Add port to Zilogic Systems ZKIT-ARM-1769 board (more coming)

git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5673 42af7a65-404d-4744-a932-0658087f49c3

configs/Kconfig

@@ -653,6 +653,13 @@ config ARCH_BOARD_ZP214XPA
 		ZPA213X/4XPA development board. Includes support for the
 		UG-2864AMBAG01 OLED also from The0.net
 
+config ARCH_BOARD_ZKITARM
+	bool "Zilogic ZKit-ARM-1769 Development Kit"
+	depends on ARCH_CHIP_LPC1768
+	---help---
+		Zilogic System's ARM development Kit, ZKIT-ARM-1769.  This board is based
+		on the NXP LPC1769.  The Nuttx Buildroot toolchain is used by default.
+
 config ARCH_BOARD_SIM
 	bool "User mode simulation"
 	depends on ARCH_SIM
@@ -738,6 +745,7 @@ config ARCH_BOARD
 	default "z8encore000zco"      if ARCH_BOARD_Z8ENCORE000ZCO
 	default "z8f64200100kit"      if ARCH_BOARD_Z8F64200100KIT
 	default "zp214xpa"            if ARCH_BOARD_ZP214XPA
+	default "zkit-arm-1769"       if ARCH_BOARD_ZKITARM
 	default "sim"                 if ARCH_BOARD_SIM
 	default ""                    if ARCH_BOARD_CUSTOM
 
@@ -982,6 +990,9 @@ endif
 if ARCH_BOARD_ZP214XPA
 source "configs/zp214xpa/Kconfig"
 endif
+if ARCH_BOARD_ZKITARM
+source "configs/zkit-arm-1769/Kconfig"
+endif
 if ARCH_BOARD_SIM
 source "configs/sim/Kconfig"
 endif

configs/README.txt

@@ -2036,6 +2036,10 @@ configs/zp214xpa
   ZPA213X/4XPA development board. Includes support for the
   UG-2864AMBAG01 OLED also from The0.net
 
+configs/zkit-arm-1769
+  Zilogic System's ARM development Kit, ZKIT-ARM-1769.  This board is based
+  on the NXP LPC1769.  The Nuttx Buildroot toolchain is used by default.
+
 Configuring NuttX
 ^^^^^^^^^^^^^^^^^
 

configs/zkit-arm-1769/Kconfig

@@ -0,0 +1,13 @@
+#
+# For a description of the syntax of this configuration file,
+# see misc/tools/kconfig-language.txt.
+#
+
+if ARCH_BOARD_ZKITARM
+config ARCH_LEDS
+	bool "NuttX LED support"
+	default n
+	---help---
+		"Support control of board LEDs by NuttX to indicate system state"
+
+endif

configs/zkit-arm-1769/include/board.h

@@ -0,0 +1,342 @@
+/************************************************************************************
+ * configs/zkit-arm-1769/include/board.h
+ * include/arch/board/board.h
+ *
+ *   Copyright (C) 2013 Zilogic Systems. All rights reserved.
+ *   Author: BabuSubashChandar <code@zilogic.com>
+ *
+ * Based on configs/lpcxpresso-lpc1768/include/board.h
+ *
+ *   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************************************/
+
+#ifndef __CONFIGS_ZKIT_ARM_1769_INCLUDE_BOARD_H
+#define __CONFIGS_ZKIT_ARM_1769_INCLUDE_BOARD_H
+
+/************************************************************************************
+ * Included Files
+ ************************************************************************************/
+
+#include <nuttx/config.h>
+
+#include <stdbool.h>
+
+#if defined(CONFIG_ARCH_IRQBUTTONS) && defined(CONFIG_GPIO_IRQ)
+#  include <nuttx/irq.h>
+#endif
+
+/************************************************************************************
+ * Definitions
+ ************************************************************************************/
+/* Clocking *************************************************************************/
+/* NOTE:  The following definitions require lpc17_syscon.h.  It is not included here
+ * because the including C file may not have that file in its include path.
+ */
+
+#define BOARD_XTAL_FREQUENCY        (12000000)            /* XTAL oscillator frequency */
+#define BOARD_OSCCLK_FREQUENCY      BOARD_XTAL_FREQUENCY  /* Main oscillator frequency */
+#define BOARD_RTCCLK_FREQUENCY      (32768)               /* RTC oscillator frequency */
+#define BOARD_INTRCOSC_FREQUENCY    (4000000)             /* Internal RC oscillator frequency */
+
+/* This is the clock setup we configure for:
+ *
+ *   SYSCLK = BOARD_OSCCLK_FREQUENCY = 12MHz  -> Select Main oscillator for source
+ *   PLL0CLK = (2 * 20 * SYSCLK) / 1 = 480MHz -> PLL0 multipler=20, pre-divider=1
+ *   CCLCK = 480MHz / 6 = 80MHz               -> CCLK divider = 6
+ */
+
+#define LPC17_CCLK                 80000000 /* 80Mhz */
+
+/* Select the main oscillator as the frequency source.  SYSCLK is then the frequency
+ * of the main oscillator.
+ */
+
+#undef CONFIG_LPC17_MAINOSC
+#define CONFIG_LPC17_MAINOSC       1
+#define BOARD_SCS_VALUE            SYSCON_SCS_OSCEN
+
+/* Select the main oscillator and CCLK divider. The output of the divider is CCLK.
+ * The input to the divider (PLLCLK) will be determined by the PLL output.
+ */
+
+#define BOARD_CCLKCFG_DIVIDER      6
+#define BOARD_CCLKCFG_VALUE        ((BOARD_CCLKCFG_DIVIDER-1) << SYSCON_CCLKCFG_SHIFT)
+
+/* PLL0.  PLL0 is used to generate the CPU clock divider input (PLLCLK).
+ *
+ *  Source clock:               Main oscillator
+ *  PLL0 Multiplier value (M):  20
+ *  PLL0 Pre-divider value (N): 1
+ *
+ *  PLL0CLK = (2 * 20 * SYSCLK) / 1 = 480MHz
+ */
+
+#undef CONFIG_LPC17_PLL0
+#define CONFIG_LPC17_PLL0          1
+#define BOARD_CLKSRCSEL_VALUE      SYSCON_CLKSRCSEL_MAIN
+
+#define BOARD_PLL0CFG_MSEL         20
+#define BOARD_PLL0CFG_NSEL         1
+#define BOARD_PLL0CFG_VALUE \
+  (((BOARD_PLL0CFG_MSEL-1) << SYSCON_PLL0CFG_MSEL_SHIFT) | \
+   ((BOARD_PLL0CFG_NSEL-1) << SYSCON_PLL0CFG_NSEL_SHIFT))
+
+/* PLL1 -- Not used. */
+
+#undef CONFIG_LPC17_PLL1
+#define BOARD_PLL1CFG_MSEL         36
+#define BOARD_PLL1CFG_NSEL         1
+#define BOARD_PLL1CFG_VALUE \
+  (((BOARD_PLL1CFG_MSEL-1) << SYSCON_PLL1CFG_MSEL_SHIFT) | \
+   ((BOARD_PLL1CFG_NSEL-1) << SYSCON_PLL1CFG_NSEL_SHIFT))
+
+/* USB divider.  This divider is used when PLL1 is not enabled to get the
+ * USB clock from PLL0:
+ *
+ *  USBCLK = PLL0CLK / 10 = 48MHz
+ */
+
+#define BOARD_USBCLKCFG_VALUE      SYSCON_USBCLKCFG_DIV10
+
+/* FLASH Configuration */
+
+#undef  CONFIG_LP17_FLASH
+#define CONFIG_LP17_FLASH          1
+#define BOARD_FLASHCFG_VALUE       0x0000303a
+
+/* Ethernet configuration */
+
+//#define ETH_MCFG_CLKSEL_DIV ETH_MCFG_CLKSEL_DIV44
+#define ETH_MCFG_CLKSEL_DIV ETH_MCFG_CLKSEL_DIV20
+
+/* LED definitions ******************************************************************/
+/* If CONFIG_ARCH_LEDS is not defined, then the user can control the LEDs in
+ * any way.  The following definitions are used to access individual LEDs.
+ *
+ * LED1            -- Connected to P0[19]
+ * LED2            -- Connected to P0[21]
+ */
+
+/* LED index values for use with lpc17_setled() */
+
+#define BOARD_LED1                0
+#define BOARD_LED2                1
+#define BOARD_NLEDS               2
+
+/* LED bits for use with lpc17_setleds() */
+
+#define BOARD_LED1_BIT            (1 << BOARD_LED1)
+#define BOARD_LED2_BIT            (1 << BOARD_LED2)
+
+/* If CONFIG_ARCH_LEDs is defined, then NuttX will control the 2 LEDs
+ * on board the ZKIT-ARM-1769.  The following definitions
+ * describe how NuttX controls the LEDs:
+ */
+                                      /* LED1 LED2 */
+#define LED_STARTED                0  /*  OFF  OFF = Still initializing */
+#define LED_HEAPALLOCATE           0  /*  OFF  OFF = Still initializing */
+#define LED_IRQSENABLED            0  /*  OFF  OFF = Still initializing */
+#define LED_STACKCREATED           1  /*  ON   OFF = Initialization complete */
+#define LED_INIRQ                  2  /*  N/C  ON  = In an interrupt handler */
+#define LED_SIGNAL                 2  /*  N/C  ON  = In a signal handler (glowing) */
+#define LED_ASSERTION              2  /*  N/C  ON  = In an assertion */
+#define LED_PANIC                  2  /*  N/C  ON  = Oops! We crashed. (flashing) */
+#define LED_IDLE                   3  /*  OFF  N/C = LPC17 in sleep mode (LED1 glowing) */
+
+/* Button definitions ***************************************************************/
+/* The ZKIT-ARM-1769 supports several buttons.  All will read "1" when open and "0"
+ * when closed
+ *
+ * KEY1            -- Connected to P1[19]
+ * KEY2            -- Connected to P1[27]
+ * KEY3            -- Connected to P1[28]
+ * KEY4            -- Connected to P1[31]
+ * KEY5            -- Connected to P2[13]
+ *
+ */
+#define BOARD_BUTTON_1             0
+#define BOARD_BUTTON_2             1
+#define BOARD_BUTTON_3             2
+#define BOARD_BUTTON_4             3
+#define BOARD_BUTTON_5             4
+#define BOARD_NUM_BUTTONS          5
+#define BOARD_BUTTON_BUTTON1_BIT   (1 << BOARD_BUTTON_1)
+#define BOARD_BUTTON_BUTTON2_BIT   (1 << BOARD_BUTTON_2)
+#define BOARD_BUTTON_BUTTON3_BIT   (1 << BOARD_BUTTON_3)
+#define BOARD_BUTTON_BUTTON4_BIT   (1 << BOARD_BUTTON_4)
+#define BOARD_BUTTON_BUTTON5_BIT   (1 << BOARD_BUTTON_5)
+
+/* Alternate pin selections *********************************************************/
+/* Pin Description                      On Board       Connector
+ * -------------------------------- ---------------- -------------
+ * P0.0/RD1/TXD3/SDA1                   RD1            AUX-CON
+ * P0.1/TD1/RXD3/SCL1                   TD1
+ * P0.2/TXD0/AD0.7                      TXD0           COM0
+ * P0.3/RXD0/AD0.6                      RXD0
+ * P0.4/I2SRX_CLK/RD2/CAP2.0            GPIO0
+ * P0.5/I2SRX_WS/TD2/CAP2.1             GPIO1
+ * P0.6/I2SRX_SDA/SSEL1/MAT2.0          SSEL1          SPI
+ * P0.7/I2STX_CLK/SCK1/MAT2.1           SCK1
+ * P0.8/I2STX_WS/MISO1/MAT2.2           MISO1
+ * P0.9/I2STX_SDA/MOSI1/MAT2.3          MOSI1
+ * P0.10/TXD2/SDA2/MAT3.0               TXD2           AUX-CON
+ * P0.11/RXD2/SCL2/MAT3.1               RXD2
+ * P0.15/TXD1/SCK0/SCK                  SD-SCK
+ * P0.16/RXD1/SSEL0/SSEL                SD-SSEL        SD-CARD
+ * P0.17/CTS1/MISO0/MISO                SD-MISO
+ * P0.18/DCD1/M0SI0/MOSI                SD-MOSI
+ * P0.19/DSR1/SDA1                      LED1
+ * P0.20/DTR1/SCL1                      DTR1           COM1
+ * P0.21/RI1/RD1 N.C                    LED2
+ * P0.22/RTS1/TD1                       RTS1           COM1
+ * P0.23/AD0.0/I2SRX_CLK/CAP3.0         AD0
+ * P0.24/AD0.1/I2SRX_WS/CAP3.1          AD1            AIN
+ * P0.25/AD0.2/I2SRX_SDA/TXD3           AD2
+ * P0.26/AD0.3/AOUT/RXD3                AD3
+ * P0.27/SDA0/USB_SDA                   SDA0           I2C0
+ * P0.28/SCL0/USB_SCL                   SCL0
+ * P0.29/USB_D+                         USB-D+         USB
+ * P0.30/USB_D-                         USB-D-
+ */
+
+#define GPIO_CAN1_RD       GPIO_CAN1_RD_1
+#define GPIO_CAN1_TD       GPIO_CAN1_TD_1
+#define GPIO_I2C1_SDA      GPIO_I2C0_SDA
+#define GPIO_I2C1_SCL      GPIO_I2C0_SCL
+#define GPIO_SSP1_SCK      GPIO_SSP1_SCK_1
+#define GPIO_UART2_TXD     GPIO_UART2_TXD_1
+#define GPIO_UART2_RXD     GPIO_UART2_RXD_1
+#define GPIO_UART1_TXD     GPIO_UART1_TXD_2
+#define GPIO_UART1_RXD     GPIO_UART1_RXD_2
+#define GPIO_SSP0_SCK      GPIO_SSP0_SCK_1
+#define GPIO_SSP0_SSEL     GPIO_SSP0_SSEL_1
+#define GPIO_SSP0_MISO     GPIO_SSP0_MISO_1
+#define GPIO_SSP0_MOSI     GPIO_SSP0_MOSI_1
+
+/* P1.0/ENET_TXD0                       ETH-TXD0
+ * P1.1/ENET_TXD1                       ETH-TXD1
+ * P1.4/ENET_TX_EN                      ETH-TXEN
+ * P1.8/ENET_CRS                        ETH-CRS
+ * P1.9/ENET_RXD0                       ETH-RXD0       ETH
+ * P1.10/ENET_RXD1                      ETH-RXD1
+ * P1.14/ENET_RX_ER                     ETH-RXER
+ * P1.15/ENET_REF_CLK                   ETH-REFCLK
+ * P1.16/ENET_MDC                       ETH-MDC
+ * P1.17/ENET_MDIO                      ETH-MDIO
+ * P1.18/USB_UP_LED/PWM1.1/CAP1.0       USB-UP-LED
+ * P1.19/MCOA0/nUSB_PPWR/CAP1.1         KEY1
+ * P1.20/MCFB0/PWM1.2/SCK0              LCD-SCK
+ * P1.21/MCABORT/PWM1.3/SSEL0           LCD-SSEL
+ * P1.22/MCOB0/USB_PWRD/MAT1.0          LCD-A0         LCD
+ * P1.23/MCFB1/PWM1.4/MISO0             NC
+ * P1.24/MCFB2/PWM1.5/MOSI0             LCD_MOSI
+ * P1.25/MCOA1/MAT1.1                   LCD-RST
+ * P1.26/MCOB1/PWM1.6/CAP0.0            LCD-AO
+ * P1.27/CLKOUT/nUSB_OVRCR/CAP0.1       KEY2
+ * P1.28/MCOA2/MAT0.0                   KEY3
+ * P1.29/MCOB2/PCAP1.1/MAT0.1           CAP1           PWM-CON
+ * P1.30/VBUS/AD0.4                     VBUS           USB
+ * P1.31/SCK1/AD0.5                     KEY4
+ */
+
+#define GPIO_ENET_MDC      GPIO_ENET_MDC_1
+#define GPIO_ENET_MDIO     GPIO_ENET_MDIO_1
+
+/* P2.0/PWM1.1/TXD1                     TXD1
+ * P2.1/PWM1.2/RXD1                     RXD1           COM1
+ * P2.2/PWM1.3/CTS1/TRACEDATA3          CTS1
+ * P2.3/PWM1.4/DCD1/TRACEDATA2          PWM4
+ * P2.4/PWM1.5/DSR1/TRACEDATA1          PWM5           PWM
+ * P2.5/PWM1.6/DTR1/TRACEDATA0          PWM6
+ * P2.6/PCAP1.0/RI1/TRACECLK            CAP0
+ * P2.7/RD2/RTS1 RD2                    RD2            CAN2
+ * P2.8/TD2/TXD2 TD2                    TD2
+ * P2.9/USB_CONNECT/RXD2                USB_CONNECT    USB
+ * P2.10/nEINT0/NMI                     ISP
+ * P2.11/nEINT1/I2STX_CLK               INT1           I2C
+ * P2.12/nEINT2/I2STX_WS                SD-DET         SD-CARD
+ * P2.13/nEINT3/I2STX_SDA               KEY5
+ */
+
+#define GPIO_PWM1p2        GPIO_PWM1p2_3
+#define GPIO_PWM1p3        GPIO_PWM1p3_3
+#define GPIO_PWM1p4        GPIO_PWM1p4_2
+#define GPIO_PWM1p5        GPIO_PWM1p5_2
+#define GPIO_PWM1p6        GPIO_PWM1p6_2
+
+/* P3.25/MAT0.0/PWM1.2                  PWM2           PWM
+ * P3.26/STCLK/MAT0.1/PWM1.3            PWM3
+ *
+ * P4.28/RX_MCLK/MAT2.0/TXD3            GPIO2          SPI
+ * P4.28/RX_MCLK/MAT2.0/TXD3            GPIO3
+ */
+
+/************************************************************************************
+ * Public Types
+ ************************************************************************************/
+
+#ifndef __ASSEMBLY__
+
+/************************************************************************************
+ * Public Data
+ ************************************************************************************/
+
+#undef EXTERN
+#if defined(__cplusplus)
+#define EXTERN extern "C"
+extern "C" {
+#else
+#define EXTERN extern
+#endif
+
+/************************************************************************************
+ * Public Function Prototypes
+ ************************************************************************************/
+/************************************************************************************
+ * Name: lpc17_boardinitialize
+ *
+ * Description:
+ *   All LPC17xx architectures must provide the following entry point.  This entry point
+ *   is called early in the intitialization -- after all memory has been configured
+ *   and mapped but before any devices have been initialized.
+ *
+ ************************************************************************************/
+
+void lpc17_boardinitialize(void);
+
+#undef EXTERN
+#if defined(__cplusplus)
+}
+#endif
+
+#endif /* __ASSEMBLY__ */
+#endif  /* __CONFIGS_ZKIT_ARM_1769_INCLUDE_BOARD_H */

configs/zkit-arm-1769/src/Makefile

@@ -0,0 +1,97 @@
+############################################################################
+# configs/zkit-arm-1769/src/Makefile
+#
+#   Copyright (C) 2013 Zilogic Systems. All rights reserved.
+#   Author: BabuSubashChandar <code@zilogic.com>
+#
+# Based on configs/lpcxpresso-lpc1768/src/Makefile
+#
+#   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <gnutt@nuttx.org>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+
+-include $(TOPDIR)/Make.defs
+
+CFLAGS		+= -I$(TOPDIR)/sched
+
+ASRCS		=
+CSRCS		= up_boot.c up_leds.c up_ssp.c
+
+ifeq ($(CONFIG_NSH_ARCHINIT),y)
+CSRCS		+= up_nsh.c
+endif
+
+ifeq ($(CONFIG_USBMSC),y)
+CSRCS		+= up_usbmsc.c
+endif
+
+AOBJS		= $(ASRCS:.S=$(OBJEXT))
+COBJS		= $(CSRCS:.c=$(OBJEXT))
+
+SRCS		= $(ASRCS) $(CSRCS)
+OBJS		= $(AOBJS) $(COBJS)
+
+ARCH_SRCDIR	= $(TOPDIR)/arch/$(CONFIG_ARCH)/src
+ifeq ($(WINTOOL),y)
+  CFLAGS	+= -I "${shell cygpath -w $(ARCH_SRCDIR)/chip}" \
+  		   -I "${shell cygpath -w $(ARCH_SRCDIR)/common}" \
+  		   -I "${shell cygpath -w $(ARCH_SRCDIR)/armv7-m}"
+else
+  CFLAGS	+= -I$(ARCH_SRCDIR)/chip -I$(ARCH_SRCDIR)/common -I$(ARCH_SRCDIR)/armv7-m
+endif
+
+all: libboard$(LIBEXT)
+
+$(AOBJS): %$(OBJEXT): %.S
+	$(call ASSEMBLE, $<, $@)
+
+$(COBJS) $(LINKOBJS): %$(OBJEXT): %.c
+	$(call COMPILE, $<, $@)
+
+libboard$(LIBEXT): $(OBJS)
+	@( for obj in $(OBJS) ; do \
+		$(call ARCHIVE, $@, $${obj}); \
+	done ; )
+
+.depend: Makefile $(SRCS)
+	@$(MKDEP) $(CC) -- $(CFLAGS) -- $(SRCS) >Make.dep
+	@touch $@
+
+depend: .depend
+
+clean:
+	@rm -f libboard$(LIBEXT) *~ .*.swp
+	$(call CLEAN)
+
+distclean: clean
+	@rm -f Make.dep .depend
+
+-include Make.dep

configs/zkit-arm-1769/src/up_boot.c

@@ -0,0 +1,98 @@
+/************************************************************************************
+ * configs/zkit-arm-1769/src/up_boot.c
+ * arch/arm/src/board/up_boot.c
+ *
+ *   Copyright (C) 2013 Zilogic Systems. All rights reserved.
+ *   Author: BabuSubashChandar <code@zilogic.com>
+ *
+ * Based on configs/lpcxpresso-lpc1768/src/up_boot.c
+ *
+ *   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************************************/
+
+/************************************************************************************
+ * Included Files
+ ************************************************************************************/
+
+#include <nuttx/config.h>
+
+#include <debug.h>
+
+#include <arch/board/board.h>
+
+#include "up_arch.h"
+#include "up_internal.h"
+
+#include "lpc17_internal.h"
+#include "zkitarm_internal.h"
+
+/************************************************************************************
+ * Definitions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Private Functions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Public Functions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Name: lpc17_boardinitialize
+ *
+ * Description:
+ *   All LPC17xx architectures must provide the following entry point.  This entry point
+ *   is called early in the intitialization -- after all memory has been configured
+ *   and mapped but before any devices have been initialized.
+ *
+ ************************************************************************************/
+
+void lpc17_boardinitialize(void)
+{
+  /* Configure SSP chip selects if 1) at least one SSP is enabled, and 2) the weak
+   * function lpc17_sspinitialize() has been brought into the link.
+   */
+
+#if defined(CONFIG_LPC17_SSP0) || defined(CONFIG_LPC17_SSP1)
+  if (lpc17_sspinitialize)
+    {
+      lpc17_sspinitialize();
+    }
+#endif
+
+  /* Configure on-board LEDs if LED support has been selected. */
+
+#ifdef CONFIG_ARCH_LEDS
+  up_ledinit();
+#endif
+}

configs/zkit-arm-1769/src/up_leds.c

@@ -0,0 +1,161 @@
+/****************************************************************************
+ * configs/zkit-arm-1769/src/up_leds.c
+ * arch/arm/src/board/up_leds.c
+ *
+ *   Copyright (C) 2013 Zilogic Systems. All rights reserved.
+ *   Author: BabuSubashChandar <code@zilogic.com>
+ *
+ * Based on configs/lpcxpresso-lpc1768/src/up_leds.c
+ *
+ *   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+
+#include <stdbool.h>
+#include <debug.h>
+
+#include "up_arch.h"
+#include "up_internal.h"
+
+#include "lpc17_internal.h"
+#include "zkitarm_internal.h"
+
+#ifdef CONFIG_ARCH_LEDS
+
+/****************************************************************************
+ * Definitions
+ ****************************************************************************/
+
+/* CONFIG_DEBUG_LED enables debug output from this file (needs CONFIG_DEBUG
+ * and pherhaps CONFIG_DEBUG_VERBOSE too)
+ */
+
+#ifdef CONFIG_DEBUG_LED
+#  define leddbg  lldbg
+#  ifdef CONFIG_DEBUG_VERBOSE
+#    define ledvdbg lldbg
+#  else
+#    define ledvdbg(x...)
+#  endif
+#else
+#  define leddbg(x...)
+#  define ledvdbg(x...)
+#endif
+
+/****************************************************************************
+ * Private Data
+ ****************************************************************************/
+
+static bool g_ncstate;
+
+/****************************************************************************
+ * Private Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Public Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: up_ledinit
+ ****************************************************************************/
+
+void up_ledinit(void)
+{
+  /* Configure all LED GPIO lines */
+
+  lpc17_configgpio(ZKITARM_LED1);
+  lpc17_configgpio(ZKITARM_LED2);
+  g_ncstate = true;
+}
+
+/****************************************************************************
+ * Name: up_ledon
+ ****************************************************************************/
+
+void up_ledon(int led)
+{
+  bool off;
+
+  switch (led)
+    {
+    case 0:
+    case 2:
+      off = true;
+      break;
+
+    case 1:
+      off   = false;
+      g_ncstate = false;
+      break;
+
+    default:
+      return;
+    }
+
+  lpc17_gpiowrite(ZKITARM_LED1, off);
+  lpc17_gpiowrite(ZKITARM_LED2, off);
+}
+
+/****************************************************************************
+ * Name: up_ledoff
+ ****************************************************************************/
+
+void up_ledoff(int led)
+{
+  bool off;
+
+  switch (led)
+    {
+    case 0:
+    case 1:
+      off = false;
+      break;
+
+    case 2:
+      off = g_ncstate;
+      break;
+
+    default:
+      return;
+    }
+
+  lpc17_gpiowrite(ZKITARM_LED1, off);
+  lpc17_gpiowrite(ZKITARM_LED2, off);
+}
+
+#endif /* CONFIG_ARCH_LEDS */

configs/zkit-arm-1769/src/up_nsh.c

@@ -0,0 +1,176 @@
+/****************************************************************************
+ * config/zkit-arm-1769/src/up_nsh.c
+ * arch/arm/src/board/up_nsh.c
+ *
+ *   Copyright (C) 2013 Zilogic Systems. All rights reserved.
+ *   Author: BabuSubashChandar <code@zilogic.com>
+ *
+ * Based on config/lpcxpresso-lpc1768/src/up_nsh.c
+ *
+ *   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+
+#include <stdio.h>
+#include <debug.h>
+#include <errno.h>
+
+#include <nuttx/spi.h>
+#include <nuttx/mmcsd.h>
+
+/****************************************************************************
+ * Pre-Processor Definitions
+ ****************************************************************************/
+
+/* Configuration ************************************************************/
+
+/* PORT and SLOT number probably depend on the board configuration */
+
+#ifdef CONFIG_ARCH_BOARD_ZKITARM
+#  define CONFIG_NSH_HAVEUSBDEV 1
+#  ifdef CONFIG_LPC17_SSP0
+#    define CONFIG_NSH_HAVEMMCSD 1
+#  else
+#    undef CONFIG_NSH_HAVEMMCSD
+#  endif
+#else
+#  error "Unrecognized board"
+#  undef CONFIG_NSH_HAVEUSBDEV
+#  undef CONFIG_NSH_HAVEMMCSD
+#endif
+
+/* Do we have SPI support for MMC/SD? */
+
+#ifdef CONFIG_NSH_HAVEMMCSD
+#  if !defined(CONFIG_NSH_MMCSDSPIPORTNO) || CONFIG_NSH_MMCSDSPIPORTNO != 0
+#    error "The ZKit-arm MMC/SD is on SSP0"
+#    undef CONFIG_NSH_MMCSDSPIPORTNO
+#    define CONFIG_NSH_MMCSDSPIPORTNO 0
+#  endif
+#  if !defined(CONFIG_NSH_MMCSDSLOTNO) || CONFIG_NSH_MMCSDSLOTNO != 0
+#    error "The ZKit-arm MMC/SD has only one slot (0)"
+#    undef CONFIG_NSH_MMCSDSLOTNO
+#    define CONFIG_NSH_MMCSDSLOTNO 0
+#  endif
+#endif
+
+/* Can't support USB device features if USB device is not enabled */
+
+#ifndef CONFIG_USBDEV
+#  undef CONFIG_NSH_HAVEUSBDEV
+#endif
+
+/* Can't support MMC/SD features if mountpoints are disabled */
+
+#if defined(CONFIG_DISABLE_MOUNTPOINT)
+#  undef CONFIG_NSH_HAVEMMCSD
+#endif
+
+#ifndef CONFIG_NSH_MMCSDMINOR
+#  define CONFIG_NSH_MMCSDMINOR 0
+#endif
+
+/* Debug ********************************************************************/
+
+#ifdef CONFIG_CPP_HAVE_VARARGS
+#  ifdef CONFIG_DEBUG
+#    define message(...) lib_lowprintf(__VA_ARGS__)
+#  else
+#    define message(...) printf(__VA_ARGS__)
+#  endif
+#else
+#  ifdef CONFIG_DEBUG
+#    define message lib_lowprintf
+#  else
+#    define message printf
+#  endif
+#endif
+
+/****************************************************************************
+ * Private Data
+ ****************************************************************************/
+
+/****************************************************************************
+ * Private Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Public Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: nsh_archinitialize
+ *
+ * Description:
+ *   Perform architecture specific initialization
+ *
+ ****************************************************************************/
+
+int nsh_archinitialize(void)
+{
+#ifdef CONFIG_NSH_HAVEMMCSD
+  FAR struct spi_dev_s *ssp;
+  int ret;
+
+  /* Get the SSP port */
+
+  ssp = up_spiinitialize(CONFIG_NSH_MMCSDSPIPORTNO);
+  if (!ssp)
+    {
+      message("nsh_archinitialize: Failed to initialize SSP port %d\n",
+              CONFIG_NSH_MMCSDSPIPORTNO);
+      return -ENODEV;
+    }
+
+  message("Successfully initialized SSP port %d\n",
+          CONFIG_NSH_MMCSDSPIPORTNO);
+
+  /* Bind the SSP port to the slot */
+
+  ret = mmcsd_spislotinitialize(CONFIG_NSH_MMCSDMINOR, CONFIG_NSH_MMCSDSLOTNO, ssp);
+  if (ret < 0)
+    {
+      message("nsh_archinitialize: Failed to bind SSP port %d to MMC/SD slot %d: %d\n",
+              CONFIG_NSH_MMCSDSPIPORTNO, CONFIG_NSH_MMCSDSLOTNO, ret);
+      return ret;
+    }
+
+  message("Successfuly bound SSP port %d to MMC/SD slot %d\n",
+          CONFIG_NSH_MMCSDSPIPORTNO, CONFIG_NSH_MMCSDSLOTNO);
+#endif
+  return OK;
+}

configs/zkit-arm-1769/src/up_ssp.c

@@ -0,0 +1,214 @@
+/************************************************************************************
+ * configs/zkit-arm-1769/src/up_ssp.c
+ * arch/arm/src/board/up_ssp.c
+ *
+ *   Copyright (C) 2013 Zilogic Systems. All rights reserved.
+ *   Author: BabuSubashChandar <code@zilogic.com>
+ *
+ * Based on configs/lpcxpresso-lpc1768/src/up_ssp.c
+ *
+ *   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************************************/
+
+/************************************************************************************
+ * Included Files
+ ************************************************************************************/
+
+#include <nuttx/config.h>
+
+#include <stdint.h>
+#include <stdbool.h>
+#include <debug.h>
+
+#include <nuttx/spi.h>
+#include <arch/board/board.h>
+
+#include "up_arch.h"
+#include "chip.h"
+#include "lpc17_internal.h"
+#include "zkitarm_internal.h"
+
+#if defined(CONFIG_LPC17_SSP0) || defined(CONFIG_LPC17_SSP1)
+
+/************************************************************************************
+ * Definitions
+ ************************************************************************************/
+
+/* CONFIG_DEBUG_SPI enables debug output from this file (needs CONFIG_DEBUG too) */
+
+#ifdef CONFIG_DEBUG_SPI
+#  define sspdbg  lldbg
+#  ifdef CONFIG_DEBUG_VERBOSE
+#    define sspvdbg lldbg
+#  else
+#    define sspvdbg(x...)
+#  endif
+#else
+#  define sspdbg(x...)
+#  define sspvdbg(x...)
+#endif
+
+/* Dump GPIO registers */
+
+#if defined(CONFIG_DEBUG_SPI) && defined(CONFIG_DEBUG_VERBOSE)
+#  define ssp_dumpgpio(m) lpc17_dumpgpio(SDCCS_GPIO, m)
+#else
+#  define ssp_dumpgpio(m)
+#endif
+
+/************************************************************************************
+ * Private Functions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Public Functions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Name: lpc17_sspinitialize
+ *
+ * Description:
+ *   Called to configure SPI chip select GPIO pins for the LM3S6965 Eval Kit.
+ *
+ ************************************************************************************/
+
+void weak_function lpc17_sspinitialize(void)
+{
+  /* Configure the SPI-based microSD CS GPIO */
+
+  ssp_dumpgpio("lpc17_sspinitialize() Entry)");
+
+  /* Configure card detect and chip select for the SD slot.  NOTE:  Jumper J55 must
+   * be set correctly for the SD slot chip select.
+   */
+
+#ifdef CONFIG_LPC17_SSP0
+  (void)lpc17_configgpio(ZKITARM_SD_CS);
+  (void)lpc17_configgpio(ZKITARM_SD_CD);
+
+  /* Configure chip select for the OLED. For the SPI interface, insert jumpers in
+   * J42, J43, J45 pin1-2 and J46 pin 1-2.
+   */
+
+#ifdef CONFIG_NX_LCDDRIVER
+  (void)lpc17_configgpio(ZKITARM_OLED_CS);
+#endif
+#endif
+
+  ssp_dumpgpio("lpc17_sspinitialize() Exit");
+}
+
+/************************************************************************************
+ * Name:  lpc17_ssp0/ssp1select and lpc17_ssp0/ssp1status
+ *
+ * Description:
+ *   The external functions, lpc17_ssp0/ssp1select and lpc17_ssp0/ssp1status
+ *   must be provided by board-specific logic.  They are implementations of the select
+ *   and status methods of the SPI interface defined by struct spi_ops_s (see
+ *   include/nuttx/spi.h). All other methods (including up_spiinitialize())
+ *   are provided by common LPC17xx logic.  To use this common SPI logic on your
+ *   board:
+ *
+ *   1. Provide logic in lpc17_boardinitialize() to configure SPI/SSP chip select
+ *      pins.
+ *   2. Provide lpc17_ssp0/ssp1select() and lpc17_ssp0/ssp1status() functions
+ *      in your board-specific logic.  These functions will perform chip selection
+ *      and status operations using GPIOs in the way your board is configured.
+ *   3. Add a calls to up_spiinitialize() in your low level application
+ *      initialization logic
+ *   4. The handle returned by up_spiinitialize() may then be used to bind the
+ *      SPI driver to higher level logic (e.g., calling
+ *      mmcsd_spislotinitialize(), for example, will bind the SPI driver to
+ *      the SPI MMC/SD driver).
+ *
+ ************************************************************************************/
+
+#ifdef CONFIG_LPC17_SSP1
+void  lpc17_ssp1select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected)
+{
+  sspdbg("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
+  ssp_dumpgpio("lpc17_spi1select() Entry");
+
+#warning "Assert CS here (false)"
+
+  ssp_dumpgpio("lpc17_spi1select() Exit");
+}
+
+uint8_t lpc17_ssp1status(FAR struct spi_dev_s *dev, enum spi_dev_e devid)
+{
+  sspdbg("Returning SPI_STATUS_PRESENT\n");
+  return SPI_STATUS_PRESENT;
+}
+#endif
+
+#ifdef CONFIG_LPC17_SSP0
+void  lpc17_ssp0select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected)
+{
+  sspdbg("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
+  ssp_dumpgpio("lpc17_spi0select() Entry");
+
+  if (devid == SPIDEV_MMCSD)
+    {
+      /* Assert/de-assert the CS pin to the card */
+
+      (void)lpc17_gpiowrite(ZKITARM_SD_CS, !selected);
+    }
+#ifdef CONFIG_NX_LCDDRIVER
+  else if (devid == SPIDEV_DISPLAY)
+    {
+      /* Assert the CS pin to the OLED display */
+
+      (void)lpc17_gpiowrite(ZKITARM_OLED_CS, !selected);
+    }
+#endif
+  ssp_dumpgpio("lpc17_spi0select() Exit");
+}
+
+uint8_t lpc17_ssp0status(FAR struct spi_dev_s *dev, enum spi_dev_e devid)
+{
+  if (devid == SPIDEV_MMCSD)
+    {
+      /* Read the state of the card-detect bit */
+
+      if (lpc17_gpioread(ZKITARM_SD_CD) == 0)
+        {
+          sspdbg("Returning SPI_STATUS_PRESENT\n");
+          return SPI_STATUS_PRESENT;
+        }
+    }
+
+  sspdbg("Returning zero\n");
+  return 0;
+}
+#endif
+
+#endif /* CONFIG_LPC17_SSP0 || CONFIG_LPC17_SSP1 */

configs/zkit-arm-1769/src/up_usbmsc.c

@@ -0,0 +1,147 @@
+/****************************************************************************
+ * configs/zkit-arm-1769/src/up_usbmsc.c
+ *
+ *   Copyright (C) 2013 Zilogic Systems. All rights reserved.
+ *   Author: BabuSubashChandar <code@zilogic.com>
+ *
+ * Based on configs/lpcxpresso-lpc1768/src/up_usbmsc.c
+ *
+ *   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
+ *
+ * Configure and register the LPC17xx MMC/SD SPI block driver.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+
+#include <stdio.h>
+#include <debug.h>
+#include <errno.h>
+
+#include <nuttx/spi.h>
+#include <nuttx/mmcsd.h>
+
+/****************************************************************************
+ * Pre-Processor Definitions
+ ****************************************************************************/
+
+/* Configuration ************************************************************/
+
+#ifndef CONFIG_EXAMPLES_USBMSC_DEVMINOR1
+#  define CONFIG_EXAMPLES_USBMSC_DEVMINOR1 0
+#endif
+
+/* PORT and SLOT number probably depend on the board configuration */
+
+#ifdef CONFIG_ARCH_BOARD_ZKITARM
+#  undef LPC17XX_MMCSDSPIPORTNO
+#  define LPC17XX_MMCSDSPIPORTNO 0
+#  undef LPC17XX_MMCSDSLOTNO
+#  define LPC17XX_MMCSDSLOTNO 0
+#else
+   /* Add configuration for new LPC17xx boards here */
+#  error "Unrecognized LPC17xx board"
+#endif
+
+/* Debug ********************************************************************/
+
+#ifdef CONFIG_CPP_HAVE_VARARGS
+#  ifdef CONFIG_DEBUG
+#    define message(...) lib_lowprintf(__VA_ARGS__)
+#    define msgflush()
+#  else
+#    define message(...) printf(__VA_ARGS__)
+#    define msgflush() fflush(stdout)
+#  endif
+#else
+#  ifdef CONFIG_DEBUG
+#    define message lib_lowprintf
+#    define msgflush()
+#  else
+#    define message printf
+#    define msgflush() fflush(stdout)
+#  endif
+#endif
+
+/****************************************************************************
+ * Public Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: usbmsc_archinitialize
+ *
+ * Description:
+ *   Perform architecture specific initialization
+ *
+ ****************************************************************************/
+
+int usbmsc_archinitialize(void)
+{
+  FAR struct spi_dev_s *spi;
+  int ret;
+
+  /* Get the SPI port */
+
+  message("usbmsc_archinitialize: Initializing SPI port %d\n",
+          LPC17XX_MMCSDSPIPORTNO);
+
+  spi = up_spiinitialize(LPC17XX_MMCSDSPIPORTNO);
+  if (!spi)
+    {
+      message("usbmsc_archinitialize: Failed to initialize SPI port %d\n",
+              LPC17XX_MMCSDSPIPORTNO);
+      return -ENODEV;
+    }
+
+  message("usbmsc_archinitialize: Successfully initialized SPI port %d\n",
+          LPC17XX_MMCSDSPIPORTNO);
+
+  /* Bind the SPI port to the slot */
+
+  message("usbmsc_archinitialize: Binding SPI port %d to MMC/SD slot %d\n",
+          LPC17XX_MMCSDSPIPORTNO, LPC17XX_MMCSDSLOTNO);
+
+  ret = mmcsd_spislotinitialize(CONFIG_EXAMPLES_USBMSC_DEVMINOR1, LPC17XX_MMCSDSLOTNO, spi);
+  if (ret < 0)
+    {
+      message("usbmsc_archinitialize: Failed to bind SPI port %d to MMC/SD slot %d: %d\n",
+              LPC17XX_MMCSDSPIPORTNO, LPC17XX_MMCSDSLOTNO, ret);
+      return ret;
+    }
+
+  message("usbmsc_archinitialize: Successfuly bound SPI port %d to MMC/SD slot %d\n",
+          LPC17XX_MMCSDSPIPORTNO, LPC17XX_MMCSDSLOTNO);
+  return OK;
+}

configs/zkit-arm-1769/src/zkitarm_internal.h

@@ -0,0 +1,236 @@
+/************************************************************************************
+ * configs/zkit-arm-1769/src/zkitarm_internal.h
+ * arch/arm/src/board/zkitarm_internal.n
+ *
+ *   Copyright (C) 2013 Zilogic Systems. All rights reserved.
+ *   Author: BabuSubashChandar <code@zilogic.com>
+ *
+ * Based on configs/lpcxpresso-lpc1768/src/lpcxpresso_internal.h
+ *
+ *   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************************************/
+
+#ifndef _CONFIGS_ZKITARM_LPC1768_SRC_ZKITARM_INTERNAL_H
+#define _CONFIGS_ZKITARM_LPC1768_SRC_ZKITARM_INTERNAL_H
+
+/************************************************************************************
+ * Included Files
+ ************************************************************************************/
+
+#include <nuttx/config.h>
+#include <nuttx/compiler.h>
+
+/************************************************************************************
+ * Definitions
+ ************************************************************************************/
+/************************************************************************************
+ * ZKit-ARM-1769 Pin Usage
+ ************************************************************************************/
+/*  Pin Description                      On Board       Connector
+ *  -------------------------------- ---------------- -------------
+ *  P0.0/RD1/TXD3/SDA1                   RD1            AUX-CON
+ *  P0.1/TD1/RXD3/SCL1                   TD1
+ *  P0.2/TXD0/AD0.7                      TXD0           COM0
+ *  P0.3/RXD0/AD0.6                      RXD0
+ *  P0.4/I2SRX_CLK/RD2/CAP2.0            GPIO0
+ *  P0.5/I2SRX_WS/TD2/CAP2.1             GPIO1
+ *  P0.6/I2SRX_SDA/SSEL1/MAT2.0          SSEL1          SPI
+ *  P0.7/I2STX_CLK/SCK1/MAT2.1           SCK1
+ *  P0.8/I2STX_WS/MISO1/MAT2.2           MISO1
+ *  P0.9/I2STX_SDA/MOSI1/MAT2.3          MOSI1
+ *  P0.10/TXD2/SDA2/MAT3.0               TXD2           AUX-CON
+ *  P0.11/RXD2/SCL2/MAT3.1               RXD2
+ *  P0.15/TXD1/SCK0/SCK                  SD-SCK
+ *  P0.16/RXD1/SSEL0/SSEL                SD-SSEL        SD-CARD
+ *  P0.17/CTS1/MISO0/MISO                SD-MISO
+ *  P0.18/DCD1/M0SI0/MOSI                SD-MOSI
+ *  P0.19/DSR1/SDA1                      LED1
+ *  P0.20/DTR1/SCL1                      DTR1           COM1
+ *  P0.21/RI1/RD1 N.C                    LED2
+ *  P0.22/RTS1/TD1                       RTS1           COM1
+ *  P0.23/AD0.0/I2SRX_CLK/CAP3.0         AD0
+ *  P0.24/AD0.1/I2SRX_WS/CAP3.1          AD1            AIN
+ *  P0.25/AD0.2/I2SRX_SDA/TXD3           AD2
+ *  P0.26/AD0.3/AOUT/RXD3                AD3
+ *  P0.27/SDA0/USB_SDA                   SDA0           I2C0
+ *  P0.28/SCL0/USB_SCL                   SCL0
+ *  P0.29/USB_D+                         USB-D+         USB
+ *  P0.30/USB_D-                         USB-D-
+ *
+ *  P1.0/ENET_TXD0                       ETH-TXD0
+ *  P1.1/ENET_TXD1                       ETH-TXD1
+ *  P1.4/ENET_TX_EN                      ETH-TXEN
+ *  P1.8/ENET_CRS                        ETH-CRS
+ *  P1.9/ENET_RXD0                       ETH-RXD0       ETH
+ *  P1.10/ENET_RXD1                      ETH-RXD1
+ *  P1.14/ENET_RX_ER                     ETH-RXER
+ *  P1.15/ENET_REF_CLK                   ETH-REFCLK
+ *  P1.16/ENET_MDC                       ETH-MDC
+ *  P1.17/ENET_MDIO                      ETH-MDIO
+ *  P1.18/USB_UP_LED/PWM1.1/CAP1.0       USB-UP-LED
+ *  P1.19/MCOA0/nUSB_PPWR/CAP1.1         KEY1
+ *  P1.20/MCFB0/PWM1.2/SCK0              LCD-SCK
+ *  P1.21/MCABORT/PWM1.3/SSEL0           LCD-SSEL
+ *  P1.22/MCOB0/USB_PWRD/MAT1.0          LCD-A0         LCD
+ *  P1.23/MCFB1/PWM1.4/MISO0             NC
+ *  P1.24/MCFB2/PWM1.5/MOSI0             LCD_MOSI
+ *  P1.25/MCOA1/MAT1.1                   LCD-RST
+ *  P1.26/MCOB1/PWM1.6/CAP0.0            LCD-AO
+ *  P1.27/CLKOUT/nUSB_OVRCR/CAP0.1       KEY2
+ *  P1.28/MCOA2/MAT0.0                   KEY3
+ *  P1.29/MCOB2/PCAP1.1/MAT0.1           CAP1           PWM-CON
+ *  P1.30/VBUS/AD0.4                     VBUS           USB
+ *  P1.31/SCK1/AD0.5                     KEY4
+ *
+ *  P2.0/PWM1.1/TXD1                     TXD1
+ *  P2.1/PWM1.2/RXD1                     RXD1           COM1
+ *  P2.2/PWM1.3/CTS1/TRACEDATA3          CTS1
+ *  P2.3/PWM1.4/DCD1/TRACEDATA2          PWM4
+ *  P2.4/PWM1.5/DSR1/TRACEDATA1          PWM5           PWM
+ *  P2.5/PWM1.6/DTR1/TRACEDATA0          PWM6
+ *  P2.6/PCAP1.0/RI1/TRACECLK            CAP0
+ *  P2.7/RD2/RTS1 RD2                    RD2            CAN2
+ *  P2.8/TD2/TXD2 TD2                    TD2
+ *  P2.9/USB_CONNECT/RXD2                USB_CONNECT    USB
+ *  P2.10/nEINT0/NMI                     ISP
+ *  P2.11/nEINT1/I2STX_CLK               INT1           I2C
+ *  P2.12/nEINT2/I2STX_WS                SD-DET         SD-CARD
+ *  P2.13/nEINT3/I2STX_SDA               KEY5
+ *
+ *  P3.25/MAT0.0/PWM1.2                  PWM2           PWM
+ *  P3.26/STCLK/MAT0.1/PWM1.3            PWM3
+ *
+ *  P4.28/RX_MCLK/MAT2.0/TXD3            GPIO2          SPI
+ *  P4.28/RX_MCLK/MAT2.0/TXD3            GPIO3
+ */
+
+#define ZKITARM_I2C1_EPROM_SDA GPIO_I2C1_SDA
+#define ZKITARM_I2C1_EPROM_SDL GPIO_I2C1_SCL
+
+#define ZKITARM_LED1 (GPIO_OUTPUT | GPIO_VALUE_ONE | GPIO_PORT0 | GPIO_PIN19)
+#define ZKITARM_LED2 (GPIO_OUTPUT | GPIO_VALUE_ONE | GPIO_PORT0 | GPIO_PIN21)
+
+#define ZKITARM_KEY5 (GPIO_INTBOTH | GPIO_FLOAT | GPIO_PORT2 | GPIO_PIN13)
+
+#define ZKITARM_KEY5_IRQ LPC17_IRQ_P2p13
+
+/* SD Slot
+ *
+ *       Board        LPC1768
+ *  SD   Signal       Pin
+ *  ---  -----------  ----------
+ *  CS   SD-SSEL       P0.16
+ *  DIN  SD-MOSI       P0.18 MOSI0
+ *  DOUT SD-MISO       P0.17 MISO0
+ *  CLK  SD-SCK        P0.15 SCK0
+ *  CD   SD-DET        P2.12
+ */
+
+#define ZKITARM_SD_CS (GPIO_OUTPUT | GPIO_VALUE_ONE | GPIO_PORT0 | GPIO_PIN16)
+#ifdef CONFIG_GPIO_IRQ
+#  define ZKITARM_SD_CD (GPIO_INTBOTH | GPIO_PULLUP | GPIO_PORT2 | GPIO_PIN12)
+#else
+#  define ZKITARM_SD_CD (GPIO_INPUT   | GPIO_PULLUP | GPIO_PORT2 | GPIO_PIN12)
+#endif
+
+#define ZKITARM_SD_CDIRQ LPC17_IRQ_P2p12
+
+/* USB:
+ *
+ *   Board               LPC1768
+ *   Signal              Pin
+ *   ------------------- --------
+ *   USB_CONNECT         P2.9  USB_CONNECT
+ *   USB_DM              P0.29 USB_D-
+ *   USB_DP              P0.30 USB_D+
+ *   USB_VBUS            P1.30 USB_VBUS
+ *   USB_UPLED           P1.18 USB_UPLED
+ *
+ */
+
+#define ZKITARM_USB_CONNECT (GPIO_OUTPUT | GPIO_VALUE_ONE | GPIO_PORT2 | GPIO_PIN9)
+#ifdef CONFIG_GPIO_IRQ
+#  define ZKITARM_USB_VBUSSENSE (GPIO_INTBOTH | GPIO_PULLUP | GPIO_PORT1 | GPIO_PIN30)
+#else
+#  define ZKITARM_USB_VBUSSENSE (GPIO_INPUT   | GPIO_PULLUP | GPIO_PORT1 | GPIO_PIN30)
+#endif
+
+/* 128x64 LCD with SPI interface
+ * ---------------------------------------
+ * The LCD display is connected to the SPI-bus.
+ *
+ *   ZKit-ARM Signals
+ *
+ *     ----------------------------+---------------+--------------------------------------------
+ *     LPC1758 Pin                 | Board Signal  |        Description
+ *     ----------------------------+---------------+--------------------------------------------
+ *     P1.20/MCFB0/PWM1.2/SCK0     |  LCD-SCK      | LCD Clock signal (D6)
+ *     P1.21/MCABORT/PWM1.3/SSEL0  |  LCD-SSEL     | LCD Chip Select  (CSB)
+ *     P1.22/MCOB0/USB_PWRD/MAT1.0 |  LCD-A0       | LCD-A0 (A0)
+ *     P1.23/MCFB1/PWM1.4/MISO0    |  N.C          |
+ *     P1.24/MCFB2/PWM1.5/MOSI0    |  LCD-MOSI     | LCD Data (D7)
+ *     P1.25/MCOA1/MAT1.1          |  LCD-RST      | LCD Reset (RSTB) - Resets Everything in LCD
+ *     ----------------------------+---------------+--------------------------------------------
+ */
+
+#if 0
+#define ZKITARM_OLED_POWER (GPIO_OUTPUT | GPIO_VALUE_ZERO | GPIO_PORT2 | GPIO_PIN1)
+#define ZKITARM_OLED_CS    (GPIO_OUTPUT | GPIO_VALUE_ONE  | GPIO_PORT0 | GPIO_PIN6)
+#define ZKITARM_OLED_DC    (GPIO_OUTPUT | GPIO_VALUE_ZERO | GPIO_PORT2 | GPIO_PIN7)
+#endif
+
+/************************************************************************************
+ * Public Types
+ ************************************************************************************/
+
+/************************************************************************************
+ * Public data
+ ************************************************************************************/
+
+#ifndef __ASSEMBLY__
+
+/************************************************************************************
+ * Public Functions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Name: lpc17_sspinitialize
+ *
+ * Description:
+ *   Called to configure SPI chip select GPIO pins for the LPCXpresso board.
+ *
+ ************************************************************************************/
+
+void weak_function lpc17_sspinitialize(void);
+
+#endif /* __ASSEMBLY__ */
+#endif /* _CONFIGS_ZKITARM_LPC1768_SRC_ZKITARM_INTERNAL_H */