This is a port of NuttX to the STM32L4 Family

Used development boards are the Nucleo L476RG, Nucleo L496ZG and
STM32L4VGDiscovery

Most code is copied and adapted from the STM32 Port.

TODO list
---------

Peripherals with implementation in STM32 port:

IRQs     : OK
GPIO     : OK
EXTI     : OK, to be tested.
HSI      : OK
HSE      : OK
PLL      : Works @ 80 MHz
MSI      : OK
LSE      : OK
RCC      : All registers defined, peripherals enabled, basic clock working
SYSCTL   : All registers defined
USART    : Working in normal mode (no DMA, to be tested, code is written)
DMA      : works; at least tested with QSPI
SRAM2    : OK; can be included in MM region or left separate for special app
         : purposes
FIREWALL : Code written, to be tested, requires support from ldscript
SPI      : OK, tested (Including DMA)
I2C      : Code written, to be tested
RTC      : works
QSPI     : works in polling, interrupt, DMA, and also memory-mapped modes
CAN      : OK, tested
OTGFS    : dev implemented, tested, outstanding issue with CDCACM
         : (ACM_SET_LINE_CODING, but otherwise works); host implemented,
         : only build smoke-tested (i.e. builds, but no functional testing
         : yet)
Timers   : Implemented, with PWM oneshot and freerun, tickless OS support.
         : Limited testing (focused on tickless OS so far), PWM and QE tested OK.
PM       : TODO, PWR registers defined
FSMC     : TODO
AES      : TODO
RNG      : works
CRC      : TODO (configurable polynomial)
WWDG     : TODO
IWDG     : works
MMCSD    : TODO
ADC      : TODO
DAC      : TODO
DMA2D    : TODO (Chrom-Art Accelerator for image manipulation)

New peripherals with implementation to be written from scratch
These are Low Priority TODO items, unless someone requests or contributes
it.

TSC      : TODO (Touch Screen Controller)
SWP      : TODO (Single wire protocol master, to connect with NFC enabled
         : SIM cards)
LPUART   : TODO (Low power UART working with LSE at low baud rates)
LPTIMER  : TODO (Low power TIMER)
OPAMP    : TODO (Analog operational amplifier)
COMP     : There is some code (Analog comparators)
DFSDM    : TODO (Digital Filter and Sigma-Delta Modulator)
LCD      : TODO (Segment LCD controller)
SAIPLL   : works (PLL For Digital Audio interfaces, and other things)
SAI      : There is some code (Digital Audio interfaces, I2S, SPDIF, etc)
HASH     : TODO (SHA-1, SHA-224, SHA-256, HMAC)
DCMI     : TODO (Digital Camera interfaces)
