[gpio] Skip set_inverted() call for default false value (#11538)

esphome/components/esp32/gpio.h

@@ -40,13 +40,13 @@ class ESP32InternalGPIOPin : public InternalGPIOPin {
   // - 3 bytes for members below
   // - 1 byte padding for alignment
   // - 4 bytes for vtable pointer
-  uint8_t pin_;        // GPIO pin number (0-255, actual max ~54 on ESP32)
-  gpio::Flags flags_;  // GPIO flags (1 byte)
+  uint8_t pin_;          // GPIO pin number (0-255, actual max ~54 on ESP32)
+  gpio::Flags flags_{};  // GPIO flags (1 byte)
   struct PinFlags {
     uint8_t inverted : 1;        // Invert pin logic (1 bit)
     uint8_t drive_strength : 2;  // Drive strength 0-3 (2 bits)
     uint8_t reserved : 5;        // Reserved for future use (5 bits)
-  } pin_flags_;                  // Total: 1 byte
+  } pin_flags_{};                // Total: 1 byte
   // NOLINTNEXTLINE(cppcoreguidelines-avoid-non-const-global-variables)
   static bool isr_service_installed;
 };

esphome/components/esp32/gpio.py

@@ -223,7 +223,10 @@ async def esp32_pin_to_code(config):
     var = cg.new_Pvariable(config[CONF_ID])
     num = config[CONF_NUMBER]
     cg.add(var.set_pin(getattr(gpio_num_t, f"GPIO_NUM_{num}")))
-    cg.add(var.set_inverted(config[CONF_INVERTED]))
+    # Only set if true to avoid bloating setup() function
+    # (inverted bit in pin_flags_ bitfield is zero-initialized to false)
+    if config[CONF_INVERTED]:
+        cg.add(var.set_inverted(True))
     if CONF_DRIVE_STRENGTH in config:
         cg.add(var.set_drive_strength(config[CONF_DRIVE_STRENGTH]))
     cg.add(var.set_flags(pins.gpio_flags_expr(config[CONF_MODE])))

esphome/components/esp8266/gpio.h

@@ -29,8 +29,8 @@ class ESP8266GPIOPin : public InternalGPIOPin {
   void attach_interrupt(void (*func)(void *), void *arg, gpio::InterruptType type) const override;
 
   uint8_t pin_;
-  bool inverted_;
-  gpio::Flags flags_;
+  bool inverted_{};
+  gpio::Flags flags_{};
 };
 
 }  // namespace esp8266

esphome/components/esp8266/gpio.py

@@ -165,7 +165,10 @@ async def esp8266_pin_to_code(config):
     num = config[CONF_NUMBER]
     mode = config[CONF_MODE]
     cg.add(var.set_pin(num))
-    cg.add(var.set_inverted(config[CONF_INVERTED]))
+    # Only set if true to avoid bloating setup() function
+    # (inverted bit in pin_flags_ bitfield is zero-initialized to false)
+    if config[CONF_INVERTED]:
+        cg.add(var.set_inverted(True))
     cg.add(var.set_flags(pins.gpio_flags_expr(mode)))
     if num < 16:
         initial_state: PinInitialState = CORE.data[KEY_ESP8266][KEY_PIN_INITIAL_STATES][

esphome/components/host/gpio.h

@@ -28,8 +28,8 @@ class HostGPIOPin : public InternalGPIOPin {
   void attach_interrupt(void (*func)(void *), void *arg, gpio::InterruptType type) const override;
 
   uint8_t pin_;
-  bool inverted_;
-  gpio::Flags flags_;
+  bool inverted_{};
+  gpio::Flags flags_{};
 };
 
 }  // namespace host

esphome/components/host/gpio.py

@@ -57,6 +57,9 @@ async def host_pin_to_code(config):
     var = cg.new_Pvariable(config[CONF_ID])
     num = config[CONF_NUMBER]
     cg.add(var.set_pin(num))
-    cg.add(var.set_inverted(config[CONF_INVERTED]))
+    # Only set if true to avoid bloating setup() function
+    # (inverted bit in pin_flags_ bitfield is zero-initialized to false)
+    if config[CONF_INVERTED]:
+        cg.add(var.set_inverted(True))
     cg.add(var.set_flags(pins.gpio_flags_expr(config[CONF_MODE])))
     return var

esphome/components/libretiny/gpio.py

@@ -199,6 +199,9 @@ async def component_pin_to_code(config):
     var = cg.new_Pvariable(config[CONF_ID])
     num = config[CONF_NUMBER]
     cg.add(var.set_pin(num))
-    cg.add(var.set_inverted(config[CONF_INVERTED]))
+    # Only set if true to avoid bloating setup() function
+    # (inverted bit in pin_flags_ bitfield is zero-initialized to false)
+    if config[CONF_INVERTED]:
+        cg.add(var.set_inverted(True))
     cg.add(var.set_flags(pins.gpio_flags_expr(config[CONF_MODE])))
     return var

esphome/components/libretiny/gpio_arduino.h

@@ -27,8 +27,8 @@ class ArduinoInternalGPIOPin : public InternalGPIOPin {
   void attach_interrupt(void (*func)(void *), void *arg, gpio::InterruptType type) const override;
 
   uint8_t pin_;
-  bool inverted_;
-  gpio::Flags flags_;
+  bool inverted_{};
+  gpio::Flags flags_{};
 };
 
 }  // namespace libretiny

esphome/components/nrf52/gpio.py

@@ -74,6 +74,9 @@ async def nrf52_pin_to_code(config):
     var = cg.new_Pvariable(config[CONF_ID])
     num = config[CONF_NUMBER]
     cg.add(var.set_pin(num))
-    cg.add(var.set_inverted(config[CONF_INVERTED]))
+    # Only set if true to avoid bloating setup() function
+    # (inverted bit in pin_flags_ bitfield is zero-initialized to false)
+    if config[CONF_INVERTED]:
+        cg.add(var.set_inverted(True))
     cg.add(var.set_flags(pins.gpio_flags_expr(config[CONF_MODE])))
     return var

esphome/components/rp2040/gpio.h

@@ -29,8 +29,8 @@ class RP2040GPIOPin : public InternalGPIOPin {
   void attach_interrupt(void (*func)(void *), void *arg, gpio::InterruptType type) const override;
 
   uint8_t pin_;
-  bool inverted_;
-  gpio::Flags flags_;
+  bool inverted_{};
+  gpio::Flags flags_{};
 };
 
 }  // namespace rp2040

esphome/components/rp2040/gpio.py

@@ -94,6 +94,9 @@ async def rp2040_pin_to_code(config):
     var = cg.new_Pvariable(config[CONF_ID])
     num = config[CONF_NUMBER]
     cg.add(var.set_pin(num))
-    cg.add(var.set_inverted(config[CONF_INVERTED]))
+    # Only set if true to avoid bloating setup() function
+    # (inverted bit in pin_flags_ bitfield is zero-initialized to false)
+    if config[CONF_INVERTED]:
+        cg.add(var.set_inverted(True))
     cg.add(var.set_flags(pins.gpio_flags_expr(config[CONF_MODE])))
     return var

esphome/components/zephyr/gpio.h

@@ -26,10 +26,10 @@ class ZephyrGPIOPin : public InternalGPIOPin {
  protected:
   void attach_interrupt(void (*func)(void *), void *arg, gpio::InterruptType type) const override;
   uint8_t pin_;
-  bool inverted_;
-  gpio::Flags flags_;
-  const device *gpio_ = nullptr;
-  bool value_ = false;
+  bool inverted_{};
+  gpio::Flags flags_{};
+  const device *gpio_{nullptr};
+  bool value_{false};
 };
 
 }  // namespace zephyr