diff --git a/configs/eagle100/httpd/defconfig b/configs/eagle100/httpd/defconfig index d36489d4312..d6ae777cdf2 100644 --- a/configs/eagle100/httpd/defconfig +++ b/configs/eagle100/httpd/defconfig @@ -64,8 +64,8 @@ # CONFIG_ARCH_CALIBRATION - Enables some build in instrumentation that # cause a 100 second delay during boot-up. This 100 second delay # serves no purpose other than it allows you to calibratre -# CONFIG_ARCH_LOOPSPERMSEC. You simply use a stop watch to measure -# the 100 second delay then adjust CONFIG_ARCH_LOOPSPERMSEC until +# CONFIG_BOARD_LOOPSPERMSEC. You simply use a stop watch to measure +# the 100 second delay then adjust CONFIG_BOARD_LOOPSPERMSEC until # the delay actually is 100 seconds. # CONFIG_ARCH=arm diff --git a/configs/eagle100/nettest/defconfig b/configs/eagle100/nettest/defconfig index 27ce4e73c84..c57b5a6f018 100644 --- a/configs/eagle100/nettest/defconfig +++ b/configs/eagle100/nettest/defconfig @@ -64,8 +64,8 @@ # CONFIG_ARCH_CALIBRATION - Enables some build in instrumentation that # cause a 100 second delay during boot-up. This 100 second delay # serves no purpose other than it allows you to calibratre -# CONFIG_ARCH_LOOPSPERMSEC. You simply use a stop watch to measure -# the 100 second delay then adjust CONFIG_ARCH_LOOPSPERMSEC until +# CONFIG_BOARD_LOOPSPERMSEC. You simply use a stop watch to measure +# the 100 second delay then adjust CONFIG_BOARD_LOOPSPERMSEC until # the delay actually is 100 seconds. # CONFIG_ARCH=arm diff --git a/configs/eagle100/nsh/defconfig b/configs/eagle100/nsh/defconfig index d49b9834fcf..d77c8b2810d 100644 --- a/configs/eagle100/nsh/defconfig +++ b/configs/eagle100/nsh/defconfig @@ -64,8 +64,8 @@ # CONFIG_ARCH_CALIBRATION - Enables some build in instrumentation that # cause a 100 second delay during boot-up. This 100 second delay # serves no purpose other than it allows you to calibratre -# CONFIG_ARCH_LOOPSPERMSEC. You simply use a stop watch to measure -# the 100 second delay then adjust CONFIG_ARCH_LOOPSPERMSEC until +# CONFIG_BOARD_LOOPSPERMSEC. You simply use a stop watch to measure +# the 100 second delay then adjust CONFIG_BOARD_LOOPSPERMSEC until # the delay actually is 100 seconds. # CONFIG_ARCH=arm diff --git a/configs/eagle100/nxflat/defconfig b/configs/eagle100/nxflat/defconfig index 8c64c616f85..291ecf074af 100644 --- a/configs/eagle100/nxflat/defconfig +++ b/configs/eagle100/nxflat/defconfig @@ -64,8 +64,8 @@ # CONFIG_ARCH_CALIBRATION - Enables some build in instrumentation that # cause a 100 second delay during boot-up. This 100 second delay # serves no purpose other than it allows you to calibratre -# CONFIG_ARCH_LOOPSPERMSEC. You simply use a stop watch to measure -# the 100 second delay then adjust CONFIG_ARCH_LOOPSPERMSEC until +# CONFIG_BOARD_LOOPSPERMSEC. You simply use a stop watch to measure +# the 100 second delay then adjust CONFIG_BOARD_LOOPSPERMSEC until # the delay actually is 100 seconds. # CONFIG_ARCH=arm diff --git a/configs/eagle100/ostest/defconfig b/configs/eagle100/ostest/defconfig index 5bf355cb887..8216e3b702a 100644 --- a/configs/eagle100/ostest/defconfig +++ b/configs/eagle100/ostest/defconfig @@ -64,8 +64,8 @@ # CONFIG_ARCH_CALIBRATION - Enables some build in instrumentation that # cause a 100 second delay during boot-up. This 100 second delay # serves no purpose other than it allows you to calibratre -# CONFIG_ARCH_LOOPSPERMSEC. You simply use a stop watch to measure -# the 100 second delay then adjust CONFIG_ARCH_LOOPSPERMSEC until +# CONFIG_BOARD_LOOPSPERMSEC. You simply use a stop watch to measure +# the 100 second delay then adjust CONFIG_BOARD_LOOPSPERMSEC until # the delay actually is 100 seconds. # CONFIG_ARCH=arm diff --git a/configs/eagle100/thttpd/defconfig b/configs/eagle100/thttpd/defconfig index c1ad521c560..dfbf14f9c70 100644 --- a/configs/eagle100/thttpd/defconfig +++ b/configs/eagle100/thttpd/defconfig @@ -64,8 +64,8 @@ # CONFIG_ARCH_CALIBRATION - Enables some build in instrumentation that # cause a 100 second delay during boot-up. This 100 second delay # serves no purpose other than it allows you to calibratre -# CONFIG_ARCH_LOOPSPERMSEC. You simply use a stop watch to measure -# the 100 second delay then adjust CONFIG_ARCH_LOOPSPERMSEC until +# CONFIG_BOARD_LOOPSPERMSEC. You simply use a stop watch to measure +# the 100 second delay then adjust CONFIG_BOARD_LOOPSPERMSEC until # the delay actually is 100 seconds. # CONFIG_ARCH=arm diff --git a/configs/stm3210e-eval/RIDE/defconfig b/configs/stm3210e-eval/RIDE/defconfig index 69836b9a261..8dd155c9970 100755 --- a/configs/stm3210e-eval/RIDE/defconfig +++ b/configs/stm3210e-eval/RIDE/defconfig @@ -62,9 +62,9 @@ # CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to board architecture. # CONFIG_ARCH_CALIBRATION - Enables some build in instrumentation that # cause a 100 second delay during boot-up. This 100 second delay -# serves no purpose other than it allows you to calibratre -# CONFIG_ARCH_LOOPSPERMSEC. You simply use a stop watch to measure -# the 100 second delay then adjust CONFIG_ARCH_LOOPSPERMSEC until +# serves no purpose other than it allows you to calibrate +# CONFIG_BOARD_LOOPSPERMSEC. You simply use a stop watch to measure +# the 100 second delay then adjust CONFIG_BOARD_LOOPSPERMSEC until # the delay actually is 100 seconds. # CONFIG_ARCH=arm @@ -74,7 +74,7 @@ CONFIG_ARCH_CHIP=stm32 CONFIG_ARCH_CHIP_STM32F103ZET6=y CONFIG_ARCH_BOARD=stm3210e-eval CONFIG_ARCH_BOARD_STM3210E_EVAL=y -CONFIG_BOARD_LOOPSPERMSEC=4531 +CONFIG_BOARD_LOOPSPERMSEC=5483 CONFIG_DRAM_SIZE=0x00010000 CONFIG_DRAM_START=0x20000000 CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) diff --git a/configs/stm3210e-eval/nsh/defconfig b/configs/stm3210e-eval/nsh/defconfig index 1ad71ef603b..18fab270444 100755 --- a/configs/stm3210e-eval/nsh/defconfig +++ b/configs/stm3210e-eval/nsh/defconfig @@ -62,9 +62,9 @@ # CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to board architecture. # CONFIG_ARCH_CALIBRATION - Enables some build in instrumentation that # cause a 100 second delay during boot-up. This 100 second delay -# serves no purpose other than it allows you to calibratre -# CONFIG_ARCH_LOOPSPERMSEC. You simply use a stop watch to measure -# the 100 second delay then adjust CONFIG_ARCH_LOOPSPERMSEC until +# serves no purpose other than it allows you to calibrate +# CONFIG_BOARD_LOOPSPERMSEC. You simply use a stop watch to measure +# the 100 second delay then adjust CONFIG_BOARD_LOOPSPERMSEC until # the delay actually is 100 seconds. # CONFIG_ARCH=arm @@ -74,7 +74,7 @@ CONFIG_ARCH_CHIP=stm32 CONFIG_ARCH_CHIP_STM32F103ZET6=y CONFIG_ARCH_BOARD=stm3210e-eval CONFIG_ARCH_BOARD_STM3210E_EVAL=y -CONFIG_BOARD_LOOPSPERMSEC=4531 +CONFIG_BOARD_LOOPSPERMSEC=5483 CONFIG_DRAM_SIZE=0x00010000 CONFIG_DRAM_START=0x20000000 CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) diff --git a/configs/stm3210e-eval/ostest/defconfig b/configs/stm3210e-eval/ostest/defconfig index f490ea9fc03..417dc538448 100755 --- a/configs/stm3210e-eval/ostest/defconfig +++ b/configs/stm3210e-eval/ostest/defconfig @@ -62,9 +62,9 @@ # CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to board architecture. # CONFIG_ARCH_CALIBRATION - Enables some build in instrumentation that # cause a 100 second delay during boot-up. This 100 second delay -# serves no purpose other than it allows you to calibratre -# CONFIG_ARCH_LOOPSPERMSEC. You simply use a stop watch to measure -# the 100 second delay then adjust CONFIG_ARCH_LOOPSPERMSEC until +# serves no purpose other than it allows you to calibrate +# CONFIG_BOARD_LOOPSPERMSEC. You simply use a stop watch to measure +# the 100 second delay then adjust CONFIG_BOARD_LOOPSPERMSEC until # the delay actually is 100 seconds. # CONFIG_ARCH=arm @@ -74,7 +74,7 @@ CONFIG_ARCH_CHIP=stm32 CONFIG_ARCH_CHIP_STM32F103ZET6=y CONFIG_ARCH_BOARD=stm3210e-eval CONFIG_ARCH_BOARD_STM3210E_EVAL=y -CONFIG_BOARD_LOOPSPERMSEC=4531 +CONFIG_BOARD_LOOPSPERMSEC=5483 CONFIG_DRAM_SIZE=0x00010000 CONFIG_DRAM_START=0x20000000 CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE)