Add PHY init logic

git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@3100 42af7a65-404d-4744-a932-0658087f49c3

configs/olimex-lpc1766stk/README.txt

@@ -601,6 +601,14 @@ Olimex LPC1766-STK Configuration Options
 	CONFIG_UARTn_PARTIY - 0=no parity, 1=odd parity, 2=even parity
 	CONFIG_UARTn_2STOP - Two stop bits
 
+
+  LPC17xx specific PHY/Ethernet device driver settings
+
+	CONFIG_PHY_KS8721 - Selects Micrel KS8721 PHY
+	CONFIG_PHY_AUTONEG - Enable auto-negotion
+	CONFIG_PHY_SPEED100 - Select 100Mbit vs. 10Mbit speed.
+	CONFIG_PHY_FDUPLEX - Select full (vs. half) duplex
+
   LPC17xx USB Configuration
 
 	CONFIG_LPC17_USBDEV_FRAME_INTERRUPT

configs/olimex-lpc1766stk/include/board.h

@@ -122,6 +122,11 @@
 #define CONFIG_LP17_FLASH          1
 #define BOARD_FLASHCFG_VALUE       0x0000303a
 
+/* Ethernet configuration */
+
+//#define ETH_MCFG_CLKSEL_DIV ETH_MCFG_CLKSEL_DIV44
+#define ETH_MCFG_CLKSEL_DIV ETH_MCFG_CLKSEL_DIV20
+
 /* LED definitions ******************************************************************/
 
                                       /* LED1 LED2 */

configs/olimex-lpc1766stk/nettest/defconfig

@@ -181,6 +181,19 @@ CONFIG_UART1_2STOP=0
 CONFIG_UART2_2STOP=0
 CONFIG_UART3_2STOP=0
 
+#
+# LPC17xx specific PHY/Ethernet device driver settings
+#
+# CONFIG_PHY_KS8721 - Selects Micrel KS8721 PHY
+# CONFIG_PHY_AUTONEG - Enable auto-negotion
+# CONFIG_PHY_SPEED100 - Select 100Mbit vs. 10Mbit speed.
+# CONFIG_PHY_FDUPLEX - Select full (vs. half) duplex
+#
+CONFIG_PHY_KS8721=y
+CONFIG_PHY_AUTONEG=y
+CONFIG_PHY_SPEED100=n
+CONFIG_PHY_FDUPLEX=y
+
 #
 # General build options
 #

configs/olimex-lpc1766stk/nsh/defconfig

@@ -181,6 +181,19 @@ CONFIG_UART1_2STOP=0
 CONFIG_UART2_2STOP=0
 CONFIG_UART3_2STOP=0
 
+#
+# LPC17xx specific PHY/Ethernet device driver settings
+#
+# CONFIG_PHY_KS8721 - Selects Micrel KS8721 PHY
+# CONFIG_PHY_AUTONEG - Enable auto-negotion
+# CONFIG_PHY_SPEED100 - Select 100Mbit vs. 10Mbit speed.
+# CONFIG_PHY_FDUPLEX - Select full (vs. half) duplex
+#
+CONFIG_PHY_KS8721=y
+CONFIG_PHY_AUTONEG=y
+CONFIG_PHY_SPEED100=n
+CONFIG_PHY_FDUPLEX=y
+
 #
 # General build options
 #

configs/olimex-lpc1766stk/ostest/defconfig

@@ -181,6 +181,19 @@ CONFIG_UART1_2STOP=0
 CONFIG_UART2_2STOP=0
 CONFIG_UART3_2STOP=0
 
+#
+# LPC17xx specific PHY/Ethernet device driver settings
+#
+# CONFIG_PHY_KS8721 - Selects Micrel KS8721 PHY
+# CONFIG_PHY_AUTONEG - Enable auto-negotion
+# CONFIG_PHY_SPEED100 - Select 100Mbit vs. 10Mbit speed.
+# CONFIG_PHY_FDUPLEX - Select full (vs. half) duplex
+#
+CONFIG_PHY_KS8721=y
+CONFIG_PHY_AUTONEG=y
+CONFIG_PHY_SPEED100=n
+CONFIG_PHY_FDUPLEX=y
+
 #
 # General build options
 #

configs/olimex-lpc1766stk/usbserial/defconfig

@@ -181,6 +181,19 @@ CONFIG_UART1_2STOP=0
 CONFIG_UART2_2STOP=0
 CONFIG_UART3_2STOP=0
 
+#
+# LPC17xx specific PHY/Ethernet device driver settings
+#
+# CONFIG_PHY_KS8721 - Selects Micrel KS8721 PHY
+# CONFIG_PHY_AUTONEG - Enable auto-negotion
+# CONFIG_PHY_SPEED100 - Select 100Mbit vs. 10Mbit speed.
+# CONFIG_PHY_FDUPLEX - Select full (vs. half) duplex
+#
+CONFIG_PHY_KS8721=y
+CONFIG_PHY_AUTONEG=y
+CONFIG_PHY_SPEED100=n
+CONFIG_PHY_FDUPLEX=y
+
 #
 # General build options
 #

configs/olimex-lpc1766stk/usbstorage/defconfig

@@ -181,6 +181,19 @@ CONFIG_UART1_2STOP=0
 CONFIG_UART2_2STOP=0
 CONFIG_UART3_2STOP=0
 
+#
+# LPC17xx specific PHY/Ethernet device driver settings
+#
+# CONFIG_PHY_KS8721 - Selects Micrel KS8721 PHY
+# CONFIG_PHY_AUTONEG - Enable auto-negotion
+# CONFIG_PHY_SPEED100 - Select 100Mbit vs. 10Mbit speed.
+# CONFIG_PHY_FDUPLEX - Select full (vs. half) duplex
+#
+CONFIG_PHY_KS8721=y
+CONFIG_PHY_AUTONEG=y
+CONFIG_PHY_SPEED100=n
+CONFIG_PHY_FDUPLEX=y
+
 #
 # General build options
 #