Fix some recurring typos: postion->position, *atino->*ation

Documentation/NuttXCCodingStandard.html

@@ -1392,7 +1392,7 @@ struct xyz_info_s
 <h2>2.7 <a name="enumerations">Enumerations</a></h2>
 <p>
   <b>Enumeration Naming</b>.
-  Naming of enumeratinos follow the same naming rules as for <a href="#structures">structure</a> and <a href=#unions">union</a> naming.
+  Naming of enumerations follow the same naming rules as for <a href="#structures">structure</a> and <a href=#unions">union</a> naming.
   The only difference is that the suffix <code>_e</code> is used to identify an enumeration.
 </p>
 <p>

configs/stm3220g-eval/src/up_stmpe811.c

@@ -227,7 +227,7 @@ static void stmpe811_enable(FAR struct stmpe811_config_s *state, bool enable)
 
   /* Attach and enable, or detach and disable.  Enabling and disabling GPIO
    * interrupts is a multi-step process so the safest thing is to keep
-   * interrupts disabled during the reconfiguratino.
+   * interrupts disabled during the reconfiguration.
    */
 
   flags = irqsave();

configs/stm3240g-eval/src/up_stmpe811.c

@@ -227,7 +227,7 @@ static void stmpe811_enable(FAR struct stmpe811_config_s *state, bool enable)
 
   /* Attach and enable, or detach and disable.  Enabling and disabling GPIO
    * interrupts is a multi-step process so the safest thing is to keep
-   * interrupts disabled during the reconfiguratino.
+   * interrupts disabled during the reconfiguration.
    */
 
   flags = irqsave();

drivers/usbdev/Kconfig

@@ -552,7 +552,7 @@ config USBMSC_BULKOUTREQLEN
 		the completed READ request to the caller as each packet is received.
 		Therefore, there is no benefit in increasing the size of this buffer
 		beyond the maximum size of one packet.  Default:  512 or 64 bytes
-		(depending upon if dual speed operatino is supported or not).
+		(depending upon if dual speed operation is supported or not).
 
 config USBMSC_VENDORID
 	hex "Mass storage Vendor ID"

drivers/usbhost/usbhost_skeleton.c

@@ -175,7 +175,7 @@ static int usbhost_disconnected(FAR struct usbhost_class_s *class);
  * Private Data
  ****************************************************************************/
 
-/* This structure provides the registry entry ID informatino that will  be
+/* This structure provides the registry entry ID information that will  be
  * used to associate the USB class driver to a connected USB device.
  */
 

drivers/usbhost/usbhost_storage.c

@@ -257,7 +257,7 @@ static int usbhost_ioctl(FAR struct inode *inode, int cmd,
  * Private Data
  ****************************************************************************/
 
-/* This structure provides the registry entry ID informatino that will  be
+/* This structure provides the registry entry ID information that will  be
  * used to associate the USB host mass storage class to a connected USB
  * device.
  */

graphics/nxglib/fb/nxglib_moverectangle.c

@@ -189,7 +189,7 @@ void NXGL_FUNCNAME(nxgl_moverectangle,NXGLIB_SUFFIX)
 
   /* Case 1:  Is the destination position above the displayed position?
    * If the destination position is less then then the src address, then the
-   * destination is offset to a postion below (and or to the left) of the
+   * destination is offset to a position below (and or to the left) of the
    * source in framebuffer memory.
    */
 

libc/wqueue/work_thread.c

@@ -233,7 +233,7 @@ static void work_process(FAR struct wqueue_s *wqueue)
  *     These worker threads are started by the OS during normal bringup.
  *
  *   work_usrthread:  This is a user mode work queue.  It must be built into
- *     the applicatino blob during the user phase of a kernel build.  The
+ *     the application blob during the user phase of a kernel build.  The
  *     user work thread will then automatically be started when the system
  *     boots by calling through the pointer found in the header on the user
  *     space blob.

sched/task_reparent.c

@@ -85,7 +85,7 @@ int task_reparent(pid_t ppid, pid_t chpid)
   irqstate_t flags;
   int ret;
 
-  /* Disable interrupts so that nothing can change in the relatinoship of
+  /* Disable interrupts so that nothing can change in the relationship of
    * the three task:  Child, current parent, and new parent.
    */
 
@@ -217,7 +217,7 @@ int task_reparent(pid_t ppid, pid_t chpid)
   irqstate_t flags;
   int ret;
 
-  /* Disable interrupts so that nothing can change in the relatinoship of
+  /* Disable interrupts so that nothing can change in the relationship of
    * the three task:  Child, current parent, and new parent.
    */
 

tools/configure.c

@@ -80,7 +80,7 @@ static const char *g_boarddir      = NULL;  /* Name of board subdirectory */
 static char       *g_configdir     = NULL;  /* Name of configuration subdirectory */
 
 static char       *g_topdir        = NULL;  /* Full path to top-level NuttX build directory */
-static char       *g_apppath       = NULL;  /* Full path to the applicatino directory */
+static char       *g_apppath       = NULL;  /* Full path to the application directory */
 static char       *g_configtop     = NULL;  /* Full path to the top-level configuration directory */
 static char       *g_configpath    = NULL;  /* Full path to the configuration sub-directory */
 static char       *g_verstring     = "0.0"; /* Version String */