIR}:/sbin:/usr/sbin:${PATH_ORIG}"
+  exit 1
+fi
 
+if [ -z "${PATH_ORIG}" ]; then
+  export PATH_ORIG="${PATH}"
+fi
+
+# This the Cygwin path to the location where I installed the CodeSourcery
+# toolchain under windows.  You will also have to edit this if you install
+# the CodeSourcery toolchain in any other location
+export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin"
+
+# This the Cygwin path to the location where I build the buildroot
+# toolchain.
+#export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin"
+
+# This is the path to the tools subdirectory
+
+export LPCTOOL_DIR="${WD}/configs/ea3152/tools"
+
+# Add the path to the toolchain to the PATH varialble
+
+export PATH="${TOOLCHAIN_BIN}:${LPCTOOL_DIR}:/sbin:/usr/sbin:${PATH_ORIG}"
 echo "PATH : ${PATH}"

configs/ea3152/README.txt

@@ -42,12 +42,12 @@ GNU Toolchain Options
   add one of the following configuration options to your .config (or defconfig)
   file:
 
-    CONFIG_LPC31XX_CODESOURCERYW=y  : CodeSourcery under Windows
+    CONFIG_LPC31_CODESOURCERYW=y  : CodeSourcery under Windows
-    CONFIG_LPC31XX_CODESOURCERYL=y  : CodeSourcery under Linux
+    CONFIG_LPC31_CODESOURCERYL=y  : CodeSourcery under Linux
-    CONFIG_LPC31XX_DEVKITARM=y      : devkitARM under Windows
+    CONFIG_LPC31_DEVKITARM=y      : devkitARM under Windows
-    CONFIG_LPC31XX_BUILDROOT=y	    : NuttX buildroot under Linux or Cygwin (default)
+    CONFIG_LPC31_BUILDROOT=y	    : NuttX buildroot under Linux or Cygwin (default)
 
-  If you are not using CONFIG_LPC31XX_BUILDROOT, then you may also have to modify
+  If you are not using CONFIG_LPC31_BUILDROOT, then you may also have to modify
   the PATH in the setenv.h file if your make cannot find the tools.
 
   NOTE: the CodeSourcery (for Windows), devkitARM, and Raisonance toolchains are
@@ -355,27 +355,27 @@ ARM/EA3152-specific Configuration Options
 
   Individual subsystems can be enabled:
 
-	CONFIG_LPC31XX_MCI, CONFIG_LPC31XX_SPI, CONFIG_LPC31XX_UART
+	CONFIG_LPC31_MCI, CONFIG_LPC31_SPI, CONFIG_LPC31_UART
 
   External memory available on the board (see also CONFIG_MM_REGIONS)
 
-	CONFIG_LPC31XX_EXTSRAM0 - Select if external SRAM0 is present
+	CONFIG_LPC31_EXTSRAM0 - Select if external SRAM0 is present
-	CONFIG_LPC31XX_EXTSRAM0HEAP - Select if external SRAM0 should be
+	CONFIG_LPC31_EXTSRAM0HEAP - Select if external SRAM0 should be
 	  configured as part of the NuttX heap.
-	CONFIG_LPC31XX_EXTSRAM0SIZE - Size (in bytes) of the installed
+	CONFIG_LPC31_EXTSRAM0SIZE - Size (in bytes) of the installed
 	  external SRAM0 memory
-	CONFIG_LPC31XX_EXTSRAM1 - Select if external SRAM1 is present
+	CONFIG_LPC31_EXTSRAM1 - Select if external SRAM1 is present
-	CONFIG_LPC31XX_EXTSRAM1HEAP - Select if external SRAM1 should be
+	CONFIG_LPC31_EXTSRAM1HEAP - Select if external SRAM1 should be
 	  configured as part of the NuttX heap.
-	CONFIG_LPC31XX_EXTSRAM1SIZE - Size (in bytes) of the installed
+	CONFIG_LPC31_EXTSRAM1SIZE - Size (in bytes) of the installed
 	  external SRAM1 memory
-	CONFIG_LPC31XX_EXTSDRAM - Select if external SDRAM is present
+	CONFIG_LPC31_EXTSDRAM - Select if external SDRAM is present
-	CONFIG_LPC31XX_EXTSDRAMHEAP - Select if external SDRAM should be
+	CONFIG_LPC31_EXTSDRAMHEAP - Select if external SDRAM should be
 	  configured as part of the NuttX heap.
-	CONFIG_LPC31XX_EXTSDRAMSIZE - Size (in bytes) of the installed
+	CONFIG_LPC31_EXTSDRAMSIZE - Size (in bytes) of the installed
 	  external SDRAM memory
-	CONFIG_LPC31XX_EXTNAND - Select if external NAND is present
+	CONFIG_LPC31_EXTNAND - Select if external NAND is present
-	CONFIG_LPC31XX_EXTSDRAMSIZE - Size (in bytes) of the installed
+	CONFIG_LPC31_EXTSDRAMSIZE - Size (in bytes) of the installed
 	  external NAND memory
 
   LPC313X specific device driver settings

configs/ea3152/ostest/Make.defs

@@ -1,7 +1,7 @@
 ############################################################################
 # configs/ea3152/ostest/Make.defs
 #
-#   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+#   Copyright (C) 2011-2012 Gregory Nutt. All rights reserved.
 #   Author: Gregory Nutt <gnutt@nuttx.org>
 #
 # Redistribution and use in source and binary forms, with or without
@@ -38,23 +38,23 @@ include ${TOPDIR}/tools/Config.mk
 
 # Setup for the selected toolchain
 
-ifeq ($(CONFIG_LPC31XX_CODESOURCERYW),y)
+ifeq ($(CONFIG_LPC31_CODESOURCERYW),y)
   # CodeSourcery under Windows
   CROSSDEV = arm-none-eabi-
   WINTOOL = y
   MAXOPTIMIZATION = -O2
 endif
-ifeq ($(CONFIG_LPC31XX_CODESOURCERYL),y)
+ifeq ($(CONFIG_LPC31_CODESOURCERYL),y)
   # CodeSourcery under Linux
   CROSSDEV = arm-none-eabi-
   MAXOPTIMIZATION = -O2
 endif
-ifeq ($(CONFIG_LPC31XX_DEVKITARM),y)
+ifeq ($(CONFIG_LPC31_DEVKITARM),y)
   # devkitARM under Windows
   CROSSDEV = arm-eabi-
   WINTOOL = y
 endif
-ifeq ($(CONFIG_LPC31XX_BUILDROOT),y)
+ifeq ($(CONFIG_LPC31_BUILDROOT),y)
   # NuttX buildroot under Linux or Cygwin
   CROSSDEV = arm-elf-
   MAXOPTIMIZATION = -Os
@@ -67,13 +67,13 @@ ifeq ($(WINTOOL),y)
   MKDEP = $(TOPDIR)/tools/mknulldeps.sh
   ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
   ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
-  ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/ostest/ld.script}"
+  ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/ld.script}"
 else
   # Linux/Cygwin-native toolchain 
   MKDEP = $(TOPDIR)/tools/mkdeps.sh
   ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
   ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
-  ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/ostest/ld.script
+  ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/ld.script
 endif
 
 CC = $(CROSSDEV)gcc
@@ -122,7 +122,7 @@ OBJEXT = .o
 LIBEXT = .a
 EXEEXT =
 
-ifneq ($(CONFIG_LPC31XX_BUILDROOT),y)
+ifneq ($(CONFIG_LPC31_BUILDROOT),y)
   LDFLAGS += -nostartfiles -nodefaultlibs
 endif
 ifeq ($(CONFIG_DEBUG_SYMBOLS),y)

configs/ea3152/ostest/setenv.sh

@@ -32,16 +32,35 @@
 # POSSIBILITY OF SUCH DAMAGE.
 #
 
-if [ "$(basename $0)" = "setenv.sh" ] ; then
+if [ "$_" = "$0" ] ; then
   echo "You must source this script, not run it!" 1>&2
   exit 1
 fi
 
-if [ -z "${PATH_ORIG}" ]; then export PATH_ORIG=${PATH}; fi
-
 WD=`pwd`
-export BUILDROOT_BIN="${WD}/../buildroot/build_arm_nofpu/staging_dir/bin"
+if [ ! -x "setenv.sh" ]; then
-export LPCTOOL_DIR="${WD}/configs/ea3152/tools"
+  echo "This script must be executed from the top-level NuttX build directory"
-export PATH="${BUILDROOT_BIN}:${LPCTOOL_DIR}:/sbin:/usr/sbin:${PATH_ORIG}"
+  exit 1
+fi
 
+if [ -z "${PATH_ORIG}" ]; then
+  export PATH_ORIG="${PATH}"
+fi
+
+# This the Cygwin path to the location where I installed the CodeSourcery
+# toolchain under windows.  You will also have to edit this if you install
+# the CodeSourcery toolchain in any other location
+export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin"
+
+# This the Cygwin path to the location where I build the buildroot
+# toolchain.
+#export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin"
+
+# This is the path to the tools subdirectory
+
+export LPCTOOL_DIR="${WD}/configs/ea3152/tools"
+
+# Add the path to the toolchain to the PATH varialble
+
+export PATH="${TOOLCHAIN_BIN}:${LPCTOOL_DIR}:/sbin:/usr/sbin:${PATH_ORIG}"
 echo "PATH : ${PATH}"

configs/ea3152/scripts/ld.script

@@ -1,7 +1,7 @@
 /****************************************************************************
- * configs/ea3152/ostest/ld.script
+ * configs/ea3152/scripts/ld.script
  *
- *   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+ *   Copyright (C) 2011-2012 Gregory Nutt. All rights reserved.
  *   Author: Gregory Nutt <gnutt@nuttx.org>
  *
  * Redistribution and use in source and binary forms, with or without

configs/ea3152/src/Makefile

@@ -44,13 +44,13 @@ CSRCS		= up_boot.c up_clkinit.c
 ifeq ($(CONFIG_ARCH_BUTTONS),y)
 CSRCS		+= up_buttons.c
 endif
-ifeq ($(CONFIG_LPC31XX_EXTSDRAM),y)
+ifeq ($(CONFIG_LPC31_EXTSDRAM),y)
 CSRCS		+= up_mem.c
 endif
 ifeq ($(CONFIG_ARCH_LEDS),y)
 CSRCS		+= up_leds.c
 endif
-ifeq ($(CONFIG_LPC31XX_SPI),y)
+ifeq ($(CONFIG_LPC31_SPI),y)
 CSRCS		+= up_spi.c
 endif
 ifeq ($(CONFIG_NSH_ARCHINIT),y)

configs/ea3152/src/ea3152_internal.h

@@ -86,7 +86,7 @@
  *
  ************************************************************************************/
 
-#ifdef CONFIG_LPC31XX_EXTSDRAM
+#ifdef CONFIG_LPC31_EXTSDRAM
 extern void lpc31_meminitialize(void);
 #endif
 

configs/ea3152/src/up_boot.c

@@ -75,7 +75,7 @@ void lpc31_boardinitialize(void)
 {
   /* Initialize configured, external memory resources */
 
-#ifdef CONFIG_LPC31XX_EXTSDRAM
+#ifdef CONFIG_LPC31_EXTSDRAM
   lpc31_meminitialize();
 #endif
 
@@ -83,7 +83,7 @@ void lpc31_boardinitialize(void)
    * lpc31_spiinitialize() has been brought into the link.
    */
 
-#if defined(CONFIG_LPC31XX_SPI)
+#if defined(CONFIG_LPC31_SPI)
   if (lpc31_spiinitialize)
     {
       lpc31_spiinitialize();
@@ -95,7 +95,7 @@ void lpc31_boardinitialize(void)
     * into the build.
     */
 
-#if defined(CONFIG_USBDEV) && defined(CONFIG_LPC31XX_USB)
+#if defined(CONFIG_USBDEV) && defined(CONFIG_LPC31_USB)
   if (lpc31_usbinitialize)
     {
       lpc31_usbinitialize();

configs/ea3152/src/up_fillpage.c

@@ -122,7 +122,7 @@
     * is not enabled.
     */
 
-#  if defined(CONFIG_DISABLE_MOUNTPOINT) || !defined(CONFIG_LPC31XX_MCI)
+#  if defined(CONFIG_DISABLE_MOUNTPOINT) || !defined(CONFIG_LPC31_MCI)
 #    ifdef CONFIG_PAGING_SDSLOT
 #      error "Mountpoints and/or MCI disabled"
 #    endif
@@ -152,7 +152,7 @@
 
    /* Verify that SPI support is enabld */
 
-#ifndef CONFIG_LPC31XX_SPI
+#ifndef CONFIG_LPC31_SPI
 #  error "SPI support is not enabled"
 #endif
 

configs/ea3152/src/up_mem.c

@@ -59,7 +59,7 @@
 #include "lpc31_mpmc.h"
 #include "ea3152_internal.h"
 
-#ifdef CONFIG_LPC31XX_EXTSDRAM
+#ifdef CONFIG_LPC31_EXTSDRAM
 
 /****************************************************************************
  * Pre-processor Definitions
@@ -164,8 +164,8 @@ static void lpc31_sdraminitialize(void)
    * replaced with an apriori value.
    */
 
-#ifdef CONFIG_LPC31XX_SDRAMHCLK
+#ifdef CONFIG_LPC31_SDRAMHCLK
-# define HCLK CONFIG_LPC31XX_SDRAMHCLK
+# define HCLK CONFIG_LPC31_SDRAMHCLK
 #else
   uint32_t hclk = lpc31_clkfreq(CLKID_MPMCCFGCLK2, DOMAINID_SYS);
 # define HCLK hclk
@@ -356,4 +356,4 @@ void lpc31_meminitialize(void)
 
   lpc31_sdraminitialize();
 }
-#endif /* CONFIG_LPC31XX_EXTSDRAM */
+#endif /* CONFIG_LPC31_EXTSDRAM */

configs/ea3152/src/up_nsh.c

@@ -45,7 +45,7 @@
 #include <debug.h>
 #include <errno.h>
 
-#ifdef CONFIG_LPC31XX_MCI
+#ifdef CONFIG_LPC31_MCI
 #  include <nuttx/sdio.h>
 #  include <nuttx/mmcsd.h>
 #endif
@@ -88,7 +88,7 @@
  * is not enabled.
  */
 
-#if defined(CONFIG_DISABLE_MOUNTPOINT) || !defined(CONFIG_LPC31XX_MCI)
+#if defined(CONFIG_DISABLE_MOUNTPOINT) || !defined(CONFIG_LPC31_MCI)
 #  undef CONFIG_NSH_HAVEMMCSD
 #endif
 

configs/ea3152/src/up_spi.c

@@ -52,7 +52,7 @@
 #include "lpc31_internal.h"
 #include "ea3152_internal.h"
 
-#ifdef CONFIG_LPC31XX_SPI
+#ifdef CONFIG_LPC31_SPI
 #if 0 /* At present, EA3152 specific logic is hard-coded in the file lpc31_spi.c
        * in arch/arm/src/lpc31xx */
 
@@ -138,5 +138,5 @@ uint8_t lpc31_spistatus(FAR struct spi_dev_s *dev, enum spi_dev_e devid)
 }
 
 #endif /* 0 */
-#endif /* CONFIG_LPC31XX_SPI  */
+#endif /* CONFIG_LPC31_SPI  */
 

configs/stm3240g-eval/nxwm/setenv.sh

@@ -57,14 +57,6 @@ fi
 # the CodeSourcery toolchain in any other location
 export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin"
 
-# These are the Cygwin paths to the locations where I installed the Atollic
-# toolchain under windows.  You will also have to edit this if you install
-# the Atollic toolchain in any other location.  /usr/bin is added before
-# the Atollic bin path because there is are binaries named gcc.exe and g++.exe
-# at those locations as well.
-#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for ARM Pro 2.3.0/ARMTools/bin"
-#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for STMicroelectronics STM32 Lite 2.3.0/ARMTools/bin"
-
 # This the Cygwin path to the location where I build the buildroot
 # toolchain.
 #export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin"