Changed structure of scripts subdirectory.

script/sysconfig/ethercat

@@ -0,0 +1,58 @@
+#------------------------------------------------------------------------------
+#
+#  EtherCAT sysconfig file
+#
+#  $Id$
+#
+#------------------------------------------------------------------------------
+
+#
+#  PCI index of the (RTL8139-)EtherCAT device
+#  Setting this is mandatory for the EtherCAT init script!
+#
+#DEVICE_INDEX=99
+
+#
+#  Number of Ethernet-over-EtherCAT interfaces every master shall create
+#  on startup. Default is 0.
+#
+#EOE_INTERFACES=0
+
+#
+#  Bridge all EoE interfaces after master startup
+#  This variable shall contain the name of the EoE bridge to set up.
+#  If the variable is empty or undefined, no EoE bridge will be built.
+#
+#EOE_BRIDGE=eoebr0
+
+#
+#  IP address of the EoE bridge
+#  Set both EOE_IP_ADDRESS and EOE_IP_NETMASK to let the local host communicate
+#  with devices on the EoE bridge.
+#
+#EOE_IP_ADDRESS=192.168.X.X
+
+#
+#  IP netmask of the EoE bridge
+#  See EOE_IP_ADDRESS.
+#
+#EOE_IP_NETMASK=255.255.255.0
+
+#
+#  Renew default gateway after bridge installation.
+#  Set this to the new default gateway, if the default route shall
+#  be renewed after the bridge has been installed.
+#
+#EOE_GATEWAY=192.168.X.X
+
+#
+#  List of extra interfaces to include in the EoE bridge.
+#  Set this to interconnect the EoE bridge with other local interfaces.
+#  If EOE_BRIDGE is empty or undefined, setting this variable has no effect.
+#  Important: The IP address of these interfaces will be cleared. Set
+#  EOE_IP_ADDRESS and EOE_IP_NETMASK accordingly to enable IP traffic to
+#  extra interfaces.
+#
+#EOE_EXTRA_INTERFACES=eth0
+
+#------------------------------------------------------------------------------