From 18d07b7ddf10e40bf3d6f4e99402356ea8ab2f7d Mon Sep 17 00:00:00 2001
From: patacongo <patacongo@42af7a65-404d-4744-a932-0658087f49c3>
Date: Sat, 11 Sep 2010 01:58:26 +0000
Subject: [PATCH] Add M25Px as paging source

git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@2937 42af7a65-404d-4744-a932-0658087f49c3
---
 Documentation/NuttxPortingGuide.html | 17 ++++++++++++++++-
 1 file changed, 16 insertions(+), 1 deletion(-)

diff --git a/Documentation/NuttxPortingGuide.html b/Documentation/NuttxPortingGuide.html
index 5272846bcc1..ed94849e79a 100644
--- a/Documentation/NuttxPortingGuide.html
+++ b/Documentation/NuttxPortingGuide.html
@@ -12,7 +12,7 @@
       <h1><big><font color="#3c34ec">
         <i>NuttX RTOS Porting Guide</i>
       </font></big></h1>
-      <p>Last Updated: September 8, 2010</p>
+      <p>Last Updated: September 10, 2010</p>
     </td>
   </tr>
 </table>
@@ -2593,6 +2593,21 @@ build
     This should be defined to be zero for the typical device that has only a single slot (See <code>CONFIG_MMCSD_NSLOTS</code>).
     If defined, <code>CONFIG_PAGING_SDSLOT</code> will instruct certain board-specific logic to initialize the media in this SD slot.
   </li>
+  <li>
+    <code>CONFIG_PAGING_M25PX</code>:
+    Use the m25px.c FLASH driver.
+	If this is selected, then the MTD interface to the MP25x device will be used to support paging.
+  </li>
+  <li>
+    <code>CONFIG_PAGING_M25PX_BINOFFSET</code>:
+    If CONFIG_PAGING_M25PX is defined then CONFIG_PAGING_M25PX_BINOFFSET will be used to specify the offset in bytes into the FLASH device where the NuttX binary image is located.
+    Default: 0
+  </li>
+  <li>
+    <code>CONFIG_PAGING_M25PX_SPIPORT</code>:
+    If CONFIG_PAGING_M25PX is defined and the device has multiple SPI busses (ports), then this configuration should be set to indicate which SPI port the M25Px device is connected.
+    Default: 0
+  </li>
 </ul>
 <p>
   The following can be used to disable categories of APIs supported