For PIC32MX MCUs, rename up_spiinitialize to pic32mx_spibus_initialize

configs/mirtoo/README.txt

@@ -589,7 +589,7 @@ Analog Input
 
   /* Get the SPI port */
 
-  spi = up_spiinitialize(2);
+  spi = pic32mx_spibus_initialize(2);
   if (!spi)
     {
       dbg("ERROR: Failed to initialize SPI port 2\n");

configs/mirtoo/src/pic32_nsh.c

@@ -107,7 +107,7 @@ int board_app_initialize(void)
 
   /* Get the SPI port */
 
-  spi = up_spiinitialize(2);
+  spi = pic32mx_spibus_initialize(2);
   if (!spi)
     {
       fdbg("ERROR: Failed to initialize SPI port 2\n");

configs/mirtoo/src/pic32_spi2.c

@@ -149,7 +149,7 @@ void weak_function pic32mx_spi2initialize(void)
  *   These external functions must be provided by board-specific logic.  They are
  *   implementations of the select, status, and cmddata methods of the SPI interface
  *   defined by struct spi_ops_s (see include/nuttx/spi/spi.h). All other methods
- *   including up_spiinitialize()) are provided by common PIC32MX logic.  To use
+ *   including pic32mx_spibus_initialize()) are provided by common PIC32MX logic.  To use
  *   this common SPI logic on your board:
  *
  *   1. Provide logic in pic32mx_boardinitialize() to configure SPI chip select
@@ -161,9 +161,9 @@ void weak_function pic32mx_spi2initialize(void)
  *      pic32mx_spiNcmddata() functions in your board-specific logic.  These
  *      functions will perform cmd/data selection operations using GPIOs in the way
  *      your board is configured.
- *   3. Add a call to up_spiinitialize() in your low level application
+ *   3. Add a call to pic32mx_spibus_initialize() in your low level application
  *      initialization logic
- *   4. The handle returned by up_spiinitialize() may then be used to bind the
+ *   4. The handle returned by pic32mx_spibus_initialize() may then be used to bind the
  *      SPI driver to higher level logic (e.g., calling
  *      mmcsd_spislotinitialize(), for example, will bind the SPI driver to
  *      the SPI MMC/SD driver).

configs/pic32mx-starterkit/src/pic32mx_boot.c

@@ -74,14 +74,14 @@
 void pic32mx_boardinitialize(void)
 {
   /* Configure SPI chip selects if 1) at least one SPI is enabled, and 2) the weak
-   * function pic32mx_spiinitialize() has been brought into the link.
+   * function pic32mx_spidev_initialize() has been brought into the link.
    */
 
 #if defined(CONFIG_PIC32MX_SPI1) || defined(CONFIG_PIC32MX_SPI2) || \
     defined(CONFIG_PIC32MX_SPI3) || defined(CONFIG_PIC32MX_SPI4)
-  if (pic32mx_spiinitialize)
+  if (pic32mx_spidev_initialize)
     {
-      pic32mx_spiinitialize();
+      pic32mx_spidev_initialize();
     }
 #endif
 

configs/pic32mx-starterkit/src/pic32mx_nsh.c

@@ -220,7 +220,7 @@ static int nsh_sdinitialize(void)
 
   /* Get the SPI port */
 
-  ssp = up_spiinitialize(CONFIG_NSH_MMCSDSPIPORTNO);
+  ssp = pic32mx_spibus_initialize(CONFIG_NSH_MMCSDSPIPORTNO);
   if (!ssp)
     {
       syslog(LOG_ERR, "ERROR: Failed to initialize SPI port %d\n",

configs/pic32mx-starterkit/src/pic32mx_spi.c

@@ -107,7 +107,7 @@ void weak_function pic32mx_sspinitialize(void)
  *   These external functions must be provided by board-specific logic.  They are
  *   implementations of the select, status, and cmddata methods of the SPI interface
  *   defined by struct spi_ops_s (see include/nuttx/spi/spi.h). All other methods
- *   including up_spiinitialize()) are provided by common PIC32MX logic.  To use
+ *   including pic32mx_spibus_initialize()) are provided by common PIC32MX logic.  To use
  *   this common SPI logic on your board:
  *
  *   1. Provide logic in pic32mx_boardinitialize() to configure SPI/SSP chip select
@@ -119,9 +119,9 @@ void weak_function pic32mx_sspinitialize(void)
  *      pic32mx_spiNcmddata() functions in your board-specific logic.  These
  *      functions will perform cmd/data selection operations using GPIOs in the way
  *      your board is configured.
- *   3. Add a call to up_spiinitialize() in your low level application
+ *   3. Add a call to pic32mx_spibus_initialize() in your low level application
  *      initialization logic
- *   4. The handle returned by up_spiinitialize() may then be used to bind the
+ *   4. The handle returned by pic32mx_spibus_initialize() may then be used to bind the
  *      SPI driver to higher level logic (e.g., calling
  *      mmcsd_spislotinitialize(), for example, will bind the SPI driver to
  *      the SPI MMC/SD driver).

configs/pic32mx7mmb/src/pic32_boot.c

@@ -74,14 +74,14 @@
 void pic32mx_boardinitialize(void)
 {
   /* Configure SPI chip selects if 1) at least one SPI is enabled, and 2) the weak
-   * function pic32mx_spiinitialize() has been brought into the link.
+   * function pic32mx_spidev_initialize() has been brought into the link.
    */
 
 #if defined(CONFIG_PIC32MX_SPI1) || defined(CONFIG_PIC32MX_SPI2) || \
     defined(CONFIG_PIC32MX_SPI3) || defined(CONFIG_PIC32MX_SPI4)
-  if (pic32mx_spiinitialize)
+  if (pic32mx_spidev_initialize)
     {
-      pic32mx_spiinitialize();
+      pic32mx_spidev_initialize();
     }
 #endif
 

configs/pic32mx7mmb/src/pic32_nsh.c

@@ -219,7 +219,7 @@ static int nsh_sdinitialize(void)
 
   /* Get the SPI port */
 
-  spi = up_spiinitialize(CONFIG_NSH_MMCSDSPIPORTNO);
+  spi = pic32mx_spibus_initialize(CONFIG_NSH_MMCSDSPIPORTNO);
   if (!spi)
     {
       syslog(LOG_ERR, "ERROR: Failed to initialize SPI port %d\n",

configs/pic32mx7mmb/src/pic32_spi.c

@@ -97,7 +97,7 @@
  ************************************************************************************/
 
 /************************************************************************************
- * Name: pic32mx_spiinitialize
+ * Name: pic32mx_spidev_initialize
  *
  * Description:
  *   Called to configure SPI chip select GPIO pins for the Mikroelektronka PIC32MX7
@@ -105,7 +105,7 @@
  *
  ************************************************************************************/
 
-void weak_function pic32mx_spiinitialize(void)
+void weak_function pic32mx_spidev_initialize(void)
 {
   /* Configure the SPI chip select, write protect, and card detect GPIOs */
 
@@ -123,7 +123,7 @@ void weak_function pic32mx_spiinitialize(void)
  *   These external functions must be provided by board-specific logic.  They are
  *   implementations of the select, status, and cmddata methods of the SPI interface
  *   defined by struct spi_ops_s (see include/nuttx/spi/spi.h). All other methods
- *   including up_spiinitialize()) are provided by common PIC32MX logic.  To use
+ *   including pic32mx_spibus_initialize()) are provided by common PIC32MX logic.  To use
  *   this common SPI logic on your board:
  *
  *   1. Provide logic in pic32mx_boardinitialize() to configure SPI chip select
@@ -135,9 +135,9 @@ void weak_function pic32mx_spiinitialize(void)
  *      pic32mx_spiNcmddata() functions in your board-specific logic.  These
  *      functions will perform cmd/data selection operations using GPIOs in the way
  *      your board is configured.
- *   3. Add a call to up_spiinitialize() in your low level application
+ *   3. Add a call to pic32mx_spibus_initialize() in your low level application
  *      initialization logic
- *   4. The handle returned by up_spiinitialize() may then be used to bind the
+ *   4. The handle returned by pic32mx_spibus_initialize() may then be used to bind the
  *      SPI driver to higher level logic (e.g., calling
  *      mmcsd_spislotinitialize(), for example, will bind the SPI driver to
  *      the SPI MMC/SD driver).

configs/sure-pic32mx/src/pic32mx_boot.c

@@ -74,13 +74,13 @@
 void pic32mx_boardinitialize(void)
 {
   /* Configure SPI chip selects if 1) at least one SPI is enabled, and 2) the weak
-   * function pic32mx_spiinitialize() has been brought into the link.
+   * function pic32mx_spidev_initialize() has been brought into the link.
    */
 
 #if defined(CONFIG_PIC32MX_SPI2)
-  if (pic32mx_spiinitialize)
+  if (pic32mx_spidev_initialize)
     {
-      pic32mx_spiinitialize();
+      pic32mx_spidev_initialize();
     }
 #endif
 

configs/sure-pic32mx/src/pic32mx_nsh.c

@@ -212,7 +212,7 @@ static int nsh_sdinitialize(void)
 
   /* Get the SPI port */
 
-  spi = up_spiinitialize(CONFIG_NSH_MMCSDSPIPORTNO);
+  spi = pic32mx_spibus_initialize(CONFIG_NSH_MMCSDSPIPORTNO);
   if (!spi)
     {
       syslog(LOG_ERR, "ERROR: Failed to initialize SPI port %d\n",

configs/sure-pic32mx/src/pic32mx_spi.c

@@ -150,14 +150,14 @@
  ************************************************************************************/
 
 /************************************************************************************
- * Name: pic32mx_spiinitialize
+ * Name: pic32mx_spidev_initialize
  *
  * Description:
  *   Called to configure SPI chip select GPIO pins for the Sure PIC32MX board.
  *
  ************************************************************************************/
 
-void weak_function pic32mx_spiinitialize(void)
+void weak_function pic32mx_spidev_initialize(void)
 {
   /* Configure the SPI2 chip select (CS) GPIO output, and the card detect (CD) and
    * write protect (WP) inputs.
@@ -182,7 +182,7 @@ void weak_function pic32mx_spiinitialize(void)
  *   The external functions, pic32mx_spi2select and pic32mx_spi2status
  *   must be provided by board-specific logic.  They are implementations of the select
  *   and status methods of the SPI interface defined by struct spi_ops_s (see
- *   include/nuttx/spi/spi.h). All other methods (including up_spiinitialize())
+ *   include/nuttx/spi/spi.h). All other methods (including pic32mx_spibus_initialize())
  *   are provided by common PIC32MX logic.  To use this common SPI logic on your
  *   board:
  *
@@ -191,9 +191,9 @@ void weak_function pic32mx_spiinitialize(void)
  *   2. Provide pic32mx_spi2select() and pic32mx_spi2status() functions
  *      in your board-specific logic.  These functions will perform chip selection
  *      and status operations using GPIOs in the way your board is configured.
- *   3. Add a calls to up_spiinitialize() in your low level application
+ *   3. Add a calls to pic32mx_spibus_initialize() in your low level application
  *      initialization logic
- *   4. The handle returned by up_spiinitialize() may then be used to bind the
+ *   4. The handle returned by pic32mx_spibus_initialize() may then be used to bind the
  *      SPI driver to higher level logic (e.g., calling
  *      mmcsd_spislotinitialize(), for example, will bind the SPI driver to
  *      the SPI MMC/SD driver).