Commit Graph

Select branches

Hide Pull Requests

edge

#108

#108

#109

#115

#115

#117

#120

#120

#137

#159

#159

#21

#21

#28

#38

#38

#41

#42

#42

#50

#50

#62

#62

#68

#9

v1.0d.20160831

v1.1f.20170717

v1.1f.20170802

Mono Color

• 8c103d09eb Corrected units of default acceleration values Martin Stingl 2014-03-10 20:37:12 +01:00
• 2168bb1cf9 Merge pull request #368 from henols/dev Sonny Jeon 2014-03-07 14:07:43 -07:00
• 3d053d800c Probing command gets stuck in hold if several g38.2 are submitted Ex. G0 X0 Y0 Z0 G38.2 Z-10 F100 G10 L20 P0 Z0 G0 Z2 G38.2 Z-1 F50 G10 L20 P0 Z0 G0 Z2 G0 X0 Y0 G38.2 Z-1 F100 G0 Z2 henols 2014-03-07 19:33:57 +01:00
• 76ab1b6a42 G38.2 probe feature rough draft installed. Working but needs testing. Sonny Jeon 2014-02-28 22:03:26 -07:00
• 4d7ca76f6c Probe cycle line numbers ifdef fixes to get it to compile. Sonny Jeon 2014-02-27 22:30:24 -07:00
• 387a1b9f84 Merge pull request #362 from robgrz/dev Sonny Jeon 2014-02-27 20:51:38 -07:00
• 8f8d8e2887 Added grbl planner Matlab simulator for test reference. Updated line number compile-time option. Sonny Jeon 2014-02-26 12:10:07 -07:00
• 0a46dfe0b9 Minimal probing cycle working. Supports both G38.2 for error and G38.3 when no errors are desired. Robert Grzesek 2014-02-25 12:19:52 -08:00
• 1fd45791a5 Minor updates to line number feature. Sonny Jeon 2014-02-19 07:48:09 -07:00
• 9c95c1439f Merge pull request #356 from robgrz/dev Sonny Jeon 2014-02-19 07:32:51 -07:00
• b332d6edbb Commenting updates. Minor bug fix with exit of soft limit event. Sonny Jeon 2014-02-19 07:21:40 -07:00
• 2307563d8a Merge commit 'cd71a90ce8a770e0030ed6c9bac805b89724e275' into dev Robert Grzesek 2014-02-18 18:23:39 -08:00
• 3df61e0ec5 Homing and feed hold bug fixes. Sonny Jeon 2014-02-15 13:13:46 -07:00
• 50fbc6e297 Refactoring and lots of bug fixes. Updated homing cycle. Sonny Jeon 2014-02-09 10:46:34 -07:00
• cd71a90ce8 Made line number reporting optional via config.h Robert Grzesek 2014-02-06 15:19:30 -08:00
• 6fdb35a7da Initial line number reporting Robert Grzesek 2014-02-06 15:10:27 -08:00
• c3e4ca7301 Update README.md Sonny Jeon 2014-02-02 10:45:40 -07:00
• 443f01de77 Merge pull request #337 from michmerr/edge Jens Geisler 2014-01-28 23:22:37 -08:00
• 59e906f7e8 Simplify setting of STATE_CYCLE and ISR interval. michmerr 2014-01-28 11:37:31 -08:00
• 783100db7d Make sure that cycle_start state is set before simulating steps. michmerr 2014-01-22 22:30:08 -08:00
• cdb6de3f4b Update README.md Sonny Jeon 2014-01-15 07:56:02 -05:00
• 3bb92b2530 Update README.md Sonny Jeon 2014-01-14 10:37:37 -05:00
• cc9afdc195 Lots of re-organization and cleaning-up. Some bug fixes. Sonny Jeon 2014-01-10 20:22:10 -07:00
• 7a85ab896d Updates to some stepper algorithm commenting Sonny Jeon 2014-01-05 11:54:59 -07:00
• 3c3382ff75 New build info feature. (per @Analogreality request) Sonny Jeon 2014-01-05 10:27:34 -07:00
• 1baff785f5 Variable spindle output. Resolved conflicts in last push. Sonny Jeon 2014-01-04 12:13:49 -07:00
• 8b5f306851 Cleaned up variable spindle output (PWM). Code and config comments. Sonny Jeon 2014-01-04 12:12:44 -07:00
• 0104cad56a Merge pull request #322 from EliteEng/dev Sonny Jeon 2014-01-03 06:23:39 -08:00
• 1c4097352d Update to fix compile error Rob Brown 2014-01-03 19:35:56 +08:00
• e7cd94e2bc Merge pull request #318 from EliteEng/dev Sonny Jeon 2014-01-02 16:56:02 -08:00
• ce5f94d675 Update spindle_control.c Rob Brown 2014-01-03 07:42:22 +08:00
• f8dd8fa54d Fix for M7/8/9 modal group checks. Updated AMASS frequency cutoffs and code cleaned. Sonny Jeon 2014-01-02 12:12:35 -07:00
• 4f987d2a5e Update README.md Sonny Jeon 2014-01-02 09:24:46 -07:00
• c0381799eb PWM Spindle Control and Invert Spindle & Coolant Pins Rob Brown 2014-01-02 12:42:22 +08:00
• f10bad43b2 Minor bug fixes: Homing travel calculations. Cycle resuming after spindle and dwell commands. Sonny Jeon 2013-12-30 22:02:05 -07:00
• 15a803e36f Merge pull request #201 from Protoneer/master Sonny Jeon 2013-12-30 20:23:54 -08:00
• 47cd40c8dc Incomplete push but working. Lots more stuff. More to come. Sonny Jeon 2013-12-30 18:44:46 -07:00
• 5ab2bb7767 Incomplete dev code push, but working. Lots of updates/fixes/improvements. Much still to polish. Sonny Jeon 2013-12-29 20:51:48 -07:00
• bfb8639606 Merge branch 'dev' of https://github.com/grbl/grbl into dev Sonny Jeon 2013-12-29 20:36:00 -07:00
• 903b462b2e Merge branch 'dev' of https://github.com/grbl/grbl into dev Sonny Jeon 2013-12-29 20:34:51 -07:00
• 8550d2c3f9 Merge pull request #312 from scottrcarlson/dev Sonny Jeon 2013-12-27 12:26:27 -08:00
• eefc25be91 Hard Limits configured for active high. Scott R Carlson 2013-12-27 15:09:00 -05:00
• 331a2cd094 Update README.md Sonny Jeon 2013-12-10 22:36:35 -07:00
• 3054b2df77 Revamped homing cycle. Axis limits and max travel bug fixes. Build info. Refactored config.h. Sonny Jeon 2013-12-10 22:33:06 -07:00
• 76e7445a85 Merge pull request #301 from shapeoko/master Sonny Jeon 2013-12-10 11:02:45 -08:00
• bfa8ebcac1 added shapeoko2 profile Edward 2013-12-10 11:10:36 -06:00
• b562845d9d Deceleration to zero speed improvements. Update defaults. Sonny Jeon 2013-12-07 20:08:24 -07:00
• d00525d384 Pushed bug fixes. Updated readme. Sonny Jeon 2013-12-07 10:10:36 -07:00
• a87f25773c Pushed limits active high option. Updated defaults.h. Misc bug fixes. Cleaned up codebase. Sonny Jeon 2013-12-07 08:40:25 -07:00
• 2f6663a0b9 Reinstated feed holds into new stepper algorithm and planner. Rough draft, but working. Sonny Jeon 2013-12-04 21:49:24 -07:00
• cc3212d54a Merge pull request #289 from Travis-Snoozy/master Sonny Jeon 2013-11-23 14:04:36 -08:00
• e8345fdb88 Add support for active-high limit switches Travis Snoozy 2013-11-22 18:12:29 -08:00
• b36e30de2e Yet another major stepper algorithm and planner overhaul. Sonny Jeon 2013-11-22 17:35:58 -07:00
• 2eb5acaa33 Another merge fix. Sonny Jeon 2013-10-29 19:43:40 -06:00
• b8f0a2399e Merge fixes. Sonny Jeon 2013-10-29 19:28:44 -06:00
• 4402a9f74a Merge branch 'dev_2' into dev Sonny Jeon 2013-10-29 19:12:09 -06:00
• 4f9bcde40e Merge branch 'dev_2' into dev Sonny Jeon 2013-10-29 19:10:39 -06:00
• 0ac6c87196 Planner function call fix. More clean up. Sonny Jeon 2013-10-29 18:55:55 -06:00
• 27297d444b Updated comments. Changed stepper variable names to be more understandable. Added step locking note. Sonny Jeon 2013-10-29 08:31:48 -06:00
• f7429ec79b Cleaned up stepper and planner code. Sonny Jeon 2013-10-24 22:12:13 -06:00
• fe03216952 Merge pull request #279 from EliteEng/master Sonny Jeon 2013-10-21 19:19:26 -07:00
• a2457c4d70 Changed Stepper Pins Rob Brown 2013-10-18 10:06:07 +08:00
• 9b426d0c91 Merge pull request #278 from EliteEng/master Sonny Jeon 2013-10-17 07:09:08 -07:00
• 3e92fef3b4 Update Pin Change Interrupts so it works Rob Brown 2013-10-17 17:05:08 +08:00
• 0cb5756b53 Fine tuning of new stepper algorithm with protected planner. Adaptive step prediction for segment buffer. Sonny Jeon 2013-10-14 21:21:56 -06:00
• 8a10654b1c New stepper subsystem bug fixes. Sonny Jeon 2013-10-12 10:35:26 -06:00
• 805f0f219c Protected buffer works! Vast improvements to planner efficiency. Many things still broken with overhaul. Sonny Jeon 2013-10-09 09:33:22 -06:00
• 471a45a1b9 Merge pull request #263 from 0xPIT/master Sonny Jeon 2013-08-25 11:08:08 -07:00
• 24280f95a5 remove mcu argument for avr-size in makefile as it is not present in GNU Binutils 2.22 0xPIT 2013-08-25 14:54:10 +02:00
• 0894183991 Pin map definition cleanup. Sonny Jeon 2013-08-20 20:05:16 -06:00
• e24e67ffe2 Processor-independent pin mapping feature. Sonny Jeon 2013-08-19 15:07:47 -06:00
• b2a69c02cf Merge pull request #260 from elmom/master Sonny Jeon 2013-08-19 08:27:01 -07:00
• 7a175bd2db Push old dev_2 draft to work on other things. Sonny Jeon 2013-08-19 09:24:22 -06:00
• b2b5352e82 Merge pull request #229 from 0xPIT/patch-1 Sonny Jeon 2013-08-19 08:18:43 -07:00
• 72ef50b17d Refactor config.h to allow defaults for chips/boards with different pin mappings Elmo Mäntynen 2013-07-21 15:11:04 +03:00
• 689bc6d471 Added pin mapping list to docs, useful for porting Elmo Mäntynen 2013-07-21 13:54:14 +03:00
• 8c781e155c Make serial work with most chips by default Elmo Mäntynen 2013-07-21 12:45:45 +03:00
• d39abee37d fix command line parameter for avr-size 0xPIT 2013-05-16 21:48:44 +02:00
• fc5c497256 Updated readme Sonny Jeon 2013-04-05 09:32:20 -06:00
• ca563cf423 Increased g-code parser line buffer. Added line overflow feedback. Sonny Jeon 2013-04-05 09:29:07 -06:00
• 1fa3dad206 Updates to edge/dev. Line buffer increased/planner buffer decreased. Line overflow feedback. Sonny Jeon 2013-04-05 09:21:52 -06:00
• 08baabc63c Minor updates to code and commenting. Sonny Jeon 2013-03-28 10:11:34 -06:00
• 49f703bb2c Update README.md Sonny Jeon 2013-03-22 08:45:46 -06:00
• 3c9c516a47 Untested! Soft limits, max travel, homing changes, new settings. Sonny Jeon 2013-03-21 19:22:07 -06:00
• 33c6659523 Update README.md Sonny Jeon 2013-03-19 11:43:11 -06:00
• 96f7d9b78e G-code updates for G10 L2 and L20 Sonny Jeon 2013-03-19 11:35:19 -06:00
• e3cfa93d97 G-code updates for G10 L2 and L20. Sonny Jeon 2013-03-19 11:33:04 -06:00
• 61f2bd1bc3 Update planner.c Bertus Kruger 2013-03-13 18:41:52 +13:00
• f04489530a Update nuts_bolts.c Bertus Kruger 2013-03-13 18:29:28 +13:00
• aae1089051 Pushed minor changes. Thanks @Protoneer! Sonny Jeon 2013-03-12 18:10:24 -06:00
• cdcb4263e8 Merge pull request #200 from Protoneer/master Sonny Jeon 2013-03-12 17:09:54 -07:00
• 8e01fed143 Update gcode.c Bertus Kruger 2013-03-13 10:19:42 +13:00
• 5ecc661ec8 Update eeprom.h Bertus Kruger 2013-03-13 09:44:22 +13:00
• 7bb20a7505 Update eeprom.c Bertus Kruger 2013-03-13 09:43:04 +13:00
• 058cf3f13a Update gcode.c Bertus Kruger 2013-03-12 19:08:44 +13:00
• d376f03bd0 Update eeprom.c Bertus Kruger 2013-03-12 19:01:17 +13:00
• b06643a2e0 Bug fix to-do note on soft limit checks. Not yet completed. Sonny Jeon 2013-03-01 10:50:36 -07:00
• 74b2af3c2f Minor changes and added notes to soft limits routines. Sonny Jeon 2013-03-01 09:55:10 -07:00
• 7951b83294 Merge pull request #193 from bungao/soft_limts Sonny Jeon 2013-02-26 09:35:30 -08:00
• a0f430d188 bugfix: uninitiallized curr_block->new_entry_speed_sqr lead to step loss in some cases Jens Geisler 2013-02-26 08:40:43 +01:00