LPC11xx: Add support for up_getc() which is needed for NSH if there is no file system. From Alan Carvalho de Assis.

arch/arm/src/lpc11xx/Make.defs

@@ -69,8 +69,8 @@ endif
 
 CHIP_ASRCS  =
 CHIP_CSRCS  = lpc11_clockconfig.c lpc11_gpio.c lpc11_i2c.c lpc11_idle.c
-CHIP_CSRCS += lpc11_irq.c lpc11_lowputc.c lpc11_serial.c lpc11_spi.c
+CHIP_CSRCS += lpc11_irq.c lpc11_lowputc.c lpc11_lowgetc.c lpc11_serial.c
-CHIP_CSRCS += lpc11_ssp.c lpc11_start.c
+CHIP_CSRCS += lpc11_spi.c lpc11_ssp.c lpc11_start.c
 
 # Configuration-dependent LPC11xx files
 

arch/arm/src/lpc11xx/lpc11_lowgetc.c

@@ -0,0 +1,131 @@
+/**************************************************************************
+ * arch/arm/src/lpc11/lpc11_lowgetc.c
+ *
+ *   Copyright (C) 2013 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ **************************************************************************/
+
+/**************************************************************************
+ * Included Files
+ **************************************************************************/
+
+#include <nuttx/config.h>
+
+#include <stdint.h>
+
+#include <arch/irq.h>
+#include <arch/board/board.h>
+
+#include "up_internal.h"
+#include "up_arch.h"
+
+#include "chip/lpc11_syscon.h"
+#include "chip/lpc11_uart.h"
+
+#include "lpc11_gpio.h"
+#include "lpc11_lowgetc.h"
+#include "lpc11_serial.h"
+
+/**************************************************************************
+ * Pre-processor Definitions
+ **************************************************************************/
+/* Select UART parameters for the selected console */
+
+#if defined(CONFIG_UART0_SERIAL_CONSOLE)
+#  define CONSOLE_BASE     LPC11_UART0_BASE
+#  define CONSOLE_FREQ     BOARD_CORECLK_FREQ
+#  define CONSOLE_BAUD     CONFIG_UART0_BAUD
+#  define CONSOLE_BITS     CONFIG_UART0_BITS
+#  define CONSOLE_PARITY   CONFIG_UART0_PARITY
+#elif defined(CONFIG_UART1_SERIAL_CONSOLE)
+#  define CONSOLE_BASE     LPC11_UART1_BASE
+#  define CONSOLE_FREQ     BOARD_BUSCLK_FREQ
+#  define CONSOLE_BAUD     CONFIG_UART1_BAUD
+#  define CONSOLE_BITS     CONFIG_UART1_BITS
+#  define CONSOLE_PARITY   CONFIG_UART1_PARITY
+#elif defined(CONFIG_UART2_SERIAL_CONSOLE)
+#  define CONSOLE_BASE     LPC11_UART2_BASE
+#  define CONSOLE_FREQ     BOARD_BUSCLK_FREQ
+#  define CONSOLE_BAUD     CONFIG_UART2_BAUD
+#  define CONSOLE_BITS     CONFIG_UART2_BITS
+#  define CONSOLE_PARITY   CONFIG_UART2_PARITY
+#endif
+
+/**************************************************************************
+ * Private Types
+ **************************************************************************/
+
+/**************************************************************************
+ * Private Function Prototypes
+ **************************************************************************/
+
+/**************************************************************************
+ * Global Variables
+ **************************************************************************/
+
+/**************************************************************************
+ * Private Variables
+ **************************************************************************/
+
+/**************************************************************************
+ * Private Functions
+ **************************************************************************/
+
+/**************************************************************************
+ * Public Functions
+ **************************************************************************/
+
+/**************************************************************************
+ * Name: up_lowgetc
+ *
+ * Description:
+ *   Input one byte from the serial console
+ *
+ **************************************************************************/
+
+int lpc11_lowgetc(void)
+{
+  uint8_t ch = 0;
+
+#if defined HAVE_UART && defined HAVE_CONSOLE
+  /* Wait while the Receiver Data Ready (RDR) is indicating a "empty" FIFO to
+   * assure that we have data in the buffer to read.
+   */
+
+  while ((getreg32(CONSOLE_BASE+LPC11_UART_LSR_OFFSET) & UART_LSR_RDR) == 0);
+
+ /* Then read a character from the UART data register */
+
+  ch = getreg8(CONSOLE_BASE+LPC11_UART_RBR_OFFSET);
+#endif
+
+  return (int)ch;
+}

arch/arm/src/lpc11xx/lpc11_lowgetc.h

@@ -0,0 +1,81 @@
+/************************************************************************************
+ * arch/arm/src/lpc11/lpc11_lowgetc.h
+ *
+ *   Copyright (C) 2015 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************************************/
+
+#ifndef __ARCH_ARM_SRC_LPC11XX_LPC11_LOWGETC_H
+#define __ARCH_ARM_SRC_LPC11XX_LPC11_LOWGETC_H
+
+/************************************************************************************
+ * Included Files
+ ************************************************************************************/
+
+#include <nuttx/config.h>
+
+/************************************************************************************
+ * Pre-processor Definitions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Public Types
+ ************************************************************************************/
+
+/************************************************************************************
+ * Public Data
+ ************************************************************************************/
+
+#ifndef __ASSEMBLY__
+
+#undef EXTERN
+#if defined(__cplusplus)
+#define EXTERN extern "C"
+extern "C"
+{
+#else
+#define EXTERN extern
+#endif
+
+/************************************************************************************
+ * Public Functions
+ ************************************************************************************/
+
+#ifdef HAVE_SERIAL_CONSOLE
+int lpc11_lowgetc(void);
+#endif
+
+#undef EXTERN
+#if defined(__cplusplus)
+}
+#endif
+#endif /* __ASSEMBLY__ */
+#endif /* __ARCH_ARM_SRC_LPC11XX_LPC11_LOWGETC_H */

arch/arm/src/lpc11xx/lpc11_serial.c

@@ -1039,4 +1039,19 @@ int up_putc(int ch)
   return ch;
 }
 
+/****************************************************************************
+ * Name: up_getc
+ *
+ * Description:
+ *   Provide priority, low-level access to support OS debug writes
+ *
+ ****************************************************************************/
+
+int up_getc(void)
+{
+  /* Check for LF */
+
+  return lpc11_lowgetc();
+}
+
 #endif /* USE_SERIALDRIVER */