@@ -1413,7 +1413,7 @@ svn checkout -r5206 http://svn.code.sf.net/p/nuttx/code/trunk nuttx-code
STMicro STR71x.
Support is provided for the STMicro STR71x family of processors. In particular,
support is provided for the Olimex STR-P711 evaluation board.
- This port also used the GNU arm-elf toolchain* under Linux or Cygwin.
+ This port also used the GNU arm-nuttx-elf toolchain* under Linux or Cygwin.
@@ -1450,7 +1450,7 @@ svn checkout -r5206 http://svn.code.sf.net/p/nuttx/code/trunk nuttx-code
Freescale MC9328MX1 or i.MX1.
- This port uses the Freescale MX1ADS development board with a GNU arm-elf toolchain*
+ This port uses the Freescale MX1ADS development board with a GNU arm-nuttx-elf toolchain*
under either Linux or Cygwin.
@@ -1476,7 +1476,7 @@ svn checkout -r5206 http://svn.code.sf.net/p/nuttx/code/trunk nuttx-code
NuttX operates on the ARM9 of this dual core processor.
This port uses the
Neuros OSD
- with a GNU arm-elf toolchain* under Linux or Cygwin.
+ with a GNU arm-nuttx-elf toolchain* under Linux or Cygwin.
The port was performed using the OSD v1.0, development board.
@@ -1498,7 +1498,7 @@ svn checkout -r5206 http://svn.code.sf.net/p/nuttx/code/trunk nuttx-code
NXP LPC3131.
The port for the NXP LPC3131 on the Embedded Artists EA3131
- development board was first released in NuttX-5.1 with a GNU arm-elf or arm-eabi toolchain* under Linux or Cygwin
+ development board was first released in NuttX-5.1 with a GNU arm-nuttx-elf or arm-eabi toolchain* under Linux or Cygwin
(but was not functional until NuttX-5.2).
@@ -1571,7 +1571,7 @@ svn checkout -r5206 http://svn.code.sf.net/p/nuttx/code/trunk nuttx-code
Luminary/TI Stellaris LM3S6918.
This port uses the Micromint Eagle-100 development
- board with a GNU arm-elf toolchain* under either Linux or Cygwin.
+ board with a GNU arm-nuttx-elf toolchain* under either Linux or Cygwin.
@@ -1601,7 +1601,7 @@ svn checkout -r5206 http://svn.code.sf.net/p/nuttx/code/trunk nuttx-code
Luminary/TI Stellaris LM3S6965.
- This port uses the Stellaris LM3S6965 Ethernet Evalution Kit with a GNU arm-elf toolchain*
+ This port uses the Stellaris LM3S6965 Ethernet Evalution Kit with a GNU arm-nuttx-elf toolchain*
under either Linux or Cygwin.
@@ -1635,7 +1635,7 @@ svn checkout -r5206 http://svn.code.sf.net/p/nuttx/code/trunk nuttx-code
|
Luminary/TI Stellaris LM3S8962.
- This port uses the Stellaris EKC-LM3S8962 Ethernet+CAN Evalution Kit with a GNU arm-elf toolchain*
+ This port uses the Stellaris EKC-LM3S8962 Ethernet+CAN Evalution Kit with a GNU arm-nuttx-elf toolchain*
under either Linux or Cygwin.
Contributed by Larry Arnold.
@@ -1733,7 +1733,7 @@ svn checkout -r5206 http://svn.code.sf.net/p/nuttx/code/trunk nuttx-code
- These ports uses a GNU arm-elf toolchain* under either Linux or Cygwin (with native Windows GNU
+ These ports uses a GNU arm-nuttx-elf toolchain* under either Linux or Cygwin (with native Windows GNU
tools or Cygwin-based GNU tools).
@@ -1842,7 +1842,7 @@ svn checkout -r5206 http://svn.code.sf.net/p/nuttx/code/trunk nuttx-code
Atmel AT91SAM3U.
This port uses the Atmel SAM3U-EK
development board that features the AT91SAM3U4E MCU.
- This port uses a GNU arm-elf or arm-eabi toolchain* under either Linux or Cygwin (with native Windows GNU
+ This port uses a GNU arm-nuttx-elf or arm-eabi toolchain* under either Linux or Cygwin (with native Windows GNU
tools or Cygwin-based GNU tools).
@@ -1905,7 +1905,7 @@ svn checkout -r5206 http://svn.code.sf.net/p/nuttx/code/trunk nuttx-code
The Nucleus 2G board, the mbed board, and the LPCXpresso all feature the NXP LPC1768 MCU;
the Olimex LPC1766-STK board features an LPC1766.
- All use a GNU arm-elf or arm-eabi toolchain* under either Linux or Cygwin (with native Windows GNU tools or Cygwin-based GNU tools).
+ All use a GNU arm-nuttx-elf or arm-eabi toolchain* under either Linux or Cygwin (with native Windows GNU tools or Cygwin-based GNU tools).
@@ -2386,7 +2386,7 @@ svn checkout -r5206 http://svn.code.sf.net/p/nuttx/code/trunk nuttx-code
- Both use a GNU arm-elf toolchain* under Linux or Cygwin.
+ Both use a GNU arm-nuttx-elf toolchain* under Linux or Cygwin.
The NuttX buildroot provides a properly patched GCC 3.4.4 toolchain that is highly optimized for the m9s12x family.
@@ -3583,7 +3583,7 @@ buildroot-1.10 2011-05-06 <gnutt@nuttx.org>
i486 ELF binaries. But that will not work under Cygwin! The Cygwin
toolchain (and probably MinGW), build DOS MZ format executables (i.e.,
.exe files). That is probably not usable for most NuttX targets.
- Instead, you should use this i486-elf-gcc to generate true ELF binaries
+ Instead, you should use this i486-nuttx-elf-gcc to generate true ELF binaries
under Cygwin.
* Makefile - Alter copy arguments to avoid permissions problems when
copying NuttX header files.
diff --git a/Documentation/NuttXLinks.html b/Documentation/NuttXLinks.html
index 7196ea3ea3c..b69a354fade 100644
--- a/Documentation/NuttXLinks.html
+++ b/Documentation/NuttXLinks.html
@@ -22,6 +22,7 @@
- SourceForge
- FreshMeat
- Forum
+ - Ohloh
- OSChina
- Downloads
- Wiki
diff --git a/Documentation/NuttXNxFlat.html b/Documentation/NuttXNxFlat.html
index 6f78fffcd2c..73be5d7b349 100644
--- a/Documentation/NuttXNxFlat.html
+++ b/Documentation/NuttXNxFlat.html
@@ -443,7 +443,7 @@ cat ../syscall/syscall.csv ../lib/lib.csv | sort >tmp.csv
|
|
|
- abc-elf-ld -r -d -warn-common -o $@ $^ |
+ abc-nuttx-elf-ld -r -d -warn-common -o $@ $^ |
| Target 2 |
@@ -464,7 +464,7 @@ cat ../syscall/syscall.csv ../lib/lib.csv | sort >tmp.csv
|
|
- abc-elf-ld -r -d -warn-common -T binfmt/libnxflat/gnu-nxflat.ld -no-check-sections -o $@ hello.o hello-thunk.o
+ abc-nuttx-elf-ld -r -d -warn-common -T binfmt/libnxflat/gnu-nxflat.ld -no-check-sections -o $@ hello.o hello-thunk.o
|
diff --git a/Documentation/NuttXRelated.html b/Documentation/NuttXRelated.html
index 978eb1d4415..9d26a989573 100644
--- a/Documentation/NuttXRelated.html
+++ b/Documentation/NuttXRelated.html
@@ -41,7 +41,7 @@
- Osmocom-BB
- PX4 Autopilot
- RGMP
- - Top Multi-Rotor (TMR)
+ - Top Multi-Rotor (TMR)
diff --git a/Documentation/NuttxPortingGuide.html b/Documentation/NuttxPortingGuide.html
index e13c3be621a..21ae44144de 100644
--- a/Documentation/NuttxPortingGuide.html
+++ b/Documentation/NuttxPortingGuide.html
@@ -768,7 +768,7 @@
This is a port to the Spectrum Digital C5471 evaluation board. The
C5471 is a dual core processor from TI with an ARM7TDMI general purpose
processor and a c54 DSP. It is also known as TMS320DA180 or just DA180.
- NuttX runs on the ARM core and is built with with a GNU arm-elf toolchain
+ NuttX runs on the ARM core and is built with with a GNU arm-nuttx-elf toolchain
under Linux or Cygwin. This port is complete and verified.
@@ -780,14 +780,14 @@
configs/ea3131:
Embedded Artists EA3131 Development bard. This board is based on the
- an NXP LPC3131 MCU. This OS is built with the arm-elf toolchain.
+ an NXP LPC3131 MCU. This OS is built with the arm-nuttx-elf toolchain.
STATUS: This port is complete and mature.
configs/eagle100:
Micromint Eagle-100 Development board. This board is based on the
an ARM Cortex-M3 MCU, the Luminary LM3S6918. This OS is built with the
- arm-elf toolchain. STATUS: This port is complete and mature.
+ arm-nuttx-elf toolchain. STATUS: This port is complete and mature.
configs/ez80f0910200kitg
@@ -805,7 +805,7 @@
configs/lm3s6965-ek:
Stellaris LM3S6965 Evaluation Kit. This board is based on the
an ARM Cortex-M3 MCU, the Luminary/TI LM3S6965. This OS is built with the
- arm-elf toolchain. STATUS: This port is complete and mature.
+ arm-nuttx-elf toolchain. STATUS: This port is complete and mature.
configs/lm3s8962-ek:
@@ -827,13 +827,13 @@
configs/mbed:
The configurations in this directory support the mbed board (http://mbed.org)
that features the NXP LPC1768 microcontroller. This OS is also built
- with the arm-elf toolchain. STATUS: Contributed.
+ with the arm-nuttx-elf toolchain. STATUS: Contributed.
configs/mcu123-lpc214x:
This port is for the NXP LPC2148 as provided on the mcu123.com
lpc214x development board.
- This OS is also built with the arm-elf toolchain* under Linux or Cygwin.
+ This OS is also built with the arm-nuttx-elf toolchain* under Linux or Cygwin.
The port supports serial, timer0, spi, and usb.
configs/ntosd-dm320:
- This port uses the Neuros OSD with a GNU arm-elf toolchain* under Linux or Cygwin.
+ This port uses the Neuros OSD with a GNU arm-nuttx-elf toolchain* under Linux or Cygwin.
See Neuros Wiki
for further information.
NuttX operates on the ARM9EJS of this dual core processor.
@@ -878,12 +878,12 @@
configs/olimex-lpc2378:
- This port uses the Olimex-lpc2378 board and a GNU arm-elf toolchain under
+ This port uses the Olimex-lpc2378 board and a GNU arm-nuttx-elf toolchain under
Linux or Cygwin. STATUS: ostest and NSH configurations available.
configs/olimex-strp711:
- This port uses the Olimex STR-P711 board arm-elf toolchain* under Linux or Cygwin.
+ This port uses the Olimex STR-P711 board arm-nuttx-elf toolchain* under Linux or Cygwin.
See the Olimex web site
for further information.
STATUS: Configurations for the basic OS test and NSH are complete and verified.
diff --git a/Documentation/UsbTrace.html b/Documentation/UsbTrace.html
index ec48e260dd7..e85377756ef 100644
--- a/Documentation/UsbTrace.html
+++ b/Documentation/UsbTrace.html
@@ -1,332 +1,332 @@
-
-
-NuttX USB Trace Capability
-
-
-
-
-
-
-
- NuttX USB Device Trace
- Last Updated: March 20, 2011
- |
-
-
-
-USB Device Tracing Controls.
- The NuttX USB device subsystem supports a fairly sophisticated tracing facility.
- The basic trace cabability is controlled by these NuttX configuration settings:
-
-
- CONFIG_USBDEV_TRACE: Enables USB tracingCONFIG_USBDEV_TRACE_NRECORDS: Number of trace entries to remember
-Trace IDs.
- The trace facility works like this:
- When enabled, USB events that occur in either the USB device driver or in the USB class driver are logged.
- These events are described in include/nuttx/usb/usbdev_trace.h.
- The logged events are identified by a set of event IDs:
-
-
-
- TRACE_INIT_ID |
- Initialization events |
-
-
- TRACE_EP_ID |
- Endpoint API calls |
-
-
- TRACE_DEV_ID |
- USB device API calls |
-
-
- TRACE_CLASS_ID |
- USB class driver API calls |
-
-
- TRACE_CLASSAPI_ID |
- Other class driver system API calls |
-
-
- TRACE_CLASSSTATE_ID |
- Track class driver state changes |
-
-
- TRACE_INTENTRY_ID |
- Interrupt handler entry |
-
-
- TRACE_INTDECODE_ID |
- Decoded interrupt event |
-
-
- TRACE_INTEXIT_ID |
- Interrupt handler exit |
-
-
- TRACE_OUTREQQUEUED_ID |
- Request queued for OUT endpoint |
-
-
- TRACE_INREQQUEUED_ID |
- Request queued for IN endpoint |
-
-
- TRACE_READ_ID |
- Read (OUT) action |
-
-
- TRACE_WRITE_ID |
- Write (IN) action |
-
-
- TRACE_COMPLETE_ID |
- Request completed |
-
-
- TRACE_DEVERROR_ID |
- USB controller driver error event |
-
-
- TRACE_CLSERROR_ID |
- USB class driver error event |
-
-
-Logged Events.
- Each logged event is 32-bits in size and includes
-
-
- - 8-bits of the trace ID (values associated with the above)
- - 8-bits of additional trace ID data, and
- - 16-bits of additonal data.
-
-8-bit Trace Data
- The 8-bit trace data depends on the specific event ID. As examples,
-
-
- -
- For the USB serial and mass storage class, the 8-bit event data is provided in
include/nuttx/usb/usbdev_trace.h.
-
- -
- For the USB device driver, that 8-bit event data is provided within the USB device driver itself.
- So, for example, the 8-bit event data for the LPC1768 USB device driver is found in
arch/arm/src/lpc17xx/lpc17_usbdev.c.
-
-
-16-bit Trace Data.
- The 16-bit trace data provided additional context data relevant to the specific logged event.
-
-Trace Control Interfaces.
- Logging of each of these kinds events can be enabled or disabled using the interfaces described in include/nuttx/usb/usbdev_trace.h.
-
-Enabling USB Device Tracing.
- USB device tracing will be configured if CONFIG_USBDEV and either of the following are set in the NuttX configuration file:
-
-
- CONFIG_USBDEV_TRACE, orCONFIG_DEBUG and CONFIG_DEBUG_USB
-Log Data Sink.
- The logged data itself may go to either (1) an internal circular buffer, or (2) may be provided on the console.
- If CONFIG_USBDEV_TRACE is defined, then the trace data will go to the circular buffer.
- The size of the circular buffer is determined by CONFIG_USBDEV_TRACE_NRECORDS.
- Otherwise, the trace data goes to console.
-
- Example.
- Here is an example of USB trace output using apps/examples/usbserial for an LPC1768 platform with the following NuttX configuration settings:
-
-
- CONFIG_DEBUG, CONFIG_DEBUG_VERBOSE, CONFIG_USB
- CONFIG_EXAMPLES_USBSERIAL_TRACEINIT, CONFIG_EXAMPLES_USBSERIAL_TRACECLASS,
- CONFIG_EXAMPLES_USBSERIAL_TRACETRANSFERS, CONFIG_EXAMPLES_USBSERIAL_TRACECONTROLLER,
- CONFIG_EXAMPLES_USBSERIAL_TRACEINTERRUPTS
-
-Console Output:
-
-
- | |
- ABDE |
-
-
- | |
- usbserial_main: Registering USB serial driver |
-
-
- | |
- uart_register: Registering /dev/ttyUSB0 |
-
-
- | |
- usbserial_main: Successfully registered the serial driver |
-
-
- | 1 |
- Class API call 1: 0000 |
-
-
- | 2 |
- Class error: 19:0000 |
-
-
- | |
- usbserial_main: ERROR: Failed to open /dev/ttyUSB0 for reading: 107 |
-
-
- | |
- usbserial_main: Not connected. Wait and try again. |
-
-
- | 3 |
- Interrupt 1 entry: 0039 |
-
-
- | 4 |
- Interrupt decode 7: 0019 |
-
-
- | 5 |
- Interrupt decode 32: 0019 |
-
-
- | 6 |
- Interrupt decode 6: 0019 |
-
-
- | 7 |
- Class disconnect(): 0000 |
-
-
- | 8 |
- Device pullup(): 0001 |
-
-
- | 9 |
- Interrupt 1 exit: 0000 |
-
-
-
- The numbered items are USB USB trace output.
- You can look in the file drivers/usbdev/usbdev_trprintf.c to see examctly how each output line is formatted.
- Here is how each line should be interpreted:
-
-
-
- In the above example you can see that:
-
-
- - 2.
- An error occurred while processing the setup command because no configuration has yet been selected by the host.
- This corresponds to the following logic in
drivers/usbdev/pl2303.c:
-
-static int pl2303_setup(FAR struct uart_dev_s *dev)
-{
- ...
- /* Check if we have been configured */
-
- if (priv->config == PL2303_CONFIGIDNONE)
- {
- usbtrace(TRACE_CLSERROR(USBSER_TRACEERR_SETUPNOTCONNECTED), 0);
- return -ENOTCONN;
- }
- ...
-
- - 3-6.
- Here is a USB interrupt that suspends and resets the device.
-
- - 7-8.
- During the interrupt processing the serial class is disconnected
-
- - 9.
- And the interrupt returns
-
-
-
-
+
+
+NuttX USB Trace Capability
+
+
+
+
+
+
+
+ NuttX USB Device Trace
+ Last Updated: March 20, 2011
+ |
+
+
+
+USB Device Tracing Controls.
+ The NuttX USB device subsystem supports a fairly sophisticated tracing facility.
+ The basic trace cabability is controlled by these NuttX configuration settings:
+
+
+ CONFIG_USBDEV_TRACE: Enables USB tracingCONFIG_USBDEV_TRACE_NRECORDS: Number of trace entries to remember
+Trace IDs.
+ The trace facility works like this:
+ When enabled, USB events that occur in either the USB device driver or in the USB class driver are logged.
+ These events are described in include/nuttx/usb/usbdev_trace.h.
+ The logged events are identified by a set of event IDs:
+
+
+
+ TRACE_INIT_ID |
+ Initialization events |
+
+
+ TRACE_EP_ID |
+ Endpoint API calls |
+
+
+ TRACE_DEV_ID |
+ USB device API calls |
+
+
+ TRACE_CLASS_ID |
+ USB class driver API calls |
+
+
+ TRACE_CLASSAPI_ID |
+ Other class driver system API calls |
+
+
+ TRACE_CLASSSTATE_ID |
+ Track class driver state changes |
+
+
+ TRACE_INTENTRY_ID |
+ Interrupt handler entry |
+
+
+ TRACE_INTDECODE_ID |
+ Decoded interrupt event |
+
+
+ TRACE_INTEXIT_ID |
+ Interrupt handler exit |
+
+
+ TRACE_OUTREQQUEUED_ID |
+ Request queued for OUT endpoint |
+
+
+ TRACE_INREQQUEUED_ID |
+ Request queued for IN endpoint |
+
+
+ TRACE_READ_ID |
+ Read (OUT) action |
+
+
+ TRACE_WRITE_ID |
+ Write (IN) action |
+
+
+ TRACE_COMPLETE_ID |
+ Request completed |
+
+
+ TRACE_DEVERROR_ID |
+ USB controller driver error event |
+
+
+ TRACE_CLSERROR_ID |
+ USB class driver error event |
+
+
+Logged Events.
+ Each logged event is 32-bits in size and includes
+
+
+ - 8-bits of the trace ID (values associated with the above)
+ - 8-bits of additional trace ID data, and
+ - 16-bits of additonal data.
+
+8-bit Trace Data
+ The 8-bit trace data depends on the specific event ID. As examples,
+
+
+ -
+ For the USB serial and mass storage class, the 8-bit event data is provided in
include/nuttx/usb/usbdev_trace.h.
+
+ -
+ For the USB device driver, that 8-bit event data is provided within the USB device driver itself.
+ So, for example, the 8-bit event data for the LPC1768 USB device driver is found in
arch/arm/src/lpc17xx/lpc17_usbdev.c.
+
+
+16-bit Trace Data.
+ The 16-bit trace data provided additional context data relevant to the specific logged event.
+
+Trace Control Interfaces.
+ Logging of each of these kinds events can be enabled or disabled using the interfaces described in include/nuttx/usb/usbdev_trace.h.
+
+Enabling USB Device Tracing.
+ USB device tracing will be configured if CONFIG_USBDEV and either of the following are set in the NuttX configuration file:
+
+
+ CONFIG_USBDEV_TRACE, orCONFIG_DEBUG and CONFIG_DEBUG_USB
+Log Data Sink.
+ The logged data itself may go to either (1) an internal circular buffer, or (2) may be provided on the console.
+ If CONFIG_USBDEV_TRACE is defined, then the trace data will go to the circular buffer.
+ The size of the circular buffer is determined by CONFIG_USBDEV_TRACE_NRECORDS.
+ Otherwise, the trace data goes to console.
+
+ Example.
+ Here is an example of USB trace output using apps/examples/usbserial for an LPC1768 platform with the following NuttX configuration settings:
+
+
+ CONFIG_DEBUG, CONFIG_DEBUG_VERBOSE, CONFIG_USB
+ CONFIG_EXAMPLES_USBSERIAL_TRACEINIT, CONFIG_EXAMPLES_USBSERIAL_TRACECLASS,
+ CONFIG_EXAMPLES_USBSERIAL_TRACETRANSFERS, CONFIG_EXAMPLES_USBSERIAL_TRACECONTROLLER,
+ CONFIG_EXAMPLES_USBSERIAL_TRACEINTERRUPTS
+
+Console Output:
+
+
+ | |
+ ABDE |
+
+
+ | |
+ usbserial_main: Registering USB serial driver |
+
+
+ | |
+ uart_register: Registering /dev/ttyUSB0 |
+
+
+ | |
+ usbserial_main: Successfully registered the serial driver |
+
+
+ | 1 |
+ Class API call 1: 0000 |
+
+
+ | 2 |
+ Class error: 19:0000 |
+
+
+ | |
+ usbserial_main: ERROR: Failed to open /dev/ttyUSB0 for reading: 107 |
+
+
+ | |
+ usbserial_main: Not connected. Wait and try again. |
+
+
+ | 3 |
+ Interrupt 1 entry: 0039 |
+
+
+ | 4 |
+ Interrupt decode 7: 0019 |
+
+
+ | 5 |
+ Interrupt decode 32: 0019 |
+
+
+ | 6 |
+ Interrupt decode 6: 0019 |
+
+
+ | 7 |
+ Class disconnect(): 0000 |
+
+
+ | 8 |
+ Device pullup(): 0001 |
+
+
+ | 9 |
+ Interrupt 1 exit: 0000 |
+
+
+
+ The numbered items are USB USB trace output.
+ You can look in the file drivers/usbdev/usbdev_trprintf.c to see examctly how each output line is formatted.
+ Here is how each line should be interpreted:
+
+
+
+ In the above example you can see that:
+
+
+
+ - 2.
+ An error occurred while processing the setup command because no configuration has yet been selected by the host.
+ This corresponds to the following logic in
drivers/usbdev/pl2303.c:
+
+static int pl2303_setup(FAR struct uart_dev_s *dev)
+{
+ ...
+ /* Check if we have been configured */
+
+ if (priv->config == PL2303_CONFIGIDNONE)
+ {
+ usbtrace(TRACE_CLSERROR(USBSER_TRACEERR_SETUPNOTCONNECTED), 0);
+ return -ENOTCONN;
+ }
+ ...
+
+ - 3-6.
+ Here is a USB interrupt that suspends and resets the device.
+
+ - 7-8.
+ During the interrupt processing the serial class is disconnected
+
+ - 9.
+ And the interrupt returns
+
+
+
+
diff --git a/configs/Kconfig b/configs/Kconfig
index 752a5b09837..600e74ef445 100644
--- a/configs/Kconfig
+++ b/configs/Kconfig
@@ -42,7 +42,7 @@ config ARCH_BOARD_C5471EVM
This is a port to the Spectrum Digital C5471 evaluation board. The
TMS320C5471 is a dual core processor from TI with an ARM7TDMI general
purpose processor and a c54 DSP. It is also known as TMS320DA180 or just DA180.
- NuttX runs on the ARM core and is built with a GNU arm-elf toolchain*.
+ NuttX runs on the ARM core and is built with a GNU arm-nuttx-elf toolchain*.
This port is complete and verified.
config ARCH_BOARD_COMPALE88
@@ -80,7 +80,7 @@ config ARCH_BOARD_EA3131
select ARCH_HAVE_BUTTONS
---help---
Embedded Artists EA3131 Development board. This board is based on the
- an NXP LPC3131 MCU. This OS is built with the arm-elf toolchain*.
+ an NXP LPC3131 MCU. This OS is built with the arm-nuttx-elf toolchain*.
STATUS: This port is complete and mature.
config ARCH_BOARD_EA3152
@@ -90,7 +90,7 @@ config ARCH_BOARD_EA3152
select ARCH_HAVE_BUTTONS
---help---
Embedded Artists EA3152 Development board. This board is based on the
- an NXP LPC3152 MCU. This OS is built with the arm-elf toolchain*.
+ an NXP LPC3152 MCU. This OS is built with the arm-nuttx-elf toolchain*.
STATUS: This port is has not be exercised well, but since it is
a simple derivative of the ea3131, it should be fully functional.
@@ -101,7 +101,7 @@ config ARCH_BOARD_EAGLE100
---help---
Micromint Eagle-100 Development board. This board is based on the
an ARM Cortex-M3 MCU, the Luminary LM3S6918. This OS is built with the
- arm-elf toolchain*. STATUS: This port is complete and mature.
+ arm-nuttx-elf toolchain*. STATUS: This port is complete and mature.
config ARCH_BOARD_EKK_LM3S9B96
bool "TI/Stellaris EKK-LM3S9B96"
@@ -184,7 +184,7 @@ config ARCH_BOARD_LM3S6965EK
---help---
Stellaris LM3S6965 Evaluation Kit. This board is based on the
an ARM Cortex-M3 MCU, the Luminary/TI LM3S6965. This OS is built with the
- arm-elf toolchain*. STATUS: This port is complete and mature.
+ arm-nuttx-elf toolchain*. STATUS: This port is complete and mature.
config ARCH_BOARD_LM3S8962EK
bool "Stellaris LMS38962 Evaluation Kit"
@@ -215,7 +215,7 @@ config ARCH_BOARD_M68332EVB
depends on ARCH_M68332
---help---
This is a work in progress for the venerable m68322evb board from
- Motorola. This OS is also built with the arm-elf toolchain. STATUS:
+ Motorola. This OS is also built with the arm-nuttx-elf toolchain. STATUS:
This port was never completed.
config ARCH_BOARD_MBED
@@ -225,7 +225,7 @@ config ARCH_BOARD_MBED
---help---
The configurations in this directory support the mbed board (http://mbed.org)
that features the NXP LPC1768 microcontroller. This OS is also built
- with the arm-elf toolchain*. STATUS: Contributed.
+ with the arm-nuttx-elf toolchain*. STATUS: Contributed.
config ARCH_BOARD_MCU123
bool "mcu123.com LPC2148 Development Board"
@@ -233,7 +233,7 @@ config ARCH_BOARD_MCU123
select ARCH_HAVE_LEDS
---help---
This port is for the NXP LPC2148 as provided on the mcu123.com
- lpc214x development board. This OS is also built with the arm-elf
+ lpc214x development board. This OS is also built with the arm-nuttx-elf
toolchain*. The port supports serial, timer0, spi, and usb.
config ARCH_BOARD_MICROPENDOUS3
@@ -270,7 +270,7 @@ config ARCH_BOARD_NTOSD_DM320
depends on ARCH_CHIP_DM320
select ARCH_HAVE_LEDS
---help---
- This port uses the Neuros OSD v1.0 Dev Board with a GNU arm-elf
+ This port uses the Neuros OSD v1.0 Dev Board with a GNU arm-nuttx-elf
toolchain*: see
http://wiki.neurostechnology.com/index.php/OSD_1.0_Developer_Home
@@ -316,7 +316,7 @@ config ARCH_BOARD_OLIMEXLPC2378
depends on ARCH_CHIP_LPC2378
select ARCH_HAVE_LEDS
---help---
- This port uses the Olimex-lpc2378 board and a GNU arm-elf toolchain* under
+ This port uses the Olimex-lpc2378 board and a GNU arm-nuttx-elf toolchain* under
Linux or Cygwin. STATUS: ostest and NSH configurations available.
This port for the NXP LPC2378 was contributed by Rommel Marcelo.
@@ -326,7 +326,7 @@ config ARCH_BOARD_OLIMEX_STRP711
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
---help---
- This port uses the Olimex STR-P711 board and a GNU arm-elf toolchain* under
+ This port uses the Olimex STR-P711 board and a GNU arm-nuttx-elf toolchain* under
Linux or Cygwin. See the http://www.olimex.com/dev/str-p711.html" for
further information. STATUS: Configurations for the basic OS test and NSH
are complete and verified.
@@ -335,7 +335,7 @@ config ARCH_BOARD_OLIMEX_STM32P107
bool "Olimex STM32 P107 board"
depends on ARCH_CHIP_STM32F107VC
---help---
- This port uses the Olimex STM32 P107 board and a GNU arm-elf toolchain* under
+ This port uses the Olimex STM32 P107 board and a GNU arm-nuttx-elf toolchain* under
Linux or Cygwin. See the http://www.olimex.com for further information. This
board features the STMicro STM32F107VC MCU
@@ -411,7 +411,7 @@ config ARCH_BOARD_SHENZHOU
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
- This port uses the Shenzhou STM32 F107 board and a GNU arm-elf toolchain* under
+ This port uses the Shenzhou STM32 F107 board and a GNU arm-nuttx-elf toolchain* under
Linux or Cygwin. See the http://www.armjishu.com for further information. This
board features the STMicro STM32F107VC MCU
diff --git a/configs/README.txt b/configs/README.txt
index 5bbec874f79..e6bde645d16 100644
--- a/configs/README.txt
+++ b/configs/README.txt
@@ -1524,7 +1524,7 @@ configs/c5471evm
This is a port to the Spectrum Digital C5471 evaluation board. The
TMS320C5471 is a dual core processor from TI with an ARM7TDMI general
purpose processor and a c54 DSP. It is also known as TMS320DA180 or just DA180.
- NuttX runs on the ARM core and is built with a GNU arm-elf toolchain*.
+ NuttX runs on the ARM core and is built with a GNU arm-nuttx-elf toolchain*.
This port is complete and verified.
configs/compal_e88 and compal_e99
@@ -1540,19 +1540,19 @@ configs/demo9s12ne64
configs/ea3131
Embedded Artists EA3131 Development board. This board is based on the
- an NXP LPC3131 MCU. This OS is built with the arm-elf toolchain*.
+ an NXP LPC3131 MCU. This OS is built with the arm-nuttx-elf toolchain*.
STATUS: This port is complete and mature.
configs/ea3152
Embedded Artists EA3152 Development board. This board is based on the
- an NXP LPC3152 MCU. This OS is built with the arm-elf toolchain*.
+ an NXP LPC3152 MCU. This OS is built with the arm-nuttx-elf toolchain*.
STATUS: This port is has not be exercised well, but since it is
a simple derivative of the ea3131, it should be fully functional.
configs/eagle100
Micromint Eagle-100 Development board. This board is based on the
an ARM Cortex-M3 MCU, the Luminary LM3S6918. This OS is built with the
- arm-elf toolchain*. STATUS: This port is complete and mature.
+ arm-nuttx-elf toolchain*. STATUS: This port is complete and mature.
configs/ekk-lm3s9b96
TI/Stellaris EKK-LM3S9B96 board. This board is based on the
@@ -1591,7 +1591,7 @@ configs/lm3s6432-s2e
configs/lm3s6965-ek
Stellaris LM3S6965 Evaluation Kit. This board is based on the
an ARM Cortex-M3 MCU, the Luminary/TI LM3S6965. This OS is built with the
- arm-elf toolchain*. STATUS: This port is complete and mature.
+ arm-nuttx-elf toolchain*. STATUS: This port is complete and mature.
configs/lm3s8962-ek
Stellaris LMS38962 Evaluation Kit.
@@ -1607,17 +1607,17 @@ configs/lpc4330-xplorer
configs/m68322evb
This is a work in progress for the venerable m68322evb board from
- Motorola. This OS is also built with the arm-elf toolchain*. STATUS:
+ Motorola. This OS is also built with the arm-nuttx-elf toolchain*. STATUS:
This port was never completed.
configs/mbed
The configurations in this directory support the mbed board (http://mbed.org)
that features the NXP LPC1768 microcontroller. This OS is also built
- with the arm-elf toolchain*. STATUS: Contributed.
+ with the arm-nuttx-elf toolchain*. STATUS: Contributed.
configs/mcu123-lpc214x
This port is for the NXP LPC2148 as provided on the mcu123.com
- lpc214x development board. This OS is also built with the arm-elf
+ lpc214x development board. This OS is also built with the arm-nuttx-elf
toolchain*. The port supports serial, timer0, spi, and usb.
configs/micropendous3
@@ -1642,7 +1642,7 @@ configs/ne64badge
not yet been fully tested.
configs/ntosd-dm320
- This port uses the Neuros OSD v1.0 Dev Board with a GNU arm-elf
+ This port uses the Neuros OSD v1.0 Dev Board with a GNU arm-nuttx-elf
toolchain*: see
http://wiki.neurostechnology.com/index.php/OSD_1.0_Developer_Home
@@ -1666,18 +1666,18 @@ configs/olimex-lpc1766stk
Linux or Cygwin. STATUS: Complete and mature.
configs/olimex-lpc2378
- This port uses the Olimex-lpc2378 board and a GNU arm-elf toolchain* under
+ This port uses the Olimex-lpc2378 board and a GNU arm-nuttx-elf toolchain* under
Linux or Cygwin. STATUS: ostest and NSH configurations available.
This port for the NXP LPC2378 was contributed by Rommel Marcelo.
configs/olimex-stm32-p107
- This port uses the Olimex STM32-P107 board (STM32F107VC) and a GNU arm-elf
+ This port uses the Olimex STM32-P107 board (STM32F107VC) and a GNU arm-nuttx-elf
toolchain* under Linux or Cygwin. See the https://www.olimex.com/dev/stm32-p107.html
for further information. Contributed by Max Holtzberg. STATUS: Configurations
for the basic OS test and NSH are available and verified.
configs/olimex-strp711
- This port uses the Olimex STR-P711 board and a GNU arm-elf toolchain* under
+ This port uses the Olimex STR-P711 board and a GNU arm-nuttx-elf toolchain* under
Linux or Cygwin. See the http://www.olimex.com/dev/str-p711.html" for
further information. STATUS: Configurations for the basic OS test and NSH
are complete and verified.
diff --git a/configs/amber/hello/Make.defs b/configs/amber/hello/Make.defs
index 4474e1621db..66f3ff79935 100644
--- a/configs/amber/hello/Make.defs
+++ b/configs/amber/hello/Make.defs
@@ -57,7 +57,7 @@ endif
ifeq ($(CONFIG_AVR_BUILDROOT),y)
# NuttX buildroot GCC toolchain under Linux or Cygwin
- CROSSDEV = avr-elf-
+ CROSSDEV = avr-nuttx-elf-
MAXOPTIMIZATION = -O2
ARCHCPUFLAGS = -mmcu=atmega128
LDFLAGS += -nostartfiles -nodefaultlibs
diff --git a/configs/c5471evm/httpd/Make.defs b/configs/c5471evm/httpd/Make.defs
index 6ff007708fe..ffc267530df 100644
--- a/configs/c5471evm/httpd/Make.defs
+++ b/configs/c5471evm/httpd/Make.defs
@@ -36,7 +36,7 @@
include ${TOPDIR}/.config
include ${TOPDIR}/tools/Config.mk
-CROSSDEV = arm-elf-
+CROSSDEV = arm-nuttx-elf-
CC = $(CROSSDEV)gcc
CPP = $(CROSSDEV)gcc -E
LD = $(CROSSDEV)ld
diff --git a/configs/c5471evm/nettest/Make.defs b/configs/c5471evm/nettest/Make.defs
index d66bb564fb3..e784c11194d 100644
--- a/configs/c5471evm/nettest/Make.defs
+++ b/configs/c5471evm/nettest/Make.defs
@@ -36,7 +36,7 @@
include ${TOPDIR}/.config
include ${TOPDIR}/tools/Config.mk
-CROSSDEV = arm-elf-
+CROSSDEV = arm-nuttx-elf-
CC = $(CROSSDEV)gcc
CPP = $(CROSSDEV)gcc -E
LD = $(CROSSDEV)ld
diff --git a/configs/c5471evm/nsh/Make.defs b/configs/c5471evm/nsh/Make.defs
index 2ffb69ffd30..d9e569158b2 100644
--- a/configs/c5471evm/nsh/Make.defs
+++ b/configs/c5471evm/nsh/Make.defs
@@ -36,7 +36,7 @@
include ${TOPDIR}/.config
include ${TOPDIR}/tools/Config.mk
-CROSSDEV = arm-elf-
+CROSSDEV = arm-nuttx-elf-
CC = $(CROSSDEV)gcc
CPP = $(CROSSDEV)gcc -E
LD = $(CROSSDEV)ld
diff --git a/configs/c5471evm/ostest/Make.defs b/configs/c5471evm/ostest/Make.defs
index 04d6e097139..9cbfc1d1d5f 100644
--- a/configs/c5471evm/ostest/Make.defs
+++ b/configs/c5471evm/ostest/Make.defs
@@ -36,7 +36,7 @@
include ${TOPDIR}/.config
include ${TOPDIR}/tools/Config.mk
-CROSSDEV = arm-elf-
+CROSSDEV = arm-nuttx-elf-
CC = $(CROSSDEV)gcc
CPP = $(CROSSDEV)gcc -E
LD = $(CROSSDEV)ld
diff --git a/configs/compal_e88/nsh_highram/Make.defs b/configs/compal_e88/nsh_highram/Make.defs
index b3c04930dbe..e99d5635d02 100644
--- a/configs/compal_e88/nsh_highram/Make.defs
+++ b/configs/compal_e88/nsh_highram/Make.defs
@@ -45,7 +45,7 @@ EXTRA_LIBS = $(OSMODIR)/src/target/firmware/comm/libcomm.a \
# ^^^ Stupid hack! Why do I have to put it twice???
endif
-CROSSDEV = arm-elf-
+CROSSDEV = arm-nuttx-elf-
CC = $(CROSSDEV)gcc
CPP = $(CROSSDEV)gcc -E
LD = $(CROSSDEV)ld
diff --git a/configs/compal_e99/nsh_compalram/Make.defs b/configs/compal_e99/nsh_compalram/Make.defs
index cec8bdd1fbc..4759fc76a4c 100644
--- a/configs/compal_e99/nsh_compalram/Make.defs
+++ b/configs/compal_e99/nsh_compalram/Make.defs
@@ -45,7 +45,7 @@ EXTRA_LIBS = $(OSMODIR)/src/target/firmware/comm/libcomm.a \
# ^^^ Stupid hack! Why do I have to put it twice???
endif
-CROSSDEV = arm-elf-
+CROSSDEV = arm-nuttx-elf-
CC = $(CROSSDEV)gcc
CPP = $(CROSSDEV)gcc -E
LD = $(CROSSDEV)ld
diff --git a/configs/compal_e99/nsh_highram/Make.defs b/configs/compal_e99/nsh_highram/Make.defs
index b3c04930dbe..e99d5635d02 100644
--- a/configs/compal_e99/nsh_highram/Make.defs
+++ b/configs/compal_e99/nsh_highram/Make.defs
@@ -45,7 +45,7 @@ EXTRA_LIBS = $(OSMODIR)/src/target/firmware/comm/libcomm.a \
# ^^^ Stupid hack! Why do I have to put it twice???
endif
-CROSSDEV = arm-elf-
+CROSSDEV = arm-nuttx-elf-
CC = $(CROSSDEV)gcc
CPP = $(CROSSDEV)gcc -E
LD = $(CROSSDEV)ld
diff --git a/configs/demo9s12ne64/ostest/Make.defs b/configs/demo9s12ne64/ostest/Make.defs
index 9ad5036c3f5..727ebb5614f 100644
--- a/configs/demo9s12ne64/ostest/Make.defs
+++ b/configs/demo9s12ne64/ostest/Make.defs
@@ -39,7 +39,7 @@ include ${TOPDIR}/tools/Config.mk
# Setup for the selected toolchain
# NuttX buildroot under Linux or Cygwin
-CROSSDEV = m9s12x-elf-
+CROSSDEV = m9s12x-nuttx-elf-
MAXOPTIMIZATION = -Os
WINTOOL = n
diff --git a/configs/ea3131/README.txt b/configs/ea3131/README.txt
index c237345d149..a99011ec5b2 100644
--- a/configs/ea3131/README.txt
+++ b/configs/ea3131/README.txt
@@ -265,7 +265,7 @@ Using OpenOCD and GDB
Once the OpenOCD daemon has been started, you can connect to it via
GDB using the following GDB command:
- arm-elf-gdb
+ arm-nuttx-elf-gdb
(gdb) target remote localhost:3333
And you can load the NuttX ELF file:
diff --git a/configs/ea3131/nsh/Make.defs b/configs/ea3131/nsh/Make.defs
index 9ef28c3636b..cd49f56af7a 100644
--- a/configs/ea3131/nsh/Make.defs
+++ b/configs/ea3131/nsh/Make.defs
@@ -56,7 +56,7 @@ ifeq ($(CONFIG_LPC31_DEVKITARM),y)
endif
ifeq ($(CONFIG_LPC31_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
- CROSSDEV = arm-elf-
+ CROSSDEV = arm-nuttx-elf-
MAXOPTIMIZATION = -Os
endif
diff --git a/configs/ea3131/ostest/Make.defs b/configs/ea3131/ostest/Make.defs
index 3528b80b5d5..f07f4d45296 100644
--- a/configs/ea3131/ostest/Make.defs
+++ b/configs/ea3131/ostest/Make.defs
@@ -56,7 +56,7 @@ ifeq ($(CONFIG_LPC31_DEVKITARM),y)
endif
ifeq ($(CONFIG_LPC31_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
- CROSSDEV = arm-elf-
+ CROSSDEV = arm-nuttx-elf-
MAXOPTIMIZATION = -Os
endif
diff --git a/configs/ea3131/pgnsh/Make.defs b/configs/ea3131/pgnsh/Make.defs
index 7dace9854a1..1097a8d728b 100644
--- a/configs/ea3131/pgnsh/Make.defs
+++ b/configs/ea3131/pgnsh/Make.defs
@@ -56,7 +56,7 @@ ifeq ($(CONFIG_LPC31_DEVKITARM),y)
endif
ifeq ($(CONFIG_LPC31_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
- CROSSDEV = arm-elf-
+ CROSSDEV = arm-nuttx-elf-
MAXOPTIMIZATION = -Os
endif
diff --git a/configs/ea3131/usbserial/Make.defs b/configs/ea3131/usbserial/Make.defs
index eb0da53f55f..3fe5f8f931f 100644
--- a/configs/ea3131/usbserial/Make.defs
+++ b/configs/ea3131/usbserial/Make.defs
@@ -56,7 +56,7 @@ ifeq ($(CONFIG_LPC31_DEVKITARM),y)
endif
ifeq ($(CONFIG_LPC31_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
- CROSSDEV = arm-elf-
+ CROSSDEV = arm-nuttx-elf-
MAXOPTIMIZATION = -Os
endif
diff --git a/configs/ea3131/usbstorage/Make.defs b/configs/ea3131/usbstorage/Make.defs
index fc679e24cad..de351b2567e 100644
--- a/configs/ea3131/usbstorage/Make.defs
+++ b/configs/ea3131/usbstorage/Make.defs
@@ -56,7 +56,7 @@ ifeq ($(CONFIG_LPC31_DEVKITARM),y)
endif
ifeq ($(CONFIG_LPC31_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
- CROSSDEV = arm-elf-
+ CROSSDEV = arm-nuttx-elf-
MAXOPTIMIZATION = -Os
endif
diff --git a/configs/ea3152/README.txt b/configs/ea3152/README.txt
index 90be2a2201d..5b6eb17a934 100644
--- a/configs/ea3152/README.txt
+++ b/configs/ea3152/README.txt
@@ -264,7 +264,7 @@ Using OpenOCD and GDB
Once the OpenOCD daemon has been started, you can connect to it via
GDB using the following GDB command:
- arm-elf-gdb
+ arm-nuttx-elf-gdb
(gdb) target remote localhost:3333
And you can load the NuttX ELF file:
diff --git a/configs/ea3152/ostest/Make.defs b/configs/ea3152/ostest/Make.defs
index 8872b60e41c..9bb350e36c0 100644
--- a/configs/ea3152/ostest/Make.defs
+++ b/configs/ea3152/ostest/Make.defs
@@ -56,7 +56,7 @@ ifeq ($(CONFIG_LPC31_DEVKITARM),y)
endif
ifeq ($(CONFIG_LPC31_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
- CROSSDEV = arm-elf-
+ CROSSDEV = arm-nuttx-elf-
MAXOPTIMIZATION = -Os
endif
diff --git a/configs/eagle100/README.txt b/configs/eagle100/README.txt
index e03a92d5c68..47c4f89df03 100644
--- a/configs/eagle100/README.txt
+++ b/configs/eagle100/README.txt
@@ -36,7 +36,7 @@ GNU Toolchain Options
make # Will build for the devkitARM toolchain
make CROSSDEV=arm-eabi- # Will build for the devkitARM toolchain
make CROSSDEV=arm-none-eabi- # Will build for the CodeSourcery toolchain
- make CROSSDEV=arm-elf- # Will build for the NuttX buildroot toolchain
+ make CROSSDEV=arm-nuttx-elf- # Will build for the NuttX buildroot toolchain
Of course, hard coding this CROSS_COMPILE value in Make.defs file will save
some repetitive typing.
diff --git a/configs/eagle100/httpd/Make.defs b/configs/eagle100/httpd/Make.defs
index 1b6dc01cf06..8d3cc9c25fe 100644
--- a/configs/eagle100/httpd/Make.defs
+++ b/configs/eagle100/httpd/Make.defs
@@ -40,7 +40,7 @@ include ${TOPDIR}/tools/Config.mk
# make -- Will build for the devkitARM toolchain
# make CROSSDEV=arm-eabi- -- Will build for the devkitARM toolchain
# make CROSSDEV=arm-none-eabi- -- Will build for the CodeSourcery toolchain
-# make CROSSDEV=arm-elf- -- Will build for the NuttX buildroot toolchain
+# make CROSSDEV=arm-nuttx-elf- -- Will build for the NuttX buildroot toolchain
CROSSDEV = arm-eabi-
CC = $(CROSSDEV)gcc
@@ -55,7 +55,7 @@ OBJDUMP = $(CROSSDEV)objdump
ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'}
ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1}
-ifeq ($(CROSSDEV),arm-elf-)
+ifeq ($(CROSSDEV),arm-nuttx-elf-)
MKDEP = $(TOPDIR)/tools/mkdeps.sh
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
@@ -106,7 +106,7 @@ OBJEXT = .o
LIBEXT = .a
EXEEXT =
-ifneq ($(CROSSDEV),arm-elf-)
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
diff --git a/configs/eagle100/nettest/Make.defs b/configs/eagle100/nettest/Make.defs
index ef761182f3a..ca504928285 100644
--- a/configs/eagle100/nettest/Make.defs
+++ b/configs/eagle100/nettest/Make.defs
@@ -40,7 +40,7 @@ include ${TOPDIR}/tools/Config.mk
# make -- Will build for the devkitARM toolchain
# make CROSSDEV=arm-eabi- -- Will build for the devkitARM toolchain
# make CROSSDEV=arm-none-eabi- -- Will build for the CodeSourcery toolchain
-# make CROSSDEV=arm-elf- -- Will build for the NuttX buildroot toolchain
+# make CROSSDEV=arm-nuttx-elf- -- Will build for the NuttX buildroot toolchain
CROSSDEV = arm-eabi-
CC = $(CROSSDEV)gcc
@@ -55,7 +55,7 @@ OBJDUMP = $(CROSSDEV)objdump
ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'}
ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1}
-ifeq ($(CROSSDEV),arm-elf-)
+ifeq ($(CROSSDEV),arm-nuttx-elf-)
MKDEP = $(TOPDIR)/tools/mkdeps.sh
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
@@ -106,7 +106,7 @@ OBJEXT = .o
LIBEXT = .a
EXEEXT =
-ifneq ($(CROSSDEV),arm-elf-)
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
diff --git a/configs/eagle100/nsh/Make.defs b/configs/eagle100/nsh/Make.defs
index 4f024e26369..4992994951b 100644
--- a/configs/eagle100/nsh/Make.defs
+++ b/configs/eagle100/nsh/Make.defs
@@ -40,7 +40,7 @@ include ${TOPDIR}/tools/Config.mk
# make -- Will build for the devkitARM toolchain
# make CROSSDEV=arm-eabi- -- Will build for the devkitARM toolchain
# make CROSSDEV=arm-none-eabi- -- Will build for the CodeSourcery toolchain
-# make CROSSDEV=arm-elf- -- Will build for the NuttX buildroot toolchain
+# make CROSSDEV=arm-nuttx-elf- -- Will build for the NuttX buildroot toolchain
CROSSDEV = arm-eabi-
CC = $(CROSSDEV)gcc
@@ -55,7 +55,7 @@ OBJDUMP = $(CROSSDEV)objdump
ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'}
ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1}
-ifeq ($(CROSSDEV),arm-elf-)
+ifeq ($(CROSSDEV),arm-nuttx-elf-)
MKDEP = $(TOPDIR)/tools/mkdeps.sh
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
@@ -106,7 +106,7 @@ OBJEXT = .o
LIBEXT = .a
EXEEXT =
-ifneq ($(CROSSDEV),arm-elf-)
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
diff --git a/configs/eagle100/nxflat/Make.defs b/configs/eagle100/nxflat/Make.defs
index d3107f1126e..d735c3942a8 100644
--- a/configs/eagle100/nxflat/Make.defs
+++ b/configs/eagle100/nxflat/Make.defs
@@ -40,7 +40,7 @@ include ${TOPDIR}/tools/Config.mk
# make -- Will build for the devkitARM toolchain
# make CROSSDEV=arm-eabi- -- Will build for the devkitARM toolchain
# make CROSSDEV=arm-none-eabi- -- Will build for the CodeSourcery toolchain
-# make CROSSDEV=arm-elf- -- Will build for the NuttX buildroot toolchain
+# make CROSSDEV=arm-nuttx-elf- -- Will build for the NuttX buildroot toolchain
CROSSDEV = arm-eabi-
CC = $(CROSSDEV)gcc
@@ -58,7 +58,7 @@ LDNXFLAT = ldnxflat
ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'}
ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1}
-ifeq ($(CROSSDEV),arm-elf-)
+ifeq ($(CROSSDEV),arm-nuttx-elf-)
MKDEP = $(TOPDIR)/tools/mkdeps.sh
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
@@ -109,7 +109,7 @@ OBJEXT = .o
LIBEXT = .a
EXEEXT =
-ifneq ($(CROSSDEV),arm-elf-)
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
diff --git a/configs/eagle100/ostest/Make.defs b/configs/eagle100/ostest/Make.defs
index 7dd98c21af7..641fcbaba2d 100644
--- a/configs/eagle100/ostest/Make.defs
+++ b/configs/eagle100/ostest/Make.defs
@@ -40,7 +40,7 @@ include ${TOPDIR}/tools/Config.mk
# make -- Will build for the devkitARM toolchain
# make CROSSDEV=arm-eabi- -- Will build for the devkitARM toolchain
# make CROSSDEV=arm-none-eabi- -- Will build for the CodeSourcery toolchain
-# make CROSSDEV=arm-elf- -- Will build for the NuttX buildroot toolchain
+# make CROSSDEV=arm-nuttx-elf- -- Will build for the NuttX buildroot toolchain
CROSSDEV = arm-eabi-
CC = $(CROSSDEV)gcc
@@ -55,7 +55,7 @@ OBJDUMP = $(CROSSDEV)objdump
ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'}
ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1}
-ifeq ($(CROSSDEV),arm-elf-)
+ifeq ($(CROSSDEV),arm-nuttx-elf-)
MKDEP = $(TOPDIR)/tools/mkdeps.sh
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
@@ -106,7 +106,7 @@ OBJEXT = .o
LIBEXT = .a
EXEEXT =
-ifneq ($(CROSSDEV),arm-elf-)
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
diff --git a/configs/eagle100/thttpd/Make.defs b/configs/eagle100/thttpd/Make.defs
index a864867e724..999db3a591a 100644
--- a/configs/eagle100/thttpd/Make.defs
+++ b/configs/eagle100/thttpd/Make.defs
@@ -40,7 +40,7 @@ include ${TOPDIR}/tools/Config.mk
# make -- Will build for the devkitARM toolchain
# make CROSSDEV=arm-eabi- -- Will build for the devkitARM toolchain
# make CROSSDEV=arm-none-eabi- -- Will build for the CodeSourcery toolchain
-# make CROSSDEV=arm-elf- -- Will build for the NuttX buildroot toolchain
+# make CROSSDEV=arm-nuttx-elf- -- Will build for the NuttX buildroot toolchain
CROSSDEV = arm-eabi-
CC = $(CROSSDEV)gcc
@@ -58,7 +58,7 @@ LDNXFLAT = ldnxflat
ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'}
ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1}
-ifeq ($(CROSSDEV),arm-elf-)
+ifeq ($(CROSSDEV),arm-nuttx-elf-)
MKDEP = $(TOPDIR)/tools/mkdeps.sh
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
@@ -109,7 +109,7 @@ OBJEXT = .o
LIBEXT = .a
EXEEXT =
-ifneq ($(CROSSDEV),arm-elf-)
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
diff --git a/configs/ekk-lm3s9b96/nsh/Make.defs b/configs/ekk-lm3s9b96/nsh/Make.defs
index a4223e51371..1be7fc8f0b6 100644
--- a/configs/ekk-lm3s9b96/nsh/Make.defs
+++ b/configs/ekk-lm3s9b96/nsh/Make.defs
@@ -59,7 +59,7 @@ ifeq ($(CONFIG_LM3S_DEVKITARM),y)
endif
ifeq ($(CONFIG_LM3S_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
- CROSSDEV = arm-elf-
+ CROSSDEV = arm-nuttx-elf-
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
MAXOPTIMIZATION = -Os
endif
@@ -121,7 +121,7 @@ OBJEXT = .o
LIBEXT = .a
EXEEXT =
-ifneq ($(CROSSDEV),arm-elf-)
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
diff --git a/configs/ekk-lm3s9b96/ostest/Make.defs b/configs/ekk-lm3s9b96/ostest/Make.defs
index 2da0c421a6e..e0fae20f0f8 100644
--- a/configs/ekk-lm3s9b96/ostest/Make.defs
+++ b/configs/ekk-lm3s9b96/ostest/Make.defs
@@ -59,7 +59,7 @@ ifeq ($(CONFIG_LM3S_DEVKITARM),y)
endif
ifeq ($(CONFIG_LM3S_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
- CROSSDEV = arm-elf-
+ CROSSDEV = arm-nuttx-elf-
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
MAXOPTIMIZATION = -Os
endif
@@ -121,7 +121,7 @@ OBJEXT = .o
LIBEXT = .a
EXEEXT =
-ifneq ($(CROSSDEV),arm-elf-)
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
diff --git a/configs/fire-stm32v2/nsh/Make.defs b/configs/fire-stm32v2/nsh/Make.defs
index 567e8206397..aaf0e8980c0 100644
--- a/configs/fire-stm32v2/nsh/Make.defs
+++ b/configs/fire-stm32v2/nsh/Make.defs
@@ -82,8 +82,8 @@ ifeq ($(CONFIG_STM32_RAISONANCE),y)
endif
ifeq ($(CONFIG_STM32_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
- CROSSDEV = arm-elf-
- ARCROSSDEV = arm-elf-
+ CROSSDEV = arm-nuttx-elf-
+ ARCROSSDEV = arm-nuttx-elf-
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
MAXOPTIMIZATION = -Os
endif
@@ -153,7 +153,7 @@ OBJEXT = .o
LIBEXT = .a
EXEEXT =
-ifneq ($(CROSSDEV),arm-elf-)
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
diff --git a/configs/hymini-stm32v/buttons/Make.defs b/configs/hymini-stm32v/buttons/Make.defs
index f78c3aed355..bcc1f6845f7 100644
--- a/configs/hymini-stm32v/buttons/Make.defs
+++ b/configs/hymini-stm32v/buttons/Make.defs
@@ -70,7 +70,7 @@ ifeq ($(CONFIG_STM32_RAISONANCE),y)
endif
ifeq ($(CONFIG_STM32_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
- CROSSDEV = arm-elf-
+ CROSSDEV = arm-nuttx-elf-
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
MAXOPTIMIZATION = -Os
endif
@@ -132,7 +132,7 @@ OBJEXT = .o
LIBEXT = .a
EXEEXT =
-ifneq ($(CROSSDEV),arm-elf-)
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
diff --git a/configs/hymini-stm32v/nsh/Make.defs b/configs/hymini-stm32v/nsh/Make.defs
index 91aa0638357..fae6edc080f 100644
--- a/configs/hymini-stm32v/nsh/Make.defs
+++ b/configs/hymini-stm32v/nsh/Make.defs
@@ -70,7 +70,7 @@ ifeq ($(CONFIG_STM32_RAISONANCE),y)
endif
ifeq ($(CONFIG_STM32_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
- CROSSDEV = arm-elf-
+ CROSSDEV = arm-nuttx-elf-
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
MAXOPTIMIZATION = -Os
endif
@@ -132,7 +132,7 @@ OBJEXT = .o
LIBEXT = .a
EXEEXT =
-ifneq ($(CROSSDEV),arm-elf-)
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
diff --git a/configs/hymini-stm32v/nsh2/Make.defs b/configs/hymini-stm32v/nsh2/Make.defs
index f5c9d11c693..1cf89238ea9 100644
--- a/configs/hymini-stm32v/nsh2/Make.defs
+++ b/configs/hymini-stm32v/nsh2/Make.defs
@@ -70,7 +70,7 @@ ifeq ($(CONFIG_STM32_RAISONANCE),y)
endif
ifeq ($(CONFIG_STM32_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
- CROSSDEV = arm-elf-
+ CROSSDEV = arm-nuttx-elf-
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
MAXOPTIMIZATION = -Os
endif
@@ -132,7 +132,7 @@ OBJEXT = .o
LIBEXT = .a
EXEEXT =
-ifneq ($(CROSSDEV),arm-elf-)
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
diff --git a/configs/hymini-stm32v/nx/Make.defs b/configs/hymini-stm32v/nx/Make.defs
index ac140b35430..8ebded09446 100644
--- a/configs/hymini-stm32v/nx/Make.defs
+++ b/configs/hymini-stm32v/nx/Make.defs
@@ -70,7 +70,7 @@ ifeq ($(CONFIG_STM32_RAISONANCE),y)
endif
ifeq ($(CONFIG_STM32_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
- CROSSDEV = arm-elf-
+ CROSSDEV = arm-nuttx-elf-
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
MAXOPTIMIZATION = -Os
endif
@@ -132,7 +132,7 @@ OBJEXT = .o
LIBEXT = .a
EXEEXT =
-ifneq ($(CROSSDEV),arm-elf-)
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
diff --git a/configs/hymini-stm32v/nxlines/Make.defs b/configs/hymini-stm32v/nxlines/Make.defs
index 897af1fcd8d..15521d6212b 100644
--- a/configs/hymini-stm32v/nxlines/Make.defs
+++ b/configs/hymini-stm32v/nxlines/Make.defs
@@ -73,7 +73,7 @@ ifeq ($(CONFIG_STM32_RAISONANCE),y)
endif
ifeq ($(CONFIG_STM32_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
- CROSSDEV = arm-elf-
+ CROSSDEV = arm-nuttx-elf-
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
MAXOPTIMIZATION = -Os
endif
@@ -134,7 +134,7 @@ OBJEXT = .o
LIBEXT = .a
EXEEXT =
-ifneq ($(CROSSDEV),arm-elf-)
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
diff --git a/configs/hymini-stm32v/usbserial/Make.defs b/configs/hymini-stm32v/usbserial/Make.defs
index 29be9190fec..b58c4c1fe1e 100644
--- a/configs/hymini-stm32v/usbserial/Make.defs
+++ b/configs/hymini-stm32v/usbserial/Make.defs
@@ -70,7 +70,7 @@ ifeq ($(CONFIG_STM32_RAISONANCE),y)
endif
ifeq ($(CONFIG_STM32_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
- CROSSDEV = arm-elf-
+ CROSSDEV = arm-nuttx-elf-
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
MAXOPTIMIZATION = -Os
endif
@@ -132,7 +132,7 @@ OBJEXT = .o
LIBEXT = .a
EXEEXT =
-ifneq ($(CROSSDEV),arm-elf-)
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
diff --git a/configs/hymini-stm32v/usbstorage/Make.defs b/configs/hymini-stm32v/usbstorage/Make.defs
index 3e89daa6d27..f3264ab9370 100644
--- a/configs/hymini-stm32v/usbstorage/Make.defs
+++ b/configs/hymini-stm32v/usbstorage/Make.defs
@@ -70,7 +70,7 @@ ifeq ($(CONFIG_STM32_RAISONANCE),y)
endif
ifeq ($(CONFIG_STM32_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
- CROSSDEV = arm-elf-
+ CROSSDEV = arm-nuttx-elf-
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
MAXOPTIMIZATION = -Os
endif
@@ -132,7 +132,7 @@ OBJEXT = .o
LIBEXT = .a
EXEEXT =
-ifneq ($(CROSSDEV),arm-elf-)
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
diff --git a/configs/kwikstik-k40/ostest/Make.defs b/configs/kwikstik-k40/ostest/Make.defs
index 0f03b6c19d6..43a5dd01e01 100644
--- a/configs/kwikstik-k40/ostest/Make.defs
+++ b/configs/kwikstik-k40/ostest/Make.defs
@@ -58,7 +58,7 @@ ifeq ($(CONFIG_KINETIS_DEVKITARM),y)
endif
ifeq ($(CONFIG_KINETIS_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
- CROSSDEV = arm-elf-
+ CROSSDEV = arm-nuttx-elf-
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft -mlong-calls
MAXOPTIMIZATION = -Os
endif
@@ -120,7 +120,7 @@ OBJEXT = .o
LIBEXT = .a
EXEEXT =
-ifneq ($(CROSSDEV),arm-elf-)
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
diff --git a/configs/lincoln60/nsh/Make.defs b/configs/lincoln60/nsh/Make.defs
index cca519da40b..9750a0e87cb 100644
--- a/configs/lincoln60/nsh/Make.defs
+++ b/configs/lincoln60/nsh/Make.defs
@@ -58,7 +58,7 @@ ifeq ($(CONFIG_LPC17_DEVKITARM),y)
endif
ifeq ($(CONFIG_LPC17_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
- CROSSDEV = arm-elf-
+ CROSSDEV = arm-nuttx-elf-
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
MAXOPTIMIZATION = -Os
endif
@@ -120,7 +120,7 @@ OBJEXT = .o
LIBEXT = .a
EXEEXT =
-ifneq ($(CROSSDEV),arm-elf-)
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
diff --git a/configs/lincoln60/ostest/Make.defs b/configs/lincoln60/ostest/Make.defs
index 29ef7c32777..c90939429b4 100644
--- a/configs/lincoln60/ostest/Make.defs
+++ b/configs/lincoln60/ostest/Make.defs
@@ -58,7 +58,7 @@ ifeq ($(CONFIG_LPC17_DEVKITARM),y)
endif
ifeq ($(CONFIG_LPC17_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
- CROSSDEV = arm-elf-
+ CROSSDEV = arm-nuttx-elf-
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
MAXOPTIMIZATION = -Os
endif
@@ -120,7 +120,7 @@ OBJEXT = .o
LIBEXT = .a
EXEEXT =
-ifneq ($(CROSSDEV),arm-elf-)
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
diff --git a/configs/lm3s6432-s2e/nsh/Make.defs b/configs/lm3s6432-s2e/nsh/Make.defs
index 3bac1a4dbf0..ef39674b2a2 100644
--- a/configs/lm3s6432-s2e/nsh/Make.defs
+++ b/configs/lm3s6432-s2e/nsh/Make.defs
@@ -58,7 +58,7 @@ ifeq ($(CONFIG_LM3S_DEVKITARM),y)
endif
ifeq ($(CONFIG_LM3S_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
- CROSSDEV = arm-elf-
+ CROSSDEV = arm-nuttx-elf-
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
MAXOPTIMIZATION = -Os
endif
@@ -120,7 +120,7 @@ OBJEXT = .o
LIBEXT = .a
EXEEXT =
-ifneq ($(CROSSDEV),arm-elf-)
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
diff --git a/configs/lm3s6432-s2e/ostest/Make.defs b/configs/lm3s6432-s2e/ostest/Make.defs
index 7d528cdf0fd..60368918325 100644
--- a/configs/lm3s6432-s2e/ostest/Make.defs
+++ b/configs/lm3s6432-s2e/ostest/Make.defs
@@ -58,7 +58,7 @@ ifeq ($(CONFIG_LM3S_DEVKITARM),y)
endif
ifeq ($(CONFIG_LM3S_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
- CROSSDEV = arm-elf-
+ CROSSDEV = arm-nuttx-elf-
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
MAXOPTIMIZATION = -Os
endif
@@ -120,7 +120,7 @@ OBJEXT = .o
LIBEXT = .a
EXEEXT =
-ifneq ($(CROSSDEV),arm-elf-)
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
diff --git a/configs/lm3s6965-ek/nsh/Make.defs b/configs/lm3s6965-ek/nsh/Make.defs
index 52a3c7bd1b4..17df0ebf7b7 100644
--- a/configs/lm3s6965-ek/nsh/Make.defs
+++ b/configs/lm3s6965-ek/nsh/Make.defs
@@ -58,7 +58,7 @@ ifeq ($(CONFIG_LM3S_DEVKITARM),y)
endif
ifeq ($(CONFIG_LM3S_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
- CROSSDEV = arm-elf-
+ CROSSDEV = arm-nuttx-elf-
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
MAXOPTIMIZATION = -Os
endif
@@ -120,7 +120,7 @@ OBJEXT = .o
LIBEXT = .a
EXEEXT =
-ifneq ($(CROSSDEV),arm-elf-)
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
diff --git a/configs/lm3s6965-ek/nx/Make.defs b/configs/lm3s6965-ek/nx/Make.defs
index 21b60450f6e..5ab0cfd2601 100644
--- a/configs/lm3s6965-ek/nx/Make.defs
+++ b/configs/lm3s6965-ek/nx/Make.defs
@@ -58,7 +58,7 @@ ifeq ($(CONFIG_LM3S_DEVKITARM),y)
endif
ifeq ($(CONFIG_LM3S_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
- CROSSDEV = arm-elf-
+ CROSSDEV = arm-nuttx-elf-
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
MAXOPTIMIZATION = -Os
endif
@@ -120,7 +120,7 @@ OBJEXT = .o
LIBEXT = .a
EXEEXT =
-ifneq ($(CROSSDEV),arm-elf-)
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
diff --git a/configs/lm3s6965-ek/ostest/Make.defs b/configs/lm3s6965-ek/ostest/Make.defs
index a834a57ef0d..5e49273a0c5 100644
--- a/configs/lm3s6965-ek/ostest/Make.defs
+++ b/configs/lm3s6965-ek/ostest/Make.defs
@@ -58,7 +58,7 @@ ifeq ($(CONFIG_LM3S_DEVKITARM),y)
endif
ifeq ($(CONFIG_LM3S_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
- CROSSDEV = arm-elf-
+ CROSSDEV = arm-nuttx-elf-
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
MAXOPTIMIZATION = -Os
endif
@@ -120,7 +120,7 @@ OBJEXT = .o
LIBEXT = .a
EXEEXT =
-ifneq ($(CROSSDEV),arm-elf-)
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
diff --git a/configs/lm3s8962-ek/nsh/Make.defs b/configs/lm3s8962-ek/nsh/Make.defs
index c37875c642b..cc7bce1e5c7 100644
--- a/configs/lm3s8962-ek/nsh/Make.defs
+++ b/configs/lm3s8962-ek/nsh/Make.defs
@@ -58,7 +58,7 @@ ifeq ($(CONFIG_LM3S_DEVKITARM),y)
endif
ifeq ($(CONFIG_LM3S_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
- CROSSDEV = arm-elf-
+ CROSSDEV = arm-nuttx-elf-
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
MAXOPTIMIZATION = -Os
endif
@@ -120,7 +120,7 @@ OBJEXT = .o
LIBEXT = .a
EXEEXT =
-ifneq ($(CROSSDEV),arm-elf-)
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
diff --git a/configs/lm3s8962-ek/nx/Make.defs b/configs/lm3s8962-ek/nx/Make.defs
index be150074ccb..b97aaa31ec3 100644
--- a/configs/lm3s8962-ek/nx/Make.defs
+++ b/configs/lm3s8962-ek/nx/Make.defs
@@ -58,7 +58,7 @@ ifeq ($(CONFIG_LM3S_DEVKITARM),y)
endif
ifeq ($(CONFIG_LM3S_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
- CROSSDEV = arm-elf-
+ CROSSDEV = arm-nuttx-elf-
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
MAXOPTIMIZATION = -Os
endif
@@ -120,7 +120,7 @@ OBJEXT = .o
LIBEXT = .a
EXEEXT =
-ifneq ($(CROSSDEV),arm-elf-)
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
diff --git a/configs/lm3s8962-ek/ostest/Make.defs b/configs/lm3s8962-ek/ostest/Make.defs
index 43bcfcddde9..4b4863d7cbb 100644
--- a/configs/lm3s8962-ek/ostest/Make.defs
+++ b/configs/lm3s8962-ek/ostest/Make.defs
@@ -58,7 +58,7 @@ ifeq ($(CONFIG_LM3S_DEVKITARM),y)
endif
ifeq ($(CONFIG_LM3S_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
- CROSSDEV = arm-elf-
+ CROSSDEV = arm-nuttx-elf-
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
MAXOPTIMIZATION = -Os
endif
@@ -120,7 +120,7 @@ OBJEXT = .o
LIBEXT = .a
EXEEXT =
-ifneq ($(CROSSDEV),arm-elf-)
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
diff --git a/configs/lpc4330-xplorer/nsh/Make.defs b/configs/lpc4330-xplorer/nsh/Make.defs
index 341671a9777..960fb2a41af 100644
--- a/configs/lpc4330-xplorer/nsh/Make.defs
+++ b/configs/lpc4330-xplorer/nsh/Make.defs
@@ -93,8 +93,8 @@ ifeq ($(CONFIG_LPC43_DEVKITARM),y)
endif
ifeq ($(CONFIG_LPC43_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
- CROSSDEV = arm-elf-
- ARCROSSDEV = arm-elf-
+ CROSSDEV = arm-nuttx-elf-
+ ARCROSSDEV = arm-nuttx-elf-
ARCHCPUFLAGS = -mtune=cortex-m4 -march=armv7-m -mfloat-abi=soft
MAXOPTIMIZATION = -Os
endif
@@ -176,7 +176,7 @@ OBJEXT = .o
LIBEXT = .a
EXEEXT =
-ifneq ($(CROSSDEV),arm-elf-)
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
diff --git a/configs/lpc4330-xplorer/ostest/Make.defs b/configs/lpc4330-xplorer/ostest/Make.defs
index 341671a9777..960fb2a41af 100644
--- a/configs/lpc4330-xplorer/ostest/Make.defs
+++ b/configs/lpc4330-xplorer/ostest/Make.defs
@@ -93,8 +93,8 @@ ifeq ($(CONFIG_LPC43_DEVKITARM),y)
endif
ifeq ($(CONFIG_LPC43_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
- CROSSDEV = arm-elf-
- ARCROSSDEV = arm-elf-
+ CROSSDEV = arm-nuttx-elf-
+ ARCROSSDEV = arm-nuttx-elf-
ARCHCPUFLAGS = -mtune=cortex-m4 -march=armv7-m -mfloat-abi=soft
MAXOPTIMIZATION = -Os
endif
@@ -176,7 +176,7 @@ OBJEXT = .o
LIBEXT = .a
EXEEXT =
-ifneq ($(CROSSDEV),arm-elf-)
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
diff --git a/configs/lpcxpresso-lpc1768/dhcpd/Make.defs b/configs/lpcxpresso-lpc1768/dhcpd/Make.defs
index 8ece92ca9c1..804e20ecd11 100644
--- a/configs/lpcxpresso-lpc1768/dhcpd/Make.defs
+++ b/configs/lpcxpresso-lpc1768/dhcpd/Make.defs
@@ -58,7 +58,7 @@ ifeq ($(CONFIG_LPC17_DEVKITARM),y)
endif
ifeq ($(CONFIG_LPC17_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
- CROSSDEV = arm-elf-
+ CROSSDEV = arm-nuttx-elf-
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
MAXOPTIMIZATION = -Os
endif
@@ -132,7 +132,7 @@ OBJEXT = .o
LIBEXT = .a
EXEEXT =
-ifneq ($(CROSSDEV),arm-elf-)
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
diff --git a/configs/lpcxpresso-lpc1768/nsh/Make.defs b/configs/lpcxpresso-lpc1768/nsh/Make.defs
index 21d84b4940a..8c6ad9ab85a 100644
--- a/configs/lpcxpresso-lpc1768/nsh/Make.defs
+++ b/configs/lpcxpresso-lpc1768/nsh/Make.defs
@@ -58,7 +58,7 @@ ifeq ($(CONFIG_LPC17_DEVKITARM),y)
endif
ifeq ($(CONFIG_LPC17_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
- CROSSDEV = arm-elf-
+ CROSSDEV = arm-nuttx-elf-
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
MAXOPTIMIZATION = -Os
endif
@@ -132,7 +132,7 @@ OBJEXT = .o
LIBEXT = .a
EXEEXT =
-ifneq ($(CROSSDEV),arm-elf-)
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
diff --git a/configs/lpcxpresso-lpc1768/nx/Make.defs b/configs/lpcxpresso-lpc1768/nx/Make.defs
index 9a7d190692c..a535fd03d02 100644
--- a/configs/lpcxpresso-lpc1768/nx/Make.defs
+++ b/configs/lpcxpresso-lpc1768/nx/Make.defs
@@ -58,7 +58,7 @@ ifeq ($(CONFIG_LPC17_DEVKITARM),y)
endif
ifeq ($(CONFIG_LPC17_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
- CROSSDEV = arm-elf-
+ CROSSDEV = arm-nuttx-elf-
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
MAXOPTIMIZATION = -Os
endif
@@ -132,7 +132,7 @@ OBJEXT = .o
LIBEXT = .a
EXEEXT =
-ifneq ($(CROSSDEV),arm-elf-)
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
diff --git a/configs/lpcxpresso-lpc1768/ostest/Make.defs b/configs/lpcxpresso-lpc1768/ostest/Make.defs
index 1dd92adb730..1b38f2d6b0f 100644
--- a/configs/lpcxpresso-lpc1768/ostest/Make.defs
+++ b/configs/lpcxpresso-lpc1768/ostest/Make.defs
@@ -58,7 +58,7 @@ ifeq ($(CONFIG_LPC17_DEVKITARM),y)
endif
ifeq ($(CONFIG_LPC17_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
- CROSSDEV = arm-elf-
+ CROSSDEV = arm-nuttx-elf-
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
MAXOPTIMIZATION = -Os
endif
@@ -132,7 +132,7 @@ OBJEXT = .o
LIBEXT = .a
EXEEXT =
-ifneq ($(CROSSDEV),arm-elf-)
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
diff --git a/configs/lpcxpresso-lpc1768/thttpd/Make.defs b/configs/lpcxpresso-lpc1768/thttpd/Make.defs
index fc40cce07d0..810d6d7da8d 100644
--- a/configs/lpcxpresso-lpc1768/thttpd/Make.defs
+++ b/configs/lpcxpresso-lpc1768/thttpd/Make.defs
@@ -58,7 +58,7 @@ ifeq ($(CONFIG_LPC17_DEVKITARM),y)
endif
ifeq ($(CONFIG_LPC17_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
- CROSSDEV = arm-elf-
+ CROSSDEV = arm-nuttx-elf-
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
MAXOPTIMIZATION = -Os
endif
@@ -137,7 +137,7 @@ OBJEXT = .o
LIBEXT = .a
EXEEXT =
-ifneq ($(CROSSDEV),arm-elf-)
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
diff --git a/configs/lpcxpresso-lpc1768/usbstorage/Make.defs b/configs/lpcxpresso-lpc1768/usbstorage/Make.defs
index d63e11efe1f..5342dde5b08 100644
--- a/configs/lpcxpresso-lpc1768/usbstorage/Make.defs
+++ b/configs/lpcxpresso-lpc1768/usbstorage/Make.defs
@@ -58,7 +58,7 @@ ifeq ($(CONFIG_LPC17_DEVKITARM),y)
endif
ifeq ($(CONFIG_LPC17_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
- CROSSDEV = arm-elf-
+ CROSSDEV = arm-nuttx-elf-
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
MAXOPTIMIZATION = -Os
endif
@@ -132,7 +132,7 @@ OBJEXT = .o
LIBEXT = .a
EXEEXT =
-ifneq ($(CROSSDEV),arm-elf-)
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
diff --git a/configs/m68332evb/Make.defs b/configs/m68332evb/Make.defs
index fdae944f011..fb85cf82722 100644
--- a/configs/m68332evb/Make.defs
+++ b/configs/m68332evb/Make.defs
@@ -50,7 +50,7 @@ ARCHDEFINES =
ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/ld.script
-CROSSDEV = m68k-elf-
+CROSSDEV = m68k-nuttx-elf-
CC = $(CROSSDEV)gcc
CPP = $(CROSSDEV)gcc -E
LD = $(CROSSDEV)ld
diff --git a/configs/m68332evb/doc/m68k-defconfig b/configs/m68332evb/doc/m68k-defconfig
index cbe3c11cd5b..60f2e4cbd6f 100644
--- a/configs/m68332evb/doc/m68k-defconfig
+++ b/configs/m68332evb/doc/m68k-defconfig
@@ -34,7 +34,7 @@ BR2_STAGING_DIR="$(BUILD_DIR)/staging_dir"
BR2_NUTTX_DIR="$(TOPDIR)/../nuttx"
BR2_TOPDIR_PREFIX=""
BR2_TOPDIR_SUFFIX=""
-BR2_GNU_BUILD_SUFFIX="m68k-elf"
+BR2_GNU_BUILD_SUFFIX="m68k-nuttx-elf"
BR2_GNU_TARGET_SUFFIX="elf"
# BR2_PREFER_IMA is not set
# BR2_DEPRECATED is not set
diff --git a/configs/mbed/hidkbd/Make.defs b/configs/mbed/hidkbd/Make.defs
index f033c685e4c..262571e452b 100644
--- a/configs/mbed/hidkbd/Make.defs
+++ b/configs/mbed/hidkbd/Make.defs
@@ -58,7 +58,7 @@ ifeq ($(CONFIG_LPC17_DEVKITARM),y)
endif
ifeq ($(CONFIG_LPC17_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
- CROSSDEV = arm-elf-
+ CROSSDEV = arm-nuttx-elf-
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
MAXOPTIMIZATION = -Os
endif
@@ -120,7 +120,7 @@ OBJEXT = .o
LIBEXT = .a
EXEEXT =
-ifneq ($(CROSSDEV),arm-elf-)
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
diff --git a/configs/mbed/nsh/Make.defs b/configs/mbed/nsh/Make.defs
index 468952aa25a..40c4c94f316 100644
--- a/configs/mbed/nsh/Make.defs
+++ b/configs/mbed/nsh/Make.defs
@@ -58,7 +58,7 @@ ifeq ($(CONFIG_LPC17_DEVKITARM),y)
endif
ifeq ($(CONFIG_LPC17_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
- CROSSDEV = arm-elf-
+ CROSSDEV = arm-nuttx-elf-
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
MAXOPTIMIZATION = -Os
endif
@@ -120,7 +120,7 @@ OBJEXT = .o
LIBEXT = .a
EXEEXT =
-ifneq ($(CROSSDEV),arm-elf-)
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
diff --git a/configs/mcu123-lpc214x/README.txt b/configs/mcu123-lpc214x/README.txt
index 8236798cc81..b819abf368c 100644
--- a/configs/mcu123-lpc214x/README.txt
+++ b/configs/mcu123-lpc214x/README.txt
@@ -42,7 +42,7 @@ GNU Toolchain Options
make # Will build for the NuttX buildroot toolchain
make CROSSDEV=arm-eabi- # Will build for the devkitARM toolchain
make CROSSDEV=arm-none-eabi- # Will build for the CodeSourcery toolchain
- make CROSSDEV=arm-elf- # Will build for the NuttX buildroot toolchain
+ make CROSSDEV=arm-nuttx-elf- # Will build for the NuttX buildroot toolchain
Of course, hard coding this CROSS_COMPILE value in Make.defs file will save
some repetitive typing.
diff --git a/configs/mcu123-lpc214x/composite/Make.defs b/configs/mcu123-lpc214x/composite/Make.defs
index 0173a21c6d2..f2f0ee8e883 100644
--- a/configs/mcu123-lpc214x/composite/Make.defs
+++ b/configs/mcu123-lpc214x/composite/Make.defs
@@ -40,7 +40,7 @@ include ${TOPDIR}/tools/Config.mk
# make -- Will build for the CodeSourcery toolchain
# make CROSSDEV=arm-eabi- -- Will build for the devkitARM toolchain
# make CROSSDEV=arm-none-eabi- -- Will build for the CodeSourcery toolchain
-# make CROSSDEV=arm-elf- -- Will build for the NuttX buildroot toolchain
+# make CROSSDEV=arm-nuttx-elf- -- Will build for the NuttX buildroot toolchain
CROSSDEV = arm-none-eabi-
CC = $(CROSSDEV)gcc
@@ -63,7 +63,7 @@ OBJCOPYARGS = -R .note -R .note.gnu.build-id -R .comment
endif
endif
-ifeq ($(CROSSDEV),arm-elf-)
+ifeq ($(CROSSDEV),arm-nuttx-elf-)
MKDEP = $(TOPDIR)/tools/mkdeps.sh
ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
@@ -118,7 +118,7 @@ OBJEXT = .o
LIBEXT = .a
EXEEXT =
-ifneq ($(CROSSDEV),arm-elf-)
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
diff --git a/configs/mcu123-lpc214x/nsh/Make.defs b/configs/mcu123-lpc214x/nsh/Make.defs
index daa7a34665b..de09916e5f4 100644
--- a/configs/mcu123-lpc214x/nsh/Make.defs
+++ b/configs/mcu123-lpc214x/nsh/Make.defs
@@ -40,9 +40,9 @@ include ${TOPDIR}/tools/Config.mk
# make -- Will build for the NuttX buildroot toolchain
# make CROSSDEV=arm-eabi- -- Will build for the devkitARM toolchain
# make CROSSDEV=arm-none-eabi- -- Will build for the CodeSourcery toolchain
-# make CROSSDEV=arm-elf- -- Will build for the NuttX buildroot toolchain
+# make CROSSDEV=arm-nuttx-elf- -- Will build for the NuttX buildroot toolchain
-CROSSDEV = arm-elf-
+CROSSDEV = arm-nuttx-elf-
CC = $(CROSSDEV)gcc
CXX = $(CROSSDEV)g++
CPP = $(CROSSDEV)gcc -E
@@ -63,7 +63,7 @@ OBJCOPYARGS = -R .note -R .note.gnu.build-id -R .comment
endif
endif
-ifeq ($(CROSSDEV),arm-elf-)
+ifeq ($(CROSSDEV),arm-nuttx-elf-)
MKDEP = $(TOPDIR)/tools/mkdeps.sh
ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
@@ -118,7 +118,7 @@ OBJEXT = .o
LIBEXT = .a
EXEEXT =
-ifneq ($(CROSSDEV),arm-elf-)
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
diff --git a/configs/mcu123-lpc214x/ostest/Make.defs b/configs/mcu123-lpc214x/ostest/Make.defs
index d807c7bbd2c..bc72ca9bdc4 100644
--- a/configs/mcu123-lpc214x/ostest/Make.defs
+++ b/configs/mcu123-lpc214x/ostest/Make.defs
@@ -40,9 +40,9 @@ include ${TOPDIR}/tools/Config.mk
# make -- Will build for the NuttX buildroot toolchain
# make CROSSDEV=arm-eabi- -- Will build for the devkitARM toolchain
# make CROSSDEV=arm-none-eabi- -- Will build for the CodeSourcery toolchain
-# make CROSSDEV=arm-elf- -- Will build for the NuttX buildroot toolchain
+# make CROSSDEV=arm-nuttx-elf- -- Will build for the NuttX buildroot toolchain
-CROSSDEV = arm-elf-
+CROSSDEV = arm-nuttx-elf-
CC = $(CROSSDEV)gcc
CXX = $(CROSSDEV)g++
CPP = $(CROSSDEV)gcc -E
@@ -63,7 +63,7 @@ OBJCOPYARGS = -R .note -R .note.gnu.build-id -R .comment
endif
endif
-ifeq ($(CROSSDEV),arm-elf-)
+ifeq ($(CROSSDEV),arm-nuttx-elf-)
MKDEP = $(TOPDIR)/tools/mkdeps.sh
ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
@@ -118,7 +118,7 @@ OBJEXT = .o
LIBEXT = .a
EXEEXT =
-ifneq ($(CROSSDEV),arm-elf-)
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
diff --git a/configs/mcu123-lpc214x/usbserial/Make.defs b/configs/mcu123-lpc214x/usbserial/Make.defs
index 22edf3bab60..106224ef123 100644
--- a/configs/mcu123-lpc214x/usbserial/Make.defs
+++ b/configs/mcu123-lpc214x/usbserial/Make.defs
@@ -40,9 +40,9 @@ include ${TOPDIR}/tools/Config.mk
# make -- Will build for the NuttX buildroot toolchain
# make CROSSDEV=arm-eabi- -- Will build for the devkitARM toolchain
# make CROSSDEV=arm-none-eabi- -- Will build for the CodeSourcery toolchain
-# make CROSSDEV=arm-elf- -- Will build for the NuttX buildroot toolchain
+# make CROSSDEV=arm-nuttx-elf- -- Will build for the NuttX buildroot toolchain
-CROSSDEV = arm-elf-
+CROSSDEV = arm-nuttx-elf-
CC = $(CROSSDEV)gcc
CXX = $(CROSSDEV)g++
CPP = $(CROSSDEV)gcc -E
@@ -63,7 +63,7 @@ OBJCOPYARGS = -R .note -R .note.gnu.build-id -R .comment
endif
endif
-ifeq ($(CROSSDEV),arm-elf-)
+ifeq ($(CROSSDEV),arm-nuttx-elf-)
MKDEP = $(TOPDIR)/tools/mkdeps.sh
ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
@@ -118,7 +118,7 @@ OBJEXT = .o
LIBEXT = .a
EXEEXT =
-ifneq ($(CROSSDEV),arm-elf-)
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
diff --git a/configs/mcu123-lpc214x/usbstorage/Make.defs b/configs/mcu123-lpc214x/usbstorage/Make.defs
index 732a6733ba8..bf1b9cab45b 100644
--- a/configs/mcu123-lpc214x/usbstorage/Make.defs
+++ b/configs/mcu123-lpc214x/usbstorage/Make.defs
@@ -40,9 +40,9 @@ include ${TOPDIR}/tools/Config.mk
# make -- Will build for the NuttX buildroot toolchain
# make CROSSDEV=arm-eabi- -- Will build for the devkitARM toolchain
# make CROSSDEV=arm-none-eabi- -- Will build for the CodeSourcery toolchain
-# make CROSSDEV=arm-elf- -- Will build for the NuttX buildroot toolchain
+# make CROSSDEV=arm-nuttx-elf- -- Will build for the NuttX buildroot toolchain
-CROSSDEV = arm-elf-
+CROSSDEV = arm-nuttx-elf-
CC = $(CROSSDEV)gcc
CXX = $(CROSSDEV)g++
CPP = $(CROSSDEV)gcc -E
@@ -63,7 +63,7 @@ OBJCOPYARGS = -R .note -R .note.gnu.build-id -R .comment
endif
endif
-ifeq ($(CROSSDEV),arm-elf-)
+ifeq ($(CROSSDEV),arm-nuttx-elf-)
MKDEP = $(TOPDIR)/tools/mkdeps.sh
ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
@@ -118,7 +118,7 @@ OBJEXT = .o
LIBEXT = .a
EXEEXT =
-ifneq ($(CROSSDEV),arm-elf-)
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
diff --git a/configs/micropendous3/README.txt b/configs/micropendous3/README.txt
index e7b2041aa55..c05f1ddd5be 100644
--- a/configs/micropendous3/README.txt
+++ b/configs/micropendous3/README.txt
@@ -523,7 +523,7 @@ Where is one of the following:
FLASH/SRAM Requirements (as of 6/16/2011):
- $ avr-elf-size nuttx
+ $ avr-nuttx-elf-size nuttx
text data bss dec hex filename
24816 978 308 26102 65f6 nuttx
diff --git a/configs/micropendous3/hello/Make.defs b/configs/micropendous3/hello/Make.defs
index 058f166905c..178f355567e 100644
--- a/configs/micropendous3/hello/Make.defs
+++ b/configs/micropendous3/hello/Make.defs
@@ -57,7 +57,7 @@ endif
ifeq ($(CONFIG_AVR_BUILDROOT),y)
# NuttX buildroot GCC toolchain under Linux or Cygwin
- CROSSDEV = avr-elf-
+ CROSSDEV = avr-nuttx-elf-
MAXOPTIMIZATION = -O2
ARCHCPUFLAGS = -mmcu=at90usb647
LDFLAGS += -nostartfiles -nodefaultlibs
diff --git a/configs/mx1ads/ostest/Make.defs b/configs/mx1ads/ostest/Make.defs
index c80af5c62d9..71e053b0aa2 100644
--- a/configs/mx1ads/ostest/Make.defs
+++ b/configs/mx1ads/ostest/Make.defs
@@ -36,7 +36,7 @@
include ${TOPDIR}/.config
include ${TOPDIR}/tools/Config.mk
-CROSSDEV = arm-elf-
+CROSSDEV = arm-nuttx-elf-
CC = $(CROSSDEV)gcc
CXX = $(CROSSDEV)g++
CPP = $(CROSSDEV)gcc -E
diff --git a/configs/ne64badge/ostest/Make.defs b/configs/ne64badge/ostest/Make.defs
index 4dc164d153a..9521a0a660a 100644
--- a/configs/ne64badge/ostest/Make.defs
+++ b/configs/ne64badge/ostest/Make.defs
@@ -39,7 +39,7 @@ include ${TOPDIR}/tools/Config.mk
# Setup for the selected toolchain
# NuttX buildroot under Linux or Cygwin
-CROSSDEV = m9s12x-elf-
+CROSSDEV = m9s12x-nuttx-elf-
MAXOPTIMIZATION = -Os
WINTOOL = n
diff --git a/configs/ntosd-dm320/nettest/Make.defs b/configs/ntosd-dm320/nettest/Make.defs
index b3d49bc7317..30d369c2ac3 100644
--- a/configs/ntosd-dm320/nettest/Make.defs
+++ b/configs/ntosd-dm320/nettest/Make.defs
@@ -56,7 +56,7 @@ ifeq ($(CONFIG_DM320_DEVKITARM),y)
endif
ifeq ($(CONFIG_DM320_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
- CROSSDEV = arm-elf-
+ CROSSDEV = arm-nuttx-elf-
MAXOPTIMIZATION = -Os
endif
diff --git a/configs/ntosd-dm320/nsh/Make.defs b/configs/ntosd-dm320/nsh/Make.defs
index 6a590a442a4..14038f7562b 100644
--- a/configs/ntosd-dm320/nsh/Make.defs
+++ b/configs/ntosd-dm320/nsh/Make.defs
@@ -56,7 +56,7 @@ ifeq ($(CONFIG_DM320_DEVKITARM),y)
endif
ifeq ($(CONFIG_DM320_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
- CROSSDEV = arm-elf-
+ CROSSDEV = arm-nuttx-elf-
MAXOPTIMIZATION = -Os
endif
diff --git a/configs/ntosd-dm320/ostest/Make.defs b/configs/ntosd-dm320/ostest/Make.defs
index dda36c8febf..4618c42467f 100644
--- a/configs/ntosd-dm320/ostest/Make.defs
+++ b/configs/ntosd-dm320/ostest/Make.defs
@@ -56,7 +56,7 @@ ifeq ($(CONFIG_DM320_DEVKITARM),y)
endif
ifeq ($(CONFIG_DM320_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
- CROSSDEV = arm-elf-
+ CROSSDEV = arm-nuttx-elf-
MAXOPTIMIZATION = -Os
endif
diff --git a/configs/ntosd-dm320/poll/Make.defs b/configs/ntosd-dm320/poll/Make.defs
index a3abff2ef27..c06139bd6dc 100644
--- a/configs/ntosd-dm320/poll/Make.defs
+++ b/configs/ntosd-dm320/poll/Make.defs
@@ -56,7 +56,7 @@ ifeq ($(CONFIG_DM320_DEVKITARM),y)
endif
ifeq ($(CONFIG_DM320_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
- CROSSDEV = arm-elf-
+ CROSSDEV = arm-nuttx-elf-
MAXOPTIMIZATION = -Os
endif
diff --git a/configs/ntosd-dm320/thttpd/Make.defs b/configs/ntosd-dm320/thttpd/Make.defs
index 40ecf053f38..075f72eaa20 100644
--- a/configs/ntosd-dm320/thttpd/Make.defs
+++ b/configs/ntosd-dm320/thttpd/Make.defs
@@ -56,7 +56,7 @@ ifeq ($(CONFIG_DM320_DEVKITARM),y)
endif
ifeq ($(CONFIG_DM320_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
- CROSSDEV = arm-elf-
+ CROSSDEV = arm-nuttx-elf-
MAXOPTIMIZATION = -Os
endif
diff --git a/configs/ntosd-dm320/udp/Make.defs b/configs/ntosd-dm320/udp/Make.defs
index 6122aeb11ce..66750f13d6b 100644
--- a/configs/ntosd-dm320/udp/Make.defs
+++ b/configs/ntosd-dm320/udp/Make.defs
@@ -56,7 +56,7 @@ ifeq ($(CONFIG_DM320_DEVKITARM),y)
endif
ifeq ($(CONFIG_DM320_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
- CROSSDEV = arm-elf-
+ CROSSDEV = arm-nuttx-elf-
MAXOPTIMIZATION = -Os
endif
diff --git a/configs/ntosd-dm320/uip/Make.defs b/configs/ntosd-dm320/uip/Make.defs
index 758924a157d..d59b96e7c73 100644
--- a/configs/ntosd-dm320/uip/Make.defs
+++ b/configs/ntosd-dm320/uip/Make.defs
@@ -56,7 +56,7 @@ ifeq ($(CONFIG_DM320_DEVKITARM),y)
endif
ifeq ($(CONFIG_DM320_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
- CROSSDEV = arm-elf-
+ CROSSDEV = arm-nuttx-elf-
MAXOPTIMIZATION = -Os
endif
diff --git a/configs/nucleus2g/nsh/Make.defs b/configs/nucleus2g/nsh/Make.defs
index 65ec1c8f019..3b8f857a6ae 100644
--- a/configs/nucleus2g/nsh/Make.defs
+++ b/configs/nucleus2g/nsh/Make.defs
@@ -58,7 +58,7 @@ ifeq ($(CONFIG_LPC17_DEVKITARM),y)
endif
ifeq ($(CONFIG_LPC17_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
- CROSSDEV = arm-elf-
+ CROSSDEV = arm-nuttx-elf-
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
MAXOPTIMIZATION = -Os
endif
@@ -120,7 +120,7 @@ OBJEXT = .o
LIBEXT = .a
EXEEXT =
-ifneq ($(CROSSDEV),arm-elf-)
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
diff --git a/configs/nucleus2g/ostest/Make.defs b/configs/nucleus2g/ostest/Make.defs
index 413f4017874..aa0e6f8648a 100644
--- a/configs/nucleus2g/ostest/Make.defs
+++ b/configs/nucleus2g/ostest/Make.defs
@@ -58,7 +58,7 @@ ifeq ($(CONFIG_LPC17_DEVKITARM),y)
endif
ifeq ($(CONFIG_LPC17_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
- CROSSDEV = arm-elf-
+ CROSSDEV = arm-nuttx-elf-
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
MAXOPTIMIZATION = -Os
endif
@@ -120,7 +120,7 @@ OBJEXT = .o
LIBEXT = .a
EXEEXT =
-ifneq ($(CROSSDEV),arm-elf-)
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
diff --git a/configs/nucleus2g/usbserial/Make.defs b/configs/nucleus2g/usbserial/Make.defs
index 5e473323eb6..483fd526093 100644
--- a/configs/nucleus2g/usbserial/Make.defs
+++ b/configs/nucleus2g/usbserial/Make.defs
@@ -58,7 +58,7 @@ ifeq ($(CONFIG_LPC17_DEVKITARM),y)
endif
ifeq ($(CONFIG_LPC17_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
- CROSSDEV = arm-elf-
+ CROSSDEV = arm-nuttx-elf-
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
MAXOPTIMIZATION = -Os
endif
@@ -120,7 +120,7 @@ OBJEXT = .o
LIBEXT = .a
EXEEXT =
-ifneq ($(CROSSDEV),arm-elf-)
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
diff --git a/configs/nucleus2g/usbstorage/Make.defs b/configs/nucleus2g/usbstorage/Make.defs
index 35487f85bea..7a9c1fa6bcd 100644
--- a/configs/nucleus2g/usbstorage/Make.defs
+++ b/configs/nucleus2g/usbstorage/Make.defs
@@ -58,7 +58,7 @@ ifeq ($(CONFIG_LPC17_DEVKITARM),y)
endif
ifeq ($(CONFIG_LPC17_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
- CROSSDEV = arm-elf-
+ CROSSDEV = arm-nuttx-elf-
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
MAXOPTIMIZATION = -Os
endif
@@ -120,7 +120,7 @@ OBJEXT = .o
LIBEXT = .a
EXEEXT =
-ifneq ($(CROSSDEV),arm-elf-)
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
diff --git a/configs/olimex-lpc1766stk/README.txt b/configs/olimex-lpc1766stk/README.txt
index aaf40f9ff20..a8bea4d0efb 100644
--- a/configs/olimex-lpc1766stk/README.txt
+++ b/configs/olimex-lpc1766stk/README.txt
@@ -534,7 +534,7 @@ Using OpenOCD and GDB with an FT2232 JTAG emulator
Once the OpenOCD daemon has been started, you can connect to it via
GDB using the following GDB command:
- arm-elf-gdb
+ arm-nuttx-elf-gdb
(gdb) target remote localhost:3333
NOTE: The name of your GDB program may differ. For example, with the
diff --git a/configs/olimex-lpc1766stk/ftpc/Make.defs b/configs/olimex-lpc1766stk/ftpc/Make.defs
index 82cf0a2cd68..5671fdffb58 100644
--- a/configs/olimex-lpc1766stk/ftpc/Make.defs
+++ b/configs/olimex-lpc1766stk/ftpc/Make.defs
@@ -58,7 +58,7 @@ ifeq ($(CONFIG_LPC17_DEVKITARM),y)
endif
ifeq ($(CONFIG_LPC17_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
- CROSSDEV = arm-elf-
+ CROSSDEV = arm-nuttx-elf-
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
MAXOPTIMIZATION = -Os
endif
@@ -123,7 +123,7 @@ OBJEXT = .o
LIBEXT = .a
EXEEXT =
-ifneq ($(CROSSDEV),arm-elf-)
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
diff --git a/configs/olimex-lpc1766stk/hidkbd/Make.defs b/configs/olimex-lpc1766stk/hidkbd/Make.defs
index dd97168142e..1e7160c3859 100644
--- a/configs/olimex-lpc1766stk/hidkbd/Make.defs
+++ b/configs/olimex-lpc1766stk/hidkbd/Make.defs
@@ -58,7 +58,7 @@ ifeq ($(CONFIG_LPC17_DEVKITARM),y)
endif
ifeq ($(CONFIG_LPC17_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
- CROSSDEV = arm-elf-
+ CROSSDEV = arm-nuttx-elf-
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
MAXOPTIMIZATION = -Os
endif
@@ -120,7 +120,7 @@ OBJEXT = .o
LIBEXT = .a
EXEEXT =
-ifneq ($(CROSSDEV),arm-elf-)
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
diff --git a/configs/olimex-lpc1766stk/nettest/Make.defs b/configs/olimex-lpc1766stk/nettest/Make.defs
index 634d97315eb..2502cf97b80 100644
--- a/configs/olimex-lpc1766stk/nettest/Make.defs
+++ b/configs/olimex-lpc1766stk/nettest/Make.defs
@@ -58,7 +58,7 @@ ifeq ($(CONFIG_LPC17_DEVKITARM),y)
endif
ifeq ($(CONFIG_LPC17_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
- CROSSDEV = arm-elf-
+ CROSSDEV = arm-nuttx-elf-
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
MAXOPTIMIZATION = -Os
endif
@@ -120,7 +120,7 @@ OBJEXT = .o
LIBEXT = .a
EXEEXT =
-ifneq ($(CROSSDEV),arm-elf-)
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
diff --git a/configs/olimex-lpc1766stk/nsh/Make.defs b/configs/olimex-lpc1766stk/nsh/Make.defs
index af9750f4065..7e62fd7fb25 100644
--- a/configs/olimex-lpc1766stk/nsh/Make.defs
+++ b/configs/olimex-lpc1766stk/nsh/Make.defs
@@ -58,7 +58,7 @@ ifeq ($(CONFIG_LPC17_DEVKITARM),y)
endif
ifeq ($(CONFIG_LPC17_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
- CROSSDEV = arm-elf-
+ CROSSDEV = arm-nuttx-elf-
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
MAXOPTIMIZATION = -Os
endif
@@ -120,7 +120,7 @@ OBJEXT = .o
LIBEXT = .a
EXEEXT =
-ifneq ($(CROSSDEV),arm-elf-)
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
diff --git a/configs/olimex-lpc1766stk/nx/Make.defs b/configs/olimex-lpc1766stk/nx/Make.defs
index 685d827dad5..735e2bd0a2e 100644
--- a/configs/olimex-lpc1766stk/nx/Make.defs
+++ b/configs/olimex-lpc1766stk/nx/Make.defs
@@ -58,7 +58,7 @@ ifeq ($(CONFIG_LPC17_DEVKITARM),y)
endif
ifeq ($(CONFIG_LPC17_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
- CROSSDEV = arm-elf-
+ CROSSDEV = arm-nuttx-elf-
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
MAXOPTIMIZATION = -Os
endif
@@ -120,7 +120,7 @@ OBJEXT = .o
LIBEXT = .a
EXEEXT =
-ifneq ($(CROSSDEV),arm-elf-)
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
diff --git a/configs/olimex-lpc1766stk/ostest/Make.defs b/configs/olimex-lpc1766stk/ostest/Make.defs
index 84467ae64bf..7a9475761a8 100644
--- a/configs/olimex-lpc1766stk/ostest/Make.defs
+++ b/configs/olimex-lpc1766stk/ostest/Make.defs
@@ -58,7 +58,7 @@ ifeq ($(CONFIG_LPC17_DEVKITARM),y)
endif
ifeq ($(CONFIG_LPC17_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
- CROSSDEV = arm-elf-
+ CROSSDEV = arm-nuttx-elf-
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
MAXOPTIMIZATION = -Os
endif
@@ -120,7 +120,7 @@ OBJEXT = .o
LIBEXT = .a
EXEEXT =
-ifneq ($(CROSSDEV),arm-elf-)
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
diff --git a/configs/olimex-lpc1766stk/slip-httpd/Make.defs b/configs/olimex-lpc1766stk/slip-httpd/Make.defs
index 61b7f41e74a..35d2c6480f6 100644
--- a/configs/olimex-lpc1766stk/slip-httpd/Make.defs
+++ b/configs/olimex-lpc1766stk/slip-httpd/Make.defs
@@ -58,7 +58,7 @@ ifeq ($(CONFIG_LPC17_DEVKITARM),y)
endif
ifeq ($(CONFIG_LPC17_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
- CROSSDEV = arm-elf-
+ CROSSDEV = arm-nuttx-elf-
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
MAXOPTIMIZATION = -Os
endif
@@ -123,7 +123,7 @@ OBJEXT = .o
LIBEXT = .a
EXEEXT =
-ifneq ($(CROSSDEV),arm-elf-)
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
diff --git a/configs/olimex-lpc1766stk/thttpd/Make.defs b/configs/olimex-lpc1766stk/thttpd/Make.defs
index 0e37dbaa326..dbd84c2a6f2 100644
--- a/configs/olimex-lpc1766stk/thttpd/Make.defs
+++ b/configs/olimex-lpc1766stk/thttpd/Make.defs
@@ -58,7 +58,7 @@ ifeq ($(CONFIG_LPC17_DEVKITARM),y)
endif
ifeq ($(CONFIG_LPC17_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
- CROSSDEV = arm-elf-
+ CROSSDEV = arm-nuttx-elf-
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
MAXOPTIMIZATION = -Os
endif
@@ -123,7 +123,7 @@ OBJEXT = .o
LIBEXT = .a
EXEEXT =
-ifneq ($(CROSSDEV),arm-elf-)
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
diff --git a/configs/olimex-lpc1766stk/usbserial/Make.defs b/configs/olimex-lpc1766stk/usbserial/Make.defs
index 7a56eb62236..07cd41d4680 100644
--- a/configs/olimex-lpc1766stk/usbserial/Make.defs
+++ b/configs/olimex-lpc1766stk/usbserial/Make.defs
@@ -58,7 +58,7 @@ ifeq ($(CONFIG_LPC17_DEVKITARM),y)
endif
ifeq ($(CONFIG_LPC17_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
- CROSSDEV = arm-elf-
+ CROSSDEV = arm-nuttx-elf-
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
MAXOPTIMIZATION = -Os
endif
@@ -120,7 +120,7 @@ OBJEXT = .o
LIBEXT = .a
EXEEXT =
-ifneq ($(CROSSDEV),arm-elf-)
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
diff --git a/configs/olimex-lpc1766stk/usbstorage/Make.defs b/configs/olimex-lpc1766stk/usbstorage/Make.defs
index 627cdd64e3e..76a6927ee39 100644
--- a/configs/olimex-lpc1766stk/usbstorage/Make.defs
+++ b/configs/olimex-lpc1766stk/usbstorage/Make.defs
@@ -58,7 +58,7 @@ ifeq ($(CONFIG_LPC17_DEVKITARM),y)
endif
ifeq ($(CONFIG_LPC17_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
- CROSSDEV = arm-elf-
+ CROSSDEV = arm-nuttx-elf-
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
MAXOPTIMIZATION = -Os
endif
@@ -120,7 +120,7 @@ OBJEXT = .o
LIBEXT = .a
EXEEXT =
-ifneq ($(CROSSDEV),arm-elf-)
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
diff --git a/configs/olimex-lpc1766stk/wlan/Make.defs b/configs/olimex-lpc1766stk/wlan/Make.defs
index 1087fd8ccf6..0cc0d7edd3a 100644
--- a/configs/olimex-lpc1766stk/wlan/Make.defs
+++ b/configs/olimex-lpc1766stk/wlan/Make.defs
@@ -58,7 +58,7 @@ ifeq ($(CONFIG_LPC17_DEVKITARM),y)
endif
ifeq ($(CONFIG_LPC17_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
- CROSSDEV = arm-elf-
+ CROSSDEV = arm-nuttx-elf-
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
MAXOPTIMIZATION = -Os
endif
@@ -120,7 +120,7 @@ OBJEXT = .o
LIBEXT = .a
EXEEXT =
-ifneq ($(CROSSDEV),arm-elf-)
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
diff --git a/configs/olimex-lpc2378/nsh/Make.defs b/configs/olimex-lpc2378/nsh/Make.defs
index f81cfb448cd..2821aa73c20 100644
--- a/configs/olimex-lpc2378/nsh/Make.defs
+++ b/configs/olimex-lpc2378/nsh/Make.defs
@@ -61,7 +61,7 @@ ifeq ($(CONFIG_OLIMEX_LPC2378_DEVKITARM),y)
endif
ifeq ($(CONFIG_OLIMEX_LPC2378_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
- CROSSDEV = arm-elf-
+ CROSSDEV = arm-nuttx-elf-
MAXOPTIMIZATION = -Os
endif
@@ -137,7 +137,7 @@ OBJEXT = .o
LIBEXT = .a
EXEEXT =
-ifneq ($(CROSSDEV),arm-elf-)
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG),y)
diff --git a/configs/olimex-lpc2378/ostest/Make.defs b/configs/olimex-lpc2378/ostest/Make.defs
index d13e5eda093..69be8db5b1c 100644
--- a/configs/olimex-lpc2378/ostest/Make.defs
+++ b/configs/olimex-lpc2378/ostest/Make.defs
@@ -61,7 +61,7 @@ ifeq ($(CONFIG_OLIMEX_LPC2378_DEVKITARM),y)
endif
ifeq ($(CONFIG_OLIMEX_LPC2378_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
- CROSSDEV = arm-elf-
+ CROSSDEV = arm-nuttx-elf-
MAXOPTIMIZATION = -Os
endif
@@ -137,7 +137,7 @@ OBJEXT = .o
LIBEXT = .a
EXEEXT =
-ifneq ($(CROSSDEV),arm-elf-)
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG),y)
diff --git a/configs/olimex-stm32-p107/nsh/Make.defs b/configs/olimex-stm32-p107/nsh/Make.defs
index a1a30f8791f..0108ef1eecf 100644
--- a/configs/olimex-stm32-p107/nsh/Make.defs
+++ b/configs/olimex-stm32-p107/nsh/Make.defs
@@ -70,7 +70,7 @@ ifeq ($(CONFIG_STM32_RAISONANCE),y)
endif
ifeq ($(CONFIG_STM32_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
- CROSSDEV = arm-elf-
+ CROSSDEV = arm-nuttx-elf-
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
MAXOPTIMIZATION = -Os
endif
@@ -132,7 +132,7 @@ OBJEXT = .o
LIBEXT = .a
EXEEXT =
-ifneq ($(CROSSDEV),arm-elf-)
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
diff --git a/configs/olimex-stm32-p107/ostest/Make.defs b/configs/olimex-stm32-p107/ostest/Make.defs
index 2e8cf87ac5d..7cf5e765fff 100644
--- a/configs/olimex-stm32-p107/ostest/Make.defs
+++ b/configs/olimex-stm32-p107/ostest/Make.defs
@@ -70,7 +70,7 @@ ifeq ($(CONFIG_STM32_RAISONANCE),y)
endif
ifeq ($(CONFIG_STM32_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
- CROSSDEV = arm-elf-
+ CROSSDEV = arm-nuttx-elf-
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
MAXOPTIMIZATION = -Os
endif
@@ -132,7 +132,7 @@ OBJEXT = .o
LIBEXT = .a
EXEEXT =
-ifneq ($(CROSSDEV),arm-elf-)
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
diff --git a/configs/olimex-strp711/README.txt b/configs/olimex-strp711/README.txt
index 955887d7b70..74168dbfa98 100644
--- a/configs/olimex-strp711/README.txt
+++ b/configs/olimex-strp711/README.txt
@@ -127,7 +127,7 @@ GNU Toolchain Options
make # Will build for the NuttX buildroot toolchain
make CROSSDEV=arm-eabi- # Will build for the devkitARM toolchain
make CROSSDEV=arm-none-eabi- # Will build for the CodeSourcery toolchain
- make CROSSDEV=arm-elf- # Will build for the NuttX buildroot toolchain
+ make CROSSDEV=arm-nuttx-elf- # Will build for the NuttX buildroot toolchain
Of course, hard coding this CROSS_COMPILE value in Make.defs file will save
some repetitive typing.
@@ -267,7 +267,7 @@ GENERAL STEPS:
6. GDB
- start arm-elf-gdb
+ start arm-nuttx-elf-gdb
type 'file ' to load the executable
type 'set debug remote 1' to enable tracing of gdb protocol (if required)
type 'target remote localhost:3333' to connect to the target
@@ -301,7 +301,7 @@ Windows OpenOCD will Olimex JTAG
Once the OpenOCD daemon has been started, you can connect to it via
GDB using the following GDB command:
- arm-elf-gdb
+ arm-nuttx-elf-gdb
(gdb) target remote localhost:3333
And you can load the NuttX ELF file into FLASH:
diff --git a/configs/olimex-strp711/nettest/Make.defs b/configs/olimex-strp711/nettest/Make.defs
index 9676e54fae4..e4b8a9852cc 100644
--- a/configs/olimex-strp711/nettest/Make.defs
+++ b/configs/olimex-strp711/nettest/Make.defs
@@ -40,9 +40,9 @@ include ${TOPDIR}/tools/Config.mk
# make -- Will build for the NuttX buildroot toolchain
# make CROSSDEV=arm-eabi- -- Will build for the devkitARM toolchain
# make CROSSDEV=arm-none-eabi- -- Will build for the CodeSourcery toolchain
-# make CROSSDEV=arm-elf- -- Will build for the NuttX buildroot toolchain
+# make CROSSDEV=arm-nuttx-elf- -- Will build for the NuttX buildroot toolchain
-CROSSDEV = arm-elf-
+CROSSDEV = arm-nuttx-elf-
CC = $(CROSSDEV)gcc
CXX = $(CROSSDEV)g++
CPP = $(CROSSDEV)gcc -E
@@ -63,7 +63,7 @@ OBJCOPYARGS = -R .note -R .note.gnu.build-id -R .comment
endif
endif
-ifeq ($(CROSSDEV),arm-elf-)
+ifeq ($(CROSSDEV),arm-nuttx-elf-)
MKDEP = $(TOPDIR)/tools/mkdeps.sh
ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
@@ -118,7 +118,7 @@ OBJEXT = .o
LIBEXT = .a
EXEEXT =
-ifneq ($(CROSSDEV),arm-elf-)
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
diff --git a/configs/olimex-strp711/nsh/Make.defs b/configs/olimex-strp711/nsh/Make.defs
index ad75862fa19..9ef265d0e13 100644
--- a/configs/olimex-strp711/nsh/Make.defs
+++ b/configs/olimex-strp711/nsh/Make.defs
@@ -40,9 +40,9 @@ include ${TOPDIR}/tools/Config.mk
# make -- Will build for the NuttX buildroot toolchain
# make CROSSDEV=arm-eabi- -- Will build for the devkitARM toolchain
# make CROSSDEV=arm-none-eabi- -- Will build for the CodeSourcery toolchain
-# make CROSSDEV=arm-elf- -- Will build for the NuttX buildroot toolchain
+# make CROSSDEV=arm-nuttx-elf- -- Will build for the NuttX buildroot toolchain
-CROSSDEV = arm-elf-
+CROSSDEV = arm-nuttx-elf-
CC = $(CROSSDEV)gcc
CXX = $(CROSSDEV)g++
CPP = $(CROSSDEV)gcc -E
@@ -63,7 +63,7 @@ OBJCOPYARGS = -R .note -R .note.gnu.build-id -R .comment
endif
endif
-ifeq ($(CROSSDEV),arm-elf-)
+ifeq ($(CROSSDEV),arm-nuttx-elf-)
MKDEP = $(TOPDIR)/tools/mkdeps.sh
ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
@@ -118,7 +118,7 @@ OBJEXT = .o
LIBEXT = .a
EXEEXT =
-ifneq ($(CROSSDEV),arm-elf-)
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
diff --git a/configs/olimex-strp711/ostest/Make.defs b/configs/olimex-strp711/ostest/Make.defs
index 38fc7f5f22a..f4bb09d9914 100644
--- a/configs/olimex-strp711/ostest/Make.defs
+++ b/configs/olimex-strp711/ostest/Make.defs
@@ -40,9 +40,9 @@ include ${TOPDIR}/tools/Config.mk
# make -- Will build for the NuttX buildroot toolchain
# make CROSSDEV=arm-eabi- -- Will build for the devkitARM toolchain
# make CROSSDEV=arm-none-eabi- -- Will build for the CodeSourcery toolchain
-# make CROSSDEV=arm-elf- -- Will build for the NuttX buildroot toolchain
+# make CROSSDEV=arm-nuttx-elf- -- Will build for the NuttX buildroot toolchain
-CROSSDEV = arm-elf-
+CROSSDEV = arm-nuttx-elf-
CC = $(CROSSDEV)gcc
CXX = $(CROSSDEV)g++
CPP = $(CROSSDEV)gcc -E
@@ -63,7 +63,7 @@ OBJCOPYARGS = -R .note -R .note.gnu.build-id -R .comment
endif
endif
-ifeq ($(CROSSDEV),arm-elf-)
+ifeq ($(CROSSDEV),arm-nuttx-elf-)
MKDEP = $(TOPDIR)/tools/mkdeps.sh
ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
@@ -118,7 +118,7 @@ OBJEXT = .o
LIBEXT = .a
EXEEXT =
-ifneq ($(CROSSDEV),arm-elf-)
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
diff --git a/configs/qemu-i486/nsh/Make.defs b/configs/qemu-i486/nsh/Make.defs
index c68d3d34e9f..8b5fe61f65c 100644
--- a/configs/qemu-i486/nsh/Make.defs
+++ b/configs/qemu-i486/nsh/Make.defs
@@ -78,7 +78,7 @@ endif
# Cygwin toolchains don't generate ELF binaries.
ifeq ($(HOSTOS),Cygwin)
-CROSSDEV = i486-elf-
+CROSSDEV = i486-nuttx-elf-
else
CROSSDEV =
endif
diff --git a/configs/qemu-i486/ostest/Make.defs b/configs/qemu-i486/ostest/Make.defs
index fa7dc7bf844..0a2423456ed 100644
--- a/configs/qemu-i486/ostest/Make.defs
+++ b/configs/qemu-i486/ostest/Make.defs
@@ -78,7 +78,7 @@ endif
# Cygwin toolchains don't generate ELF binaries.
ifeq ($(HOSTOS),Cygwin)
-CROSSDEV = i486-elf-
+CROSSDEV = i486-nuttx-elf-
else
CROSSDEV =
endif
diff --git a/configs/sam3u-ek/knsh/Make.defs b/configs/sam3u-ek/knsh/Make.defs
index cce80669a81..bbe8b23c063 100644
--- a/configs/sam3u-ek/knsh/Make.defs
+++ b/configs/sam3u-ek/knsh/Make.defs
@@ -58,7 +58,7 @@ ifeq ($(CONFIG_SAM3U_DEVKITARM),y)
endif
ifeq ($(CONFIG_SAM3U_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
- CROSSDEV = arm-elf-
+ CROSSDEV = arm-nuttx-elf-
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
MAXOPTIMIZATION = -Os
endif
@@ -120,7 +120,7 @@ OBJEXT = .o
LIBEXT = .a
EXEEXT =
-ifneq ($(CROSSDEV),arm-elf-)
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
diff --git a/configs/sam3u-ek/nsh/Make.defs b/configs/sam3u-ek/nsh/Make.defs
index e4f24326d39..0f236114f00 100644
--- a/configs/sam3u-ek/nsh/Make.defs
+++ b/configs/sam3u-ek/nsh/Make.defs
@@ -58,7 +58,7 @@ ifeq ($(CONFIG_SAM3U_DEVKITARM),y)
endif
ifeq ($(CONFIG_SAM3U_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
- CROSSDEV = arm-elf-
+ CROSSDEV = arm-nuttx-elf-
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
MAXOPTIMIZATION = -Os
endif
@@ -120,7 +120,7 @@ OBJEXT = .o
LIBEXT = .a
EXEEXT =
-ifneq ($(CROSSDEV),arm-elf-)
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
diff --git a/configs/sam3u-ek/nx/Make.defs b/configs/sam3u-ek/nx/Make.defs
index e98aaf9d691..10cabe5a56d 100644
--- a/configs/sam3u-ek/nx/Make.defs
+++ b/configs/sam3u-ek/nx/Make.defs
@@ -58,7 +58,7 @@ ifeq ($(CONFIG_SAM3U_DEVKITARM),y)
endif
ifeq ($(CONFIG_SAM3U_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
- CROSSDEV = arm-elf-
+ CROSSDEV = arm-nuttx-elf-
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
MAXOPTIMIZATION = -Os
endif
@@ -120,7 +120,7 @@ OBJEXT = .o
LIBEXT = .a
EXEEXT =
-ifneq ($(CROSSDEV),arm-elf-)
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
diff --git a/configs/sam3u-ek/ostest/Make.defs b/configs/sam3u-ek/ostest/Make.defs
index 7d38aedb2c4..7689fb2a185 100644
--- a/configs/sam3u-ek/ostest/Make.defs
+++ b/configs/sam3u-ek/ostest/Make.defs
@@ -58,7 +58,7 @@ ifeq ($(CONFIG_SAM3U_DEVKITARM),y)
endif
ifeq ($(CONFIG_SAM3U_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
- CROSSDEV = arm-elf-
+ CROSSDEV = arm-nuttx-elf-
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
MAXOPTIMIZATION = -Os
endif
@@ -120,7 +120,7 @@ OBJEXT = .o
LIBEXT = .a
EXEEXT =
-ifneq ($(CROSSDEV),arm-elf-)
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
diff --git a/configs/sam3u-ek/touchscreen/Make.defs b/configs/sam3u-ek/touchscreen/Make.defs
index 1dccbc6bc2c..2047daf6846 100644
--- a/configs/sam3u-ek/touchscreen/Make.defs
+++ b/configs/sam3u-ek/touchscreen/Make.defs
@@ -58,7 +58,7 @@ ifeq ($(CONFIG_SAM3U_DEVKITARM),y)
endif
ifeq ($(CONFIG_SAM3U_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
- CROSSDEV = arm-elf-
+ CROSSDEV = arm-nuttx-elf-
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
MAXOPTIMIZATION = -Os
endif
@@ -120,7 +120,7 @@ OBJEXT = .o
LIBEXT = .a
EXEEXT =
-ifneq ($(CROSSDEV),arm-elf-)
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
diff --git a/configs/shenzhou/nsh/Make.defs b/configs/shenzhou/nsh/Make.defs
index 847866420ac..95495d4c434 100644
--- a/configs/shenzhou/nsh/Make.defs
+++ b/configs/shenzhou/nsh/Make.defs
@@ -82,8 +82,8 @@ ifeq ($(CONFIG_STM32_RAISONANCE),y)
endif
ifeq ($(CONFIG_STM32_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
- CROSSDEV = arm-elf-
- ARCROSSDEV = arm-elf-
+ CROSSDEV = arm-nuttx-elf-
+ ARCROSSDEV = arm-nuttx-elf-
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
MAXOPTIMIZATION = -Os
endif
@@ -153,7 +153,7 @@ OBJEXT = .o
LIBEXT = .a
EXEEXT =
-ifneq ($(CROSSDEV),arm-elf-)
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
diff --git a/configs/shenzhou/nxwm/Make.defs b/configs/shenzhou/nxwm/Make.defs
index 0025282b44e..96e0ffd4b21 100644
--- a/configs/shenzhou/nxwm/Make.defs
+++ b/configs/shenzhou/nxwm/Make.defs
@@ -82,8 +82,8 @@ ifeq ($(CONFIG_STM32_RAISONANCE),y)
endif
ifeq ($(CONFIG_STM32_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
- CROSSDEV = arm-elf-
- ARCROSSDEV = arm-elf-
+ CROSSDEV = arm-nuttx-elf-
+ ARCROSSDEV = arm-nuttx-elf-
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
MAXOPTIMIZATION = -Os
endif
@@ -153,7 +153,7 @@ OBJEXT = .o
LIBEXT = .a
EXEEXT =
-ifneq ($(CROSSDEV),arm-elf-)
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
diff --git a/configs/skp16c26/README.txt b/configs/skp16c26/README.txt
index dc94bbf8d4f..31332b59b6c 100644
--- a/configs/skp16c26/README.txt
+++ b/configs/skp16c26/README.txt
@@ -1,112 +1,112 @@
-configs/skp16c26/README.txt
-^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-1. The buildroot package can be used to build an M16C toolchain. The toolchain
- buildroot can be downloaded from misc/buildroot in the NuttX SVN. Insructions
- for building the toolchain are provided below.
-
- However, the target cannot be built because the GNU m16c-elf-ld link fails with
- the following message:
-
- m32c-elf-ld: BFD (GNU Binutils) 2.19 assertion fail /home/Owner/projects/nuttx/buildroot/toolchain_build_m32c/binutils-2.19/bfd/elf32-m32c.c:482
-
- Where the reference line is:
-
- /* If the symbol is out of range for a 16-bit address,
- we must have allocated a plt entry. */
- BFD_ASSERT (*plt_offset != (bfd_vma) -1);
-
- No workaround is known at this time. This is a show stopper for M16C.
-
-2. A supported version of the M16C toolchain is available here:
-
- http://www.kpitgnutools.com/index.php
-
- This download is free but requires registration. Unfortunately, this v0901 of
- this toolchain shows the same behavior:
-
- c:\Hew3\Tools\KPIT Cummins\GNUM16CM32C-ELF\v0901\m32c-elf\bin\m32c-elf-ld.exe: BFD (GNU Binutils) 2.19-GNUM16CM32C_v0901 assertion fail /home/kpit/fsfsrc/binutils-2.19/bfd/elf32-m32c.c:482
-
-It is possible that this error messasge my be telling me -- a very roundabout way --
-that I have exceeded the FLASH region, but I think that unlikely (it is difficult
-to know if the link does not complete gracefully).
-
-BUILDING THE R8C/M16C/M32C GNU TOOLCHAIN USING BUILDROOT
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-NOTE: See the toolchain issues above -- you may not want to waste your time.
-
-1. CD to the correct directory.
-
- Change to the directory just above the NuttX installation. If is
- where NuttX is installed, then cd to /..
-
-2. Get and Install the buildroot Module
-
- a. Using a release tarball:
-
- cd /..
- Download the appropriate buildroot package.
- unpack the buildroot package
- rename the directory to buildroot
-
- b. Using SVN
-
- Check out the misc/buildroot module. SVN checkout instructions:
-
- svn checkout svn://svn.code.sf.net/p/nuttx/code/trunk/buildroot buildroot
-
- Make the archive directory:
-
- mkdir archive
-
- The /../buildroot is where the toolchain is built;
- The /../archive directory is where toolchain sources will be downloaded.
-
-3. Make sure that NuttX is configured
-
- cd /tools
- ./configure.sh
-
-4. Configure and Make the buildroot
-
- cd buildroot
- cp configs/m32c-defconfig-4.2.4 .config
- make oldconfig
- make
-
- This will download the large source packages for the toolchain and build the toolchain.
- The resulting binaries will be under buildroot/build_m32c. There will also be a
- large build directory called toolchain_build_m32c; this directory can be removed once
- the build completes successfully.
-
-Cygwin GCC BUILD NOTES
-^^^^^^^^^^^^^^^^^^^^^^
- On Cygwin, the buildroot 'make' command will fail with an error like:
-
- "...
- build/genchecksum cc1-dummy > cc1-checksum.c
- opening cc1-dummy: No such file or directory
- ..."
-
- This is caused because on Cygwin, host executables will be generated with the extension .exe
- and, apparently, the make variable "exeext" is set incorrectly. A work around after the
- above occurs is:
-
- cd toolchain_build_m32c/gcc-4.2.4-initial/gcc # Go to the directory where error occurred
- mv cc1-dummy.exe cc1-dummy # Rename the executable without .exe
- rm cc1-checksum.c # Get rid of the bad generated file
-
- Then resume the buildroot make:
-
- cd - # Back to the buildroot make directory
- make # Restart the build
-
- GCC is built twice. First a initial, "bootstap" GCC is produced in
- toolchain_build_m32c/gcc-4.2.4-initial, then the final GCC is produced in
- toolchain_build_m32c/gcc-4.2.4-final. The above error will occur twice: Once for
- the intial GCC build (see above) and once for the final GCC build. For the final GCC
- build, the workaround is the same except that the directory will be
- toolchain_build_m32c/gcc-4.2.4-final/gcc.
-
-
\ No newline at end of file
+configs/skp16c26/README.txt
+^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+1. The buildroot package can be used to build an M16C toolchain. The toolchain
+ buildroot can be downloaded from misc/buildroot in the NuttX SVN. Insructions
+ for building the toolchain are provided below.
+
+ However, the target cannot be built because the GNU m16c-nuttx-elf-ld link fails with
+ the following message:
+
+ m32c-nuttx-elf-ld: BFD (GNU Binutils) 2.19 assertion fail /home/Owner/projects/nuttx/buildroot/toolchain_build_m32c/binutils-2.19/bfd/elf32-m32c.c:482
+
+ Where the reference line is:
+
+ /* If the symbol is out of range for a 16-bit address,
+ we must have allocated a plt entry. */
+ BFD_ASSERT (*plt_offset != (bfd_vma) -1);
+
+ No workaround is known at this time. This is a show stopper for M16C.
+
+2. A supported version of the M16C toolchain is available here:
+
+ http://www.kpitgnutools.com/index.php
+
+ This download is free but requires registration. Unfortunately, this v0901 of
+ this toolchain shows the same behavior:
+
+ c:\Hew3\Tools\KPIT Cummins\GNUM16CM32C-ELF\v0901\m32c-elf\bin\m32c-elf-ld.exe: BFD (GNU Binutils) 2.19-GNUM16CM32C_v0901 assertion fail /home/kpit/fsfsrc/binutils-2.19/bfd/elf32-m32c.c:482
+
+It is possible that this error messasge my be telling me -- a very roundabout way --
+that I have exceeded the FLASH region, but I think that unlikely (it is difficult
+to know if the link does not complete gracefully).
+
+BUILDING THE R8C/M16C/M32C GNU TOOLCHAIN USING BUILDROOT
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+NOTE: See the toolchain issues above -- you may not want to waste your time.
+
+1. CD to the correct directory.
+
+ Change to the directory just above the NuttX installation. If is
+ where NuttX is installed, then cd to /..
+
+2. Get and Install the buildroot Module
+
+ a. Using a release tarball:
+
+ cd /..
+ Download the appropriate buildroot package.
+ unpack the buildroot package
+ rename the directory to buildroot
+
+ b. Using SVN
+
+ Check out the misc/buildroot module. SVN checkout instructions:
+
+ svn checkout svn://svn.code.sf.net/p/nuttx/code/trunk/buildroot buildroot
+
+ Make the archive directory:
+
+ mkdir archive
+
+ The /../buildroot is where the toolchain is built;
+ The /../archive directory is where toolchain sources will be downloaded.
+
+3. Make sure that NuttX is configured
+
+ cd /tools
+ ./configure.sh
+
+4. Configure and Make the buildroot
+
+ cd buildroot
+ cp configs/m32c-defconfig-4.2.4 .config
+ make oldconfig
+ make
+
+ This will download the large source packages for the toolchain and build the toolchain.
+ The resulting binaries will be under buildroot/build_m32c. There will also be a
+ large build directory called toolchain_build_m32c; this directory can be removed once
+ the build completes successfully.
+
+Cygwin GCC BUILD NOTES
+^^^^^^^^^^^^^^^^^^^^^^
+ On Cygwin, the buildroot 'make' command will fail with an error like:
+
+ "...
+ build/genchecksum cc1-dummy > cc1-checksum.c
+ opening cc1-dummy: No such file or directory
+ ..."
+
+ This is caused because on Cygwin, host executables will be generated with the extension .exe
+ and, apparently, the make variable "exeext" is set incorrectly. A work around after the
+ above occurs is:
+
+ cd toolchain_build_m32c/gcc-4.2.4-initial/gcc # Go to the directory where error occurred
+ mv cc1-dummy.exe cc1-dummy # Rename the executable without .exe
+ rm cc1-checksum.c # Get rid of the bad generated file
+
+ Then resume the buildroot make:
+
+ cd - # Back to the buildroot make directory
+ make # Restart the build
+
+ GCC is built twice. First a initial, "bootstap" GCC is produced in
+ toolchain_build_m32c/gcc-4.2.4-initial, then the final GCC is produced in
+ toolchain_build_m32c/gcc-4.2.4-final. The above error will occur twice: Once for
+ the intial GCC build (see above) and once for the final GCC build. For the final GCC
+ build, the workaround is the same except that the directory will be
+ toolchain_build_m32c/gcc-4.2.4-final/gcc.
+
+
diff --git a/configs/skp16c26/ostest/Make.defs b/configs/skp16c26/ostest/Make.defs
index 79f01401331..a7444daae34 100644
--- a/configs/skp16c26/ostest/Make.defs
+++ b/configs/skp16c26/ostest/Make.defs
@@ -36,7 +36,7 @@
include ${TOPDIR}/.config
include ${TOPDIR}/tools/Config.mk
-CROSSDEV = m32c-elf-
+CROSSDEV = m32c-nuttx-elf-
CC = $(CROSSDEV)gcc
CPP = $(CROSSDEV)gcc -E
LD = $(CROSSDEV)ld
diff --git a/configs/stm3210e-eval/RIDE/Make.defs b/configs/stm3210e-eval/RIDE/Make.defs
index f24075038d7..dfd0f600b77 100644
--- a/configs/stm3210e-eval/RIDE/Make.defs
+++ b/configs/stm3210e-eval/RIDE/Make.defs
@@ -70,7 +70,7 @@ ifeq ($(CONFIG_STM32_RAISONANCE),y)
endif
ifeq ($(CONFIG_STM32_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
- CROSSDEV = arm-elf-
+ CROSSDEV = arm-nuttx-elf-
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
MAXOPTIMIZATION = -Os
endif
@@ -132,7 +132,7 @@ OBJEXT = .o
LIBEXT = .a
EXEEXT =
-ifneq ($(CROSSDEV),arm-elf-)
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
diff --git a/configs/stm3210e-eval/buttons/Make.defs b/configs/stm3210e-eval/buttons/Make.defs
index ed7d6e7f000..9f0691bba82 100644
--- a/configs/stm3210e-eval/buttons/Make.defs
+++ b/configs/stm3210e-eval/buttons/Make.defs
@@ -70,7 +70,7 @@ ifeq ($(CONFIG_STM32_RAISONANCE),y)
endif
ifeq ($(CONFIG_STM32_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
- CROSSDEV = arm-elf-
+ CROSSDEV = arm-nuttx-elf-
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
MAXOPTIMIZATION = -Os
endif
@@ -132,7 +132,7 @@ OBJEXT = .o
LIBEXT = .a
EXEEXT =
-ifneq ($(CROSSDEV),arm-elf-)
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
diff --git a/configs/stm3210e-eval/composite/Make.defs b/configs/stm3210e-eval/composite/Make.defs
index e0846642984..9b855671f30 100644
--- a/configs/stm3210e-eval/composite/Make.defs
+++ b/configs/stm3210e-eval/composite/Make.defs
@@ -70,7 +70,7 @@ ifeq ($(CONFIG_STM32_RAISONANCE),y)
endif
ifeq ($(CONFIG_STM32_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
- CROSSDEV = arm-elf-
+ CROSSDEV = arm-nuttx-elf-
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
MAXOPTIMIZATION = -Os
endif
@@ -132,7 +132,7 @@ OBJEXT = .o
LIBEXT = .a
EXEEXT =
-ifneq ($(CROSSDEV),arm-elf-)
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
diff --git a/configs/stm3210e-eval/nsh/Make.defs b/configs/stm3210e-eval/nsh/Make.defs
index 1e8e945b64d..afdf0c09719 100644
--- a/configs/stm3210e-eval/nsh/Make.defs
+++ b/configs/stm3210e-eval/nsh/Make.defs
@@ -70,7 +70,7 @@ ifeq ($(CONFIG_STM32_RAISONANCE),y)
endif
ifeq ($(CONFIG_STM32_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
- CROSSDEV = arm-elf-
+ CROSSDEV = arm-nuttx-elf-
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
MAXOPTIMIZATION = -Os
endif
@@ -132,7 +132,7 @@ OBJEXT = .o
LIBEXT = .a
EXEEXT =
-ifneq ($(CROSSDEV),arm-elf-)
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
diff --git a/configs/stm3210e-eval/nsh2/Make.defs b/configs/stm3210e-eval/nsh2/Make.defs
index 049c9d7a808..7d36c9a00d5 100644
--- a/configs/stm3210e-eval/nsh2/Make.defs
+++ b/configs/stm3210e-eval/nsh2/Make.defs
@@ -70,7 +70,7 @@ ifeq ($(CONFIG_STM32_RAISONANCE),y)
endif
ifeq ($(CONFIG_STM32_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
- CROSSDEV = arm-elf-
+ CROSSDEV = arm-nuttx-elf-
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
MAXOPTIMIZATION = -Os
endif
@@ -132,7 +132,7 @@ OBJEXT = .o
LIBEXT = .a
EXEEXT =
-ifneq ($(CROSSDEV),arm-elf-)
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
diff --git a/configs/stm3210e-eval/nx/Make.defs b/configs/stm3210e-eval/nx/Make.defs
index a553e016304..bb0ba5b6dff 100644
--- a/configs/stm3210e-eval/nx/Make.defs
+++ b/configs/stm3210e-eval/nx/Make.defs
@@ -70,7 +70,7 @@ ifeq ($(CONFIG_STM32_RAISONANCE),y)
endif
ifeq ($(CONFIG_STM32_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
- CROSSDEV = arm-elf-
+ CROSSDEV = arm-nuttx-elf-
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
MAXOPTIMIZATION = -Os
endif
@@ -132,7 +132,7 @@ OBJEXT = .o
LIBEXT = .a
EXEEXT =
-ifneq ($(CROSSDEV),arm-elf-)
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
diff --git a/configs/stm3210e-eval/nxconsole/Make.defs b/configs/stm3210e-eval/nxconsole/Make.defs
index d55f4c61d44..84b36b26766 100644
--- a/configs/stm3210e-eval/nxconsole/Make.defs
+++ b/configs/stm3210e-eval/nxconsole/Make.defs
@@ -73,7 +73,7 @@ ifeq ($(CONFIG_STM32_RAISONANCE),y)
endif
ifeq ($(CONFIG_STM32_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
- CROSSDEV = arm-elf-
+ CROSSDEV = arm-nuttx-elf-
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
MAXOPTIMIZATION = -Os
endif
@@ -134,7 +134,7 @@ OBJEXT = .o
LIBEXT = .a
EXEEXT =
-ifneq ($(CROSSDEV),arm-elf-)
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
diff --git a/configs/stm3210e-eval/nxlines/Make.defs b/configs/stm3210e-eval/nxlines/Make.defs
index 83bd9eb5e8d..a896a901e6f 100644
--- a/configs/stm3210e-eval/nxlines/Make.defs
+++ b/configs/stm3210e-eval/nxlines/Make.defs
@@ -73,7 +73,7 @@ ifeq ($(CONFIG_STM32_RAISONANCE),y)
endif
ifeq ($(CONFIG_STM32_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
- CROSSDEV = arm-elf-
+ CROSSDEV = arm-nuttx-elf-
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
MAXOPTIMIZATION = -Os
endif
@@ -134,7 +134,7 @@ OBJEXT = .o
LIBEXT = .a
EXEEXT =
-ifneq ($(CROSSDEV),arm-elf-)
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
diff --git a/configs/stm3210e-eval/nxtext/Make.defs b/configs/stm3210e-eval/nxtext/Make.defs
index 4a082fc745b..00370c3b0f7 100644
--- a/configs/stm3210e-eval/nxtext/Make.defs
+++ b/configs/stm3210e-eval/nxtext/Make.defs
@@ -73,7 +73,7 @@ ifeq ($(CONFIG_STM32_RAISONANCE),y)
endif
ifeq ($(CONFIG_STM32_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
- CROSSDEV = arm-elf-
+ CROSSDEV = arm-nuttx-elf-
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
MAXOPTIMIZATION = -Os
endif
@@ -134,7 +134,7 @@ OBJEXT = .o
LIBEXT = .a
EXEEXT =
-ifneq ($(CROSSDEV),arm-elf-)
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
diff --git a/configs/stm3210e-eval/ostest/Make.defs b/configs/stm3210e-eval/ostest/Make.defs
index 41a1974570c..09b3f039543 100644
--- a/configs/stm3210e-eval/ostest/Make.defs
+++ b/configs/stm3210e-eval/ostest/Make.defs
@@ -70,7 +70,7 @@ ifeq ($(CONFIG_STM32_RAISONANCE),y)
endif
ifeq ($(CONFIG_STM32_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
- CROSSDEV = arm-elf-
+ CROSSDEV = arm-nuttx-elf-
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
MAXOPTIMIZATION = -Os
endif
@@ -132,7 +132,7 @@ OBJEXT = .o
LIBEXT = .a
EXEEXT =
-ifneq ($(CROSSDEV),arm-elf-)
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
diff --git a/configs/stm3210e-eval/pm/Make.defs b/configs/stm3210e-eval/pm/Make.defs
index c298c4364bf..0cc96fa4ee3 100644
--- a/configs/stm3210e-eval/pm/Make.defs
+++ b/configs/stm3210e-eval/pm/Make.defs
@@ -70,7 +70,7 @@ ifeq ($(CONFIG_STM32_RAISONANCE),y)
endif
ifeq ($(CONFIG_STM32_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
- CROSSDEV = arm-elf-
+ CROSSDEV = arm-nuttx-elf-
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
MAXOPTIMIZATION = -Os
endif
@@ -132,7 +132,7 @@ OBJEXT = .o
LIBEXT = .a
EXEEXT =
-ifneq ($(CROSSDEV),arm-elf-)
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
diff --git a/configs/stm3210e-eval/usbserial/Make.defs b/configs/stm3210e-eval/usbserial/Make.defs
index f45de369e98..cda6edf4ee1 100644
--- a/configs/stm3210e-eval/usbserial/Make.defs
+++ b/configs/stm3210e-eval/usbserial/Make.defs
@@ -70,7 +70,7 @@ ifeq ($(CONFIG_STM32_RAISONANCE),y)
endif
ifeq ($(CONFIG_STM32_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
- CROSSDEV = arm-elf-
+ CROSSDEV = arm-nuttx-elf-
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
MAXOPTIMIZATION = -Os
endif
@@ -132,7 +132,7 @@ OBJEXT = .o
LIBEXT = .a
EXEEXT =
-ifneq ($(CROSSDEV),arm-elf-)
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
diff --git a/configs/stm3210e-eval/usbstorage/Make.defs b/configs/stm3210e-eval/usbstorage/Make.defs
index e0a4de6f9ea..36688bc8059 100644
--- a/configs/stm3210e-eval/usbstorage/Make.defs
+++ b/configs/stm3210e-eval/usbstorage/Make.defs
@@ -70,7 +70,7 @@ ifeq ($(CONFIG_STM32_RAISONANCE),y)
endif
ifeq ($(CONFIG_STM32_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
- CROSSDEV = arm-elf-
+ CROSSDEV = arm-nuttx-elf-
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
MAXOPTIMIZATION = -Os
endif
@@ -132,7 +132,7 @@ OBJEXT = .o
LIBEXT = .a
EXEEXT =
-ifneq ($(CROSSDEV),arm-elf-)
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
diff --git a/configs/stm3220g-eval/dhcpd/Make.defs b/configs/stm3220g-eval/dhcpd/Make.defs
index 4a94997a5c1..f75e94501f4 100644
--- a/configs/stm3220g-eval/dhcpd/Make.defs
+++ b/configs/stm3220g-eval/dhcpd/Make.defs
@@ -90,8 +90,8 @@ ifeq ($(CONFIG_STM32_RAISONANCE),y)
endif
ifeq ($(CONFIG_STM32_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
- CROSSDEV = arm-elf-
- ARCROSSDEV = arm-elf-
+ CROSSDEV = arm-nuttx-elf-
+ ARCROSSDEV = arm-nuttx-elf-
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
MAXOPTIMIZATION = -Os
endif
@@ -155,7 +155,7 @@ OBJEXT = .o
LIBEXT = .a
EXEEXT =
-ifneq ($(CROSSDEV),arm-elf-)
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
diff --git a/configs/stm3220g-eval/nettest/Make.defs b/configs/stm3220g-eval/nettest/Make.defs
index c69852119f3..f307d9475df 100644
--- a/configs/stm3220g-eval/nettest/Make.defs
+++ b/configs/stm3220g-eval/nettest/Make.defs
@@ -90,8 +90,8 @@ ifeq ($(CONFIG_STM32_RAISONANCE),y)
endif
ifeq ($(CONFIG_STM32_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
- CROSSDEV = arm-elf-
- ARCROSSDEV = arm-elf-
+ CROSSDEV = arm-nuttx-elf-
+ ARCROSSDEV = arm-nuttx-elf-
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
MAXOPTIMIZATION = -Os
endif
@@ -155,7 +155,7 @@ OBJEXT = .o
LIBEXT = .a
EXEEXT =
-ifneq ($(CROSSDEV),arm-elf-)
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
diff --git a/configs/stm3220g-eval/nsh/Make.defs b/configs/stm3220g-eval/nsh/Make.defs
index 4b2bbef30a2..9fe8b0ffabf 100644
--- a/configs/stm3220g-eval/nsh/Make.defs
+++ b/configs/stm3220g-eval/nsh/Make.defs
@@ -90,8 +90,8 @@ ifeq ($(CONFIG_STM32_RAISONANCE),y)
endif
ifeq ($(CONFIG_STM32_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
- CROSSDEV = arm-elf-
- ARCROSSDEV = arm-elf-
+ CROSSDEV = arm-nuttx-elf-
+ ARCROSSDEV = arm-nuttx-elf-
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
MAXOPTIMIZATION = -Os
endif
@@ -155,7 +155,7 @@ OBJEXT = .o
LIBEXT = .a
EXEEXT =
-ifneq ($(CROSSDEV),arm-elf-)
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
diff --git a/configs/stm3220g-eval/nsh2/Make.defs b/configs/stm3220g-eval/nsh2/Make.defs
index d813508680f..64f158ecb57 100644
--- a/configs/stm3220g-eval/nsh2/Make.defs
+++ b/configs/stm3220g-eval/nsh2/Make.defs
@@ -90,8 +90,8 @@ ifeq ($(CONFIG_STM32_RAISONANCE),y)
endif
ifeq ($(CONFIG_STM32_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
- CROSSDEV = arm-elf-
- ARCROSSDEV = arm-elf-
+ CROSSDEV = arm-nuttx-elf-
+ ARCROSSDEV = arm-nuttx-elf-
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
MAXOPTIMIZATION = -Os
endif
@@ -155,7 +155,7 @@ OBJEXT = .o
LIBEXT = .a
EXEEXT =
-ifneq ($(CROSSDEV),arm-elf-)
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
diff --git a/configs/stm3220g-eval/nxwm/Make.defs b/configs/stm3220g-eval/nxwm/Make.defs
index 616529e7e26..37280e0c448 100644
--- a/configs/stm3220g-eval/nxwm/Make.defs
+++ b/configs/stm3220g-eval/nxwm/Make.defs
@@ -90,8 +90,8 @@ ifeq ($(CONFIG_STM32_RAISONANCE),y)
endif
ifeq ($(CONFIG_STM32_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
- CROSSDEV = arm-elf-
- ARCROSSDEV = arm-elf-
+ CROSSDEV = arm-nuttx-elf-
+ ARCROSSDEV = arm-nuttx-elf-
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
MAXOPTIMIZATION = -Os
endif
@@ -155,7 +155,7 @@ OBJEXT = .o
LIBEXT = .a
EXEEXT =
-ifneq ($(CROSSDEV),arm-elf-)
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
diff --git a/configs/stm3220g-eval/ostest/Make.defs b/configs/stm3220g-eval/ostest/Make.defs
index 9d8c07dfa25..41e8fff1424 100644
--- a/configs/stm3220g-eval/ostest/Make.defs
+++ b/configs/stm3220g-eval/ostest/Make.defs
@@ -90,8 +90,8 @@ ifeq ($(CONFIG_STM32_RAISONANCE),y)
endif
ifeq ($(CONFIG_STM32_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
- CROSSDEV = arm-elf-
- ARCROSSDEV = arm-elf-
+ CROSSDEV = arm-nuttx-elf-
+ ARCROSSDEV = arm-nuttx-elf-
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
MAXOPTIMIZATION = -Os
endif
@@ -155,7 +155,7 @@ OBJEXT = .o
LIBEXT = .a
EXEEXT =
-ifneq ($(CROSSDEV),arm-elf-)
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
diff --git a/configs/stm3220g-eval/telnetd/Make.defs b/configs/stm3220g-eval/telnetd/Make.defs
index 10725d72790..416bfaa47b1 100644
--- a/configs/stm3220g-eval/telnetd/Make.defs
+++ b/configs/stm3220g-eval/telnetd/Make.defs
@@ -90,8 +90,8 @@ ifeq ($(CONFIG_STM32_RAISONANCE),y)
endif
ifeq ($(CONFIG_STM32_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
- CROSSDEV = arm-elf-
- ARCROSSDEV = arm-elf-
+ CROSSDEV = arm-nuttx-elf-
+ ARCROSSDEV = arm-nuttx-elf-
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
MAXOPTIMIZATION = -Os
endif
@@ -155,7 +155,7 @@ OBJEXT = .o
LIBEXT = .a
EXEEXT =
-ifneq ($(CROSSDEV),arm-elf-)
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
diff --git a/configs/stm3240g-eval/dhcpd/Make.defs b/configs/stm3240g-eval/dhcpd/Make.defs
index 7fb1e0b7f81..1c7a7cff0e9 100644
--- a/configs/stm3240g-eval/dhcpd/Make.defs
+++ b/configs/stm3240g-eval/dhcpd/Make.defs
@@ -90,8 +90,8 @@ ifeq ($(CONFIG_STM32_RAISONANCE),y)
endif
ifeq ($(CONFIG_STM32_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
- CROSSDEV = arm-elf-
- ARCROSSDEV = arm-elf-
+ CROSSDEV = arm-nuttx-elf-
+ ARCROSSDEV = arm-nuttx-elf-
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
MAXOPTIMIZATION = -Os
endif
@@ -155,7 +155,7 @@ OBJEXT = .o
LIBEXT = .a
EXEEXT =
-ifneq ($(CROSSDEV),arm-elf-)
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
diff --git a/configs/stm3240g-eval/discover/Make.defs b/configs/stm3240g-eval/discover/Make.defs
index abcae0f5f06..9cf9d595852 100644
--- a/configs/stm3240g-eval/discover/Make.defs
+++ b/configs/stm3240g-eval/discover/Make.defs
@@ -90,8 +90,8 @@ ifeq ($(CONFIG_STM32_RAISONANCE),y)
endif
ifeq ($(CONFIG_STM32_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
- CROSSDEV = arm-elf-
- ARCROSSDEV = arm-elf-
+ CROSSDEV = arm-nuttx-elf-
+ ARCROSSDEV = arm-nuttx-elf-
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
MAXOPTIMIZATION = -Os
endif
@@ -155,7 +155,7 @@ OBJEXT = .o
LIBEXT = .a
EXEEXT =
-ifneq ($(CROSSDEV),arm-elf-)
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
diff --git a/configs/stm3240g-eval/nettest/Make.defs b/configs/stm3240g-eval/nettest/Make.defs
index a0a1cd58fd9..e8af4cbb5dc 100644
--- a/configs/stm3240g-eval/nettest/Make.defs
+++ b/configs/stm3240g-eval/nettest/Make.defs
@@ -90,8 +90,8 @@ ifeq ($(CONFIG_STM32_RAISONANCE),y)
endif
ifeq ($(CONFIG_STM32_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
- CROSSDEV = arm-elf-
- ARCROSSDEV = arm-elf-
+ CROSSDEV = arm-nuttx-elf-
+ ARCROSSDEV = arm-nuttx-elf-
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
MAXOPTIMIZATION = -Os
endif
@@ -155,7 +155,7 @@ OBJEXT = .o
LIBEXT = .a
EXEEXT =
-ifneq ($(CROSSDEV),arm-elf-)
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
diff --git a/configs/stm3240g-eval/nsh/Make.defs b/configs/stm3240g-eval/nsh/Make.defs
index ab0ede05e67..e88f1054b4e 100644
--- a/configs/stm3240g-eval/nsh/Make.defs
+++ b/configs/stm3240g-eval/nsh/Make.defs
@@ -90,8 +90,8 @@ ifeq ($(CONFIG_STM32_RAISONANCE),y)
endif
ifeq ($(CONFIG_STM32_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
- CROSSDEV = arm-elf-
- ARCROSSDEV = arm-elf-
+ CROSSDEV = arm-nuttx-elf-
+ ARCROSSDEV = arm-nuttx-elf-
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
MAXOPTIMIZATION = -Os
endif
@@ -155,7 +155,7 @@ OBJEXT = .o
LIBEXT = .a
EXEEXT =
-ifneq ($(CROSSDEV),arm-elf-)
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
diff --git a/configs/stm3240g-eval/nsh2/Make.defs b/configs/stm3240g-eval/nsh2/Make.defs
index 7a0e19582f0..3e7fa8bd2ab 100644
--- a/configs/stm3240g-eval/nsh2/Make.defs
+++ b/configs/stm3240g-eval/nsh2/Make.defs
@@ -90,8 +90,8 @@ ifeq ($(CONFIG_STM32_RAISONANCE),y)
endif
ifeq ($(CONFIG_STM32_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
- CROSSDEV = arm-elf-
- ARCROSSDEV = arm-elf-
+ CROSSDEV = arm-nuttx-elf-
+ ARCROSSDEV = arm-nuttx-elf-
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
MAXOPTIMIZATION = -Os
endif
@@ -155,7 +155,7 @@ OBJEXT = .o
LIBEXT = .a
EXEEXT =
-ifneq ($(CROSSDEV),arm-elf-)
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
diff --git a/configs/stm3240g-eval/nxconsole/Make.defs b/configs/stm3240g-eval/nxconsole/Make.defs
index 6c200d3ce03..aedfacc80ac 100644
--- a/configs/stm3240g-eval/nxconsole/Make.defs
+++ b/configs/stm3240g-eval/nxconsole/Make.defs
@@ -90,8 +90,8 @@ ifeq ($(CONFIG_STM32_RAISONANCE),y)
endif
ifeq ($(CONFIG_STM32_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
- CROSSDEV = arm-elf-
- ARCROSSDEV = arm-elf-
+ CROSSDEV = arm-nuttx-elf-
+ ARCROSSDEV = arm-nuttx-elf-
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
MAXOPTIMIZATION = -Os
endif
@@ -155,7 +155,7 @@ OBJEXT = .o
LIBEXT = .a
EXEEXT =
-ifneq ($(CROSSDEV),arm-elf-)
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
diff --git a/configs/stm3240g-eval/nxwm/Make.defs b/configs/stm3240g-eval/nxwm/Make.defs
index 167792094ff..631cfab861f 100644
--- a/configs/stm3240g-eval/nxwm/Make.defs
+++ b/configs/stm3240g-eval/nxwm/Make.defs
@@ -90,8 +90,8 @@ ifeq ($(CONFIG_STM32_RAISONANCE),y)
endif
ifeq ($(CONFIG_STM32_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
- CROSSDEV = arm-elf-
- ARCROSSDEV = arm-elf-
+ CROSSDEV = arm-nuttx-elf-
+ ARCROSSDEV = arm-nuttx-elf-
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
MAXOPTIMIZATION = -Os
endif
@@ -155,7 +155,7 @@ OBJEXT = .o
LIBEXT = .a
EXEEXT =
-ifneq ($(CROSSDEV),arm-elf-)
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
diff --git a/configs/stm3240g-eval/ostest/Make.defs b/configs/stm3240g-eval/ostest/Make.defs
index a7e7a1392db..875d39f22d7 100644
--- a/configs/stm3240g-eval/ostest/Make.defs
+++ b/configs/stm3240g-eval/ostest/Make.defs
@@ -90,8 +90,8 @@ ifeq ($(CONFIG_STM32_RAISONANCE),y)
endif
ifeq ($(CONFIG_STM32_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
- CROSSDEV = arm-elf-
- ARCROSSDEV = arm-elf-
+ CROSSDEV = arm-nuttx-elf-
+ ARCROSSDEV = arm-nuttx-elf-
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
MAXOPTIMIZATION = -Os
endif
@@ -155,7 +155,7 @@ OBJEXT = .o
LIBEXT = .a
EXEEXT =
-ifneq ($(CROSSDEV),arm-elf-)
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
diff --git a/configs/stm3240g-eval/telnetd/Make.defs b/configs/stm3240g-eval/telnetd/Make.defs
index 1ddbddaabd3..d0ed37f28d7 100644
--- a/configs/stm3240g-eval/telnetd/Make.defs
+++ b/configs/stm3240g-eval/telnetd/Make.defs
@@ -90,8 +90,8 @@ ifeq ($(CONFIG_STM32_RAISONANCE),y)
endif
ifeq ($(CONFIG_STM32_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
- CROSSDEV = arm-elf-
- ARCROSSDEV = arm-elf-
+ CROSSDEV = arm-nuttx-elf-
+ ARCROSSDEV = arm-nuttx-elf-
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
MAXOPTIMIZATION = -Os
endif
@@ -155,7 +155,7 @@ OBJEXT = .o
LIBEXT = .a
EXEEXT =
-ifneq ($(CROSSDEV),arm-elf-)
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
diff --git a/configs/stm3240g-eval/webserver/Make.defs b/configs/stm3240g-eval/webserver/Make.defs
index 0669350803c..fbe1ffb0ecd 100644
--- a/configs/stm3240g-eval/webserver/Make.defs
+++ b/configs/stm3240g-eval/webserver/Make.defs
@@ -89,8 +89,8 @@ ifeq ($(CONFIG_STM32_RAISONANCE),y)
endif
ifeq ($(CONFIG_STM32_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
- CROSSDEV = arm-elf-
- ARCROSSDEV = arm-elf-
+ CROSSDEV = arm-nuttx-elf-
+ ARCROSSDEV = arm-nuttx-elf-
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
MAXOPTIMIZATION = -Os
endif
@@ -154,7 +154,7 @@ OBJEXT = .o
LIBEXT = .a
EXEEXT =
-ifneq ($(CROSSDEV),arm-elf-)
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
diff --git a/configs/stm3240g-eval/xmlrpc/Make.defs b/configs/stm3240g-eval/xmlrpc/Make.defs
index eb02622e668..61b0d5c4e46 100644
--- a/configs/stm3240g-eval/xmlrpc/Make.defs
+++ b/configs/stm3240g-eval/xmlrpc/Make.defs
@@ -90,8 +90,8 @@ ifeq ($(CONFIG_STM32_RAISONANCE),y)
endif
ifeq ($(CONFIG_STM32_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
- CROSSDEV = arm-elf-
- ARCROSSDEV = arm-elf-
+ CROSSDEV = arm-nuttx-elf-
+ ARCROSSDEV = arm-nuttx-elf-
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
MAXOPTIMIZATION = -Os
endif
@@ -155,7 +155,7 @@ OBJEXT = .o
LIBEXT = .a
EXEEXT =
-ifneq ($(CROSSDEV),arm-elf-)
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
diff --git a/configs/stm32f4discovery/nsh/Make.defs b/configs/stm32f4discovery/nsh/Make.defs
index 4a776bffe54..f4110cce3eb 100644
--- a/configs/stm32f4discovery/nsh/Make.defs
+++ b/configs/stm32f4discovery/nsh/Make.defs
@@ -90,8 +90,8 @@ ifeq ($(CONFIG_STM32_RAISONANCE),y)
endif
ifeq ($(CONFIG_STM32_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
- CROSSDEV = arm-elf-
- ARCROSSDEV = arm-elf-
+ CROSSDEV = arm-nuttx-elf-
+ ARCROSSDEV = arm-nuttx-elf-
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
MAXOPTIMIZATION = -Os
endif
@@ -155,7 +155,7 @@ OBJEXT = .o
LIBEXT = .a
EXEEXT =
-ifneq ($(CROSSDEV),arm-elf-)
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
diff --git a/configs/stm32f4discovery/nxlines/Make.defs b/configs/stm32f4discovery/nxlines/Make.defs
index c728da7b3c8..8dab2009ceb 100644
--- a/configs/stm32f4discovery/nxlines/Make.defs
+++ b/configs/stm32f4discovery/nxlines/Make.defs
@@ -90,8 +90,8 @@ ifeq ($(CONFIG_STM32_RAISONANCE),y)
endif
ifeq ($(CONFIG_STM32_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
- CROSSDEV = arm-elf-
- ARCROSSDEV = arm-elf-
+ CROSSDEV = arm-nuttx-elf-
+ ARCROSSDEV = arm-nuttx-elf-
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
MAXOPTIMIZATION = -Os
endif
@@ -155,7 +155,7 @@ OBJEXT = .o
LIBEXT = .a
EXEEXT =
-ifneq ($(CROSSDEV),arm-elf-)
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
diff --git a/configs/stm32f4discovery/ostest/Make.defs b/configs/stm32f4discovery/ostest/Make.defs
index 7ee43758937..f20fddb8437 100644
--- a/configs/stm32f4discovery/ostest/Make.defs
+++ b/configs/stm32f4discovery/ostest/Make.defs
@@ -90,8 +90,8 @@ ifeq ($(CONFIG_STM32_RAISONANCE),y)
endif
ifeq ($(CONFIG_STM32_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
- CROSSDEV = arm-elf-
- ARCROSSDEV = arm-elf-
+ CROSSDEV = arm-nuttx-elf-
+ ARCROSSDEV = arm-nuttx-elf-
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
MAXOPTIMIZATION = -Os
endif
@@ -155,7 +155,7 @@ OBJEXT = .o
LIBEXT = .a
EXEEXT =
-ifneq ($(CROSSDEV),arm-elf-)
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
diff --git a/configs/stm32f4discovery/pm/Make.defs b/configs/stm32f4discovery/pm/Make.defs
index 8dc63684e25..f96f439ee44 100644
--- a/configs/stm32f4discovery/pm/Make.defs
+++ b/configs/stm32f4discovery/pm/Make.defs
@@ -90,8 +90,8 @@ ifeq ($(CONFIG_STM32_RAISONANCE),y)
endif
ifeq ($(CONFIG_STM32_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
- CROSSDEV = arm-elf-
- ARCROSSDEV = arm-elf-
+ CROSSDEV = arm-nuttx-elf-
+ ARCROSSDEV = arm-nuttx-elf-
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
MAXOPTIMIZATION = -Os
endif
@@ -155,7 +155,7 @@ OBJEXT = .o
LIBEXT = .a
EXEEXT =
-ifneq ($(CROSSDEV),arm-elf-)
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
diff --git a/configs/teensy/hello/Make.defs b/configs/teensy/hello/Make.defs
index 72d51de14b5..cca88363cd5 100644
--- a/configs/teensy/hello/Make.defs
+++ b/configs/teensy/hello/Make.defs
@@ -57,7 +57,7 @@ endif
ifeq ($(CONFIG_AVR_BUILDROOT),y)
# NuttX buildroot GCC toolchain under Linux or Cygwin
- CROSSDEV = avr-elf-
+ CROSSDEV = avr-nuttx-elf-
MAXOPTIMIZATION = -O2
ARCHCPUFLAGS = -mmcu=at90usb1286
LDFLAGS += -nostartfiles -nodefaultlibs
diff --git a/configs/teensy/nsh/Make.defs b/configs/teensy/nsh/Make.defs
index e58b1596ec8..13f8e790270 100644
--- a/configs/teensy/nsh/Make.defs
+++ b/configs/teensy/nsh/Make.defs
@@ -57,7 +57,7 @@ endif
ifeq ($(CONFIG_AVR_BUILDROOT),y)
# NuttX buildroot GCC toolchain under Linux or Cygwin
- CROSSDEV = avr-elf-
+ CROSSDEV = avr-nuttx-elf-
MAXOPTIMIZATION = -O2
ARCHCPUFLAGS = -mmcu=at90usb1286
LDFLAGS += -nostartfiles -nodefaultlibs
diff --git a/configs/teensy/usbstorage/Make.defs b/configs/teensy/usbstorage/Make.defs
index b221491d646..706daf81f6a 100644
--- a/configs/teensy/usbstorage/Make.defs
+++ b/configs/teensy/usbstorage/Make.defs
@@ -57,7 +57,7 @@ endif
ifeq ($(CONFIG_AVR_BUILDROOT),y)
# NuttX buildroot GCC toolchain under Linux or Cygwin
- CROSSDEV = avr-elf-
+ CROSSDEV = avr-nuttx-elf-
MAXOPTIMIZATION = -O2
ARCHCPUFLAGS = -mmcu=at90usb1286
LDFLAGS += -nostartfiles -nodefaultlibs
diff --git a/configs/twr-k60n512/nsh/Make.defs b/configs/twr-k60n512/nsh/Make.defs
index ebeea90a54d..99041bcc29f 100644
--- a/configs/twr-k60n512/nsh/Make.defs
+++ b/configs/twr-k60n512/nsh/Make.defs
@@ -58,7 +58,7 @@ ifeq ($(CONFIG_KINETIS_DEVKITARM),y)
endif
ifeq ($(CONFIG_KINETIS_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
- CROSSDEV = arm-elf-
+ CROSSDEV = arm-nuttx-elf-
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft -mlong-calls
MAXOPTIMIZATION = -Os
endif
@@ -120,7 +120,7 @@ OBJEXT = .o
LIBEXT = .a
EXEEXT =
-ifneq ($(CROSSDEV),arm-elf-)
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
diff --git a/configs/twr-k60n512/ostest/Make.defs b/configs/twr-k60n512/ostest/Make.defs
index 2f5e208fe52..93c887a2d6a 100644
--- a/configs/twr-k60n512/ostest/Make.defs
+++ b/configs/twr-k60n512/ostest/Make.defs
@@ -58,7 +58,7 @@ ifeq ($(CONFIG_KINETIS_DEVKITARM),y)
endif
ifeq ($(CONFIG_KINETIS_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
- CROSSDEV = arm-elf-
+ CROSSDEV = arm-nuttx-elf-
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft -mlong-calls
MAXOPTIMIZATION = -Os
endif
@@ -120,7 +120,7 @@ OBJEXT = .o
LIBEXT = .a
EXEEXT =
-ifneq ($(CROSSDEV),arm-elf-)
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
diff --git a/configs/us7032evb1/nsh/Make.defs b/configs/us7032evb1/nsh/Make.defs
index d861f5d48dc..9cbc41f5b91 100644
--- a/configs/us7032evb1/nsh/Make.defs
+++ b/configs/us7032evb1/nsh/Make.defs
@@ -50,7 +50,7 @@ ARCHDEFINES =
ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/nsh/ld.script
-CROSSDEV = sh-elf-
+CROSSDEV = sh-nuttx-elf-
CC = $(CROSSDEV)gcc
CPP = $(CROSSDEV)gcc -E
LD = $(CROSSDEV)ld
diff --git a/configs/us7032evb1/ostest/Make.defs b/configs/us7032evb1/ostest/Make.defs
index 580c126286b..32f45eddab8 100644
--- a/configs/us7032evb1/ostest/Make.defs
+++ b/configs/us7032evb1/ostest/Make.defs
@@ -50,7 +50,7 @@ ARCHDEFINES =
ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/ostest/ld.script
-CROSSDEV = sh-elf-
+CROSSDEV = sh-nuttx-elf-
CC = $(CROSSDEV)gcc
CPP = $(CROSSDEV)gcc -E
LD = $(CROSSDEV)ld
diff --git a/configs/vsn/nsh/Make.defs b/configs/vsn/nsh/Make.defs
index 15de85f6052..abcdf49c16b 100644
--- a/configs/vsn/nsh/Make.defs
+++ b/configs/vsn/nsh/Make.defs
@@ -70,7 +70,7 @@ ifeq ($(CONFIG_STM32_RAISONANCE),y)
endif
ifeq ($(CONFIG_STM32_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
- CROSSDEV = arm-elf-
+ CROSSDEV = arm-nuttx-elf-
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
MAXOPTIMIZATION = -Os
endif
@@ -132,7 +132,7 @@ OBJEXT = .o
LIBEXT = .a
EXEEXT =
-ifneq ($(CROSSDEV),arm-elf-)
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
| | | |