configs/stm3240g-eval/nxconsole: Configuration converted to use the kconfig-frontends tools

2026-06-05 15:22:18 +08:00 · 2014-03-04 10:33:06 -06:00
parent 4f067ce765
commit 433f5f6227
7 changed files with 1143 additions and 875 deletions
@@ -54,13 +54,13 @@ GNU Toolchain Options
  add one of the following configuration options to your .config (or defconfig)
  file:

-    CONFIG_STM32_CODESOURCERYW=y  : CodeSourcery under Windows
-    CONFIG_STM32_CODESOURCERYL=y  : CodeSourcery under Linux
-    CONFIG_STM32_ATOLLIC_LITE=y   : The free, "Lite" version of Atollic toolchain under Windows
-    CONFIG_STM32_ATOLLIC_PRO=y    : The paid, "Pro" version of Atollic toolchain under Windows
-    CONFIG_STM32_DEVKITARM=y      : devkitARM under Windows
-    CONFIG_STM32_RAISONANCE=y     : Raisonance RIDE7 under Windows
-    CONFIG_STM32_BUILDROOT=y      : NuttX buildroot under Linux or Cygwin (default)
+    CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYW=y  : CodeSourcery under Windows
+    CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL=y  : CodeSourcery under Linux
+    CONFIG_ARMV7M_TOOLCHAIN_ATOLLIC_LITE=y   : The free, "Lite" version of Atollic toolchain under Windows
+    CONFIG_ARMV7M_TOOLCHAIN_ATOLLIC_PRO=y    : The paid, "Pro" version of Atollic toolchain under Windows
+    CONFIG_ARMV7M_TOOLCHAIN_DEVKITARM=y      : devkitARM under Windows
+    CONFIG_ARMV7M_TOOLCHAIN_RAISONANCE=y     : Raisonance RIDE7 under Windows
+    CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT=y      : NuttX buildroot under Linux or Cygwin (default)

  If you change the default toolchain, then you may also have to modify the PATH in
  the setenv.h file if your make cannot find the tools.
@@ -466,8 +466,8 @@ in order to successfully build NuttX using the Atollic toolchain WITH FPU suppor
  -CONFIG_ARCH_FPU=n              : Enable FPU support
  +CONFIG_ARCH_FPU=y

-  -CONFIG_STM32_CODESOURCERYW=y   : Disable the CodeSourcery toolchain
-  +CONFIG_STM32_CODESOURCERYW=n
+  -CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYW=y   : Disable the CodeSourcery toolchain
+  +CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYW=n

  -CONFIG_STM32_ATOLLIC_LITE=n   : Enable *one* the Atollic toolchains
   CONFIG_STM32_ATOLLIC_PRO=n
@@ -873,7 +873,7 @@ STM3240G-EVAL-specific Configuration Options
      In this orientation, the top of the display is to the right
      of the buttons (if the board is held so that the buttons are at the
      botton of the board).
-    CONFIG_LCD_RDSHIFT - When reading 16-bit gram data, there appears
+    CONFIG_STM3240G_LCD_RDSHIFT - When reading 16-bit gram data, there appears
      to be a shift in the returned data.  This value fixes the offset.
      Default 5.

@@ -881,8 +881,8 @@ STM3240G-EVAL-specific Configuration Options
    ID value.  However, code size can be reduced by suppressing support for
    individual LCDs using:

-    CONFIG_STM32_ILI9320_DISABLE (includes ILI9321)
-    CONFIG_STM32_ILI9325_DISABLE
+    CONFIG_STM3240G_ILI9320_DISABLE (includes ILI9321)
+    CONFIG_STM3240G_ILI9325_DISABLE

  STM32 USB OTG FS Host Driver Support

@@ -962,10 +962,10 @@ Where <subdir> is one of the following:
    Configuration settings that you may need to change for your
    environment:

-      CONFIG_STM32_CODESOURCERYL=y      - CodeSourcery for Linux
-      CONFIG_EXAMPLES_DISCOVER_DHCPC=y  - DHCP Client
-      CONFIG_EXAMPLES_DISCOVER_IPADDR   - (not defined)
-      CONFIG_EXAMPLES_DISCOVER_DRIPADDR - Router IP address
+      CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL=y - CodeSourcery for Linux
+      CONFIG_EXAMPLES_DISCOVER_DHCPC=y        - DHCP Client
+      CONFIG_EXAMPLES_DISCOVER_IPADDR         - (not defined)
+      CONFIG_EXAMPLES_DISCOVER_DRIPADDR       - Router IP address

    NOTE:  This configuration uses to the kconfig-mconf configuration tool to
    control the configuration.  See the section entitled "NuttX Configuration
@@ -1096,7 +1096,7 @@ Where <subdir> is one of the following:
    using the STM32's Ethernet controller. It uses apps/examples/nettest to exercise the
    TCP/IP network.

-    CONFIG_STM32_CODESOURCERYW=y                           : CodeSourcery under Windows
+    CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYW=y                : CodeSourcery under Windows
    CONFIG_EXAMPLES_NETTEST_SERVER=n                       : Target is configured as the client
    CONFIG_EXAMPLES_NETTEST_PERFORMANCE=y                  : Only network performance is verified.
    CONFIG_EXAMPLES_NETTEST_IPADDR=(10<<24|0<<16|0<<8|2)   : Target side is IP: 10.0.0.2
@@ -1119,7 +1119,7 @@ Where <subdir> is one of the following:
    Configures the NuttShell (nsh) located at apps/examples/nsh.  The
    Configuration enables both the serial and telnet NSH interfaces.

-    CONFIG_STM32_CODESOURCERYW=y              : CodeSourcery under Windows
+    CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYW=y   : CodeSourcery under Windows
    CONFIG_NSH_DHCPC=n                        : DHCP is disabled
    CONFIG_NSH_IPADDR=(10<<24|0<<16|0<<8|2)   : Target IP address 10.0.0.2
    CONFIG_NSH_DRIPADDR=(10<<24|0<<16|0<<8|1) : Host IP address 10.0.0.1
@@ -1424,27 +1424,43 @@ Where <subdir> is one of the following:
    from the others, however, in that it uses the NxConsole driver to host
    the NSH shell.

-    Some of the differences in this configuration and the normal nsh configuration
-    include these settings in the defconfig file:
+    NOTES:

-    These select NX Multi-User mode:
+    1. This configuration uses the mconf-based configuration tool.  To
+       change this configurations using that tool, you should:

-      CONFG_NX_MULTIUSER=y
-      CONFIG_DISABLE_MQUEUE=n
+       a. Build and install the kconfig-mconf tool.  See nuttx/README.txt
+          and misc/tools/

-    The following definition in the defconfig file to enables the NxConsole
-    driver:
+       b. Execute 'make menuconfig' in nuttx/ in order to start the
+          reconfiguration process.

-      CONFIG_NXCONSOLE=y
+    2. Some of the differences in this configuration and the normal nsh
+       configuration include these settings in the defconfig file:

-    The appconfig file selects examples/nxconsole instead of examples/nsh:
+       These select NX Multi-User mode:

-      CONFIGURED_APPS += examples/nxconsole
+         CONFG_NX_MULTIUSER=y
+         CONFIG_DISABLE_MQUEUE=n

-    Other configuration settings:
+       The following definition in the defconfig file to enables the NxConsole
+       driver:

-      CONFIG_STM32_CODESOURCERYW=y  : CodeSourcery under Windows
-      CONFIG_LCD_LANDSCAPE=y        : 320x240 landscape
+         CONFIG_NXCONSOLE=y
+
+       And this selects examples/nxconsole instead of examples/nsh:
+
+         CONFIG_EXAMPLES_NXCONSOLE=y
+
+       LCD Orientation:
+
+         CONFIG_LCD_LANDSCAPE=y        : 320x240 landscape
+
+    3. Default build environment (also easily reconfigured):
+
+         CONFIG_HOST_WINDOWS=y                    : Windows
+         CONFIG_WINDOWS_CYGWIN=y                  : With Cygwin
+         CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYW=y  : CodeSourcery under Windows

  nxwm
  ----