Add mapping for the page table

git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@2872 42af7a65-404d-4744-a932-0658087f49c3

arch/arm/src/arm/pg_macros.h

@@ -59,35 +59,85 @@
 #    error "Cannot support both CONFIG_PAGING and CONFIG_ARCH_ROMPGTABLE"
 #  endif
 
+  /* Page Size Selections ***************************************************/
+
   /* Create some friendly definitions to handle some differences between
    * small and tiny pages.
    */
 
 #  if CONFIG_PAGING_PAGESIZE == 1024
+
+     /* Number of pages in an L2 table per L1 entry */
+
 #    define PTE_NPAGES         PTE_TINY_NPAGES
+
+     /* L2 Page table address */
+
 #    define PG_L2_BASE_PADDR   PGTABLE_FINE_BASE_PADDR
 #    define PG_L2_BASE_VADDR   PGTABLE_FINE_BASE_VADDR
-#    define MMU_L1_TEXTFLAGS   (PMD_TYPE_FINE|PMD_BIT4|PTE_CACHEABLE)
+
+     /* MMU Flags for each memory region */
+
+#    define MMU_L1_TEXTFLAGS   (PMD_TYPE_FINE|PMD_BIT4)
 #    define MMU_L2_TEXTFLAGS   (PTE_TYPE_TINY|PTE_EXT_AP_UNO_SRO|PTE_CACHEABLE)
-#    define MMU_L1_DATAFLAGS   (PMD_TYPE_FINE|PMD_BIT4|PTE_CACHEABLE)
+#    define MMU_L1_DATAFLAGS   (PMD_TYPE_FINE|PMD_BIT4)
-#    define MMU_L2_DATAFLAGS   (PTE_TYPE_TINY|PTE_EXT_AP_UNO_SRW|PTE_CACHEABLE)
+#    define MMU_L2_DATAFLAGS   (PTE_TYPE_TINY|PTE_EXT_AP_UNO_SRW|PTE_CACHEABLE|PTE_BUFFERABLE)
+#    define MMU_L1_PGTABFLAGS  (PMD_TYPE_FINE|PMD_BIT4)
+#    define MMU_L2_PGTABFLAGS  (PTE_TYPE_TINY|PTE_EXT_AP_UNO_SRW)
+
 #  elif CONFIG_PAGING_PAGESIZE == 4096
-#    define PTE_NPAGES PTE_SMALL_NPAGES
+
+     /* Number of pages in an L2 table per L1 entry */
+
+#    define PTE_NPAGES         PTE_SMALL_NPAGES
+
+     /* L2 Page table address */
+
 #    define PG_L2_BASE_PADDR   PGTABLE_COARSE_BASE_PADDR
-#    define PG_L2_BASE_vADDR   PGTABLE_COARSE_BASE_VADDR
+#    define PG_L2_BASE_VADDR   PGTABLE_COARSE_BASE_VADDR
-#    define MMU_L1_TEXTFLAGS   (PMD_TYPE_COARSE|PMD_BIT4|PTE_CACHEABLE)
+
+     /* MMU Flags for each memory region. */
+
+#    define MMU_L1_TEXTFLAGS   (PMD_TYPE_COARSE|PMD_BIT4)
 #    define MMU_L2_TEXTFLAGS   (PTE_TYPE_SMALL|PTE_SMALL_AP_UNO_SRO|PTE_CACHEABLE)
-#    define MMU_L1_DATAFLAGS   (PMD_TYPE_COARSE|PMD_BIT4|PTE_CACHEABLE|PTE_BUFFERABLE)
+#    define MMU_L1_DATAFLAGS   (PMD_TYPE_COARSE|PMD_BIT4)
 #    define MMU_L2_DATAFLAGS   (PTE_TYPE_SMALL|PTE_SMALL_AP_UNO_SRW|PTE_CACHEABLE|PTE_BUFFERABLE)
+#    define MMU_L1_PGTABFLAGS  (PMD_TYPE_COARSE|PMD_BIT4)
+#    define MMU_L2_PGTABFLAGS  (PTE_TYPE_SMALL|PTE_SMALL_AP_UNO_SRW)
+
 #  else
 #    error "Need extended definitions for CONFIG_PAGING_PAGESIZE"
 #  endif
 
 #define PT_SIZE (PTE_NPAGES * 4)
 
-/* We position the data section PTE's just after the text section PTE's */
+/* We position the data section PTEs just after the text section PTE's */
 
 #define PG_L2_DATA_PADDR       (PG_L2_BASE_PADDR + 4*PG_TEXT_NPAGES)
+#define PG_L2_DATA_VADDR       (PG_L2_BASE_VADDR + 4*PG_TEXT_NPAGES)
+
+/* Page Table Info: The number of pages in the in the page table
+ * (PG_PGTABLE_NPAGES).  We position the pagetable PTEs just after
+ * the data section PTEs.
+ */
+
+#define PG_PGTABLE_NPAGES      (PGTABLE_SIZE >> PAGESHIFT)
+#define PG_L2_PGTABLE_PADDR    (PG_L2_DATA_PADDR + 4*PG_DATA_NPAGES)
+#define PG_L2_PGTABLE_VADDR    (PG_L2_DATA_VADDR + 4*PG_DATA_NPAGES)
+
+/* This is the total number of pages used in the initial page table setup
+ * in up_head.S
+ */
+
+#define PG_STATIC_NPAGES (PG_TEXT_NPAGES + PG_DATA_PAGES + PG_PGTABLE_NPAGES)
+
+/* For page managment purposes, the following summarize the "heap" of
+ * free pages
+ */
+
+#define PG_POOL_FIRSTPAGE  PG_STATIC_NPAGES
+#define PG_POOL_NPAGES     CONFIG_PAGING_NLOCKED
+
 #endif /* CONFIG_PAGING */
 
 /****************************************************************************
@@ -184,7 +234,7 @@
  *
  * Scratch registers (modified):
  *   addr, npages, tmp
- *   l2  - L2 page table physical address
+ *   l2 - L2 page table physical address
  *   addr - Physical address in the L1 page table.
  *   npages - The number of pages remaining to be accounted for
  *   tmp - scratch

arch/arm/src/arm/up_head.S

@@ -180,18 +180,41 @@ __start:
 	str	r3, [r4, r0, lsr #18]		/* identity mapping */
 
 #ifdef CONFIG_PAGING
-	/* Populate the L1 table for the locked and paged text regions */
+	/* Map the read-only .text region in place.  This must be done
+	 * before the MMU is enabled and the virtual addressing takes
+	 * effect.  First populate the L1 table for the locked and paged
+	 * text regions.
+	 *
+	 * We could probably make the the pg_span and pg_map macros into
+	 * call-able subroutines, but we would have to be carefully during
+	 * this phase while we are operating in a physical address space.
+	 */
 
 	adr	r0, .Ltxtspan
 	ldmia	r0, {r0, r1, r2, r3}
  	pg_span r0, r1, r2, r3, r4
 
-	/* Populate the L2 table for the locked text region only */
+	/* Then populate the L2 table for the locked text region only. */
 
 	adr	r0, .Ltxtmap
 	ldmia	r0, {r0, r1, r2, r3}
  	pg_map r0, r1, r2, r3, r4
- #else
+
+	/* Make sure that the page table is itself mapped and and read/write-able.
+	 * First, populate the L1 table:
+	 */
+
+	adr	r0, .Lptabspan
+	ldmia	r0, {r0, r1, r2, r3}
+ 	pg_span r0, r1, r2, r3, r4
+
+	/* Then populate the L2 table. */
+
+	adr	r0, .Lptabmap
+	ldmia	r0, {r0, r1, r2, r3}
+ 	pg_map r0, r1, r2, r3, r4
+
+#else
 	/* Create a virtual single section mapping for the first MB of the .text
 	 * address space. Now, we have the first 1MB mapping to both phyical and
 	 * virtual addresses.  The rest of the .text mapping will be completed in
@@ -303,7 +326,7 @@ __start:
  * PC_Relative Data
  ****************************************************************************/
 
-	/* These addresses are all virtual address */
+	/* Most addresses are all virtual address */
 	
 	.type	.LCvstart, %object
 .LCvstart:
@@ -312,17 +335,43 @@ __start:
 #ifndef CONFIG_ARCH_ROMPGTABLE
 	.type	.LCmmuflags, %object
 .LCmmuflags:
-	.long	MMU_MEMFLAGS
+	.long	MMU_MEMFLAGS			/* MMU flags for memory sections */
 #endif
 
-	.type	.LCppagetable, %object
+	.type	.LCppgtable, %object
 .LCppgtable:
-	.long	PGTABLE_BASE_PADDR		/* Physical start of DRAM */
+	.long	PGTABLE_BASE_PADDR		/* Physical start of page table */
 
 #ifndef CONFIG_ARCH_ROMPGTABLE
-	.type	.LCvpagetable, %object
+	.type	.LCvpgtable, %object
 .LCvpgtable:
-	.long	PGTABLE_BASE_VADDR		/* Virtual start of DRAM */
+	.long	PGTABLE_BASE_VADDR		/* Virtual start of page table */
+#endif
+
+#ifdef CONFIG_PAGING
+.Ltxtspan:
+	.long	PG_L2_BASE_PADDR		/* Physical address of L2 table */
+	.long	PG_LOCKED_VBASE			/* Virtual address of locked base */
+	.long	PG_TEXT_NPAGES			/* Total mapped text pages */
+	.long	MMU_L1_TEXTFLAGS		/* L1 MMU flags to use */
+
+.Ltxtmap:
+	.long	PG_L2_BASE_PADDR		/* Physical address of L2 table */
+	.long	PG_LOCKED_PBASE			/* Physical address of locked base */
+	.long	CONFIG_PAGING_NLOCKED		/* Number of pages in the locked region */
+	.long	MMU_L2_TEXTFLAGS		/* L2 MMU flags to use */
+
+.Lptabspan:
+	.long	PG_L2_PGTABLE_PADDR		/* Physical address of L2 table */
+	.long	PGTABLE_BASE_VADDR		/* Virtual address of the page table */
+	.long	PG_TEXT_NPAGES			/* Total mapped page table pages */
+	.long	MMU_L1_PGTABFLAGS		/* L1 MMU flags to use */
+
+.Lptabmap:
+	.long	PG_L2_PGTABLE_PADDR		/* Physical address of L2 table */
+	.long	PGTABLE_BASE_PADDR		/* Physical address of the page table */
+	.long	CONFIG_PAGING_NLOCKED		/* Total mapped page table pages */
+	.long	MMU_L2_PGTABFLAGS		/* L2 MMU flags to use */
 #endif
 	.size	_start, .-_start
 
@@ -353,15 +402,15 @@ __start:
 #if defined(CONFIG_PAGING)
 	/* Populate the L1 table for the data regions */
 
-	adr	r0, .Ldatamap
+	adr	r0, .Ldataspan
 	ldmia	r0, {r0, r1, r2, r3}
  	pg_span r0, r1, r2, r3, r4
 
 	/* Populate the L2 table for the data region */
 
 	adr	r0, .Ldatamap
-	ldmia	r0, {r0, r1, r2, r3, r4}
+	ldmia	r0, {r0, r1, r2, r3}
- 	pg_map r0, r1, r2, r4, r3
+ 	pg_map r0, r1, r2, r3, r4
 
 #elif defined(CONFIG_BOOT_RUNFROMFLASH)
 #  error "Logic not implemented"
@@ -424,7 +473,13 @@ __start:
 	 */
 
 #if defined(CONFIG_BOOT_RUNFROMFLASH) || defined(CONFIG_PAGING)
-# error "Logic not implemented"
+	adr	r3, .Ldatainit
+	ldmia	r3, {r0, r1, r2}
+
+1:	ldmia	r0!, {r3 - r10}
+	stmia	r1!, {r3 - r10}
+	cmp	r1, r2
+	blt	1b
 #endif
 
 	/* Perform early C-level, platform-specific initialization */
@@ -452,25 +507,25 @@ __start:
 	.long	_ebss+CONFIG_IDLETHREAD_STACKSIZE-4
 
 #ifdef CONFIG_PAGING
-.Ltxtspan:
+.Ldataspan:
-	.long	PG_L2_BASE_PADDR
+	.long	PG_L2_DATA_PADDR	/* Physical address of L2 table */
-	.long	PG_LOCKED_PBASE
+	.long	PG_DATA_PBASE		/* Physical address of data base */
-	.long	PG_TEXT_NPAGES
+	.long	PG_DATA_NPAGED		/* Number of pages in the data region */
-	.long	MMU_L1_TEXTFLAGS
+	.long	MMU_L1_DATAFLAGS	/* L1 MMU flags to use */
-
-.Ltxtmap:
-	.long	PG_L2_BASE_PADDR
-	.long	PG_LOCKED_PBASE
-	.long	CONFIG_PAGING_NLOCKED
-	.long	MMU_L2_TEXTFLAGS
 
 .Ldatamap:
-	.long	PG_L2_DATA_PADDR
+	.long	PG_L2_DATA_PADDR	/* Physical address of L2 table */
-	.long	PG_DATA_PBASE
+	.long	PG_DATA_VBASE		/* Virtual address of data base */
-	.long	PG_DATA_NPAGED
+	.long	PG_DATA_NPAGED		/* Number of pages in the data region */
-	.long	MMU_L1_DATAFLAGS
+	.long	MMU_L2_DATAFLAGS	/* L2 MMU flags to use */
-	.long	MMU_L2_DATAFLAGS
+#endif
- #endif
+
+#if defined(CONFIG_BOOT_RUNFROMFLASH) || defined(CONFIG_PAGING)
+.Ldatainit:
+	.long	_eronly			/* Where .data defaults are stored in FLASH */
+	.long	_sdata			/* Where .data needs to reside in SDRAM */
+	.long	_edata
+#endif
 	.size	.Lvstart, .-.Lvstart
 
 	 /* Data section variables */

arch/arm/src/arm/up_nommuhead.S

@@ -1,7 +1,7 @@
 /****************************************************************************
  * arch/arm/src/arm/up_nommuhead.S
  *
- *   Copyright (C) 2007, 2009 Gregory Nutt. All rights reserved.
+ *   Copyright (C) 2007, 2009-2010 Gregory Nutt. All rights reserved.
  *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
  *
  * Redistribution and use in source and binary forms, with or without

arch/arm/src/dm320/dm320_boot.c

@@ -1,7 +1,7 @@
 /************************************************************************************
  * arch/arm/src/dm320/dm320_boot.c
  *
- *   Copyright (C) 2007, 2009 Gregory Nutt. All rights reserved.
+ *   Copyright (C) 2007, 2009-2010 Gregory Nutt. All rights reserved.
  *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
  *
  * Redistribution and use in source and binary forms, with or without

arch/arm/src/lpc313x/lpc313x_boot.c

@@ -1,7 +1,7 @@
 /************************************************************************************
  * arch/arm/src/lpc313x/lpc313x_boot.c
  *
- *   Copyright (C) 2009 Gregory Nutt. All rights reserved.
+ *   Copyright (C) 2009-2010 Gregory Nutt. All rights reserved.
  *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
  *
  * Redistribution and use in source and binary forms, with or without
@@ -234,6 +234,10 @@ static void up_vectormapping(void)
 
 /************************************************************************************
  * Name: up_copyvectorblock
+ *
+ * Description:
+ *   Copy the interrupt block to its final destination.
+ *
  ************************************************************************************/
 
 static void up_copyvectorblock(void)
@@ -267,6 +271,14 @@ static void up_copyvectorblock(void)
  * Public Functions
  ************************************************************************************/
 
+/************************************************************************************
+ * Name: up_boot
+ *
+ * Description:
+ *   Complete boot operations started in up_head.S
+ *
+ ************************************************************************************/
+
 void up_boot(void)
 {
   /* __start provided the basic MMU mappings for SRAM.  Now provide mappings for all

include/nuttx/page.h

@@ -77,7 +77,8 @@
 #define PG_ALIGNUP(addr)           (((addr) + PAGEMASK) & ~PAGEMASK)
 
 /* CONFIG_PAGING_NLOCKED - This is the number of locked pages in the memory
- * map.  The size of locked address region will then be:
+ * map.  The size of locked address region will then be given by
+ * PG_LOCKED_SIZE.
  */
 
 #define PG_LOCKED_SIZE             (CONFIG_PAGING_NLOCKED << PAGESHIFT)
@@ -87,6 +88,12 @@
  * not defined, then this logic will be set to then to CONFIG_DRAM_START
  * and CONFIG_DRAM_VSTART (i.e., assuming that the base address of the
  * locked region is at the virtual address of the beginning of RAM).
+ *
+ * NOTE:  In some architectures, it may be necessary to take some memory
+ * from the beginning of this region for vectors or for a page table.
+ * In such cases, CONFIG_PAGING_LOCKED_P/VBASE should take that into
+ * consideration to prevent overlapping the locked memory region and the
+ * system data at the beginning of SRAM.
  */
 
 #if defined(CONFIG_PAGING_LOCKED_PBASE) && defined(CONFIG_PAGING_LOCKED_VBASE)
@@ -110,10 +117,19 @@
 
 #define PG_PAGED_SIZE              (CONFIG_PAGING_NPAGED << PAGESHIFT)
 
-/* This positions the paging Read-Only text section */
+/* This positions the paging Read-Only text section.  If the configuration
+ * did not override the default, the paged region will immediately follow
+ * the locked region.
+ */
+
+#if defined(CONFIG_PAGING_LOCKED_PBASE) && defined(CONFIG_PAGING_LOCKED_VBASE)
+#  define PG_LOCKED_PBASE          CONFIG_PAGING_LOCKED_PBASE
+#  define PG_LOCKED_VBASE          CONFIG_PAGING_LOCKED_VBASE
+#else
+#  define PG_PAGED_PBASE           PG_LOCKED_PEND
+#  define PG_PAGED_VBASE           PG_LOCKED_VEND
+#endif
 
-#define PG_PAGED_PBASE             PG_LOCKED_PEND
-#define PG_PAGED_VBASE             PG_LOCKED_VEND
 #define PG_PAGED_PEND              (PG_PAGED_PBASE + PG_PAGED_SIZE)
 #define PG_PAGED_VEND              (PG_PAGED_VBASE + PG_PAGED_SIZE)
 
@@ -123,23 +139,32 @@
 #define PG_TEXT_SIZE               (PG_TEXT_NPAGES << PAGESHIFT)
 
 /* CONFIG_PAGING_NDATA - This is the number of data pages in the memory
- * map.  The size of data address region will then be:
+ * map.  The data region will extend to the end of RAM unless overridden
+ * by a setting in the configuration file.
+ *
+ * NOTE:  In some architectures, it may be necessary to take some memory
+ * from the end of RAM for page tables or other system usage.  The
+ * configuration settings and linker directives must be cognizant of that.
+ * CONFIG_PAGING_NDATA should be defined to prevent the data region from
+ * extending all the way to the end of memory. 
  */
 
 #define PG_RAM_PAGES               (CONFIG_DRAM_SIZE >> PAGESHIFT)
-#if PG_RAM_PAGES <= PG_TEXT_NPAGES
+
+#ifdef CONFIG_PAGING_NDATA
+#  PG_DATA_NPAGES                  CONFIG_PAGING_NDATA
+#elif PG_RAM_PAGES > PG_TEXT_NPAGES
+#  PG_DATA_NPAGES                  (PG_RAM_PAGES - PG_TEXT_NPAGES)
+#else
 #  error "Not enough memory for this page layout"
 #endif
 
-#ifdef CONFIG_PAGING_NDATA
+#define PG_DATA_SIZE               (PG_DATA_NPAGES << PAGESHIFT)
-#  PG_DATA_NPAGED                  CONFIG_PAGING_NDATA
-#else
-#  PG_DATA_NPAGED                  (PG_RAM_PAGES - PG_TEXT_NPAGES)
-#endif
 
-#define PG_DATA_SIZE               (CONFIG_PAGING_NPAGED << PAGESHIFT)
+/* This positions the Read/Write data region.  If the configuration
-
+ * did not override the default, the paged region will immediately follow
-/* This positions the Read/Write data region */
+ * the paged region and will extend to the end of memory.
+ */
 
 #if defined(CONFIG_PAGING_DATA_PBASE) && defined(CONFIG_PAGING_DATA_VBASE)
 #  define PG_DATA_PBASE            CONFIG_PAGING_DATA_PBASE