Rob Giseburt af26ad8966 100.26 // Merged fixes for #267 and PR #258

2017-04-21 11:53:01 -05:00

..

board

?

2017-04-09 17:33:06 -04:00

device

Made TMC2130 driver setup and queue messages as two steps. (Debuggability.)

2016-11-06 16:03:03 -06:00

g2core.xcodeproj

Adjust PrintrbotPlus Xcode target

2017-01-18 12:45:34 -06:00

settings

Merge pull request #258 from Dan211/edge

2017-04-21 11:46:35 -05:00

.gitattributes

Tweak gitattributes to treat .md and .txt ad text globally

2016-09-26 11:37:09 -05:00

.gitignore

100.00 // Major feature push - see README.md

2016-08-26 16:36:07 -05:00

asciitable.txt

Checkpoint $ej work

2016-09-02 12:13:29 -04:00

boards.mk

Testing probing on Othermill

2017-02-01 18:41:32 -05:00

canonical_machine.cpp

Resolved merge conflict with edge fb100.22

2017-03-12 13:56:00 -04:00

canonical_machine.h

Fixed text mode compile; fixed zero length move ends in cycle regression

2017-03-12 08:57:32 -04:00

config_app.cpp

-{me:null} and {md:null} now enable or disable all motors for compatability with chilipeppr -fixed some shapeoko configs, changed shapeoko2 config to single motor Y and added a dual Y config -fixed power management with gshield using the workaround described in issue #212

2017-03-27 19:43:22 -04:00

config_app.h

100.00 // Major feature push - see README.md

2016-08-26 16:36:07 -05:00

config.cpp

Resolved merge conflict with edge fb100.22

2017-03-12 13:56:00 -04:00

config.h

Resolved merge conflict with edge fb100.22

2017-03-12 13:56:00 -04:00

controller.cpp

Review and formatting. No code changes other than {} wrappers in some places in bio where they were missing

2017-02-24 10:58:15 -05:00

controller.h

Improve handling of too-long lines, and up minimum buffers to 512bytes.

2017-02-06 16:57:05 -06:00

coolant.cpp

100.00 // Major feature push - see README.md

2016-08-26 16:36:07 -05:00

coolant.h

100.00 // Major feature push - see README.md

2016-08-26 16:36:07 -05:00

cycle_homing.cpp

Isolated Gcode parser

2017-01-12 10:54:16 -05:00

cycle_jogging.cpp

Fixes and regressions for G28/G30 operating in absolute_distance_mode; Most of the files are the change from ABSOLUTE_MODE to ABSOLUTE_DISTANCE_MODE and similar for INCREMENTAL_MODE.

2017-01-02 10:24:29 -05:00

cycle_probing.cpp

resolved merge conflicts

2017-02-23 11:11:03 -05:00

encoder.cpp

100.00 // Major feature push - see README.md

2016-08-26 16:36:07 -05:00

encoder.h

100.00 // Major feature push - see README.md

2016-08-26 16:36:07 -05:00

error.h

resolved merge conflicts

2017-02-23 11:11:03 -05:00

g2core_info.h

100.26 // Merged fixes for #267 and PR #258

2017-04-21 11:53:01 -05:00

g2core.cppproj

Fixed issue #263 - G10 L20 commands not working

2017-04-10 08:18:17 -04:00

g2core.h

Corrected Issue #249 - G2/G3 radius mode resulting in Arc specification error - missing offset(s)

2017-03-12 13:17:15 -04:00

gcode_parser.cpp

Fixed issue #263 - G10 L20 commands not working

2017-04-10 08:18:17 -04:00

gcode_parser.h

Isolated Gcode parser

2017-01-12 10:54:16 -05:00

gpio.cpp

handle alarm cases; revise error language; update text mode displays for probe function

2017-02-01 09:45:13 -05:00

gpio.h

Resolved merge conflict with edge fb100.22

2017-03-12 13:56:00 -04:00

help.cpp

100.00 // Major feature push - see README.md

2016-08-26 16:36:07 -05:00

help.h

100.00 // Major feature push - see README.md

2016-08-26 16:36:07 -05:00

json_parser.cpp

Correct handling of G28 responses (suppress them) and re-enable startup message for PB Hub.

2017-02-01 20:55:10 -06:00

json_parser.h

Another pass at Marlin Compatibility mode. Functional enough to test.

2017-01-20 14:36:21 -06:00

kinematics.cpp

100.00 // Major feature push - see README.md

2016-08-26 16:36:07 -05:00

kinematics.h

100.00 // Major feature push - see README.md

2016-08-26 16:36:07 -05:00

LICENSE-gpl-2.0.txt

100.00 // Major feature push - see README.md

2016-08-26 16:36:07 -05:00

main.cpp

Improve handling of too-long lines, and up minimum buffers to 512bytes.

2017-02-06 16:57:05 -06:00

Makefile

Fix typo: DEBUG=0 (or no DEBUG mentioned) should work right now.

2017-02-23 09:51:46 -06:00

marlin_compatibility.cpp

Fix marlin compatibility bed controls not working.

2017-03-21 22:23:57 -05:00

marlin_compatibility.h

Fixed issue #263 - G10 L20 commands not working

2017-04-10 08:18:17 -04:00

openocd.cfg.example

100.00 // Major feature push - see README.md

2016-08-26 16:36:07 -05:00

persistence.cpp

Disabled soft limits during probing; Some cleanup

2017-01-31 11:56:46 -05:00

persistence.h

100.00 // Major feature push - see README.md

2016-08-26 16:36:07 -05:00

plan_arc.cpp

Corrected Issue #249 - G2/G3 radius mode resulting in Arc specification error - missing offset(s)

2017-03-12 13:17:15 -04:00

plan_arc.h

100.00 // Major feature push - see README.md

2016-08-26 16:36:07 -05:00

plan_exec.cpp

Fixed regression for JSON wrapped code where ’n’ is reported (was failing on read-only)

2017-03-12 09:24:16 -04:00

plan_line.cpp

Fixed regression for JSON wrapped code where ’n’ is reported (was failing on read-only)

2017-03-12 09:24:16 -04:00

plan_zoid.cpp

Disabling broken test code in void.

2017-01-10 16:51:15 -06:00

planner.cpp

Improve handling of too-long lines, and up minimum buffers to 512bytes.

2017-02-06 16:57:05 -06:00

planner.h

Adjust meet_iteration debug variable to not be unsigned (so -1 is valid)

2017-02-08 13:54:26 -06:00

pwm.cpp

Disable alarm when the spindle PWM pin is not defined.

2017-01-05 14:57:06 -06:00

pwm.h

100.00 // Major feature push - see README.md

2016-08-26 16:36:07 -05:00

report.cpp

Marlin: Now requests line resend on non-sequential line numbers, and for checksum failures.

2017-02-08 13:53:07 -06:00

report.h

Fixed JSON exception handling for communications settings. Now passes regression tests for g2-0.99/002-config/02-settings/settings-comm-??.json; Note: This changes the behaviors of SI, which now returns an error for an underage error instead of sticking at the minimum value.

2016-12-30 10:54:23 -05:00

settings.h

100.00 // Major feature push - see README.md

2016-08-26 16:36:07 -05:00

spindle.cpp

Isolated Gcode parser

2017-01-12 10:54:16 -05:00

spindle.h

Isolated Gcode parser

2017-01-12 10:54:16 -05:00

stepper.cpp

Fix for MOTOR_POWERED_IN_CYCLE motors disabling during long M101 waits

2017-02-23 09:20:38 -06:00

stepper.h

Working on JSON settings for motors. Installed SU handlers and revised helpers, preprocess float, and “_get_this” primitives. Added proper range checking for some motor parameters. Runs all regression up through motor-po. Fails on motor-pm.

2016-12-31 11:40:33 -05:00

temperature.cpp

Adjust temperature.cpp to allow a different timeout for the heat bed, and adjust the thermistor settings for the third heater (the bed).

2017-04-05 14:33:25 -05:00

temperature.h

Minor adjustments to temperature controls (and a typo fix).

2017-02-01 20:58:29 -06:00

text_parser.cpp

Fixed $out1=1 not working. Also a bug in get_grp() that appears as repeated ’c’ group parameters in the $$ dump

2016-09-04 13:24:53 -04:00

text_parser.h

100.00 // Major feature push - see README.md

2016-08-26 16:36:07 -05:00

util.cpp

Fixed various JSON error cases where key is missing or blank, where value is missing or blank.

2016-12-30 10:18:04 -05:00

util.h

Refactor tool (startup tool is 1 now), speedup marlin temp display, added str_concat utility.

2017-01-24 17:02:08 -06:00

xio.cpp

Fixed issue #263 - G10 L20 commands not working

2017-04-10 08:18:17 -04:00

xio.h

Fixed issue #263 - G10 L20 commands not working

2017-04-10 08:18:17 -04:00