LPC43 update

git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5001 42af7a65-404d-4744-a932-0658087f49c3

configs/lpc4330-xplorer/README.txt

@@ -901,6 +901,16 @@ Where <subdir> is one of the following:
       CONFIG_BOOT_SRAM=y             : Executing in SRAM
       CONFIG_LPC32_CODEREDW=y        : Code Red under Windows
 
+    To execute from SRAM, you would need to set:
+
+      CONFIG_BOOT_SPIFI=y            : Executing from SPIFI
+      CONFIG_DRAM_SIZE=(128*1024)    : SRAM Bank0 size
+      CONFIG_DRAM_START=0x10000000   : SRAM Bank0 base address
+      CONFIG_SPIFI_OFFSET=(128*1024) : SPIFI file system offset
+
+    CONFIG_MM_REGIONS should also be increased if you want to other SRAM banks
+    to the memory pool.
+
     This configuration has some special options that can be used to
     create a block device on the SPIFI FLASH.  NOTE:  CONFIG_LPC43_SPIFI=y
     must also be defined to enable SPIFI setup support:
@@ -923,7 +933,7 @@ Where <subdir> is one of the following:
       CONFIG_SPIFI_READONLY - Define to support only read-only operations.
       CONFIG_SPIFI_LIBRARY - Don't use the LPC43xx ROM routines but, instead,
         use an external library implementation of the SPIFI interface.
-      CONFIG_SPIFI_VERIFY - Verify all spi_program() operations by reading
+      CONFIG_SPIFI_VERIFY - Verify all spifi_program() operations by reading
         from the SPI address space after each write.
       CONFIG_DEBUG_SPIFI_DUMP - Debug option to dump read/write buffers.  You
         probably do not want to enable this unless you want to dig through a

configs/lpc4330-xplorer/include/board.h

@@ -193,7 +193,7 @@
 #define BOARD_UART1_BASEFREQ        BOARD_XTAL_FREQUENCY
 
 #define BOARD_USART2_CLKSRC         BASE_USART2_CLKSEL_XTAL
-#define BOARD_USART3_BASEFREQ       BOARD_XTAL_FREQUENCY
+#define BOARD_USART2_BASEFREQ       BOARD_XTAL_FREQUENCY
 
 #define BOARD_USART3_CLKSRC         BASE_USART3_CLKSEL_XTAL
 #define BOARD_USART3_BASEFREQ       BOARD_XTAL_FREQUENCY
@@ -266,6 +266,14 @@
 #define PINCONF_U1_TXD  PINCONF_U1_TXD_1
 #define PINCONF_U1_RXD  PINCONF_U1_RXD_1
 
+#define PINCONF_U2_TXD  PINCONF_U2_TXD_1
+#define PINCONF_U2_RXD  PINCONF_U2_RXD_1
+#define PINCONF_U2_DIR  PINCONF_U2_DIR_1
+
+#define PINCONF_U3_TXD  PINCONF_U3_TXD_2
+#define PINCONF_U3_RXD  PINCONF_U3_RXD_2
+#define PINCONF_U3_DIR  PINCONF_U3_DIR_2
+
 /****************************************************************************
  * Public Types
  ****************************************************************************/

configs/lpc4330-xplorer/nsh/Make.defs

@@ -104,7 +104,7 @@ ifeq ($(CONFIG_BOOT_SRAM),y)
   LDSCRIPT = ramconfig.ld
 endif
 ifeq ($(CONFIG_BOOT_SPIFI),y)
-  LDSCRIPT = spiconfig.ld
+  LDSCRIPT = spificonfig.ld
 endif
 ifeq ($(CONFIG_BOOT_FLASHA),y)
   LDSCRIPT = flashaconfig.ld

configs/lpc4330-xplorer/nsh/defconfig

@@ -696,7 +696,7 @@ CONFIG_MMCSD_HAVECARDDETECT=n
 #   CONFIG_SPIFI_READONLY - Define to support only read-only operations.
 #   CONFIG_SPIFI_LIBRARY - Don't use the LPC43xx ROM routines but, instead,
 #     use an external library implementation of the SPIFI interface.
-#   CONFIG_SPIFI_VERIFY - Verify all spi_program() operations by reading
+#   CONFIG_SPIFI_VERIFY - Verify all spifi_program() operations by reading
 #     from the SPI address space after each write.
 #   CONFIG_DEBUG_SPIFI_DUMP - Debug option to dump read/write buffers.  You
 #     probably do not want to enable this unless you want to dig through a

configs/lpc4330-xplorer/ostest/Make.defs

@@ -104,7 +104,7 @@ ifeq ($(CONFIG_BOOT_SRAM),y)
   LDSCRIPT = ramconfig.ld
 endif
 ifeq ($(CONFIG_BOOT_SPIFI),y)
-  LDSCRIPT = spiconfig.ld
+  LDSCRIPT = spificonfig.ld
 endif
 ifeq ($(CONFIG_BOOT_FLASHA),y)
   LDSCRIPT = flashaconfig.ld

configs/lpc4330-xplorer/scripts/spificonfig.ld

@@ -1,5 +1,5 @@
 /****************************************************************************
- * configs/lpc4330-xplorer/scripts/spiconfig.ld
+ * configs/lpc4330-xplorer/scripts/spificonfig.ld
  *
  *   Copyright (C) 2012 Gregory Nutt. All rights reserved.
  *   Author: Gregory Nutt <gnutt@nuttx.org>

configs/lpc4330-xplorer/src/Makefile

@@ -77,7 +77,7 @@ CSRCS		+= $(SPIFI_LIB)/spifi_rom_api.c
 #CSRCS		+= $(SPIFI_LIB)/numonyx.c
 CSRCS		+= $(SPIFI_LIB)/spansion.c
 #CSRCS		+= $(SPIFI_LIB)/sst.c
-#CSRCS		+= $(SPIFI_LIB)/winbond.c
+CSRCS		+= $(SPIFI_LIB)/winbond.c
 endif
 
 AOBJS		= $(ASRCS:.S=$(OBJEXT))