Aaron Marburg
6eb0174bb5
Sub: When disarmed and in manual mode, set throttle out to neutral value.
...
If the sub is disarmed in many modes, the output "throttle" (vertical
control) is set to 0.0, corresponding to full downward thrust. While
this does not affect manual control, it can affect subsequent mode
changes (e.g. to ALT_HOLD). Set to a constant NEUTRAL_THROTTLE,
set to 0.5, instead.
2026-02-05 16:22:30 -03:00
Randy Mackay
8ba67d9eda
Sub: integrate ANGLE_MAX move to ATC
2026-01-28 08:45:12 +11:00
Leonard Hall
6419f811f9
Sub: NEU to NED renaming - No compiler change
2025-12-17 08:03:10 +09:00
Leonard Hall
4ca0e51d02
Sub: Emphasise sign of speed and acceleration limits
2025-11-21 13:01:44 +09:00
Leonard Hall
5fdd0dafa3
Sub: AC_PosControl: Correct sign of speed_down_ms to positive
2025-11-21 13:01:44 +09:00
Leonard Hall
f43e016d68
Sub: Naming Change No compiler change
2025-11-14 10:01:37 +11:00
Leonard Hall
b975ffb029
Sub: Convert to postype
2025-09-26 10:35:25 +09:00
Leonard Hall
5dbe7b9d7a
Copter: Convert Mode Auto to meters
2025-08-13 11:06:41 +09:00
Leonard Hall
4f6b492d94
Sub: Address PR feedback
2025-08-05 11:04:37 +09:00
Leonard Hall
c52a95b7d2
Copter: Guided: Fix/Add units and axis
2025-08-05 11:04:37 +09:00
Leonard Hall
071ddb88ff
Sub: AC_PosControl: Fix units on set_correction_speed_accel_U
2025-08-05 11:04:37 +09:00
Leonard Hall
4819ea342a
Sub: Support - AP_Math: Remove units on get_horizontal_distance
2025-07-17 09:12:37 +09:00
Leonard Hall
cba72b694c
Sub: Support - AC_PosControl: Add units to dt
2025-07-07 13:39:08 +09:00
Leonard Hall
d5323d84b4
Sub: Add units to Sub attitude functions
2025-06-18 20:34:26 +09:00
Peter Barker
6861848613
ArduSub: rename AHRS get_roll etc accessors to include _rad
2025-06-05 17:28:41 +10:00
Peter Barker
3d6d163f97
ArduSub: replace ToRad with radians and ToDeg with degrees
2025-05-29 11:24:56 +10:00
Leonard Hall
a151aadd3e
Sub: add units and frames to AC_WPNav methods
...
Sub
2025-05-02 21:47:07 +10:00
Leonard Hall
e9cbd59621
Sub: add units and frames to AC_AttitudeControl methods
2025-04-29 08:54:14 +09:00
Leonard Hall and Peter Barker
1eed87b267
ArduSub: add units and frames to AC_AttitudeControl methods
...
Co-authored-by: Peter Barker <pbarker@barker.dropbear.id.au >
2025-04-23 10:02:29 +10:00
Leonard Hall
6db90646b9
Sub: updates for offset handling
2024-10-04 09:25:56 +09:00
Clyde McQueen
075a5c3cee
Sub: reject guided mode destinations early
2024-09-18 12:32:55 -03:00
Clyde McQueen
9cf63a5407
Sub: fully init yaw control on guided submode start
2024-09-18 12:32:55 -03:00
Peter Barker
852944a1b1
Sub: correct compilation when HAL_LOGGING_ENABLED is false
2024-01-17 18:25:55 +11:00
Rakesh Vivekanandan
1127d1e678
Sub: Guided Mode: Improved guided_set_destination_posvel() to support handling of yaw control.
2023-07-28 15:38:01 -03:00
Rakesh Vivekanandan
79bf9dd05d
Sub: Guided Mode: Improved guided_set_velocity() and fixed Z-controller in guided_vel_control_run()
2023-07-28 15:38:01 -03:00
Rakesh Vivekanandan
d77ac1ae72
Sub: Guided Mode: Improved guided_set_destination() such that it can accept a desired yaw/yaw rate as input along with a position setpoint.
2023-07-28 15:38:01 -03:00
Rakesh Vivekanandan
6a36c05e4e
Sub: Guided Mode: Helper function guided_set_yaw_state() to set yaw state and targets when the vehicle is in guided mode.
2023-07-28 12:04:54 -03:00
Rakesh Vivekanandan
d8b171e52b
Sub: Introduced AUTO_YAW_RATE mode and its features.
2023-07-27 10:24:59 -03:00
Willian Galvani
7ebe3c4bf1
Sub: rename mode files from control_ to mode_
2023-07-13 14:56:40 -03:00