diff --git a/boards/cuav/7-nano/default.px4board b/boards/cuav/7-nano/default.px4board
index eb1dc29bc37..5337f54d90a 100644
--- a/boards/cuav/7-nano/default.px4board
+++ b/boards/cuav/7-nano/default.px4board
@@ -20,6 +20,7 @@ CONFIG_DRIVERS_GPS=y
 CONFIG_DRIVERS_IMU_BOSCH_BMI088=y
 CONFIG_DRIVERS_IMU_INVENSENSE_ICM20948=y
 CONFIG_DRIVERS_IMU_INVENSENSE_IIM42652=y
+CONFIG_DRIVERS_IMU_INVENSENSE_IIM42653=y
 CONFIG_COMMON_INS=y
 CONFIG_COMMON_LIGHT=y
 CONFIG_COMMON_MAGNETOMETER=y
@@ -42,8 +43,8 @@ CONFIG_MODULES_EVENTS=y
 CONFIG_MODULES_FLIGHT_MODE_MANAGER=y
 CONFIG_MODULES_FW_ATT_CONTROL=y
 CONFIG_MODULES_FW_AUTOTUNE_ATTITUDE_CONTROL=y
-CONFIG_MODULES_FW_MODE_MANAGER=y
 CONFIG_MODULES_FW_LATERAL_LONGITUDINAL_CONTROL=y
+CONFIG_MODULES_FW_MODE_MANAGER=y
 CONFIG_MODULES_FW_RATE_CONTROL=y
 CONFIG_MODULES_GIMBAL=y
 CONFIG_MODULES_GYRO_CALIBRATION=y
diff --git a/boards/cuav/7-nano/init/rc.board_sensors b/boards/cuav/7-nano/init/rc.board_sensors
index 82a764962de..343a9a4e8b4 100644
--- a/boards/cuav/7-nano/init/rc.board_sensors
+++ b/boards/cuav/7-nano/init/rc.board_sensors
@@ -12,10 +12,17 @@ else
 fi
 
 iim42652 -s -R 22 start
-bmi088 -A -R 29 -s start
-bmi088 -G -R 29 -s start
 
-ist8310 -I -R 18 start
+bmi088 -A -R 29 -s start
+if ! bmi088 -G -R 29 -s start
+then
+	iim42653 -s -b 2 -R 22 start
+fi
+
+if ! ist8310 -I -R 18 start
+then
+	iis2mdc -I -R 37 start
+fi
 
 bmp581 -s start
 icp201xx -I start
diff --git a/boards/cuav/7-nano/src/spi.cpp b/boards/cuav/7-nano/src/spi.cpp
index f55a89563ca..05eb3697c6f 100644
--- a/boards/cuav/7-nano/src/spi.cpp
+++ b/boards/cuav/7-nano/src/spi.cpp
@@ -42,6 +42,7 @@ constexpr px4_spi_bus_t px4_spi_buses[SPI_BUS_MAX_BUS_ITEMS] = {
 	initSPIBus(SPI::Bus::SPI2, {
 		initSPIDevice(DRV_GYR_DEVTYPE_BMI088, SPI::CS{GPIO::PortG, GPIO::Pin2}, SPI::DRDY{GPIO::PortG, GPIO::Pin3}),
 		initSPIDevice(DRV_ACC_DEVTYPE_BMI088, SPI::CS{GPIO::PortH, GPIO::Pin5}, SPI::DRDY{GPIO::PortA, GPIO::Pin10}),
+		initSPIDevice(DRV_IMU_DEVTYPE_IIM42653, SPI::CS{GPIO::PortD, GPIO::Pin12}, SPI::DRDY{GPIO::PortA, GPIO::Pin10}),
 	}, {GPIO::PortI, GPIO::Pin11}),
 	// initSPIBus(SPI::Bus::SPI3,{
 	// 	// no devices