Peter Barker 4113290153 AP_HAL_ChibiOS: remove HerePro ...

to be replaced by a HereProAP

2024-02-15 13:42:14 +11:00

..

hwdef

AP_HAL_ChibiOS: remove HerePro

2024-02-15 13:42:14 +11:00

AnalogIn.cpp

AP_HAL_ChibiOS: Use correct pin config for ADC2 and ADC3

2024-01-24 08:03:24 +11:00

AnalogIn.h

…

AP_HAL_ChibiOS_Namespace.h

HAL_ChibiOS: implement BinarySemaphore

2024-01-03 07:37:05 +11:00

AP_HAL_ChibiOS_Private.h

…

AP_HAL_ChibiOS.h

…

bxcan.hpp

…

CANFDIface.cpp

HAL_ChibiOS: fixed CANFD timings (again!)

2024-02-09 18:55:08 +11:00

CANFDIface.h

HAL_ChibiOS: fixed CANFD timings

2024-01-25 11:44:02 +11:00

CanIface.cpp

HAL_ChibiOS: reimplement CAN with BinarySemaphore

2024-01-03 07:37:05 +11:00

CANIface.h

HAL_ChibiOS: reimplement CAN with BinarySemaphore

2024-01-03 07:37:05 +11:00

Device.cpp

…

Device.h

…

DSP.cpp

…

DSP.h

…

Flash.h

…

GPIO.cpp

HAL_ChibiOS: support building with no GPIOs

2024-01-21 12:30:08 +11:00

GPIO.h

…

HAL_ChibiOS_Class.cpp

AP_HAL_ChibiOS: Only test SPI clock if SPI is enabled

2024-01-10 13:46:40 +11:00

HAL_ChibiOS_Class.h

…

I2CDevice.cpp

…

I2CDevice.h

…

LogStructure.h

…

RCInput.cpp

…

RCInput.h

…

RCOutput_bdshot.cpp

AP_HAL_ChibiOS: allow bdshot iomcu on non-bdshot fmu

2023-12-18 19:02:52 +11:00

RCOutput_iofirmware.cpp

…

RCOutput_serial.cpp

AP_HAL_ChibiOS: ensure dshot commands are send to all FMU channels when IOMCU is present

2023-12-18 19:02:52 +11:00

RCOutput.cpp

…

RCOutput.h

AP_HAL_ChibiOS: allow bdshot iomcu on non-bdshot fmu

2023-12-18 19:02:52 +11:00

Scheduler.cpp

AP_HAL_ChibiOS: added PRIORITY_NET

2024-01-03 12:14:47 +11:00

Scheduler.h

AP_HAL_ChibiOS: added PRIORITY_NET

2024-01-03 12:14:47 +11:00

sdcard.cpp

HAL_ChibiOS: added mem_is_dma_safe() function

2024-01-05 06:52:11 -08:00

sdcard.h

…

Semaphores.cpp

HAL_ChibiOS: allow HAL_Semaphore in the bootloader

2024-01-21 12:30:08 +11:00

Semaphores.h

HAL_ChibiOS: implement BinarySemaphore

2024-01-03 07:37:05 +11:00

shared_dma.cpp

…

shared_dma.h

…

SoftSigReader.cpp

…

SoftSigReader.h

…

SoftSigReaderInt.cpp

…

SoftSigReaderInt.h

…

SPIDevice.cpp

…

SPIDevice.h

HAL_ChibiOS: fixed SPI build on F1xx

2023-12-20 19:33:12 +11:00

stdio.cpp

…

Storage.cpp

HAL_ChibiOS: support flash storage with 8k sectors

2024-02-01 11:43:24 +11:00

Storage.h

HAL_ChibiOS: support flash storage with 8k sectors

2024-02-01 11:43:24 +11:00

system.cpp

HAL_ChibiOS: switched G4 FDCAN clock to 80MHz

2024-01-25 11:44:02 +11:00

UARTDriver.cpp

HAL_ChibiOS: allow for up to 12.5MBps on H7 UARTs

2024-01-02 08:12:37 +11:00

UARTDriver.h

AP_HAL_ChibiOS: eliminate legacy UART ordering/references

2023-12-19 06:53:15 +11:00

Util.cpp

AP_HAL_ChibiOS: use HAL_LOGGING_ENABLED in place of HAL_BOOTLOADER_BUILD

2024-02-02 19:21:58 +11:00

Util.h

AP_HAL_ChibiOS: use @ROMFS/defaults.parm rather than apj_tool for defaul parms

2024-01-17 18:28:48 +11:00

WSPIDevice.cpp

…

WSPIDevice.h

…