Mirrors_Framework/nuttx
1
0
Fork 0
mirror of https://github.com/apache/nuttx.git synced 2026-06-05 07:12:54 +08:00
Code Issues Actions 2 Packages Projects Releases Wiki Activity

Misc USB storage-related cleanup

Browse Source 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@3515 42af7a65-404d-4744-a932-0658087f49c3
This commit is contained in:
patacongo
2011-04-16 19:28:00 +00:00
parent 93be5f368b
commit 19747bb067
15 changed files with 198 additions and 216 deletions
Download Patch File Download Diff File Expand all files Collapse all files
arch/arm/src/lpc17xx/lpc17_usbdev.c
-2
View File
@@ -1921,7 +1921,6 @@ static inline void lpc17_ep0setup(struct lpc17_usbdev_s *priv)
static inline void lpc17_ep0dataoutinterrupt(struct lpc17_usbdev_s *priv)
{
struct lpc17_ep_s *ep0;
uint32_t pktlen;
/* Copy new setup packet into setup buffer */
@@ -1969,7 +1968,6 @@ static inline void lpc17_ep0dataoutinterrupt(struct lpc17_usbdev_s *priv)
lpc17_epstall(&priv->eplist[LPC17_EP0_IN].ep, false);
lpc17_epstall(&priv->eplist[LPC17_EP0_OUT].ep, false);
}
return;
}
/*******************************************************************************
configs/ea3131/usbstorage/defconfig
-6
View File
@@ -787,12 +787,6 @@ CONFIG_EXAMPLES_USBSTRG_TRACETRANSFERS=n
CONFIG_EXAMPLES_USBSTRG_TRACECONTROLLER=n
CONFIG_EXAMPLES_USBSTRG_TRACEINTERRUPTS=n
CONFIG_EXAMPLES_USBSTRG_TRACEINIT=n
CONFIG_EXAMPLES_USBSTRG_TRACECLASS=n
CONFIG_EXAMPLES_USBSTRG_TRACETRANSFERS=n
CONFIG_EXAMPLES_USBSTRG_TRACECONTROLLER=n
CONFIG_EXAMPLES_USBSTRG_TRACEINTERRUPTS=n
#
# Stack and heap information
#
configs/lpcxpresso-lpc1768/README.txt
+174 -140
View File
@@ -126,17 +126,40 @@ SD Slot
*J55 must be set to provide chip select PIO1_11 signal as the SD slot
chip select.
USB Device
----------
Base-board J4/J6 LPC1768
Signal Pin Pin
------------------- ----- --------
PIO0_6-USB_CONNECT* 23 P0.21
USB_DM 36 USB_D-
USB_DP 37 USB_D+
PIO0_3-VBUS_SENSE 39 P0.5
PIO0_3-VBUS_SENSE** 39 P0.5
*J14 must be set to permit GPIO control of the USB connect pin
**J12 must be set to permit GPIO control of the USB vbus sense pin
J23 is associated the LEDs used for USB support
Here is a more detailed pin mapping:
---------------------------------------------+------+-----------------------------------------------
LPCXpresso | J4/6 | Base Board
---------------------------------------------| |-----------------------------------------------
LPC1768 Signal | | Signal Connection
------------------------------ --------------+------+------------------- ---------------------------
P0.29/USB-D+ P0[29]/USB-D+ | 37 | USB_DP USB D+
P0.30/USB-D- P0[30]/USB-D- | 36 | USB_DM USB D-
P1.18/USB-UP-LED/PWM1.1/CAP1.0 PAD1 | N/A | N/A N/A
P1.30/VBUS/AD0.4 P1[30] | 19 | PIO1_3 (Not used on board)
P2.9/USB-CONNECT/RXD2* PAD19 | N/A | N/A N/A
------------------------------ --------------+------+------------------- ---------------------------
P0.21/RI1/RD1 P0[21] | 23 | PIO0_6-USB_CONNECT VBUS via J14 and transistor
P0.5/I2SRX-WS/TD2/CAP2.1 P0[5] | 39 | PIO0_3-VBUS_SENSE VBUS via J12
------------------------------ --------------+------+------------------- ---------------------------
*P2.9 Connect to a transistor driven USB-D+ pullup on the LPCXpresso board.
Development Environment
^^^^^^^^^^^^^^^^^^^^^^^
@@ -304,12 +327,12 @@ Code Red IDE
Examples
To load the executable file app.axf and start it executing on an LPC1758
target using Red Probe, use the following command line:
target using Red Probe, use the following command line:
crt_emu_cm3_nxp -pLPC1758 -flash-load-exec=app.axf
To load the binary file binary.bin to address 0x1000 to an LPC1343 target
using LPC-Link on Windows XP, use the following command line:
using LPC-Link on Windows XP, use the following command line:
crt_emu_lpc11_13_nxp -wire=hid -pLPC1343 -flash-load=binary.bin -load-base=0x1000
@@ -411,20 +434,20 @@ LEDs
- The LED is not illuminated until the LPCXpresso completes initialization.
If the LED is stuck in the OFF state, this means that the LPCXpresso did not
complete intialization.
complete intialization.
- Each time the OS enters an interrupt (or a signal) it will turn the LED OFF and
restores its previous stated upon return from the interrupt (or signal).
The normal state, after initialization will be a dull glow. The brightness of
the glow will be inversely related to the proportion of time spent within interrupt
handling logic. The glow may decrease in brightness when the system is very
busy handling device interrupts and increase in brightness as the system becomes
idle.
The normal state, after initialization will be a dull glow. The brightness of
the glow will be inversely related to the proportion of time spent within interrupt
handling logic. The glow may decrease in brightness when the system is very
busy handling device interrupts and increase in brightness as the system becomes
idle.
Stuck in the OFF state suggests that that the system never completed
initialization; Stuck in the ON state would indicated that the system
intialialized, but is not takint interrupts.
Stuck in the OFF state suggests that that the system never completed
initialization; Stuck in the ON state would indicated that the system
intialialized, but is not takint interrupts.
- If a fatal assertion or a fatal unhandled exception occurs, the LED will flash
strongly as a slow, 1Hz rate.
@@ -432,164 +455,166 @@ LEDs
LPCXpresso Configuration Options
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
CONFIG_ARCH - Identifies the arch/ subdirectory. This should
be set to:
General Architecture Settings:
CONFIG_ARCH=arm
CONFIG_ARCH - Identifies the arch/ subdirectory. This should
be set to:
CONFIG_ARCH_family - For use in C code:
CONFIG_ARCH=arm
CONFIG_ARCH_ARM=y
CONFIG_ARCH_family - For use in C code:
CONFIG_ARCH_architecture - For use in C code:
CONFIG_ARCH_ARM=y
CONFIG_ARCH_CORTEXM3=y
CONFIG_ARCH_architecture - For use in C code:
CONFIG_ARCH_CHIP - Identifies the arch/*/chip subdirectory
CONFIG_ARCH_CORTEXM3=y
CONFIG_ARCH_CHIP=lpc17xx
CONFIG_ARCH_CHIP - Identifies the arch/*/chip subdirectory
CONFIG_ARCH_CHIP_name - For use in C code to identify the exact
chip:
CONFIG_ARCH_CHIP=lpc17xx
CONFIG_ARCH_CHIP_LPC1768=y
CONFIG_ARCH_CHIP_name - For use in C code to identify the exact
chip:
CONFIG_ARCH_BOARD - Identifies the configs subdirectory and
hence, the board that supports the particular chip or SoC.
CONFIG_ARCH_CHIP_LPC1768=y
CONFIG_ARCH_BOARD=lpcxpresso-lpc1768
CONFIG_ARCH_BOARD - Identifies the configs subdirectory and
hence, the board that supports the particular chip or SoC.
CONFIG_ARCH_BOARD_name - For use in C code
CONFIG_ARCH_BOARD=lpcxpresso-lpc1768
CONFIG_ARCH_BOARD_LPCEXPRESSO=y
CONFIG_ARCH_BOARD_name - For use in C code
CONFIG_ARCH_LOOPSPERMSEC - Must be calibrated for correct operation
of delay loops
CONFIG_ARCH_BOARD_LPCEXPRESSO=y
CONFIG_ENDIAN_BIG - define if big endian (default is little
endian)
CONFIG_ARCH_LOOPSPERMSEC - Must be calibrated for correct operation
of delay loops
CONFIG_DRAM_SIZE - Describes the installed DRAM (CPU SRAM in this case):
CONFIG_ENDIAN_BIG - define if big endian (default is little
endian)
CONFIG_DRAM_SIZE=(32*1024) (32Kb)
CONFIG_DRAM_SIZE - Describes the installed DRAM (CPU SRAM in this case):
There is an additional 32Kb of SRAM in AHB SRAM banks 0 and 1.
CONFIG_DRAM_SIZE=(32*1024) (32Kb)
CONFIG_DRAM_START - The start address of installed DRAM
There is an additional 32Kb of SRAM in AHB SRAM banks 0 and 1.
CONFIG_DRAM_START=0x10000000
CONFIG_DRAM_START - The start address of installed DRAM
CONFIG_DRAM_END - Last address+1 of installed RAM
CONFIG_DRAM_START=0x10000000
CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE)
CONFIG_DRAM_END - Last address+1 of installed RAM
CONFIG_ARCH_IRQPRIO - The LPC17xx supports interrupt prioritization
CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE)
CONFIG_ARCH_IRQPRIO=y
CONFIG_ARCH_IRQPRIO - The LPC17xx supports interrupt prioritization
CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to boards that
have LEDs
CONFIG_ARCH_IRQPRIO=y
CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt
stack. If defined, this symbol is the size of the interrupt
stack in bytes. If not defined, the user task stacks will be
used during interrupt handling.
CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to boards that
have LEDs
CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions
CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt
stack. If defined, this symbol is the size of the interrupt
stack in bytes. If not defined, the user task stacks will be
used during interrupt handling.
CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to board architecture.
CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions
CONFIG_ARCH_CALIBRATION - Enables some build in instrumentation that
cause a 100 second delay during boot-up. This 100 second delay
serves no purpose other than it allows you to calibratre
CONFIG_ARCH_LOOPSPERMSEC. You simply use a stop watch to measure
the 100 second delay then adjust CONFIG_ARCH_LOOPSPERMSEC until
the delay actually is 100 seconds.
CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to board architecture.
Individual subsystems can be enabled:
CONFIG_LPC17_MAINOSC=y
CONFIG_LPC17_PLL0=y
CONFIG_LPC17_PLL1=n
CONFIG_LPC17_ETHERNET=n
CONFIG_LPC17_USBHOST=n
CONFIG_LPC17_USBOTG=n
CONFIG_LPC17_USBDEV=n
CONFIG_LPC17_UART0=y
CONFIG_LPC17_UART1=n
CONFIG_LPC17_UART2=n
CONFIG_LPC17_UART3=n
CONFIG_LPC17_CAN1=n
CONFIG_LPC17_CAN2=n
CONFIG_LPC17_SPI=n
CONFIG_LPC17_SSP0=n
CONFIG_LPC17_SSP1=n
CONFIG_LPC17_I2C0=n
CONFIG_LPC17_I2C1=n
CONFIG_LPC17_I2S=n
CONFIG_LPC17_TMR0=n
CONFIG_LPC17_TMR1=n
CONFIG_LPC17_TMR2=n
CONFIG_LPC17_TMR3=n
CONFIG_LPC17_RIT=n
CONFIG_LPC17_PWM=n
CONFIG_LPC17_MCPWM=n
CONFIG_LPC17_QEI=n
CONFIG_LPC17_RTC=n
CONFIG_LPC17_WDT=n
CONFIG_LPC17_ADC=n
CONFIG_LPC17_DAC=n
CONFIG_LPC17_GPDMA=n
CONFIG_LPC17_FLASH=n
CONFIG_ARCH_CALIBRATION - Enables some build in instrumentation that
cause a 100 second delay during boot-up. This 100 second delay
serves no purpose other than it allows you to calibratre
CONFIG_ARCH_LOOPSPERMSEC. You simply use a stop watch to measure
the 100 second delay then adjust CONFIG_ARCH_LOOPSPERMSEC until
the delay actually is 100 seconds.
Individual subsystems can be enabled:
CONFIG_LPC17_MAINOSC=y
CONFIG_LPC17_PLL0=y
CONFIG_LPC17_PLL1=n
CONFIG_LPC17_ETHERNET=n
CONFIG_LPC17_USBHOST=n
CONFIG_LPC17_USBOTG=n
CONFIG_LPC17_USBDEV=n
CONFIG_LPC17_UART0=y
CONFIG_LPC17_UART1=n
CONFIG_LPC17_UART2=n
CONFIG_LPC17_UART3=n
CONFIG_LPC17_CAN1=n
CONFIG_LPC17_CAN2=n
CONFIG_LPC17_SPI=n
CONFIG_LPC17_SSP0=n
CONFIG_LPC17_SSP1=n
CONFIG_LPC17_I2C0=n
CONFIG_LPC17_I2C1=n
CONFIG_LPC17_I2S=n
CONFIG_LPC17_TMR0=n
CONFIG_LPC17_TMR1=n
CONFIG_LPC17_TMR2=n
CONFIG_LPC17_TMR3=n
CONFIG_LPC17_RIT=n
CONFIG_LPC17_PWM=n
CONFIG_LPC17_MCPWM=n
CONFIG_LPC17_QEI=n
CONFIG_LPC17_RTC=n
CONFIG_LPC17_WDT=n
CONFIG_LPC17_ADC=n
CONFIG_LPC17_DAC=n
CONFIG_LPC17_GPDMA=n
CONFIG_LPC17_FLASH=n
LPC17xx specific device driver settings
CONFIG_UARTn_SERIAL_CONSOLE - selects the UARTn for the
console and ttys0 (default is the UART0).
CONFIG_UARTn_RXBUFSIZE - Characters are buffered as received.
This specific the size of the receive buffer
CONFIG_UARTn_TXBUFSIZE - Characters are buffered before
being sent. This specific the size of the transmit buffer
CONFIG_UARTn_BAUD - The configure BAUD of the UART. Must be
CONFIG_UARTn_BITS - The number of bits. Must be either 7 or 8.
CONFIG_UARTn_PARTIY - 0=no parity, 1=odd parity, 2=even parity
CONFIG_UARTn_2STOP - Two stop bits
CONFIG_UARTn_SERIAL_CONSOLE - selects the UARTn for the
console and ttys0 (default is the UART0).
CONFIG_UARTn_RXBUFSIZE - Characters are buffered as received.
This specific the size of the receive buffer
CONFIG_UARTn_TXBUFSIZE - Characters are buffered before
being sent. This specific the size of the transmit buffer
CONFIG_UARTn_BAUD - The configure BAUD of the UART. Must be
CONFIG_UARTn_BITS - The number of bits. Must be either 7 or 8.
CONFIG_UARTn_PARTIY - 0=no parity, 1=odd parity, 2=even parity
CONFIG_UARTn_2STOP - Two stop bits
LPC17xx specific PHY/Ethernet device driver settings. These setting
also require CONFIG_NET and CONFIG_LPC17_ETHERNET.
CONFIG_PHY_KS8721 - Selects Micrel KS8721 PHY
CONFIG_PHY_AUTONEG - Enable auto-negotion
CONFIG_PHY_SPEED100 - Select 100Mbit vs. 10Mbit speed.
CONFIG_PHY_FDUPLEX - Select full (vs. half) duplex
CONFIG_PHY_KS8721 - Selects Micrel KS8721 PHY
CONFIG_PHY_AUTONEG - Enable auto-negotion
CONFIG_PHY_SPEED100 - Select 100Mbit vs. 10Mbit speed.
CONFIG_PHY_FDUPLEX - Select full (vs. half) duplex
CONFIG_NET_EMACRAM_SIZE - Size of EMAC RAM. Default: 16Kb
CONFIG_NET_NTXDESC - Configured number of Tx descriptors. Default: 18
CONFIG_NET_NRXDESC - Configured number of Rx descriptors. Default: 18
CONFIG_NET_PRIORITY - Ethernet interrupt priority. The is default is
the higest priority.
CONFIG_NET_WOL - Enable Wake-up on Lan (not fully implemented).
CONFIG_NET_REGDEBUG - Enabled low level register debug. Also needs
CONFIG_DEBUG.
CONFIG_NET_DUMPPACKET - Dump all received and transmitted packets.
Also needs CONFIG_DEBUG.
CONFIG_NET_HASH - Enable receipt of near-perfect match frames.
CONFIG_NET_MULTICAST - Enable receipt of multicast (and unicast) frames.
CONFIG_NET_NTXDESC - Configured number of Tx descriptors. Default: 18
CONFIG_NET_NRXDESC - Configured number of Rx descriptors. Default: 18
CONFIG_NET_PRIORITY - Ethernet interrupt priority. The is default is
the higest priority.
CONFIG_NET_WOL - Enable Wake-up on Lan (not fully implemented).
CONFIG_NET_REGDEBUG - Enabled low level register debug. Also needs
CONFIG_DEBUG.
CONFIG_NET_DUMPPACKET - Dump all received and transmitted packets.
Also needs CONFIG_DEBUG.
CONFIG_NET_HASH - Enable receipt of near-perfect match frames.
CONFIG_NET_MULTICAST - Enable receipt of multicast (and unicast) frames.
Automatically set if CONFIG_NET_IGMP is selected.
LPC17xx USB Device Configuration
CONFIG_LPC17_USBDEV_FRAME_INTERRUPT
Handle USB Start-Of-Frame events.
Enable reading SOF from interrupt handler vs. simply reading on demand.
Probably a bad idea... Unless there is some issue with sampling the SOF
from hardware asynchronously.
CONFIG_LPC17_USBDEV_EPFAST_INTERRUPT
Enable high priority interrupts. I have no idea why you might want to
do that
CONFIG_LPC17_USBDEV_NDMADESCRIPTORS
Number of DMA descriptors to allocate in SRAM.
CONFIG_LPC17_USBDEV_DMA
Enable lpc17xx-specific DMA support
CONFIG_LPC17_USBDEV_FRAME_INTERRUPT
Handle USB Start-Of-Frame events.
Enable reading SOF from interrupt handler vs. simply reading on demand.
Probably a bad idea... Unless there is some issue with sampling the SOF
from hardware asynchronously.
CONFIG_LPC17_USBDEV_EPFAST_INTERRUPT
Enable high priority interrupts. I have no idea why you might want to
do that
CONFIG_LPC17_USBDEV_NDMADESCRIPTORS
Number of DMA descriptors to allocate in SRAM.
CONFIG_LPC17_USBDEV_DMA
Enable lpc17xx-specific DMA support
LPC17xx USB Host Configuration (the LPCXpresso does not support USB Host)
@@ -614,10 +639,10 @@ Configurations
Each LPCXpresso configuration is maintained in a sudirectory and can be
selected as follow:
cd tools
./configure.sh lpcxpresso-lpc1768/<subdir>
cd -
. ./setenv.sh
cd tools
./configure.sh lpcxpresso-lpc1768/<subdir>
cd -
. ./setenv.sh
Where <subdir> is one of the following:
@@ -627,31 +652,40 @@ Where <subdir> is one of the following:
Support for the board's SPI-based MicroSD card is included
(but not passing tests as of this writing).
NOTE: At present, the value for the SD SPI frequency is too
high and the SD will failing. Setting that frequency to 400000
removes the problem. TODO: Tune this frequency to some optimal
value.
ostest:
This configuration directory, performs a simple OS test using
apps/examples/ostest.
NOTE: The OSTest runs on the LPCXpresso if it is not installed
on the base board (using an add-on MAX232 RS232 driver connected
to:
NOTE: The OSTest runs on the LPCXpresso if it is not installed
on the base board (using an add-on MAX232 RS232 driver connected
to:
P0[0]/RD1/TXD3/SDA1 J6-9
P0[1]/TD1/RXD3/SCL J6-10
I suspect that this test does not run on with the base board
attached because OSTest blasts out a lot of serial data and
overruns the FTDI chip before it has a chance to establish the
connection with the host.
I suspect that this test does not run on with the base board
attached because OSTest blasts out a lot of serial data and
overruns the FTDI chip before it has a chance to establish the
connection with the host.
thttpd:
This builds the THTTPD web server example using the THTTPD and
the apps/examples/thttpd application.
NOTE: You will need to build the NXFLAT toolchain as described
above in order to use this example.
NOTE: You will need to build the NXFLAT toolchain as described
above in order to use this example.
usbstorage:
This configuration directory exercises the USB mass storage
class driver at apps/examples/usbstorage. See apps/examples/README.txt
for more information.
NOTE: At present, the value for the SD SPI frequency is too
high and the SD will failing. Setting that frequency to 400000
removes the problem. TODO: Tune this frequency to some optimal
value.
configs/lpcxpresso-lpc1768/nsh/defconfig
-6
View File
@@ -910,12 +910,6 @@ CONFIG_EXAMPLES_USBSTRG_TRACETRANSFERS=n
CONFIG_EXAMPLES_USBSTRG_TRACECONTROLLER=n
CONFIG_EXAMPLES_USBSTRG_TRACEINTERRUPTS=n
CONFIG_EXAMPLES_USBSTRG_TRACEINIT=n
CONFIG_EXAMPLES_USBSTRG_TRACECLASS=n
CONFIG_EXAMPLES_USBSTRG_TRACETRANSFERS=n
CONFIG_EXAMPLES_USBSTRG_TRACECONTROLLER=n
CONFIG_EXAMPLES_USBSTRG_TRACEINTERRUPTS=n
#
# Stack and heap information
#
configs/lpcxpresso-lpc1768/ostest/defconfig
-6
View File
@@ -854,12 +854,6 @@ CONFIG_EXAMPLES_USBSTRG_TRACETRANSFERS=n
CONFIG_EXAMPLES_USBSTRG_TRACECONTROLLER=n
CONFIG_EXAMPLES_USBSTRG_TRACEINTERRUPTS=n
CONFIG_EXAMPLES_USBSTRG_TRACEINIT=n
CONFIG_EXAMPLES_USBSTRG_TRACECLASS=n
CONFIG_EXAMPLES_USBSTRG_TRACETRANSFERS=n
CONFIG_EXAMPLES_USBSTRG_TRACECONTROLLER=n
CONFIG_EXAMPLES_USBSTRG_TRACEINTERRUPTS=n
#
# Stack and heap information
#
configs/lpcxpresso-lpc1768/src/lpcxpresso_internal.h
+23 -7
View File
@@ -154,13 +154,29 @@
# define LPCXPRESSO_SD_CD (GPIO_INPUT | GPIO_PULLUP | GPIO_PORT2 | GPIO_PIN11)
#endif
/* Base-board J4/J6 LPC1768
* Signal Pin Pin
* ------------------- ----- --------
* PIO0_6-USB_CONNECT* 23 P0.21
* USB_DM 36 USB_D-
* USB_DP 37 USB_D+
* PIO0_3-VBUS_SENSE 39 P0.5
/* USB:
*
* Base-board J4/J6 LPC1768
* Signal Pin Pin
* ------------------- ----- --------
* USB_DM 36 P0.30/USB-D-
* USB_DP 37 P0.29/USB-D+
* N/C N/C P1.18/USB-UP-LED/PWM1.1/CAP1.0
* PIO1_3 (not used) 19 P1.30/VBUS/AD0.4
* N/C N/C P2.9/USB-CONNECT/RXD2 (See Notes)
* ------------------- ----- --------
* PIO0_6-USB_CONNECT* 23 P0.21/RI1/RD1
* PIO0_3-VBUS_SENSE 39 P0.5/I2SRX-WS/TD2/CAP2.1
*
* Noes:
* - The standard USB CONNECT (P0.9) provides USB D+ pullup on board the
* LPCXpresso card; it should be un-necessary to use the based board
* version of the pullup.
* - J14 must be set to permit GPIO control of the base board USB connect
* pin
* - The standard VBUS (P1.30) is not connected.
* - J12 must be set to permit GPIO control of the USB vbus sense pin
* - The standard USB LED (P1.18) is not connected.
*/
#define LPCXPRESSO_USB_CONNECT (GPIO_OUTPUT | GPIO_VALUE_ONE | GPIO_PORT0 | GPIO_PIN21)
configs/lpcxpresso-lpc1768/src/up_usbstrg.c
+1 -1
View File
@@ -1,7 +1,7 @@
/****************************************************************************
* configs/lpcxpresso-lpc1768/src/up_usbstrg.c
*
* Copyright (C) 2010 Gregory Nutt. All rights reserved.
* Copyright (C) 2011 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
*
* Configure and register the LPC17xx MMC/SD SPI block driver.
configs/lpcxpresso-lpc1768/thttpd/defconfig
-6
View File
@@ -965,12 +965,6 @@ CONFIG_EXAMPLES_USBSTRG_TRACETRANSFERS=n
CONFIG_EXAMPLES_USBSTRG_TRACECONTROLLER=n
CONFIG_EXAMPLES_USBSTRG_TRACEINTERRUPTS=n
CONFIG_EXAMPLES_USBSTRG_TRACEINIT=n
CONFIG_EXAMPLES_USBSTRG_TRACECLASS=n
CONFIG_EXAMPLES_USBSTRG_TRACETRANSFERS=n
CONFIG_EXAMPLES_USBSTRG_TRACECONTROLLER=n
CONFIG_EXAMPLES_USBSTRG_TRACEINTERRUPTS=n
#
# Stack and heap information
#
configs/lpcxpresso-lpc1768/usbstorage/defconfig
-6
View File
@@ -855,12 +855,6 @@ CONFIG_EXAMPLES_USBSTRG_TRACETRANSFERS=n
CONFIG_EXAMPLES_USBSTRG_TRACECONTROLLER=n
CONFIG_EXAMPLES_USBSTRG_TRACEINTERRUPTS=n
CONFIG_EXAMPLES_USBSTRG_TRACEINIT=n
CONFIG_EXAMPLES_USBSTRG_TRACECLASS=n
CONFIG_EXAMPLES_USBSTRG_TRACETRANSFERS=n
CONFIG_EXAMPLES_USBSTRG_TRACECONTROLLER=n
CONFIG_EXAMPLES_USBSTRG_TRACEINTERRUPTS=n
#
# Stack and heap information
#
configs/mcu123-lpc214x/usbstorage/defconfig
-6
View File
@@ -656,12 +656,6 @@ CONFIG_EXAMPLES_USBSTRG_TRACETRANSFERS=y
CONFIG_EXAMPLES_USBSTRG_TRACECONTROLLER=y
CONFIG_EXAMPLES_USBSTRG_TRACEINTERRUPTS=n
CONFIG_EXAMPLES_USBSTRG_TRACEINIT=n
CONFIG_EXAMPLES_USBSTRG_TRACECLASS=n
CONFIG_EXAMPLES_USBSTRG_TRACETRANSFERS=n
CONFIG_EXAMPLES_USBSTRG_TRACECONTROLLER=n
CONFIG_EXAMPLES_USBSTRG_TRACEINTERRUPTS=n
#
# Stack and heap information
#
configs/nucleus2g/usbstorage/defconfig
-6
View File
@@ -833,12 +833,6 @@ CONFIG_EXAMPLES_USBSTRG_TRACETRANSFERS=n
CONFIG_EXAMPLES_USBSTRG_TRACECONTROLLER=n
CONFIG_EXAMPLES_USBSTRG_TRACEINTERRUPTS=n
CONFIG_EXAMPLES_USBSTRG_TRACEINIT=n
CONFIG_EXAMPLES_USBSTRG_TRACECLASS=n
CONFIG_EXAMPLES_USBSTRG_TRACETRANSFERS=n
CONFIG_EXAMPLES_USBSTRG_TRACECONTROLLER=n
CONFIG_EXAMPLES_USBSTRG_TRACEINTERRUPTS=n
#
# Stack and heap information
#
configs/olimex-lpc1766stk/nx/defconfig
-6
View File
@@ -1012,12 +1012,6 @@ CONFIG_EXAMPLES_USBSTRG_TRACETRANSFERS=n
CONFIG_EXAMPLES_USBSTRG_TRACECONTROLLER=n
CONFIG_EXAMPLES_USBSTRG_TRACEINTERRUPTS=n
CONFIG_EXAMPLES_USBSTRG_TRACEINIT=n
CONFIG_EXAMPLES_USBSTRG_TRACECLASS=n
CONFIG_EXAMPLES_USBSTRG_TRACETRANSFERS=n
CONFIG_EXAMPLES_USBSTRG_TRACECONTROLLER=n
CONFIG_EXAMPLES_USBSTRG_TRACEINTERRUPTS=n
#
# Settings for examples/nx
#
configs/olimex-lpc1766stk/ostest/defconfig
-6
View File
@@ -848,12 +848,6 @@ CONFIG_EXAMPLES_USBSTRG_TRACETRANSFERS=n
CONFIG_EXAMPLES_USBSTRG_TRACECONTROLLER=n
CONFIG_EXAMPLES_USBSTRG_TRACEINTERRUPTS=n
CONFIG_EXAMPLES_USBSTRG_TRACEINIT=n
CONFIG_EXAMPLES_USBSTRG_TRACECLASS=n
CONFIG_EXAMPLES_USBSTRG_TRACETRANSFERS=n
CONFIG_EXAMPLES_USBSTRG_TRACECONTROLLER=n
CONFIG_EXAMPLES_USBSTRG_TRACEINTERRUPTS=n
#
# Stack and heap information
#
configs/olimex-lpc1766stk/usbstorage/defconfig
-6
View File
@@ -848,12 +848,6 @@ CONFIG_EXAMPLES_USBSTRG_TRACETRANSFERS=n
CONFIG_EXAMPLES_USBSTRG_TRACECONTROLLER=n
CONFIG_EXAMPLES_USBSTRG_TRACEINTERRUPTS=n
CONFIG_EXAMPLES_USBSTRG_TRACEINIT=n
CONFIG_EXAMPLES_USBSTRG_TRACECLASS=n
CONFIG_EXAMPLES_USBSTRG_TRACETRANSFERS=n
CONFIG_EXAMPLES_USBSTRG_TRACECONTROLLER=n
CONFIG_EXAMPLES_USBSTRG_TRACEINTERRUPTS=n
#
# Stack and heap information
#
configs/stm3210e-eval/usbstorage/defconfig
-6
View File
@@ -818,12 +818,6 @@ CONFIG_EXAMPLES_USBSTRG_TRACETRANSFERS=n
CONFIG_EXAMPLES_USBSTRG_TRACECONTROLLER=n
CONFIG_EXAMPLES_USBSTRG_TRACEINTERRUPTS=n
CONFIG_EXAMPLES_USBSTRG_TRACEINIT=n
CONFIG_EXAMPLES_USBSTRG_TRACECLASS=n
CONFIG_EXAMPLES_USBSTRG_TRACETRANSFERS=n
CONFIG_EXAMPLES_USBSTRG_TRACECONTROLLER=n
CONFIG_EXAMPLES_USBSTRG_TRACEINTERRUPTS=n
#
# Stack and heap information
#