diff --git a/arch/arm/src/xmc4/chip/xmc4_scu.h b/arch/arm/src/xmc4/chip/xmc4_scu.h index 7e8b10bc7be..b48eebd824e 100644 --- a/arch/arm/src/xmc4/chip/xmc4_scu.h +++ b/arch/arm/src/xmc4/chip/xmc4_scu.h @@ -538,10 +538,10 @@ #define SCU_NMIREQEN_ /* Retention Memory Access Control Register */ -#define SCU_RMACR_RDWR (1 << 0) /* Bit 0: Hibernate Retention Memory Register Update Control */ -#define SCU_RMACR_ADDR_SHIFT (16) /* Bits 16-19: Hibernate Retention Memory Register Address Select */ -#define SCU_RMACR_ADDR_MASK (15 << SCU_RMACR_ADDR_SHIFT) -# define SCU_RMACR_ADDR(n) ((uint32_t)(n) << SCU_RMACR_ADDR_SHIFT) +#define SCU_RMACR_RDWR (1 << 0) /* Bit 0: Hibernate Retention Memory Register Update Control */ +#define SCU_RMACR_ADDR_SHIFT (16) /* Bits 16-19: Hibernate Retention Memory Register Address Select */ +#define SCU_RMACR_ADDR_MASK (15 << SCU_RMACR_ADDR_SHIFT) +# define SCU_RMACR_ADDR(n) ((uint32_t)(n) << SCU_RMACR_ADDR_SHIFT) /* Retention Memory Access Data Register (32-bit data) */ @@ -552,19 +552,98 @@ /* Parity Control Registers */ -#define SCU_PEEN_ +/* Parity Error Enable Register */ + +#define SCU_PEEN_PEENPS (1 << 0) /* Bit 0: Parity Error Enable for PSRAM */ +#define SCU_PEEN_PEENDS1 (1 << 1) /* Bit 1: Parity Error Enable for DSRAM1 */ +#define SCU_PEEN_PEENDS2 (1 << 2) /* Bit 2: Parity Error Enable for DSRAM2 */ +#define SCU_PEEN_PEENU0 (1 << 8) /* Bit 8: Parity Error Enable for USIC0 Memory */ +#define SCU_PEEN_PEENU1 (1 << 9) /* Bit 9: Parity Error Enable for USIC1 Memory */ +#define SCU_PEEN_PEENU2 (1 << 10) /* Bit 10: Parity Error Enable for USIC2 Memory */ +#define SCU_PEEN_PEENMC (1 << 12) /* Bit 12: Parity Error Enable for MultiCAN Memory */ +#define SCU_PEEN_PEENPPRF (1 << 13) /* Bit 13: Parity Error Enable for PMU Prefetch Memory */ +#define SCU_PEEN_PEENUSB (1 << 16) /* Bit 16: Parity Error Enable for USB Memory */ +#define SCU_PEEN_PEENETH0TX (1 << 17) /* Bit 17: Parity Error Enable for ETH TX Memory */ +#define SCU_PEEN_PEENETH0RX (1 << 18) /* Bit 18: Parity Error Enable for ETH RX Memory */ +#define SCU_PEEN_PEENSD0 (1 << 19) /* Bit 19: Parity Error Enable for SDMMC Memory 0 */ +#define SCU_PEEN_PEENSD1 (1 << 20) /* Bit 20: Parity Error Enable for SDMMC Memory 1 */ + /* Memory Checking Control Register */ -#define SCU_MCHKCON_ + +#define SCU_MCHKCON_SELPS (1 << 0) /* Bit 0: Select Memory Check for PSRAM */ +#define SCU_MCHKCON_SELDS1 (1 << 1) /* Bit 1: Select Memory Check for DSRAM1 */ +#define SCU_MCHKCON_SELDS2 (1 << 2) /* Bit 2: Select Memory Check for DSRAM2 */ +#define SCU_MCHKCON_USIC0DRA (1 << 8) /* Bit 8: Select Memory Check for USIC0 */ +#define SCU_MCHKCON_USIC1DRA (1 << 9) /* Bit 9: Select Memory Check for USIC1 */ +#define SCU_MCHKCON_USIC2DRA (1 << 10) /* Bit 10: Select Memory Check for USIC2 */ +#define SCU_MCHKCON_MCANDRA (1 << 12) /* Bit 12: Select Memory Check for MultiCAN */ +#define SCU_MCHKCON_PPRFDRA (1 << 13) /* Bit 13: Select Memory Check for PMU */ +#define SCU_MCHKCON_SELUSB (1 << 16) /* Bit 16: Select Memory Check for USB SRAM */ +#define SCU_MCHKCON_SELETH0TX (1 << 17) /* Bit 17: Select Memory Check for ETH0 TX SRAM */ +#define SCU_MCHKCON_SELETH0RX (1 << 18) /* Bit 18: Select Memory Check for ETH0 RX SRAM */ +#define SCU_MCHKCON_SELSD0 (1 << 19) /* Bit 19: Select Memory Check for SDMMC SRAM 0 */ +#define SCU_MCHKCON_SELSD1 (1 << 20) /* Bit 20: Select Memory Check for SDMMC SRAM 1 */ + /* Parity Error Trap Enable Register */ -#define SCU_PETE_ + +#define SCU_PETE_PETEPS (1 << 0) /* Bit 0: Parity Error Trap Enable for PSRAM */ +#define SCU_PETE_PETEDS1 (1 << 1) /* Bit 1: Parity Error Trap Enable for DSRAM1 */ +#define SCU_PETE_PETEDS2 (1 << 2) /* Bit 2: Parity Error Trap Enable for DSRAM2 */ +#define SCU_PETE_PETEU0 (1 << 8) /* Bit 8: Parity Error Trap Enable for USIC0 Memory */ +#define SCU_PETE_PETEU1 (1 << 9) /* Bit 9: Parity Error Trap Enable for USIC1 Memory */ +#define SCU_PETE_PETEU2 (1 << 10) /* Bit 10: Parity Error Trap Enable for USIC2 Memory */ +#define SCU_PETE_PETEMC (1 << 12) /* Bit 12: Parity Error Trap Enable for MultiCAN Memory */ +#define SCU_PETE_PETEPPRF (1 << 13) /* Bit 13: Parity Error Trap Enable for PMU Prefetch Memory */ +#define SCU_PETE_PETEUSB (1 << 16) /* Bit 16: Parity Error Trap Enable for USB Memory */ +#define SCU_PETE_PETEETH0TX (1 << 17) /* Bit 17: Parity Error Trap Enable for ETH0 TX Memory */ +#define SCU_PETE_PETEETH0RX (1 << 18) /* Bit 18: Parity Error Trap Enable for ETH0 RX Memory */ +#define SCU_PETE_PETESD0 (1 << 19) /* Bit 19: Parity Error Trap Enable for SDMMC SRAM 0 Memory */ +#define SCU_PETE_PETESD1 (1 << 20) /* Bit 20: Parity Error Trap Enable for SDMMC SRAM 1 Memory */ + /* Reset upon Parity Error Enable Register */ -#define SCU_PERSTEN_ + +#define SCU_PERSTEN_RSEN (1 << 0) /* Bit 0: System Reset Enable upon Parity Error Trap */ + /* Parity Error Control Register */ -#define SCU_PEFLAG_ + +#define SCU_PEFLAG_PEFPS (1 << 0) /* Bit 0: Parity Error Flag for PSRAM */ +#define SCU_PEFLAG_PEFDS1 (1 << 1) /* Bit 1: Parity Error Flag for DSRAM1 */ +#define SCU_PEFLAG_PEFDS2 (1 << 2) /* Bit 2: Parity Error Flag for DSRAM2 */ +#define SCU_PEFLAG_PEFU0 (1 << 8) /* Bit 8: Parity Error Flag for USIC0 Memory */ +#define SCU_PEFLAG_PEFU1 (1 << 9) /* Bit 9: Parity Error Flag for USIC1 Memory */ +#define SCU_PEFLAG_PEFU2 (1 << 10) /* Bit 10: Parity Error Flag for USIC2 Memory */ +#define SCU_PEFLAG_PEFMC (1 << 12) /* Bit 12: Parity Error Flag for MultiCAN Memory */ +#define SCU_PEFLAG_PEFPPRF (1 << 13) /* Bit 13: Parity Error Flag for PMU Prefetch Memory */ +#define SCU_PEFLAG_PEUSB (1 << 16) /* Bit 16: Parity Error Flag for USB Memory */ +#define SCU_PEFLAG_PEETH0TX (1 << 17) /* Bit 17: Parity Error Flag for ETH TX Memory */ +#define SCU_PEFLAG_PEETH0RX (1 << 18) /* Bit 18: Parity Error Flag for ETH RX Memory */ +#define SCU_PEFLAG_PESD0 (1 << 19) /* Bit 19: Parity Error Flag for SDMMC Memory 0 */ +#define SCU_PEFLAG_PESD1 (1 << 20) /* Bit 20: Parity Error Flag for SDMMC Memory 1 */ + /* Parity Memory Test Pattern Register */ -#define SCU_PMTPR_ + +#define SCU_PMTPR_PWR_SHIFT (0) /* Bits 0-7: Parity Read Values for Memory Test */ +#define SCU_PMTPR_PWR_MASK (0xff << SCU_PMTPR_PWR_SHIFT) +# define SCU_PMTPR_PWR(n) ((uint32_t)(n) << SCU_PMTPR_PWR_SHIFT) +#define SCU_PMTPR_PRD_SHIFT (8) /* Bits 8-15: Parity Write Values for Memory Test */ +#define SCU_PMTPR_PRD_MASK (0xff << SCU_PMTPR_PRD_SHIFT) +# define SCU_PMTPR_PRD(n) ((uint32_t)(n) << SCU_PMTPR_PRD_SHIFT) + /* Parity Memory Test Select Register */ -#define SCU_PMTSR_ + +#define SCU_PMTSR_MTENPS (1 << 0) /* Bit 0: Test Enable Control for PSRAM */ +#define SCU_PMTSR_MTENDS1 (1 << 1) /* Bit 1: Test Enable Control for DSRAM1 */ +#define SCU_PMTSR_MTENDS2 (1 << 2) /* Bit 2: Test Enable Control for DSRAM2 */ +#define SCU_PMTSR_MTEU0 (1 << 8) /* Bit 8: Test Enable Control for USIC0 Memory */ +#define SCU_PMTSR_MTEU1 (1 << 9) /* Bit 9: Test Enable Control for USIC1 Memory */ +#define SCU_PMTSR_MTEU2 (1 << 10) /* Bit 10: Test Enable Control for USIC2 Memory */ +#define SCU_PMTSR_MTEMC (1 << 12) /* Bit 12: Test Enable Control for MultiCAN Memory */ +#define SCU_PMTSR_MTEPPRF (1 << 13) /* Bit 13: Test Enable Control for PMU Prefetch Memory */ +#define SCU_PMTSR_MTUSB (1 << 16) /* Bit 16: Test Enable Control for USB Memory */ +#define SCU_PMTSR_MTETH0TX (1 << 17) /* Bit 17: Test Enable Control for ETH TX Memory */ +#define SCU_PMTSR_MTETH0RX (1 << 18) /* Bit 18: Test Enable Control for ETH RX Memory */ +#define SCU_PMTSR_MTSD0 (1 << 19) /* Bit 19: Test Enable Control for SDMMC Memory 0 */ +#define SCU_PMTSR_MTSD1 (1 << 20) /* Bit 20: Test Enable Control for SDMMC Memory 1 */ /* Trap Control Registers */ @@ -791,7 +870,7 @@ /* Peripheral Bus Clock Control */ -#define SCU_PBCLKCR_PBDIV_Pos (1 << 0) /* Bit 0: PB Clock Divider Enable */ +#define SCU_PBCLKCR_PBDIV (1 << 0) /* Bit 0: PB Clock Divider Enable */ # define SCU_PBCLKCR_PBDIV_FCPU (0) /* 0=fCPU */ # define SCU_PBCLKCR_PBDIV_DIV2 ((1 << 0) /* 1=fCPU/2 */ @@ -812,65 +891,102 @@ /* CCU Clock Control */ -#define SCU_CCUCLKCR_CCUDIV_Pos (1 << 0) /* Bit 0: CCU Clock Divider Enable */ -# define SCU_CCUCLKCR_CCUDIV_FSYS (0) /* 0= SYS */ -# define SCU_CCUCLKCR_CCUDIV_DIV2 (1 << 0) /* 1=fSYS/2 */ +#define SCU_CCUCLKCR_CCUDIV (1 << 0) /* Bit 0: CCU Clock Divider Enable */ +# define SCU_CCUCLKCR_CCUDIV_FSYS (0) /* 0= SYS */ +# define SCU_CCUCLKCR_CCUDIV_DIV2 (1 << 0) /* 1=fSYS/2 */ /* WDT Clock Control */ -#define SCU_WDTCLKCR_WDTDIV_SHIFT (0) /* Bits 0-7: WDT Clock Divider Value */ -#define SCU_WDTCLKCR_WDTDIV_MASK (0xff << SCU_WDTCLKCR_WDTDIV_SHIFT) -# define SCU_WDTCLKCR_WDTDIV(n) ((uint32_t)((n)-1) << SCU_WDTCLKCR_WDTDIV_SHIFT) -#define SCU_WDTCLKCR_WDTSEL_SHIFT (16) /* Bits 16-17: WDT Clock Selection Value */ -#define SCU_WDTCLKCR_WDTSEL_MASK (3 << SCU_WDTCLKCR_WDTSEL_SHIFT) -# define SCU_WDTCLKCR_WDTSEL_FOFI (0 << SCU_WDTCLKCR_WDTSEL_SHIFT) /* fOFI clock */ -# define SCU_WDTCLKCR_WDTSEL_FSTDY (1 << SCU_WDTCLKCR_WDTSEL_SHIFT) /* fSTDBY clock */ -# define SCU_WDTCLKCR_WDTSEL_FPLL (2 << SCU_WDTCLKCR_WDTSEL_SHIFT) /* fPLL clock */ +#define SCU_WDTCLKCR_WDTDIV_SHIFT (0) /* Bits 0-7: WDT Clock Divider Value */ +#define SCU_WDTCLKCR_WDTDIV_MASK (0xff << SCU_WDTCLKCR_WDTDIV_SHIFT) +# define SCU_WDTCLKCR_WDTDIV(n) ((uint32_t)((n)-1) << SCU_WDTCLKCR_WDTDIV_SHIFT) +#define SCU_WDTCLKCR_WDTSEL_SHIFT (16) /* Bits 16-17: WDT Clock Selection Value */ +#define SCU_WDTCLKCR_WDTSEL_MASK (3 << SCU_WDTCLKCR_WDTSEL_SHIFT) +# define SCU_WDTCLKCR_WDTSEL_FOFI (0 << SCU_WDTCLKCR_WDTSEL_SHIFT) /* fOFI clock */ +# define SCU_WDTCLKCR_WDTSEL_FSTDY (1 << SCU_WDTCLKCR_WDTSEL_SHIFT) /* fSTDBY clock */ +# define SCU_WDTCLKCR_WDTSEL_FPLL (2 << SCU_WDTCLKCR_WDTSEL_SHIFT) /* fPLL clock */ /* External clock Control Register */ -#define SCU_EXTCLKCR_ECKSEL_SHIFT (0) /* Bits 0-1: External Clock Selection Value */ -#define SCU_EXTCLKCR_ECKSEL_MASK (3 << SCU_EXTCLKCR_ECKSEL_SHIFT) -# define SCU_EXTCLKCR_ECKSEL_FSYS (0 << SCU_EXTCLKCR_ECKSEL_SHIFT) /* fSYS clock */ -# define SCU_EXTCLKCR_ECKSEL_FUSB (2 << SCU_EXTCLKCR_ECKSEL_SHIFT) /* fUSB clock divided by ECKDIV */ -# define SCU_EXTCLKCR_ECKSEL_FPLL (3 << SCU_EXTCLKCR_ECKSEL_SHIFT) /* fPLL clock divided by ECKDIV */ -#define SCU_EXTCLKCR_ECKDIV_SHIFT (16) /* Bits 16-24: External Clock Divider Value */ -#define SCU_EXTCLKCR_ECKDIV_MASK (0x1ff << SCU_EXTCLKCR_ECKDIV_SHIFT) -# define SCU_EXTCLKCR_ECKDIV(n) ((uint32_t)((n)-1) << SCU_EXTCLKCR_ECKDIV_SHIFT) +#define SCU_EXTCLKCR_ECKSEL_SHIFT (0) /* Bits 0-1: External Clock Selection Value */ +#define SCU_EXTCLKCR_ECKSEL_MASK (3 << SCU_EXTCLKCR_ECKSEL_SHIFT) +# define SCU_EXTCLKCR_ECKSEL_FSYS (0 << SCU_EXTCLKCR_ECKSEL_SHIFT) /* fSYS clock */ +# define SCU_EXTCLKCR_ECKSEL_FUSB (2 << SCU_EXTCLKCR_ECKSEL_SHIFT) /* fUSB clock divided by ECKDIV */ +# define SCU_EXTCLKCR_ECKSEL_FPLL (3 << SCU_EXTCLKCR_ECKSEL_SHIFT) /* fPLL clock divided by ECKDIV */ +#define SCU_EXTCLKCR_ECKDIV_SHIFT (16) /* Bits 16-24: External Clock Divider Value */ +#define SCU_EXTCLKCR_ECKDIV_MASK (0x1ff << SCU_EXTCLKCR_ECKDIV_SHIFT) +# define SCU_EXTCLKCR_ECKDIV(n) ((uint32_t)((n)-1) << SCU_EXTCLKCR_ECKDIV_SHIFT) /* Sleep Control Register */ -#define SCU_SLEEPCR_ + +#define SCU_SLEEPCR_SYSSEL (1 << 0) /* Bit 0: System Clock Selection Value */ +# define SCU_SLEEPCR_SYSSEL_OFI (0) /* 0=fOFI */ +# define SCU_SLEEPCR_SYSSEL_ PLL (1 << 0) /* 1=fPLL */ +#define SCU_SLEEPCR_USBCR (1 << 16) /* Bit 6: USB Clock Control in Sleep Mode */ +#define SCU_SLEEPCR_MMCCR (1 << 17) /* Bit 17: MMC Clock Control in Sleep Mode */ +#define SCU_SLEEPCR_ETH0CR (1 << 18) /* Bit 18: Ethernet Clock Control in Sleep Mode */ +#define SCU_SLEEPCR_EBUCR (1 << 19) /* Bit 19: EBU Clock Control in Sleep Mode */ +#define SCU_SLEEPCR_CCUCR (1 << 20) /* Bit 20: CCU Clock Control in Sleep Mode */ +#define SCU_SLEEPCR_WDTCR (1 << 21) /* Bit 21: WDT Clock Control in Sleep Mode */ + /* Deep Sleep Control Register */ -#define SCU_DSLEEPCR_ -/* Peripheral 0 Clock Gating Status */ -#define SCU_CGATSTAT0_ -/* Peripheral 0 Clock Gating Set */ -#define SCU_CGATSET0_ -/* Peripheral 0 Clock Gating Clear */ -#define SCU_CGATCLR0_ -/* Peripheral 1 Clock Gating Status */ -#define SCU_CGATSTAT1_ -/* Peripheral 1 Clock Gating Set */ -#define SCU_CGATSET1_ -/* Peripheral 1 Clock Gating Clear */ -#define SCU_CGATCLR1_ -/* Peripheral 2 Clock Gating Status */ -#define SCU_CGATSTAT2_ -/* Peripheral 2 Clock Gating Set */ -#define SCU_CGATSET2_ -/* Peripheral 2 Clock Gating Clear */ -#define SCU_CGATCLR2_ -/* Peripheral 3 Clock Gating Status */ -#define SCU_CGATSTAT3_ -/* Peripheral 3 Clock Gating Set */ -#define SCU_CGATSET3_ -/* Peripheral 3 Clock Gating Clear */ -#define SCU_CGATCLR3_ + +#define SCU_DSLEEPCR_SYSSEL (1 << 0) /* Bit 0: System Clock Selection Value */ +# define SCU_DSLEEPCR_SYSSEL_FOFI (0) /* 0=fOFI */ +# define SCU_DSLEEPCR_SYSSEL_FPLL (1 << 0) /* 1=fPLL */ +#define SCU_DSLEEPCR_FPDN (1 << 11) /* Bit 11: Flash Power Down */ +#define SCU_DSLEEPCR_PLLPDN (1 << 12) /* Bit 12: PLL Power Down */ +#define SCU_DSLEEPCR_VCOPDN (1 << 13) /* Bit 13: PLL Power Down */ +#define SCU_DSLEEPCR_USBCR (1 << 16) /* Bit 16: USB Clock Control in Deep Sleep Mode */ +#define SCU_DSLEEPCR_MMCCR (1 << 17) /* Bit 17: MMC Clock Control in Deep Sleep Mode */ +#define SCU_DSLEEPCR_ETH0CR (1 << 18) /* Bit 18: Ethernet Clock Control in Deep Sleep Mode */ +#define SCU_DSLEEPCR_EBUCR (1 << 19) /* Bit 19: EBU Clock Control in Deep Sleep Mode */ +#define SCU_DSLEEPCR_CCUCR (1 << 20) /* Bit 20: CCU Clock Control in Deep Sleep Mod */ +#define SCU_DSLEEPCR_WDTCR (1 << 21) /* Bit 21: WDT Clock Control in Deep Sleep Mode */ + +/* Peripheral 0 Clock Gating Status, Peripheral 0 Clock Gating Set, Peripheral 0 Clock Gating Clear */ + +#define SCU_CGAT0_VADC (1 << 0) /* Bit 0: */ +#define SCU_CGAT0_DSD (1 << 1) /* Bit 1: */ +#define SCU_CGAT0_CCU40 (1 << 2) /* Bit 2: */ +#define SCU_CGAT0_CCU41 (1 << 3) /* Bit 3: */ +#define SCU_CGAT0_CCU42 (1 << 4) /* Bit 4: */ +#define SCU_CGAT0_CCU80 (1 << 7) /* Bit 7: */ +#define SCU_CGAT0_CCU81 (1 << 8) /* Bit 8: */ +#define SCU_CGAT0_POSIF0 (1 << 9) /* Bit 9: */ +#define SCU_CGAT0_POSIF1 (1 << 10) /* Bit 10: */ +#define SCU_CGAT0_USIC0 (1 << 11) /* Bit 11: */ +#define SCU_CGAT0_ERU1_ (1 << 16) /* Bit 16: */ + +/* Peripheral 1 Clock Gating Status, Peripheral 1 Clock Gating Set, Peripheral 1 Clock Gating Clear */ + +#define SCU_CGATSTAT1_CCU43 (1 << 0) /* Bit 0: */ +#define SCU_CGATSTAT1_LEDTSCU0 (1 << 3) /* Bit 3: */ +#define SCU_CGATSTAT1_MCAN0 (1 << 4) /* Bit 4: */ +#define SCU_CGATSTAT1_DAC (1 << 5) /* Bit 5: */ +#define SCU_CGATSTAT1_MMCI (1 << 6) /* Bit 6: */ +#define SCU_CGATSTAT1_USIC1 (1 << 7) /* Bit 7: */ +#define SCU_CGATSTAT1_USIC2 (1 << 8) /* Bit 8: */ +#define SCU_CGATSTAT1_PPORTS (1 << 9) /* Bit 9: */ + +/* Peripheral 2 Clock Gating Status, Peripheral 2 Clock Gating Set, Peripheral 2 Clock Gating Clear */ + +#define SCU_CGATSTAT2_WDT (1 << 1) /* Bit 1: */ +#define SCU_CGATSTAT2_ETH0 (1 << 2) /* Bit 2: */ +#define SCU_CGATSTAT2_DMA0 (1 << 4) /* Bit 4: */ +#define SCU_CGATSTAT2_DMA1 (1 << 5) /* Bit 5: */ +#define SCU_CGATSTAT2_FCE (1 << 6) /* Bit 6: */ +#define SCU_CGATSTAT2_USB (1 << 7) /* Bit 7: */ + +/* Peripheral 3 Clock Gating Status, Peripheral 3 Clock Gating Set, Peripheral 3 Clock Gating Clear */ + +#define SCU_CGATSTAT3_EBU (1 << 2) /* Bit 2: */ /* Oscillator Control SCU Registers */ /* OSC_HP Status Register */ -#define SCU_OSCHPSTAT_ + +#define SCU_OSCHPSTAT_X1D (1 << 0) /* Bit 0: XTAL1 Data Value */ /* OSC_HP Control Register */ @@ -890,7 +1006,10 @@ # define SCU_OSCHPCTRL_OSCVAL(n) ((uint32_t)((n)-1) << SCU_OSCHPCTRL_OSCVAL_SHIFT) /* Clock Calibration Constant Register */ -#define SCU_CLKCALCONST_ + +#define SCU_CLKCALCONST_CALIBCONST_SHIFT (0) /* Bits 0-3: Clock Calibration Constant Value */ +#define SCU_CLKCALCONST_CALIBCONST_MASK (15 << SCU_CLKCALCONST_CALIBCONST_SHIFT) +# define SCU_CLKCALCONST_CALIBCONST(n) ((uint32_t)(n) << SCU_CLKCALCONST_CALIBCONST_SHIFT) /* PLL Control SCU Registers */