Last Updated: January 9, 2011
+Last Updated: January 10, 2011
-5.15 2010-12-12 Gregory Nutt <spudmonkey@racsa.co.cr> +nuttx-5.16 2011-01-10 Gregory Nutt <spudmonkey@racsa.co.cr> - * net/uip/uip_tcpaddsend.c and net/send.c -- Another place where the TCP sequence - number problem "fixed" in 5.14 might occur. - * net/send.c -- Check if the destination IP address is in the ARP table. If - not, then don't consider the packet sent. It won't be, an ARP packet will go - out instead. This improves behavior, for example, on the first GET request - from a browser. - * arch/arm/src/lpc17xx/lpc17_emacram.h and lpc17_allocateheap.c -- The Ethernet - logic was using all of AHB SRAM Bank0 for Ethernet packet buffers (16Kb). An - option was added to limit the amount of SRAM used for packet buffering and to - re-use any extra Bank0 memory for heap. configs/olimex-lpc1766stk/nettest - now uses only 8Kb at the beginning of Bank0; the 8Kb at the end of Bank0 is - included in the heap - * arch/arm/src/lpc17xx/lpc17_ssp.c -- Fix compilation errors when SSP1 is - selected. - * configs/olimex-lpc1766stk/nsh -- Enable network and SD/MMC card support in - NSH. Networking and telnetd interface as well as SPI-based microSD are - now functional. - * examples/nsh/nsh_netinit.c -- Fix NSH bug. If CONFIG_NET is selected, but - CONFIG_EXAMPLES_NSH_TELNETD is not selected, then the network is never - initialized and bad things happen if you try to ping. - * drivers/lcd -- Add header files for the Phillips PCF8833 LCD controller and - for the Epson S1D15G10 LCD controller. A driver for the Nokia 6100 LCD is - coming. - * include/nuttx/spi.h and almost all other SPI files -- Added an optional - cmddata() method to the SPI interface. Some devices require an additional - out-of-band bit to specify if the next word sent to the device is a command - or data. This is typical, for example, in "9-bit" displays where the 9th bit - is the CMD/DATA bit. The cmddata method provides selection of command or data. - * drivers/lcd/p14201.c -- Now uses the cmddata() method of the SPI interface. - * arch/arm/src/lpc17xx/lpc17_usbdev.c -- LPC17xx USB driver now appears to - to be fully functional. examples/usbstorage configuration verified (the - examples/usbserial configuration is untested). - * drivers/usbdev/usbserial.c and usbstorage.c -- All USB class drivers need - to call DEV_CONNECT() when they are ready to be enumerated. That is, - (1) initially when bound to the USB driver, and (2) after a USB reset. - * drivers/lcd/nokia6100.c -- A driver for the Nokia 6100 LCD. This driver - has not be verified as of the initial check-in. - * configs/olimex-lpc1766stk/nx -- A NX graphics configuration for the Olimex - LPC1766-STK board using the Nokia 6100 LCD driver. This configuration has - not been verified as of the initial check-in. - * include/nuttx/spi.h -- the SPI_SETBITS macro was calling the setmode method. - This is a very important bug-fix in some usages. + * include/nuttx/usb -- Created new directory. Moved all usb-related header + files to this new directory. Created a skeleton for a new USB host header + file + * drivers/usbhost -- Add USB host "registry" where connect devices can be + matched with the correct USB class driver. + * arc/arc/src/lpc17xx/lpc17_usbhost.c -- Add a simple USB host driver for + the NXP lpc17xx. + * drivers/usbhost -- Add generic USB device enumeration logic. + * drivers/usbhost -- Add a USB host class driver for the (Bulk-Only) USB + Mass Storage Class. pascal-2.0 2009-12-21 Gregory Nutt <spudmonkey@racsa.co.cr> @@ -2042,18 +2010,7 @@ buildroot-1.8 2009-12-21 <spudmonkey@racsa.co.cr>
-nuttx-5.16 2011-xx-xx Gregory Nutt <spudmonkey@racsa.co.cr> - - * include/nuttx/usb -- Created new directory. Moved all usb-related header - files to this new directory. Created a skeleton for a new USB host header - file - * drivers/usbhost -- Add USB host "registry" where connect devices can be - matched with the correct USB class driver. - * arc/arc/src/lpc17xx/lpc17_usbhost.c -- Add a simple USB host driver for - the NXP lpc17xx. - * drivers/usbhost -- Add generic USB device enumeration logic. - * drivers/usbhost -- Add a USB host class driver for the (Bulk-Only) USB - Mass Storage Class. +nuttx-5.17 2011-xx-xx Gregory Nutt <spudmonkey@racsa.co.cr> pascal-2.1 2010-xx-xx Gregory Nutt <spudmonkey@racsa.co.cr>