diff --git a/boards/modalai/fc-v1/init/rc.board_defaults b/boards/modalai/fc-v1/init/rc.board_defaults
index 197a39dded..1b6bd0ce42 100644
--- a/boards/modalai/fc-v1/init/rc.board_defaults
+++ b/boards/modalai/fc-v1/init/rc.board_defaults
@@ -11,7 +11,7 @@
 #   this script has a bit more Logic (aka Bobby Tarantino) than normal.
 #
 # Flight Core Version Information:
-#   V100 - Flight Core Stand Alone configuration
+#   V106 - Flight Core Stand Alone configuration
 #   V110 - Flight Core VOXL-Flight configuration
 #
 
@@ -22,7 +22,7 @@ if [ $AUTOCNF = yes ]
 then
 	#
 	# Disable safety switch by default (pull high to 3.3V to enable)
-	#  V100 - J13 pin 5
+	#  V106 - J13 pin 5
 	#  V110 - J1011 pin 5
 	#
 	param set CBRK_IO_SAFETY 22027
@@ -31,9 +31,9 @@ fi
 #
 # Stand Alone configuration
 #
-if ver hwtypecmp V100
+if ver hwtypecmp V106
 then
-	echo "Configuring Flight Core - V100"
+	echo "Configuring Flight Core - V106"
 
 	#
 	# In Flight Core, J1 and J4 can be setup to be used as serial ports for TELEM2
@@ -45,14 +45,14 @@ then
 	then
 		if param compare MAV_1_CONFIG 0
 		then
-			echo "V100 - Defualt configuration TELEM2 on /dev/ttyS4 at 921600 in Normal Mode"
+			echo "V106 - Defualt configuration TELEM2 on /dev/ttyS4 at 921600 in Normal Mode"
 			param set MAV_1_CONFIG 102 # TELEM2
 			param set MAV_1_MODE 0	# normal
 			param set SER_TEL2_BAUD 921600 # VIO data
 		fi
 		if param compare MAV_2_CONFIG 0
 		then
-			echo "V100 - Defualt configuration TELEM3 on /dev/ttyS1 at 57600 in Normal Mode"
+			echo "V106 - Defualt configuration TELEM3 on /dev/ttyS1 at 57600 in Normal Mode"
 			param set MAV_2_CONFIG 103 # TELEM3
 			param set MAV_2_MODE 0	# normal
 			param set SER_TEL3_BAUD 57600 # standard data
@@ -62,12 +62,12 @@ then
 	# User is setting defaults, so let's do it!
 	if [ $AUTOCNF = yes ]
 	then
-		echo "V100 - Auto Configuring TELEM2 on /dev/ttyS4 at 921600 in Normal Mode"
+		echo "V106 - Auto Configuring TELEM2 on /dev/ttyS4 at 921600 in Normal Mode"
 		param set MAV_1_CONFIG 102 # TELEM2
 		param set MAV_1_MODE 0	# normal
 		param set SER_TEL2_BAUD 921600 # VIO data
 
-		echo "V100 - Auto Configuring TELEM3 on /dev/ttyS1 at 57600 in Normal Mode"
+		echo "V106 - Auto Configuring TELEM3 on /dev/ttyS1 at 57600 in Normal Mode"
 		param set MAV_2_CONFIG 103 # TELEM3
 		param set MAV_2_MODE 0	# normal
 		param set SER_TEL3_BAUD 57600 # standard data
diff --git a/boards/modalai/fc-v1/src/board_config.h b/boards/modalai/fc-v1/src/board_config.h
index fda77a08da..e4444ca130 100644
--- a/boards/modalai/fc-v1/src/board_config.h
+++ b/boards/modalai/fc-v1/src/board_config.h
@@ -262,7 +262,7 @@
 
 #define BOARD_HAS_HW_VERSIONING
 
-#define GPIO_HW_VER_REV_DRIVE  /* PA4 */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTA|GPIO_PIN4)
+#define GPIO_HW_VER_REV_DRIVE  /* PG0 */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTG|GPIO_PIN0)
 #define GPIO_HW_REV_SENSE      /* PF5 */  ADC3_GPIO(15)
 #define GPIO_HW_VER_SENSE      /* PF4 */  ADC3_GPIO(14)
 #define HW_INFO_INIT           {'V','1','x', 'x',0}
diff --git a/boards/modalai/fc-v1/src/manifest.c b/boards/modalai/fc-v1/src/manifest.c
index 26c7b0d5f3..26b1e5b34f 100644
--- a/boards/modalai/fc-v1/src/manifest.c
+++ b/boards/modalai/fc-v1/src/manifest.c
@@ -71,6 +71,14 @@ static const px4_hw_mft_item_t device_unsupported = {0, 0, 0};
 // List of components on a specific board configuration
 // The index of those components is given by the enum (px4_hw_mft_item_id_t)
 // declared in board_common.h
+static const px4_hw_mft_item_t hw_mft_list_fc0006[] = {
+	{
+		.present     = 0,
+		.mandatory   = 0,
+		.connection  = px4_hw_con_unknown,
+	},
+};
+
 static const px4_hw_mft_item_t hw_mft_list_fc0100[] = {
 	{
 		.present     = 0,
@@ -79,17 +87,9 @@ static const px4_hw_mft_item_t hw_mft_list_fc0100[] = {
 	},
 };
 
-static const px4_hw_mft_item_t hw_mft_list_fc0110[] = {
-	{
-		.present     = 0,
-		.mandatory   = 0,
-		.connection  = px4_hw_con_unknown,
-	},
-};
-
 static px4_hw_mft_list_entry_t mft_lists[] = {
-	{0x0000, hw_mft_list_fc0100, arraySize(hw_mft_list_fc0100)},
-	{0x0100, hw_mft_list_fc0110, arraySize(hw_mft_list_fc0110)}
+	{0x0006, hw_mft_list_fc0006, arraySize(hw_mft_list_fc0006)},
+	{0x0100, hw_mft_list_fc0100, arraySize(hw_mft_list_fc0100)}
 };