mirror of
https://github.com/apache/nuttx.git
synced 2026-06-05 15:58:59 +08:00
Add configuration for Future Electronics Group NE64 Badge board
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@3316 42af7a65-404d-4744-a932-0658087f49c3
This commit is contained in:
patacongo
+6
-1
@@ -895,7 +895,7 @@ configs/c5471evm
|
||||
|
||||
configs/demo9s12ne64
|
||||
Feescale DMO9S12NE64 board based on the MC9S12NE64 hcs12 cpu. This
|
||||
port uses the m68hc12 GCC toolchain. STATUS: Under development.
|
||||
port uses the m9s12x GCC toolchain. STATUS: Under development.
|
||||
|
||||
configs/ea3131
|
||||
Embedded Artists EA3131 Development bard. This board is based on the
|
||||
@@ -943,6 +943,11 @@ configs/mx1ads
|
||||
STATUS: This port is nearly code complete but still under development
|
||||
(work is stalled until I devote time to the Micromint Eagle-100)
|
||||
|
||||
configs/ne64badge
|
||||
Future Electronics Group NE64 /PoE Badge board based on the
|
||||
MC9S12NE64 hcs12 cpu. This port uses the m9s12x GCC toolchain.
|
||||
STATUS: Under development.
|
||||
|
||||
configs/ntosd-dm320
|
||||
This port uses the Neuros OSD v1.0 Dev Board with a GNU arm-elf
|
||||
toolchain*: see
|
||||
|
||||
@@ -284,7 +284,7 @@ HCS12/DEMO9S12NEC64-specific Configuration Options
|
||||
|
||||
CONFIG_ARCH_BOARD_name - For use in C code
|
||||
|
||||
CONFIG_ARCH_BOARD_DEMOS92S12NEC64 (for the Spectrum Digital C5471 EVM)
|
||||
CONFIG_ARCH_BOARD_DEMOS92S12NEC64 (for the Freescale DEMO9S12NE64 development board)
|
||||
|
||||
CONFIG_ARCH_LOOPSPERMSEC - Must be calibrated for correct operation
|
||||
of delay loops
|
||||
|
||||
@@ -44,7 +44,7 @@
|
||||
#include <debug.h>
|
||||
#include <errno.h>
|
||||
|
||||
#include "demo9sne64.h"
|
||||
#include "demo9s12ne64.h"
|
||||
|
||||
/****************************************************************************
|
||||
* Pre-Processor Definitions
|
||||
|
||||
Executable
+471
@@ -0,0 +1,471 @@
|
||||
README
|
||||
^^^^^^
|
||||
|
||||
This README discusses issues unique to NuttX configurations for the
|
||||
Future Electronics Group NE64 /PoE Badge board based on the
|
||||
MC9S12NE64 hcs12 cpu.
|
||||
|
||||
CONTENTS
|
||||
^^^^^^^^
|
||||
• MC9S12NE64 Features
|
||||
• NE64 Badge Pin Usage
|
||||
• Development Environment
|
||||
• NuttX Buildroot Toolchain
|
||||
• FreeScale HCS12 Serial Monitor
|
||||
• Soft Registers
|
||||
• HCS12/NE64BADGE-specific Configuration Options
|
||||
• Configurations
|
||||
|
||||
MC9S12NE64 Features
|
||||
^^^^^^^^^^^^^^^^^^^
|
||||
|
||||
• 16-bit HCS12 core
|
||||
- HCS12 CPU
|
||||
- Upward compatible with M68HC11 instruction set
|
||||
- Interrupt stacking and programmer’s model identical to M68HC11
|
||||
- Instruction queue
|
||||
- Enhanced indexed addressing
|
||||
- Memory map and interface (MMC)
|
||||
- Interrupt control (INT)
|
||||
- Background debug mode (BDM)
|
||||
- Enhanced debug12 module, including breakpoints and change-of-flow
|
||||
trace buffer (DBG)
|
||||
- Multiplexed expansion bus interface (MEBI) - available only in
|
||||
112-pin package version
|
||||
• Wakeup interrupt inputs
|
||||
- Up to 21 port bits available for wakeup interrupt function with
|
||||
digital filtering
|
||||
• Memory
|
||||
- 64K bytes of FLASH EEPROM
|
||||
- 8K bytes of RAM
|
||||
• Analog-to-digital converter (ATD)
|
||||
- One 8-channel module with 10-bit resolution
|
||||
- External conversion trigger capability
|
||||
• Timer module (TIM)
|
||||
- 4-channel timer
|
||||
- Each channel configurable as either input capture or output
|
||||
compare
|
||||
- Simple PWM mode
|
||||
- Modulo reset of timer counter
|
||||
- 16-bit pulse accumulator
|
||||
- External event counting
|
||||
- Gated time accumulation
|
||||
• Serial interfaces
|
||||
- Two asynchronous serial communications interface (SCI)
|
||||
- One synchronous serial peripheral interface (SPI)
|
||||
- One inter-IC bus (IIC)
|
||||
• Ethernet Media access controller (EMAC)
|
||||
- IEEE 802.3 compliant
|
||||
- Medium-independent interface (MII)
|
||||
- Full-duplex and half-duplex modes
|
||||
- Flow control using pause frames
|
||||
- MII management function
|
||||
- Address recognition
|
||||
- Frames with broadcast address are always accepted or always
|
||||
rejected
|
||||
- Exact match for single 48-bit individual (unicast) address
|
||||
- Hash (64-bit hash) check of group (multicast) addresses
|
||||
- Promiscuous mode
|
||||
• Ethertype filter
|
||||
• Loopback mode
|
||||
• Two receive and one transmit Ethernet buffer interfaces
|
||||
• Ethernet 10/100 Mbps transceiver (EPHY)
|
||||
- IEEE 802.3 compliant
|
||||
- Digital adaptive equalization
|
||||
- Half-duplex and full-duplex
|
||||
- Auto-negotiation next page ability
|
||||
- Baseline wander (BLW) correction
|
||||
- 125-MHz clock generator and timing recovery
|
||||
- Integrated wave-shaping circuitry
|
||||
- Loopback modes
|
||||
• CRG (clock and reset generator module)
|
||||
- Windowed COP watchdog
|
||||
- Real-time interrupt
|
||||
- Clock monitor
|
||||
- Pierce oscillator
|
||||
- Phase-locked loop clock frequency multiplier
|
||||
- Limp home mode in absence of external clock
|
||||
- 25-MHz crystal oscillator reference clock
|
||||
• Operating frequency
|
||||
- 50 MHz equivalent to 25 MHz bus speed for single chip
|
||||
- 32 MHz equivalent to 16 MHz bus speed in expanded bus modes
|
||||
• Internal 2.5-V regulator
|
||||
- Supports an input voltage range from 3.3 V ± 5%
|
||||
- Low-power mode capability
|
||||
- Includes low-voltage reset (LVR) circuitry
|
||||
• 80-pin TQFP-EP or 112-pin LQFP package
|
||||
- Up to 70 I/O pins with 3.3 V input and drive capability (112-pin
|
||||
package)
|
||||
- Up to two dedicated 3.3 V input only lines (IRQ, XIRQ)
|
||||
• Development support
|
||||
- Single-wire background debug™ mode (BDM)
|
||||
- On-chip hardware breakpoints
|
||||
- Enhanced DBG debug features
|
||||
|
||||
NE64 Badge Pin Usage
|
||||
^^^^^^^^^^^^^^^^^^^^
|
||||
|
||||
PIN PIN NAME BOARD SIGNAL NOTES
|
||||
--- ------------------- -------------- ----------------------
|
||||
44 RESET J3 RESET_L Also to SW3
|
||||
57 BKGD/MODC/TAGHI_B BDM BKGD CON6A
|
||||
|
||||
86 PAD1 J3 ANALOG_IN0 Not used on board
|
||||
87 PAD2 J3 ANALOG_IN1 " " " " "" " "
|
||||
88 PAD3 J3 ANALOG_IN2 " " " " "" " "
|
||||
89 PAD4 J3 ANALOG_IN3 " " " " "" " "
|
||||
|
||||
70 PHY_TXP J7 TD+ RJ45 connector
|
||||
71 PHY_TXN J7 TD- RJ45 connector
|
||||
73 PHY_RXP J7 RD+ RJ45 connector
|
||||
74 PHY_RXN J7 RD- RJ45 connector
|
||||
|
||||
51 PL6/TXER/KWL6 N/C N/C
|
||||
52 PL5/TXDV/KWL5 N/C N/C
|
||||
58 PL4/COLLED Collision LED red
|
||||
59 PL3/DUPLED Full Duplex LED yellow
|
||||
81 PL2/SPDLED 100Mbps Speed LED yellow
|
||||
83 PL1/LNKLED Link Good LED green
|
||||
84 PL0/ACTLED Activity LED yellow
|
||||
|
||||
60 PA0/ADDR8/DATA8 J3 ADDR_DATA8 Not used on board
|
||||
61 PA1/ADDR9/DATA9 J3 ADDR_DATA9 " " " " "" " "
|
||||
62 PA2/ADDR10/DATA10 J3 ADDR_DATA10 " " " " "" " "
|
||||
63 PA3/ADDR11/DATA11 J3 ADDR_DATA11 " " " " "" " "
|
||||
77 PA4/ADDR12/DATA12 J3 ADDR_DATA12 " " " " "" " "
|
||||
78 PA5/ADDR13/DATA13 J3 ADDR_DATA13 " " " " "" " "
|
||||
79 PA6/ADDR14/DATA14 J3 ADDR_DATA14 " " " " "" " "
|
||||
80 PA7/ADDR15/DATA15 J3 ADDR_DATA15 " " " " "" " "
|
||||
|
||||
10 PB0/ADDR0/DATA0 J3 ADDR_DATA0 Not used on board
|
||||
11 PB1/ADDR1/DATA1 J3 ADDR_DATA1 " " " " "" " "
|
||||
12 PB2/ADDR2/DATA2 J3 ADDR_DATA2 " " " " "" " "
|
||||
13 PB3/ADDR3/DATA3 J3 ADDR_DATA3 " " " " "" " "
|
||||
16 PB4/ADDR4/DATA4 J3 ADDR_DATA4 " " " " "" " "
|
||||
17 PB5/ADDR5/DATA5 J3 ADDR_DATA5 " " " " "" " "
|
||||
18 PB6/ADDR6/DATA6 J3 ADDR_DATA6 " " " " "" " "
|
||||
19 PB7/ADDR7/DATA7 J3 ADDR_DATA7 " " " " "" " "
|
||||
|
||||
97 PK0/XADR14 N/C N/C
|
||||
98 PK1/XADR15 N/C N/C
|
||||
99 PK2/XADR16 N/C N/C
|
||||
100 PK3/XADR17 N/C N/C
|
||||
103 PK4/XADR18 N/C N/C
|
||||
104 PK5/XADR19 N/C N/C
|
||||
105 PK6/XCS_B J3 XCS Not used on board
|
||||
106 PK7/ECS_B/ROMCTL J3 ECS " " " " "" " "
|
||||
|
||||
56 PE0/XIRQ_B BUTTON1 SW1
|
||||
55 PE1/IRQ_B J3 IRQ Not used on board
|
||||
54 PE2/R_W J3 RW " " " " "" " "
|
||||
53 PE3/LSTRB_B/TAGLO_B J3 LSTRB " " " " "" " "
|
||||
41 PE4/ECLK J3 ECLK " " " " "" " "
|
||||
40 PE5/IPIPE0/MODA J3 MODA " " " " "" " "
|
||||
39 PE6/IPIPE1/MODB J3 MODB " " " " "" " "
|
||||
38 PE7/NOACC/XCLKS_B pulled low pulled low
|
||||
|
||||
110 PT4/IOC1_4 J3 GPIO8 Not used on board
|
||||
109 PT5/IOC1_5 J3 GPIO9 " " " " "" " "
|
||||
108 PT6/IOC1_6 J3 GPIO10 " " " " "" " "
|
||||
107 PT7/IOC1_7 N/C N/C
|
||||
|
||||
22 PG0/RXD0/KWG0 J3 GPIO0 Not used on board
|
||||
23 PG1/RXD1/KWG1 J3 GPIO1 " " " " "" " "
|
||||
24 PG2/RXD2/KWG2 J3 GPIO2 " " " " "" " "
|
||||
25 PG3/RXD3/KWG3 J3 GPIO3 " " " " "" " "
|
||||
26 PG4/RXCLK/KWG4 J3 GPIO4 " " " " "" " "
|
||||
27 PG5/RXDV/KWG5 J3 GPIO5 " " " " "" " "
|
||||
28 PG6/RXER/KWG6 J3 GPIO6 " " " " "" " "
|
||||
29 PG7/KWG7 J3 GPIO7 " " " " "" " "
|
||||
|
||||
8 PJ0/MDC/KWJ0 LED1 D21, red
|
||||
9 PJ1/MDIO/KWJ1 LED2 D22, red
|
||||
20 PJ2/CRS/KWJ2 J3 SPI_CS Not used on board
|
||||
21 PJ3/COL/KWJ3 N/C
|
||||
112 PJ6/SDA/KWJ6 J3 I2C_DATA Not used on board
|
||||
111 PJ7/SCL/KWJ7 J3 I2C_CLOCK " " " " "" " "
|
||||
|
||||
30 PS0/RXD0 RS232_RX Eventually maps to J2 RXD
|
||||
31 PS1/TXD0 RS232_TX Eventually maps to J2 TXD
|
||||
32 PS2/RXD1 J3&J4 UART_RX Not used on board
|
||||
33 PS3/TXD1 J3&J4 UART_TX " " " " "" " "
|
||||
34 PS4/MISO J3 SPI_MISO " " " " "" " "
|
||||
35 PS5/MOSI J3 SPI_MOSI " " " " "" " "
|
||||
36 PS6/SCK J3 SPI_CLOCK " " " " "" " "
|
||||
37 PS7/SS_B J3 SPI_SS " " " " "" " "
|
||||
|
||||
7 PH0/TXD0/KWH0 N/C N/C
|
||||
6 PH1/TXD1/KWH1 N/C N/C
|
||||
5 PH2/TXD2/KWH2 J4 XBEE_RESET Not used on board
|
||||
4 PH3/TXD3/KWH3 J4 XBEE_RSSI Not used on board
|
||||
3 PH4/TXCLK/KWH4 BUTTON2 SW2
|
||||
2 PH5/TXDV/KWH5 J5 XBEE_LOAD_H Not used on board
|
||||
1 PH6/TXER/KWH6 J4 XBEE_LOAD_L Not used on board
|
||||
|
||||
Development Environment
|
||||
^^^^^^^^^^^^^^^^^^^^^^^
|
||||
|
||||
Either Linux or Cygwin on Windows can be used for the development
|
||||
environment. The source has been built only using the GNU toolchain
|
||||
(see below). Other toolchains will likely cause problems.
|
||||
|
||||
NuttX Buildroot Toolchain
|
||||
^^^^^^^^^^^^^^^^^^^^^^^^^
|
||||
|
||||
A GNU GCC-based toolchain is assumed. The files */setenv.sh should
|
||||
be modified to point to the correct path to the HC12 GCC toolchain (if
|
||||
different from the default in your PATH variable).
|
||||
|
||||
If you have no HC12 toolchain, one can be downloaded from the NuttX
|
||||
SourceForge download site (https://sourceforge.net/project/showfiles.php?group_id=189573).
|
||||
This GNU toolchain builds and executes in the Linux or Cygwin
|
||||
environments.
|
||||
|
||||
1. You must have already configured Nuttx in <some-dir>/nuttx.
|
||||
|
||||
cd tools
|
||||
./configure.sh ne64badge/<sub-dir>
|
||||
|
||||
2. Download the latest buildroot package into <some-dir>
|
||||
|
||||
3. unpack the buildroot tarball. The resulting directory may
|
||||
have versioning information on it like buildroot-x.y.z. If so,
|
||||
rename <some-dir>/buildroot-x.y.z to <some-dir>/buildroot.
|
||||
|
||||
4. cd <some-dir>/buildroot
|
||||
|
||||
5. cp configs/m9s12x-defconfig-3.3.6 .config
|
||||
|
||||
6. make oldconfig
|
||||
|
||||
7. make
|
||||
|
||||
If the make fails because it can't find the file to download, you may
|
||||
have to locate the file on the internet and download it into the archives/
|
||||
directory manually. For example, binutils-2.18 can be found here:
|
||||
http://ftp.gnu.org/gnu/binutils/
|
||||
|
||||
8. Edit setenv.h, if necessary, so that the PATH variable includes
|
||||
the path to the newly built binaries.
|
||||
|
||||
See the file configs/README.txt in the buildroot source tree. That has more
|
||||
detailed PLUS some special instructions that you will need to follow if you are
|
||||
building a Cortex-M3 toolchain for Cygwin under Windows.
|
||||
|
||||
FreeScale HCS12 Serial Monitor
|
||||
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
||||
|
||||
General:
|
||||
The NuttX HCS12 port is configured to use the Freescale HCS serial
|
||||
monitor. This monitor supports primitive debug commands that allow
|
||||
FLASH/EEPROM programming and debugging through an RS-232 serial
|
||||
interface. The serial monior is 2Kb in size and resides in FLASH at
|
||||
addresses 0xf800-0xffff. The monitor does not use any RAM other than
|
||||
the stack itself.
|
||||
|
||||
AN2458
|
||||
The serial monitor is described in detail in Freescale Application
|
||||
Note AN2458.pdf.
|
||||
|
||||
COP:
|
||||
The serial monitor uses the COP for the cold reset function and should
|
||||
not be used by the application without some precautions (see AN2458).
|
||||
|
||||
Clocking:
|
||||
The serial monitor sets the operating frequency to 24 MHz. This is
|
||||
not altered by the NuttX start-up; doing so would interfere with the
|
||||
operation of the serial monitor.
|
||||
|
||||
Memory Configuration:
|
||||
Registers:
|
||||
• Register space is located at 0x0000–0x03ff.
|
||||
FLASH:
|
||||
• FLASH memory is any address greater than 0x4000. All paged
|
||||
addresses are assumed to be FLASH memory.
|
||||
• Application code should exclude the 0xf780–0xff7f memory.
|
||||
SRAM:
|
||||
• RAM ends at 0x3FFF and builds down to the limit of the device’s
|
||||
available RAM.
|
||||
• The serial monitor's stack pointer is set to the end of RAM+1
|
||||
(0x4000).
|
||||
EEPROM:
|
||||
• EEPROM (if the target device has any) is limited to the available
|
||||
space between the registers and the RAM (0x0400–to start of RAM).
|
||||
External Devices:
|
||||
• External devices attached to the multiplexed external bus
|
||||
interface are not supported
|
||||
|
||||
Serial Communications:
|
||||
The serial monitor uses RS-232 serial communications through SCI0 at
|
||||
115,200 baud. The monitor must have exclusive use of this interface.
|
||||
Access to the serial port is available through a monitor jump table.
|
||||
|
||||
Interrrupts:
|
||||
The serial monitor redirects interrupt vectors to an unprotected
|
||||
portion of FLASH just before the protected monitor program
|
||||
(0xf780–0xf7fe). The monitor will automatically redirect vector
|
||||
programming operations to these user vectors. The user code should
|
||||
therefore keep the normal (non-monitor) vector locations
|
||||
(0xff80–0xfffe).
|
||||
|
||||
Soft Registers
|
||||
^^^^^^^^^^^^^^
|
||||
|
||||
The mc68hcs12 compilation is prone to errors like the following:
|
||||
|
||||
CC: lib_b16sin.c
|
||||
lib_b16sin.c: In function `b16sin':
|
||||
lib_b16sin.c:110: error: unable to find a register to spill in class `S_REGS'
|
||||
lib_b16sin.c:110: error: this is the insn:
|
||||
(insn:HI 41 46 44 8 (parallel [
|
||||
(set (subreg:SI (reg:DI 58 [ rad ]) 4)
|
||||
(reg/v:SI 54 [ rad ]))
|
||||
(clobber (scratch:HI))
|
||||
]) 20 {movsi_internal} (insn_list 46 (nil))
|
||||
(expr_list:REG_UNUSED (scratch:HI)
|
||||
(expr_list:REG_NO_CONFLICT (reg/v:SI 54 [ rad ])
|
||||
(nil))))
|
||||
lib_b16sin.c:110: confused by earlier errors, bailing out
|
||||
|
||||
There are several ways that this error could be fixed:
|
||||
|
||||
1. Increase the number of soft registers (i.e., "fake" registers defined
|
||||
at fixed memory locations). This can be done by adding something like
|
||||
-msoft-reg-count=4 to the CFLAGS. This approach was not taken
|
||||
because:
|
||||
|
||||
- This slows hcs12 performance
|
||||
- All of these soft registers wouil have to be saved and restored
|
||||
on every interrupt and context switch.
|
||||
|
||||
2. Lowering the optimization level by dropping -Os to -O2 or, more likely,
|
||||
by removing -fomit-frame-pointer. Also not desireable becauase 99% of the
|
||||
files that do not have this problem also increase in size. Special case
|
||||
compilation with reduced optimization levels just for the files that need
|
||||
it could be done, but this would complicate the make system.
|
||||
|
||||
3. Restructuring files to reduce the complexity. If you add local variables
|
||||
to hold intermediate computational results, this error can be eliminated.
|
||||
This is the approach taken in NuttX. It has disadvantages only in that
|
||||
(1) it takes some effort and good guessing to eliminate the problem, and (2)
|
||||
the problem is not really eliminated -- it can and will re-occur when files
|
||||
are changed or new files are added.
|
||||
|
||||
4. Many files are built that are needed by DEM09S12NE64. Another very simple
|
||||
option if those problem files are needed is to just remove the offending
|
||||
files from the Make.defs file so that they no longer cause a problem.
|
||||
|
||||
HCS12/NE64BADGE-specific Configuration Options
|
||||
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
||||
|
||||
CONFIG_ARCH - Identifies the arch/ subdirectory. This should
|
||||
be set to:
|
||||
|
||||
CONFIG_ARCH=hc
|
||||
|
||||
CONFIG_ARCH_family - For use in C code:
|
||||
|
||||
CONFIG_ARCH_HC=y
|
||||
|
||||
CONFIG_ARCH_architecture - For use in C code:
|
||||
|
||||
CONFIG_ARCH_HCS12=y
|
||||
|
||||
CONFIG_ARCH_CHIP - Identifies the arch/*/chip subdirectory
|
||||
|
||||
CONFIG_ARCH_CHIP=mc92s12nec64
|
||||
|
||||
CONFIG_ARCH_CHIP_name - For use in C code
|
||||
|
||||
CONFIG_ARCH_CHIP_MCS92S12NEC64
|
||||
|
||||
CONFIG_ARCH_BOARD - Identifies the configs subdirectory and
|
||||
hence, the board that supports the particular chip or SoC.
|
||||
|
||||
CONFIG_ARCH_BOARD=ne64badge
|
||||
|
||||
CONFIG_ARCH_BOARD_name - For use in C code
|
||||
|
||||
CONFIG_ARCH_BOARD_NE64BADGE (for the Future Electronics Group NE64 Badge)
|
||||
|
||||
CONFIG_ARCH_LOOPSPERMSEC - Must be calibrated for correct operation
|
||||
of delay loops
|
||||
|
||||
CONFIG_ENDIAN_BIG - define if big endian (default is little
|
||||
endian)
|
||||
|
||||
CONFIG_DRAM_SIZE - Describes the installed RAM.
|
||||
|
||||
CONFIG_DRAM_START - The start address of installed RAM
|
||||
|
||||
CONFIG_DRAM_END - Should be (CONFIG_DRAM_START+CONFIG_DRAM_SIZE)
|
||||
|
||||
CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to boards that
|
||||
have LEDs
|
||||
|
||||
CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt
|
||||
stack. If defined, this symbol is the size of the interrupt
|
||||
stack in bytes. If not defined, the user task stacks will be
|
||||
used during interrupt handling.
|
||||
|
||||
CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions
|
||||
|
||||
CONFIG_ARCH_CALIBRATION - Enables some build in instrumentation that
|
||||
cause a 100 second delay during boot-up. This 100 second delay
|
||||
serves no purpose other than it allows you to calibratre
|
||||
CONFIG_ARCH_LOOPSPERMSEC. You simply use a stop watch to measure
|
||||
the 100 second delay then adjust CONFIG_ARCH_LOOPSPERMSEC until
|
||||
the delay actually is 100 seconds.
|
||||
|
||||
HCS12 build options:
|
||||
|
||||
CONFIG_HCS12_SERIALMON - Indicates that the target systems uses
|
||||
the Freescale serial bootloader.
|
||||
|
||||
CONFIG_HCS12_NONBANKED - Indicates that the target systems does not
|
||||
support banking. Only short calls are made; one fixed page is
|
||||
presented the the paging window. Only 48Kb of FLASH is usable
|
||||
in this configuration: pages 3e, 3d, then 3f will appear as a
|
||||
contiguous address space in memory.
|
||||
|
||||
HCS12 Sub-system support
|
||||
|
||||
CONFIG_HCS12_SCI0
|
||||
CONFIG_HCS12_SCI1
|
||||
|
||||
HCS12 specific device driver settings:
|
||||
|
||||
CONFIG_SCIn_SERIAL_CONSOLE - selects SCIn for the console and ttys0
|
||||
(default is the SCI0).
|
||||
|
||||
CONFIG_SCIn_RXBUFSIZE - Characters are buffered as received.
|
||||
This specific the size of the receive buffer
|
||||
|
||||
CONFIG_SCIn_TXBUFSIZE - Characters are buffered before
|
||||
being sent. This specific the size of the transmit buffer
|
||||
|
||||
CONFIG_SCIn_BAUD - The configure BAUD of the UART.
|
||||
|
||||
CONFIG_SCIn_BITS - The number of bits. Must be either 7 or 8.
|
||||
|
||||
CONFIG_SCIn_PARTIY - 0=no parity, 1=odd parity, 2=even parity, 3=mark 1, 4=space 0
|
||||
|
||||
CONFIG_SCIn_2STOP - Two stop bits
|
||||
|
||||
Configurations
|
||||
^^^^^^^^^^^^^^
|
||||
|
||||
Each Freescale HCS12 configuration is maintained in a sudirectory and
|
||||
can be selected as follow:
|
||||
|
||||
cd tools
|
||||
./configure.sh ne64badge/<subdir>
|
||||
cd -
|
||||
. ./setenv.sh
|
||||
|
||||
Where <subdir> is one of the following:
|
||||
|
||||
ostest:
|
||||
This configuration directory, performs a simple OS test using
|
||||
examples/ostest.
|
||||
|
||||
Executable
+143
@@ -0,0 +1,143 @@
|
||||
/************************************************************************************
|
||||
* configs/ne64badge/include/board.h
|
||||
* include/arch/board/board.h
|
||||
*
|
||||
* Copyright (C) 2011 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
#ifndef __ARCH_BOARD_BOARD_H
|
||||
#define __ARCH_BOARD_BOARD_H
|
||||
|
||||
/************************************************************************************
|
||||
* Included Files
|
||||
************************************************************************************/
|
||||
|
||||
#include <nuttx/config.h>
|
||||
#ifndef __ASSEMBLY__
|
||||
# include <stdint.h>
|
||||
#endif
|
||||
|
||||
/************************************************************************************
|
||||
* Definitions
|
||||
************************************************************************************/
|
||||
|
||||
/* Clocking *************************************************************************/
|
||||
/* Frequency of the crystal oscillator */
|
||||
|
||||
#define HCS12_OSCCLK 16000000 /* 16MHz */
|
||||
|
||||
/* PLL Settings
|
||||
*
|
||||
* SYNR register controls the multiplication factor of the PLL. If the PLL is on, the
|
||||
* count in the loop divider (SYNR) register effectively multiplies up the PLL clock
|
||||
* (PLLCLK) from the reference frequency by 2 x (SYNR+1). PLLCLK will not be below
|
||||
* the minimum VCO frequency (fSCM).
|
||||
*
|
||||
* The REFDV register provides a finer granularity for the PLL multiplier steps. The
|
||||
* count in the reference divider divides OSCCLK frequency by REFDV + 1.
|
||||
*
|
||||
* PLLCLK = 2 * OSCCLK * (SYNR + 1) / (REFDV + 1)
|
||||
*
|
||||
* If (PLLSEL = 1), Bus Clock = PLLCLK / 2
|
||||
*/
|
||||
|
||||
#define HCS12_SYNR_VALUE 0x15
|
||||
#define HCS12_REFDV_VALUE 0x15
|
||||
#define HCS12_PLLCLK (2*HCS12_OSCCLK*(HCS12_SYNR+1)/(HCS12_REFDV+1))
|
||||
#define HCS12_BUSCLK (HSC12_PLLCLK/2)
|
||||
|
||||
/* LED definitions ******************************************************************/
|
||||
|
||||
/* The NE64 Badge board has 2 red LEDs that we will encode as: */
|
||||
|
||||
#define LED_STARTED 1 /* LED1 */
|
||||
#define LED_HEAPALLOCATE 1 /* LED1 */
|
||||
#define LED_IRQSENABLED 1 /* LED1 */
|
||||
#define LED_STACKCREATED 1 /* LED1 */
|
||||
#define LED_INIRQ 2 /* LED1 + LED2 */
|
||||
#define LED_SIGNAL 2 /* LED1 + LED2 */
|
||||
#define LED_ASSERTION 2 /* LED1 + LED2 */
|
||||
#define LED_PANIC 7 /* LED2 + N/C */
|
||||
|
||||
/* Button definitions ***************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Public Data
|
||||
************************************************************************************/
|
||||
|
||||
#ifndef __ASSEMBLY__
|
||||
|
||||
#undef EXTERN
|
||||
#if defined(__cplusplus)
|
||||
#define EXTERN extern "C"
|
||||
extern "C" {
|
||||
#else
|
||||
#define EXTERN extern
|
||||
#endif
|
||||
|
||||
/************************************************************************************
|
||||
* Public Function Prototypes
|
||||
************************************************************************************/
|
||||
/************************************************************************************
|
||||
* Name: hcs12_boardinitialize
|
||||
*
|
||||
* Description:
|
||||
* All HCS12 architectures must provide the following entry point. This entry point
|
||||
* is called early in the intitialization -- after all memory has been configured
|
||||
* and mapped but before any devices have been initialized.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
EXTERN void hcs12_boardinitialize(void);
|
||||
|
||||
/************************************************************************************
|
||||
* Button support.
|
||||
*
|
||||
* Description:
|
||||
* up_buttoninit() must be called to initialize button resources. After that,
|
||||
* up_buttons() may be called to collect the state of all buttons. up_buttons()
|
||||
* returns an bit set with bits corresponding to the state of each button.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
#ifdef CONFIG_ARCH_BUTTONS
|
||||
EXTERN void up_buttoninit(void);
|
||||
EXTERN uint8_t up_buttons(void);
|
||||
#endif
|
||||
|
||||
#undef EXTERN
|
||||
#if defined(__cplusplus)
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __ASSEMBLY__ */
|
||||
#endif /* __ARCH_BOARD_BOARD_H */
|
||||
Executable
+152
@@ -0,0 +1,152 @@
|
||||
############################################################################
|
||||
# configs/ne64badge/ostest/Make.defs
|
||||
#
|
||||
# Copyright (C) 2011 Gregory Nutt. All rights reserved.
|
||||
# Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions
|
||||
# are met:
|
||||
#
|
||||
# 1. Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# 2. Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in
|
||||
# the documentation and/or other materials provided with the
|
||||
# distribution.
|
||||
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||
# used to endorse or promote products derived from this software
|
||||
# without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
# POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
############################################################################
|
||||
|
||||
include ${TOPDIR}/.config
|
||||
|
||||
# Setup for the selected toolchain
|
||||
# NuttX buildroot under Linux or Cygwin
|
||||
|
||||
CROSSDEV = m9s12x-elf-
|
||||
MAXOPTIMIZATION = -Os
|
||||
WINTOOL = n
|
||||
|
||||
ifeq ($(CONFIG_HCS12_NONBANKED),y)
|
||||
ARCHCPUFLAGS = -m9s12x -mshort -mnolong-calls
|
||||
LDSCRIPT = ld.script.nonbanked
|
||||
else
|
||||
ARCHCPUFLAGS = -m9s12x -mshort -mlong-calls
|
||||
LDSCRIPT = ld.script.banked
|
||||
endif
|
||||
|
||||
ifneq ($(CONFIG_HCS12_MSOFTREGS),0)
|
||||
ARCHCPUFLAGS += -msoft-reg-count=$(CONFIG_HCS12_MSOFTREGS)
|
||||
endif
|
||||
|
||||
ifeq ($(WINTOOL),y)
|
||||
# Windows-native toolchains
|
||||
DIRLINK = $(TOPDIR)/tools/winlink.sh
|
||||
DIRUNLINK = $(TOPDIR)/tools/unlink.sh
|
||||
MKDEP = $(TOPDIR)/tools/mknulldeps.sh
|
||||
ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
|
||||
ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
|
||||
ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/ostest/$(LDSCRIPT)}"
|
||||
MAXOPTIMIZATION = -O2
|
||||
else
|
||||
# Linux/Cygwin-native toolchain
|
||||
MKDEP = $(TOPDIR)/tools/mkdeps.sh
|
||||
ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
|
||||
ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
|
||||
ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/ostest/$(LDSCRIPT)
|
||||
endif
|
||||
|
||||
CC = $(CROSSDEV)gcc
|
||||
CXX = $(CROSSDEV)g++
|
||||
CPP = $(CROSSDEV)gcc -E
|
||||
LD = $(CROSSDEV)ld
|
||||
AR = $(CROSSDEV)ar rcs
|
||||
NM = $(CROSSDEV)nm
|
||||
OBJCOPY = $(CROSSDEV)objcopy
|
||||
OBJDUMP = $(CROSSDEV)objdump
|
||||
|
||||
ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'}
|
||||
ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1}
|
||||
|
||||
ifeq ("${CONFIG_DEBUG_SYMBOLS}","y")
|
||||
ARCHOPTIMIZATION = -g
|
||||
else
|
||||
ARCHOPTIMIZATION = $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer
|
||||
endif
|
||||
|
||||
ARCHCFLAGS = -fno-builtin
|
||||
ARCHCXXFLAGS = -fno-builtin -fno-exceptions
|
||||
ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow
|
||||
ARCHWARNINGSXX = -Wall -Wshadow
|
||||
ARCHDEFINES =
|
||||
ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10
|
||||
|
||||
CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) -pipe
|
||||
CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
|
||||
CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) -pipe
|
||||
CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
|
||||
CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES)
|
||||
AFLAGS = $(CFLAGS) -D__ASSEMBLY__
|
||||
|
||||
NXFLATLDFLAGS1 = -r -d -warn-common
|
||||
NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat.ld -no-check-sections
|
||||
LDNXFLATFLAGS = -e main -s 2048
|
||||
|
||||
OBJEXT = .o
|
||||
LIBEXT = .a
|
||||
EXEEXT =
|
||||
|
||||
LDFLAGS += -nostartfiles -nodefaultlibs
|
||||
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
|
||||
LDFLAGS += -g
|
||||
endif
|
||||
|
||||
define PREPROCESS
|
||||
@echo "CPP: $1->$2"
|
||||
@$(CPP) $(CPPFLAGS) $1 -o $2
|
||||
endef
|
||||
|
||||
define COMPILE
|
||||
@echo "CC: $1"
|
||||
@$(CC) -c $(CFLAGS) $1 -o $2
|
||||
endef
|
||||
|
||||
define COMPILEXX
|
||||
@echo "CXX: $1"
|
||||
@$(CXX) -c $(CXXFLAGS) $1 -o $2
|
||||
endef
|
||||
|
||||
define ASSEMBLE
|
||||
@echo "AS: $1"
|
||||
@$(CC) -c $(AFLAGS) $1 -o $2
|
||||
endef
|
||||
|
||||
define ARCHIVE
|
||||
echo "AR: $2"; \
|
||||
$(AR) $1 $2 || { echo "$(AR) $1 $2 FAILED!" ; exit 1 ; }
|
||||
endef
|
||||
|
||||
define CLEAN
|
||||
@rm -f *.o *.a
|
||||
endef
|
||||
|
||||
HOSTCC = gcc
|
||||
HOSTINCLUDES = -I.
|
||||
HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe
|
||||
HOSTLDFLAGS =
|
||||
|
||||
Executable
+763
File diff suppressed because it is too large
Load Diff
Executable
+143
@@ -0,0 +1,143 @@
|
||||
/****************************************************************************
|
||||
* configs/ne64badge/ostest/ld.script
|
||||
*
|
||||
* Copyright (C) 2011 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
/* The NE64 Badge has 64Kb of FLASH and 8Kb of SRAM that are assumed to be
|
||||
* paged and positioned as below:
|
||||
*/
|
||||
|
||||
MEMORY
|
||||
{
|
||||
/* The 8Kb SRAM is mapped to 0x2000-0x2fff. The top 256 bytes are reserved
|
||||
* for the serial monitor stack space.
|
||||
*/
|
||||
|
||||
sram (rwx) : ORIGIN = 0x2000, LENGTH = 8K-256
|
||||
|
||||
/* Two fixed text flash pages (corresponding to page 3e and 3f) */
|
||||
|
||||
lowtext(rx) : ORIGIN = 0x4000, LENGTH = 16K /* Page 3e */
|
||||
hitext (rx) : ORIGIN = 0xc000, LENGTH = 16K-2k /* Page 3f */
|
||||
|
||||
/* Flash memory pages:
|
||||
*
|
||||
* The MC9S12NE64 implements 6 bits of the PPAGE register which gives it a
|
||||
* 1 Mbyte program memory address space that is accessed through the PPAGE
|
||||
* window. The lower 768K portion (0x000000-0x0bffff) of the address space
|
||||
* is accessed with PPAGE values 0x00 through 0x2f. This address range
|
||||
* is reserved for external memory when the part is operated in expanded
|
||||
* mode. The upper 256K of the address space (0x0c0000-0x100000), accessed
|
||||
* with PPAGE values 0x30 through 0x3f, is occupied by on chip flash.
|
||||
*/
|
||||
|
||||
page30 (rx) : ORIGIN = 0x0c0000, LENGTH = 16K /* Page 30 */
|
||||
page31 (rx) : ORIGIN = 0x0c4000, LENGTH = 16K /* Page 31 */
|
||||
page32 (rx) : ORIGIN = 0x0c8000, LENGTH = 16K /* Page 32 */
|
||||
page33 (rx) : ORIGIN = 0x0cc000, LENGTH = 16K /* Page 33 */
|
||||
page34 (rx) : ORIGIN = 0x0d0000, LENGTH = 16K /* Page 34 */
|
||||
page35 (rx) : ORIGIN = 0x0d4000, LENGTH = 16K /* Page 35 */
|
||||
page36 (rx) : ORIGIN = 0x0d8000, LENGTH = 16K /* Page 36 */
|
||||
page37 (rx) : ORIGIN = 0x0dc000, LENGTH = 16K /* Page 37 */
|
||||
page38 (rx) : ORIGIN = 0x0e0000, LENGTH = 16K /* Page 38 */
|
||||
page39 (rx) : ORIGIN = 0x0e4000, LENGTH = 16K /* Page 39 */
|
||||
page3a (rx) : ORIGIN = 0x0e8000, LENGTH = 16K /* Page 3a */
|
||||
page3b (rx) : ORIGIN = 0x0ec000, LENGTH = 16K /* Page 3b */
|
||||
page3c (rx) : ORIGIN = 0x0f0000, LENGTH = 16K /* Page 3c */
|
||||
page3d (rx) : ORIGIN = 0x0f4000, LENGTH = 16K /* Page 3d */
|
||||
|
||||
page3e (rx) : ORIGIN = 0x0f8000, LENGTH = 16K /* Page 3e */
|
||||
page3f (rx) : ORIGIN = 0x0fc000, LENGTH = 16K-2K /* Page 3f */
|
||||
|
||||
/* Vectors. These get relocated to 0xf780-f7ff by the serial loader */
|
||||
|
||||
vectors (rx) : ORIGIN = 0xff80, LENGTH = 256
|
||||
}
|
||||
|
||||
ENTRY(_stext)
|
||||
SECTIONS
|
||||
{
|
||||
.text : {
|
||||
_stext = ABSOLUTE(.);
|
||||
*(.vectors)
|
||||
*(.text .text.*)
|
||||
*(.fixup)
|
||||
*(.gnu.warning)
|
||||
*(.rodata .rodata.*)
|
||||
*(.gnu.linkonce.t.*)
|
||||
*(.glue_7)
|
||||
*(.glue_7t)
|
||||
*(.got)
|
||||
*(.gcc_except_table)
|
||||
*(.gnu.linkonce.r.*)
|
||||
_etext = ABSOLUTE(.);
|
||||
} > hitext
|
||||
|
||||
_eronly = ABSOLUTE(.); /* See below */
|
||||
|
||||
.data : {
|
||||
_sdata = ABSOLUTE(.);
|
||||
*(.data .data.*)
|
||||
*(.gnu.linkonce.d.*)
|
||||
CONSTRUCTORS
|
||||
_edata = ABSOLUTE(.);
|
||||
} > sram AT > lowtext
|
||||
|
||||
.bss : { /* BSS */
|
||||
_sbss = ABSOLUTE(.);
|
||||
*(.bss .bss.*)
|
||||
*(.gnu.linkonce.b.*)
|
||||
*(COMMON)
|
||||
_ebss = ABSOLUTE(.);
|
||||
} > sram
|
||||
|
||||
.vectors : {
|
||||
_svectors = ABSOLUTE(.);
|
||||
*(.vectors)
|
||||
_evectors = ABSOLUTE(.);
|
||||
} > vectors
|
||||
|
||||
/* Stabs debugging sections. */
|
||||
.stab 0 : { *(.stab) }
|
||||
.stabstr 0 : { *(.stabstr) }
|
||||
.stab.excl 0 : { *(.stab.excl) }
|
||||
.stab.exclstr 0 : { *(.stab.exclstr) }
|
||||
.stab.index 0 : { *(.stab.index) }
|
||||
.stab.indexstr 0 : { *(.stab.indexstr) }
|
||||
.comment 0 : { *(.comment) }
|
||||
.debug_abbrev 0 : { *(.debug_abbrev) }
|
||||
.debug_info 0 : { *(.debug_info) }
|
||||
.debug_line 0 : { *(.debug_line) }
|
||||
.debug_pubnames 0 : { *(.debug_pubnames) }
|
||||
.debug_aranges 0 : { *(.debug_aranges) }
|
||||
}
|
||||
Executable
+116
@@ -0,0 +1,116 @@
|
||||
/****************************************************************************
|
||||
* configs/ne64badge/ostest/ld.script
|
||||
*
|
||||
* Copyright (C) 2011 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
/* The NE64 Badge has 64Kb of FLASH and 8Kb of SRAM that are assumed to be
|
||||
* paged and positioned as below:
|
||||
*/
|
||||
|
||||
MEMORY
|
||||
{
|
||||
/* The 8Kb SRAM is mapped to 0x2000-0x2fff. The top 256 bytes are reserved
|
||||
* for the serial monitor stack space.
|
||||
*/
|
||||
|
||||
sram (rwx) : ORIGIN = 0x2000, LENGTH = 8K-256
|
||||
|
||||
/* Three fixed text flash pages (corresponding to page 3e, 3d, and 3f) at
|
||||
* 16Kb each (minus 2Kb at the end of page 3f that is reserved at the top for
|
||||
* the serial boot loader
|
||||
*/
|
||||
|
||||
text (rx) : ORIGIN = 0x4000, LENGTH = 48K-2k /* Page 3e, 3d, and 3f */
|
||||
|
||||
/* Vectors. These get relocated to 0xf780-f7ff by the serial loader */
|
||||
|
||||
vectors (rx) : ORIGIN = 0xff80, LENGTH = 256
|
||||
}
|
||||
|
||||
ENTRY(_stext)
|
||||
SECTIONS
|
||||
{
|
||||
.text : {
|
||||
_stext = ABSOLUTE(.);
|
||||
*(.vectors)
|
||||
*(.text .text.*)
|
||||
*(.fixup)
|
||||
*(.gnu.warning)
|
||||
*(.rodata .rodata.*)
|
||||
*(.gnu.linkonce.t.*)
|
||||
*(.glue_7)
|
||||
*(.glue_7t)
|
||||
*(.got)
|
||||
*(.gcc_except_table)
|
||||
*(.gnu.linkonce.r.*)
|
||||
_etext = ABSOLUTE(.);
|
||||
} > text
|
||||
|
||||
_eronly = ABSOLUTE(.); /* See below */
|
||||
|
||||
.data : {
|
||||
_sdata = ABSOLUTE(.);
|
||||
*(.data .data.*)
|
||||
*(.gnu.linkonce.d.*)
|
||||
CONSTRUCTORS
|
||||
_edata = ABSOLUTE(.);
|
||||
} > sram AT > text
|
||||
|
||||
.bss : { /* BSS */
|
||||
_sbss = ABSOLUTE(.);
|
||||
*(.bss .bss.*)
|
||||
*(.gnu.linkonce.b.*)
|
||||
*(COMMON)
|
||||
_ebss = ABSOLUTE(.);
|
||||
} > sram
|
||||
|
||||
.vectors : {
|
||||
_svectors = ABSOLUTE(.);
|
||||
*(.vectors)
|
||||
_evectors = ABSOLUTE(.);
|
||||
} > vectors
|
||||
|
||||
/* Stabs debugging sections. */
|
||||
.stab 0 : { *(.stab) }
|
||||
.stabstr 0 : { *(.stabstr) }
|
||||
.stab.excl 0 : { *(.stab.excl) }
|
||||
.stab.exclstr 0 : { *(.stab.exclstr) }
|
||||
.stab.index 0 : { *(.stab.index) }
|
||||
.stab.indexstr 0 : { *(.stab.indexstr) }
|
||||
.comment 0 : { *(.comment) }
|
||||
.debug_abbrev 0 : { *(.debug_abbrev) }
|
||||
.debug_info 0 : { *(.debug_info) }
|
||||
.debug_line 0 : { *(.debug_line) }
|
||||
.debug_pubnames 0 : { *(.debug_pubnames) }
|
||||
.debug_aranges 0 : { *(.debug_aranges) }
|
||||
}
|
||||
Executable
+46
@@ -0,0 +1,46 @@
|
||||
#!/bin/bash
|
||||
# configs/ne64badge/ostest/setenv.sh
|
||||
#
|
||||
# Copyright (C) 2011 Gregory Nutt. All rights reserved.
|
||||
# Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions
|
||||
# are met:
|
||||
#
|
||||
# 1. Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# 2. Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in
|
||||
# the documentation and/or other materials provided with the
|
||||
# distribution.
|
||||
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||
# used to endorse or promote products derived from this software
|
||||
# without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
# POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
|
||||
if [ "$(basename $0)" = "setenv.sh" ] ; then
|
||||
echo "You must source this script, not run it!" 1>&2
|
||||
exit 1
|
||||
fi
|
||||
|
||||
if [ -z "${PATH_ORIG}" ]; then export PATH_ORIG="${PATH}"; fi
|
||||
|
||||
WD=`pwd`
|
||||
export BUILDROOT_BIN="${WD}/../buildroot/build_m9s12x/staging_dir/bin"
|
||||
export PATH="${BUILDROOT_BIN}:${RIDE_BIN}:/sbin:/usr/sbin:${PATH_ORIG}"
|
||||
|
||||
echo "PATH : ${PATH}"
|
||||
Executable
+87
@@ -0,0 +1,87 @@
|
||||
############################################################################
|
||||
# configs/ne64badge/src/Makefile
|
||||
#
|
||||
# Copyright (C) 2011 Gregory Nutt. All rights reserved.
|
||||
# Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions
|
||||
# are met:
|
||||
#
|
||||
# 1. Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# 2. Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in
|
||||
# the documentation and/or other materials provided with the
|
||||
# distribution.
|
||||
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||
# used to endorse or promote products derived from this software
|
||||
# without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
# POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
############################################################################
|
||||
|
||||
-include $(TOPDIR)/Make.defs
|
||||
|
||||
CFLAGS += -I$(TOPDIR)/sched
|
||||
|
||||
ASRCS =
|
||||
AOBJS = $(ASRCS:.S=$(OBJEXT))
|
||||
|
||||
CSRCS = up_boot.c up_leds.c up_buttons.c up_spi.c
|
||||
ifeq ($(CONFIG_EXAMPLES_NSH_ARCHINIT),y)
|
||||
CSRCS += up_nsh.c
|
||||
endif
|
||||
COBJS = $(CSRCS:.c=$(OBJEXT))
|
||||
|
||||
SRCS = $(ASRCS) $(CSRCS)
|
||||
OBJS = $(AOBJS) $(COBJS)
|
||||
|
||||
ARCH_SRCDIR = $(TOPDIR)/arch/$(CONFIG_ARCH)/src
|
||||
ifeq ($(WINTOOL),y)
|
||||
CFLAGS += -I "${shell cygpath -w $(ARCH_SRCDIR)/chip}" \
|
||||
-I "${shell cygpath -w $(ARCH_SRCDIR)/common}" \
|
||||
-I "${shell cygpath -w $(ARCH_SRCDIR)/cortexm3}"
|
||||
else
|
||||
CFLAGS += -I$(ARCH_SRCDIR)/chip -I$(ARCH_SRCDIR)/common -I$(ARCH_SRCDIR)/cortexm3
|
||||
endif
|
||||
|
||||
all: libboard$(LIBEXT)
|
||||
|
||||
$(AOBJS): %$(OBJEXT): %.S
|
||||
$(call ASSEMBLE, $<, $@)
|
||||
|
||||
$(COBJS) $(LINKOBJS): %$(OBJEXT): %.c
|
||||
$(call COMPILE, $<, $@)
|
||||
|
||||
libboard$(LIBEXT): $(OBJS)
|
||||
@( for obj in $(OBJS) ; do \
|
||||
$(call ARCHIVE, $@, $${obj}); \
|
||||
done ; )
|
||||
|
||||
.depend: Makefile $(SRCS)
|
||||
@$(MKDEP) $(CC) -- $(CFLAGS) -- $(SRCS) >Make.dep
|
||||
@touch $@
|
||||
|
||||
depend: .depend
|
||||
|
||||
clean:
|
||||
@rm -f libboard$(LIBEXT) *~ .*.swp
|
||||
$(call CLEAN)
|
||||
|
||||
distclean: clean
|
||||
@rm -f Make.dep .depend
|
||||
|
||||
-include Make.dep
|
||||
Executable
+188
@@ -0,0 +1,188 @@
|
||||
/************************************************************************************
|
||||
* configs/ne64badge/src/ne64badge_internal.h
|
||||
* arch/arm/src/board/ne64badge_internal.n
|
||||
*
|
||||
* Copyright (C) 2011 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
#ifndef __CONFIGS_NE64BADGE_SRC_NE64BADGE_INTERNAL_H
|
||||
#define __CONFIGS_NE64BADGE_SRC_NE64BADGE_INTERNAL_H
|
||||
|
||||
/************************************************************************************
|
||||
* Included Files
|
||||
************************************************************************************/
|
||||
|
||||
#include <nuttx/config.h>
|
||||
#include <nuttx/compiler.h>
|
||||
|
||||
/************************************************************************************
|
||||
* Definitions
|
||||
************************************************************************************/
|
||||
|
||||
/* NE64BADGE Pin Usage **************************************************************/
|
||||
/* PIN PIN NAME BOARD SIGNAL NOTES
|
||||
* --- ------------------- -------------- ----------------------
|
||||
* 44 RESET J3 RESET_L Also to SW3
|
||||
* 57 BKGD/MODC/TAGHI_B BDM BKGD CON6A
|
||||
*
|
||||
* 86 PAD1 J3 ANALOG_IN0 Not used on board
|
||||
* 87 PAD2 J3 ANALOG_IN1 " " " " "" " "
|
||||
* 88 PAD3 J3 ANALOG_IN2 " " " " "" " "
|
||||
* 89 PAD4 J3 ANALOG_IN3 " " " " "" " "
|
||||
*
|
||||
* 70 PHY_TXP J7 TD+ RJ45 connector
|
||||
* 71 PHY_TXN J7 TD- RJ45 connector
|
||||
* 73 PHY_RXP J7 RD+ RJ45 connector
|
||||
* 74 PHY_RXN J7 RD- RJ45 connector
|
||||
*
|
||||
* 51 PL6/TXER/KWL6 N/C N/C
|
||||
* 52 PL5/TXDV/KWL5 N/C N/C
|
||||
* 58 PL4/COLLED Collision LED red
|
||||
* 59 PL3/DUPLED Full Duplex LED yellow
|
||||
* 81 PL2/SPDLED 100Mbps Speed LED yellow
|
||||
* 83 PL1/LNKLED Link Good LED green
|
||||
* 84 PL0/ACTLED Activity LED yellow
|
||||
*
|
||||
* 60 PA0/ADDR8/DATA8 J3 ADDR_DATA8 Not used on board
|
||||
* 61 PA1/ADDR9/DATA9 J3 ADDR_DATA9 " " " " "" " "
|
||||
* 62 PA2/ADDR10/DATA10 J3 ADDR_DATA10 " " " " "" " "
|
||||
* 63 PA3/ADDR11/DATA11 J3 ADDR_DATA11 " " " " "" " "
|
||||
* 77 PA4/ADDR12/DATA12 J3 ADDR_DATA12 " " " " "" " "
|
||||
* 78 PA5/ADDR13/DATA13 J3 ADDR_DATA13 " " " " "" " "
|
||||
* 79 PA6/ADDR14/DATA14 J3 ADDR_DATA14 " " " " "" " "
|
||||
* 80 PA7/ADDR15/DATA15 J3 ADDR_DATA15 " " " " "" " "
|
||||
*
|
||||
* 10 PB0/ADDR0/DATA0 J3 ADDR_DATA0 Not used on board
|
||||
* 11 PB1/ADDR1/DATA1 J3 ADDR_DATA1 " " " " "" " "
|
||||
* 12 PB2/ADDR2/DATA2 J3 ADDR_DATA2 " " " " "" " "
|
||||
* 13 PB3/ADDR3/DATA3 J3 ADDR_DATA3 " " " " "" " "
|
||||
* 16 PB4/ADDR4/DATA4 J3 ADDR_DATA4 " " " " "" " "
|
||||
* 17 PB5/ADDR5/DATA5 J3 ADDR_DATA5 " " " " "" " "
|
||||
* 18 PB6/ADDR6/DATA6 J3 ADDR_DATA6 " " " " "" " "
|
||||
* 19 PB7/ADDR7/DATA7 J3 ADDR_DATA7 " " " " "" " "
|
||||
*
|
||||
* 97 PK0/XADR14 N/C N/C
|
||||
* 98 PK1/XADR15 N/C N/C
|
||||
* 99 PK2/XADR16 N/C N/C
|
||||
* 100 PK3/XADR17 N/C N/C
|
||||
* 103 PK4/XADR18 N/C N/C
|
||||
* 104 PK5/XADR19 N/C N/C
|
||||
* 105 PK6/XCS_B J3 XCS Not used on board
|
||||
* 106 PK7/ECS_B/ROMCTL J3 ECS " " " " "" " "
|
||||
*
|
||||
* 56 PE0/XIRQ_B BUTTON1 SW1
|
||||
* 55 PE1/IRQ_B J3 IRQ Not used on board
|
||||
* 54 PE2/R_W J3 RW " " " " "" " "
|
||||
* 53 PE3/LSTRB_B/TAGLO_B J3 LSTRB " " " " "" " "
|
||||
* 41 PE4/ECLK J3 ECLK " " " " "" " "
|
||||
* 40 PE5/IPIPE0/MODA J3 MODA " " " " "" " "
|
||||
* 39 PE6/IPIPE1/MODB J3 MODB " " " " "" " "
|
||||
* 38 PE7/NOACC/XCLKS_B pulled low pulled low
|
||||
*
|
||||
* 110 PT4/IOC1_4 J3 GPIO8 Not used on board
|
||||
* 109 PT5/IOC1_5 J3 GPIO9 " " " " "" " "
|
||||
* 108 PT6/IOC1_6 J3 GPIO10 " " " " "" " "
|
||||
* 107 PT7/IOC1_7 N/C N/C
|
||||
*
|
||||
* 22 PG0/RXD0/KWG0 J3 GPIO0 Not used on board
|
||||
* 23 PG1/RXD1/KWG1 J3 GPIO1 " " " " "" " "
|
||||
* 24 PG2/RXD2/KWG2 J3 GPIO2 " " " " "" " "
|
||||
* 25 PG3/RXD3/KWG3 J3 GPIO3 " " " " "" " "
|
||||
* 26 PG4/RXCLK/KWG4 J3 GPIO4 " " " " "" " "
|
||||
* 27 PG5/RXDV/KWG5 J3 GPIO5 " " " " "" " "
|
||||
* 28 PG6/RXER/KWG6 J3 GPIO6 " " " " "" " "
|
||||
* 29 PG7/KWG7 J3 GPIO7 " " " " "" " "
|
||||
*
|
||||
* 8 PJ0/MDC/KWJ0 LED1 D21, red
|
||||
* 9 PJ1/MDIO/KWJ1 LED2 D22, red
|
||||
* 20 PJ2/CRS/KWJ2 J3 SPI_CS Not used on board
|
||||
* 21 PJ3/COL/KWJ3 N/C
|
||||
* 112 PJ6/SDA/KWJ6 J3 I2C_DATA Not used on board
|
||||
* 111 PJ7/SCL/KWJ7 J3 I2C_CLOCK " " " " "" " "
|
||||
*
|
||||
* 30 PS0/RXD0 RS232_RX Eventually maps to J2 RXD
|
||||
* 31 PS1/TXD0 RS232_TX Eventually maps to J2 TXD
|
||||
* 32 PS2/RXD1 J3&J4 UART_RX Not used on board
|
||||
* 33 PS3/TXD1 J3&J4 UART_TX " " " " "" " "
|
||||
* 34 PS4/MISO J3 SPI_MISO " " " " "" " "
|
||||
* 35 PS5/MOSI J3 SPI_MOSI " " " " "" " "
|
||||
* 36 PS6/SCK J3 SPI_CLOCK " " " " "" " "
|
||||
* 37 PS7/SS_B J3 SPI_SS " " " " "" " "
|
||||
*
|
||||
* 7 PH0/TXD0/KWH0 N/C N/C
|
||||
* 6 PH1/TXD1/KWH1 N/C N/C
|
||||
* 5 PH2/TXD2/KWH2 J4 XBEE_RESET Not used on board
|
||||
* 4 PH3/TXD3/KWH3 J4 XBEE_RSSI Not used on board
|
||||
* 3 PH4/TXCLK/KWH4 BUTTON2 SW2
|
||||
* 2 PH5/TXDV/KWH5 J5 XBEE_LOAD_H Not used on board
|
||||
* 1 PH6/TXER/KWH6 J4 XBEE_LOAD_L Not used on board
|
||||
*/
|
||||
|
||||
/************************************************************************************
|
||||
* Public Types
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Public data
|
||||
************************************************************************************/
|
||||
|
||||
#ifndef __ASSEMBLY__
|
||||
|
||||
/************************************************************************************
|
||||
* Public Functions
|
||||
************************************************************************************/
|
||||
/************************************************************************************
|
||||
* Name: up_ledinit
|
||||
*
|
||||
* Description:
|
||||
* Configure and initialize on-board LEDs
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
#ifdef CONFIG_ARCH_LEDS
|
||||
extern void up_ledinit(void);
|
||||
#endif
|
||||
|
||||
/************************************************************************************
|
||||
* Name: hcs12_spiinitialize
|
||||
*
|
||||
* Description:
|
||||
* Called to configure SPI chip select GPIO pins for the STM3210E-EVAL board.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
extern void weak_function hcs12_spiinitialize(void);
|
||||
|
||||
|
||||
#endif /* __ASSEMBLY__ */
|
||||
#endif /* __CONFIGS_NE64BADGE_SRC_NE64BADGE_INTERNAL_H */
|
||||
|
||||
Executable
+89
@@ -0,0 +1,89 @@
|
||||
/************************************************************************************
|
||||
* configs/ne64badge/src/up_boot.c
|
||||
* arch/arm/src/board/up_boot.c
|
||||
*
|
||||
* Copyright (C) 2011 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Included Files
|
||||
************************************************************************************/
|
||||
|
||||
#include <nuttx/config.h>
|
||||
|
||||
#include <debug.h>
|
||||
|
||||
#include <arch/board/board.h>
|
||||
|
||||
#include "ne64badge_internal.h"
|
||||
|
||||
/************************************************************************************
|
||||
* Definitions
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Private Functions
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Public Functions
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Name: hcs12_boardinitialize
|
||||
*
|
||||
* Description:
|
||||
* All HCS12 architectures must provide the following entry point. This entry point
|
||||
* is called early in the intitialization -- after all memory has been configured
|
||||
* and mapped but before any devices have been initialized.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
void hcs12_boardinitialize(void)
|
||||
{
|
||||
/* Configure SPI chip selects if 1) SPI is not disabled, and 2) the weak function
|
||||
* hcs12_spiinitialize() has been brought into the link.
|
||||
*/
|
||||
|
||||
#if defined(CONFIG_INCLUDE_HCS12_ARCH_SPI)
|
||||
if (hcs12_spiinitialize)
|
||||
{
|
||||
hcs12_spiinitialize();
|
||||
}
|
||||
#endif
|
||||
|
||||
/* Configure on-board LEDs if LED support has been selected. */
|
||||
|
||||
#ifdef CONFIG_ARCH_LEDS
|
||||
up_ledinit();
|
||||
#endif
|
||||
}
|
||||
Executable
+82
@@ -0,0 +1,82 @@
|
||||
/****************************************************************************
|
||||
* configs/ne64badge/src/up_leds.c
|
||||
*
|
||||
* Copyright (C) 2011 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Included Files
|
||||
****************************************************************************/
|
||||
|
||||
#include <nuttx/config.h>
|
||||
|
||||
#include <stdint.h>
|
||||
|
||||
#include <arch/board/board.h>
|
||||
#include "ne64badge_internal.h"
|
||||
|
||||
#ifdef CONFIG_ARCH_BUTTONS
|
||||
|
||||
/****************************************************************************
|
||||
* Definitions
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Private Data
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Private Functions
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Public Functions
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Name: up_buttoninit
|
||||
****************************************************************************/
|
||||
|
||||
void up_buttoninit(void)
|
||||
{
|
||||
}
|
||||
|
||||
/****************************************************************************
|
||||
* Name: up_buttons
|
||||
****************************************************************************/
|
||||
|
||||
uint8_t up_buttons(void)
|
||||
{
|
||||
return 0;
|
||||
}
|
||||
|
||||
#endif /* CONFIG_ARCH_BUTTONS */
|
||||
Executable
+108
@@ -0,0 +1,108 @@
|
||||
/****************************************************************************
|
||||
* configs/ne64badge/src/up_leds.c
|
||||
* arch/arm/src/board/up_leds.c
|
||||
*
|
||||
* Copyright (C) 2011 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Included Files
|
||||
****************************************************************************/
|
||||
|
||||
#include <nuttx/config.h>
|
||||
|
||||
#include <debug.h>
|
||||
|
||||
#include <arch/board/board.h>
|
||||
|
||||
#include "ne64badge_internal.h"
|
||||
|
||||
/****************************************************************************
|
||||
* Pre-processor Definitions
|
||||
****************************************************************************/
|
||||
|
||||
/* Enables debug output from this file (needs CONFIG_DEBUG with
|
||||
* CONFIG_DEBUG_VERBOSE too)
|
||||
*/
|
||||
|
||||
#undef LED_DEBUG /* Define to enable debug */
|
||||
|
||||
#ifdef LED_DEBUG
|
||||
# define leddbg lldbg
|
||||
# define ledvdbg llvdbg
|
||||
#else
|
||||
# define leddbg(x...)
|
||||
# define ledvdbg(x...)
|
||||
#endif
|
||||
|
||||
/****************************************************************************
|
||||
* Private Data
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Private Functions
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Public Functions
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Name: up_ledinit
|
||||
*
|
||||
* Description:
|
||||
* Configure and initialize on-board LEDs
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
#ifdef CONFIG_ARCH_LEDS
|
||||
void up_ledinit(void)
|
||||
{
|
||||
}
|
||||
|
||||
/****************************************************************************
|
||||
* Name: up_ledon
|
||||
****************************************************************************/
|
||||
|
||||
void up_ledon(int led)
|
||||
{
|
||||
}
|
||||
|
||||
/****************************************************************************
|
||||
* Name: up_ledoff
|
||||
****************************************************************************/
|
||||
|
||||
void up_ledoff(int led)
|
||||
{
|
||||
}
|
||||
|
||||
#endif /* CONFIG_ARCH_LEDS */
|
||||
Executable
+86
@@ -0,0 +1,86 @@
|
||||
/****************************************************************************
|
||||
* config/ne64badge/src/up_nsh.c
|
||||
* arch/arm/src/board/up_nsh.c
|
||||
*
|
||||
* Copyright (C) 2011 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Included Files
|
||||
****************************************************************************/
|
||||
|
||||
#include <nuttx/config.h>
|
||||
|
||||
#include <stdio.h>
|
||||
#include <debug.h>
|
||||
#include <errno.h>
|
||||
|
||||
#include "ne64badge_internal.h"
|
||||
|
||||
/****************************************************************************
|
||||
* Pre-Processor Definitions
|
||||
****************************************************************************/
|
||||
|
||||
/* Debug ********************************************************************/
|
||||
|
||||
#ifdef CONFIG_CPP_HAVE_VARARGS
|
||||
# ifdef CONFIG_DEBUG
|
||||
# define message(...) lib_lowprintf(__VA_ARGS__)
|
||||
# else
|
||||
# define message(...) printf(__VA_ARGS__)
|
||||
# endif
|
||||
#else
|
||||
# ifdef CONFIG_DEBUG
|
||||
# define message lib_lowprintf
|
||||
# else
|
||||
# define message printf
|
||||
# endif
|
||||
#endif
|
||||
|
||||
/****************************************************************************
|
||||
* Public Functions
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Name: nsh_archinitialize
|
||||
*
|
||||
* Description:
|
||||
* Perform architecture specific initialization
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
int nsh_archinitialize(void)
|
||||
{
|
||||
/* Configure SPI-based devices */
|
||||
|
||||
return OK;
|
||||
}
|
||||
Executable
+130
@@ -0,0 +1,130 @@
|
||||
/************************************************************************************
|
||||
* configs/ne64badge/src/up_spi.c
|
||||
* arch/arm/src/board/up_spi.c
|
||||
*
|
||||
* Copyright (C) 2011 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Included Files
|
||||
************************************************************************************/
|
||||
|
||||
#include <nuttx/config.h>
|
||||
|
||||
#include <stdint.h>
|
||||
#include <stdbool.h>
|
||||
#include <debug.h>
|
||||
|
||||
#include <nuttx/spi.h>
|
||||
#include <arch/board/board.h>
|
||||
|
||||
#include "ne64badge_internal.h"
|
||||
|
||||
#if defined(CONFIG_HCS12_SPI)
|
||||
|
||||
/************************************************************************************
|
||||
* Definitions
|
||||
************************************************************************************/
|
||||
|
||||
/* Enables debug output from this file (needs CONFIG_DEBUG too) */
|
||||
|
||||
#undef SPI_DEBUG /* Define to enable debug */
|
||||
#undef SPI_VERBOSE /* Define to enable verbose debug */
|
||||
|
||||
#ifdef SPI_DEBUG
|
||||
# define spidbg lldbg
|
||||
# ifdef SPI_VERBOSE
|
||||
# define spivdbg lldbg
|
||||
# else
|
||||
# define spivdbg(x...)
|
||||
# endif
|
||||
#else
|
||||
# undef SPI_VERBOSE
|
||||
# define spidbg(x...)
|
||||
# define spivdbg(x...)
|
||||
#endif
|
||||
|
||||
/************************************************************************************
|
||||
* Private Functions
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Public Functions
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Name: hcs12_spiinitialize
|
||||
*
|
||||
* Description:
|
||||
* Called to configure SPI chip select GPIO pins for the NE64 Badge board.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
void weak_function hcs12_spiinitialize(void)
|
||||
{
|
||||
}
|
||||
|
||||
/****************************************************************************
|
||||
* Name: hcs12_spiselect and hcs12_spistatus
|
||||
*
|
||||
* Description:
|
||||
* The external functions, hcs12_spiselect and hcs12_spistatus must be
|
||||
* provided by board-specific logic. They are implementations of the select
|
||||
* and status methods of the SPI interface defined by struct spi_ops_s (see
|
||||
* include/nuttx/spi.h). All other methods (including up_spiinitialize())
|
||||
* are provided by common HCS12 logic. To use this common SPI logic on your
|
||||
* board:
|
||||
*
|
||||
* 1. Provide logic in hcs12_boardinitialize() to configure SPI chip select
|
||||
* pins.
|
||||
* 2. Provide hcs12_spiselect() and hcs12_spistatus() functions in your
|
||||
* board-specific logic. These functions will perform chip selection and
|
||||
* status operations using GPIOs in the way your board is configured.
|
||||
* 3. Add a calls to up_spiinitialize() in your low level application
|
||||
* initialization logic
|
||||
* 4. The handle returned by up_spiinitialize() may then be used to bind the
|
||||
* SPI driver to higher level logic (e.g., calling
|
||||
* mmcsd_spislotinitialize(), for example, will bind the SPI driver to
|
||||
* the SPI MMC/SD driver).
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
void hcs12_spiselect(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected)
|
||||
{
|
||||
}
|
||||
|
||||
uint8_t hcs12_spistatus(FAR struct spi_dev_s *dev, enum spi_dev_e devid)
|
||||
{
|
||||
return SPI_STATUS_PRESENT;
|
||||
}
|
||||
|
||||
#endif /* CONFIG_HCS12_SPI */
|
||||
Reference in New Issue
Block a user