mirror of
https://github.com/apache/nuttx.git
synced 2026-06-02 01:21:26 +08:00
Initial cut of a driver for the TI CC3000 network module with support on the Freescale KL25Z board from Alan Carvalho de Assis
This commit is contained in:
Gregory Nutt
@@ -8,6 +8,11 @@ config WL_CC1101
|
||||
default n
|
||||
select SPI
|
||||
|
||||
menuconfig WL_CC3000
|
||||
bool "CC3000 Wireless Module support"
|
||||
default n
|
||||
select SPI
|
||||
|
||||
config WL_NRF24L01
|
||||
bool "nRF24l01+ transceiver support"
|
||||
default n
|
||||
@@ -15,6 +20,7 @@ config WL_NRF24L01
|
||||
---help---
|
||||
This options adds driver support for the Nordic nRF24L01+ chip.
|
||||
|
||||
|
||||
if WL_NRF24L01
|
||||
|
||||
config WL_NRF24L01_DFLT_ADDR_WIDTH
|
||||
|
||||
@@ -0,0 +1,10 @@
|
||||
#
|
||||
# For a description of the syntax of this configuration file,
|
||||
# see misc/tools/kconfig-language.txt.
|
||||
#
|
||||
|
||||
config WL_CC3000_DUMMY
|
||||
bool "CC3000 Wireless Module Dummy Test"
|
||||
default n
|
||||
select SPI
|
||||
|
||||
@@ -0,0 +1,47 @@
|
||||
############################################################################
|
||||
# drivers/wireless/Make.defs
|
||||
#
|
||||
# Copyright (C) 2011-2012 Gregory Nutt. All rights reserved.
|
||||
# Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions
|
||||
# are met:
|
||||
#
|
||||
# 1. Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# 2. Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in
|
||||
# the documentation and/or other materials provided with the
|
||||
# distribution.
|
||||
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||
# used to endorse or promote products derived from this software
|
||||
# without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
# POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
############################################################################
|
||||
|
||||
ifeq ($(CONFIG_WL_CC3000),y)
|
||||
|
||||
# Include cc3000 drivers
|
||||
|
||||
CSRCS += cc3000_common.c evnt_handler.c hci.c netapp.c nvmem.c security.c socket.c spi.c wlan.c
|
||||
|
||||
# Include wireless devices build support
|
||||
|
||||
DEPPATH += --dep-path wireless$(DELIM)cc3000
|
||||
VPATH += :wireless$(DELIM)cc3000
|
||||
CFLAGS += ${shell $(INCDIR) $(INCDIROPT) "$(CC)" $(TOPDIR)$(DELIM)drivers$(DELIM)wireless$(DELIM)cc3000}
|
||||
endif
|
||||
@@ -0,0 +1,164 @@
|
||||
/*****************************************************************************
|
||||
*
|
||||
* cc3000_common.c.c - CC3000 Host Driver Implementation.
|
||||
* Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
*
|
||||
* Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
*
|
||||
* Neither the name of Texas Instruments Incorporated nor the names of
|
||||
* its contributors may be used to endorse or promote products derived
|
||||
* from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
|
||||
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
|
||||
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
|
||||
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
||||
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
||||
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
||||
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
*****************************************************************************/
|
||||
//*****************************************************************************
|
||||
//
|
||||
//! \addtogroup common_api
|
||||
//! @{
|
||||
//
|
||||
//*****************************************************************************
|
||||
/******************************************************************************
|
||||
*
|
||||
* Include files
|
||||
*
|
||||
*****************************************************************************/
|
||||
#include <nuttx/cc3000/cc3000_common.h>
|
||||
#include <nuttx/cc3000/socket.h>
|
||||
#include <nuttx/cc3000/wlan.h>
|
||||
#include <nuttx/cc3000/evnt_handler.h>
|
||||
|
||||
//*****************************************************************************
|
||||
//
|
||||
//! __error__
|
||||
//!
|
||||
//! @param pcFilename - file name, where error occurred
|
||||
//! @param ulLine - line number, where error occurred
|
||||
//!
|
||||
//! @return none
|
||||
//!
|
||||
//! @brief stub function for ASSERT macro
|
||||
//
|
||||
//*****************************************************************************
|
||||
void
|
||||
__error__(char *pcFilename, unsigned long ulLine)
|
||||
{
|
||||
//TODO full up function
|
||||
}
|
||||
|
||||
|
||||
|
||||
//*****************************************************************************
|
||||
//
|
||||
//! UINT32_TO_STREAM_f
|
||||
//!
|
||||
//! @param p pointer to the new stream
|
||||
//! @param u32 pointer to the 32 bit
|
||||
//!
|
||||
//! @return pointer to the new stream
|
||||
//!
|
||||
//! @brief This function is used for copying 32 bit to stream
|
||||
//! while converting to little endian format.
|
||||
//
|
||||
//*****************************************************************************
|
||||
|
||||
unsigned char* UINT32_TO_STREAM_f (unsigned char *p, unsigned long u32)
|
||||
{
|
||||
*(p)++ = (unsigned char)(u32);
|
||||
*(p)++ = (unsigned char)((u32) >> 8);
|
||||
*(p)++ = (unsigned char)((u32) >> 16);
|
||||
*(p)++ = (unsigned char)((u32) >> 24);
|
||||
return p;
|
||||
}
|
||||
|
||||
//*****************************************************************************
|
||||
//
|
||||
//! UINT16_TO_STREAM_f
|
||||
//!
|
||||
//! @param p pointer to the new stream
|
||||
//! @param u32 pointer to the 16 bit
|
||||
//!
|
||||
//! @return pointer to the new stream
|
||||
//!
|
||||
//! @brief This function is used for copying 16 bit to stream
|
||||
//! while converting to little endian format.
|
||||
//
|
||||
//*****************************************************************************
|
||||
|
||||
unsigned char* UINT16_TO_STREAM_f (unsigned char *p, unsigned short u16)
|
||||
{
|
||||
*(p)++ = (unsigned char)(u16);
|
||||
*(p)++ = (unsigned char)((u16) >> 8);
|
||||
return p;
|
||||
}
|
||||
|
||||
//*****************************************************************************
|
||||
//
|
||||
//! STREAM_TO_UINT16_f
|
||||
//!
|
||||
//! @param p pointer to the stream
|
||||
//! @param offset offset in the stream
|
||||
//!
|
||||
//! @return pointer to the new 16 bit
|
||||
//!
|
||||
//! @brief This function is used for copying received stream to
|
||||
//! 16 bit in little endian format.
|
||||
//
|
||||
//*****************************************************************************
|
||||
|
||||
unsigned short STREAM_TO_UINT16_f(char* p, unsigned short offset)
|
||||
{
|
||||
return (unsigned short)((unsigned short)((unsigned short)
|
||||
(*(p + offset + 1)) << 8) + (unsigned short)(*(p + offset)));
|
||||
}
|
||||
|
||||
//*****************************************************************************
|
||||
//
|
||||
//! STREAM_TO_UINT32_f
|
||||
//!
|
||||
//! @param p pointer to the stream
|
||||
//! @param offset offset in the stream
|
||||
//!
|
||||
//! @return pointer to the new 32 bit
|
||||
//!
|
||||
//! @brief This function is used for copying received stream to
|
||||
//! 32 bit in little endian format.
|
||||
//
|
||||
//*****************************************************************************
|
||||
|
||||
unsigned long STREAM_TO_UINT32_f(char* p, unsigned short offset)
|
||||
{
|
||||
return (unsigned long)((unsigned long)((unsigned long)
|
||||
(*(p + offset + 3)) << 24) + (unsigned long)((unsigned long)
|
||||
(*(p + offset + 2)) << 16) + (unsigned long)((unsigned long)
|
||||
(*(p + offset + 1)) << 8) + (unsigned long)(*(p + offset)));
|
||||
}
|
||||
|
||||
|
||||
|
||||
//*****************************************************************************
|
||||
//
|
||||
// Close the Doxygen group.
|
||||
//! @}
|
||||
//
|
||||
//*****************************************************************************
|
||||
File diff suppressed because it is too large
Load Diff
@@ -0,0 +1,230 @@
|
||||
/*****************************************************************************
|
||||
*
|
||||
* hci.c - CC3000 Host Driver Implementation.
|
||||
* Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
*
|
||||
* Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
*
|
||||
* Neither the name of Texas Instruments Incorporated nor the names of
|
||||
* its contributors may be used to endorse or promote products derived
|
||||
* from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
|
||||
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
|
||||
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
|
||||
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
||||
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
||||
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
||||
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
*****************************************************************************/
|
||||
|
||||
//*****************************************************************************
|
||||
//
|
||||
//! \addtogroup hci_app
|
||||
//! @{
|
||||
//
|
||||
//*****************************************************************************
|
||||
|
||||
#include <string.h>
|
||||
#include <nuttx/cc3000/cc3000_common.h>
|
||||
#include <nuttx/cc3000/hci.h>
|
||||
#include <nuttx/cc3000/spi.h>
|
||||
#include <nuttx/cc3000/evnt_handler.h>
|
||||
#include <nuttx/cc3000/wlan.h>
|
||||
|
||||
#define SL_PATCH_PORTION_SIZE (1000)
|
||||
|
||||
|
||||
//*****************************************************************************
|
||||
//
|
||||
//! hci_command_send
|
||||
//!
|
||||
//! @param usOpcode command operation code
|
||||
//! @param pucBuff pointer to the command's arguments buffer
|
||||
//! @param ucArgsLength length of the arguments
|
||||
//!
|
||||
//! @return none
|
||||
//!
|
||||
//! @brief Initiate an HCI command.
|
||||
//
|
||||
//*****************************************************************************
|
||||
unsigned short
|
||||
hci_command_send(unsigned short usOpcode, unsigned char *pucBuff,
|
||||
unsigned char ucArgsLength)
|
||||
{
|
||||
unsigned char *stream;
|
||||
|
||||
stream = (pucBuff + SPI_HEADER_SIZE);
|
||||
|
||||
UINT8_TO_STREAM(stream, HCI_TYPE_CMND);
|
||||
stream = UINT16_TO_STREAM(stream, usOpcode);
|
||||
UINT8_TO_STREAM(stream, ucArgsLength);
|
||||
|
||||
//Update the opcode of the event we will be waiting for
|
||||
SpiWrite(pucBuff, ucArgsLength + SIMPLE_LINK_HCI_CMND_HEADER_SIZE);
|
||||
|
||||
return(0);
|
||||
}
|
||||
|
||||
//*****************************************************************************
|
||||
//
|
||||
//! hci_data_send
|
||||
//!
|
||||
//! @param usOpcode command operation code
|
||||
//! @param ucArgs pointer to the command's arguments buffer
|
||||
//! @param usArgsLength length of the arguments
|
||||
//! @param ucTail pointer to the data buffer
|
||||
//! @param usTailLength buffer length
|
||||
//!
|
||||
//! @return none
|
||||
//!
|
||||
//! @brief Initiate an HCI data write operation
|
||||
//
|
||||
//*****************************************************************************
|
||||
long
|
||||
hci_data_send(unsigned char ucOpcode,
|
||||
unsigned char *ucArgs,
|
||||
unsigned short usArgsLength,
|
||||
unsigned short usDataLength,
|
||||
const unsigned char *ucTail,
|
||||
unsigned short usTailLength)
|
||||
{
|
||||
unsigned char *stream;
|
||||
|
||||
stream = ((ucArgs) + SPI_HEADER_SIZE);
|
||||
|
||||
UINT8_TO_STREAM(stream, HCI_TYPE_DATA);
|
||||
UINT8_TO_STREAM(stream, ucOpcode);
|
||||
UINT8_TO_STREAM(stream, usArgsLength);
|
||||
stream = UINT16_TO_STREAM(stream, usArgsLength + usDataLength + usTailLength);
|
||||
|
||||
// Send the packet over the SPI
|
||||
SpiWrite(ucArgs, SIMPLE_LINK_HCI_DATA_HEADER_SIZE + usArgsLength + usDataLength + usTailLength);
|
||||
|
||||
return(ESUCCESS);
|
||||
}
|
||||
|
||||
|
||||
//*****************************************************************************
|
||||
//
|
||||
//! hci_data_command_send
|
||||
//!
|
||||
//! @param usOpcode command operation code
|
||||
//! @param pucBuff pointer to the data buffer
|
||||
//! @param ucArgsLength arguments length
|
||||
//! @param ucDataLength data length
|
||||
//!
|
||||
//! @return none
|
||||
//!
|
||||
//! @brief Prepeare HCI header and initiate an HCI data write operation
|
||||
//
|
||||
//*****************************************************************************
|
||||
void hci_data_command_send(unsigned short usOpcode, unsigned char *pucBuff,
|
||||
unsigned char ucArgsLength,unsigned short ucDataLength)
|
||||
{
|
||||
unsigned char *stream = (pucBuff + SPI_HEADER_SIZE);
|
||||
|
||||
UINT8_TO_STREAM(stream, HCI_TYPE_DATA);
|
||||
UINT8_TO_STREAM(stream, usOpcode);
|
||||
UINT8_TO_STREAM(stream, ucArgsLength);
|
||||
stream = UINT16_TO_STREAM(stream, ucArgsLength + ucDataLength);
|
||||
|
||||
// Send the command over SPI on data channel
|
||||
SpiWrite(pucBuff, ucArgsLength + ucDataLength + SIMPLE_LINK_HCI_DATA_CMND_HEADER_SIZE);
|
||||
|
||||
return;
|
||||
}
|
||||
|
||||
//*****************************************************************************
|
||||
//
|
||||
//! hci_patch_send
|
||||
//!
|
||||
//! @param usOpcode command operation code
|
||||
//! @param pucBuff pointer to the command's arguments buffer
|
||||
//! @param patch pointer to patch content buffer
|
||||
//! @param usDataLength data length
|
||||
//!
|
||||
//! @return none
|
||||
//!
|
||||
//! @brief Prepeare HCI header and initiate an HCI patch write operation
|
||||
//
|
||||
//*****************************************************************************
|
||||
void
|
||||
hci_patch_send(unsigned char ucOpcode, unsigned char *pucBuff, char *patch, unsigned short usDataLength)
|
||||
{
|
||||
unsigned char *data_ptr = (pucBuff + SPI_HEADER_SIZE);
|
||||
unsigned short usTransLength;
|
||||
unsigned char *stream = (pucBuff + SPI_HEADER_SIZE);
|
||||
|
||||
UINT8_TO_STREAM(stream, HCI_TYPE_PATCH);
|
||||
UINT8_TO_STREAM(stream, ucOpcode);
|
||||
stream = UINT16_TO_STREAM(stream, usDataLength + SIMPLE_LINK_HCI_PATCH_HEADER_SIZE);
|
||||
|
||||
if (usDataLength <= SL_PATCH_PORTION_SIZE)
|
||||
{
|
||||
UINT16_TO_STREAM(stream, usDataLength);
|
||||
stream = UINT16_TO_STREAM(stream, usDataLength);
|
||||
memcpy((pucBuff + SPI_HEADER_SIZE) + HCI_PATCH_HEADER_SIZE, patch, usDataLength);
|
||||
|
||||
// Update the opcode of the event we will be waiting for
|
||||
SpiWrite(pucBuff, usDataLength + HCI_PATCH_HEADER_SIZE);
|
||||
}
|
||||
else
|
||||
{
|
||||
|
||||
usTransLength = (usDataLength/SL_PATCH_PORTION_SIZE);
|
||||
UINT16_TO_STREAM(stream, usDataLength + SIMPLE_LINK_HCI_PATCH_HEADER_SIZE + usTransLength*SIMPLE_LINK_HCI_PATCH_HEADER_SIZE);
|
||||
stream = UINT16_TO_STREAM(stream, SL_PATCH_PORTION_SIZE);
|
||||
memcpy(pucBuff + SPI_HEADER_SIZE + HCI_PATCH_HEADER_SIZE, patch, SL_PATCH_PORTION_SIZE);
|
||||
usDataLength -= SL_PATCH_PORTION_SIZE;
|
||||
patch += SL_PATCH_PORTION_SIZE;
|
||||
|
||||
// Update the opcode of the event we will be waiting for
|
||||
SpiWrite(pucBuff, SL_PATCH_PORTION_SIZE + HCI_PATCH_HEADER_SIZE);
|
||||
|
||||
while (usDataLength)
|
||||
{
|
||||
if (usDataLength <= SL_PATCH_PORTION_SIZE)
|
||||
{
|
||||
usTransLength = usDataLength;
|
||||
usDataLength = 0;
|
||||
|
||||
}
|
||||
else
|
||||
{
|
||||
usTransLength = SL_PATCH_PORTION_SIZE;
|
||||
usDataLength -= usTransLength;
|
||||
}
|
||||
|
||||
*(unsigned short *)data_ptr = usTransLength;
|
||||
memcpy(data_ptr + SIMPLE_LINK_HCI_PATCH_HEADER_SIZE, patch, usTransLength);
|
||||
patch += usTransLength;
|
||||
|
||||
// Update the opcode of the event we will be waiting for
|
||||
SpiWrite((unsigned char *)data_ptr, usTransLength + sizeof(usTransLength));
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
//*****************************************************************************
|
||||
//
|
||||
// Close the Doxygen group.
|
||||
//! @}
|
||||
//
|
||||
//
|
||||
//*****************************************************************************
|
||||
@@ -0,0 +1,459 @@
|
||||
/*****************************************************************************
|
||||
*
|
||||
* netapp.c - CC3000 Host Driver Implementation.
|
||||
* Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
*
|
||||
* Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
*
|
||||
* Neither the name of Texas Instruments Incorporated nor the names of
|
||||
* its contributors may be used to endorse or promote products derived
|
||||
* from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
|
||||
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
|
||||
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
|
||||
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
||||
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
||||
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
||||
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
*****************************************************************************/
|
||||
#include <string.h>
|
||||
#include <nuttx/cc3000/netapp.h>
|
||||
#include <nuttx/cc3000/hci.h>
|
||||
#include <nuttx/cc3000/socket.h>
|
||||
#include <nuttx/cc3000/evnt_handler.h>
|
||||
#include <nuttx/cc3000/nvmem.h>
|
||||
|
||||
#define MIN_TIMER_VAL_SECONDS 20
|
||||
#define MIN_TIMER_SET(t) if ((0 != t) && (t < MIN_TIMER_VAL_SECONDS)) \
|
||||
{ \
|
||||
t = MIN_TIMER_VAL_SECONDS; \
|
||||
}
|
||||
|
||||
|
||||
#define NETAPP_DHCP_PARAMS_LEN (20)
|
||||
#define NETAPP_SET_TIMER_PARAMS_LEN (20)
|
||||
#define NETAPP_SET_DEBUG_LEVEL_PARAMS_LEN (4)
|
||||
#define NETAPP_PING_SEND_PARAMS_LEN (16)
|
||||
|
||||
|
||||
//*****************************************************************************
|
||||
//
|
||||
//! netapp_config_mac_adrress
|
||||
//!
|
||||
//! @param mac device mac address, 6 bytes. Saved: yes
|
||||
//!
|
||||
//! @return return on success 0, otherwise error.
|
||||
//!
|
||||
//! @brief Configure device MAC address and store it in NVMEM.
|
||||
//! The value of the MAC address configured through the API will
|
||||
//! be stored in CC3000 non volatile memory, thus preserved
|
||||
//! over resets.
|
||||
//
|
||||
//*****************************************************************************
|
||||
long netapp_config_mac_adrress(unsigned char * mac)
|
||||
{
|
||||
return nvmem_set_mac_address(mac);
|
||||
}
|
||||
|
||||
//*****************************************************************************
|
||||
//
|
||||
//! netapp_dhcp
|
||||
//!
|
||||
//! @param aucIP device mac address, 6 bytes. Saved: yes
|
||||
//! @param aucSubnetMask device mac address, 6 bytes. Saved: yes
|
||||
//! @param aucDefaultGateway device mac address, 6 bytes. Saved: yes
|
||||
//! @param aucDNSServer device mac address, 6 bytes. Saved: yes
|
||||
//!
|
||||
//! @return return on success 0, otherwise error.
|
||||
//!
|
||||
//! @brief netapp_dhcp is used to configure the network interface,
|
||||
//! static or dynamic (DHCP).\n In order to activate DHCP mode,
|
||||
//! aucIP, aucSubnetMask, aucDefaultGateway must be 0.
|
||||
//! The default mode of CC3000 is DHCP mode.
|
||||
//! Note that the configuration is saved in non volatile memory
|
||||
//! and thus preserved over resets.
|
||||
//!
|
||||
//! @note If the mode is altered a reset of CC3000 device is required
|
||||
//! in order to apply changes.\nAlso note that asynchronous event
|
||||
//! of DHCP_EVENT, which is generated when an IP address is
|
||||
//! allocated either by the DHCP server or due to static
|
||||
//! allocation is generated only upon a connection to the
|
||||
//! AP was established.
|
||||
//!
|
||||
//*****************************************************************************
|
||||
long netapp_dhcp(unsigned long *aucIP, unsigned long *aucSubnetMask,unsigned long *aucDefaultGateway, unsigned long *aucDNSServer)
|
||||
{
|
||||
signed char scRet;
|
||||
unsigned char *ptr;
|
||||
unsigned char *args;
|
||||
|
||||
scRet = EFAIL;
|
||||
ptr = tSLInformation.pucTxCommandBuffer;
|
||||
args = (ptr + HEADERS_SIZE_CMD);
|
||||
|
||||
// Fill in temporary command buffer
|
||||
ARRAY_TO_STREAM(args,aucIP,4);
|
||||
ARRAY_TO_STREAM(args,aucSubnetMask,4);
|
||||
ARRAY_TO_STREAM(args,aucDefaultGateway,4);
|
||||
args = UINT32_TO_STREAM(args, 0);
|
||||
ARRAY_TO_STREAM(args,aucDNSServer,4);
|
||||
|
||||
// Initiate a HCI command
|
||||
hci_command_send(HCI_NETAPP_DHCP, ptr, NETAPP_DHCP_PARAMS_LEN);
|
||||
|
||||
// Wait for command complete event
|
||||
SimpleLinkWaitEvent(HCI_NETAPP_DHCP, &scRet);
|
||||
|
||||
return(scRet);
|
||||
}
|
||||
|
||||
|
||||
//*****************************************************************************
|
||||
//
|
||||
//! netapp_timeout_values
|
||||
//!
|
||||
//! @param aucDHCP DHCP lease time request, also impact
|
||||
//! the DHCP renew timeout. Range: [0-0xffffffff] seconds,
|
||||
//! 0 or 0xffffffff == infinity lease timeout.
|
||||
//! Resolution:10 seconds. Influence: only after
|
||||
//! reconnecting to the AP.
|
||||
//! Minimal bound value: MIN_TIMER_VAL_SECONDS - 20 seconds.
|
||||
//! The parameter is saved into the CC3000 NVMEM.
|
||||
//! The default value on CC3000 is 14400 seconds.
|
||||
//!
|
||||
//! @param aucARP ARP refresh timeout, if ARP entry is not updated by
|
||||
//! incoming packet, the ARP entry will be deleted by
|
||||
//! the end of the timeout.
|
||||
//! Range: [0-0xffffffff] seconds, 0 == infinity ARP timeout
|
||||
//! Resolution: 10 seconds. Influence: on runtime.
|
||||
//! Minimal bound value: MIN_TIMER_VAL_SECONDS - 20 seconds
|
||||
//! The parameter is saved into the CC3000 NVMEM.
|
||||
//! The default value on CC3000 is 3600 seconds.
|
||||
//!
|
||||
//! @param aucKeepalive Keepalive event sent by the end of keepalive timeout
|
||||
//! Range: [0-0xffffffff] seconds, 0 == infinity timeout
|
||||
//! Resolution: 10 seconds.
|
||||
//! Influence: on runtime.
|
||||
//! Minimal bound value: MIN_TIMER_VAL_SECONDS - 20 sec
|
||||
//! The parameter is saved into the CC3000 NVMEM.
|
||||
//! The default value on CC3000 is 10 seconds.
|
||||
//!
|
||||
//! @param aucInactivity Socket inactivity timeout, socket timeout is
|
||||
//! refreshed by incoming or outgoing packet, by the
|
||||
//! end of the socket timeout the socket will be closed
|
||||
//! Range: [0-0xffffffff] sec, 0 == infinity timeout.
|
||||
//! Resolution: 10 seconds. Influence: on runtime.
|
||||
//! Minimal bound value: MIN_TIMER_VAL_SECONDS - 20 sec
|
||||
//! The parameter is saved into the CC3000 NVMEM.
|
||||
//! The default value on CC3000 is 60 seconds.
|
||||
//!
|
||||
//! @return return on success 0, otherwise error.
|
||||
//!
|
||||
//! @brief Set new timeout values. Function set new timeout values for:
|
||||
//! DHCP lease timeout, ARP refresh timeout, keepalive event
|
||||
//! timeout and socket inactivity timeout
|
||||
//!
|
||||
//! @note If a parameter set to non zero value which is less than 20s,
|
||||
//! it will be set automatically to 20s.
|
||||
//!
|
||||
//*****************************************************************************
|
||||
|
||||
#ifndef CC3000_TINY_DRIVER
|
||||
long
|
||||
netapp_timeout_values(unsigned long *aucDHCP, unsigned long *aucARP,unsigned long *aucKeepalive, unsigned long *aucInactivity)
|
||||
{
|
||||
signed char scRet;
|
||||
unsigned char *ptr;
|
||||
unsigned char *args;
|
||||
|
||||
scRet = EFAIL;
|
||||
ptr = tSLInformation.pucTxCommandBuffer;
|
||||
args = (ptr + HEADERS_SIZE_CMD);
|
||||
|
||||
// Set minimal values of timers
|
||||
MIN_TIMER_SET(*aucDHCP)
|
||||
MIN_TIMER_SET(*aucARP)
|
||||
MIN_TIMER_SET(*aucKeepalive)
|
||||
MIN_TIMER_SET(*aucInactivity)
|
||||
|
||||
// Fill in temporary command buffer
|
||||
args = UINT32_TO_STREAM(args, *aucDHCP);
|
||||
args = UINT32_TO_STREAM(args, *aucARP);
|
||||
args = UINT32_TO_STREAM(args, *aucKeepalive);
|
||||
args = UINT32_TO_STREAM(args, *aucInactivity);
|
||||
|
||||
// Initiate a HCI command
|
||||
hci_command_send(HCI_NETAPP_SET_TIMERS, ptr, NETAPP_SET_TIMER_PARAMS_LEN);
|
||||
|
||||
// Wait for command complete event
|
||||
SimpleLinkWaitEvent(HCI_NETAPP_SET_TIMERS, &scRet);
|
||||
|
||||
return(scRet);
|
||||
}
|
||||
#endif
|
||||
|
||||
|
||||
//*****************************************************************************
|
||||
//
|
||||
//! netapp_ping_send
|
||||
//!
|
||||
//! @param ip destination IP address
|
||||
//! @param pingAttempts number of echo requests to send
|
||||
//! @param pingSize send buffer size which may be up to 1400 bytes
|
||||
//! @param pingTimeout Time to wait for a response,in milliseconds.
|
||||
//!
|
||||
//! @return return on success 0, otherwise error.
|
||||
//!
|
||||
//! @brief send ICMP ECHO_REQUEST to network hosts
|
||||
//!
|
||||
//! @note If an operation finished successfully asynchronous ping report
|
||||
//! event will be generated. The report structure is as defined
|
||||
//! by structure netapp_pingreport_args_t.
|
||||
//!
|
||||
//! @warning Calling this function while a previous Ping Requests are in
|
||||
//! progress will stop the previous ping request.
|
||||
//*****************************************************************************
|
||||
|
||||
#ifndef CC3000_TINY_DRIVER
|
||||
long
|
||||
netapp_ping_send(unsigned long *ip, unsigned long ulPingAttempts, unsigned long ulPingSize, unsigned long ulPingTimeout)
|
||||
{
|
||||
signed char scRet;
|
||||
unsigned char *ptr, *args;
|
||||
|
||||
scRet = EFAIL;
|
||||
ptr = tSLInformation.pucTxCommandBuffer;
|
||||
args = (ptr + HEADERS_SIZE_CMD);
|
||||
|
||||
// Fill in temporary command buffer
|
||||
args = UINT32_TO_STREAM(args, *ip);
|
||||
args = UINT32_TO_STREAM(args, ulPingAttempts);
|
||||
args = UINT32_TO_STREAM(args, ulPingSize);
|
||||
args = UINT32_TO_STREAM(args, ulPingTimeout);
|
||||
|
||||
// Initiate a HCI command
|
||||
hci_command_send(HCI_NETAPP_PING_SEND, ptr, NETAPP_PING_SEND_PARAMS_LEN);
|
||||
|
||||
// Wait for command complete event
|
||||
SimpleLinkWaitEvent(HCI_NETAPP_PING_SEND, &scRet);
|
||||
|
||||
return(scRet);
|
||||
}
|
||||
#endif
|
||||
|
||||
//*****************************************************************************
|
||||
//
|
||||
//! netapp_ping_report
|
||||
//!
|
||||
//! @param none
|
||||
//!
|
||||
//! @return none
|
||||
//!
|
||||
//! @brief Request for ping status. This API triggers the CC3000 to send
|
||||
//! asynchronous events: HCI_EVNT_WLAN_ASYNC_PING_REPORT.
|
||||
//! This event will carry the report structure:
|
||||
//! netapp_pingreport_args_t. This structure is filled in with ping
|
||||
//! results up till point of triggering API.
|
||||
//! netapp_pingreport_args_t:\n packets_sent - echo sent,
|
||||
//! packets_received - echo reply, min_round_time - minimum
|
||||
//! round time, max_round_time - max round time,
|
||||
//! avg_round_time - average round time
|
||||
//!
|
||||
//! @note When a ping operation is not active, the returned structure
|
||||
//! fields are 0.
|
||||
//!
|
||||
//*****************************************************************************
|
||||
|
||||
|
||||
#ifndef CC3000_TINY_DRIVER
|
||||
void netapp_ping_report(void)
|
||||
{
|
||||
unsigned char *ptr;
|
||||
ptr = tSLInformation.pucTxCommandBuffer;
|
||||
signed char scRet;
|
||||
|
||||
scRet = EFAIL;
|
||||
|
||||
// Initiate a HCI command
|
||||
hci_command_send(HCI_NETAPP_PING_REPORT, ptr, 0);
|
||||
|
||||
// Wait for command complete event
|
||||
SimpleLinkWaitEvent(HCI_NETAPP_PING_REPORT, &scRet);
|
||||
}
|
||||
#endif
|
||||
|
||||
//*****************************************************************************
|
||||
//
|
||||
//! netapp_ping_stop
|
||||
//!
|
||||
//! @param none
|
||||
//!
|
||||
//! @return On success, zero is returned. On error, -1 is returned.
|
||||
//!
|
||||
//! @brief Stop any ping request.
|
||||
//!
|
||||
//!
|
||||
//*****************************************************************************
|
||||
|
||||
#ifndef CC3000_TINY_DRIVER
|
||||
long netapp_ping_stop(void)
|
||||
{
|
||||
signed char scRet;
|
||||
unsigned char *ptr;
|
||||
|
||||
scRet = EFAIL;
|
||||
ptr = tSLInformation.pucTxCommandBuffer;
|
||||
|
||||
// Initiate a HCI command
|
||||
hci_command_send(HCI_NETAPP_PING_STOP, ptr, 0);
|
||||
|
||||
// Wait for command complete event
|
||||
SimpleLinkWaitEvent(HCI_NETAPP_PING_STOP, &scRet);
|
||||
|
||||
return(scRet);
|
||||
}
|
||||
#endif
|
||||
|
||||
//*****************************************************************************
|
||||
//
|
||||
//! netapp_ipconfig
|
||||
//!
|
||||
//! @param[out] ipconfig This argument is a pointer to a
|
||||
//! tNetappIpconfigRetArgs structure. This structure is
|
||||
//! filled in with the network interface configuration.
|
||||
//! tNetappIpconfigRetArgs:\n aucIP - ip address,
|
||||
//! aucSubnetMask - mask, aucDefaultGateway - default
|
||||
//! gateway address, aucDHCPServer - dhcp server address
|
||||
//! aucDNSServer - dns server address, uaMacAddr - mac
|
||||
//! address, uaSSID - connected AP ssid
|
||||
//!
|
||||
//! @return none
|
||||
//!
|
||||
//! @brief Obtain the CC3000 Network interface information.
|
||||
//! Note that the information is available only after the WLAN
|
||||
//! connection was established. Calling this function before
|
||||
//! associated, will cause non-defined values to be returned.
|
||||
//!
|
||||
//! @note The function is useful for figuring out the IP Configuration of
|
||||
//! the device when DHCP is used and for figuring out the SSID of
|
||||
//! the Wireless network the device is associated with.
|
||||
//!
|
||||
//*****************************************************************************
|
||||
|
||||
#ifndef CC3000_TINY_DRIVER
|
||||
void netapp_ipconfig( tNetappIpconfigRetArgs * ipconfig )
|
||||
{
|
||||
unsigned char *ptr;
|
||||
|
||||
ptr = tSLInformation.pucTxCommandBuffer;
|
||||
|
||||
// Initiate a HCI command
|
||||
hci_command_send(HCI_NETAPP_IPCONFIG, ptr, 0);
|
||||
|
||||
// Wait for command complete event
|
||||
SimpleLinkWaitEvent(HCI_NETAPP_IPCONFIG, ipconfig );
|
||||
|
||||
}
|
||||
#else
|
||||
void netapp_ipconfig( tNetappIpconfigRetArgs * ipconfig )
|
||||
{
|
||||
|
||||
}
|
||||
#endif
|
||||
|
||||
//*****************************************************************************
|
||||
//
|
||||
//! netapp_arp_flush
|
||||
//!
|
||||
//! @param none
|
||||
//!
|
||||
//! @return none
|
||||
//!
|
||||
//! @brief Flushes ARP table
|
||||
//!
|
||||
//*****************************************************************************
|
||||
|
||||
#ifndef CC3000_TINY_DRIVER
|
||||
long netapp_arp_flush(void)
|
||||
{
|
||||
signed char scRet;
|
||||
unsigned char *ptr;
|
||||
|
||||
scRet = EFAIL;
|
||||
ptr = tSLInformation.pucTxCommandBuffer;
|
||||
|
||||
// Initiate a HCI command
|
||||
hci_command_send(HCI_NETAPP_ARP_FLUSH, ptr, 0);
|
||||
|
||||
// Wait for command complete event
|
||||
SimpleLinkWaitEvent(HCI_NETAPP_ARP_FLUSH, &scRet);
|
||||
|
||||
return(scRet);
|
||||
}
|
||||
#endif
|
||||
|
||||
//*****************************************************************************
|
||||
//
|
||||
//! netapp_set_debug_level
|
||||
//!
|
||||
//! @param[in] level debug level. Bitwise [0-8],
|
||||
//! 0(disable)or 1(enable).\n Bitwise map: 0 - Critical
|
||||
//! message, 1 information message, 2 - core messages, 3 -
|
||||
//! HCI messages, 4 - Network stack messages, 5 - wlan
|
||||
//! messages, 6 - wlan driver messages, 7 - epprom messages,
|
||||
//! 8 - general messages. Default: 0x13f. Saved: no
|
||||
//!
|
||||
//! @return On success, zero is returned. On error, -1 is returned
|
||||
//!
|
||||
//! @brief Debug messages sent via the UART debug channel, this function
|
||||
//! enable/disable the debug level
|
||||
//!
|
||||
//*****************************************************************************
|
||||
|
||||
|
||||
#ifndef CC3000_TINY_DRIVER
|
||||
long netapp_set_debug_level(unsigned long ulLevel)
|
||||
{
|
||||
signed char scRet;
|
||||
unsigned char *ptr, *args;
|
||||
|
||||
scRet = EFAIL;
|
||||
ptr = tSLInformation.pucTxCommandBuffer;
|
||||
args = (ptr + HEADERS_SIZE_CMD);
|
||||
|
||||
//
|
||||
// Fill in temporary command buffer
|
||||
//
|
||||
args = UINT32_TO_STREAM(args, ulLevel);
|
||||
|
||||
|
||||
//
|
||||
// Initiate a HCI command
|
||||
//
|
||||
hci_command_send(HCI_NETAPP_SET_DEBUG_LEVEL, ptr, NETAPP_SET_DEBUG_LEVEL_PARAMS_LEN);
|
||||
|
||||
//
|
||||
// Wait for command complete event
|
||||
//
|
||||
SimpleLinkWaitEvent(HCI_NETAPP_SET_DEBUG_LEVEL, &scRet);
|
||||
|
||||
return(scRet);
|
||||
|
||||
}
|
||||
#endif
|
||||
@@ -0,0 +1,340 @@
|
||||
/*****************************************************************************
|
||||
*
|
||||
* nvmem.c - CC3000 Host Driver Implementation.
|
||||
* Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
*
|
||||
* Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
*
|
||||
* Neither the name of Texas Instruments Incorporated nor the names of
|
||||
* its contributors may be used to endorse or promote products derived
|
||||
* from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
|
||||
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
|
||||
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
|
||||
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
||||
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
||||
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
||||
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
*****************************************************************************/
|
||||
|
||||
//*****************************************************************************
|
||||
//
|
||||
//! \addtogroup nvmem_api
|
||||
//! @{
|
||||
//
|
||||
//*****************************************************************************
|
||||
|
||||
#include <stdio.h>
|
||||
#include <string.h>
|
||||
#include <nuttx/cc3000/nvmem.h>
|
||||
#include <nuttx/cc3000/hci.h>
|
||||
#include <nuttx/cc3000/socket.h>
|
||||
#include <nuttx/cc3000/evnt_handler.h>
|
||||
|
||||
//*****************************************************************************
|
||||
//
|
||||
// Prototypes for the structures for APIs.
|
||||
//
|
||||
//*****************************************************************************
|
||||
|
||||
#define NVMEM_READ_PARAMS_LEN (12)
|
||||
#define NVMEM_CREATE_PARAMS_LEN (8)
|
||||
#define NVMEM_WRITE_PARAMS_LEN (16)
|
||||
|
||||
//*****************************************************************************
|
||||
//
|
||||
//! nvmem_read
|
||||
//!
|
||||
//! @param ulFileId nvmem file id:\n
|
||||
//! NVMEM_NVS_FILEID, NVMEM_NVS_SHADOW_FILEID,
|
||||
//! NVMEM_WLAN_CONFIG_FILEID, NVMEM_WLAN_CONFIG_SHADOW_FILEID,
|
||||
//! NVMEM_WLAN_DRIVER_SP_FILEID, NVMEM_WLAN_FW_SP_FILEID,
|
||||
//! NVMEM_MAC_FILEID, NVMEM_FRONTEND_VARS_FILEID,
|
||||
//! NVMEM_IP_CONFIG_FILEID, NVMEM_IP_CONFIG_SHADOW_FILEID,
|
||||
//! NVMEM_BOOTLOADER_SP_FILEID, NVMEM_RM_FILEID,
|
||||
//! and user files 12-15.
|
||||
//! @param ulLength number of bytes to read
|
||||
//! @param ulOffset ulOffset in file from where to read
|
||||
//! @param buff output buffer pointer
|
||||
//!
|
||||
//! @return number of bytes read, otherwise error.
|
||||
//!
|
||||
//! @brief Reads data from the file referred by the ulFileId parameter.
|
||||
//! Reads data from file ulOffset till length. Err if the file can't
|
||||
//! be used, is invalid, or if the read is out of bounds.
|
||||
//!
|
||||
//*****************************************************************************
|
||||
|
||||
signed long
|
||||
nvmem_read(unsigned long ulFileId, unsigned long ulLength, unsigned long ulOffset, unsigned char *buff)
|
||||
{
|
||||
unsigned char ucStatus = 0xFF;
|
||||
unsigned char *ptr;
|
||||
unsigned char *args;
|
||||
|
||||
ptr = tSLInformation.pucTxCommandBuffer;
|
||||
args = (ptr + HEADERS_SIZE_CMD);
|
||||
|
||||
// Fill in HCI packet structure
|
||||
args = UINT32_TO_STREAM(args, ulFileId);
|
||||
args = UINT32_TO_STREAM(args, ulLength);
|
||||
args = UINT32_TO_STREAM(args, ulOffset);
|
||||
|
||||
// Initiate a HCI command
|
||||
hci_command_send(HCI_CMND_NVMEM_READ, ptr, NVMEM_READ_PARAMS_LEN);
|
||||
SimpleLinkWaitEvent(HCI_CMND_NVMEM_READ, &ucStatus);
|
||||
|
||||
// In case there is data - read it - even if an error code is returned
|
||||
// Note: It is the user responsibility to ignore the data in case of an error code
|
||||
|
||||
// Wait for the data in a synchronous way. Here we assume that the buffer is
|
||||
// big enough to store also parameters of nvmem
|
||||
|
||||
SimpleLinkWaitData(buff, 0, 0);
|
||||
|
||||
return(ucStatus);
|
||||
}
|
||||
|
||||
//*****************************************************************************
|
||||
//
|
||||
//! nvmem_write
|
||||
//!
|
||||
//! @param ulFileId nvmem file id:\n
|
||||
//! NVMEM_WLAN_DRIVER_SP_FILEID, NVMEM_WLAN_FW_SP_FILEID,
|
||||
//! NVMEM_MAC_FILEID, NVMEM_BOOTLOADER_SP_FILEID,
|
||||
//! and user files 12-15.
|
||||
//! @param ulLength number of bytes to write
|
||||
//! @param ulEntryOffset offset in file to start write operation from
|
||||
//! @param buff data to write
|
||||
//!
|
||||
//! @return on success 0, error otherwise.
|
||||
//!
|
||||
//! @brief Write data to nvmem.
|
||||
//! writes data to file referred by the ulFileId parameter.
|
||||
//! Writes data to file ulOffset till ulLength.The file id will be
|
||||
//! marked invalid till the write is done. The file entry doesn't
|
||||
//! need to be valid - only allocated.
|
||||
//!
|
||||
//*****************************************************************************
|
||||
|
||||
signed long
|
||||
nvmem_write(unsigned long ulFileId, unsigned long ulLength, unsigned long
|
||||
ulEntryOffset, unsigned char *buff)
|
||||
{
|
||||
long iRes;
|
||||
unsigned char *ptr;
|
||||
unsigned char *args;
|
||||
|
||||
iRes = EFAIL;
|
||||
|
||||
ptr = tSLInformation.pucTxCommandBuffer;
|
||||
args = (ptr + SPI_HEADER_SIZE + HCI_DATA_CMD_HEADER_SIZE);
|
||||
|
||||
// Fill in HCI packet structure
|
||||
args = UINT32_TO_STREAM(args, ulFileId);
|
||||
args = UINT32_TO_STREAM(args, 12);
|
||||
args = UINT32_TO_STREAM(args, ulLength);
|
||||
args = UINT32_TO_STREAM(args, ulEntryOffset);
|
||||
|
||||
memcpy((ptr + SPI_HEADER_SIZE + HCI_DATA_CMD_HEADER_SIZE +
|
||||
NVMEM_WRITE_PARAMS_LEN),buff,ulLength);
|
||||
|
||||
// Initiate a HCI command but it will come on data channel
|
||||
hci_data_command_send(HCI_CMND_NVMEM_WRITE, ptr, NVMEM_WRITE_PARAMS_LEN,
|
||||
ulLength);
|
||||
|
||||
SimpleLinkWaitEvent(HCI_EVNT_NVMEM_WRITE, &iRes);
|
||||
|
||||
return(iRes);
|
||||
}
|
||||
|
||||
|
||||
//*****************************************************************************
|
||||
//
|
||||
//! nvmem_set_mac_address
|
||||
//!
|
||||
//! @param mac mac address to be set
|
||||
//!
|
||||
//! @return on success 0, error otherwise.
|
||||
//!
|
||||
//! @brief Write MAC address to EEPROM.
|
||||
//! mac address as appears over the air (OUI first)
|
||||
//!
|
||||
//*****************************************************************************
|
||||
|
||||
unsigned char nvmem_set_mac_address(unsigned char *mac)
|
||||
{
|
||||
return nvmem_write(NVMEM_MAC_FILEID, MAC_ADDR_LEN, 0, mac);
|
||||
}
|
||||
|
||||
//*****************************************************************************
|
||||
//
|
||||
//! nvmem_get_mac_address
|
||||
//!
|
||||
//! @param[out] mac mac address
|
||||
//!
|
||||
//! @return on success 0, error otherwise.
|
||||
//!
|
||||
//! @brief Read MAC address from EEPROM.
|
||||
//! mac address as appears over the air (OUI first)
|
||||
//!
|
||||
//*****************************************************************************
|
||||
|
||||
unsigned char nvmem_get_mac_address(unsigned char *mac)
|
||||
{
|
||||
return nvmem_read(NVMEM_MAC_FILEID, MAC_ADDR_LEN, 0, mac);
|
||||
}
|
||||
|
||||
//*****************************************************************************
|
||||
//
|
||||
//! nvmem_write_patch
|
||||
//!
|
||||
//! @param ulFileId nvmem file id:\n
|
||||
//! NVMEM_WLAN_DRIVER_SP_FILEID, NVMEM_WLAN_FW_SP_FILEID,
|
||||
//! @param spLength number of bytes to write
|
||||
//! @param spData SP data to write
|
||||
//!
|
||||
//! @return on success 0, error otherwise.
|
||||
//!
|
||||
//! @brief program a patch to a specific file ID.
|
||||
//! The SP data is assumed to be organized in 2-dimensional.
|
||||
//! Each line is SP_PORTION_SIZE bytes long. Actual programming is
|
||||
//! applied in SP_PORTION_SIZE bytes portions.
|
||||
//!
|
||||
//*****************************************************************************
|
||||
|
||||
unsigned char nvmem_write_patch(unsigned long ulFileId, unsigned long spLength, const unsigned char *spData)
|
||||
{
|
||||
unsigned char status = 0;
|
||||
unsigned short offset = 0;
|
||||
unsigned char* spDataPtr = (unsigned char*)spData;
|
||||
|
||||
while ((status == 0) && (spLength >= SP_PORTION_SIZE))
|
||||
{
|
||||
status = nvmem_write(ulFileId, SP_PORTION_SIZE, offset, spDataPtr);
|
||||
offset += SP_PORTION_SIZE;
|
||||
spLength -= SP_PORTION_SIZE;
|
||||
spDataPtr += SP_PORTION_SIZE;
|
||||
}
|
||||
|
||||
if (status !=0)
|
||||
{
|
||||
// NVMEM error occurred
|
||||
return status;
|
||||
}
|
||||
|
||||
if (spLength != 0)
|
||||
{
|
||||
// if reached here, a reminder is left
|
||||
status = nvmem_write(ulFileId, spLength, offset, spDataPtr);
|
||||
}
|
||||
|
||||
return status;
|
||||
}
|
||||
|
||||
//*****************************************************************************
|
||||
//
|
||||
//! nvmem_read_sp_version
|
||||
//!
|
||||
//! @param[out] patchVer first number indicates package ID and the second
|
||||
//! number indicates package build number
|
||||
//!
|
||||
//! @return on success 0, error otherwise.
|
||||
//!
|
||||
//! @brief Read patch version. read package version (WiFi FW patch,
|
||||
//! driver-supplicant-NS patch, bootloader patch)
|
||||
//!
|
||||
//*****************************************************************************
|
||||
|
||||
#ifndef CC3000_TINY_DRIVER
|
||||
unsigned char nvmem_read_sp_version(unsigned char* patchVer)
|
||||
{
|
||||
unsigned char *ptr;
|
||||
// 1st byte is the status and the rest is the SP version
|
||||
unsigned char retBuf[5];
|
||||
|
||||
ptr = tSLInformation.pucTxCommandBuffer;
|
||||
|
||||
// Initiate a HCI command, no args are required
|
||||
hci_command_send(HCI_CMND_READ_SP_VERSION, ptr, 0);
|
||||
SimpleLinkWaitEvent(HCI_CMND_READ_SP_VERSION, retBuf);
|
||||
|
||||
// package ID
|
||||
*patchVer = retBuf[3];
|
||||
// package build number
|
||||
*(patchVer+1) = retBuf[4];
|
||||
|
||||
return(retBuf[0]);
|
||||
}
|
||||
#endif
|
||||
|
||||
//*****************************************************************************
|
||||
//
|
||||
//! nvmem_create_entry
|
||||
//!
|
||||
//! @param ulFileId nvmem file Id:\n
|
||||
//! * NVMEM_AES128_KEY_FILEID: 12
|
||||
//! * NVMEM_SHARED_MEM_FILEID: 13
|
||||
//! * and fileIDs 14 and 15
|
||||
//! @param ulNewLen entry ulLength
|
||||
//!
|
||||
//! @return on success 0, error otherwise.
|
||||
//!
|
||||
//! @brief Create new file entry and allocate space on the NVMEM.
|
||||
//! Applies only to user files.
|
||||
//! Modify the size of file.
|
||||
//! If the entry is unallocated - allocate it to size
|
||||
//! ulNewLen (marked invalid).
|
||||
//! If it is allocated then deallocate it first.
|
||||
//! To just mark the file as invalid without resizing -
|
||||
//! set ulNewLen=0.
|
||||
//!
|
||||
//*****************************************************************************
|
||||
|
||||
signed long
|
||||
nvmem_create_entry(unsigned long ulFileId, unsigned long ulNewLen)
|
||||
{
|
||||
unsigned char *ptr;
|
||||
unsigned char *args;
|
||||
unsigned short retval;
|
||||
|
||||
ptr = tSLInformation.pucTxCommandBuffer;
|
||||
args = (ptr + HEADERS_SIZE_CMD);
|
||||
|
||||
// Fill in HCI packet structure
|
||||
args = UINT32_TO_STREAM(args, ulFileId);
|
||||
args = UINT32_TO_STREAM(args, ulNewLen);
|
||||
|
||||
// Initiate a HCI command
|
||||
hci_command_send(HCI_CMND_NVMEM_CREATE_ENTRY,ptr, NVMEM_CREATE_PARAMS_LEN);
|
||||
|
||||
SimpleLinkWaitEvent(HCI_CMND_NVMEM_CREATE_ENTRY, &retval);
|
||||
|
||||
return(retval);
|
||||
}
|
||||
|
||||
|
||||
|
||||
//*****************************************************************************
|
||||
//
|
||||
// Close the Doxygen group.
|
||||
//! @}
|
||||
//
|
||||
//*****************************************************************************
|
||||
|
||||
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
Reference in New Issue
Block a user